Hello everyone. I jsut got my Le Max 2 yesterday and noticed a very annoying issue. I can't send or receive MMS messages....that is unless I manually change my network from 4G to 3G. It's very strange that the phone doesn't do this itself.
I've entered in all the correct APN settings (this was needed in order for me to get 4G speeds. The downside is that it only stays on 4G unless i tell it to switch.
Some useful info:
I am on the stock rom 5.8.018S (stable)
I went into the menu via dialer *#*#4636#*#* and have selected LTE/GSM
I 'm on the Fido network in Canada (same as Rogers)
Will flashing another, newer rom solve my problem? Any help or advice would be appreciated!
I am with Freedom Mobile and do not have 4G. In the phone settings, dual SIM networks, network mode, even I set to 4G priority, I can get 3G without problem . In the *#*#4636#*#*, it was set to unknown by default. If you set it to LTE/GSM, I don't see how you can get 3G.
Amowagou said:
In the *#*#4636#*#*, it was set to unknown by default. If you set it to LTE/GSM, I don't see how you can get 3G.
Click to expand...
Click to collapse
If I don't set it to that I won't get LTE. I can also leave it at unknown but it'll stay on 4g at all times. Point is, unless I manually go and select 3G priority and have the phone stay in 3G I won't be able to send/receive MMS.
I'm also having issues with the LED. It only works for text messages but doesn't light up for Hangouts or email (emails don't push either). As you can see lots of annoying issues! I'm not sure it's worth keeping the phone unless flashing a rom will solve this things.
Related
I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
I can only tell you I have exactly the same problem. Using it with Mobilicity.
Let's hope someone will come up with a fix.
A guess is that it has to do with the order in which it is searching to network operators after it loses signal. I am not sure how the phone is hard coded, but it is possible that upon reboot, it checks the SIM for which network to lock on to, but without a reboot it is looking for T-Mobile, because that is hard coded into the phone.
This is all a guess, but perhaps setting it to Manual network selection instead of automatic would help lock it on your network.
^yes, I think if you take it off the auto setting in your mobile network, that may solve the problem. Even though I'm with TMO we had a 3g outage and while it was on auto the same message came up for me, even after the outage was over. Set it to wcdma only, and I was able to make calls and get back on the network.
Setting it to Manual will just force us to do it manually every time it gets disconnected.
Not a solution, unfortunately.
Thanks guys,
Is there an application perhaps that will search for available networks and register on the network of your choosing once found?
Orochi77 said:
I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
Click to expand...
Click to collapse
Where you able to find a solution to this problem? I'm having the same problem. Let me know. Thanks.
+1111111.... i meant plus 1... but yeah ...i'm having the same problem... Vibrant on Mobilicity w/ Froyo Rom from Axurus <-- i think thats how u spell it
Anyways, this happends while im at home, sitting on the same chair as i was when i had the 3G...and then boom..............3g just disappears and doesn't come back til' i restart....
Have you tried setting the mobile network to "WCDMA Only" ?
Mobilicity doesnt have a GSM network.
I have a problem with roaming.
I am on MTS who has joined with Rogers network.
On stock ROM: 2-6-35-7-i9100xwkf3-cl276555 rootdell101 #2
I go to the US
Phone works on roaming
Can receive SMS
Cannot send SMS - Send fails
I have since rooted and installed Alienware 2-6-35-11 ninphetamine 2.1.3 xxkh3
I go to the US
Phone has 4/5 bars and can't get on network to roam
can't send/receive SMS
when dialing get the Mobile network unavailable message
My wife's samsung galaxy S i897 works fine -
Swapping SIMs with her yields the same failures on my S2 with her SIM.
In both cases, crossing the border home fixes the problem and life is grand.
I have tried:
1.enabling data roaming
2.rebooting
3.battery pull
4.swapping sims
Is anyone else having similar roaming issues - is there a ROM that actually works while roaming from Canada while in the US?
I have seen problems on my old Galaxy S and my wife's similar to this as when trying different ROMS, but have never gone across the border with any of these ROMS installed.
What I've seen with different ROMS is:
1. sometimes cannot get phone to get on network unless I setup the APN settings first
2. sometimes cannot get phone or data to work without enabling roaming mode. The phone actually says it's roaming even when it's on the home network
Is there anything I'm missing in the forums on this issue?
Thanks for the help
hmm, maybe you've tried, but have you checked if the APN list is accurate ?
i believe there is an app to set the APN on the market ( can't remember the name though, never had the need for it.)
or try to google if you can find the APN setting of your network provider.
Seem like an APN problem to me as you explain it.
on the phone, you can access that with :
Settings >> Mobile networks >> Access Point Names and then the details of each APN can be checked/edited.
Hey guys, I have a T-Mobile branded Galaxy S5 (SM-G900T) that I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar. So then I'll turn off WiFi and I will have bars but the 4G LTE indicator will be gone and the only way to get it back is to reboot the phone. Any ideas as to what this could be? I have tried using both the T-Mobile & Metro PCS APN settings but the issue still happens no mattter which APN the phone is set to. Any help would be greatly appreciated. Thank you!
namicone said:
Hey guys, I have a T-Mobile branded Galaxy S5 (SM-G900T) that I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar. So then I'll turn off WiFi and I will have bars but the 4G LTE indicator will be gone and the only way to get it back is to reboot the phone. Any ideas as to what this could be? I have tried using both the T-Mobile & Metro PCS APN settings but the issue still happens no mattter which APN the phone is set to. Any help would be greatly appreciated. Thank you!
Click to expand...
Click to collapse
What rom are you using? that would be the first question. Little more info sir....thanks
AxAtAx said:
What rom are you using? that would be the first question. Little more info sir....thanks
Click to expand...
Click to collapse
No ROM, it's stock.
wifi calling enabled and set to only make calls on wifi?
This will happen when you have wifi calling enabled. That is why you see the cell signal bars go gray or grayed out. Turn off wifi calling and you will see you signal bars come back, as long as you have cell signal (service) at your house.
galaxyuser88 said:
This will happen when you have wifi calling enabled. That is why you see the cell signal bars go gray or grayed out. Turn off wifi calling and you will see you signal bars come back, as long as you have cell signal (service) at your house.
Click to expand...
Click to collapse
Having WiFi calling enabled won't affect your data and messaging at all unless there is a connection issue with the router.
namicone said:
I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar.
Click to expand...
Click to collapse
It sounds like a connectivity issue on the routers side if the APNs are correct. I would go back to Metro PCS APNs then check your signal strenth and link speed in the phones WiFi settings, then check to make sure WiFi calling does not display an error in the call settings. If all 3 are good then check your client list on router and make sure phones IP address and MAC id is there. If IP and MAC id are good run diag log on router and possibly change/test different wireless channels on your router.
I never have WiFi calling enabled so I don't see that as a cause, and I have tried both the MetroPCS and T-Mobile APN settings and it still happens. I'm still able to receive calls and send text messages but I can't receive MMS messages or access data. The only way to fix the issue is to turn on airplane mode for about 10 seconds and then turn it off and I get the 4GLTE signal indicator back along with full service. Its really weird because when this happens, I still have a signal indicator with 3-4 bars but the only the 4GLTE indicator disappears.
namicone said:
I never have WiFi calling enabled so I don't see that as a cause, and I have tried both the MetroPCS and T-Mobile APN settings and it still happens. I'm still able to receive calls and send text messages but I can't receive MMS messages or access data. The only way to fix the issue is to turn on airplane mode for about 10 seconds and then turn it off and I get the 4GLTE signal indicator back along with full service. Its really weird because when this happens, I still have a signal indicator with 3-4 bars but the only the 4GLTE indicator disappears.
Click to expand...
Click to collapse
I will get the same issue as stated above. When you have bars present with no data icon, its because your phone is latching on to another network when MetroPCS is not to be found. At my office, T-Mobile service is the pits, yet i get bars present. I usually open the dialer and type *#0011# and it will show what band your phone is picking up, from there you can tell if you are really on MetroPCS or someone elses network.
Hello. I have an SM-G925F which I bought from Telekom Macedonia and I am still using my number from there also but I am currently in the US and would like to use it on T-Mobile USA.
I know that the device supports all the same bands as the SM-G925T model.
The problem I am having is that when my phone is set to LTE/WCDMA/GSM in the Network Mode settings, I do not have any data connection at all, only when I make a call, I start to get a data connection but only 3G/H+. If I switch my setting to WCDMA/GSM, then I get a data connection at all times like normal but it still is only 3G/H+. I have tried two different APNs and different settings in the APN but I still cannot get a data connection at all times on the LTE/WCDMA/GSM setting and I cannot get LTE/4G at all.
After contacting T-Mobile, all they came up with is to try to have the same software reinstalled on my phone. Does anyone have any experience with this and can anyone help me?
Anyone?
Call Tmobile and have them input your phone's IMEI in their system. Ask for the APN settings as well. I am on the same boat and one call to ATT got me from H to 4G. Your phone will just show 4G, not LTE but you will get LTE speeds regardless.
I tried doing that too. I called T-Mobile a few times and they confirmed my IMEI number being on the account but still no luck. It's really weird..sometimes I get 3G/H+ on the "LTE/WCDMA/GSM (auto connect)" network mode setting on the phone but most of the time, I get NO DATA connection at all..only the signal bars.
Any Update
Did you finally figure it out? Is LTE working now?
I love this phone....there, I said it. But it's driving me crazy.
I bought it from a Chinese retailer, who shipped it with X821 firmware, but the box states that it's an X820. I doubt there is any difference in the hardware.
I would have left everything as it was, but I can't seem to make phone calls (don't have a data plan yet...yeah, I know....) with anything other than 2G, and that is about to go extinct. When I set it to WCDMA, it shows a UMTS connection, with no carrier designation, but the tower is the same one I connect to with 2G. The phone does sometimes show an AT&T 3G connection in the status bar, but I can't make calls, even though I have full signal. When I place the same SIM in my old HTC Inspire, the same monitoring app shows "UMTS - AT&T HSDPA+" and works just fine.
I'm at my wits end. I have rooted, installed TeamSpain recovery, replaced the firmware with the X829 and even tinkered with the frequency configurations through DFS Studio (which did a lot of complaining, and I'm still not sure if the changes stuck 100%). I also played with APN settings and tried the SIM in different slots, both alone, and with another SIM. And after all of that, still no progress in getting this phone to use a 3G or 4G connection to make calls. If I don't set it to "GSM only", no phone calls in or out. I'm essentially right under a tower, so signal shouldn't be an issue.
If anyone is using the same provider in the US, and is not having these kinds of issues, I'd really appreciate hearing what firmware you are using, and/or what you did to get things working.
I am using it on x820 with official stock 0.17s firmware, and did a dirty flash to cuoco92's 17s firmware. Everything works including HD voice calls, and full LTE.
xterminater07 said:
I am using it on x820 with official stock 0.17s firmware, and did a dirty flash to cuoco92's 17s firmware. Everything works including HD voice calls, and full LTE.
Click to expand...
Click to collapse
I tried this, as well as the Remix ROM. In fact, I think I've tried just about everything, without success. At one point, I had one of the apps indicating a 4G connection, but the phone diagnostics showed GSM (2G). Even the apps aren't all sure what to make of what's going on with the connections reported by this phone.
Currently on the cuoco92 v35 ROM. When WCDMA is enabled, I see simply a good UMTS connection , sans carrier name, in the "Network Cell Info Lite" app, and no ability to make calls. I also often (but not always) see the "AT&T 3G" sign. 4G or LTE never shows at all, even though the diagnostics show that the phone is communicating with an LTE transmitter, when preferred network is set to "unknown". It won't even let me set things like "LTE only".
Any chance you could set your phone to WCDMA and see what the "Network Cell Info Lite" app shows you? Anyone else with this phone on AT&T?
BTW, I am now using a data plan, which I thought might make a difference. It doesn't. EDGE data only for me . New SIM card is on the way, but my hopes aren't high.
Is it possible for a Chinese seller to have borked the phone so thoroughly with their x821 ROM (it's an x820 marked phone), that it keeps any subsequent radios from flashing properly? I don't know how/why it would work for some and not others.
Starting to really dislike this "phone"......it's more of tablet at this point.
Thanks.
I think APN is not set for AT&T
try this:
"Main steps
To use data services on our network with a non-AT&T device, you may need to program the data settings. The sections below provide the correct settings and steps for programming based on your device type and operating system.
.
Access the Settings menu.
Locate and select Wireless & Networks or More Networks.
Select Mobile Networks.
Select Access Point Names.
Locate and select the option to add a new APN. This is usually accessed by a + symbol on the screen or by tapping the menu button.
Program each field using the settings below.
Save the changes to return to the APNs menu and select the new APN.
Name ATT Phone
APN phone
Proxy Not set
Port Not set
Username Not set
Password Not set
Server Not set
MMSC
MMS proxy
MMS port
MCC 310
MNC 410
Authentication Type None
APN type default
APN protocol IPv4
Bearer Unspecified
Note: If you are unable to program your device following the steps above, refer to your user manual or contact the manufacturer for assistance."
Cadet_C said:
I think APN is not set for AT&T
Click to expand...
Click to collapse
Thanks, but I wish it were so simple. I have tried this, and other APN settings. None work to get this phone to be usable on anything other than 2G.
I just received and activated the replacement SIM. Still no improvement. While typing this, I have Network Cell Info Lite app running, and with the Set Preferred Network Type showing "Unknown" in the phone's diagnostic screen, It will switch randomly between "EDGE AT&T" (which works fine) and "UMTS -" (which is useless). Both have strong signals. For a split second before it switched to "UMTS-", the app showed "GPRS AT&T", but only for a split second before it kicks over to "UMTS-".
I wish someone using this "phone" on AT&T in the US, would run this app to compare notes. It may be that that the phone works fine on a full implementation of LTE (i.e. in locations where AT&T have already deprecated 2G) but not in other areas. Still, that doesn't seem to explain why this phone seems unable to register on the same 3G network, used easily by my other phone, with the very same APN settings and SIM.
You would have to call att and check if they turned our phone on to use lte. If your phone is not "registered" as an LTE capable phone it wouldn't be able to pick it up. This phone has all the bands needed for AT&T because I am using it now. All LTE work straight out the box, and i'm on the latest 19s cn rom
xterminater07 said:
You would have to call att and check if they turned our phone on to use lte. If your phone is not "registered" as an LTE capable phone it wouldn't be able to pick it up. This phone has all the bands needed for AT&T because I am using it now. All LTE work straight out the box, and i'm on the latest 19s cn rom
Click to expand...
Click to collapse
I'm a bit confused. Is this what you did to achieve proper function of this device? I.e. calling AT&T and getting them to do this for you? My conversation with their tech person didn't seem to bear fruit in this regard.
Also, which slot do you have the SIM card in? I've used the stock 17s and now on cuoco92 v35 ROM. There definitely seems to be a difference in how the network settings behave, based on the location of the SIM. At one point, after selecting BAND 6 (when it would let me), the phone showed a constant "AT&T 3G" connection, but it was useless. No calls and no data.