Files Credits: BadWolfYe
Reference thread: here
Note:-
-> Rooting may* void your phone warranty, and you won’t claim it back. (Honor India officials confirmed me that Rooting and bootloader unlocking doesnot voids the warranty).
-> Follow the steps correctly otherwise you may brick your device. I am not responsible for any damage of your phone.
-> Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
REQUIREMENTS(MUST)
1. Should have a custom recovery installed.
2. Should be rooted and SuperSu installed.
[Files needed to install custom recovery and flash Supersu in one package here.]
[Rooting Guide here ]
PROCEDURE
1. Boot in to twrp recovery(Vol.Up+Power) and Choose Install and flash the file here through twrp.
2. After installation Clear "dalvic cache" and reboot the system.
3. The reboot takes time(5-10minutes),so donot interfere the boot.
4. After bootup,install the apk from here.
;and Grant SuperSu access when prompted.
5. Now connect any pendrive via otg cable and see the magic.
Note: After installing the apk you can control the otg functionality using the Activate/Deactivate buttons in the App. Incase if the MTP or Charging doesnt work,press on Disconnect option in the app.
:fingers-crossed::laugh::fingers-crossed::laugh:HIT THANKS IF THIS HELPED YOU!:fingers-crossed::laugh::fingers-crossed::laugh:
nice guide
jkccl9 said:
nice guide
Click to expand...
Click to collapse
Check this and update here whether it worked in your device or not.
honor_ninja95 said:
Check this and update here whether it worked in your device or not.
Click to expand...
Click to collapse
Yep will do over the weekend
Can I try this on NEM-L21?
nucleuswizard said:
Can I try this on NEM-L21?
Click to expand...
Click to collapse
Yeah sure! It will work
good i a important developer
This should work in other Honor phones right?
Having conceived you duplicate already created subject???!!
http://forum.xda-developers.com/honor-5c/development/activation-support-otg-applications-t3471686
OOPS.. Without knowing the existence of this thread in ROM section I have done the same in Guides Section.
DRUGER said:
Having conceived you duplicate already created subject???!!
http://forum.xda-developers.com/honor-5c/development/activation-support-otg-applications-t3471686
Click to expand...
Click to collapse
No proper guides available... Thats why made this to make it simple.. Also given proper reference threads
DRUGER said:
Having conceived you duplicate already created subject???!!
http://forum.xda-developers.com/honor-5c/development/activation-support-otg-applications-t3471686
Click to expand...
Click to collapse
BadWolfYe said:
good i a important developer
Click to expand...
Click to collapse
Already given credits to you master !
honor_ninja95 said:
No proper guides available... Thats why made this to make it simple.. Also given proper reference threads
Click to expand...
Click to collapse
You did the right thing.
Can anyone give me confirmation regarding the working of these mods on other models?
please make a video and share that we will get clear idea regarding OTG enable in honor 5C
Hello, the apk doesn't ask SuperSu for root permission. I have a NEM-L51 rooted, and the app is telling me that root permission is necessary, but never asks for it.
An idea on how to fix that, plz ?
otg isn't working
my otg cable is not working. I flashes this zip file and installed otg app with supersu grant permission. thereafter its not working. It can't show any otg drive in my file manager. Anyone has any solution???
nucleuswizard said:
Can I try this on NEM-L21?
Click to expand...
Click to collapse
is it work well on NEM-L21 ?
Sent from my NEM-L21 using Tapatalk
Zhyrclew said:
Hello, the apk doesn't ask SuperSu for root permission. I have a NEM-L51 rooted, and the app is telling me that root permission is necessary, but never asks for it.
An idea on how to fix that, plz ?
Click to expand...
Click to collapse
In previous posts someone solved it for me. For some reason the latest supersu doesn't work. Root your phone with older version. I routed with Super su 2.65. Then flash the zip and reboot. It should work, did for me. Then install the latest super su 2.79 and it should remain working. Although a couple of times it forgot it has root after flashing the latest supersu. Just repeat steps again..
Hope this helps..and don't thank me,thank the person who posted the solution but you'll have to read a few threads....:silly:
Yes, i confirm that this manipulation does solve the problem. I did it following the advice i got on this thread. I must still thank you for spending time answering me.
I think i'll have to repeat the operation shorlty anyway, because i had to unroot my device to install a system update, and now i have to root it again ^.^
Related
Hello,
I have a rooted Iocean G7.
I wanted to install the framework module with the Xposed installer app. This was no success, I got a bootloop. After this I contacted Iocean, and I have flashed my phone with the computer. It works fine now, as it should.
Now my question is, how can I install the framework module without getting a bootloop or other problems?
Thank you,
Robert
Not compatible with your device maybe.
XperienceD said:
Not compatible with your device maybe.
Click to expand...
Click to collapse
That could be possible, I am going to ask to rovo98, if he can make framework compactible with my phone.
I hope he wants to do
On Tweakers they think that the Rom is not compactible, but I do not think so... You?
-RobertNL- said:
That could be possible, I am going to ask to rovo98, if he can make framework compactible with my phone.
I hope he wants to do
On Tweakers they think that the Rom is not compactible, but I do not think so... You?
Click to expand...
Click to collapse
Did you ask him already? Could you tell me the development process of that.
Thank you.
-RobertNL- said:
Hello,
I have a rooted Iocean G7.
I wanted to install the framework module with the Xposed installer app. This was no success, I got a bootloop. After this I contacted Iocean, and I have flashed my phone with the computer. It works fine now, as it should.
Now my question is, how can I install the framework module without getting a bootloop or other problems?
Thank you,
Robert
Click to expand...
Click to collapse
Hi Robert
I did the same thing as you...except that I have not been able to fix it. Can you please describe to me exactly how you reflashed your phone please?
Thanks in advance!
Sanxion said:
Hi Robert
I did the same thing as you...except that I have not been able to fix it. Can you please describe to me exactly how you reflashed your phone please?
Thanks in advance!
Click to expand...
Click to collapse
You guys know that Xposed puts a framework disabler zip on your internal storage? All you have to do is boot into a custom recovery and install it.
es0tericcha0s said:
You guys know that Xposed puts a framework disabler zip on your internal storage? All you have to do is boot into a custom recovery and install it.
Click to expand...
Click to collapse
Unfortunately, I don't have a custom recovery installed. My phone is literally out of the box.
Sanxion said:
Unfortunately, I don't have a custom recovery installed. My phone is literally out of the box.
Click to expand...
Click to collapse
https://mega.co.nz/#!pppliCCK!09s525-EUAU2Uy7yqwMvFfm0RwyboUCFoY4yvq7pa80 - Recovery from here: http://www.needrom.com/mobile/iocean-g7-miui/#comments
https://www.youtube.com/watch?v=IXYYbDPfk48 - Install Guide
I do not have this phone, so have no way to test. You attempt at your own risk.
es0tericcha0s said:
https://mega.co.nz/#!pppliCCK!09s525-EUAU2Uy7yqwMvFfm0RwyboUCFoY4yvq7pa80 - Recovery from here: http://www.needrom.com/mobile/iocean-g7-miui/#comments
https://www.youtube.com/watch?v=IXYYbDPfk48 - Install Guide
I do not have this phone, so have no way to test. You attempt at your own risk.
Click to expand...
Click to collapse
Thank-you...will this work even though I did not enable usb debugging on my phone?
Sanxion said:
Thank-you...will this work even though I did not enable usb debugging on my phone?
Click to expand...
Click to collapse
What root method did you do that didn't require USB Debugging to be enabled?? But yea, I dunno about that. You're going to have to find out though. You'll need the SP Flash Tool to work, whether it's to install the custom recovery, or to install the entire stock firmware.
es0tericcha0s said:
What root method did you do that didn't require USB Debugging to be enabled?? But yea, I dunno about that. You're going to have to find out though. You'll need the SP Flash Tool to work, whether it's to install the custom recovery, or to install the entire stock rom.
Click to expand...
Click to collapse
There is a 'Super User' setting in Settings which I enabled.
I tried installing PdaNet but that does require USB debugging to complete the installation.
Isn't there a standard recovery mode on these phones that I can use (combination key press) to install a rom copied onto the SD card?
Sanxion said:
There is a 'Super User' setting in Settings which I enabled.
I tried installing PdaNet but that does require USB debugging to complete the installation.
Isn't there a standard recovery mode on these phones that I can use (combination key press) to install a rom copied onto the SD card?
Click to expand...
Click to collapse
That's pretty handy. But no, the stock recovery does not support that. You might be able to get out of it just from doing a factory reset in the stock recovery, but it's hard to say since Xposed makes changes to /system as well and the factory data reset does not affect the /system partition, just /data
es0tericcha0s said:
That's pretty handy. But no, the stock recovery does not support that. You might be able to get out of it just from doing a factory reset in the stock recovery, but it's hard to say since Xposed makes changes to /system as well and the factory data reset does not affect the /system partition, just /data
Click to expand...
Click to collapse
Ok...how do I access the "stock recovery"?
Sanxion said:
Ok...how do I access the "stock recovery"?
Click to expand...
Click to collapse
It's in the comments to the needrom thread I linked to.
es0tericcha0s said:
It's in the comments to the needrom thread I linked to.
Click to expand...
Click to collapse
Thanks...I have fixed it...strangely the PdaNet drivers worked when I turned my phone on...from there I was able to install MTK tools, then cwm recovery, wiped dalvik etc and did a reset...all fine now.
-RobertNL- said:
Hello,
I have a rooted Iocean G7.
I wanted to install the framework module with the Xposed installer app. This was no success, I got a bootloop. After this I contacted Iocean, and I have flashed my phone with the computer. It works fine now, as it should.
Now my question is, how can I install the framework module without getting a bootloop or other problems?
Thank you,
Robert
Click to expand...
Click to collapse
hi good day how to root iocean g7
Root method for 5.1.1 for the SM-G360T1 THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
Kernel set to permissive
Otherwise stock
So here's the deal. Stupid simple.
Before you do anything, go to settings/about device and tap Build Number til you unlock dev options. Go into dev options and make sure OEM Unlock is checked. Now you can continue.
1. Put Phone in Download mode
2. Open Odin
3. Connect Phone
4. Put Kernel in AP Slot
5.Flash it
6. Reboot and profit
Notes:
Download SuperSu from the Playstore. Its not included.
If at first it doesnt boot, pull the battery and reboot.
Video Tutorial of Installation Thanks to @TheDerekHarper
https://www.youtube.com/watch?v=RWm3auBSsU4
Download
Do NOT mirror this link. Period.
[FONT="Lucida Sans]links removed. It's outdated by years lol[/URL][/FONT]
[B][FONT="Lucida Sans Unicode"]Special thanks to:
@g.lewarne for the obvious reason of being awesome and his root method for the s6.
@bogarty for testing multiple tests
@Chainfire for SuperSU
[/B][/FONT]
Heres the kernel source that is set to permissive and will allow root if anyone wants to fork it and build a kernel:
Kernel Source Set to Permissive for the G360T1
Thank you for all your work!!!
Thanks For This Post And The Root For You And The Other Dude
ShinySide said:
Also mine
Click to expand...
Click to collapse
Glad It Works Just Tried It Out Hope We Get Some Roms And Other Stuff Like That
ShinySide said:
Also mine
Click to expand...
Click to collapse
2 in one day crazy!
please help m i could not root my samsung with this method
Deandre7452 said:
Glad It Works Just Tried It Out Hope We Get Some Roms And Other Stuff Like That
Click to expand...
Click to collapse
i could ot root mine,,root failed please help me:crying:
osk4rin said:
i could ot root mine,,root failed please help me:crying:
Click to expand...
Click to collapse
Hmmm...make sure that you have:
1) The "SM-G360T1".
2) The latest firmware: "G360T1UVU1AOFA".
3) Followed all the steps in the OP.
Sent from my SM-G360T1 using Tapatalk
osk4rin said:
i could ot root mine,,root failed please help me:crying:
Click to expand...
Click to collapse
Can't help if you're not actually going to explain how "root failed"
Root process fail (odin)
ShinySide said:
Can't help if you're not actually going to explain how "root failed"
Click to expand...
Click to collapse
Hi there!
I tried to root my Samsung g360t1 followed all the steps.
I have the latest firmware.,I attached the file on Odin and at the end at
The process fail.
Can I have your help please!!thanks
osk4rin said:
Hi there!
I tried to root my Samsung g360t1 followed all the steps.
I have the latest firmware.,I attached the file on Odin and at the end at
The process fail.
Can I have your help please!!thanks
Click to expand...
Click to collapse
Change usb ports, try different cable,make sure drivers are installed, disable/Uninstall kies if you have it installed on pc.
The flashing part went fine. then the reboot and I tried to install SuperSU. It wants to update the binary and has tried several times with no luck. then it reboots and now wont come back on..... I got this phone yesterday,
Longturd said:
The flashing part went fine. then the reboot and I tried to install SuperSU. It wants to update the binary and has tried several times with no luck. then it reboots and now wont come back on..... I got this phone yesterday,
Click to expand...
Click to collapse
Just dont update it. Su included is the absolute latest already. Its actually the 2.49 beta
ShinySide said:
Just dont update it. Su included is the absolute latest already. Its actually the 2.49 beta
Click to expand...
Click to collapse
root checker says its not rooted..... something went wrong but I have flashed a bunch of phones and Im pretty sure I did right.
.I have a notification that says "security notice" and some thing about unauthorized action. reboot to restore
Longturd said:
root checker says its not rooted..... something went wrong but I have flashed a bunch of phones and Im pretty sure I did right.
.I have a notification that says "security notice" and some thing about unauthorized action. reboot to restore
Click to expand...
Click to collapse
You are a G360T1 and not any other variant correct?
ShinySide said:
You are a G360T1 and not any other variant correct?
Click to expand...
Click to collapse
yes.... would not make that mistake
the phone is working but there is no root
Longturd said:
yes.... would not make that mistake
the phone is working but there is no root
Click to expand...
Click to collapse
Alright Ill look into it when I get a minute. Out of the 50 downloads over night no one else has mentioned.
ShinySide said:
Alright Ill look into it when I get a minute. Out of the 50 downloads over night no one else has mentioned.
Click to expand...
Click to collapse
does oem unlocking matter? in developer options
the phone is cool now. I killed the warranty and dont have root but there is hope
I'm getting an error message in download mode...
"Custom Binary(boot) Blocked by FAP Lock"
Sent from my SM-G360T1 using XDA Free mobile app
givo7192 said:
I'm getting an error message in download mode...
"Custom Binary(boot) Blocked by FAP Lock"
Sent from my SM-G360T1 using XDA Free mobile app
Click to expand...
Click to collapse
fix: open settings do a search for reavtivation lock and sign into your samsung account and disable it
error on dowload mode
ShinySide said:
fix: open settings do a search for reavtivation lock and sign into your samsung account and disable it
Click to expand...
Click to collapse
i have the same message!! on download mode
custom Binary(boot) Blocked by FAP lock
any help please master?
So I picked this up from sprint for free an well can't find anything for it or on it or who makes it....trying to root it..as of right now if I can't going to take back as it's rebooting it self a lot only had it about a full day an has rebooted or not resoned about a dozen times already...any help would be great..if it's just crap is the lg g pad f7.0 any better?
donbudafuko said:
So I picked this up from sprint for free an well can't find anything for it or on it or who makes it....trying to root it..as of right now if I can't going to take back as it's rebooting it self a lot only had it about a full day an has rebooted or not resoned about a dozen times already...any help would be great..if it's just crap is the lg g pad f7.0 any better?
Click to expand...
Click to collapse
Quanta AQT80, also listed under Sprint as manufacturer. King Root apk worked for me on 5.1.1. Garbage tablet imo. Maybe some bloatware removal will speed it up. Good luck
ihadacatonce said:
Quanta AQT80, also listed under Sprint as manufacturer. King Root apk worked for me on 5.1.1. Garbage tablet imo. Maybe some bloatware removal will speed it up. Good luck
Click to expand...
Click to collapse
Can u post link pls...an u r saying u have the sprint slate 8 rooted right cus I would love to just have root ATM with this damn thing...
rooted aqt80
Hope I'm not to late to help. So i got root with kingroot, (not kingoroot) fast and efficient to be sure but i have real trust issues with..well anybody really, Chinese hackers with backdoor accesses for sure. That said, and not having anything valuable on this brick-to-be the performance gains were pretty substantial. Like day and night. Might be because i only use it on Wi-Fi at home so i was able to can all the telephone crap, oh but i do love pushing uninstall on bloat. Almost makes the frustration of no one knowing how to root the thing worth it. Anyway, here's the kingroot link. Be warned, It will intigrate, and it was still there after a hard reset (i sometimes love canning boat a bit too much) which creeped me out enough to uninstall it just to be sure, and it did.
Xda won't let me post the link. Is actually on this site somewhere or google. just don't do kingoroot by accident. Been there done that
donbudafuko said:
Can u post link pls...an u r saying u have the sprint slate 8 rooted right cus I would love to just have root ATM with this damn thing...
Click to expand...
Click to collapse
Use "Kings Root Root and Root Checker" app from Play Store. Working like a charm.
I have proper (SuperSU) and Xposed installed correctly...
je2854 said:
I have proper (SuperSU) and Xposed installed correctly...
Click to expand...
Click to collapse
What exspoed did u use? Also what terms have u done to build.prop...anything will help with this tablet.. The touch is so bad on it
You MUST, in this order, follow my instructions or it won't work correctly.
Install Kingroot (not kingoroot)
-root and reboot
Install Supersu me from the market
- follow in-app instructions
Install FlashFire version .52
-No more, no less or it will not work
Install Xposed 3.0 Alpha 4
-find it on XDA
FlashFire Xposed version SDK 22 version 80, *arm*
-hit add button, flash zip or OTA, select Xposed.zip, untick mount /system read/write option
FLASH
-reboot- profit!!
I haven't touched build.prop (yet)
ihadacatonce said:
Quanta AQT80, also listed under Sprint as manufacturer. King Root apk worked for me on 5.1.1. Garbage tablet imo. Maybe some bloatware removal will speed it up. Good luck
Click to expand...
Click to collapse
When you get proper root on it and freeze some apps it DOES respond faster.
Any recovery
Sent from my AQT80 using Tapatalk
turkbot said:
Any recovery
Sent from my AQT80 using Tapatalk
Click to expand...
Click to collapse
none at the moment! ):
je2854 said:
You MUST, in this order, follow my instructions or it won't work correctly.
Install Kingroot (not kingoroot)
-root and reboot
Install Supersu me from the market
- follow in-app instructions
Install FlashFire version .52
-No more, no less or it will not work
Install Xposed 3.0 Alpha 4
-find it on XDA
FlashFire Xposed version SDK 22 version 80, *arm*
-hit add button, flash zip or OTA, select Xposed.zip, untick mount /system read/write option
FLASH
-reboot- profit!!
I haven't touched build.prop (yet)
Click to expand...
Click to collapse
Hi,
I too got new tab for free from Sprint and am not techie or have prior experience on rooting. Steps u provided sounds easy but to avoid getting unknown issues, can u pls let me know if I have to follow above steps on the tab or should I do it from laptop? If u can provide some step by step video tutorial or PM me, I really appreciate Your help.
Thanks,
Prince
princedare said:
Hi,
I too got new tab for free from Sprint and am not techie or have prior experience on rooting. Steps u provided sounds easy but to avoid getting unknown issues, can u pls let me know if I have to follow above steps on the tab or should I do it from laptop? If u can provide some step by step video tutorial or PM me, I really appreciate Your help.
Thanks,
Prince
Click to expand...
Click to collapse
You do this all from the tablet.
I couldn't really video this as it's already rooted and wouldn't know where the OE firmware is.
It isha hard to mess it up as it has a locked boot loader.
OK thanks. Will try steps and let u know if it works. Am afraid what if device gets bricked. I can't return device either. Correct me if am wrong.
Thanks,
Prince
je2854 said:
You MUST, in this order, follow my instructions or it won't work correctly.
Install Kingroot (not kingoroot)
-root and reboot
Install Supersu me from the market
- follow in-app instructions
Install FlashFire version .52
-No more, no less or it will not work
Install Xposed 3.0 Alpha 4
-find it on XDA
FlashFire Xposed version SDK 22 version 80, *arm*
-hit add button, flash zip or OTA, select Xposed.zip, untick mount /system read/write option
FLASH
-reboot- profit!!
I haven't touched build.prop (yet)
Click to expand...
Click to collapse
Hey JE,
Am still confused with these apps and websites.. I tried to search kingroot in play store but couldn't find and searched in google. Then for SuperSU, tried to google and it was in play store.. can You atleast guide or put a note on across each item on where to find? Something like:
Code:
Install Kingroot (not kingoroot) - URL/Google
-root and reboot
Install Supersu me from the market - Play Store
- follow in-app instructions
Install FlashFire version .52 - XDA
-No more, no less or it will not work etc.,
Thanks,
Prince
princedare said:
Hey JE,
Am still confused with these apps and websites.. I tried to search kingroot in play store but couldn't find and searched in google. Then for SuperSU, tried to google and it was in play store.. can You atleast guide or put a note on across each item on where to find? Something like:
Code:
Install Kingroot (not kingoroot) - URL/Google
-root and reboot
Install Supersu me from the market - Play Store
- follow in-app instructions
Install FlashFire version .52 - XDA
-No more, no less or it will not work etc.,
Thanks,
Prince
Click to expand...
Click to collapse
I will tomorrow sometime at work.
je2854 said:
I will tomorrow sometime at work.
Click to expand...
Click to collapse
Install Kingroot (not kingoroot) Click Here
-root and reboot
Install Supersu me from the market Click Here
- follow in-app instructions
Install FlashFire version .52 Click Here
-No more, no less or it will not work
Install Xposed 3.0 Alpha 4 Click Here
-find it on XDA
FlashFire Xposed version SDK 22 version 80, *arm* Click Here
-hit add button, flash zip or OTA, select Xposed.zip, untick mount /system read/write option
FLASH
Google is always your friend but since I found a proper root, found all the links for you, and gave the links.
Please hit the thanks button!
je2854 said:
Install Kingroot (not kingoroot) Click Here
-root and reboot
Install Supersu me from the market Click Here
- follow in-app instructions
Install FlashFire version .52 Click Here
-No more, no less or it will not work
Install Xposed 3.0 Alpha 4 Click Here
-find it on XDA
FlashFire Xposed version SDK 22 version 80, *arm* Click Here
-hit add button, flash zip or OTA, select Xposed.zip, untick mount /system read/write option
FLASH
Google is always your friend but since I found a proper root, found all the links for you, and gave the links.
Please hit the thanks button!
Click to expand...
Click to collapse
Thank You Sir. You are awesome. I want to thank you and I couldn't find Thanks button instead clicked thumbs up icon (as like button in Facebook). Pls let me know if it helps.
Thanks again and am starting to root my tab.
Thanks,
Prince
princedare said:
Thank You Sir. You are awesome. I want to thank you and I couldn't find Thanks button instead clicked thumbs up icon (as like button in Facebook). Pls let me know if it helps.
Thanks again and am starting to root my tab.
Thanks,
Prince
Click to expand...
Click to collapse
Hi JE,
Hope I get some help here. I followed steps You provided in order.
Installation of kingroot worked fine.
Having trouble with super su me. After I click blue icon it's stucked saying Processing from more than 7 hours. Pls let me know if I can get rid of this.
Thanks,
Prince
princedare said:
Hi JE,
Hope I get some help here. I followed steps You provided in order.
Installation of kingroot worked fine.
Having trouble with super su me. After I click blue icon it's stucked saying Processing from more than 7 hours. Pls let me know if I can get rid of this.
Thanks,
Prince
Click to expand...
Click to collapse
Super SU me is a paid for app...
I cannot help with 3rd party locations.
I've ran through the process multiple times and it works...
Do you have USB debugging on?
Below you will find my procedure to root the SM-J727P Galaxy J7 Perx / MSM8953
This procedure has only been tested on J727PVPU1AQB9 firmware. It may work for future releases or it may not.
If an updated firmware becomes available my advice is to update with FLASHFIRE to maintain root.
This took some doing and was a tough nut to crack. I don't own this device and much thanks goes to those that stuck with it in the testing phase, without whom it would not have even been possible. Credits below.
To see how we got here and before asking any questions click this link: https://forum.xda-developers.com/galaxy-j7/help/root-sm-j727p-galaxy-j7-perx-galaxy-j7-t3598117
DISCLAIMER: YOU FLASH THESE AT YOUR OWN RISK. THE KNOX COUNTER WILL BE TRIPPED AND WILL POTENTIALLY VOID YOUR WARANTY. HAVING THE STOCK FIRMWARE TO HAND IS ALSO ADVISED
NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Instructions:
◘ 1. Download the files below:
J727P-SuperSU-v2.79-SR3_rooted_boot_AQB9
ODIN 3.12
SAMSUNG_USB_Driver_for_Mobile_Phones
◘ 2. Install the USB driver and ODIN to Windows.
◘ 3. Boot your device to RECOVERY mode then select FACTORY RESET. THIS WILL WIPE YOUR DEVICE AND YOU WILL LOSE ALL DATA. (This procedure is required to remove encryption or your device won't boot)
◘ 4. From RECOVERY, IMMEDIATELY Boot your device to DOWNLOAD mode then connect your USB cable. (DO NOT LET YOUR DEVICE REBOOT NORMALLY OR YOUR DEVICE WILL RE-ENCRYPT)
◘ 5. Run ODIN and place the J727P_SuperSU-v2.79-SR3_rooted_boot_AQB9.tar file as is in the AP slot. Don't change any options and hit START.
◘ 6. Wait for the device to flash and reboot.
◘ 7. Install the SuperSU apk from Play store and you should be rooted.
◘ 8. Have fun!
Credits: ME, @Borams @Project89Odin @Chainfire and special thanks to @RS.85243
PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.
IF YOU APPRECIATE WHAT I DO AND WISH TO DONATE ME A COFFEE/BEER THEN CLICK HERE OR HIT THE THANKS BUTTON IF I HELPED YOU
I got the encryption error on reboot. I then did the reset it required and rebooted. I installed supersu just to see what it would say. It says root not properly installed in root checker, so I guess that means its there but I guess its a binary issue? Is there something that I didnt do correctly or a step I missed?
scbcskin said:
I got the encryption error on reboot. I then did the reset it required and rebooted. I installed supersu just to see what it would say. It says root not properly installed in root checker, so I guess that means its there but I guess its a binary issue? Is there something that I didnt do correctly or a step I missed?
Click to expand...
Click to collapse
Whoops glad you pointed that out, forgot to include that step!
I factory reset, booted directly to download mode, flashed tar, phone rebooted. I installed Supersu but still not rooted.
scbcskin said:
I factory reset, booted directly to download mode, flashed tar, phone rebooted. I installed Supersu but still not rooted.
Click to expand...
Click to collapse
When you open the SuperSU app does it complain about no binary installed?
ashyx said:
When you open the SuperSU app does it complain about no binary installed?
Click to expand...
Click to collapse
It sure does!!
scbcskin said:
It sure does!!
Click to expand...
Click to collapse
Strange, it works perfectly on Marshmallow. Looks like we're going back to the old method of manually pushing su.img to data!
Will update shortly.
Have you tried rebooting again to see if works after that?
Just did a reboot and same deal.
scbcskin said:
Just did a reboot and same deal.
Click to expand...
Click to collapse
I think I've just found the issue. Try this version instead, no need to format, just install with ODIN.
https://www.androidfilehost.com/?fid=961840155545567256
.
If you grant root permission before opening supersu apk but after downloading it, it does not ask to update binary with first op build
Project89Odin said:
If you grant root permission before opening supersu apk but after downloading it, it does not ask to update binary with first op build
Click to expand...
Click to collapse
Say again. Can you explain in more details, not sure I understand?
After process in op, after downloading supersu do not open it, download something that requires root and grant it. It will grant without ever opening supersu. I granted flashfire and flashed sr3 just to make sure. After reboot i opened the supersu app and it asks for no update. Although disabling knox did not work for me.
Project89Odin said:
After process in op, after downloading supersu do not open it, download something that requires root and grant it. It will grant without ever opening supersu. I granted flashfire and flashed sr3 just to make sure. After reboot i opened the supersu app and it asks for no update. Although disabling knox did not work for me.
Click to expand...
Click to collapse
OK I see. Can you do me a favour and test the updated version?
First delete su.img from /data or just unroot from SuperSU settings then reboot to download mode and install the new version. Your device should auto re-root.
https://www.androidfilehost.com/?fid=961840155545567256
ashyx said:
I think I've just found the issue. Try this version instead, no need to format, just install with ODIN.
https://www.androidfilehost.com/?fid=961840155545567256
.
Click to expand...
Click to collapse
Root has been achieved my friend. At first a flashed it and when it booted I got the encryption error. I just pulled the battery and then tried to boot into recovery. Instead of going in recovery it booted like normal. I installed Supersu and it got stuck attempting to disable Knox. Well after about 2 minutes or so of watching that I just went to root checker and there it was. I think I can speak for everyone when I say job well done!!!:good:
---------- Post added at 01:09 AM ---------- Previous post was at 01:00 AM ----------
Quick question, must you have custom recovery in order to install Xposed or is it just a suggestion?
After deleting su in /data andfull unroot, flashed newer build and supersu reports no binary, not even one to update, no root
scbcskin said:
Root has been achieved my friend. At first a flashed it and when it booted I got the encryption error. I just pulled the battery and then tried to boot into recovery. Instead of going in recovery it booted like normal. I installed Supersu and it got stuck attempting to disable Knox. Well after about 2 minutes or so of watching that I just went to root checker and there it was. I think I can speak for everyone when I say job well done!!!:good:
---------- Post added at 01:09 AM ---------- Previous post was at 01:00 AM ----------
Quick question, must you have custom recovery in order to install Xposed or is it just a suggestion?
Click to expand...
Click to collapse
Thanks for confirming. OP updated.
You can use Flashfire to install Xposed.
ashyx thank you for your efforts. Thanks to everyone else that helped as well. Guess what I just ordered. Can't wait to get my new phone and root, install viper4android. Both are a must for me and I never own a phone I can't have both on.
scbcskin said:
Just did a reboot and same deal.
Click to expand...
Click to collapse
When the reboot is repeated,
please flash the original firmware to odin
and try again from the beginning.
from CIAO7
after unrooting, repeating format is required to reroot. Works flawless. Thankyou again. Looking forward to a fully functional twrp now!!
Project89Odin said:
Thankyou again. Looking forward to a fully functional twrp now!!
Click to expand...
Click to collapse
It's next on my hit list. Just need to figure out why the source built kernel doesn't boot.
Now that root is achieved there's more chance of finding out what's going on, so I'll be calling on you guys again at some point for logs.
This is kind of storytime... I got the application by redeeming a code that was posted as a gift on their fanpage at Facebook. I had to sent them via Telegram the Google play ID order, something that I couldn't find. I explained that and they understood me and said that if I could send the code that I got the application, they are gonna send be the actual files. So I received the files and I'm ready to begin! I don't have much spare time so I'm gonna do this whenever I have the time to do so. Wish me luck! I'm gonna keep you guys updated and let you know what happened.
Andriano24 said:
This is kind of storytime... I got the application by redeeming a code that was posted as a gift on their fanpage at Facebook. I had to sent them via Telegram the Google play ID order, something that I couldn't find. I explained that and they understood me and said that if I could send the code that I got the application, they are gonna send be the actual files. So I received the files and I'm ready to begin! I don't have much spare time so I'm gonna do this whenever I have the time to do so. Wish me luck! I'm gonna keep you guys updated and let you know what happened.
Click to expand...
Click to collapse
knox to 0x0?
DaniPS2002 said:
knox to 0x0?
Click to expand...
Click to collapse
Yeah that's what the app suppose to do
Andriano24 said:
Yeah that's what the app suppose to do
Click to expand...
Click to collapse
the app name is knox reset 0x0 (0)?
DaniPS2002 said:
the app name is knox reset 0x0 (0)?
Click to expand...
Click to collapse
Yes
Okay, let we know!
MarcusBS said:
Okay, let we know!
Click to expand...
Click to collapse
I've stuck in a step. Sadly I cannot complete now the instructions given because I can't turn the systemless root into system mode
Andriano24 said:
I've stuck in a step. Sadly I cannot complete now the instructions given because I can't turn the systemless root into system mode
Click to expand...
Click to collapse
What do you mean you can't turn systemless root into system mode?
ashyx said:
What do you mean you can't turn systemless root into system mode?
Click to expand...
Click to collapse
https://android.stackexchange.com/q...om-systemless-root-to-system-traditional-root
Check that out
Andriano24 said:
https://android.stackexchange.com/q...om-systemless-root-to-system-traditional-root
Check that out
Click to expand...
Click to collapse
I actually meant what is preventing you from installing supersu in system mode, it's simple enough? Also which device is this?
ashyx said:
I actually meant what is preventing you from installing supersu in system mode, it's simple enough? Also which device is this?
Click to expand...
Click to collapse
I flash the super su, then try to full unroot, my phone reboots and I press the combination of keys to go to twrp recovery, go to terminal thingy, type the code and the last step I do is flashing again the supersu. But then I boot into system I stuck on the logo screen
Andriano24 said:
I flash the super su, then try to full unroot, my phone reboots and I press the combination of keys to go to twrp recovery, go to terminal thingy, type the code and the last step I do is flashing again the supersu. But then I boot into system I stuck on the logo screen
Click to expand...
Click to collapse
You've lost me Tbh. I don't understand what steps you are performing and why.
Type what code?
ashyx said:
You've lost me Tbh. I don't understand what steps you are performing and why.
Type what code?
Click to expand...
Click to collapse
Didn't you see the post I send you? The "code" is
Echo SYSTEMLESS=false > /data/.supersu
Andriano24 said:
Didn't you see the post I send you? The "code" is
Echo SYSTEMLESS=false > /data/.supersu
Click to expand...
Click to collapse
OK first things first. You have to reinstall SuperSu for that code to work AND a patched boot.img.
Second for what reason do you need SuperSU to be in system mode?
[Deleted by me]
ashyx said:
OK first things first. You have to reinstall SuperSu for that code to work AND a patched boot.img.
Second for what reason do you need SuperSU to be in system mode?
Click to expand...
Click to collapse
Thank you for your time. But can you wrote the full steps below? Because I'm tired of getting into a bootloop only because I am not able to understand the instructions! You can do it only of you want to!
Secondary, the Knox Reset app has a plugin to make the success rate bigger of turning the 0x1 back to 0x0 (as far as I know) and the plugin needs system mode root :/
Lol right now I'm not rooted because I'm tired of the bootloops while rying to system mode root
Andriano24 said:
Lol right now I'm not rooted because I'm tired of the bootloops while rying to system mode root
Click to expand...
Click to collapse
Easiest way is to reroot systemless. After rooting back up the boot partition with TWRP.
Unroot then install SuperSU in system mode.
Finally restore the boot.img from the backup.
Reboot.
Note also be aware that system mode root is hit and miss on devices running nougat.
You still haven't stated which device?
ashyx said:
Easiest way is to reroot systemless. After rooting back up the boot partition with TWRP.
Unroot then install SuperSU in system mode.
Finally restore the boot.img from the backup.
Reboot.
Note also be aware that system mode root is hit and miss on devices running nougat.
You still haven't stated which device?
Click to expand...
Click to collapse
Oh sorry I forgot about that! I have the Samsung galaxy A5 2017 running...... nougat.....
Andriano24 said:
Oh sorry I forgot about that! I have the Samsung galaxy A5 2017 running...... nougat.....
Click to expand...
Click to collapse
Then you have a 50/50 chance of root working in system mode.
Also tbh I think this knox app is fake or it just fakes knox to 0x0 the same way Magisk can.