CM14.1 is here for the LS990, aka the Sprint LG G3.
This is unofficial until one framework change gets merged in for fixing LteOnCdma support. Once that merge happens, we'll get nighties.
This should have fully working modem, nfc and all the things you've come to enjoy. World phone mode is enabled, but I do not have an activated GSM sim to fully test the GSM side.
Instructions
This has only be validated on ZVC or newer firmware.
Download cm-14.1, and gapps. Put them on your sdcard, reboot to recovery. Flash, and enjoy!
The latest will be available at:
http://downloads.codefi.re/shelnutt2/g3/ls990/cm14_1/
Gapps:
OpenGapps:
http://opengapps.org/?api=7.1&variant=nano
Click to expand...
Click to collapse
Known Issue
None!
Click to expand...
Click to collapse
Change Log
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the following people:
invisiblek
Kasual52e
rashed
Click to expand...
Click to collapse
Source
http://github.com/CyanogenMod
Click to expand...
Click to collapse
Is the speakerphone Echo fixed?
There is a setting in stock phone "call settings" that has to be changed in order to keep it from happening.
In the stock "call settings" you have to turn off noise suppression and turn on voice enhancement:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think all of the source built Roms are built with this setting set to it's default settings which causes the echo even in the stock Roms until it's changed to the above. (The pic is from MM but it's prevalent in the Nougat Roms as well).
People do a lot to try to fix the problem, change: mixer_paths.xml to no avail. turning the volume down, changing the Mic settings doesn't take the problem away.
I would love to see this fixed. I can't use any of the source built Roms because of it. (I can't stand to put the phone to my head, I have to have speakerphone).
Anyway hope this gives the right people the insight to fix the problem.
Thanks for taking the time to bring us these awesome builds.
? Sent from DjRobBlaze's VS985 ? Rockin' ? Fulmics 6.6 ? using Tapatalk. ? ®
Shelnutt2 said:
CM14.1 is here for the LS990, aka the Sprint LG G3.
This is unofficial until one framework change gets merged in for fixing LteOnCdma support. Once that merge happens, we'll get nighties.
This should have fully working modem, nfc and all the things you've come to enjoy. World phone mode is enabled, but I do not have an activated GSM sim to fully test the GSM side.
Click to expand...
Click to collapse
That framework change you mentioned to fix LteOnCdma support, is that in this release and you are waiting for it to be merged with CM official?
Just wanted to thank the OP, this rom is working perfectly (dec 15 build). It's actually more stable than the cm14.1 nightlies for the d851 G3 (T-Mobile). I've had no sim card or data issues of any kind. Miracast works great as well.
bavarianblessed said:
That framework change you mentioned to fix LteOnCdma support, is that in this release and you are waiting for it to be merged with CM official?
Click to expand...
Click to collapse
It is included in these unofficial builds. It is awaiting merge upstream, https://review.cyanogenmod.org/#/c/176865/
in light of the news today, I'm guessing the ls990 is never getting merged into the nightlies, and we might be looking at a whole new rom in the future (lineage).
its hard to believe really... cyanogenmod seemed like it was poised to take over... its been my favorite rom for about 3 years now, and was really starting to get good in this 14.1 build (miracast finally works!)
i guess just thanks for building these, not sure where we all go from here...
Whatever happens there will continue to be unofficial builds of either cm or lineage until we are able to get the necessary changes merged to make stable official builds
Engineers running businesses get owned by business people running businesses. From 10k km, it seems the cyanogen Corp got edged out by 'partners' with less then admirable ethics and motives. The code is still ours, thanks to GPL. Our community will continue to build and rebuild. Kondik has learned to play hardball the hard way, and will hopefully dust himself off and come back even stronger. The hope for a mainstream android fork continues... and it's likely to keep on that way just like 2017 is going to finally be the year of desktop Linux. In the mean time, thank and donate to our developers, their blood oils the machinery of free software.
Rooted ZVC Firmware?
Where can I find rooted ZVC Firmware? I tried this with the rooted ZVB firmware at https://forum.xda-developers.com/sp...990-zvb-root-method-zvb-rooted-stock-t3211878, but after rebooting, it doesn't look like I have root privileges.
rogerdc said:
Where can I find rooted ZVC Firmware? I tried this with the rooted ZVB firmware at https://forum.xda-developers.com/sp...90-zvb-root-method-zvb-rooted-stock-t3211878, but after rebooting, it doesn't look like I have root privileges.
Click to expand...
Click to collapse
Rooted ZVC:
http://forum.xda-developers.com/sprint-lg-g3/development/barecee-zvc-t3257826
Straight stock partitions http://downloads.codefi.re/autoprime/LG/LG_G3/LS990/stock_partitions/ZVC
There's a nice little modem/rpm/tz flasher zip in the ZVB folder there that can be commandeered to flash the relevant ZVC partitions with a little zip hacking.
just flashed this after failing at the Resurection and Cypher N roms. I couldnt get data, cell, text or any networks to work.
This worked fine out of the box. Awesome! Nice and smooth. No force closes. Bluetooth appears to be nice and stable at least on my headphones which are a foot away from me. Havent tried my car yet.
On a side note, the whole reason I was trying to upgrade to something nougat based was to get the google assistant working. There appears to be a workaround if you are not a pixel phone listed here. https://forum.xda-developers.com/android/software/guide-how-to-enable-google-assistant-t3477879
Then I started reading and it doesnt appear the g3 is on its list of supported phones for this. Has anyone tried it yet? Does it work, and if so, what technique did you use?
CMILD561 said:
On a side note, the whole reason I was trying to upgrade to something nougat based was to get the google assistant working. There appears to be a workaround if you are not a pixel phone listed here. https://forum.xda-developers.com/android/software/guide-how-to-enable-google-assistant-t3477879
Then I started reading and it doesnt appear the g3 is on its list of supported phones for this. Has anyone tried it yet? Does it work, and if so, what technique did you use?
Click to expand...
Click to collapse
You can get Assistant working on the G3... I had it working with AICP and I'm sure it will work with CM but I haven't reinstalled it. The big issue for me was loosing "OK Google" Hotword. I followed the instructions here... https://forum.xda-developers.com/android/apps-games/google-pixel-experience-launcher-dialer-t3478907
Also, if anyone is interested, CrazySuperKernel is working very well with this ROM.... https://forum.xda-developers.com/lg-g3/development/kernel-crazysuperkernel-v1-t3521121
Matteo1219 said:
Also, if anyone is interested, CrazySuperKernel is working very well with this ROM.... https://forum.xda-developers.com/lg-g3/development/kernel-crazysuperkernel-v1-t3521121
Click to expand...
Click to collapse
Thanks, i will give this ROM and Kernel a try once i get my replacement battery
Installed this ROM and so far it is pretty good! Thanks to the dev for the time and effort to put out a good system unlike some of the others who are posting N ROMs that do not work with the phone (ie data, mms, etc). I hope to see further development of this ROM but that might be difficult with CM getting out of the custom OS business.... Great work and thanks again!
len207 said:
Installed this ROM and so far it is pretty good! Thanks to the dev for the time and effort to put out a good system unlike some of the others who are posting N ROMs that do not work with the phone (ie data, mms, etc). I hope to see further development of this ROM but that might be difficult with CM getting out of the custom OS business.... Great work and thanks again!
Click to expand...
Click to collapse
keep an eye on this page, we're supposed to start seeing official builds this weekend (hopefully today)
https://download.lineageos.org/
chat:
https://webchat.freenode.net/?channels=lineageos
The great @Shelnutt2 has continued posting updates for the ls990.... http://downloads.codefi.re/shelnutt2/g3/ls990/laos14_1
I got stuck on "Tap & Go" during setup... Don't have another device to try this and it's not letting me skip it
Matteo1219 said:
The great @Shelnutt2 has continued posting updates for the ls990.... http://downloads.codefi.re/shelnutt2/g3/ls990/laos14_1
Click to expand...
Click to collapse
Is data texting mms working on sprint?? Still domestic roaming issue??
Matteo1219 said:
The great @Shelnutt2 has continued posting updates for the ls990.... http://downloads.codefi.re/shelnutt2/g3/ls990/laos14_1
Click to expand...
Click to collapse
latest vesion of that rom still switches from digital roaming to sprint. i get lte texting on digital roaming and calls on sprint (
erik077 said:
I got stuck on "Tap & Go" during setup... Don't have another device to try this and it's not letting me skip it
Click to expand...
Click to collapse
With a clean install? Which GApps package are you using?
Related
This is ported from @infected_ and his amazing work! I have been personally porting his roms for my i777 for awhile and have been blown away with how much of a difference SaberMod and Linaro have made to the ROM. I have ported this rom with permission to share some 4.4 goodness with the rest of my fellow i777 users. I may keep porting future releases but have not decided yet.
First and foremost, I nor @infected_ are responsible for what you do to your device and YOU accept full responsibility if there are ANY issues.
IF there are any issues please don't blow up @infected_ 's threads looking for support because you will find none. Please just do some research first before posting an issue. Since this is an Alpha build, someone may have already posted a fix for an issue your having in one of the i9100 threads.
I have personally tested this rom out and everything seems to been in working order. I may have missed something though so please don't quote me. The one thing I have noticed is the Battery Percentage is not correct.
Rom: Build 11/23/2013
GApps: 20130813
Older Builds:
Build 11/20/2013
Instructions:
First make a nandroid backup (DUH)
Make sure you are on the newest CWM recovery. These easiest way i do this is flash the newest CM Nightly
Once you flash the newest CM Nightly, reboot recovery
Wipe Data/ Factory Reset
Wipe Cache/ Dalvic Cache
Format System
Flash ROM
Flash GApps
WIPE DATA/ FACTORY RESET (If you don't you will get stuck on CM Logo)
Enjoy
Change Log: http://review.cyanogenmod.org/#/q/statuspen+branch:cm-11.0,n,z
Thread I am porting from: http://forum.xda-developers.com/showthread.php?t=2535369
renderbroken said:
this is ported from @infected_ and his amazing work! I have been personally porting his roms for my i777 for awhile and have been blown away with how much of a difference sabermod and linaro have made to the rom. I have ported this rom with permission to share some 4.4 goodness with the rest of my fellow i777 users. I may keep porting future releases but have not decided yet.
first and foremost, i nor @infected_ are responsible for what you do to your device and you accept full responsibility if there are any issues.
if there are any issues please don't blow up @infected_ 's threads looking for support because you will find none. Please just do some research first before posting an issue. Since this is an alpha build, someone may have already posted a fix for an issue your having in one of the i9100 threads.
I have personally tested this rom out and everything seems to been in working order. I may have missed something though so please don't quote me. The one thing i have noticed is the battery percentage is not correct.
Rom: http://d-h.st/szt
gapps: http://d-h.st/pba
instructions:
First make a nandroid backup (duh)
make sure you are on the newest cwm recovery. These easiest way i do this is flash the newest cm nightly
once you flash the newest cm nightly, reboot recovery
wipe data/ factory reset
wipe cache/ dalvic cache
format system
flash rom
flash gapps
wipe data/ factory reset (if you don't you will get stuck on cm logo)
enjoy
thread i am porting from: http://forum.xda-developers.com/showthread.php?t=2535369
Click to expand...
Click to collapse
any fix for battery percentage problem
CWM recovery build
what CWM recovery build do i need im running 6.0.4.4, iv heard i would need 6.0.4.5. Is that infact the one i need for it to run kitkat?
eddiemc12 said:
any fix for battery percentage problem
Click to expand...
Click to collapse
I know there was a flashable zip in Wayland's original CM11 for i9100 thread. I am looing at building nightlies for the i777 and believe the source has already been fixed. In the meantime I will keep porting @infected_ 's builds and will see if its fixed in his newest build and if it persists when porting it over. It may also be a device issue.
bigbossmcg said:
what CWM recovery build do i need im running 6.0.4.4, iv heard i would need 6.0.4.5. Is that infact the one i need for it to run kitkat?
Click to expand...
Click to collapse
I just flashed the CM nightly of 11/13/2013 and used its recovery. Im sorry I dont remember the CWM version.
RenderBroken said:
I know there was a flashable zip in Wayland's original CM11 for i9100 thread. I am looing at building nightlies for the i777 and believe the source has already been fixed. In the meantime I will keep porting @infected_ 's builds and will see if its fixed in his newest build and if it persists when porting it over. It may also be a device issue.
Click to expand...
Click to collapse
PERSONS on the i9100 thread are having the same issues with their devices
eddiemc12 said:
PERSONS on the i9100 thread are having the same issues with their devices
Click to expand...
Click to collapse
Sorry, the original link is down. I will keep an eye out for a fix
RenderBroken said:
Sorry, the original link is down. I will keep an eye out for a fix
Click to expand...
Click to collapse
I was able to flash this rom pretty easily. That's all I can really say for it though.
I flashed twice (followed the OP steps) and both times, none of the sounds work. I'll try it out another time when the sound is back. I'm excited this is finally becoming more of a reality for this device now though.
Thanks for your hard work!
PS- I did make a phone call while on it, and it worked fine.
got this to boot! phone is dead, so can't do too much testing but just wondering how to get the google launcher?
BInspirinG said:
I was able to flash this rom pretty easily. That's all I can really say for it though.
I flashed twice (followed the OP steps) and both times, none of the sounds work. I'll try it out another time when the sound is back. I'm excited this is finally becoming more of a reality for this device now though.
Thanks for your hard work!
PS- I did make a phone call while on it, and it worked fine.
Click to expand...
Click to collapse
Thats weird, I was able to use my bluetooth and heard sounds but they were kinda low. If there is an update I will port it today.
RenderBroken said:
Thats weird, I was able to use my bluetooth and heard sounds but they were kinda low. If there is an update I will port it today.
Click to expand...
Click to collapse
Interesting. Do you have sounds for the ringer, notifications, and alarm clock?
BInspirinG said:
Interesting. Do you have sounds for the ringer, notifications, and alarm clock?
Click to expand...
Click to collapse
I have already flashed back to my daily driver. I have also ported @infected_ 's 10.1.3v2 Sabermod/Linaro rom. I work two jobs and am pretty busy but I am setting up my build environment for CM11. I have bookmarked all of Wayland's fixed for different bugs and if they arent merged with the main source I will merge them in my own. The main thing I am working out now is setting up the proprietary blobs for the i777 and integrating them in the CM11 source to build with. The problem is there isn't a repo already setup for CM11 so I will have to create it. Entropy has done most of the work for it for OmniRom and I will most likely be using most of his i777 source. This part is new to me so I am learning this on the way. Once everything is setup and I am able to build functional builds I will try to then use the Sabermod tool-chain along with Linaro for the kernel. @infected_ has inspired me to mimic what he is doing for the i9100 and I have seen how big a difference it has made for my phone. I will post the CM10.1.3v2 port today as well. As I said I use this as my daily driver and everything works on it. Including GPS!
Kind Regards,
Render
RenderBroken said:
I have already flashed back to my daily driver. I have also ported @infected_ 's 10.1.3v2 Sabermod/Linaro rom. I work two jobs and am pretty busy but I am setting up my build environment for CM11. I have bookmarked all of Wayland's fixed for different bugs and if they arent merged with the main source I will merge them in my own. The main thing I am working out now is setting up the proprietary blobs for the i777 and integrating them in the CM11 source to build with. The problem is there isn't a repo already setup for CM11 so I will have to create it. Entropy has done most of the work for it for OmniRom and I will most likely be using most of his i777 source. This part is new to me so I am learning this on the way. Once everything is setup and I am able to build functional builds I will try to then use the Sabermod tool-chain along with Linaro for the kernel. @infected_ has inspired me to mimic what he is doing for the i9100 and I have seen how big a difference it has made for my phone. I will post the CM10.1.3v2 port today as well. As I said I use this as my daily driver and everything works on it. Including GPS!
Kind Regards,
Render
Click to expand...
Click to collapse
That's awesome! I'm excited to see your progress on this phone.
Testing Your Builds
:good::laugh:
I have a extra i777 I use to test Roms and Kernels for various dev's. I would be honored when ever your ready to do this for you and give you input....
Teknodad1974 said:
:good::laugh:
I have a extra i777 I use to test Roms and Kernels for various dev's. I would be honored when ever your ready to do this for you and give you input....
Click to expand...
Click to collapse
Sure, I have some time this evening to work o nit further and will keep you posted.
Installing it now... Will check it out and await your PM....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I777 using XDA Premium 4 mobile app
flying colors
great port after a full day of testing the rom ran great no problems other than the batter bug runs better than 4.3.1 ever did on my i777
phone works
camera works both the pics and rec
games i've tested works (gba emu, and plants v zombies 2) both would freeze or FC on my 4.3
sorry but i have to say this launcher is better though http://goo.gl/19HBuF
and not a single random FC yet
There is a new CM11 build that I am working to port asap. I do know the Battery bug has been fixed along with numerous other commits. I will upload it ASAP.
Kind Regards,
Render
RenderBroken said:
There is a new CM11 build that I am working to port asap. I do know the Battery bug has been fixed along with numerous other commits. I will upload it ASAP.
Kind Regards,
Render
Click to expand...
Click to collapse
thanks in advance looking forward to trying out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome everyone once again to a brand new Android. Here you will find unofficial builds for LiquidSmooth v4.0 running Android 5.0 Lollipop. Bare in mind that these are currently in the ALPHA stage, so expect bugs here and there and things to be a little off. This is early in development and may or may not be daily driver ready yet. And now, on with the show.
Click to expand...
Click to collapse
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Code:
[URL="https://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
Code:
You can download the latest build from [URL="https://www.androidfilehost.com/?fid=95832962473398652"][COLOR="Blue"]]RIGHT HERE[/COLOR][/COLOR][/URL] (Current Build: 12/06 )
Gapps can be found [URL="https://www.androidfilehost.com/?fid=95832962473398367"][COLOR="Blue"]here[/COLOR][/URL] thanks to @rogersb11
INSTALLATION INSTRUCTIONS
1) DO A BACKUP!
2) If you haven't prior to this step, flash the Shift Eternal CM12 kernel, then reboot recovery.
3) Factory Reset, Wipe Cache, Wipe Dalvik.
4) Wipe System
4) Flash ROM then flash Gapps.
5) Reboot and enjoy!
Also note that the initial boot takes a good amount of time. Upwards of 10 minutes in some cases. Just be patient when you get ready to boot into the system. It will eventually start up.
IMPORTANT NOTE:
You must be on a Lollipop compatible kernel and recovery for this to flash. Currently, the only one available is the Shift Eternal CM12 kernel from @rogersb11. You can download it here. This ROM package contains the same kernel so you will not have to reflash it after flashing the ROM. Questions related to the kernel can be directed to this thread.
You will not have a keyboard upon the initial boot. Skip through the initial setup process then do the following:
Go to Settings>Language and Input
Select the current keyboard.
A pop up will then come up and you need to flip the hardware switch in the top right corner to on.
After this you can then go through with signing in with your account, setting up wifi, etc.
Please remember that these are UNOFFICIAL ALPHA BUILDS. This meaning nobody from the LiquidSmooth team should be expected to help you if you run into any issues. Bugs should be reported to THIS THREAD ONLY. I will do my best to address and fix them as I can. I'm not a master developer, just a builder. But I am learning, and I will try my best to track down fixes to relevant bugs.
Click to expand...
Click to collapse
KNOWN ISSUES
As reported by @rogersb11 in his CM12 thread, "If you don't have WiFi on the device will reboot upon going to sleep so LEAVE THE WIFI ON." This is a Lollipop bug in general, and currently has no fix.
SPECIAL THANKS
Special thanks to the entire LiquidSmooth team for building this awesome ROM. I just compile it from source for this device and the ROM would not be here without their dedication and hard work to provide it.
Special thanks also once again to @rogersb11 for his help and guidance and tireless work to bring the device tree up to be ready for Android 5.0 ... Seriously, this dude has coded his fingers to the bone to make this a reality. I wouldn't have this thread up and going already without him. So be sure to let him know how thankful you are for his work to keep this device alive.
XDA:DevDB Information
Unofficial LiquidSmooth v4.0 for the SGH-I777/959G, ROM for the AT&T Samsung Galaxy S II SGH-I777
Contributors
TheGeekyNimrod, rogersb11
Source Code: https://github.com/LiquidSmooth/android
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Current Beta Version: LiquidSmooth v4.0
Beta Release Date: 2014-12-06
Created 2014-12-07
Last Updated 2014-12-07
RESERVED
Reserved one more just because
TheGeekyNimrod said:
Reserved one more just because
Click to expand...
Click to collapse
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
omar71693 said:
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
Click to expand...
Click to collapse
Hmm. I'm not sure. Haven't had that issue. A guess says it could be the Gapps, but I can't say that for sure though because I tested with different Gapps than the ones listed. Have you tried going back and wiping Dalvik and reinstalling Gapps?
Sent from my SAMSUNG-SGH-I747
TheGeekyNimrod said:
Hmm. I'm not sure. Haven't had that issue. A guess says it could be the Gapps, but I can't say that for sure though because I tested with different Gapps than the ones listed. Have you tried going back and wiping Dalvik and reinstalling Gapps?
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Yeah, I actually did. I'm going to try some other things throughout the day and report back.
OMG, I can't believe there is ANOTHER lollipop build for the s2 . Oh BTW where you listed me as a contributer if you remove the @ before my username it will link me correctly. You don't need that on DevDB. Just edit profect at the top and then it automatically links the username without the @ in those contributor boxes
omar71693 said:
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
Click to expand...
Click to collapse
Yah, I'm having the same google play services FCs. I also tried bpear's Lollipop Gapps and that didn't work either . . .
NOTE: I did have the same problem on @rogersb11 Cm12 build too
I tested this with the 5.0 gapps from here. But if you try it, you will have to strip a few unneeded apps out of it for the sake of internal storage space. I can't remember exactly which ones I pulled out of it, but you can pretty much just use Google Play, Play Services, and Google Services Frameworks, and download the rest from the PlayStore
rogersb11 said:
OMG, I can't believe there is ANOTHER lollipop build for the s2 . Oh BTW where you listed me as a contributer if you remove the @ before my username it will link me correctly. You don't need that on DevDB. Just edit profect at the top and then it automatically links the username without the @ in those contributor boxes
Click to expand...
Click to collapse
Got it. I'm really not sure I like how the whole DevDB thing works. Should have just started a regular thread
I may possibly have another build out tomorrow with a few minor tweaks and a little overhaul to the UI. I don't know about everyone else, but I don't like the dark background of, say, the settings app. I'll be working on this and a few minor things tomorrow.
Sent from my SAMSUNG-SGH-I747
I haven't been able to get a working system. It usually hangs on the boot animation (animation freezes). Sometimes it gets to the optimizing apps screen, but it will hang there too. However, if I do NOT flash gapps, it's able to boot, but then hangs on the welcome screen (it freezes and doesn't accept any input). Between failed boot attempts, I'll wipe everything or even go as far as reflashing.
Any ideas?
sciguy125 said:
I haven't been able to get a working system. It usually hangs on the boot animation (animation freezes). Sometimes it gets to the optimizing apps screen, but it will hang there too. However, if I do NOT flash gapps, it's able to boot, but then hangs on the welcome screen (it freezes and doesn't accept any input). Between failed boot attempts, I'll wipe everything or even go as far as reflashing.
Any ideas?
Click to expand...
Click to collapse
Don't bother wiping everything.. Tried that two different times, still having the same results as you. I reverted back to KK and I'm just gonna wait for another build.
Sent from my SGH-I777 using XDA Free mobile app
Remember these are alpha builds. While I haven't had that issue with it yet, doesn't mean it won't happen for others. On mine, once I got to the setup screen I had to reboot the first time, then it allowed me to skip through until I was able to enable the keyboard. And it worked fine after that.
It will stabilize as time goes by for sure.
Sent from my SAMSUNG-SGH-I747
I had hoped to have another build out today, but I had a learning curve to get through first. But now that I have learned, should be late tonight or tomorrow. Mainly UI fixes, maybe a tweak or two elsewhere.
Sent from my SAMSUNG-SGH-I747
Finally! Android L for my GS2! Now to wait for an at&t GS4 custom Lollipop ROM.
[Q] About booting this ROM
When I flash the shift eternal kernel does it give me the right clockwork mod recovery I need to flash the rom? If not,where can I download it?
StoneyJSG said:
When I flash the shift eternal kernel does it give me the right clockwork mod recovery I need to flash the rom? If not,where can I download it?
Click to expand...
Click to collapse
It comes with PhilzTouch which is very a custom recovery based on CWM. It will be the right version for you to flash this and also the version and kernel that the ROM will be running.
Sent from my SAMSUNG-SGH-I747
Was hoping to have a new build posted today, but there are a few too many quirks with it for me to feel comfortable putting it out there. It boots, but there's a few things going crazy. I do believe I can get it worked out though, and will try to get another build done and put out tonight or tomorrow.
Biggest change right now is that I have reverted the Material Dark theme in favor of the Material Light theme that Lollipop is more known for right now. In the future, according to one of LS's lead developers, there will be a switch to go between the two.
Anyhoo, carry on.
My internal storage is not working. Google play services not working. Browser is also not working. Unable to install any app at all. Very nice rom though. Once a stable version is released i will use it as daily driver.
Official nightlies aren't happening anymore,
so here's a more up to date build. Vanilla cm12.1 except for eri.xml/apn tweaks and binfmt_misc enabled in kernel.
Special for the a5_chl Virgin Mobile US Desire 816,
may work ok on other a5's too.
Note: a5_dug, a5_dwg dual sim telephony are not working correctly. buyer beware.
Flashes fine with official TWRP.
Official HTC firmware here:
http://www.htc.com/us/support/htc-desire-816-virgin-mobile/news/
I strongly suggest updating your firmware to htc lollipop with an official ruu or you may have hardware issues like touchscreen, wifi, and/or bluetooth problems. It might work with kitkat firmware though, and you are free to try if you want. Post results if you do.
It appears kitkat firmware can cause not only touch issues but wifi issues.
xXminiWHOOPERxX said:
Okay ,
Rom and firmware are two different things... inside OTA's it contains a firmware.zip at which updates bootloader, radio, etc.... so without taking firmware upgrades and just installing what's released on XDA will lead you to bugs other users don't have ..
For Example :
4.4.4 firmware will work with 5.0.2 fine for some users and some have to update too 5.0.2 for Wi-Fi to work...
But any Android version past 5.0.2 you need to have either lollipop firmware or marshmallow firmware in order for Wi-Fi to work...
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
Wipe cache, data, and system for clean flash.
Dirty flash not recommended. 5.0 gapps crash on 5.1
If you wanna try a dirty flash I recommend wiping system, cache, and dalvik cache, then your apps and some settings may survive.
Disclaimer: Void warranty, not responsible for anything, you know flashing is your choice and any damage is your own problem.
issues:
mobile data sometimes needs toggled to activate, using airplane mode on/off.
apparently the livedisplay function isn't working well ( maybe not at all)
as mentioned above, dual sim devices not fully functional.
I'm afraid that since I have a mostly working marshmallow build, that needs TLC and attention paid to it, that I can't justify putting any more time into cm12. So unless there security patches released or something, the 12/25 is the last cm12 build I'm releasing.
Download folder:
https://androidfilehost.com/?w=files&flid=45601
visual voicemail see here: http://forum.xda-developers.com/showpost.php?p=64395211&postcount=38
sultanxda's SnapdragonCamera is included as of 12/25 build. it seems to freeze on the first picture after installation but works ok after that once rebooted.
I'm leaving the link to the source built from the ROM standalone camera zip in case anyone needs it. Flash in recovery. If you flashed the one I ripped from the Yureka forum, flash this one over it.
You may have to clear its app data if flashing over, and it may freeze. The 12/25 ROM seems to get along OK with the camera after the first picture and a reboot if you really want the camera.
https://www.androidfilehost.com/?w=files&flid=46051
Source: official CM repo with these changes:
https://github.com/bigsupersquid/android_device_htc_a5
https://github.com/TheMuppets/proprietary_vendor_htc
https://github.com/bigsupersquid/kernel_htc_msm8974_arch_arm_configs_cm_a5_defconfig
https://github.com/bigsupersquid/frameworks_base_core_res_res_xml_eri.xml
https://github.com/bigsupersquid/vendor_cm_prebuilt_common_etc_apns-conf.xml
https://github.com/bigsupersquid/android_packages_apps_SnapdragonCamera
screenshot of interesting format of app drawer:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for continuing the builds! I'm flashing right now and will let you know how it works.
(Flashing on HTC A5_CHL Sprint Prepaid)
EDIT:
Everything seems to be running smoothly, and I haven't found any bugs. (I haven't tested cellular or data, just wifi)
Even though it is said it's for CHL, I would appreciate if someone would try it on UL version and post the results.
bonczas said:
Even though it is said it's for CHL, I would appreciate if someone would try it on UL version and post the results.
Click to expand...
Click to collapse
it's tweaked for chl, but the device code detects several varieties.
according to the zip updater script:
This package is for device: a5,a5tl,a5dug,a5dwg,a5chl,a5ul;
as people test them I can add to the OP.
I only have a chl myself.
How usable is this build? Would you recommend it for daily smartphone use? Or is this just a preview / proof of concept?
Thanks!
Is the dual sim problem on a5dug will ever be fixed on our phone or is just a cyanogenmod 12 problem that will never be fixed. I searched hours on google and didn`t find anything useful...
Shedal said:
How usable is this build? Would you recommend it for daily smartphone use? Or is this just a preview / proof of concept?
Thanks!
Click to expand...
Click to collapse
It works as well as any other CM 12.1 build I've run on a device. I haven't found any bugs yet, besides the wifi cutting out briefly once.
I had flashed on 816W dual sim ,Both sim couldn't be detected
@bigsupersquid is 320 DPI the standard for the HTC Desire 816, or is that just the default that CM applies? Just curious, because the UI elements seem much bigger in CM than stock.
Thanks.
@bigsupersquid
Thanks man! I've been running it for about 3 hours with no problems, and its nice to have a up to date secure version of CM. Thanks a bunch for your work!
Flashed it on a5dug and could not detect both sims. I really hope u could make it work for all variants. I have been using 5.1.1 as my daily driver for 2 months now and i love it.
Do MMS and Bluetooth work well on this? Every other version of CM I've tried, bluetooth turns off after an hour or two and not even a reboot will turn it on again.
@Icelus I can try turning on BT and seeing how long it will stay on if you want. Is there a better way to test?
Icelus said:
Do MMS and Bluetooth work well on this? Every other version of CM I've tried, bluetooth turns off after an hour or two and not even a reboot will turn it on again.
Click to expand...
Click to collapse
my mms is OK on virgin mobile, and bt seems OK. I'll leave it on a while, then try to pair stuff and toggle it on and off to let you know.
over two hours, bt still on, pairs/forgets/pairs again/ fine, toggles off/on and reconnects automatically.
anyone with hardware issues:
I had another user update their firmware to lollipop to get around touchscreen problems with this rom and it worked.
I will add that to the OP with more info from users to verify the firmware needs to be updated. My htc evo 3d is certainly picky about its firmware and rom combinations.
Bandit Development said:
@bigsupersquid is 320 DPI the standard for the HTC Desire 816, or is that just the default that CM applies? Just curious, because the UI elements seem much bigger in CM than stock.
Thanks.
Click to expand...
Click to collapse
according to pdadb.net,
Pixel density (dot pitch): 266.4 pixel/inch (0.09533 millimetre/pixel)
I haven't checked the original build.prop to see what htc set it at.
qaliza said:
Flashed it on a5dug and could not detect both sims. I really hope u could make it work for all variants. I have been using 5.1.1 as my daily driver for 2 months now and i love it.
Click to expand...
Click to collapse
crazybasss said:
Is the dual sim problem on a5dug will ever be fixed on our phone or is just a cyanogenmod 12 problem that will never be fixed. I searched hours on google and didn`t find anything useful...
Click to expand...
Click to collapse
while I'd like to help with that, but I don't have the hardware to test on; without that there's too much guesswork. Google isn't much help, implies RIL patch based on other phones with same issue. Sorry. I'll add the info to the OP though.
Shedal said:
How usable is this build? Would you recommend it for daily smartphone use? Or is this just a preview / proof of concept?
Thanks!
Click to expand...
Click to collapse
This seems stable to me, actually haven't had one random reboot yet, or other noticable hiccup. Way better than the kitkat I daily drivered on my old optimus v.
Now if I decide to play with marshmallow, and actually get it booting, that would be proof of concept/alpha most likely.
Does this have the issue where Bluetooth turns off randomly while on and it becomes unable to be reenable until reboot? Cuz that's my only issue with cm12 so far
Icelus said:
Do MMS and Bluetooth work well on this? Every other version of CM I've tried, bluetooth turns off after an hour or two and not even a reboot will turn it on again.
Click to expand...
Click to collapse
bigsupersquid said:
my mms is OK on virgin mobile, and bt seems OK. I'll leave it on a while, then try to pair stuff and toggle it on and off to let you know.
over two hours, bt still on, pairs/forgets/pairs again/ fine, toggles off/on and reconnects automatically.
anyone with hardware issues:
I had another user update their firmware to lollipop to get around touchscreen problems with this rom and it worked.
I will add that to the OP with more info from users to verify the firmware needs to be updated. My htc evo 3d is certainly picky about its firmware and rom combinations.
Click to expand...
Click to collapse
exProphecy said:
Does this have the issue where Bluetooth turns off randomly while on and it becomes unable to be reenable until reboot? Cuz that's my only issue with cm12 so far
Click to expand...
Click to collapse
I'm not having any bluetooth problems at all. but I haven't done much more than test it to be sure it works, either. I'll leave it on longer and see if it drops out.
bigsupersquid said:
I'm not having any bluetooth problems at all. but I haven't done much more than test it to be sure it works, either. I'll leave it on longer and see if it drops out.
Click to expand...
Click to collapse
I can't keep mobile data going...I'm on VM but apparently where I'm at the switching between 3G and 4G makes it angry...
Sent from my 710C using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICPAndroid Ice Cold Project
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
.
.
.
.
.
In the beginning we would like to thank:
CM team
maxwen
SlimBean rom team
CarbonRom team
LiquidSmooth rom team
Omni rom team
DU team
Community
@LorD ClockaN
@zipsnet
@n3ocort3x
@semdoc
@eyosen
@alienmind
@Chezbel
@Drgravy
@eboye
.
.
.
We are now paying for servers that build nightlies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 11
Download link: 11/19 fireball
GAPPS (OpenGapps): http://opengapps.org/
Full Changelog link: goo.gl/mIgmYG
You tell...
ROMS should contain everything you need to enjoy Marshmallow. You are not required to install any Add Ons, simply download the latest ROM, gapps, flash it, and go!
You are STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup - these can cause stability issues that are very hard to debug. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
Don't do it if you don't know it
ROM has gapps persistance in between dirty flashes
KERNEL:
Kernel in this rom follows CM source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash over OTA app, TWRP recovery is needed.
You can still use CWM and OTA app, but only to download zip file and flash it manually from within recovery. Zip gets saved under AICP_ota folder on your internal SDcard.
If you want to contribute to the AICP or wanna see what is being worked on/merge feel free to visit our gerrit, link is at the bottom!!!
IceColdJelly AICP G+ community
XDA:DevDB Information
[ROM][MM][fireball] AICP - 11.0 [MODDED TWRP], ROM for the Verizon HTC Droid Incredible 4G LTE
Contributors
Beeko
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-09-19
Created 2016-09-20
Last Updated 2016-09-20
INITIAL RELEASE
- Must be on modified TWRP with fat/userdata swap HOW TO IS HERE
09/22/16
- Initial MM release
- CLEAN FLASH ONLY
10/23/16
- Hopeful fix for RIL problem
11/19/16 --WILL BE LAST PUBLIC RELEASE--
- ROM update and RIL fixed for sure
Download is live.
Can I get a mod to move this to the right forum and delete this post after?
Thanks for this update Hi bro I am using older version of this ROM so do I need to reinstall firmware and also again to all those methods I did in first time? Plus for some reason I m not able to send sms idk why... I tried many app but all failed anyways thanks for this update bro
Mak29 said:
Thanks for this update Hi bro I am using older version of this ROM so do I need to reinstall firmware and also again to all those methods I did in first time? Plus for some reason I m not able to send sms idk why... I tried many app but all failed anyways thanks for this update bro
Click to expand...
Click to collapse
No you don't need to do anything if you've already done the partition swap. I would make sure I am on MDMowers TWRP and you should be fine, don't dirty flash the ROM do clean flash only.
Beeko said:
No you don't need to do anything if you've already done the partition swap. I would make sure I am on MDMowers TWRP and you should be fine, don't dirty flash the ROM do clean flash only.
Click to expand...
Click to collapse
Thanks bro but with clean flash you mean wipe everything and then install ROM then gapps .?
And g apps suppose to be arm>6.0>aroma right?
Mak29 said:
Thanks bro but with clean flash you mean wipe everything and then install ROM then gapps .?
And g apps suppose to be arm>6.0>aroma right?
Click to expand...
Click to collapse
Yes, backup your stuff and wipe everything. And yes, you can use aroma if you'd like.
Any Specific Baseband?
Beeko, Is there a specific baseband/radio version for this ROM? I'm coming from PACROM 5.1.1 and the baseband that IT requires is installed. When I clean-flashed and booted phone into this ROM, I had no connection/wireless service. I'm going to attempt it again today and check out more possibilities I may have missed. Thank you for keeping this phone relevant and up to date.
actionville said:
Beeko, Is there a specific baseband/radio version for this ROM? I'm coming from PACROM 5.1.1 and the baseband that IT requires is installed. When I clean-flashed and booted phone into this ROM, I had no connection/wireless service. I'm going to attempt it again today and check out more possibilities I may have missed. Thank you for keeping this phone relevant and up to date.
Click to expand...
Click to collapse
I'll have to test when I get home, I don't think there were any new basebands so I'll look when I'm home.
Seems I can't get Verizon APN to show. I'll check the build and make a new one tonight/tomorrow
Beeko said:
Seems I can't get Verizon APN to show. I'll check the build and make a new one tonight/tomorrow
Click to expand...
Click to collapse
That is what I am seeing too, something like "apn not available for this user" or something similar - It won't allow me to add APN info.
actionville said:
That is what I am seeing too, something like "apn not available for this user" or something similar - It won't allow me to add APN info.
Click to expand...
Click to collapse
I'll be looking at it tonight/tomorrow. I've got some stuff for another device that I have to fix first tonight.
Beeko said:
I'll be looking at it tonight/tomorrow. I've got some stuff for another device that I have to fix first tonight.
Click to expand...
Click to collapse
As I said before, thanks for publicizing your interest in keeping this phone model "flowing". You have a donate paypal? I'll toss some bucks your way, since I have been using PacManRom, and now hearing from you about this...interactively. Glad to see people squeeze all performance out of (unsubsidized) 600.00 dollar pieces of gear, instead of contracts, latest and (perceived greatest) phone "upgrades".
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
actionville said:
As I said before, thanks for publicizing your interest in keeping this phone model "flowing". You have a donate paypal? I'll toss some bucks your way, since I have been using PacManRom, and now hearing from you about this...interactively. Glad to see people squeeze all performance out of (unsubsidized) 600.00 dollar pieces of gear, instead of contracts, latest and (perceived greatest) phone "upgrades".
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
Click to expand...
Click to collapse
I'm not accepting donations personally but thank you. I've been busy with other devices so I've kinda left this one in the dirt. But I'm gonna see what I can do for it here this next week or so.
New build in OP. Hopefully got the RIL problem fixed.
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Just wanted to pop in and say thanks for this ROM. It is really a great ROM. Super smooth and stable. It is not my main phone anymore but every now and then I switch to it for awhile for some reason. Not sure if it's the smaller size or the nostalgia (was my first smart phone), but I just can't seem to get rid of this phone. Was using your PAC Rom up until now, but it's good to get it updated to an MM based ROM for when I do use it.
Decryption Issues
Hi
when i turn on my htc it asks for a password..
could you provide it.
Beeko said:
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Click to expand...
Click to collapse
Thank you, again. The phone is like brand new with this Rom. No loggers, no adware shows up. Great having adaway built in. This Rom makes this old phone sooooo smooth, runs cooler, battery seems managed better. I'm not a fan of android coaxing me to format my SD to it, but I did (backed the contents up to Pc) so the phone has 32 gigs mem. Again, THANK YOU!
The only bug I have found so far, Is turning off mobile hotspot hangs, unless I restart, hotspot stays on. Sometimes I can get it to turn off if I tap hotspot settings or mess with wifi power button bar. On Pacman Rom, what fixed it for me was "allow wifi scanning even when wifi is off." I'm looking for similar settings to see if that does the trick.
Many Thanks Beeko!
Beeko said:
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Click to expand...
Click to collapse
Thanks for this rom, just posting this info for others who may want to know what it can/can't do.
I had a little trouble deciphering the conversion from stock to the swapped CM11/12 version ( I first tried what the page describes as for CM13 roms, but ended in boot loops with logcat choking on /data/media permissions)
ROM runs great. I had forgotten the issues with trying to get too many apps on the PacRom with stock partitions.
Data/cell seems fine, video playback excellent, it now makes for a nice portable media player.
I don't have it activated, so cant comment on the hotspot issue mentioned above but Bluetooth has issues.
Can turn on and see other devices, but I get the message "cant communicate to xx:xx:..." when trying to pair to a known working speaker.
A minor flaw in an otherwise great ROM.
Thanks for developing it.
edit: on a whim, I initiated pairing to my speaker, flipped the speaker's power on/off, and immediately the phone changed the mac address of the speaker to it's identifying name, and a pairing request popped up. Pairs successfully.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG V20
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 19.1 thread for the LG V20.
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
Official Builds:
h910
h918
h990
ls997
us996
us996d
vs995
Unofficial - built once a month by me, includes GApps and Pixel goodies:
h910
h918
h990
ls997
us996
us996d
vs995
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
IMS (VoLTE/Wi-Fi Calling) doesn't work due to framework tie-ins used by the LG proprietary binaries.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
This uses a port of Linux kernel version 4.4.
Kernel Source: https://github.com/LineageOS/android_kernel_lge_msm8996
Builds will roll within a week!
as this is based on android 12, and this device is about 6 years old, isn't it slow?
itt533 said:
as this is based on android 12, and this device is about 6 years old, isn't it slow?
Click to expand...
Click to collapse
Runs fine enough here - no worse than A11.
itt533 said:
as this is based on android 12, and this device is about 6 years old, isn't it slow?
Click to expand...
Click to collapse
better than 11 in my experience
Have anyoned tried dirty flashing from LOS18?
Cheers.
loyukfai said:
Have anyoned tried dirty flashing from LOS18?
Cheers.
Click to expand...
Click to collapse
Builds aren't out yet
Thanks for bringing 12 to the v20! Not complaining or arguing at all but why didn't you just skip 12 and move to 13 all together?
Lenny_One said:
Thanks for bringing 12 to the v20! Not complaining or arguing at all but why didn't you just skip 12 and move to 13 all together?
Click to expand...
Click to collapse
I planned to but Bluetooth is horridly broken on 13 for one reason or another - figured I wouldn't hold release back for it.
I'm new to the V20 and picked my used device last Thursday (990DS variant), already unlocked thanks to this forum and played with some ROM's and Kernels for a while.
I already downloaded and flashed the unofficial version and I really don't like the design language/choices that Google made, but it's working very well. The only thing that's not working (and I didn't notice on other ROM's) it's the FM Radio (I don't use, but tested with the stock before unlocking).
Since I try not using the physical buttons unless it's really necessary I use in Lineage 18 the volume panel to change it (the same panel it's not available in this release), and Simple Reboot for other tasks that requires the power button menu. But I discovered that the double tap to wake don't work after 5 seconds when you lock your device (If you try to use between 1 and 3 seconds it works), but after that you need to use the power button or the fingerprint. But If I wanna check notifications or the time without unlocking my device DT2W it's useful.
I personally use LineageOS for microG and when it's available there (or even a regular Lineage without gapps for testing) I will use this V20 as a daily driver since my OnePlus3 it's out of service because of my mistake with the LCD.
My sincere congratulations for the 4.4 Kernel porting, it's really impressive the work of the community here.
Off-topic: Since my last device was an OP3 I was really used to off screen gestures (flashlight, music playback etc). There's something similar that could be used in this device? Thanks!
Hi, thanks for your hard work OP and everyone who contributed to keep this old device of ours running up to date. We really appreciate it! It's my first time flashing a custom rom since the phone was released. Phone broke on me after a year of using (stock no root, ig something inside got damaged because of excessive heat) and on it's fourth year of hibernating I picked it up again and it miraculously somehow fixed itself. I'm in LOS 18.1 right now and so far IR isn't working. Where can I download the 19.1 and I see it's not in known bugs anymore, does IR work?
BTW, is it really not possible to use twrp instead of lineage recovery? Does migrate work on lineage recovery?
dextructor said:
Off-topic: Since my last device was an OP3 I was really used to off screen gestures (flashlight, music playback etc). There's something similar that could be used in this device? Thanks!
Click to expand...
Click to collapse
It's impossible to bake this in custom rom. Your best bet is to use apps that remap the button. There's plenty in play store.
0ldsoul said:
Hi, thanks for your hard work OP and everyone who contributed to keep this old device of ours running up to date. We really appreciate it! It's my first time flashing a custom rom since the phone was released. Phone broke on me after a year of using (stock no root, ig something inside got damaged because of excessive heat) and on it's fourth year of hibernating I picked it up again and it miraculously somehow fixed itself. I'm in LOS 18.1 right now and so far IR isn't working. Where can I download the 19.1 and I see it's not in known bugs anymore, does IR work?
BTW, is it really not possible to use twrp instead of lineage recovery? Does migrate work on lineage recovery?
Click to expand...
Click to collapse
You can use another recovery if you really want to, although los recovery streamlines everything. And i believe the ota updates may rely on having los recovery, npj will need to comment on that.
Overall, no, you don't NEED to use los recovery, but i'd recomend using it.
Also, no, ir still does not work.
xxseva44 said:
You can use another recovery if you really want to, although los recovery streamlines everything. And i believe the ota updates may rely on having los recovery, npj will need to comment on that.
Overall, no, you don't NEED to use los recovery, but i'd recomend using it.
Also, no, ir still does not work.
Click to expand...
Click to collapse
Lineage Recovery is needed for OTA yes.
And, really? IR is still broken?
npjohnson said:
Lineage Recovery is needed for OTA yes.
And, really? IR is still broken?
Click to expand...
Click to collapse
Yes, it still is broken on 4.4 unfortunately (and there's no sign of what the issue could be since 3.18), although we intend to patch it up once we're done with USB as a whole.
xxseva44 said:
You can use another recovery if you really want to, although los recovery streamlines everything. And i believe the ota updates may rely on having los recovery, npj will need to comment on that.
Overall, no, you don't NEED to use los recovery, but i'd recomend using it.
Also, no, ir still does not work.
Click to expand...
Click to collapse
I see. I don't really use OTA. I always manually update roms thru recovery.
AShiningRay said:
Yes, it still is broken on 4.4 unfortunately (and there's no sign of what the issue could be since 3.18), although we intend to patch it up once we're done with USB as a whole.
Click to expand...
Click to collapse
I guess the only way to get LOS 19.1 is thru OTA? I went to LOS website and there's only 18.1 available.
If 19.1 becomes available and I'm in 18.1 rn do I have to factory reset first before flashing 19.1?
0ldsoul said:
I see. I don't really use OTA. I always manually update roms thru recovery.
I guess the only way to get LOS 19.1 is thru OTA? I went to LOS website and there's only 18.1 available.
If 19.1 becomes available and I'm in 18.1 rn do I have to factory reset first before flashing 19.1?
Click to expand...
Click to collapse
Just follow the wiki guide, everything will work fineJust follow the wiki guide, everything will work fine
('h830', 'Wednesday, 2023-03-29')
('h850', 'Sunday, 2023-04-02')
('h910', 'Thursday, 2023-03-30')
('h918', 'Thursday, 2023-03-30')
('h990', 'Sunday, 2023-04-02')
('ls997', 'Sunday, 2023-04-02')
('rs988', 'Sunday, 2023-04-02')
('us996', 'Thursday, 2023-03-30')
('vs995', 'Tuesday, 2023-03-28')
Here is the build schedule for 19.1
Sorry if this is not allowed here. I just want to ask my v20 is still suffering from thermal throttling. Is my phone bad or does v20 really act like this? I'm in Los 18.1. I only do browsing and watching videos. I know this phone broke on me before due to excessive heating it even reached 50°C+. Currently the highest I had is 47.2°C while using. Are there any mods for Android 11? I saw one for Nougat. I don't think it will work on newer versions.
0ldsoul said:
Sorry if this is not allowed here. I just want to ask my v20 is still suffering from thermal throttling. Is my phone bad or does v20 really act like this? I'm in Los 18.1. I only do browsing and watching videos. I know this phone broke on me before due to excessive heating it even reached 50°C+. Currently the highest I had is 47.2°C while using. Are there any mods for Android 11? I saw one for Nougat. I don't think it will work on newer versions.
Click to expand...
Click to collapse
I don't have much to say for you software wise but you can try to replace the thermal pads and see if it yields better results for you.