[KERNEL]BlackReactorMOD[Linux v3.5.0][stable-0.5] Kernel for OnePlus X (Onyx) - OnePlus X Android Development

Code:
/*
* Your warranty is maybe still valid.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 90% BlackReactor kernel
Added FEATURES over BlackReactor:
MSM_LIMTER
(Complete control over your CPU)
(Per core control over min/max)
(You can set governors for each core)
FRANCO'S THERMAL DRIVER
GENTLE FAIR SLEEPERS
Installation Instructions:
*Copy BlackReactorMOD-[version]-[timestamp].zip to your SD card or Internal Storage
*Reboot to recovery
*Flash the zip in 1st step
*Clear Dalvik/ART Cache (Optional)
*Reboot
Downloads:
CM/AOSP
AFH
OOS
AFH
Feel free to request for features
I will surely try to add if I can
Use KA attached in the second post only otherwise you won't get per core control
CREDITS: 
 @Nachiket.Namjoshi
 @Subhrajyoti Sen
 @CertifiedBlyndGuy
Thank's for teaching me about kernels and being there all the time
XDA:DevDB Information
BlackReactorMOD, Kernel for the OnePlus X
Contributors
Adesh15
Source Code: https://github.com/Adesh15/BlackReactor_onyx
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 0.5
Stable Release Date: 2016-12-15
Created 2016-12-15
Last Updated 2016-12-17

FAQ
Q. Does it work on any ROM of Lolipop (Android 5.x.x) ?
A: I dont know. It should. Technically. Since this is in testing phase would you care to try and post on the thread?
Q. HOLY FUUUU, THIS KERNEL BURNT MY DEVICE, BRICKED MY OPX !!!!! Y u do dis? i crie ;-;
A: Ah, Sorry, I didnt mean to. maybe you did not do at least 1 of the following:
Did not flash kernel correctly as written in the instructions
Did not read disclaimer
U lying
Q: Doesn't boot with Sultan's CM, why?
A: Sultan's Source and mine dont see eye to eye. Head over here for explanation.
Q. Which ROMs Does it support then ?
A: Any MM (Android 6.x.x) and N (Android 7.x.x) based ROM (AOSP & CM), Please test on 5.x ROMs if you can
Q. Why this kernel takes so much time to boot?
A: Take a look at THIS post.
Q. What happens if I give current above 2200 while using `setcurr` utility?
A: Nothing, It wont accept.
Q. I Switch off my `Force Fast Charge` but it turns on after every reboot, WHY?
A: It is configured to do so, If you want to disable fastcharge behaviour, set your charging current to 0 using setcurr utility.

One more

Mine

Well done buddy good job :good::good:

Im using ur kernel for about 1week its great

LolHacker17 said:
Im using ur kernel for about 1week its great
Click to expand...
Click to collapse
Where did you get it ?

BlackReactorMOD: OOS stable-0.3
Added OOS version
Download link in OP
CHANGELOG:
Code:
* Added Franco's Thermal Driver

I browsing AFH to find blackreactor n i found BlackReactorMod at the top i think its the same as the original . ?

LolHacker17 said:
I browsing AFH to find blackreactor n i found BlackReactorMod at the top i think its the same as the original . ?
Click to expand...
Click to collapse
So, you flashed a random zip file found on AFH without a thread or source somewhere ?
You're very brave lol
To be more on topic, thanks OP, i'll give it a shot as i like Blackreactor on OOS for some time now

J0kker said:
So, you flashed a random zip file found on AFH without a thread or source somewhere ?
You're very brave lol
To be more on topic, thanks OP, i'll give it a shot as i like Blackreactor on OOS for some time now
Click to expand...
Click to collapse
Lel it easy lorh just backup hahaha

Update !
BlackReactorMOD CM/AOSP Stable-0.5
Downloads:
AFH
Changelog:
Code:
Update Hosts
Clean Up Adreno Idler
Reverted to previous Sound Driver

I tried oos version and I lost wifi, fresh install, I then flashed original black reactor and got wifi back, nobody else had this problem ?
I tried with and without wiping caches.
Maybe there's something to do with the fact that I'm running moos and not original oos.
But I thought there weren't change from the original kernel concerning wifi, so that's strange lol.

J0kker said:
I tried oos version and I lost wifi, fresh install, I then flashed original black reactor and got wifi back, nobody else had this problem ?
I tried with and without wiping caches.
Maybe there's something to do with the fact that I'm running moos and not original oos.
But I thought there weren't change from the original kernel concerning wifi, so that's strange lol.
Click to expand...
Click to collapse
This is weird.
I have just added Francos thermal driver over BlackReactor. Not done anything else.

J0kker said:
I tried oos version and I lost wifi, fresh install, I then flashed original black reactor and got wifi back, nobody else had this problem ?
I tried with and without wiping caches.
Maybe there's something to do with the fact that I'm running moos and not original oos.
But I thought there weren't change from the original kernel concerning wifi, so that's strange lol.
Click to expand...
Click to collapse
I lost wifi using boeffla kernel over moos
so probably there is some issue using custum kernel over moos rom

Hi, thanks for the kernel. Since the newest versions of blackreactor work on sultanized roms, maybe your kernel will work? Has anyone tried?

Kolio_xda said:
Hi, thanks for the kernel. Since the newest versions of blackreactor work on sultanized roms, maybe your kernel will work? Has anyone tried?
Click to expand...
Click to collapse
If BlackReactor works then this should work too

Adesh15 said:
If BlackReactor works then this should work too
Click to expand...
Click to collapse
Yes just flashed and boots fine.

Update !
BlackReactor: OOS-stable-0.4
Downloads:
GDRIVE
AFH
Changelog:
Code:
* Latest changes from BlackReactor
* Updated Hosts file
* Tuned up LMK
* December Security Patches
* Reactive CPUfreq Gov (recommended)
* optimised VFS
* WiFi problem must be fixed now
* Fixed thermal threshold levels(Should throttle properly)

Related

[ROM][5.1.1] VISION - A Temasek Based CM-12.1

VISION - A Temasek Based CM-12.1 for OnePlus 2
fast - smooth - battery friendly
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
HOWTO INSTALL
Code:
[B][I]Clean Installation[/I][/B]
1. Download the appropriate ROM.
2. Download the appropriate GApps.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1 Flash Kernel (if you use a custom one)
8. Flash the Gapps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.
[B][I]Mixed Flash/Update[/I][/B]
1. Download the appropriate ROM
2. WIPE SYSTEM.
3. Flash the ROM in recovery.
3.1 Flash Kernel (if you use a custom one)
4. Flash the GApps.
5. WIPE DALVIK/CACHE (for good measure).
6. Reboot Device.
[B][I]Dirty Flash/Update[/I][/B]
1. Download the appropriate ROM
3. Install the update zip from recovery.
3.1 Flash Kernel (if you use a custom one)
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
FEATURES
all things from Temasek's CM12.1
built-in (highly) optimized Kernel
TO-DO
make it more battery friendly
fix buglist
BUGS
Fingerprint
Laser Autofocus (disabled for now)
BUILD
compiled with GCC 4.9.3 with patches from Linaro and SaberMod
including JustArchi's Optimizations
including Arter97's Optimizations
ROM @ WebCS
Note: Custom Kernel break the Camera Fix. If you want you can try my recompiled AK Kernel.
GAPPS
THANKS
@codeworkx
@grarak
@Hima-Devs
@CyanogenMod
@temasek
@arter97
@neobuddy89
@ak
@many more kernel devs
XDA:DevDB Information
[ROM][5.1.1] VISION - A Temasek Based CM-12.1, ROM for the OnePlus 2
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-10-26
Last Updated 2015-12-18
VisionX Kernel
coming soon...
Changelog
CHANGELOG
03.12.2015 - now it is like my VISION
optimized art
optimized bionic
optimized libcore
optimized frameworks/base
optimized kernel (MAX) - stock kernel (NEW)
readd some missing stuff since official cm based
UPDATE: if you flash a build, wipe /system /cache and please wipe camera data after phone is booted up. NEW - is working for sure but i need someone who can confirm that MAX is working too and not only on my phone.
are you using the cm-12.1-exp branch?
I'll give it a spin
wifi and data connected but cant access..
chankalson said:
are you using the cm-12.1-exp branch?
Click to expand...
Click to collapse
chankalson said:
wifi and data connected but cant access..
Click to expand...
Click to collapse
exp branch isn't stable. i have a build with this and fingerprint causes instant reboot.
i have no problem with data and wifi. have you made a reboot?
Do not press the fingerprint option on unlock , causes a reboot.
Nice score
Woop.
Thanks @AuxXxilium
I wasn't able to download anything from Play Store
How strange. I can download from the playstore.
PhillyFlyer said:
I wasn't able to download anything from Play Store
Click to expand...
Click to collapse
you have to use the right gapps (64 bit) - best you use the link in my first post.
Hey man Dope ROM I am using it. I like it. Also I followed the link and downloaded nano gapps for 64 bit processor
Love to see you here AuxXxilium ... you made an awesome kernel for the OnePlus One ... Downloading now THANK YOU !
@AuxXxilium sorry for stupid question, I saw on first download link there are different versions of kernel and ROM, can I use those safely ?
nice to see Temasek builds spread to more devices....
wollax said:
@AuxXxilium sorry for stupid question, I saw on first download link there are different versions of kernel and ROM, can I use those safely ?
nice to see Temasek builds spread to more devices....
Click to expand...
Click to collapse
all that i upload are stable and tested by me. latest builds should be the best new build is coming in about 2 hours.
AuxXxilium said:
all that i upload are stable and tested by me. latest builds should be the best new build is coming in about 2 hours.
Click to expand...
Click to collapse
... ok let's start with this new adventure! thanks a lot :good::good::good::good::good:
Been on this Rom for over 24 hrs. My OP2 now has wings! Stock kernel is also a beast!
Thanks for the port, can you give us any details regarding your kernel?

[WIP][ROM][Redmi 2] CAF_AOSP_7.x.x for Redmi2 WT88047

Hi, this rom is built using sources from Codeaurora, branch LA.BR.1.2.9_rb1.12 with some adjustments to fit our "little precious... "
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
It boots on KK and L Bootloader
INSTALLATION
- MAKE BACKUP of your working rom before flashing this one.
- Extract boot.img from the zip and flash it via fastboot
- Copy the zip to your SDCard
- Boot into recovery
- Wipe System, Data, Cache, Dalvik Cache
- Flash the zip
- Reboot your device
First boot takes some minutes. Wait patiently.
WORKING
- Wifi,
- Bluetooth,
- RIL (voicecall, sms, data),
- SDCard,
- audio
- Camera
- FM radio
- GPS
- Torch
NOT WORKING
-???
SOURCES
https://github.com/redmi2
CREDITS
@premaca
me
you
everyone
DOWNLOADS
Basketbuild
If you want root, flash SuperSU
Gaaps are not included, choose your own package..
XDA:DevDB Information
CAF, ROM for the Xiaomi Redmi 2
Contributors
pirej
Source Code: https://www.codeaurora.org/cgit/quic/la
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: CAF AOSP
Version Information
Status: Beta
Created 2016-12-25
Last Updated 2017-02-24
Changelog:
31.01.2017
Updated all of the sources up to the latest CAF branch LA.BR.1.2.9_rb1.11 from 27.1.2017
The Lollipop bootloader compatibility introduced new bug -> "led notifications dont work"
"CM-FileManager still FC"
"SIM Cards options in Settings can't open"
All in all, its mainly full sources update, with a little faster kernel, and no bug fixes yet.
Click to expand...
Click to collapse
24.2.2017
Updated all of the sources up to the latest CAF branch LA.BR.1.2.9_rb1.12 from today 24.2.2017
Torch not working reliable.. fixed
Screen not powering off in offline charging .. fixed
SnapdragonGallery fc when entering edit mode.. fixed
Click to expand...
Click to collapse
another
Yay!!
Congrats! @pirej caf is really slow to release
i think @premaca has build this rom before?

			
				
nicknitewolf said:
Congrats! @pirej caf is really slow to release
Click to expand...
Click to collapse
Yes, the latest release is from 28 November
Nice to know you're back man
Good luck with the bugs, hope you can fix them so we can have an real and fast pure AOSP
congrats and great to know you're back @pirej
Oh.. It still doesn't support lollipop firmware , hope you can fix it.
Mr said:
Oh.. It still doesn't support lollipop firmware , hope you can fix it.
Click to expand...
Click to collapse
Did you flash it.. or??
pirej said:
Did you flash it.. or??
Click to expand...
Click to collapse
I flash it through TWRP and it can't boot , just stuck in "MI" logo
---------- Post added at 08:34 AM ---------- Previous post was at 08:32 AM ----------
pirej said:
Did you flash it.. or??
Click to expand...
Click to collapse
By the way, your link was dead.So I am not sure whether I got the correct files
Mr said:
I flash it through TWRP and it can't boot , just stuck in "MI" logo
---------- Post added at 08:34 AM ---------- Previous post was at 08:32 AM ----------
By the way, your link was dead.So I am not sure whether I got the correct files
Click to expand...
Click to collapse
If the link is dead.. and its dead.. WHAT did you flash
pirej said:
If the link is dead.. and its dead.. WHAT did you flash
Click to expand...
Click to collapse
LoL :laugh: :laugh:
Caf Explained!
You might have seen that name all over the forums back when kernel developers for Qualcomm Snapdragon devices maintained two separate forks of their work. One for code based on Google’s AOSP, and another based on CAF. Code Aurora Forum is maintained by the Linux Foundation, and is where Qualcomm releases the reference sources for their various platforms. Most OEMs base their kernel source off of what’s provided by Qualcomm. On the other hand AOSP works off of a fork of CAF for each Android software iteration, introducing new features for all Android devices along the way. Over time, CAF then introduces its own optimizations intended specifically for Snapdragon devices.
New build out, updated to 7.1.1 , and fixed audio.
Sorry for being slow..
The audio fix was the easiest ever to do, but i was looking at the wrong places until now
pirej said:
New build out, updated to 7.1.1 , and fixed audio.
Sorry for being slow..
The audio fix was the easiest ever to do, but i was looking at the wrong places until now
Click to expand...
Click to collapse
Woo thanks bro ? downloading[emoji14]
Sent from my Redmi 2 using XDA-Developers Legacy app
Ok, some news finally..
GPS and Camera fixed too
I have to get sources sorted and ill upload the latest build soon.
There are probably a lot of glitches here and there, but ill play with it some more.. and we will see
I hope to make it boot on L bootloader soon.
pirej said:
Ok, some news finally..
GPS and Camerafixed too
I have to get sources sorted and ill upload the latest build soon.
There are probably a lot of glitches here and there, but ill play with it some more.. and we will see
I hope to make it boot on L bootloader soon.
Click to expand...
Click to collapse
This'll fix hard reset on lp bootloader.
https://github.com/CyanogenMod/andr...mmit/41111cedb1bdd8b904a6660a10441dcdc7628d4c

[KERNEL] [GT-S5282] [CM13] Nougat Kernel Backward Ported to Marshmallow

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
I CANNOT GUARANTEE YOU A PERFORMANCE BOOST AFTER THIS,
THIS KERNEL IS JUST AN EXPERIMENT WHICH SUCCEEDED
Mini Features
Disable ZRAM for reduced CPU loads
Reason:
Enabled ZRAM can improve memory usage in a cost of high CPU load.
Since cgroups and ksm is already enabled in MM, I don't think we need more memory management,
we need CPU optimizations more since CM13 is pretty laggy
Set Deadline as default scheduler
Reason:
Measurements have shown that the deadline scheduler outperforms the CFQ scheduler for certain multithreaded workloads
Bugs
Same as CM13, RIL takes a long time to work.
Installation Instructions
Download and put the zip in your phone
You must use an SELinux enabled recovery. I recommend TWRP 3.0.2
Go to recovery and flash the downloaded zip
Reboot
Credits
LahKeda ,Corphish , Dreamstar , Psych.Half , Andii_nr , Regalstreak , Doesntexits && Ngoquang2708
Screenshot
RJinxed said:
Code:
#include <std_disclaimer.h>
/*
[hide]* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
I CANNOT GUARANTEE YOU A PERFORMANCE BOOST AFTER THIS,
THIS KERNEL IS JUST AN EXPERIMENT WHICH SUCCEEDED
Mini Features
Disable ZRAM for reduced CPU loads
Reason:
Enabled ZRAM can improve memory usage in a cost of high CPU load.
Since cgroups and ksm is already enabled in MM, I don't think we need more memory management,
we need CPU optimizations more since CM13 is pretty laggy
Set Deadline as default scheduler
Reason:
Measurements have shown that the deadline scheduler outperforms the CFQ scheduler for certain multithreaded workloads
Bugs
Same as CM13, RIL takes a long time to work.
Installation Instructions
Download and put the zip in your phone
You must use an SELinux enabled recovery. I recommend TWRP 3.0.2
Go to recovery and flash the downloaded zip
Reboot
Credits
I give no credits for myself. Technically this is still the work of
LahKeda ,Corphish , Dreamstar , Psych.Half , Andii_nr , Regalstreak , Doesntexits && Ngoquang2708
Screenshot
Click to expand...
Click to collapse
[/hide]
WoW!
Is the cpu_freq driver enabled?
Any custom frequencies?
I don't have cm13 right now
Is there any improvement after installing that kernel?
thanks
BatDroid said:
[/hide]
WoW!
Is the cpu_freq driver enabled?
Any custom frequencies?
I don't have cm13 right now
Is there any improvement after installing that kernel?
thanks
Click to expand...
Click to collapse
it wasnt enabled in cm14.1 so, nope. also ive no plan of adding it since i experience alot of freezes from it (from lahkedas overclocked kernel) especially when playing videos. it freezes halfway through.
also, I experienced a slight boost. It's not as fast as cm11/slimkat but I feel it's way faster than the original cm13. I cant say itll work the same for you tho.
RJinxed said:
it wasnt enabled in cm14.1 so, nope. also ive no plan of adding it since i experience alot of freezes from it (from lahkedas overclocked kernel) especially when playing videos. it freezes halfway through.
also, I experienced a slight boost. It's not as fast as cm11/slimkat but I feel it's way faster than the original cm13. I cant say itll work the same for you tho.
Click to expand...
Click to collapse
disable memory allocation for camera and enable cpu_freq driver.
Hope there wont b any lags and hangs.
@RJinxed
a little off topic bro.
And sorry 4that 2
do u have the latest stock firmware?
build - XXANF3
or XXANF4?
can u share it with us?
we have a really big problem :'(
BatDroid said:
@RJinxed
a little off topic bro.
And sorry 4that 2
do u have the latest stock firmware?
build - XXANF3
or XXANF4?
can u share it with us?
we have a really big problem :'(
Click to expand...
Click to collapse
I dont have it, sorry.
The only stock rom I have is the stock deodexed prerooted.
But here's a link I found which contains every firmware for S5282
http://samsung-updates.com/device/?id=GT-S5282
RJinxed said:
I dont have it, sorry.
The only stock rom I have is the stock deodexed prerooted.
But here's a link I found which contains every firmware for S5282
http://samsung-updates.com/device/?id=GT-S5282
Click to expand...
Click to collapse
Useless.
I have tried dloading from it already and failed.
But thanks for searching

			
				
RJinxed said:
I dont have it, sorry.
The only stock rom I have is the stock deodexed prerooted.
But here's a link I found which contains every firmware for S5282
http://samsung-updates.com/device/?id=GT-S5282
Click to expand...
Click to collapse
does this kernel has high contrast bug?
BatDroid said:
does this kernel has high contrast bug?
Click to expand...
Click to collapse
FYI, I never actually faced the contrast bug in any rom and any kernel except in Zapdos 2.0 back then when it was still called "croco kernel".
But after that, I never faced this bug in CM11, SlimKat, Stock, CM13, CM14.1, CM10.1 and ANY kernel.
RJinxed said:
FYI, I never actually faced the contrast bug in any rom and any kernel except in Zapdos 2.0 back then when it was still called "croco kernel".
But after that, I never faced this bug in CM11, SlimKat, Stock, CM13, CM14.1, CM10.1 and ANY kernel.
Click to expand...
Click to collapse
@BatDroid it is only we are facing the contrast bug how is it possible.
i love to have custom ROM in my phone but the contrast bug????
btw Rjinxed could you please reply which firmware do you use
dial *#1234# in phone take screenshot and post it here please
RJinxed said:
FYI, I never actually faced the contrast bug in any rom and any kernel except in Zapdos 2.0 back then when it was still called "croco kernel".
But after that, I never faced this bug in CM11, SlimKat, Stock, CM13, CM14.1, CM10.1 and ANY kernel.
Click to expand...
Click to collapse
@dabakale
That's definitely a firmwarebased problem.
Try with 'XXANF4' latest one for us.
Or try flashing slimkat rom and then r10 kernel.
See if the bug still there.
Then flash cm10 or 11 over it.
BatDroid said:
@dabakale
That's definitely a firmwarebased problem.
Try with 'XXANF4' latest one for us.
Or try flashing slimkat rom and then r10 kernel.
See if the bug still there.
Then flash cm10 or 11 over it.
Click to expand...
Click to collapse
ok i will try and report
btw that bug solved in ur phone
@BatDroid i flashed XXANF4 firmware after that i flashed r10 kernel but problem still not solved??
on XXANF4 firmware i tried cm 11/10/12/13 but no success
i m literally annoyed with this bug??
what to do next?
dabakale said:
@BatDroid i flashed XXANF4 firmware after that i flashed r10 kernel but problem still not solved
did u make a system wipe before flashing through ODIN?
last test,
get fake_slimkat by xtrmex
flash stock kernel mod by cleverior.ipul
(that is d only kernel that don't have brightness bug)
than flash r10
note : I meant slimkat jb not slimKK
Click to expand...
Click to collapse
BatDroid said:
dabakale said:
@BatDroid i flashed XXANF4 firmware after that i flashed r10 kernel but problem still not solved
did u make a system wipe before flashing through ODIN?
last test,
get fake_slimkat by xtrmex
flash stock kernel mod by cleverior.ipul
(that is d only kernel that don't have brightness bug)
than flash r10
note : I meant slimkat jb not slimKK
Click to expand...
Click to collapse
yes i flashed fake slimkat
i saw ur post lately
so now again what i did is
1. i wiped system/boot/cache/data/internal storage from twrp
2.go to download mode and flashed XXANF3 through odin and twrp after that.
3. enter twrp full wipe again as told in 1st point
4. flash fake slimkat and r10 kernel
5. reboot
after booting in 10 minutes contrast bug appeared? ???!!!
Click to expand...
Click to collapse
dabakale said:
BatDroid said:
yes i flashed fake slimkat
i saw ur post lately
so now again what i did is
1. i wiped system/boot/cache/data/internal storage from twrp
2.go to download mode and flashed XXANF3 through odin and twrp after that.
3. enter twrp full wipe again as told in 1st point
4. flash fake slimkat and r10 kernel
5. reboot
after booting in 10 minutes contrast bug appeared
u cant make a full wipe after flashing stock.
try dirty flashing..
(just do a factory reset and flash slimkat)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@BatDroid
please could u explain step by step what i should do
now i m on XXANF4 fake slimkat
dabakale said:
@BatDroid
please could u explain step by step what i should do
now i m on XXANF4 fake slimkat
Click to expand...
Click to collapse
Do a full wipe including system
flash stock
then flash r10 over it
BatDroid said:
Do a full wipe including system
flash stock
then flash r10 over it
Click to expand...
Click to collapse
did full wipe
flashed XXANF4
flashed r10
reboot
but problem not solved

[KERNEL][8.x] Destroyer Kernel [POTTER][07/01]

DESTROYER KERNEL
Hi guys, this is Destroyer Kernel for Potter.
There are separate builds for Nougat, Oreo & Stock. Enjoy!
Code:
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Features:
- Updated to latest Motorola & CAF Sources
- Upstreamed to latest version 3.18.91!
- Build with Linaro Toolchain
- All features of the Lineage Kernel
- Improved Battery Life
- Less Battery is drained on standby
- Wi-Fi disconnecting issue is fixed
- SdCardfs (Oreo)
- Sound Control!
- New FP navigation commits.
- Double tap to wake, Sweep to wake and sleep .
- KCAL Support.
More features will be coming in near future! Stay Tuned
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
Tweak the kernel with Kernel Auditor, EX Kernel Manager or any other Manager you like.
Stock:
(Please read this before flashing stock build)
It's version is 3.18.31 it may get upstreamed somewhere in future..
Camera is not working on build number NPN25.137-35 & NPN25.137-43 rest everything is working.. If you have flashed this build on those two build numbers you can flash this boot.img via twrp and the camera will be back again..
Thanks to Martichou & Keertesh for helping me out!
Download:
Nougat | Oreo-x64 | Stock​
XDA:DevDB Information
Destroyer Kernel, Kernel for the Moto G5 Plus
Contributors
manikchathli, keertesh
Source Code: https://github.com/manikchathli/Destroyer-Kernel
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-01-07
Created 2017-08-19
Last Updated 2018-01-07
Thanks its an awesome kernel
Thank you.
Sent from my Moto G (5) Plus using Tapatalk
Please add maple I/o
Edit: I tried to paste the details but I guess I can't do that with xda labs? @manikchathli the kernel is already running well though. Maybe because of Uber? IDK I like it though
New Update is UP!
New update of Destroyer™ Kernel
~ Upstreamed to 3.18.67! ?
~ Added fingerprint booster!
Pretty new to Kernel Flashing
Do I have to Re flash the Lineage ROM or flashing the kernel on top of it works?
vee.vardhan said:
Do I have to Re flash the Lineage ROM or flashing the kernel on top of it works?
Click to expand...
Click to collapse
Flash rom.
Then gapps.
Then kernel.
Then magisk or supersu whichever you prefer.
vee.vardhan said:
Do I have to Re flash the Lineage ROM or flashing the kernel on top of it works?
Click to expand...
Click to collapse
No need to flash the ROM again just flash the kernel..
manikchathli said:
New update of Destroyer™ Kernel
~ Upstreamed to 3.18.67! ?
~ Added fingerprint booster!
Click to expand...
Click to collapse
WTF is a fingerprint booster. Sounds like a ram booster.
Sent from my Motorola XT1687 using XDA Labs
triggerlord said:
WTF is a fingerprint booster. Sounds like a ram booster.
Click to expand...
Click to collapse
You know how touch boost works? Same thing just for the fingerprint scanner
zeft64 said:
You know how touch boost works? Same thing just for the fingerprint scanner
Click to expand...
Click to collapse
So increasing the sensitivity? Why not just say that instead of something that sounds like marketing BS?
Sent from my Motorola XT1687 using XDA Labs
triggerlord said:
So increasing the sensitivity? Why not just say that instead of something that sounds like marketing BS?
Click to expand...
Click to collapse
Because that's what it's called
zeft64 said:
Because that's what it's called
Click to expand...
Click to collapse
It's called increasing the sensitivity.
Sent from my Motorola XT1687 using XDA Labs
triggerlord said:
It's called increasing the sensitivity.
Click to expand...
Click to collapse
No... The kernel patch and feature itself is called fingerprint boost. And why are you trying to argue about this? Are you bored? It's not that serious ?
New Update is UP!
New update of Destroyer™ Kernel
~ Upstreamed to 3.18.68! ?
~ Added PegasusQ and Lionfish Governors!
This kernel can overclock?
pablofior said:
This kernel can overclock?
Click to expand...
Click to collapse
Nope
@manikchathli why does your kernel do this on boot? It eventually will idle and stop but then it seems like most of the load still stays on one core
EDIT: check next pay for screen shot. Forgot to upload them lol
Screenshots of weird (to me at least) kernel behavior
zeft64 said:
@manikchathli why does your kernel do this on boot? It eventually will idle and stop but then it seems like most of the load still stays on one core
EDIT: check next pay for screen shot. Forgot to upload them lol
Click to expand...
Click to collapse
Change the cpu governor to interactive for now and the problem will be fixed.. i will fix this issue in the next update!!

[Kernel][8.1][Stock] KaminariKernel [07 October 2018]

KaminariKernel​
Code:
#include "std_disclaimer.h"
/*
* Your warranty is definitely void now.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* A lot.
*
* Tl;dr: if your device crashes and burns, sorry, but I'm not to be blamed.
*/
Hiya fellas.
This is a sister project to the custom kernel I compiled for the original Moto G, for AOSP/Lineage/et cetera.
But my Moto G died months ago, and I, also months ago, got my hands into a Moto G5s, for which I compiled this kernel. I believe it's the only stock ROM-compatible custom kernel built for this device so far.
This will only work with Oreo. But if there's enough interest, I have some (older) Nougat-compatible builds ready.
Features:
Sources & Optimizations
- Based on Motorola's shared MSM8937/53 sources (cedric, potter, montana and sanders all use the same kernel source code)
- Compiled with Linaro 5.5
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Zen
Click to expand...
Click to collapse
Sound
- flar2's Sound Control
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
Click to expand...
Click to collapse
Extra Sh*t
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Release 1 Alpha 1 (Oreo only)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
If you wanna "tweak ALL the things", use Kernel Adiutor!
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @savoca, for Kcal Screen Control
- @flar2, a huge load of cherry-picks came from his sources
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (G5s, Stock Oreo), Kernel for the Moto G5S
Contributors
Kamin4ri
Source Code: https://github.com/Kamin4ri/kernel_motorola_msm8937
Kernel Special Features:
Version Information
Status: Testing
Current Beta Version: R1-alpha1
Beta Release Date: 2018-10-07
Created 2018-10-08
Last Updated 2018-10-07
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Because there was none for this poor device :/
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, check your wakelocks and fix them if you need to! The kernel (hopefully) isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: No. Stock ROM only.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. No Synapse support!
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work?
Click to expand...
Click to collapse
Reserved
RESERVED!!!
Another reserved post? Why not?
can use twrp for flash this zip? @Kamin4ri
ilovepanda said:
can use twrp for flash this zip? @Kamin4ri
Click to expand...
Click to collapse
Yes.
@Kamin4ri thanks :good:
i have one more if u give one minute.
in afh, have one PE with kernel problem, if i install this kernel in PE, work? will boot?
Thanks
Reserved!!
Waiting for reply
ilovepanda said:
i have one more if u give one minute.
in afh, have one PE with kernel problem, if i install this kernel in PE, work? will boot?
Thanks
Click to expand...
Click to collapse
waiting
ilovepanda said:
waiting
Click to expand...
Click to collapse
You mean there's a Pixel Experience ROM with a broken kernel, and if it'll work with my kernel. No, it won't. This kernel is designed for the stock ROM only. Plus, Oreo 8.1 custom roms are 64 bit, the stock one is 32 bit.
Custom kernel installed in stock 8.1 rom and working fine for me, thanks
samuelrafo said:
Custom kernel installed in stock 8.1 rom and working fine for me, thanks
Click to expand...
Click to collapse
The slow fingerprint wakeup and slow responsiveness can be solved using this kernel?
Hello @Kamin4ri . I'm interested in developing for montana . What branch to start from on your kernel tree for making the kernel for stock rom?
https://github.com/Kamin4ri/kernel_motorola_msm8937
Sent from my OnePlus 6 using XDA Labs.
rajatgupta1998 said:
Hello @Kamin4ri . I'm interested in developing for montana . What branch to start from on your kernel tree for making the kernel for stock rom?
https://github.com/Kamin4ri/kernel_motorola_msm8937
Sent from my OnePlus 6 using XDA Labs.
Click to expand...
Click to collapse
Hi there. You can use the stockmoto_oreo branch as it is pretty much ready. If you want to start clean, you can hard-reset the branch to this commit via "git reset --hard (commit hash)".
Does this kernel have any bugs?
@Kamin4ri can you generate/create 64bit config for montana? Of course we talk about oreo branch. Thanks in advance
wiktorek140 said:
@Kamin4ri can you generate/create 64bit config for montana? Of course we talk about oreo branch. Thanks in advance
Click to expand...
Click to collapse
I can try.
THE USER said:
Does this kernel have any bugs?
Click to expand...
Click to collapse
Well, I found no bugs. No difference in battery drain either. But consider this kernel still a test version.
I'm not an expert in kernels, but in my opinon, your tweaks should be on the end of file because it can be overwritten if its duplicated somewhere further in config file

Categories

Resources