Galaxy Alpha Kor Model Nougut Booted(Cm14.1) - Samsung Galaxy Alpha

Thanks to modpunk, Serenitys, and other developers, i builded cm14.1 for kor alpha and it works fine.

Great! Can you share it?

wow, it's stable for daily use?

I was looking for your thread since yesterday. any bugs? excited to try this out
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
josepmaria said:
Great! Can you share it?
Click to expand...
Click to collapse
you can find it on his androidfilehost profile, not sure if i'm allowed to share the link.

Did you face any bugs and does it support fingerprint unlock?

How did you do it?
Edit:
I'm going to try the latest build from androfilehost.
I hope the mic (in calling) is working and other basic functions. I have a G850k by the way.

Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F

kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.

click.here said:
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
Click to expand...
Click to collapse
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post

kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
kevkev0320 said:
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
Click to expand...
Click to collapse
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken

click.here said:
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
Click to expand...
Click to collapse
It was an unofficial build, but my system is now running,
many thanks <3

I can confirm that CM14.1 works with my Korean variant G850k but the mic problem still persist from previous CM13 . I hope this could be fix and more power. You should create a new thread when everything seems to be functional so that we could also inform others and have they're feedbacks

kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho

ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
do u understand dutch? can i send u a PM?

kevkev0320 said:
do u understand dutch? can i send u a PM?
Click to expand...
Click to collapse
yes I do, go ahead.

ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?

click.here said:
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
Click to expand...
Click to collapse
i tried, it won't go away. wasn't able to test anything tbh.

ArisRafaelli said:
i tried, it won't go away. wasn't able to test anything tbh.
Click to expand...
Click to collapse
You have to close it quickly and press next until you reach the home screen. After that just enable developer settings and it will go away.

@hdh980910 we wait for your answers.

Thanks i will go to flash cm14.1 on my alpha
Thanks i will go to flash cm14.1 on my alpha
many people in develoid cafe say kt alpha has connect out phenomenon. can you fix it?

Related

Android Marhsmallow (Cyanogenmod13) we had got UNOFFICIAL port.(d802)

here is a link !
https://www.androidfilehost.com/?fid=24269982086992417
who tested this rom , please leave a review
dowloading...
Edit: Boots correctly, but when the Welcome screen appears it reboot... How do I log that?
Just be careful when it comes to bootloaders etc
Not working on 802 stuck. Restart automatically when arrive to the first configuration screen.
Uechy said:
dowloading...
Edit: Boots correctly, but when the Welcome screen appears it reboot... How do I log that?
Click to expand...
Click to collapse
How did you install it? I did a clean install with lollipop base but it's stuck on CM logo for 5 minutes...
For the welcome screen, what gapps did you try? I read that on G4 and G3 OpenGApps had problems...
ferap said:
Not working on 802 stuck. Restart automatically when arrive to the first configuration screen.
Click to expand...
Click to collapse
i've same problem. :c
Callintz96 said:
How did you install it? I did a clean install with lollipop base but it's stuck on CM logo for 5 minutes...
For the welcome screen, what gapps did you try? I read that on G4 and G3 OpenGApps had problems...
Click to expand...
Click to collapse
I first try with DeltaDroidGapps. I see the stuck on the config scrren and i reinstall (always with all wipes) without any gapps. I search on dev/log to see if there is any log but nothing...
I have the lollipop Hybrid bootstacks and I was on exodus ROM
So it's better to wait a stable Build
Good to see the progress though, even if the majority of it doesn't work
---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------
Uechy said:
I first try with DeltaDroidGapps. I see the stuck on the config scrren and i reinstall (always with all wipes) without any gapps. I search on dev/log to see if there is any log but nothing...
I have the lollipop Hybrid bootstacks and I was on exodus ROM
Click to expand...
Click to collapse
I don't think it has to do with the bootloader then, cause then it would keep boot looping and never reach the configuration screen
Will work on HTC One M9 pw?
JuanKca said:
Will work on HTC One M9 pw?
Click to expand...
Click to collapse
Are you lost?
Finally good news! @JuanKca do not try this one on your M9!
Someone posted a fixed gapps package for 6.0 on the AICP Google+ page choose arm nano or pico depending on what apps you want.
It's not working - I got a reboot after welcome screen. With and without GApps. So it's probably bad build or it's not ready yet.
This is only for D802? I have a D801 (T-Mobile).
I'm gonna flash this on my vs980 wonder how well that'll go
zmankiller said:
I'm gonna flash this on my vs980 wonder how well that'll go
Click to expand...
Click to collapse
Please don't.
any one knows what bootstacks or bootloader should we flash before flashing this rom?
errikosd said:
Please don't.
Click to expand...
Click to collapse
Ha I didn't work but I edited the updater script and then I had the same problems the other people were having

[WIP] CyanogenMod Note 5 Rom + Kernel

Delete.
Congratulations man. Its great team to be in.
Device: G928C
Rom: CyanogenMod 13
Kernel: Mynogen
Congratulations ,well done job
Interesting , ?
Camera doesn't work.
Well done
Sent from my SM-N920T using XDA-Developers mobile app
lkiiii said:
Camera doesn't work.
Click to expand...
Click to collapse
What kernel did you flash with it?
Milly7 said:
What kernel did you flash with it?
Click to expand...
Click to collapse
Doesn't matter the camera just doesn't work yet
Sorry fellas. Just waiting for a friend who helps me with the building. Camera doesn't work but that is definitely on the list.
Thanks and sorry for the wait. Soon as I get the clear, I'll update OP.
Thank you so much, will report back as soon as done.
I'm happy I finally got to install, Nor audio calls neither Soft keys, text messages are working same as data, youtube, music, chrome, this a good beginning.
I installed the version 3 from the link given (S6 Edge +)
Thank you again.
Thank you so much for your Note 5 support
Updated OP guys.
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
rudeboy87 said:
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
Click to expand...
Click to collapse
Hello and thanks for trying.. So it eventually booted? Supesu can cause those kind of reboots while it sets up. . The cm was was made for Tmobile and international.. You could try to make sure apn is right and change your data connection. Like from 4g to 3g. Sometimes that triggers it. And what modem are you using?
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
rudeboy87 said:
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
Click to expand...
Click to collapse
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
LiL_Assassin said:
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
Click to expand...
Click to collapse
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
rudeboy87 said:
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
Click to expand...
Click to collapse
Try checking your apns and that they are correct. And changing.. If that doesn't work.. It might because of sprint device. Fingers crossed.
LiL_Assassin said:
Hello guys! After a few months I decided to look into building a CyanogenMod Kernel for our beloved Note 5.
It is very much a work in progress and any issues should be reported here, please make any backup efs back ups, and nandroids
Link to download cm13 by rainbow dash. Please download this first and then download this kernel... As that is what I am using as my daily driver and if you have random reboots there are ways to fix that. Just report what is making you reboot and I will help you as much as I can. It is still a very beta build!
http://forum.xda-developers.com/s6-edge-plus/orig-development/cyanogenmod-13-unofficial-t3384252
Camera doesn't work.
Some apps don't work unless you personally remove it's libs and stop them from generating. (eg chomp sms on message send)
Source code: https://drive.google.com/file/d/0B8Ps-jVB8IblU0xRWTZUdDlMZ3c/view?usp=docslist_api
Credits @Konsstantine34 @Rainbow_Dash @UpInTheAir (a huge mentor and alot of respect) @A Close friend. @RaymanFX for his first build of cm13 for our device.
[UPDATE!] Due to unforeseen things. I must upload it as a boot.img download it and flash it via twrp and make sure to be able to view Img. Update will soon follow with a proper zip. Please make a backup and report back, any issues. Camera still does not work! Report back with any other issues! Or reboots.
https://www.dropbox.com/sh/7f7979c3fiq4016/AAAPgzCwjArGBd67TV8b3wMHa?dl=0
Click to expand...
Click to collapse
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
CHE1 said:
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
Click to expand...
Click to collapse
In install menu select install image(right side) then select img then tick boot and swipe to install. When installing zips select install zip back again
Or install an app called flashify and select that img as kernel and flash

ResurrectionRemixOS 6.0.1

Presenting Resurrection Remix for Note 5.
WARNING: I'M NOT RESPONSIBLE FOR WHAT YOU DO TO YOUR DEVICE THE CHILD YOUR MOTHER GAVE BIRTH TO IS, AKA YOU
INTENDED ONLY FOR INTERNATIONAL MODELS C,I,G AND T
Source Code: Mod Edit: Link removed.
Telegram Group to keep updated
Mod Edit: Link removed.
Version 3 Download link: Mod Edit: Link removed.
How to install
READ THIS ALLL OF IT OR YOU WILL BRICK YOUR PHONE!
1)Wipe data system cache
2)flash this ROM!!!
3) install gapps recommended Dynamic Gapps, or pico open gapps
4)DELETE /system/lib/omx folder IN TWRP!!!!!
5)Reboot system!
6) Wait until the ROM boots NOW PAY ATTENTION!
7) REBOOT INTO RECOVERY AND FLASH A KERNEL FROM HERE: Mod Edit: Link removed. LOOK FOR IT!!
8)FLASH THE KERNEL AND LET THE ROM SIT FOR 2 minute's OR YOU WILL GET REBOOTS AND I WILL LAUGH AT YOU
9) Enjoy!!!!!
CHANGELOG:
V3
Blue screen is gone
Baseband issues are fixed IF YOU FOLLOW DIRECTIONS
Minor things you probably won't notice because you don't care
Post bugs you see or find
Removed S6e+
V2
Added T-Mobile and s6e+ support
V1
Initial release
Thanks to @LiL_Assassin, @muffinsmuffy, @Rainbow_Dash
And the whole MynogeN team for helping out even if they didn't want to THEY ARE THE REAL DEVS! EVEN YOU @UpInTheAir They are no cheap knock-offs and better than your 'recognized' devs
2nd reserve
Anyone tried yet can state the bugs ?
We who use the n910T congratulATE you.
we hope you can make one for us too
caniranges said:
We who use the n910T congratulATE you.
we hope you can make one for us too
Click to expand...
Click to collapse
There is already a build for Tmo just not made by me it is in the General section
Waleedaligomaa said:
Anyone tried yet can state the bugs ?
Click to expand...
Click to collapse
The more people who can test and provide logs the faster it'll progress through development. Hopefully soon
Good job thanks !
Link for t-mobile build?does this build also work with t-mobile variant???
215Aphillyated said:
Link for t-mobile build?does this build also work with t-mobile variant???
Click to expand...
Click to collapse
http://forum.xda-developers.com/note5/general/romtesting-t3380186
Atemtping to flash my build on Tmo, Dual sim, etc will make the ROM refuse to flash. This link is ONLY for Tmo
How do I install it?
help!!!
How do I install it? I install it without google apps, but restarting never turns on, it restarts.
I made a full wipe.
my model is N920G
diego1994 said:
help!!!
How do I install it? I install it without google apps, but restarting never turns on, it restarts.
I made a full wipe.
my model is N920G
Click to expand...
Click to collapse
If you wouldve read the OP it says to delete lib OMX files in TWRP located in /system
I edited the OP to seem more obvious
Taylor_Swift_Fan said:
If you wouldve read the OP it says to delete lib OMX files in TWRP located in /system
I edited the OP to seem more obvious
Click to expand...
Click to collapse
Ok thank you ... I just noticed
diego1994 said:
Ok thank you ... I just noticed
Click to expand...
Click to collapse
All cool bro report the bugs u see man , one guy can't do it alone
I have a blue screen after booting. If i lock the screen with the powerbutton i can see the normal android lockscreen for half a second.
echma said:
I have a blue screen after booting. If i lock the screen with the powerbutton i can see the normal android lockscreen for half a second.
Click to expand...
Click to collapse
Phone model please
Taylor_Swift_Fan said:
Phone model please
Click to expand...
Click to collapse
Oh sorry forgot that... N920C
Well well...after installing rom...it continues to reboot itself nd when i try to delete that file it wont let me to delete lib/omx also!!!!
P.S: using n920g nd clean flash!
Arpit Aggarwal said:
Well well...after installing rom...it continues to reboot itself nd when i try to delete that file it wont let me to delete lib/omx also!!!!
P.S: using n920g nd clean flash!
Click to expand...
Click to collapse
Dual booting? If so then its in /data/multiboot/system/lib/OMX
Also try an delelte lib64 omx
echma said:
Oh sorry forgot that... N920C
Click to expand...
Click to collapse
I have a fix for your issue, everything is working properly so with the blue thing covering pull down the QS then in the top right corner tap there it should take you to settings, there enable developers settings(if you don't know google) there enable the option "show surface updates"
Remember this is beta

Please Delete

Please Delete.
U99Dev said:
FAQS
Q: When are you updating this rom?
A: When samsung releases the next MAJOR/MONTHLY security patch update.
Click to expand...
Click to collapse
but why DEV? G92xIDVS3FQL5 base is released with december patch. So by your FAQ I assume an update is coming shortly after you just released this
Thanks in advance to iqbal sareem.
I was waiting for this kind of rom for my wife S6! Thank You!!!
noxxxious said:
but why dev? G92xidvs3fql5 base is released with december patch. So by your faq i assume an update is coming shortly after you just released this
thanks in advance to iqbal sareem.
Click to expand...
Click to collapse
i can't find it on sammobile, if you link me to it. I can drop an update asap
Thanks for the effort of baking this rom! Having a stock, rooted and debloated rom is always nice to have. You think u could drop the latest bootloader and modem too?
U99Dev said:
i can't find it on sammobile, if you link me to it. I can drop an update asap
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920I/INU/download/G920IDVS3FQL5/199606/
Samfirm downloader is way superior than any of those websites.
U99Dev said:
SAMSTOCK FOR THE S6
Q: Does this work with my device?
A: If its a G920F/W8/I OR 925F/W8/I. Yes. Yes it does. If not. Get out.
Hello DEV. Although it is stated that 925F is supported, in the website samstock is only available for flat. Would that file support for edge too. Thanks in advance.
Click to expand...
Click to collapse
noxxxious said:
https://www.sammobile.com/firmwares/galaxy-s6/sm-g920i/inu/download/g920idvs3fql5/199606/
samfirm downloader is way superior than any of those websites.
Click to expand...
Click to collapse
in progress
@U99Dev I'm on your latest Ressurection Remix ROM, but WhatsApp bugs are too annoying. Do I need something else besides wiping everything and flashing the zip for this ROM? Thanks
Also: Title says December Patch, Text says August Patch and on your site it says November Patch... which is it?
Alright, so this looks nice. Testing it out. Can't tell for sure if shutter sound button is included in the camera app, but I guess we'll find out.
Hello, I do not know if I understand correctly, I need to install the latest rom and only then install TWRP and install this rom ?? Do you understand me?
Great rom! I think the best actually for s6 g920f.
No bugs
Works like a charm. Very smooth and fast.
great job!
Br
---------- Post added at 05:58 AM ---------- Previous post was at 05:54 AM ----------
manix1960 said:
Hello, I do not know if I understand correctly, I need to install the latest rom and only then install TWRP and install this rom ?? Do you understand me?
Click to expand...
Click to collapse
1.Check for update if you can update so do it.
2. Install twrp
3. Fash this rom.
4. Enjoy your new fast System
Hearing myself when calling someone, any fix for this?
I have 2 questions, is the arona installer the mod date is incorrect. Also there are no carriers for the netherlands...
Aggro82 said:
Great rom! I think the best actually for s6 g920f.
No bugs
Works like a charm. Very smooth and fast.
great job!
Click to expand...
Click to collapse
lol, no ****. it's stock. duhh.
Nonononoki said:
Hearing myself when calling someone, any fix for this?
Click to expand...
Click to collapse
if u was selling drugs then u got some serious problems
ApexArizona said:
if u was selling drugs then u got some serious problems
Click to expand...
Click to collapse
Best comment I've seen in a long while ?
Problem with WiFi
Hello guys after installing this rom i noticed that my Samsung Galaxy S6 920F forgets WiFi passwords. When i turn off WiFi and then turn it back on, process is longer than usual and all WiFi networks which were previously remembered are now unknown, and device keeps asking me for a password. Anyone had same issue?
Edit: I am noticing now after installing this rom my model number is no longer SM-G920F, it is SM-G920I, how is this possible?
maretomic said:
Hello guys after installing this rom i noticed that my Samsung Galaxy S6 920F forgets WiFi passwords. When i turn off WiFi and then turn it back on, process is longer than usual and all WiFi networks which were previously remembered are now unknown, and device keeps asking me for a password. Anyone had same issue?
Click to expand...
Click to collapse
Could try note fan edition ROM. Has some of these things fixed.
meboy said:
Could try note fan edition ROM. Has some of these things fixed.
Click to expand...
Click to collapse
I would be more than thankful if you could pass me link to that ROM.

Android Pie and Oreo for z ultra!! But...

I found oreo and pie roms for our ultra on androidfilehost but after flashing I am not able to get the touch working. I think its a recovery issue, but the twrp-3.1.1 uploaded by zawzaw doesn't mount my system read/write, so no luck. Can anyone test the roms please? Also is there newer version of twrp available for our device?
Here is the link
https://androidfilehost.com/?w=search&s=togari
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
billyliem said:
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
Click to expand...
Click to collapse
Have you tried 3.0.2-0? That has been working for me on my C6833.
Yes, it is not working for me
Hello does the rom working? I cant install it because i cant have TWRP working in my device
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Rom tester
Hello
First of all thank you for your work, we really appreciate it, i have a suggestion, please make a Telegram group so we can join and test the rom and tell you the bugs and issues, thank you again
Which Kernel to use with this Rom?
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
the custom rom of the android pie will be continued ?, and I think you could do a post of your roms I think it would give a good revival in this forum and release the source code of the roms and the kernel
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
I would love to at least have a custom Android rom oreo stable and functional but by the way it will take a little longer for this to happen
...
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Jaime albino said:
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
Click to expand...
Click to collapse
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Click to expand...
Click to collapse
Same Here , flashed the fix , and no touchscreen response after boot
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no
work even in the recovery.
Click to expand...
Click to collapse
pvillasuso said:
Same Here , flashed the fix , and no touchscreen response after boot
Click to expand...
Click to collapse
i wasn't using those roms anymore because in the oreo version the camera doesn't work and mobile network too, the
9.0 version didn't work either, it's always in bootloop, but i flashed the oreo version again and the touch fix
using philz recovery and twrp and the touch worked like a charm as i said you just need to wait a few seconds, the
purpose of this fix is to fix the touch problem within the rom and not in the recovery, if your recovery doesn't
have touch is not something that this fix or i can do sorry. But i can guarantee that this fix works in this oreo
version because i tested it myself after a clean flash, please try again and tell me if it worked for you.
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
install error 7 in TWRP?
raschad said:
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
Click to expand...
Click to collapse
phhuang said:
install error 7 in TWRP?
Click to expand...
Click to collapse
Yep same to me.
Malle355 said:
Yep same to me.
Click to expand...
Click to collapse
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
raschad said:
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
Click to expand...
Click to collapse
Its booting but touch not working. Tried to flash the touch_fix.zip but not working.
someone needs to compile a new twrp recovery for us, xperia z ultra orphans

Categories

Resources