Hello!
Before proceeding. It is absolutely necessary for you to be on a stable TWRP build (currently, RC8, 3.0.2-0, and 3.0.2-1). Also, you must have already have had decrypted your ENTIRE phone. If your phone bootloops into TWRP, you probably didn't decrypt, and/or didn't flash no-verity properly, or it could also be that you are on an old TWRP build.
Here we have the base NRD90M ROM from LG.
I have added a few mods to it.
FEATURES
**Multi-user working!
**This ROM is deODEXd
**Has init.d support
**Modified build.prop for better performance and hardware utility
**Removed bloatware (including that HORRID Lookout)
**Force encrypt disabled
**New kernel built-in.
**Based off 3.18.31 from @jcadduono source (thanks so much)!
**Added in the blu_active governor and set as default (via post_boot)
**No-op scheduler is default, and recommended
**Updated build.prop for better Hotspot support.
**More build.prop tweaks
**init.d support baked into the kernel
**Battery life should be noticeably improved, with no loss of performance (maybe even a bit faster).
**No need to wipe anything. System and caches are automatically wiped.
**Updated to SuperSU 2.78 SR4
**Updated boot and shutdown animation to the Android 7 default (thanks @freeza )
**More bloat removed
** Now includes more performance tweaks.
**Full Busybox support included!
**Fixed updater-script and binary
**Removed Sony Bravia/Xperia Engine
**Zen_Decision HotPlug enabled by default. (This will improve battery life, especially when your screen is off)
**TCP Congestion controller set to Westwood+ (improved download speeds)
**KCAL Color Control! Plus the Color Control app! Thanks to @savoca for KCAL and the app! Thanks to @freeza for the updated KCAL.c source file
**IO Stats for scheduler turned off
**IO Read ahead set to 2048kb
**Added init.d scripts to optimize your phone, and keep it fast over time.
**VPN is fixed!
**Gallery locked files are fixed!
**Bluetooth and FM should be fixed!
**No hotspot or ADB debug issues!
**More things I can't remember.
Kernel built on the Linaro 6.1.1 x86_x64 toolchain
Latest: v5.1 combined with v5.5
v5.5 is intended only for people already on v5.1. It will not wipe anything, and your phone will not need to do its initial setup. 5.5 is an update only! You must first flash 5.1, then 5.5. You can tell TWRP to flash files in sequence, so it's no hassle. ZIP no longer checks your device, so be sure that you are flashing for the model the sticker on the phone says that it is.
Here are the changes for v5.5:
Removed boot state verification. This allows your device to pass CTS on SafetyNet. That means that you might be able to use a root hide program, or maybe full unroot within SuperSU, and perhaps apps like Android Pay and Pokemon GO will work. They will never work if root is detected, no matter what.
Used more independent defconfig lines, hopefully static will go away... I highly doubt it, might even cause a no-boot issue. If it does, just tell me and I'll fix it up.
The main changes here are even more battery saving
**some voltage control preparations (still not active)
**added a DNS resolver module to maybe help some people with hotspot.
**Bluetooth and FM should work even better than before (hopefully not worse lol)
** C-states are made aware in the kernel, so sleeping should be more effective, while waking up should be more snappy.
More things. Do it!
Here are the changes for v5:
**ViPER4Android is preinstalled
**Kernel updates to latest sources (no changes other than updates)
**Included Titanium Backup pre-installed. I highly recommend getting the license, this program rocks, and never has ads. With a license you can do batch functions, and theres more features.
**Included Kernel Adiutor to prepare future kernel updates (CPU/GPU under+over clocking later on). You can also use this to tweak I/O settings, governor, screen color). Everything should run pretty good as it is, but what I do, is set read_head in I/O to 2048, and disable I/O Stats. I also set it on boot. I do not recommend modifying any CPU or GPU frequencies since there are no changes in the kernel to allow for that.
**Updated to latest Super SU
If the ROM won't flash because it says you have the wrong device
This is likely due to the conversion thing you guys had to do to root. I don't have the AT&T device and I don't know about that conversion thing. To bypass it, open the ZIP, go into META-INF/com/google/android and delete only the file called updater-script. Replaced it with this one
No need to wipe anything. If you are on stock ROM, ODEXd or deODEXd, or any other NRD90M ROM, you don't need to wipe, the ZIP will take care of everything for you. /data will not be wiped, so all your old apps and settings will be there. Internal storage is of course untouched.
For anyone interested in my color options, they are:
My new settings are:
All 3 colors at 256
Saturation 68
Value 129
Contrast 127
Know that I love deep, rich, vibrant colors. Also, changing colors will not change effects on pictures taken! This is post-processing. Your phone's screen is what changes, not the files that you create.
Note: Adding saturation (vibrance) will always give some sort of color banding -especially since KCAL is post-processing. You can minimize color banding by ever-so-slightly reducing gamma (read as "Value" in the Color Control app), and by ever-so-slightly fine-tuning Contrast. The value changes would be minimal, and the color banding will only be reduced ever-so-slightly, but this is just how it is. Nonetheless, the device looks friggin amazing with the color options set.
Having issues? Read below.
I need you guys to hear me out on this...
I do not have this phone, I cannot do any sort of testing, nor do I keep up with your rooting method.
That said, I cannot fix things that were broken due to the bootloader (such as Static Boot), so if WiFi calling did not work for you after flashing the custom bootloader, please don't ask if it is fixed... I do not know how to fix it. When/if it is fixed, I will let you guys know that it is fixed and who to thank for said fix.
Additionally, I need you to tell me things that do not work. I might not be able to get to all messages, or questions, so if you see that I did not reply, ask again and again until I do... I will reply and answer (obviously don't spam). Be sure to quote me, mention me, or message me. I do not check-in with these threads, just the H918 thread. If you do not send me a notice, I will not know that my attention is needed.
What issues that are ROM-related, not user-related can you report? You will know it is user-related if you modified anything in the phone/ROM.
If you flashed a different kernel, I cannot help you; flash back to the NSS kernel, and re-test.
If you are unsure about an issue, do a clean flash (in TWRP: Wipe-->Advanced-->select Dalvik, System, Data, and Cache (DO NOT SELECT INTERNAL STORAGE OR SDCARD)-->Swipe to wipe-->Install ROM-->boot phone, do not change or install anything. Retry your issue, if it is fixed, great. If it persists, go into your SD Card, and Internal Storage, remove the folders called "Android" and ".android_secure", reboot and try again. Still doesn't work? Mention me and post it here.
Remember, you can backup your USER apps in Titanium Backup (do NOT backup system apps, or restore system apps/system data).
You can also backup your existing setup and apps in TWRP so you can flash back to your original setup. This is good if you did a clean flash, and your problem is still there, you can restore your backup and be like nothing was changed.
Thanks @zhuhang for V4A!
Major thanks to @Chainfire for creating SuperSU
Major thanks to @jcadduono for the root exploit, AND for the TWRP image(s), AND for inspiring me to learn to do it. Also, he supplied the stock System.img, boot.img, and sources for a custom kernel!/RealMVP
Viper4Android is included! To enable, run the app, and configure how you please!
More to come (as I learn to do it)
Please make any requests. If it is not too difficult, I will learn how to, and add it to the MODDED ROM!
Debloat list
Removed from /system/
system/app/CloudPrint*
system/app/Drive*
system/app/DriveActivator*
system/app/EditorsDocs*
system/app/Gmail2*
system/app/Hangouts*
system/app/Music2*
system/app/talkback*
system/app/Videos*
system/app/YouTube*
system/etc/recovery-resource.dat*
system/priv-app/LGEmail*
system/priv-app/LGTasksProvider*
system/recovery-from-boot.p*
system/app/AndroidPay*
system/priv-app/facebook-installer*
system/priv-app/GoogleFeedback*
system/app/LGAccount*
system/app/LGAirDrive*
system/priv-app/LGAirDriveSetting*
system/priv-app/LGBackup*
system/app/LGBackupLauncher*
system/priv-app/LGExchange*
system/app/LGFOTA*
system/app/LGMusicShare*
system/priv-app/LGPartnerBookmarksProvider*
system/app/LGSpringCleaning*
system/priv-app/Lookout*
system/priv-app/TMO_MyAccount*
system/priv-app/LGApplicationManager*
system/vendor/overlay/com.lge.friendsmanager*
system/vendor/app/facebook-appmanager*
system/priv-app/LGPCSuiteService*
system/priv-app/PromoHelper*
system/priv-app/LGQHelp*
system/priv-app/LGQHelpService*
system/priv-app/NameID*
system/priv-app/LGUpdateCenter*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.android.providers.partnerbookmarks*
system/vendor/overlay/com.lge.appbox.client*
system/vendor/overlay/com.lge.exchange*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.lge.bnr*
system/etc/amzn.mshop.properties
system/vendor/overlay/com.lge.lgworld*
system/vendor/overlay/com.lge.mlt*
system/vendor/overlay/com.lge.lifetracker*
system/priv-app/AdaptClient*
system/priv-app/ATT_ProtectPlus*
system/priv-app/ATT_DeviceHelp*
system/priv-app/ATT_Lookout*
system/priv-app/ATT_SmartLimits*
Source for kernel is at (need to update)https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Thanks to @jcadduono for the amazing original source he made for us ( you can find it here : https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Everything is still working great! Thanks again @Tilde88. Those color settings are awesome, too. Much better than stock!
Glad to see this! Trying now..
UPDATE: Runs pretty smooth. Thanks again!
Yeah it worked perfectly now after replacing the updater-script (correctly). Thanks for doing this! My only request is just on adding the advanced power menu options such as reboot to recovery/bootloader Other than that - its perfect.
Twisted
twistedvip said:
Yeah it worked perfectly now after replacing the updater-script (correctly). Thanks for doing this! My only request is just on adding the advanced power menu options such as reboot to recovery/bootloader Other than that - its perfect.
Twisted
Click to expand...
Click to collapse
I second this! Advanced power menu with recovery/bootloader reboot would be great. I use ROM Toolbox Pro to boot into recovery as it is now.
Also, would like to put GApps Pico with the ability to add any extra Google features as necessary. I pretty much just use the play store and some services. I like minimal Google services and apps on my phone. For example, I use Waze instead of Google Maps, and I use Gmail, but not the app. I use a different email app but I cannot delete Maps or Gmail since they are system apps, just disable them and their services. I don't use OK Google, Google Now, Hangouts, etc... There are a lot more examples like this.
nikktrikk said:
I second this! Advanced power menu with recovery/bootloader reboot would be great. I use ROM Toolbox Pro to boot into recovery as it is now.
Also, would like to put GApps Pico with the ability to add any extra Google features as necessary. I pretty much just use the play store and some services. I like minimal Google services and apps on my phone. For example, I use Waze instead of Google Maps, and I use Gmail, but not the app. I use a different email app but I cannot delete Maps or Gmail since they are system apps, just disable them and their services. I don't use OK Google, Google Now, Hangouts, etc... There are a lot more examples like this.
Click to expand...
Click to collapse
You can delete system apps by using a program such as Titanium Backup. You can also backup your apps, and restore them on other ROMs. Don't backup system apps, just user apps.
I recommend the Pro version of Titanium; I bought it years ago, and still use it today. One of, if not the actual best, backup/restore program.
With pro you can do batch files, instead of 1by1. Also good for games to save their current state.
Tilde88 said:
You can delete system apps by using a program such as Titanium Backup. You can also backup your apps, and restore them on other ROMs. Don't backup system apps, just user apps.
I recommend the Pro version of Titanium; I bought it years ago, and still use it today. One of, if not the actual best, backup/restore program.
With pro you can do batch files, instead of 1by1. Also good for games to save their current state.
Click to expand...
Click to collapse
Titanium Backup is great! I have the pro version as well and use it constantly. I guess I'm not really concerned with the apps taking up space, rather just starting with the bare minimum of necessary things and adding what is needed afterward. But I usually freeze the apps just to avoid any possible issues with deleting. Another app that is just as great is ROM Toolbox Pro. Their App Manager and Auto Start Manager have advanced freeze functions that show you every single activity, receiver, and service attached to each app and gives you full functionality over them.
@nikktrikk @twistedvip or anyone else that wants to test.
@me2151 has given me a new defconfig for the kernel which might fix the static boot thing. Can anyone try it out for me please? It can be found here. Let me know how it goes. Thanks.
Tilde88 said:
@nikktrikk @twistedvip or anyone else that wants to test.
@me2151 has given me a new defconfig for the kernel which might fix the static boot thing. Can anyone try it out for me please? It can be found here. Let me know how it goes. Thanks.
Click to expand...
Click to collapse
Just flashed on my H910. Unfortunately, it still gave me the static screen upon reboot.
EDIT: It also seems to have made the phone very laggy compared to your original custom ROM.
Twisted
:/
twistedvip said:
Just flashed on my H910. Unfortunately, it still gave me the static screen upon reboot.
EDIT: It also seems to have made the phone very laggy compared to your original custom ROM.
Twisted
Click to expand...
Click to collapse
You can flash the boot.img from the ROM you already have downloaded. Just extract it out of the .ZIP, go to twrp, and flash the image as Boot
Tilde88 said:
You can flash the boot.img from the ROM you already have downloaded. Just extract it out of the .ZIP, go to twrp, and flash the image as Boot
Click to expand...
Click to collapse
Thanks, I just flashed back to your original custom kernel. Let me know if there's anything else y'all might come up with and want me to test out. Always willing to help out.
Twisted
Tilde88 said:
You can flash the boot.img from the ROM you already have downloaded. Just extract it out of the .ZIP, go to twrp, and flash the image as Boot
Click to expand...
Click to collapse
Everything is still running great. Much better battery life than stock! Just wanted to let you know, the only thing I have found that is missing is the Screen Capture feature. On the stock AT&T ROM, it is included in the pull down menu from the top, but it is not here at all in the custom ROM. If you navigate to Settings>Display>Home touch buttons>Button combinations, you can actually see the capture icon used as an example in the help section in the bottom half of the screen showing how to rearrange the buttons. The center button shows the capture button icon, but that button is not an available button to choose from when actually rearranging the Home touch buttons.
nikktrikk said:
Everything is still running great. Much better battery life than stock! Just wanted to let you know, the only thing I have found that is missing is the Screen Capture feature. On the stock AT&T ROM, it is included in the pull down menu from the top, but it is not here at all in the custom ROM. If you navigate to Settings>Display>Home touch buttons>Button combinations, you can actually see the capture icon used as an example in the help section in the bottom half of the screen showing how to rearrange the buttons. The center button shows the capture button icon, but that button is not an available button to choose from when actually rearranging the Home touch buttons.
Click to expand...
Click to collapse
Screen capture can be done by pressing Vol Down and Power at the same time in any screen.
*click*
Tilde88 said:
Screen capture can be done by pressing Vol Down and Power at the same time in any screen.
*click*
Click to expand...
Click to collapse
I have no problem doing a screen capture, I just wanted to let you know for the sake of knowing that the capture button icon is not included. Just so you have a comprehensive list of features no matter how minor they might be
Tilde88 said:
Screen capture can be done by pressing Vol Down and Power at the same time in any screen.
*click*
Click to expand...
Click to collapse
Its also on the second screen and is very handy and much faster. I know for me my case is of some crap rubber amd hard to hit both at the same time
Got the error that I'm not a 910. Tried swapping the update script to bypass the check, but now get an error that the update binary is missing while trying to flash it. Went to check and it is still the in the zip however. Did I miss something obvious?
Sent from my Pixel using Tapatalk
streetpounder said:
Got the error that I'm not a 910. Tried swapping the update script to bypass the check, but now get an error that the update binary is missing while trying to flash it. Went to check and it is still the in the zip however. Did I miss something obvious?
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
Sounds like you broke the ZIP. Don't modify it on your phone. copy the ZIP to your PC (don't open it from internal storage). Well, since it's broken now, download it again. When it's done downloading, open the ZIP on your PC, remove only the updater-script file, and once you have only the update-binary, re-add the updater-script.
I made a copy before I modded it. I'll try your approach and give it another go. Thanks!
Sent from my Pixel using Tapatalk
Still getting bluetooth shutting off randomly.
I flashed this using no wipe, as in instructions...on Dirty Santa AT&T rooted phone. Bluetooth STILL is completely annoying and disconnects whenever it feels like it. Even Bluetooth Auto Connect and Bluetooth Keep Alive are of no use as fixes. Any ideas??? Should I wipe and just flash your rom to clear up any bugs??
[EDIT] I JUST WIPED AND FLASHED...WILL POST RESULTS!!!!!
Thanks for your awesome work and thank you for your time!!!!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Current Events
Dodo released! This means this ROM is now extinct. Sorry! If links below fail, try this one!
OTA is in Beta. Will be included in CM 13 release once both are stable. OTA will be available before full-sized versions due to the testing process (updates are tested first).
SnapChat will not work without some help. This is entirely SnapChat's fault for trying to control your device. Please read this thread before flashing and how you can make it work. Or just open Xposed installer, install Snapprefs and reboot.
Introduction
Welcome to the fastest and most stable ROM for your OnePlus. This thread is mainly a support thread for Jgcaap's awesome work, allowing him to spend more time working on "M" and less time answering questions. His latest builds will be tested by me, hand selected for stability, and the best of the crop will be repackaged, enhanced, and placed here. If you are new to this ROM, check the screen shots for benchmark results and battery life screenshots. Be amazed, then download the ROM and be even more amazed! Smooth as glass and flows like water! As one person has said, "Disgustingly Fast!"
Please read this entire post! Check back often for updates. Also, current jgcaap users will get additional information and tips that can be useful. Check out all the links! And if you want to try some Bacon wrapped Marshmallow, click the bent arrow in the Announcement's line.
Wildlife
Each ROM will be named by an animal, starting at A for Aardvark. A picture of the animal will be placed here so you can see at a glance which release is current. The original jgcaap ROMs often have multiple releases in a single day, and every country has a different date format, so the animal names will allow us to represent specific "official" releases with memorable names.
Release (CM 12.1 - jgcaap 11/30): (click image to update)
Downloads | Other Stuff | Links
Features & Changes
The ROM gets repackaged so that new users don't have to go about tracking down which files they need and which order to flash things. The firmware is included and everything is set and ready to go. For legal reasons, just add your own GApps and go. This ROM currently has the following feature's prepackaged and already included with the ROM ...
SuperSU (pre roooted)
Xposed (special jgcaap version)
Moab Ad Blocker
--- ZooKeeper can configure this!
ColorOS Camera
--- with manual focus option
Viper (Audio Eargasm)
Dolby ATMOS! (Dodo+)
Send Reduced (send small pics)
CatLog (for bug reports)
Show On Lockscreen (wallpaper)
OmniSwitcher (optional)
Init.d Support (Badger+)
Governor: blu-active (Badger+)
Low call volume fix
OTA Support (coming soon!)
Support, Questions, Feature Requests and Bugs
Please report all bugs for CM12.1/Lollipop based Jgcaap ROMs to this thread. Even if you didn't download one of the Wildlife pre-packaged ROM sets! Feel free to ask questions. This thread will have the same warm inviting atmosphere that jgcaap's development thread has always had. Newb-friendly and all are welcome!
Getting Started
There will be two ROM images available. The update packages will be designed with a smaller download size with only the files that have actually been changed. The installer will not remove things you have added nor re-install programs you have removed. If you are already using a WildLife ROM, use the Update packages to upgrade. This does not apply to full versions. The full versions should be clean flashed.
The next post will have Step-by-Step instructions telling you exactly what you need to do and how to go about flashing your phone or upgrading. The post after that will have all the tips and tricks for maximum tweaker power. Finally, we'll have instructions on how to rescue your phone when something goes wrong.
Sponsored by Eddon Systems
Additional Downloads at Eddon Systems Download Page
XDA:DevDB Information
Wildlife Android, ROM for the OnePlus One
Contributors
uudruid74, jgcaap, purerawenergy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: INCLUDED
Source Code: Jgcaap's Github Repo
Based On: CyanogenMod 12.1
Version Information
Status: Stable
Current Stable Version: See Post
Stable Release Date: 2015-11-16
Created 2015-11-16
Last Updated 2015-12-11
Flashing WildLife
Flashing Instructions - Full ROM
Step 1 - Backup
If you don't have a backup program, you can grab a really fast and free one, Backup+. XDA Forum | My Mirror - Direct Download. Be sure you keep the APK on your Internal Storage so you can install it easily and restore the rest of your apps. Also, I strongly recommend you copy your internal storage (or at least the backup directory) onto a PC, a harddrive, a flash drive, or cloud storage such as Google Drive. Get it off your phone and make it safe.
Step 2 - Boot into Recovery
Even if your reboot menu doesn't have a Recovery option, you can always just hold down the Volume Down button when your phone boots and you're good. I recommend Philz Recovery from this XDA thread or you can download the exact ZIP I use.
Step 3 - Wipe Carefully
This step is what is known as a "clean flash". Do not perform this step if you are flashing an upgrade or addition. If this is the first time you've flashed this ROM, you want the full version and you want to do it cleanly. Failure to clean flash leads to odd problems. For example, Agent stopped reading my calendar, or my Camera plugins would start to disappear.
You do not want to do a Factory wipe or anything like that or you'll lose all your data. Do not format /data. Here's where it gets confusing. Many recovery systems treat /data and Internal Storage as if they were separate partitions, but they are not. Your internal storage is on the same partition as /data. If you are from Windows, image your /system is your C: drive, and /data (where your apps are at) and your internal storage are both on D:. Your recovery has a specific wipe designed to safely wipe /data without wiping out your internal storage by erase directories individually, yet automatically.
Philz makes this simple and direct. Select Wipe and Format Options, then select Clean to Install a New ROM. Confirm the wipe, and you are ready to go.
Step 4 - Flash the ZIP
This is pretty easy. Select the option to flash it, find it on your device, and away it goes. If you downloaded the file to your PC (or wiped your internal storage and now have no files on your phone), you can use the "sideload" option you see in the menu. Just plug in a USB cable and type: adb sideload Aardvark.zip This does require that you have adb drivers set up on your PC, but you needed that to unlock your bootloader, right? More tips like this in a later post!
Step 5 - Flash your Gapps
The most important part of Gapps is making sure its for Lollipop. The more up to date, the better. You should download the smallest GApps that fits your needs, just so you don't have to download so much. You can specifically control which Gapps are installed with a config file. Just drop the gapps-config.txt into the same directory as your gapps ZIP file. This file can even delete crufty Cyanogen apps that you don't need or want (you have better ones from Play store right?) and reduce bloat considerably.
About the Gapps Config | OpenGapps is the recommended Gapps package | Newer Sources for Gapps | My gapps-config.txt ... note: you might not want to use my config unless you want almost all your Cyanogen apps to go away. When the system comes up, you won't have a file manager to install Backup+. I install it with "adb install BackupPlus.apk" or if its on the phone, you can log in with adb shell and then install with pm install $PWD/BackupPlus.apk
TIP: If you have Chrome installed from Gapps, you can open it and type "file:///sdcard" in the URL window and then select your Backup+ or Titanium Backup APK to install it. Be sure you have "Install from unknown sources" turned on. Now you can restore your good File Manager (like FX File Manager mentioned in Post #5) from your Backup and don't need Cyanogen's!
NOTE: If you have trouble with OpenGapps, then you can try my stable mirror or SlimGapps (which is now recommended by jgcaap, but I've not tried it myself yet ... but expect it to be the new recommended after I run it through the paces).
Step 6 - Reboot your Phone
After flashing, the first time your phone comes up, its going to optimize itself and you should expect it to take awhile. Don't panic, and wait a few minutes. I refuse the CyanogenMod account (you already have a Google one, and Cyanogen doesn't offer anything extra and defintely do NOT send bug reports or analytics to Cyanogen!). I also go into Settings, About Phone, tap the Build Number like a mad monkey to turn on Developer options, and from there, I enable the Reboot Menu, Fast Boot, Cut the animations down to below 0.5, and turn on ADB since I'll be installing Backup+ over ADB.
Step 7 - Restore your Backup
Use your file manager (or ADB) to install your backup program and then restore the rest of the apps from your backup. I keep my Wifi off so that Google Play won't freak out and try upgrading stuff while its restoring. Do not use ROM Settings Backups to try to move settings from one ROM to another (thats what Update files are for). You can usually restore your Desktop with Backup+ by restoring the data for Trebuchet if you formerly used another Cyanogen release. The next reboot I go to Play Store and upgrade any apps that need it.
Step 8 - Final Config / Updates
I haven't found a perfect way to back up Trebuchet and my desktop ... but Backup+'s system backup tool (paid feature) can be used to restore the Trebuchet data, which gets everything but the widgets. If you use OmniSwitcher, just turn it on. If you use Xposed, it should already be working and active. If you don't use Xposed, jgcaap's version won't slow down your phone or cause glitches. However, if you really don't want it on your phone, you can flash this to deinstall it and can reinstall it without flashing the whole ROM by flashing this file.
MaxxAudio is gone ... use Viper. Set it to Super Audio Quality and reboot when it says to (Aardvark only, no reboot required for Badger and above). More about Viper here. I strongly recommend reading as there are a lot of optional add-ons (convolvers and such for emulating other tones and systems) but many of these will use significant battery power. I don't even use it for the built-in speaker. You can control it per output device, and have different profiles, such as if you have multiple pairs of headphones or different USB Audio devices.
Please Donate to the developers when you use an app. It is only through your support that you get to use high quality apps. This ROM has ads blocked, so developers of free apps will go poor and hungry since they won't be getting any revenue from your ad clicks!
Flashing Instructions - Updates
An update is a slimmed down version without any apps (unless they've been updated), no firmware, no media files, etc. And it avoids flashing over files you may have changed or deinstalled, like the hosts file or various bundled apps. It doesn't touch your settings, you don't need to wipe anything, and it just upgrades in-place. All you need to do is Steps 2 and 4 and 6!! Updates are clearly labelled. Never wipe your phone when installing an update! No OTA yet.
Tweaking
Tweaking, Trimming and Theming
Kernel
There is a UKM for jgcaap's kernel which is in the download area. You'll need Synapse from Play store to use it. I don't recommend tweaking the kernel, but if you want the option it is there. Just download the ZIP, flash it in recovery, and you can start tweaking some kernel parameters! Personally, I use 3C Android Tuner (see below) because it can tune more than just the kernel, but you might find something UKM does that 3C doesn't. As as Badger, you can use the init.d script option for restoring settings imposed by kernel tweakers.,
Governor
Your governor controlls when your CPU is at full blast, when it throttles down, and how quickly it changes and by how much. This will affect battery and performance (and "lag") considerably. As of Badger, the default CPU governor is "blu_active". You won't need to ever change to "Performance" mode to squeeze out more power, its runs even more fluid than before, and battery life is as good as ever. There are a couple ways to select the governor. The one I use is 3C (below). The only source of lag is memory. If you run out and Android has to swap stuff out, there will be a noticeable delay. If you rarely get lag, but get it rather severely, I bet its when you have 20 apps open and a million installed with their own background services and content providers! Suddenly the OOM (Out Of Memory) killer attacks and your phone stops for a second or two. I'm testing a possible solution, but everyone's phone is different.
CPU Temp
How hot does your CPU get? If you run Cardboard like me, you might be concerned. If you have to switch to an app to find out, then your CPU will have already cooled by the time you see the temp. This CPUTemp App displays an overlay anywhere you want that will show you your exact temperature. It can also save the data and give you in-depth graphs of CPU speed, load, and temperature. Alternately, you can just use this Xposed module to always show the CPU temperature in your status bar. (WARNING: I've not tested this Xposed module myself).
Xposed
Wildlife already has Xposed installed. If you have heard of requirements that your ROM must be deodexed or odex or and that you will have compatibility issues or slowdown, the current news is that the latest Xposed works on odexed ROMs and jgcaap has personally blessed some modifications to increase speed and compatibility with this ROM, and final result is packed into Wildlife. However, until you install some Xposed modules, it lies dormant. Fire up the Xposed Installer and you can start searching for tools to tweak how your phone looks, how it acts, how it sounds, and tweak some more battery life. Once you install a module, activate it, and then reboot.
Please be aware that not all Xposed modules are compatible with Lollipop and not all modules are created equal. I have heard mixed reports on GravityBox in particular. If for some reason your phone gets horribly confused and won't boot because of some Xposed module you have installed, or if you just hate the idea of having Xposed and want it gone. There is a solution! Flash this Xposed Uninstaller and if you flash this and want Xposed to come back, just Flash Jgcaap's modified v75 Xposed framework.
Ones I use are the 3C Toolbox helper, Clarity (makes your contacts in better definition), No Device Check (privacy), RootCloak (hides root), Smart Network (auto switches between 3G and LTE to conserve battery).
3C ToolBox
If you like tweaking, this toolbox has a little bit of everything. You can view logs, including last kernel boot log (the one that ran before you crashed), open a terminal, set a firewall, change CPU and GPU governors, disable services, remove programs from the start-up list, change network congestion control ... the list goes on and on!
Here is the XDA thread (with download links) for this tweaker's toolbox.
Battery Extensions
The first step to checking battery problems is Wakelock Detector and Better Battery Stats. These tools will tell you where your juice is going. If an app is holding a wakelock, ditch the app or alert the developer. Once you see what is chewing the most battery you can launch an assault on it with these tools:
Xposed Modules - Again, I'm going to defer to an expert source, @V7 's Extreme Battery Life Thread for all the goodies on PowerNap, Greenify, Amplify, and all the others that you've heard about.
Underclocking - I simply do NOT recommend this. Why? Well I checked Better Battery Stats! And my CPU had only been at full speed for 6% of the time. The next speed was under 2Ghz. So, is it worth slowing down your phone by 20% in order to achieve an overall savings of about 1.2% battery? The reason for this is that your system has what's called a governor that predicts how much CPU you need at any given moment and adjusts accordingly. This means you only use max CPU when you need it! If you underclock, then you are slowing down your phone when you need it most. You might even waste more battery because you'll be keeping your screen on longer waiting for your phone to finish!
Undervolting - I don't like this idea either. Basically, the voltage is how much strength it takes to open the transistor gates, like little doors. When your CPU gets busy, the voltage can fluctuate by small amounts, and if you undervolt your CPU, you can occasionally get a gate that doesn't open, and your get a CPU doing really crazy things and some app with crash or your whole system will crash. Generally, higher speeds require higher voltage to keep your CPU stable, and less voltage at lower speeds. Imagine trying to open and shut a door really fast ... you'll need more force than just shutting the door gently.
Can I get 9hrs SOT? - Sure! See the screen shot, but here's the secret. WASTE battery power! If you have a flip-case, remove it. Take your screen timer and set it REALLY high and don't turn off your screen. Let it BURN! This will ensure that your screen is on for a really long time. Cheating? Well, yes and no. The point is that someone who is chatting on their phone over Wifi and rarely touches it, but leave the screen on while doing so will get great SOT. The guy streaming Bluetooth audio all day long and has their phone tethered to use LTE internet with a low signal will waste tons of battery and may not have the screen on at all. The 9hr screen on time was done while doing all the above, plus some web browsing using ....
Ultimate Browser - This browser is said to use less battery than Chrome and others. You can check it out and see for yourself on The Ultimate Browser XDA thread.
Themes
Many people ask about the themes pictured in the screenshots. This is the Deep Darkness Overhauled Theme but with the thinner fonts from Cosmos CM12. Just select which parts of each theme you like before clicking the Update button.
I'm now using an Add-On package for this theme that gives icons that aren't so dark. It has a cool font, too, but I don't know if I like the Cosmos or Deep Darkness Add-On better. I'm also using a compromise between the 400 DPI (real) and 480 DPI (stock) of 440 DPI. This still gives me 5 icons wide on the home screens without throwing off apps that expect stock DPI (much).
Rescuing Your OnePlus From Disaster
Rescuing Your OnePlus From Disaster
I sure hope you never need any of this information! The following links are from Heisenberg's OnePlus One thread
Device Recovery/Unbrick Tools
[TOOL] One-Click Backup & Restore EFS on OnePlus One
[TOOL] OnePlusRecovery Tool | Restore Stock (CM11S) | Fix Bricks | ETC
[TOOL] OnePlus One Return To Stock - Automated!
[GUIDE] [UNBRICK] Unbrick Oneplus One
I originally intended to post a step-by-step, but instead I'll defer to existing/tested sources. Heisenberg's thread has tons of useful information and is well worth checking out.
More Info
Link Database
Someone has an awesome thread listing all the links you could ever ask for, so I'll defer to those that are already maintaining this. Here you are ...
http://forum.xda-developers.com/showthread.php?t=2843675
Recommended Apps
Please note that these are some of the best of the best, and most of them are not free!
Email - [email protected] Mail This is a fork of K-9, which is the Android Mutt (from Dr Who) .. mutt being a classic Unix mail program. I love Dr Who, but [email protected] was such a big improvement, I had to go with it. If you need full folder support, multiple accounts, and support for email cryptographic signing and encryption, multiple identities, and html editing of email and html signatures!
Music Player - PowerAmp - this is by the best music player I've used, bar none. If you don't want it messing with your custom lockscreen wallpaper, you can tell it not to, or add a whole second/custom lockscreen over the original. It has its own EQ, but I don't need it with Viper. To make PowerAmp compatible with Viper, simply turn off the direct volume control. You can use Xposed to add more volume steps if you like the extra control that PowerAmp's default has.
Video Player - VLC Video Lan Client Plays everything, does everything, streams videos, and has remote control apps to connect to other VLCs anywhere on your network.
QuickPic - QuickPic is a replacement for the stock Cyanogen Gallery. It works and acts much the same only its much much faster. Another good choice is Piktures, but new users may find it a bit more complicated, and it doesn't seem to be nearly as fast.
Agent - While much of what Agent does can be duplicated with other tools, the ease of use and flexibility of this tool can't be beat. It monitors your calendar for meetings and silences your phone, knows when you are driving and responds to your texts (and/or reads them to you), detects when your sleeping and makes your phone quiet (even if you sleep at different times). Has a battery saver mode, and can even remember where you parked. The Meeting agent works best if your calendar supports the "Busy" flag, which Google removed about a year ago, so ...
Today Calendar - The Today Calendar is just a really beautiful app and has some nice widgets (although I just use cLock from Cyanogen to show my calendar and make appointments via Voice commands, so I don't see Today much, I still bought it). It has the Busy flag and all sorts of features. If you want one a little less flashy (and free), try Boxer Calendar.
File Manager - The FX File Manager is by far the greatest file manager. It has everything built in, including SMB to network with Windows and SFTP to network with any machines running SSH. App Management, Media Refresh, and nice clean material design! Bloat free!
FXR Wifi Repair - Get this app and install it NOW! You will thank me the day you end up needing it!
Project Toolbar
For those on Tapatalk that don't get the toolbar, here it is ...
Downloads
ScreenShots
Reviews
Feature Requests
Bug Reports
.
I'm running 12.1-20151030 deodexed version. Could you provide me links to proper Xposed installer? Or is it ok to flash that one package with all that installed?
Sent from my A0001 using XDA Free mobile app
Tyga187 said:
I'm running 12.1-20151030 deodexed version. Could you provide me links to proper Xposed installer and Viper? Or is it ok to flash that one package with all that installed?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Don't know if 10/30 needs deodex or not but if its before jgcaaps hacks you'll need the older Xposed. I have it and Ill upload it for you to my site (Eddon Systems Download Page ... link in first post). Viper is already there (look for LolliViper).
If you don't mind taking the time to do a clean flash, Aardvark is based on the 11/08 build with the Apple code. All works out of the box Dirty flash possible, but can lead to weird problems.
I'll upload Xposed v75 right now
More about me at https://eddon.systems
Ok so it is possible to run odexed version and have Xposed working? I've heard that I need deodexed version for exposed that's why I'm on 20151030.
Thanks a lot for fast response!
Sent from my A0001 using XDA Free mobile app
Deodex and Xposed
The newer builds are made in such a way that you can use them with Odex builds without problems. We even have a special "Hacked" version of Xposed that prevents the possible slowdown issues and bypassing jgcaap's ART improvements.
So yes, use Odex and new builds and preferably the "Hacked ZIP" for the framework, although normal v75 still works. Or flash Aardvark. I've got maybe a dozen Xposed modules active.
The reason you don't see newer Deodex is because they aren't needed anymore
uudruid74 said:
The newer builds are made in such a way that you can use them with Odex builds without problems. We even have a special "Hacked" version of Xposed that prevents the possible slowdown issues and bypassing jgcaap's ART improvements.
So yes, use Odex and new builds and preferably the "Hacked ZIP" for the framework, although normal v75 still works. Or flash Aardvark. I've got maybe a dozen Xposed modules active.
The reason you don't see newer Deodex is because they aren't needed anymore
Click to expand...
Click to collapse
Which build has Apple code ? Normal odexed build , deodexed or bionic build ?
lokesh.3440 said:
Which build has Apple code ? Normal odexed build , deodexed or bionic build ?
Click to expand...
Click to collapse
It varies based on date and jgcaap's whim. The 11/08 builds do. I don't think any deodex builds do because he stopped making those before the Apple assembler code experiments.
Since 11/08 has it, Aardvark has it.
Bionic isn't a ROM build, its the Android low level C library to which the Apple code is being added.
More about me at https://eddon.systems
uudruid74 said:
It varies based on date and jgcaap's whim. The 11/08 builds do. I don't think any deodex builds do because he stopped making those before the Apple assembler code experiments.
Since 11/08 has it, Aardvark has it.
Bionic isn't a ROM build, its the Android low level C library to which the Apple code is being added.
More about me at https://eddon.systems
Click to expand...
Click to collapse
I m downloading latest build now.
Good job Evan. This will definitely help Jorge and the Marshmallow project. Thanks in advance brother.. See you on the testing ground.
Tom 2.0
Purerawenergy said:
Good job Evan. This will definitely help Jorge and the Marshmallow project. Thanks in advance brother.. See you on the testing ground.
Tom 2.0
Click to expand...
Click to collapse
I'm going to be stealing your post you made in the other thread about battery tweaks ... Greenify, Amplify, PowerNap and all that. It will go in the tweaks post. Let me know if that info is changed and if you can remember the date or post number for when I go digging.
More about me at https://eddon.systems
uudruid74 said:
I'm going to be stealing your post you made in the other thread about battery tweaks ... Greenify, Amplify, PowerNap and all that. It will go in the tweaks post. Let me know if that info is changed and if you can remember the date or post number for when I go digging.
More about me at https://eddon.systems
Click to expand...
Click to collapse
You may want to link my buddy @v7 in there somewhere if you want. He's the wake lock master Bro. And his helpfulness is awe inspiring.
Tom 2.0
---------- Post added at 03:36 PM ---------- Previous post was at 02:50 PM ----------
Oh and it's not stealing if you ask someone. Haha
Tom 2.0
Purerawenergy said:
You may want to link my buddy @v7 in there somewhere if you want. He's the wake lock master Bro. And his helpfulness is awe inspiring.
Tom 2.0
---------- Post added at 03:36 PM ---------- Previous post was at 02:50 PM ----------
Oh and it's not stealing if you ask someone. Haha
Tom 2.0
Click to expand...
Click to collapse
Actually, I put your name in as a contributor (and obviously @jgcaap) which gives you a lot more access. That way, if I'm hit by a bus tomorrow, other people can step in (its the admin in me). You might be able to edit the project page and initial reserved posts yourself.
My routed here is getting old so I'm doing a reflash and adding a captive portal to disconnect people when there isn't a human body using it. I need to cut down on everyone's bandwidth usage. So ... gonna be a busy night.
More about me at https://eddon.systems
uudruid74 said:
Flashing Instructions - Full ROM
If you don't have a backup program, you can grab a really fast and free one, Backup+. XDA Forum | My Mirror - Direct Download.
Click to expand...
Click to collapse
Hi,thanks for this thread. I've downloaded aardvark but for the backup+ download from : https://eddon.systems/Download/Backup+_Beta_1_R2.apk I get a 403 forbidden.
Verstuurd vanaf mijn A0001 met Tapatalk
I am going to download your rom and test it in a couple of days
Wysłane z mojego A0001 przy użyciu Tapatalka
Well this came around at a perfect time! I haven't been actively flashing my phone much this year and my current ROM is from July 5th lol. So I'm not really new, but could use something pre made like this. Reading, backing up, and downloading this afternoon, then flash later tonight. Thanks for putting this up.
Is the rom ok to flash on system/data/cache on f2fs ?
Hello!
Before proceeding. It is absolutely necessary for you to be on a stable TWRP build (currently 3.0.2-1). Also, you must have already have had decrypted your ENTIRE phone. If your phone bootloops into TWRP, you probably didn't decrypt, and/or didn't flash no-verity properly, or it
could also be that you are on an old TWRP build.
--WiFi calling is fixed. (thanks @lordodin912 . Turned out to be the defconfig after all. Netfilter/netlink )
--Built with the latest -old v6 Uber Toolchain cross-compiler (ubertc 7 is bugged, and latest v6 doesn't boot after compile)
--Kernel optimization flags added in for Uber (thanks @lordodin912 for the info on this)
--Better 3g/4g connectivity. Which should hopefully lead to less polls to satellites, and hopefully reduce battery consumption (May need to upgrade to latest bootloader and radio).
--ConservativeX governor and a few others added in
--ConservativeX is default
--ROM tweaks to init.qcom.post_boot to do the following : ensure min CPU freq is at 307mhz for all cpus, 133mhz for GPU, modified cpu_boost and other tunables for bettery battery usage, other small tweaks.
--GPU gov set to simple_ondemand by default
--Many TCP congestion algorithms enabled, westwood+ is default, and recommended.
--Small tweak to ZEN_DECISION hotplug
More things fixed/tuned
*testing* AutoSMP hotplug added to kernel. (idk wtf it is though--likely not working)
--Force current charge. Ability to override charging rate. Might set to max rate (1500mAh) by default. This means your cable+charge combo will charge as fast as it can.
6.5 will not force wipe, but if you have bugs with wifi calling, texting, or rootswitch freezing, this is an indication you have to do a Factory Reset within recovery.
Wifi calling fixed, sms fixed. No bugs that I can find.
You can turn off WiFi while on a WiFi call also. It will stay connected and switch to 4g. First connection may take up to 10 seconds, but it's just the first time.
Your phone will be very slow for the initial setup. Once you finish setting up your email, and fingerprint and all that, reboot your device.
If you have factory reset, you will need to update Google Assistant, and Google Play Services. Both of those updates can be done from opening Google Assistant. She won't work until these are installed/updated. SafetyNet bypass also requires Google Play Services, so just be sure to have all updates installed from play store.
LG Music is back in. I added back in the LG update center and the weather lockscreen thing, but they doesn't show up. I'll make a separate zip that works later in the future. For now, you can download smartworld and other things from LGs website.
One more thing, once your battery goes down to 10%, your phone will slow down and be as conservative as possible. I don't believe at 10% anyone will be worried about a smooth experience, but rather that their phone can last them enough time (it will!!). The savings is even greater if you enable Battery Saver at 15%.
Here is v6.5--perfected
You don't have to wipe anything.
However, if you get one of the following bugs, you will have to factory reset in recovery:
**Rootswitch disable freezes phone
**SMS dont always send, or won't send with root disabled
**No call connection or sound when calling after disabling wifi
**Literally any other bug
Development for NSS H918 will come to a halt as of 6.5, as I need to make an update for the other carriers. Additionally, IRL will be taking over for a month or two.
========================================================
Sidebar:
Here is the 6.5 kernel. Note : this is not an update for v6.0, this is only a kernel to be used on other ROMs.
v6 info below
(old in from previous update)
v6 NSS ROM has been rebased on the latest build from LG (10j). The kernel for v6 has also been built from source from the 10j sources. If you want the stock source for 10j kernel download it frmo my thread in the dev section. The one release by LG does not work as-is. I had to go through it and fix multiple errors preventing compile.
v6 WILL wipe your phone. All your apps, settings, games, and save states will be erased! This will not wipe your SD card, nor internal storage.
v6 is heavily debloated. ROM size is a mere 1.06 GB.
There is no kernel-only zip for v6, nor will there be.
I am also not releasing a way to flash v6 without wiping. The wipe is intended to clear any corrupted caches and/or other issues.
In v6, everything you need to pass SafetyNet is already included. Just disable root with Rootswitch, and you can play Pokemon Go, use Android Pay, and any other app that uses Google SafetyNet.
This ROM and kernel have been heavily modified for speed, stability, and battery.
I have changed the default CPU governor to Bioshock.
Here are some changes for v6
v6 will wipe your data!
Based off LGs latest build (V10j). Comes with matching kernel from 10j as well.
Kernel optimizations to the cpu. CPU ramps down quicker, is more conservative (probably best if you leave CPU settings as they come).
Cancun and triton disabled. Triton removed entirely.
Core Control Helper disabled.
New governors have been added! The default governor is now Bioshock.
You have a choice from ElementalX, Despair, Darkness, Alucard, Wheatley, blu_active, uhh prob 1 or 2 others. Note that not all governors are optimized for this chipset and may cause high CPU usage. Bioshock and blu_active work great! Note that the Darkness driver is outdated. Alucard24 did update it a few days ago, but for now, I don't recommend the Darkness driver.
V6 WILL WIPE YOUR PHONE EVERY TIME YOU FLASH IT!
This new version is going to WIPE your PHONE! This means that your apps, save states for games, games, and custom settings will be deleted.
You can backup your call logs and text+mms messages. My favorite app is called SMS Backup and Restore (by Carbonite).
If you have games and/or apps that you have to backup, you can use Titanium Backup. DO NOT BACKUP SYSTEM APPS! Basically if the app is not white in the Titanium Backup list, do not back it up. If it is green, or red, do not back it up, and certainly don't restore it on the new ROM!!!
ROM is much smaller now. ZIP is only 1.06GB. Lots more stuff ripped out of it. Shouldn't download new stock updates either. Will post a full debloat list tomorrow. No features were harmed in the making of this ROM.
I personally prefer to just use Google Assistant for pretty much everything, including Weather and Weather notifications. So the LG Weather has been removed.
I have 2 rebloat zips.
The LG only zip restores LG Weather, LE QMemoPlus (quickcapture), LG Music, and LG Update center.
The full rebloat zip restores everything minus carrier spyware, and lookout. I do not recommend flashing the full rebloat zip, and if you must, be sure to open the ZIP and delete anything out of it you do not specifically want to re-add. Don't flash the whole 450MB zip just to get LG Backup or something like that.
Phone likes to sleep, sometimes it goes hours without dropping 1%... It's weird... Idk .
Remember, if you don't use NFC, turn it off and save a little extra battery.
Also, phone does not have OK Google....
It only has Google Assistant . She is really awesome! It does not identify as a Pixel either.
Here is the link to v6. It will wipe your phone any time that you flash it! Note that the .ZIP says (fixed). This is because it already includes the fix for WiFi calling, SMS, and hotspot. I used some of the active members as guinea pigs, sue me
So once you flash your phone, just wait... It will take a long time. Once it boots, it will ask for your SIM card. Just wait a minute, and it will come on.
Go through the initial setup, make sure to give Color Control and Rootswitch SU access when prompted (will be really early, if you miss it just open SuperSU app and force grant permission).
Once you finish initial setup with fingerprint and all that stuff let it download whatever Google Play apps it finds, then get to your home screen and reboot the phone to complete setup.
Note, you must manually install Google Play Services. If you hold your Home button, it will activate Google Assistant (same as before with OK Google), and it will get a Services download.
Also, be sure to open Maps, it too will ask you to do a Google Play Services download.
If SafetyNet fails, you do not have Google Play Services, or you forgot to disable root.
SafetyNet passes root check, and unlocked bootloader check.
Here is everything that was ripped out of the ROM
Here is a ZIP to restore some of the removed LG apps on v6 for the 10j build.
This only includes
LG Music app + widget
LG Weather + everything related to it
LG Qmemoplus
LG UpdateCenter
And here is the full rebloat.zip (eww)
/system/app/AndroidPay
/system/app/BookmarkProvider
/system/app/CloudPrint
/system/app/Drive
/system/app/DriveActivator
/system/app/EasterEgg
/system/app/EditorsDocs
/system/app/EditorsSheets
/system/app/EditorsSlides
/system/app/Gmail2
/system/app/GnssAirTest
/system/app/GnssLogCat
/system/app/GnssPosTest
/system/app/GnssTest
/system/app/GoogleCalendarSyncAdapter
/system/app/GooglePrintRecommendationService
/system/app/Hangouts
/system/app/LGAccount
/system/app/LGAirDrive
/system/app/LGBackupLauncher
/system/app/LGDrm
/system/app/LGFOTA
/system/app/LGMusicShare
/system/app/LGSpringCleaning
/system/app/MirrorLinkServer
/system/app/Music2
/system/app/Photos
/system/app/SignatureWallpaper
/system/app/SmartMessagingEngine
/system/app/SmartShare
/system/app/SmartShareProvider
/system/app/talkback
/system/app/Videos
/system/app/YouTube
/system/etc/permissions/com.lge.sizechangable.weather.platform.xml
/system/etc/amzn.mshop.properties
/system/priv-app/AdaptClient
/system/priv-app/CloudHub
/system/priv-app/facebook-installer
/system/priv-app/GoogleFeedback
/system/priv-app/LG360VideoWallpaper
/system/priv-app/LG360Wallpaper
/system/priv-app/LGAirDriveSetting
/system/priv-app/LGApplicationManager
/system/priv-app/LGBackup
/system/priv-app/LGEmail
/system/priv-app/LGExchange
/system/priv-app/LGGestureAnswering
/system/priv-app/LGLDB
/system/priv-app/LGMapUI
/system/priv-app/LGMusic
/system/priv-app/LGMusicController
/system/priv-app/LGMusicWidget
/system/priv-app/LGNLPService
/system/priv-app/LGPartnerBookmarksProvider
/system/priv-app/LGPCSuiteService
/system/priv-app/LGQHelp
/system/priv-app/LGQHelpService
/system/priv-app/LGSignBoardInitialGuide
/system/priv-app/LGSmartSharePush
/system/priv-app/LGSnapPage
/system/priv-app/LGTasksProvider
/system/priv-app/LGTTSPAService
/system/priv-app/LGUpdateCenter
/system/priv-app/LGVoiceCare
/system/priv-app/LGVRPlayer
/system/priv-app/LGWeatherService
/system/priv-app/LGWernickeManager
/system/priv-app/Lookout
/system/priv-app/MyPlacesEngine
/system/priv-app/MyPlacesSettings
/system/priv-app/NameID
/system/priv-app/Tag
/system/priv-app/TMO_MyAccount
/system/vendor/app/facebook-appmanager
/system/vendor/overlay/com.android.providers.partnerbookmarks
/system/vendor/overlay/com.lge.appbox.client
/system/vendor/overlay/com.lge.bnr
/system/vendor/overlay/com.lge.exchange
/system/vendor/overlay/com.lge.friendsmanager
/system/vendor/overlay/com.lge.lgmapui
/system/vendor/overlay/com.lge.lgworld
/system/vendor/overlay/com.lge.lifetracker
/system/vendor/overlay/com.lge.mlt
/system/vendor/overlay/com.lge.mtalk.sf
/system/vendor/overlay/com.lge.qhelp
/system/vendor/overlay/com.lge.qmemoplus
/system/vendor/overlay/com.lge.sizechangable.weather
/system/vendor/overlay/com.lge.sizechangable.weather.platform
/system/vendor/overlay/com.lge.sizechangable.weather.theme.optimus
/system/vendor/overlay/com.lge.smartsharepush
/system/vendor/overlay/com.lge.updatecenter
/system/vendor/overlay/com.lge.wernicke.nlp
Below is just old info from previous ROMs.
Before proceeding. It is absolutely necessary for you to be on a stable TWRP build (currently 3.0.2-1). Also, you must have already have had decrypted your ENTIRE phone. If your phone bootloops into TWRP, you probably didn't decrypt, and/or didn't flash no-verity properly, or it could also be that you are on an old TWRP build.
Here we have the base NRD90M ROM from LG.
I have added a few mods to it.
FEATURES
**This ROM is deODEXd
**Has init.d support
**Modified build.prop for better performance and hardware utility
**Removed bloatware (including that HORRID Lookout)
**Force encrypt disabled
**New kernel built-in.
**Based off 3.18.31 from @jcadduono source (thanks so much)!
**Added in the blu_active governor and set as default (via post_boot)
**No-op scheduler is default, and recommended
**Updated build.prop for better Hotspot support.
**More build.prop tweaks
**init.d support baked into the kernel
**Battery life should be noticeably improved, with no loss of performance (maybe even a bit faster).
**No need to wipe anything. System and caches are automatically wiped.
**Updated to SuperSU 2.78 SR4
**Updated boot and shutdown animation to the Android 7 default (thanks @freeza )
**More bloat removed
** Now includes more performance tweaks.
**Full Busybox support included!
**Built-in DNS Ad-blocking
**Fixed updater-script and binary
**Removed Sony Bravia/Xperia Engine
**Zen_Decision HotPlug enabled by default. (This will improve battery life, especially when your screen is off)
**TCP Congestion controller set to Westwood+ (improved download speeds)
**KCAL Color Control! Plus the Color Control app! Thanks to @savoca for KCAL and the app! Thanks to @freeza for the updated KCAL.c source file
**IO Stats for scheduler turned off
**IO Read ahead set to 2048kb
**Added init.d scripts to optimize your phone, and keep it fast over time.
**VPN is fixed!
**Gallery locked files are fixed!
**Bluetooth and FM should be fixed!
**No hotspot or ADB debug issues!
**More things I can't remember.
Kernel built on the Linaro 6.1.1 x86_x64 toolchain
Latest: v5.5
If you are already on v5.1,here is the 5.5 update. This is intended only for people already on v5.1. It will not wipe anything, and your phone will not need to do its initial setup.
Here are the changes for v5.5:
The main changes here are even more battery saving
**some voltage control preparations (still not active)
**added a DNS resolver module to maybe help some people with hotspot.
**Bluetooth and FM should work even better than before (hopefully not worse lol) **added assertive display which should help draw less power with screen on (not sure if it is actually working, but meh it's in there)
** C-states are made aware in the kernel, so sleeping should be more effective, while waking up should be more snappy.
More things. Do it!
Can confirm Pokemon GO and Android Pay work perfectly. Just need to hide root.
Use the app attached.
Checkmark where it says "Stop all su daemons"
Reboot
Open RootSwitch again, and the checkmark should still be there, click disable root, and test with an app called SafetyNet Helper Sample from Play Store. When root is disabled, SafetyNet test will pass with a full green screen.
When you are done playing, you can enable root again. The game checks every so often, so root needs to be disabled to play for X amount of time.
Here are the changes for v5.1:
The only change in v5.1 that it has my updated kernel. It had previously been giving bugs to random people in bluetooth. Also, FM radio was broken. I am happy to announce that as of 5.1, all functions are in full working order, and there should be nothing else wrong in the ROM.
Here are the changes for v5:
**ViPER4Android is preinstalled
**Kernel updates to latest sources (no changes other than updates)
**Rebased ROM to a full system dump. Major thanks to @NotATreoFan ! His intuition was quite helpful. This should fix issues with WiFi calling, and other odd bugs that have been creeping about.
**Included Titanium Backup pre-installed. I highly recommend getting the license, this program rocks, and never has ads. With a license you can do batch functions, and theres more features.
**Included Kernel Adiutor to prepare future kernel updates (CPU/GPU under+over clocking later on). You can also use this to tweak I/O settings, governor, screen color). Everything should run pretty good as it is, but what I do, is set read_head in I/O to 2048, and disable I/O Stats. I also set it on boot. I do not recommend modifying any CPU or GPU frequencies since there are no changes in the kernel to allow for that.
**Fully debloated. Thanks again to NATF for pointing out the files that were installing the last bit of carrier-based bloat (amazon, facebook stub installer, etc).
**Updated to latest Super SU
**Other things here and there to try and fix bugs.
**Oh, the FM module from the original ROM was also restored. This, in conjunction with the files retrieved from NATF's full dump, should fix FM!
**If you have issues on your phone, and are trying to fix them, I recommend you do a clean install.
**However, if your phone is fine and you have had no issues, you can go ahead and just dirty flash.
No need to wipe anything. The only people who had to or need to wipe, are those on my v2.0 ROM. If you are on any version below or higher (including 2.1) you do not need to wipe anything. If you are on stock ROM, ODEXd or deODEXd, or any other NRD90M ROM, you don't need to wipe, the ZIP will take care of everything for you. /data will not be wiped, so all your old apps and settings will be there. Internal storage is of course untouched.
For anyone interested in my color options, they are:
My new settings are:
All 3 colors at 256
Saturation 64
Value 127
Contrast 129
Know that I love deep, rich, vibrant colors. Also, changing colors will not change effects on pictures taken! This is post-processing. Your phone's screen is what changes, not the files that you create.
Note: Adding saturation (vibrance) will always give some sort of color banding -especially since KCAL is post-processing. You can minimize color banding by ever-so-slightly reducing gamma (read as "Value" in the Color Control app), and by ever-so-slightly fine-tuning Contrast. The value changes would be minimal, and the color banding will only be reduced ever-so-slightly, but this is just how it is. Nonetheless, the device looks friggin amazing with the color options set.
Thanks @zhuhang for V4A!
Major thanks to @Chainfire for creating SuperSU
Major thanks to @jcadduono for the root exploit, AND for the TWRP image(s), AND for inspiring me to learn to do it. Also, he supplied the stock System.img, boot.img, and sources for a custom kernel!/RealMVP
Viper4Android is included! To enable, run the app, and configure how you please!
More to come (as I learn to do it)
Please make any requests. If it is not too difficult, I will learn how to, and add it to the MODDED ROM!
REBLOAT
If you want to add in things I removed, flash this. It will include all apps that were removed. You can open the ZIP and simply delete anything inside the system folder that you don't want before you flash it.
Debloat list
Removed from /system/
system/app/CloudPrint*
system/app/Drive*
system/app/DriveActivator*
system/app/EditorsDocs*
system/app/Gmail2*
system/app/Hangouts*
system/app/Music2*
system/app/talkback*
system/app/Videos*
system/app/YouTube*
system/etc/recovery-resource.dat*
system/priv-app/LGEmail*
system/priv-app/LGTasksProvider*
system/recovery-from-boot.p*
system/app/AndroidPay*
system/priv-app/facebook-installer*
system/priv-app/GoogleFeedback*
system/app/LGAccount*
system/app/LGAirDrive*
system/priv-app/LGAirDriveSetting*
system/priv-app/LGBackup*
system/app/LGBackupLauncher*
system/priv-app/LGExchange*
system/app/LGFOTA*
system/app/LGMusicShare*
system/priv-app/LGPartnerBookmarksProvider*
system/app/LGSpringCleaning*
system/priv-app/Lookout*
system/priv-app/TMO_MyAccount*
system/priv-app/LGApplicationManager*
system/vendor/overlay/com.lge.friendsmanager*
system/vendor/app/facebook-appmanager*
system/priv-app/LGPCSuiteService*
system/priv-app/PromoHelper*
system/priv-app/LGQHelp*
system/priv-app/LGQHelpService*
system/priv-app/NameID*
system/priv-app/LGUpdateCenter*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.android.providers.partnerbookmarks*
system/vendor/overlay/com.lge.appbox.client*
system/vendor/overlay/com.lge.exchange*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.lge.bnr*
system/etc/amzn.mshop.properties
system/vendor/overlay/com.lge.lgworld*
system/vendor/overlay/com.lge.mlt*
system/vendor/overlay/com.lge.lifetracker*
Source for kernel is at https://github.com/Tilde88/nss
Thanks to @jcadduono for the amazing original source he made for us ( you can find it here : https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Few minutes you say. Well I shall be one of the first to try it ^.^
Thanks for the hard work*.
shadowxaero said:
Few minutes you say. Well I shall be one of the first to try it ^.^
Thanks for the hard word.
Click to expand...
Click to collapse
Sorry, I noticed I missed 2 lines of scripts after I started upload. I just now started the proper upload. ETA is 15m from now.
I'll be the third to try this ... This is awesome ! Thanks dude ???
Tilde88 said:
Sorry, I noticed I missed 2 lines of scripts after I started upload. I just now started the proper upload. ETA is 15m from now.
Click to expand...
Click to collapse
Such a tease haha
thank you so much for this. now i am using your stock deodexd rom and what will be the proper way to install this over it? is it possible for you to put up the step by step instruction on how to install this rom in op?
thanks!
hslayer said:
thank you so much for this. now i am using your stock deodexd rom and what will be the proper way to install this over it? is it possible for you to put up the step by step instruction on how to install this rom in op?
thanks!
Click to expand...
Click to collapse
Yea I'll add something to the OP tomorrow.
You can flash this without any other steps. Just copy to phone, boot to TWRP, flash. Everything else is taken care of.
Tilde88 said:
Yea I'll add something to the OP tomorrow.
You can flash this without any other steps. Just copy to phone, boot to TWRP, flash. Everything else is taken care of.
Click to expand...
Click to collapse
Question. Does adb commands work for you? The box wont popup for me to authorize the device.
Awesome ness job @Tilde88...
Deleted
Sent from my Pixel XL using XDA-Developers mobile app
Follow the steps listed on my thread and it will work @ ViPER4Android.
Lol'd.
I was able to successfully port it, as displayed by the poll and close to 300 downloads.
shadowxaero said:
Question. Does adb commands work for you? The box wont popup for me to authorize the device.
Click to expand...
Click to collapse
I was wondering if that was just me. No, USB Debugging does not work for me either. Hmm... Now how did I break ADB integration? And how do I fix it?!
Paradoxumical said:
Follow the steps listed on my thread and it will work @ ViPER4Android.
Lol'd.
I was able to successfully port it, as displayed by the poll and close to 300 downloads.
Click to expand...
Click to collapse
Ok I'll try again later. Oh, I thought you were a different person lol.
I did try the steps in your OP. I also baked in all the files, and set all permissions accordingly with the updater script. No matter what, It always tells me that the Driver must be installed. Upon trying to install, it says IO Error. Even though root is on, and System is R/W. /shrug
I am assuming just bout to recovery and flash?
Is there any way to disable the sound mod if I wanted to?
Thank you Tilde88 for your hard work. Thats really awesome to have ROM like that.
Do you think you can also add:
1. boot animation: http://forum.xda-developers.com/v20/themes/stock-android-7-0-boot-shutdown-t3499524
2. 2nd screen flash on new text: http://forum.xda-developers.com/v20/themes/2nd-screen-flash-text-message-tasker-t3490220
3. Also change emoji to samsung ones. Those from LG are terrible. http://forum.xda-developers.com/v20/themes/aroma-1-click-emoji-changer-10-to-pick-t3499517
4. Ad blocker is the same as Ad away? I wish we could get rid of adds from apps.
Thank you again
What's the difference between this rom and the other one that you posted? This one just has mods baked in?
Can you dirty flash this over stock ROM
Sent from my Pixel XL using XDA-Developers mobile app
Paradoxumical said:
Follow the steps listed on my thread and it will work @ ViPER4Android.
Lol'd.
I was able to successfully port it, as displayed by the poll and close to 300 downloads.
Click to expand...
Click to collapse
Yes. Your viper is working. I can't get XHiFi working. But, I don't care. The original viper works great!
lightninbug said:
What's the difference between this rom and the other one that you posted? This one just has mods baked in?
Click to expand...
Click to collapse
@Tilde88 ? There is also another rom with bravia built in, what are the differences?? Why not just update your other thread/rom?
[QRCODE][/QRCODE]Hello!
Before proceeding. It is absolutely necessary for you to be on a stable TWRP build (currently, RC8, 3.0.2-0, and 3.0.2-1). Also, you must have already have had decrypted your ENTIRE phone. If your phone bootloops into TWRP, you probably didn't decrypt, and/or didn't flash no-verity properly, or it could also be that you are on an old TWRP build.
Here we have the base NRD90M ROM from LG.
I have added a few mods to it.
FEATURES
**Multi-user working!
**This ROM is deODEXd
**Has init.d support
**Modified build.prop for better performance and hardware utility
**Removed bloatware (including that HORRID Lookout)
**Force encrypt disabled
**New kernel built-in.
**Based off 3.18.31 from @jcadduono source (thanks so much)!
**Added in the blu_active governor and set as default (via post_boot)
**No-op scheduler is default, and recommended
**Updated build.prop for better Hotspot support.
**More build.prop tweaks
**init.d support baked into the kernel
**Battery life should be noticeably improved, with no loss of performance (maybe even a bit faster).
**No need to wipe anything. System and caches are automatically wiped.
**Updated to SuperSU 2.78 SR4
**Updated boot and shutdown animation to the Android 7 default (thanks @freeza )
**More bloat removed
** Now includes more performance tweaks.
**Full Busybox support included!
**Fixed updater-script and binary
**Removed Sony Bravia/Xperia Engine
**Zen_Decision HotPlug enabled by default. (This will improve battery life, especially when your screen is off)
**TCP Congestion controller set to Westwood+ (improved download speeds)
**KCAL Color Control! Plus the Color Control app! Thanks to @savoca for KCAL and the app! Thanks to @freeza for the updated KCAL.c source file
**IO Stats for scheduler turned off
**IO Read ahead set to 2048kb
**Added init.d scripts to optimize your phone, and keep it fast over time.
**VPN is fixed!
**Gallery locked files are fixed!
**Bluetooth and FM should be fixed!
**No hotspot or ADB debug issues!
**More things I can't remember.
Kernel built on the Linaro 6.1.1 x86_x64 toolchain
Thanks to @imucarmen for getting me the IMG files, and for testing.
Latest: v5.6
The only change in 5.6 is the addition of LGMessage. Somehow this ROM did not include a text messaging app... WTF? So I added it in from my H918. v5.6 is a full ROM, not just an update. You do not need to be on 5.1 first. Just flash 5.6 and good to go.
v5.5 changes below
v5.5 is intended only for people already on v5.1. It will not wipe anything, and your phone will not need to do its initial setup. 5.5 is an update only! You must first flash 5.1, then 5.5. You can tell TWRP to flash files in sequence, so it's no hassle. ZIP no longer checks your device, so be sure that you are flashing for the model the sticker on the phone says that it is.
Here are the changes for v5.5:
Removed boot state verification. This allows your device to pass CTS on SafetyNet. That means that you are able to use a root hide program, or maybe full unroot within SuperSU, and apps like Android Pay and Pokemon GO will work. They will never work if root is detected, no matter what.
Used more independent defconfig lines, hopefully static will go away... I highly doubt it, might even cause a no-boot issue. If it does, just tell me and I'll fix it up.
The main changes here are even more battery saving
**some voltage control preparations (still not active)
**added a DNS resolver module to maybe help some people with hotspot.
**Bluetooth and FM should work even better than before (hopefully not worse lol)
** C-states are made aware in the kernel, so sleeping should be more effective, while waking up should be more snappy.
More things. Do it!
Can confirm Pokemon GO and Android Pay work perfectly. Just need to hide root.
Use the app attached.
Checkmark where it says "Stop all su daemons"
Reboot
Open RootSwitch again, and the checkmark should still be there, click disable root, and test with an app called SafetyNet Helper Sample from Play Store. When root is disabled, SafetyNet test will pass with a full green screen.
When you are done playing, you can enable root again. The game checks every so often, so root needs to be disabled to play for X amount of time.
Here are the changes for v5:
**ViPER4Android is preinstalled
**Kernel updates to latest sources (no changes other than updates)
**Included Titanium Backup pre-installed. I highly recommend getting the license, this program rocks, and never has ads. With a license you can do batch functions, and theres more features.
**Included Kernel Adiutor to prepare future kernel updates (CPU/GPU under+over clocking later on). You can also use this to tweak I/O settings, governor, screen color). Everything should run pretty good as it is, but what I do, is set read_head in I/O to 2048, and disable I/O Stats. I also set it on boot. I do not recommend modifying any CPU or GPU frequencies since there are no changes in the kernel to allow for that.
**Updated to latest Super SU
No need to wipe anything. If you are on stock ROM, ODEXd or deODEXd, or any other NRD90M ROM, you don't need to wipe, the ZIP will take care of everything for you. /data will not be wiped, so all your old apps and settings will be there. Internal storage is of course untouched.
For anyone interested in my color options, they are:
My new settings are:
All 3 colors at 256
Saturation 68
Value 129
Contrast 127
Know that I love deep, rich, vibrant colors. Also, changing colors will not change effects on pictures taken! This is post-processing. Your phone's screen is what changes, not the files that you create.
Note: Adding saturation (vibrance) will always give some sort of color banding -especially since KCAL is post-processing. You can minimize color banding by ever-so-slightly reducing gamma (read as "Value" in the Color Control app), and by ever-so-slightly fine-tuning Contrast. The value changes would be minimal, and the color banding will only be reduced ever-so-slightly, but this is just how it is. Nonetheless, the device looks friggin amazing with the color options set.
Having issues? Read below.
I need you guys to hear me out on this...
I do not have this phone, I cannot do any sort of testing, nor do I keep up with your rooting method.
That said, I cannot fix things that were broken due to the bootloader (such as Static Boot), so if WiFi calling did not work for you after flashing the custom bootloader, please don't ask if it is fixed... I do not know how to fix it. When/if it is fixed, I will let you guys know that it is fixed and who to thank for said fix.
Additionally, I need you to tell me things that do not work. I might not be able to get to all messages, or questions, so if you see that I did not reply, ask again and again until I do... I will reply and answer (obviously don't spam). Be sure to quote me, mention me, or message me. I do not check-in with these threads, just the H918 thread. If you do not send me a notice, I will not know that my attention is needed.
What issues that are ROM-related, not user-related can you report? You will know it is user-related if you modified anything in the phone/ROM.
If you flashed a different kernel, I cannot help you; flash back to the NSS kernel, and re-test.
If you are unsure about an issue, do a clean flash (in TWRP: Wipe-->Advanced-->select Dalvik, System, Data, and Cache (DO NOT SELECT INTERNAL STORAGE OR SDCARD)-->Swipe to wipe-->Install ROM-->boot phone, do not change or install anything. Retry your issue, if it is fixed, great. If it persists, go into your SD Card, and Internal Storage, remove the folders called "Android" and ".android_secure", reboot and try again. Still doesn't work? Mention me and post it here.
Remember, you can backup your USER apps in Titanium Backup (do NOT backup system apps, or restore system apps/system data).
You can also backup your existing setup and apps in TWRP so you can flash back to your original setup. This is good if you did a clean flash, and your problem is still there, you can restore your backup and be like nothing was changed.
Thanks @zhuhang for V4A!
Major thanks to @Chainfire for creating SuperSU
Major thanks to @jcadduono for the root exploit, AND for the TWRP image(s), AND for inspiring me to learn to do it. Also, he supplied the stock System.img, boot.img, and sources for a custom kernel!/RealMVP
Viper4Android is included! To enable, run the app, and configure how you please!
More to come (as I learn to do it)
Please make any requests. If it is not too difficult, I will learn how to, and add it to the MODDED ROM!
Debloat list
Removed from /system/
system/app/CloudPrint*
system/app/Drive*
system/app/DriveActivator*
system/app/EditorsDocs*
system/app/Gmail2*
system/app/Hangouts*
system/app/Music2*
system/app/talkback*
system/app/Videos*
system/app/YouTube*
system/etc/recovery-resource.dat*
system/priv-app/LGEmail*
system/priv-app/LGTasksProvider*
system/recovery-from-boot.p*
system/app/AndroidPay*
system/priv-app/facebook-installer*
system/priv-app/GoogleFeedback*
system/app/LGAccount*
system/app/LGAirDrive*
system/priv-app/LGAirDriveSetting*
system/priv-app/LGBackup*
system/app/LGBackupLauncher*
system/priv-app/LGExchange*
system/app/LGFOTA*
system/app/LGMusicShare*
system/priv-app/LGPartnerBookmarksProvider*
system/app/LGSpringCleaning*
system/priv-app/Lookout*
system/priv-app/TMO_MyAccount*
system/priv-app/LGApplicationManager*
system/vendor/overlay/com.lge.friendsmanager*
system/vendor/app/facebook-appmanager*
system/priv-app/LGPCSuiteService*
system/priv-app/PromoHelper*
system/priv-app/LGQHelp*
system/priv-app/LGQHelpService*
system/priv-app/NameID*
system/priv-app/LGUpdateCenter*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.android.providers.partnerbookmarks*
system/vendor/overlay/com.lge.appbox.client*
system/vendor/overlay/com.lge.exchange*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.lge.bnr*
system/etc/amzn.mshop.properties
system/vendor/overlay/com.lge.lgworld*
system/vendor/overlay/com.lge.mlt*
system/vendor/overlay/com.lge.lifetracker*
system/priv-app/AdaptClient*
system/priv-app/ATT_ProtectPlus*
system/priv-app/ATT_DeviceHelp*
system/priv-app/ATT_Lookout*
system/priv-app/ATT_SmartLimits*
system/app/AmazonKindle*
system/priv-app/AppRecovery*
system/priv-app/VZCloud*
system/priv-app/LGVZWHelp*
system/priv-app/LGVZWStartupwizard*
system/priv-app/VZWPoaService*
Source for kernel is at (need to update)https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Thanks to @jcadduono for the amazing original source he made for us ( you can find it here : https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Awesome!! Cant wait to use this.
Request: speaker mod, Google assistant, and volume up/down to skip tracks when main screen is off.
Sent from my Pixel XL using Tapatalk
Note to all. You will notice that the theming option is missing from the settings under home. Don't fret! Theming is still in the Rom you just need to add a shortcut for it. I'm personally using Nova Prime and assigning an activity for the theming app so it makes an app icon. There are independent apps in the store that can do this as well.
Just a heads up for those of you using themes and wondering how to apply them.
@Tilde88 so a hot reboot let's you see the boot animation and I wanted to let you know it needs scaled down. It's way too large and actually is blurry because of it.
imucarmen said:
Note to all. You will notice that the theming option is missing from the settings under home. Don't fret! Theming is still in the Rom you just need to add a shortcut for it. I'm personally using Nova Prime and assigning an activity for the theming app so it makes an app icon. There are independent apps in the store that can do this as well.
Just a heads up for those of you using themes and wondering how to apply them.
@Tilde88 so a hot reboot let's you see the boot animation and I wanted to let you know it needs scaled down. It's way too large and actually is blurry because of it.
Click to expand...
Click to collapse
The bootanimation is the right size, as it is the same that I use for the other models. There is something fishy with your bootloaders after doing that conversion thing. I don't fully understand it.
Tilde88 said:
The bootanimation is the right size, as it is the same that I use for the other models. There is something fishy with your bootloaders after doing that conversion thing. I don't fully understand it.
Click to expand...
Click to collapse
I see. Just letting you know the things I'm seeing. I hot reboot on the US996 rom and the boot animation was normal size. On the vs995 the word android is gigantic. It spans from edge to edge of the display and looks like a size 26 font lol
---------- Post added at 04:58 PM ---------- Previous post was at 04:48 PM ----------
Kernel crashed @Tilde88 I was using some custom settings so maybe that's why. I was underclocking and using the Blu Active gov and the zen hotplug.
Any chance of a Sprint ROM?
N1ghtr08d said:
Any chance of a Sprint ROM?
Click to expand...
Click to collapse
Sure, get me your system.img and boot.img
imucarmen said:
Kernel crashed @Tilde88 I was using some custom settings so made that's why. I was underclocking and using the Blu Active gov and the zen hotplug.
Click to expand...
Click to collapse
I don't understand what you are saying. Lot's of typos. Also, over/underclocking does not stick, as it is not unlocked in the kernel.
Tilde88 said:
I don't understand what you are saying. Lot's of typos. Also, over/underclocking does not stick, as it is not unlocked in the kernel.
Click to expand...
Click to collapse
lol it was only one typo. Made should have been maybe.
According to Kernel Adiutor it's sticking. I have the cpu max clock set to 1920 and it never goes above it.
Tilde88 said:
Sure, get me your system.img and boot.img
Click to expand...
Click to collapse
Do you need them from the stock Sprint phone or does it matter that I flashed the stock deodexed on my phone?
N1ghtr08d said:
Do you need them from the stock Sprint phone or does it matter that I flashed the stock deodexed on my phone?
Click to expand...
Click to collapse
stock would be best... Where did you get a Sprint deodexed ROM?
not flashing prob cause i have 996 deoxed on this vzw device any way to install?
mrtruckincowboy said:
not flashing prob cause i have 996 deoxed on this vzw device any way to install?
Click to expand...
Click to collapse
I had US996 on my device and flashed to this fine. I cleaned flashed. Did you try a dirty flash? Not sure why it wouldn't flash. What kind of error are you getting?
it starts twrp again wierd error
mrtruckincowboy said:
it starts twrp again wierd error
Click to expand...
Click to collapse
you're stuck in TWRP? Did you factory reset inside the rom?
imucarmen said:
you're stuck in TWRP? Did you factory reset inside the rom?
Click to expand...
Click to collapse
not stuck
tried again now i get a map file error whats that mean ? bad file?
mrtruckincowboy said:
not stuck
tried again now i get a map file error whats that mean ? bad file?
Click to expand...
Click to collapse
Perhaps. Definitely, I would try downloading a new copy. I didn't have any issues flashing.
Can you guys tell me if you are having USB issues when plugging in to your PC. Trying to figure out if the ROM has a bug or if someone has a driver issue.
Thanks.
No issues here connecting to computer through usb.
Sent from my LG-VS995 using Tapatalk
mrtruckincowboy said:
not flashing prob cause i have 996 deoxed on this vzw device any way to install?
Click to expand...
Click to collapse
Um, this ROM and kernel is built for the VS995, so if the sticker on your phone says VS995, flash it.
Hello!
Before proceeding. It is absolutely necessary for you to be on a stable TWRP build (currently, RC8, 3.0.2-0, and 3.0.2-1). Also, you must have already have had decrypted your ENTIRE phone. If your phone bootloops into TWRP, you probably didn't decrypt, and/or didn't flash no-verity properly, or it could also be that you are on an old TWRP build.
Here we have the base NRD90M ROM from LG. This is for phone models US-996 (only flash this if the sticker on your phone says US-996. There is already a ROM for the H910, H918, and VS996 that I've made, use that instead if your device is different).
I have added a few mods to it.
I still need the Sprint system.img and boot.img, as well as for the Korean F800L, if you can get me those files, I can build for you.
FEATURES
**Multi-user working!
**This ROM is deODEXd
**Has init.d support
**Modified build.prop for better performance and hardware utility
**Removed bloatware (including that HORRID Lookout)
**Force encrypt disabled
**New kernel built-in.
**Based off 3.18.31 from @jcadduono source (thanks so much)!
**Added in the blu_active governor and set as default (via post_boot)
**No-op scheduler is default, and recommended
**Updated build.prop for better Hotspot support.
**More build.prop tweaks
**init.d support baked into the kernel
**Battery life should be noticeably improved, with no loss of performance (maybe even a bit faster).
**No need to wipe anything. System and caches are automatically wiped.
**Updated to SuperSU 2.78 SR5
**Updated boot and shutdown animation to the Android 7 default (thanks @freeza )
**More bloat removed
** Now includes more performance tweaks.
**Full Busybox support included!
**Fixed updater-script and binary
**Removed Sony Bravia/Xperia Engine
**Zen_Decision HotPlug enabled by default. (This will improve battery life, especially when your screen is off)
**TCP Congestion controller set to Westwood+ (improved download speeds)
**KCAL Color Control! Plus the Color Control app! Thanks to @savoca for KCAL and the app! Thanks to @freeza for the updated KCAL.c source file
**IO Stats for scheduler turned off
**IO Read ahead set to 2048kb
**Added init.d scripts to optimize your phone, and keep it fast over time.
**VPN is fixed!
**Gallery locked files are fixed!
**Bluetooth and FM should be fixed!
**No hotspot or ADB debug issues!
**More things I can't remember.
Kernel built on the Linaro 6.1.1 x86_x64 toolchain
Thanks to @imucarmen for getting me the IMG files, and for testing. whoops, thats from a different thread
Latest: v5.1 combined with v5.5
v5.5 is intended only for people already on v5.1. It will not wipe anything, and your phone will not need to do its initial setup. 5.5 is an update only! You must first flash 5.1, then 5.5. You can tell TWRP to flash files in sequence, so it's no hassle. ZIP no longer checks your device, so be sure that you are flashing for the model the sticker on the phone says that it is.
Here are the changes for v5.5:
Removed boot state verification. This allows your device to pass CTS on SafetyNet. That means that you might be able to use a root hide program, or maybe full unroot within SuperSU, and perhaps apps like Android Pay and Pokemon GO will work. They will never work if root is detected, no matter what.
Used more independent defconfig lines, hopefully static will go away... I highly doubt it, might even cause a no-boot issue. If it does, just tell me and I'll fix it up.
The main changes here are even more battery saving
**some voltage control preparations (still not active)
**added a DNS resolver module to maybe help some people with hotspot.
**Bluetooth and FM should work even better than before (hopefully not worse lol)
** C-states are made aware in the kernel, so sleeping should be more effective, while waking up should be more snappy.
More things. Do it!
Here are the changes for v5:
**ViPER4Android is preinstalled
**Kernel updates to latest sources (no changes other than updates)
**Included Titanium Backup pre-installed. I highly recommend getting the license, this program rocks, and never has ads. With a license you can do batch functions, and theres more features.
**Included Kernel Adiutor to prepare future kernel updates (CPU/GPU under+over clocking later on). You can also use this to tweak I/O settings, governor, screen color). Everything should run pretty good as it is, but what I do, is set read_head in I/O to 2048, and disable I/O Stats. I also set it on boot. I do not recommend modifying any CPU or GPU frequencies since there are no changes in the kernel to allow for that.
**Updated to latest Super SU
No need to wipe anything. If you are on stock ROM, ODEXd or deODEXd, or any other NRD90M ROM, you don't need to wipe, the ZIP will take care of everything for you. /data will not be wiped, so all your old apps and settings will be there. Internal storage is of course untouched.
For anyone interested in my color options, they are:
My new settings are:
All 3 colors at 256
Saturation 68
Value 129
Contrast 127
Know that I love deep, rich, vibrant colors. Also, changing colors will not change effects on pictures taken! This is post-processing. Your phone's screen is what changes, not the files that you create.
Note: Adding saturation (vibrance) will always give some sort of color banding -especially since KCAL is post-processing. You can minimize color banding by ever-so-slightly reducing gamma (read as "Value" in the Color Control app), and by ever-so-slightly fine-tuning Contrast. The value changes would be minimal, and the color banding will only be reduced ever-so-slightly, but this is just how it is. Nonetheless, the device looks friggin amazing with the color options set.
Thanks @zhuhang for V4A!
Major thanks to @Chainfire for creating SuperSU
Major thanks to @jcadduono for the root exploit, AND for the TWRP image(s), AND for inspiring me to learn to do it. Also, he supplied the stock System.img, boot.img, and sources for a custom kernel!/RealMVP
Having issues? Read below.
I need you guys to hear me out on this...
I do not have this phone, I cannot do any sort of testing, nor do I keep up with your rooting method.
That said, I cannot fix things that were broken due to the bootloader (such as Static Boot), so if WiFi calling did not work for you after flashing the custom bootloader, please don't ask if it is fixed... I do not know how to fix it. When/if it is fixed, I will let you guys know that it is fixed and who to thank for said fix.
Additionally, I need you to tell me things that do not work. I might not be able to get to all messages, or questions, so if you see that I did not reply, ask again and again until I do... I will reply and answer (obviously don't spam). Be sure to quote me, mention me, or message me. I do not check-in with these threads, just the H918 thread. If you do not send me a notice, I will not know that my attention is needed.
What issues that are ROM-related, not user-related can you report? You will know it is user-related if you modified anything in the phone/ROM.
If you flashed a different kernel, I cannot help you; flash back to the NSS kernel, and re-test.
If you are unsure about an issue, do a clean flash (in TWRP: Wipe-->Advanced-->select Dalvik, System, Data, and Cache (DO NOT SELECT INTERNAL STORAGE OR SDCARD)-->Swipe to wipe-->Install ROM-->boot phone, do not change or install anything. Retry your issue, if it is fixed, great. If it persists, go into your SD Card, and Internal Storage, remove the folders called "Android" and ".android_secure", reboot and try again. Still doesn't work? Mention me and post it here.
Remember, you can backup your USER apps in Titanium Backup (do NOT backup system apps, or restore system apps/system data).
You can also backup your existing setup and apps in TWRP so you can flash back to your original setup. This is good if you did a clean flash, and your problem is still there, you can restore your backup and be like nothing was changed.
Viper4Android is included! To enable, run the app, and configure how you please!
More to come (as I learn to do it)
Please make any requests. If it is not too difficult, I will learn how to, and add it to the MODDED ROM!
Debloat list
Removed from /system/
system/app/CloudPrint*
system/app/Drive*
system/app/DriveActivator*
system/app/EditorsDocs*
system/app/Gmail2*
system/app/Hangouts*
system/app/Music2*
system/app/talkback*
system/app/Videos*
system/app/YouTube*
system/etc/recovery-resource.dat*
system/priv-app/LGEmail*
system/priv-app/LGTasksProvider*
system/recovery-from-boot.p*
system/app/AndroidPay*
system/priv-app/facebook-installer*
system/priv-app/GoogleFeedback*
system/app/LGAccount*
system/app/LGAirDrive*
system/priv-app/LGAirDriveSetting*
system/priv-app/LGBackup*
system/app/LGBackupLauncher*
system/priv-app/LGExchange*
system/app/LGFOTA*
system/app/LGMusicShare*
system/priv-app/LGPartnerBookmarksProvider*
system/app/LGSpringCleaning*
system/priv-app/Lookout*
system/priv-app/TMO_MyAccount*
system/priv-app/LGApplicationManager*
system/vendor/overlay/com.lge.friendsmanager*
system/vendor/app/facebook-appmanager*
system/priv-app/LGPCSuiteService*
system/priv-app/PromoHelper*
system/priv-app/LGQHelp*
system/priv-app/LGQHelpService*
system/priv-app/NameID*
system/priv-app/LGUpdateCenter*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.android.providers.partnerbookmarks*
system/vendor/overlay/com.lge.appbox.client*
system/vendor/overlay/com.lge.exchange*
system/vendor/overlay/com.lge.updatecenter*
system/vendor/overlay/com.lge.bnr*
system/etc/amzn.mshop.properties
system/vendor/overlay/com.lge.lgworld*
system/vendor/overlay/com.lge.mlt*
system/vendor/overlay/com.lge.lifetracker*
system/priv-app/AdaptClient*
system/priv-app/ATT_ProtectPlus*
system/priv-app/ATT_DeviceHelp*
system/priv-app/ATT_Lookout*
system/priv-app/ATT_SmartLimits*
system/app/AmazonKindle*
system/priv-app/AppRecovery*
system/priv-app/VZCloud*
system/priv-app/LGVZWHelp*
system/priv-app/LGVZWStartupwizard*
system/priv-app/VZWPoaService*
Source for kernel is at (need to update)https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
Thanks to @jcadduono for the amazing original source he made for us ( you can find it here : https://github.com/jcadduono/android_kernel_lge_msm8996/tree/android-7.0-security
I didn't get you images for the US996 ROM :silly:
imucarmen said:
I didn't get you images for the US996 ROM :silly:
Click to expand...
Click to collapse
I already had them. I made the stock deodex US996 ROM a while back, just never a MOD ROM.
Tilde88 said:
I already had them. I made the stock deodex US996 ROM a while back, just never a MOD ROM.
Click to expand...
Click to collapse
Thank you cant to try it out
Tilde88 said:
I already had them. I made the stock deodex US996 ROM a while back, just never a MOD ROM.
Click to expand...
Click to collapse
I know. But you put my name in the OP thanking me for getting you the images
I deserve no credit!
imucarmen said:
I know. But you put my name in the OP thanking me for getting you the images
I deserve no credit!
Click to expand...
Click to collapse
LOL! Copy + paste
I plagiarize myself
lingo2012 said:
Thank you cant to try it out
Click to expand...
Click to collapse
You can't what?
Lol jk
5.1 ROM is here
Tilde88 said:
LOL! Copy + paste
I plagiarize myself
You can't what?
Lol jk
Click to expand...
Click to collapse
Lol wait sorry
lingo2012 said:
Lol wait sorry
Click to expand...
Click to collapse
Link is up btw
Thanks sir!!!
Tilde88 said:
Link is up btw
Click to expand...
Click to collapse
Do I dare try this?! Lol
Edit: you're never going to believe this... But it worked!! Flashed without issue!
bryancotton84 said:
Do I dare try this?! Lol
Edit: you're never going to believe this... But it worked!! Flashed without issue!
Click to expand...
Click to collapse
Tilde88 said:
Click to expand...
Click to collapse
Works great thank you and with the color control settings set at what you suggested is amazing.
Take it that sprint isn't able to use this just yet?
Beastmode on my LG V20
Nrod0784 said:
Take it that sprint isn't able to use this just yet?
Beastmode on my LG V20
Click to expand...
Click to collapse
He needs someone with the stock sprint rom to give him the system.img and the boot.img
Without those files, he can't do anything.
I'm guessing that it will fix HD calling, ## codes, wi-fi calling, FM and PRL updating.
Can someone please be kind enough to remind an old school n00b how to get to recovery please? I had my US996 rooted using the @jcadduono method if that makes a difference. But I seem to have forgotten the key combination/sequence to reboot in recovery.
On that note, just to be clear, this modded ROM can be flashed on top of @jcadduono rooted stock ROM without any other steps? (of course I'll be sure to check my TWRP version first)
XooLoo said:
Can someone please be kind enough to remind an old school n00b how to get to recovery please? I had my US996 rooted using the @jcadduono method if that makes a difference. But I seem to have forgotten the key combination/sequence to reboot in recovery.
On that note, just to be clear, this modded ROM can be flashed on top of @jcadduono rooted stock ROM without any other steps? (of course I'll be sure to check my TWRP version first)
Click to expand...
Click to collapse
Are you rooted? Just download a reboot app that will give you a recovery option.
bryancotton84 said:
Are you rooted? Just download a reboot app that will give you a recovery option.
Click to expand...
Click to collapse
OK that sounds simple enough. So basically that's it? I download this, reboot in recovery, flash and viola? Sorry, I came to LG from years of Samsung, so this has been a somewhat anxiety-inducing learning experience for me so far--haven't bricked, boot-looped, etc yet and trying to keep it that way if possible lol
XooLoo said:
OK that sounds simple enough. So basically that's it? I download this, reboot in recovery, flash and viola? Sorry, I came to LG from years of Samsung, so this has been a somewhat anxiety-inducing learning experience for me so far--haven't bricked, boot-looped, etc yet and trying to keep it that way if possible lol
Click to expand...
Click to collapse
That's the long and short of it! As long as you're sure you have the US996 variant. Tilde88 made this super easy to flash and I've seen a big improvement so far!
XooLoo said:
Can someone please be kind enough to remind an old school n00b how to get to recovery please? I had my US996 rooted using the @jcadduono method if that makes a difference. But I seem to have forgotten the key combination/sequence to reboot in recovery.
On that note, just to be clear, this modded ROM can be flashed on top of @jcadduono rooted stock ROM without any other steps? (of course I'll be sure to check my TWRP version first)
Click to expand...
Click to collapse
The button combo (which is important to know for any phone when rooting because what if you can't boot into the ROM?) is volume down + power and when you see the LG logo release power for a moment and repress and hold it until you see a white screen with a yes or no question. Answer yes to both questions and you'll be in TWRP. It will not factory reset you when you have TWRP installed.
SpacesungGalaxy J727P
(J727PVPU3ARC2)Disclaimer:
I am not responsible for what you do with your device. If you decide to flash this software then you are accepting any risks involved. Including, but not limited to; bricking your device, missing alarms, missing calls, loss of your job, repossession of your car, and maybe even spilt milk.
About:
This is very much a personal project that I felt others would appreciate. I enjoy retro gaming very much, and as some of you may know, emulation is very CPU intensive. Hence the reason for making Spacesung. My goal was a stock rom that was lag free, debloated, and buttery smooth for gaming. I believe I have achieved this, and so, I give this to the you, to enjoy, use, modify, and share at your discretion.
Features
•Deodexed
•Debloated- I have removed all unnecessary Samsung, Google, and Amazon apps.
•Removed all Amazon symlinks. (Libs are next.)
•Deknoxed- Note: Some leftovers may be present. If you find any please let me know.
•Rooted- SuperSu is included.
•Up to 10gb+ of internal storage is available. This number will change depending on what you install afterwards, and what you have already stored on your internal SD.
Instructions:
1. Download the ROM from here.
2. Download GoogleKeyboard. You will need this after installation because the Samsung keyboard has been removed.
3. Make sure both files are on your internal, or external storage. Either is fine.
4. Reboot to recovery and wipe, data, system, cache, & dalvik cache.
5. Install Spacesung.
6. Reboot and wait. SuperSU will cause it to boot loop once. This is just root sinking it's teeth into the system. Don't interrupt it. After the aforementioned loop, it'll take about ~5-8min to start up. This only applies to the very first boot. Afterwards it only takes ~10 seconds to startup.
7. Skip all the setup steps that require typing. This can be done after you install GoogleKeyboard.
8. Enjoy!
Special notes:
*Google play, and Google services are still installed. You can disable both if you want to. You must disable it as a device administrator under the security options first, or it will be grayed out.
*Syncing will not work, since it has also been removed.
*Device encryption and secure storage shouldn't work either.
*Chrome is still installed. It can also disabled. There is no way to remove it yet, as the 7.0 framework uses it for webview. I'm still searching for a workaround to save more space.
*Anything not listed, should be working perfectly. If something is broken, let me know. And please remember, that anything already listed is not a bug, it is intentional. If you have any issues with 3rd party apps, I will try to help you, though I make no promises.
New!: Spacesung Oreo Debloat ScriptNotes:
1. Flash in recovery after the first boot.
2. Wipe dalvik cache ONLY! (Oreo cleans up data from removed apps automagically after rebooting.)
3. Profit!
*If you want to modify what's removed, simply open the updater-script with a text editor (preferably Notepad++) and add or remove the # sign. All apps in the stock Oreo system are listed in alphabetical order. This script should be safe to flash as is. Touchwiz, Theme store, Google play, and Samsung keyboard, are not removed by default. No files will be added to your OS either.
Ex.
delete_recursive("/system/app/AmazonMP3"); ← This would be deleted. #delete_recursive("/system/app/AmazonMP3"); ← This would be ignored.
*As always, anything that I make is free to use for other projects, public or personal, without my permission. No need to ask me, just do it! Credit is always appreciated, though not required.
J727P
Spaceminer said:
SpacesungGalaxy J727P
(J727PVPU3ARC2)Disclaimer:
I am not responsible for what you do with your device. If you decide to flash this software then you are accepting any risks involved. Including, but not limited to; bricking your device, missing alarms, missing calls, loss of your job, repossession of your car, and maybe even spilt milk.
About:
This is very much a personal project that I felt others would appreciate. I enjoy retro gaming very much, and as some of you may know, emulation is very CPU intensive. Hence the reason for making Spacesung. My goal was a stock rom that was lag free, debloated, and buttery smooth for gaming. I believe I have achieved this, and so, I give this to the you, to enjoy, use, modify, and share at your discretion.
Features
•Deodexed
•Debloated- I have removed all unnecessary Samsung, Google, and Amazon apps.
•Removed all Amazon symlinks. (Libs are next.)
•Deknoxed- Note: Some leftovers may be present. If you find any please let me know.
•Rooted- SuperSu is included.
•Up to 10gb+ of internal storage is available. This number will change depending on what you install afterwards, and what you have already stored on your internal SD.
Instructions:
1. Download the ROM from here.
2. Download GoogleKeyboard. You will need this after installation because the Samsung keyboard has been removed.
3. Make sure both files are on your internal, or external storage. Either is fine.
4. Reboot to recovery and wipe, data, system, cache, & dalvik cache.
5. Install Spacesung.
6. Reboot and wait. SuperSU will cause it to boot loop once. This is just root sinking it's teeth into the system. Don't interrupt it. After the aforementioned loop, it'll take about ~5-8min to start up. This only applies to the very first boot. Afterwards it only takes ~10 seconds to startup.
7. Skip all the setup steps that require typing. This can be done after you install GoogleKeyboard.
8. Enjoy!
Special notes:
*Google play, and Google services are still installed. You can disable both if you want to. You must disable it as a device administrator under the security options first, or it will be grayed out.
*Syncing will not work, since it has also been removed.
*Device encryption and secure storage shouldn't work either.
*Chrome is still installed. It can also disabled. There is no way to remove it yet, as the 7.0 framework uses it for webview. I'm still searching for a workaround to save more space.
*Anything not listed, should be working perfectly. If something is broken, let me know. And please remember, that anything already listed is not a bug, it is intentional. If you have any issues with 3rd party apps, I will try to help you, though I make no promises.
*As always, anything that I make is free to use for other projects, public or personal, without my permission. No need to ask me, just do it! Credit is always appreciated, though not required.
Click to expand...
Click to collapse
One question did you add any kernel tweaks to your build ? An why can't I find any system tweaks ? Sorry two Questions !!
peter couniaz said:
One question did you add any kernel tweaks to your build ? An why can't I find any system tweaks ? Sorry two Questions !!
Click to expand...
Click to collapse
There are no kernel tweaks. I have been trying to build a custom kernel from source for this, however, ubuntu/virtualbox are not playing nice with my hardware. (Ubuntu stops using my CPU completely after ~10min.) This is just a very bare bones stock Rom, with Trebuchet as a launcher. There are no special system tweaks added to it. Regarding that topic, I am working on tethering, it has been very difficult though. Samsung's smali files are a huge mess to work with. I can get the "you are not subscribed to this service" notification to stop, but tethering still won't start. Are you missing any options that would normally be available on stock? If so, I would definitely like to fix that ASAP.
J727P
Spaceminer said:
There are no kernel tweaks. I have been trying to build a custom kernel from source for this, however, ubuntu/virtualbox are not playing nice with my hardware. (Ubuntu stops using my CPU completely after ~10min.) This is just a very bare bones stock Rom, with Trebuchet as a launcher. There are no special system tweaks added to it. Regarding that topic, I am working on tethering, it has been very difficult though. Samsung's smali files are a huge mess to work with. I can get the "you are not subscribed to this service" notification to stop, but tethering still won't start. Are you missing any options that would normally be available on stock? If so, I would definitely like to fix that ASAP.
Click to expand...
Click to collapse
Thank you for getting back to me an good luck with your build on a custom kernel for this phone we can really use one !! Thanks again !
Spaceminer said:
SpacesungGalaxy J727P
(J727PVPU3ARC2)Disclaimer:
I am not responsible for what you do with your device. If you decide to flash this software then you are accepting any risks involved. Including, but not limited to; bricking your device, missing alarms, missing calls, loss of your job, repossession of your car, and maybe even spilt milk.
About:
This is very much a personal project that I felt others would appreciate. I enjoy retro gaming very much, and as some of you may know, emulation is very CPU intensive. Hence the reason for making Spacesung. My goal was a stock rom that was lag free, debloated, and buttery smooth for gaming. I believe I have achieved this, and so, I give this to the you, to enjoy, use, modify, and share at your discretion.
Features
•Deodexed
•Debloated- I have removed all unnecessary Samsung, Google, and Amazon apps.
•Removed all Amazon symlinks. (Libs are next.)
•Deknoxed- Note: Some leftovers may be present. If you find any please let me know.
•Rooted- SuperSu is included.
•Up to 10gb+ of internal storage is available. This number will change depending on what you install afterwards, and what you have already stored on your internal SD.
Instructions:
1. Download the ROM from here.
2. Download GoogleKeyboard. You will need this after installation because the Samsung keyboard has been removed.
3. Make sure both files are on your internal, or external storage. Either is fine.
4. Reboot to recovery and wipe, data, system, cache, & dalvik cache.
5. Install Spacesung.
6. Reboot and wait. SuperSU will cause it to boot loop once. This is just root sinking it's teeth into the system. Don't interrupt it. After the aforementioned loop, it'll take about ~5-8min to start up. This only applies to the very first boot. Afterwards it only takes ~10 seconds to startup.
7. Skip all the setup steps that require typing. This can be done after you install GoogleKeyboard.
8. Enjoy!
Special notes:
*Google play, and Google services are still installed. You can disable both if you want to. You must disable it as a device administrator under the security options first, or it will be grayed out.
*Syncing will not work, since it has also been removed.
*Device encryption and secure storage shouldn't work either.
*Chrome is still installed. It can also disabled. There is no way to remove it yet, as the 7.0 framework uses it for webview. I'm still searching for a workaround to save more space.
*Anything not listed, should be working perfectly. If something is broken, let me know. And please remember, that anything already listed is not a bug, it is intentional. If you have any issues with 3rd party apps, I will try to help you, though I make no promises.
*As always, anything that I make is free to use for other projects, public or personal, without my permission. No need to ask me, just do it! Credit is always appreciated, though not required.
Click to expand...
Click to collapse
Downloaded and installed nicely. Tried to switch superuser with magisk but no go, need stock boot image but all in all a good clean debloated Rom. You should include a keyboard though, your link did not work so I downloaded one on my PC and transferred to internal sd and installed. If you can get magisk instead of superuser, you will have a winner !
Sent from my SM-J727P using Tapatalk
J727P
Spaceminer said:
SpacesungGalaxy J727P
(J727PVPU3ARC2)Disclaimer:
I am not responsible for what you do with your device. If you decide to flash this software then you are accepting any risks involved. Including, but not limited to; bricking your device, missing alarms, missing calls, loss of your job, repossession of your car, and maybe even spilt milk.
About:
This is very much a personal project that I felt others would appreciate. I enjoy retro gaming very much, and as some of you may know, emulation is very CPU intensive. Hence the reason for making Spacesung. My goal was a stock rom that was lag free, debloated, and buttery smooth for gaming. I believe I have achieved this, and so, I give this to the you, to enjoy, use, modify, and share at your discretion.
Features
•Deodexed
•Debloated- I have removed all unnecessary Samsung, Google, and Amazon apps.
•Removed all Amazon symlinks. (Libs are next.)
•Deknoxed- Note: Some leftovers may be present. If you find any please let me know.
•Rooted- SuperSu is included.
•Up to 10gb+ of internal storage is available. This number will change depending on what you install afterwards, and what you have already stored on your internal SD.
Instructions:
1. Download the ROM from here.
2. Download GoogleKeyboard. You will need this after installation because the Samsung keyboard has been removed.
3. Make sure both files are on your internal, or external storage. Either is fine.
4. Reboot to recovery and wipe, data, system, cache, & dalvik cache.
5. Install Spacesung.
6. Reboot and wait. SuperSU will cause it to boot loop once. This is just root sinking it's teeth into the system. Don't interrupt it. After the aforementioned loop, it'll take about ~5-8min to start up. This only applies to the very first boot. Afterwards it only takes ~10 seconds to startup.
7. Skip all the setup steps that require typing. This can be done after you install GoogleKeyboard.
8. Enjoy!
Special notes:
*Google play, and Google services are still installed. You can disable both if you want to. You must disable it as a device administrator under the security options first, or it will be grayed out.
*Syncing will not work, since it has also been removed.
*Device encryption and secure storage shouldn't work either.
*Chrome is still installed. It can also disabled. There is no way to remove it yet, as the 7.0 framework uses it for webview. I'm still searching for a workaround to save more space.
*Anything not listed, should be working perfectly. If something is broken, let me know. And please remember, that anything already listed is not a bug, it is intentional. If you have any issues with 3rd party apps, I will try to help you, though I make no promises.
*As always, anything that I make is free to use for other projects, public or personal, without my permission. No need to ask me, just do it! Credit is always appreciated, though not required.
Click to expand...
Click to collapse
You may want to try this Build I Built on TomeGJ7p's WIFI BUILD it's a good one I THINK YOU WILL LIKE IT !
https://mega.nz/#!aUlU3CiD!QERLRerFDA8497aKopbqZqZh-ZSTVfZ9GhfQQy2mBrs
PS if you like it you can use it to Build on you have mine an tomeGJ7p's Blessing !!
Spaceminer said:
There are no kernel tweaks. I have been trying to build a custom kernel from source for this, however, ubuntu/virtualbox are not playing nice with my hardware. (Ubuntu stops using my CPU completely after ~10min.) This is just a very bare bones stock Rom, with Trebuchet as a launcher. There are no special system tweaks added to it. Regarding that topic, I am working on tethering, it has been very difficult though. Samsung's smali files are a huge mess to work with. I can get the "you are not subscribed to this service" notification to stop, but tethering still won't start. Are you missing any options that would normally be available on stock? If so, I would definitely like to fix that ASAP.
Click to expand...
Click to collapse
This ROM is totally debloated. I went back and tried it again, very smooth, very fast but Contacts would not sync so I could not call anyone. Google account would not sync so no play store apk update from old account.Samsung account missing so no way for me to bring certain apks and utilities from stock ROM. Bare-bones android op. But I will keep it on my sd card.
PS
I just remembered those system apks that are missing that I need, I could have installed thru Titanium Bkup! [emoji846]
Sent from my SM-J727P using Tapatalk
is there anyway you can upload a copy with sync enabled and would it be possible to also use a modified or even stock touchwiz launcher?? and Magisk... If I could have sync magisk and touchwiz Id run this as my daily driver
JeepinxJosh said:
is there anyway you can upload a copy with sync enabled and would it be possible to also use a modified or even stock touchwiz launcher?? and Magisk... If I could have sync magisk and touchwiz Id run this as my daily driver
Click to expand...
Click to collapse
You can flash gapps for sync, I don't have the sync apps on hand or I would attach them. I've flashed pico without issue. I forget which one(s) has the sync apps, it's possible that all of them do. Magisk can be installed fairly easily. Grab Magisk v16. Open SuperSU, look in settings and choose full unroot. Select yes when asked to restore the stock boot image, and no to recovery. As soon as it reboots, hold Vol↑+Home to catch TWRP, then flash Magisk. As for Touchwiz, try installing the one in the attachments below. If it gives you any problems, let me know. If I update anything I will definitely be using Magisk, and I'll keep these options in mind for separate builds in the future.
Spaceminer said:
You can flash gapps for sync, I don't have the sync apps on hand or I would attach them. I've flashed pico without issue. I forget which one(s) has the sync apps, it's possible that all of them do. Magisk can be installed fairly easily. Grab Magisk v16. Open SuperSU, look in settings and choose full unroot. Select yes when asked to restore the stock boot image, and no to recovery. As soon as it reboots, hold Vol↑+Home to catch TWRP, then flash Magisk. As for Touchwiz, try installing the one in the attachments below. If it gives you any problems, let me know. If I update anything I will definitely be using Magisk, and I'll keep these options in mind for separate builds in the future.
Click to expand...
Click to collapse
Thanks man
I used this rom as the base for my gaming phone and then stripped it down to only system framework apps. If the latter were removed it would crash the phone. Anything I removed to get to that point, had minimal impact on space (fifty or so megs) and bootup times compared to a fully loaded phone (5 seconds). Spaceminer did an excellent job on this.
Video here of bootup comparison between two Galaxy J7 Perx, one with the Spacesung rom:
https://www.youtube.com/watch?time_continue=2&v=z9bcqwLVIAA
Is the Oreo stock ROM a battery chugger?
It's just me or anybody have experienced less stamina from their battery with the Oreo stock ROM even with all the de-bloat applied. Compared to the latest ARG2 Nougat it's almost halves the lifetime of the battery, even when on standby it consume a lot more.
ct760ster said:
It's just me or anybody have experienced less stamina from their battery with the Oreo stock ROM even with all the de-bloat applied. Compared to the latest ARG2 Nougat it's almost halves the lifetime of the battery, even when on standby it consume a lot more.
Click to expand...
Click to collapse
Have you tried turning off all the scanning features? Also in the dev options, the switch that keeps mobile data always on, is enabled by default. It's normally off in Nougat. Turning that off should help tremendously.
That being said, I do think Oreo is a battery hog, and I don't think there's any performance gain over Nougat. My best benchmarks with this phone are running Nougat (ARG2), debloated. My battery gives me 51-52hrs on Nougat, with 17-18hrs of that being screen on time. I plan on running Oreo this week to get a good comparison between them.