Hi i have lg g2 mini d620r and after changing the digitizer with 2 digitizers from ebay (5-10 euro each) when i press the power button to power on the phone the display just light up and the colors doesnt display anything and it shuts down.
In addition the controller cheap of the digitizers some times overheats.Please help if you can
Related
Hi,
I've got a SGS2 (GT-i9100) with a broken screen.
So i have to replace the screen/digitzer, is it possible to use the screen with 4 buttons (like the AT&T or SPRINT model) instead of the screen with 3 buttons.
Is it possible to use the 4 buttons keypad flex cable instead of the 3buttons keypad flex cable?
Hi
I'm hoping someone can help me. I have an Archos 80 G9 given to me as it wasnt charging, the connector had come off the board but I have re soldered it back and now charges fine.
However whilst I had the tablet was apart the touch screen no longer works, (whether a connector is broke or not I am unsure.) I am hoping someone has a picture of how the inside is supposed to look like or take a picture then I can begin the process of elimination.
Many Thanks
Hi,
I had a similar problem with an Archos, it turned out the screen just needed to be configured again
Hold power and volume up on boot till the white screen
Repair system
Force touch screen calibration
---------------
If this doesn't work check your connection on the two ribbons connected to te motherboard that is the only two connectors from screen to the board, the other two white and black wires are power and signal for wireless.
Good luck
good afternoon,
My xperia mini pro sk17a has a black screen.
Prior to this occurrence, I had a bad flex ribbon cable to the sliding keyboard. Screen would go black and come back with sliding keyboard motion. Opened the phone and found that the cable was torn. Decided to buy a replacement flex cable and installed it. Everything looked okay but...
Once I put the phone back together, no screen at all. If I turn the phone on, there is a very very faint amount of light present (you can only see this in the dark). The phone does boot, and the notification light will flash indicating new messages. I can call the phone and it will ring.
Hoping that this might be some sort of software reset, I tried flashing with the SUS software. No help, phone still behaves as described above. I'm guessing I need a new screen (maybe damaged it somehow taking the phone apart?), but has anyone gone through this and know of a solution other than more new hardware?
Thank you in advance for any help or feedback.
I think new flex cable is also damaged. You should check flex cable in another SK17.
So when I was replacing the screen and the frame on my phone I realized the power button had a flex cable, one gentle movement and now it broke. I was able to order a new one but it's been 3 weeks since I had the phone taken apart and I don't remember how the flex cable attaches to the frame so that the button can actually touch it? If somebody could pop off their case and take a picture and/or undo their power button and describe how it goes back together that would be great!
gabessdsp said:
So when I was replacing the screen and the frame on my phone I realized the power button had a flex cable, one gentle movement and now it broke. I was able to order a new one but it's been 3 weeks since I had the phone taken apart and I don't remember how the flex cable attaches to the frame so that the button can actually touch it? If somebody could pop off their case and take a picture and/or undo their power button and describe how it goes back together that would be great!
Click to expand...
Click to collapse
In my experience, the power flex cable is soldered to the motherboard usually. You may have either buy a soldering iron and do the most precise work you've ever done in your life or contact a phone store. Sorry if this wasn't helpful.
Good day to you guys..im using V30+ on andoid 7.1.2 and yesterday as my phone was charging i noticed 20 minutes later that my phone was not lighting anymore as if it was bricked...tried changing cables and charging adapter to test but it was completely off.All vol down+ power 20seconds techniques arent working...its not even being recognised by Pcs so im wondering if i have fried the motherboard somehow? is there any solution to such a problem or i have to buy a new motherboard? 930DS....it pains me to have a month old lifeless phone