Ok, i have unlocked bootloader, installed this rom https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342, added twrp via fastboot, rooted and so on.
Everything worked like a charm.
Than yesterday I got this update notification (from nplp 25.86-15 to nplp 25.86 -17-3; something about fixing notification sound - about 500mb). I thought what the hell lets try it - ended up in boot loop to recovery(twrp).
After that I installed this rom (odexed version) https://forum.xda-developers.com/moto-z/development/twrp-ported-to-moto-z-eu-version-t3470920.
Again I tried the update since it restored stock recovery - it went into the process and than reported some error.
Now, no matter what rom I install(those 2 and I tried cm14) phone acts messed up, it freezes and reboots when using it randomly and always reboots when screen goes to sleep 4 about 10 seconds.
I have also tried to install mm rom via twrp but ended up in recovery loop.
Any help is highly appreciated..
You need to flash back full stock ROM for your device. Had same issue. But that's if you are downgradable to MM roms
tafarelli said:
Ok, i have unlocked bootloader, installed this rom https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342, added twrp via fastboot, rooted and so on.
Everything worked like a charm.
Than yesterday I got this update notification (from nplp 25.86-15 to nplp 25.86 -17-3; something about fixing notification sound - about 500mb). I thought what the hell lets try it - ended up in boot loop to recovery(twrp).
After that I installed this rom (odexed version) https://forum.xda-developers.com/moto-z/development/twrp-ported-to-moto-z-eu-version-t3470920.
Again I tried the update since it restored stock recovery - it went into the process and than reported some error.
Now, no matter what rom I install(those 2 and I tried cm14) phone acts messed up, it freezes and reboots when using it randomly and always reboots when screen goes to sleep 4 about 10 seconds.
I have also tried to install mm rom via twrp but ended up in recovery loop.
Any help is highly appreciated..
Click to expand...
Click to collapse
i have the exactly same situation with my phone please help... i flashed MM rom but it didn't help it keeps rebooting every 5-10 minutes for no reason... will cyanogenmod 14.1 from this forum help?
Ok I have tried.
I flashed http://www.filefactory.com/file/6ht...ubsidy-DEFAULT_regulatory-03_CFC_EMEA.xml.zip using following commands:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash system system.img_sparsechunk.16
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem config carrier T-2
fastboot oem fb_mode_clear
Phone booted to mm stock (build number MPL 24.246-17) but I already had one reboot few minutes after.
Any suggestions?
kaxuna1 said:
i have the exactly same situation with my phone please help... i flashed MM rom but it didn't help it keeps rebooting every 5-10 minutes for no reason... will cyanogenmod 14.1 from this forum help?
Click to expand...
Click to collapse
I tried with cm but it's not helping.
Phone is stable so far after that initial self-reboot; I'll wait 4 couple hours and if it stays stable returning to n version because mm is too big of a downgrade.
If it continues rebooting, well I guess I'll just bang my head on the wall few times) cause I am out of ideas..
tafarelli said:
Phone is stable so far after that initial self-reboot; I'll wait 4 couple hours and if it stays stable returning to n version because mm is too big of a downgrade.
If it continues rebooting, well I guess I'll just bang my head on the wall few times) cause I am out of ideas..
Click to expand...
Click to collapse
i dont know what to do anymore i tried CM and it keeps rebooting...
do you have any more suggestions?
kaxuna1 said:
i dont know what to do anymore i tried CM and it keeps rebooting...
do you have any more suggestions?
Click to expand...
Click to collapse
Did you try what I posted above?
I have flashed nougat again after that and had one random reboot since. Don't like the fact that reboot happened but otherwise it feels stable and smooth.
Incomparable from what it was before-phone was unusable..
Ok now I have fully functional and stable Moto Z with rooted nougat (EU version).
Here is the receipt:
Download:
-(1) https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342 (mm rom)
-(2) https://mega.nz/#!ktxzwQrZ!UVHWD2B_ngkk7SiD9bWfVUhIfXkkdjpb2mgQhTrZIR8 (twrp img)
-(3) https://drive.google.com/file/d/0B7t82wiSkgOSdE5pbkVoZmNnLWM/view?usp=sharing (nougat modem)
-(4) https://mega.nz/#!5k5nCJAT!PUYLbJDGGyq3eZJMe38cl4tXG2vaXLIIID-wCdDjcYg (nougat rom)
-(5) superuser-r259.zip from https://superuser.phh.me/ (root zip)
Than from(1) fastboot as follows:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash system system.img_sparsechunk.16
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem fb_mode_clear
Boot up and put (4) and (5) to internal storage (idealy to sd card or usb via otg cable).
Than fastboot twrp from (2): fastboot flash recovery TWRP-Moto-Z.img
Than fastboot modem from (3): fastboot flash modem NON-HLOS.bin
Enter twrp recovery, advanced wipe dalvik, data, cache, format data; install n rom from (4); install root zip from (5)
Reboot
I have also freezed Motorola Update Services via Root Freezer Pro so that I don't get bothered with that type of potential problems in future.
Also, if you want to get rid of that annoying warning message (unlocked bootloader) upon booting download:
https://forum.xda-developers.com/attachment.php?attachmentid=3927285&d=1478365739
https://forum.xda-developers.com/attachment.php?attachmentid=3484630&d=1443097711
Unzip both on your pc, drag logo.bin onto MotoLogo_Injectorv1.1.bat, connect your phone in fastboot mode and follow onscreen instructions.
Hello @tafarelli what versión bootloader have your ?? Very thanks
Downgrade the Nougat at Mm ?
Regards
I never upgraded to nougat through OTA but from fastbooting this:
https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342
so I believe I still have mm bootloader.
If you have n bootloader than I guess(don't know) you will have to wait 4 stock nougat zip equivalent to (1) mm posted above..
tafarelli said:
Did you try what I posted above?
I have flashed nougat again after that and had one random reboot since. Don't like the fact that reboot happened but otherwise it feels stable and smooth.
Incomparable from what it was before-phone was unusable..
Click to expand...
Click to collapse
Yes I tried and it's been a 12 hours without reboot so thanks friend you saved me... I will try that nougat method you posted bello ???
---------- Post added at 11:45 PM ---------- Previous post was at 11:40 PM ----------
tafarelli said:
Ok now I have fully functional and stable Moto Z with rooted nougat (EU version).
Here is the receipt:
Download:
-(1) https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342 (mm rom)
-(2) https://mega.nz/#!ktxzwQrZ!UVHWD2B_ngkk7SiD9bWfVUhIfXkkdjpb2mgQhTrZIR8 (twrp img)
-(3) https://drive.google.com/file/d/0B7t82wiSkgOSdE5pbkVoZmNnLWM/view?usp=sharing (nougat modem)
-(4) https://mega.nz/#!5k5nCJAT!PUYLbJDGGyq3eZJMe38cl4tXG2vaXLIIID-wCdDjcYg (nougat rom)
-(5) superuser-r259.zip from https://superuser.phh.me/ (root zip)
Than from(1) fastboot as follows:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash system system.img_sparsechunk.16
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem fb_mode_clear
Boot up and put (4) and (5) to internal storage (idealy to sd card or usb via otg cable).
Than fastboot twrp from (2): fastboot flash recovery TWRP-Moto-Z.img
Than fastboot modem from (3): fastboot flash modem NON-HLOS.bin
Enter twrp recovery, advanced wipe dalvik, data, cache, format data; install n rom from (4); install root zip from (5)
Reboot
I have also freezed Motorola Update Services via Root Freezer Pro so that I don't get bothered with that type of potential problems in future.
Also, if you want to get rid of that annoying warning message (unlocked bootloader) upon booting download:
https://forum.xda-developers.com/attachment.php?attachmentid=3927285&d=1478365739
https://forum.xda-developers.com/attachment.php?attachmentid=3484630&d=1443097711
Unzip both on your pc, drag logo.bin onto MotoLogo_Injectorv1.1.bat, connect your phone in fastboot mode and follow onscreen instructions.
Click to expand...
Click to collapse
??????
tafarelli said:
I never upgraded to nougat through OTA but from fastbooting this:
https://forum.xda-developers.com/moto-z/development/android-nougat-moto-z-versions-t3506342
so I believe I still have mm bootloader.
If you have n bootloader than I guess(don't know) you will have to wait 4 stock nougat zip equivalent to (1) mm posted above..
Click to expand...
Click to collapse
Hello correct I have bootloader Nougat I do not understand what it means to expect 4 stcok nougat zip equivalent to 1 MM postado but back many thanks
regards
iron maiden said:
Hello correct I have bootloader Nougat I do not understand what it means to expect 4 stcok nougat zip equivalent to 1 MM postado but back many thanks
regards
Click to expand...
Click to collapse
It means when they put link for n factory image here
http://www.androidsage.com/2016/12/...ce-android-7-0-nougat-ota-and-factory-images/
(or elshewhere)
than you download it and fastboot stock n rom to repair your (I presume) damaged device.
tafarelli said:
It means when they put link for n factory image here
http://www.androidsage.com/2016/12/...ce-android-7-0-nougat-ota-and-factory-images/
(or elshewhere)
than you download it and fastboot stock n rom to repair your (I presume) damaged device.
Click to expand...
Click to collapse
Hello my Moto z is in nougat but I was wondering if you had bootloader Nougat and could return to forgive MM if I made you believe that it was in brick my phone sorry for my English there is no image factory of the last version? NPL25.86-17-3 " I installed this by adb sideload but I like to install the whole image thanks
regards
Related
hi
so i was trying to install a custom rom on my phone because i couldnt root it with supersu.zip and twrp but i accidentaly wiped internal storage with twrp and when i try to install the custom rom although it says its successful it doesnt copy the files and says"unmount of system directory failed no such voulume",im really confused now, what can i do? any help is appreciated
also the internal storage is always empty and nothing gets copied in it
macszxc said:
hi
so i was trying to install a custom rom on my phone because i couldnt root it with supersu.zip and twrp but i accidentaly wiped internal storage with twrp and when i try to install the custom rom although it says its successful it doesnt copy the files and says"unmount of system directory failed no such voulume",im really confused now, what can i do? any help is appreciated
also the internal storage is always empty and nothing gets copied in it
Click to expand...
Click to collapse
Use a SD card to flash the ROM using TWRP. Also check on TWRP that the internal and external memory are mounted.
Sent from my XT1650 using XDA-Developers mobile app
Or ADB Sideload. Simple stuff
macszxc said:
hi
so i was trying to install a custom rom on my phone because i couldnt root it with supersu.zip and twrp but i accidentaly wiped internal storage with twrp and when i try to install the custom rom although it says its successful it doesnt copy the files and says"unmount of system directory failed no such voulume",im really confused now, what can i do? any help is appreciated
also the internal storage is always empty and nothing gets copied in it
Click to expand...
Click to collapse
Don't panic! As long as you can get to recovery or bootloader you aren't bricked
I would restore to stock and try everything again.
Here's the stock US ROM https://mega.nz/#!vtVmgAoI!J1cZtlRi0FjRHbxIJGA5U8CLx6RwUWQjwrCbjzf_Naw
There's a link around here for stock EU ROM if you need that instead.
Use these commands from an ADB prompt:
fastboot flash partition gpt.bin
fastboot flash motoboot boot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
thx guys it worked with flashing stock rom
macszxc said:
thx guys it worked with flashing stock rom
Click to expand...
Click to collapse
I went through the exact same thing, wipe the whole system out, couldn't reboot even after flashing another ROM, then I figured, the boot.img must have gone missing, so I just fastboot flash boot boot.img (the one from within the stock ROM), then the phone booted
beaubin said:
I went through the exact same thing, wipe the whole system out, couldn't reboot even after flashing another ROM, then I figured, the boot.img must have gone missing, so I just fastboot flash boot boot.img (the one from within the stock ROM), then the phone booted
Click to expand...
Click to collapse
I'm ever more of the opinion that our Z is a device very hard to seriously brick...
Prfndhatrdofman said:
Don't panic! As long as you can get to recovery or bootloader you aren't bricked
I would restore to stock and try everything again.
Here's the stock US ROM https://mega.nz/#!vtVmgAoI!J1cZtlRi0FjRHbxIJGA5U8CLx6RwUWQjwrCbjzf_Naw
There's a link around here for stock EU ROM if you need that instead.
Use these commands from an ADB prompt:
fastboot flash partition gpt.bin
fastboot flash motoboot boot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
Hello, can you give me the EU stock rom, and please for god's sake don't give me this file factory link because this website is downloading slower to force me to buy their premium ****, thanks.
Hi guys, I've tried all the threads so far and have got no where. I unlocked my device and flashed a custom rom, that worked fine. I then noticed no way to go back to stock so I tried the odexed version with no luck. Now any rom I flash does not boot, just loops back to twrp. I would like to get as close to stock as possible even if it's another region. Has anyone had any luck on getting their phones booting after this?
I've tried flashing stock firmware from 6.0.1 then flashing ota through side load
Flashing other countries firmware (which always ends in fail messages)
I've tried multiple rom from the forum which just loop.
I've spent about 6 hours trying different combinations of recovery, boot and other images with no luck.
Any help is appreciated.
Sent from my iPhone using Tapatalk
criptix said:
Hi guys, I've tried all the threads so far and have got no where. I unlocked my device and flashed a custom rom, that worked fine. I then noticed no way to go back to stock so I tried the odexed version with no luck. Now any rom I flash does not boot, just loops back to twrp. I would like to get as close to stock as possible even if it's another region. Has anyone had any luck on getting their phones booting after this?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I have gotten stuck with bootloops a couple times now, for me re-flashing a backup or custom rom or custom kernel didn't fix it either. Keep in mind that you cannot go back to 6.0.1 once you have flashed 7.0, the bootloader won't allow it. I have had to flash back to a stock firmware from https:// firmware.center/firmware/Motorola/Moto%20Z/Stock/XT1650-03/ (remove the space after https:// ) and re-fastboot flash TWRP, re-root, and restore my Titanium Backups to get going again.
It's extremely helpful if you create a servicefile.bat to flash all the firmware parts in the right order. This is the one I made for flashing the RETMX 7.0 image (the main difference I noticed between different firmwares from that link is the number of sparsechunks, so add or delete lines as necessary. I'm sure all this info is available elsewhere, but I didn't manage to find it all in one shot. So I figured I would post it to help others out that are in the same boat. Also note that even though you are re-flashing the bootloader.img it does not re-lock your bootloader.
Code:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash system system.img_sparsechunk.16
fastboot flash oem oem.img
fastboot erase carrier
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
Copy the above text and paste it into a new text file and change the name to "servicefile.bat" without quotes (not servicefile.bat.txt), and drop it in with the extracted firmware files. Then either copy-paste your adb and fastboot files into that folder or drop all that folder's contents into your Users/*YOURNAME*/App Data/Local/Android/sdk/platform-tools/ folder. Or better yet, add "%USERPROFILE%\AppData\Local\Android\sdk\platform-tools" to your Path in your system's Environment Variables. The latter will make adb and fastboot work from any command prompt window, then you can just press shift+right-click in the folder that already has the firmware files and choose "Open command window here" and then just type servicefile.bat and press enter. Hope this helps! Good Luck and Happy Flashing!
HippieFlasher said:
I have gotten stuck with bootloops a couple times now, for me re-flashing a backup or custom rom or custom kernel didn't fix it either. Keep in mind that you cannot go back to 6.0.1 once you have flashed 7.0, the bootloader won't allow it. I have had to flash back to a stock firmware from https:// firmware.center/firmware/Motorola/Moto%20Z/Stock/XT1650-03/ (remove the space after https:// ) and re-fastboot flash TWRP, re-root, and restore my Titanium Backups to get going again.
It's extremely helpful if you create a servicefile.bat to flash all the firmware parts in the right order. This is the one I made for flashing the RETMX 7.0 image (the main difference I noticed between different firmwares from that link is the number of sparsechunks, so add or delete lines as necessary. I'm sure all this info is available elsewhere, but I didn't manage to find it all in one shot. So I figured I would post it to help others out that are in the same boat. Also note that even though you are re-flashing the bootloader.img it does not re-lock your bootloader.
Code:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash system system.img_sparsechunk.16
fastboot flash oem oem.img
fastboot erase carrier
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
Copy the above text and paste it into a new text file and change the name to "servicefile.bat" without quotes (not servicefile.bat.txt), and drop it in with the extracted firmware files. Then either copy-paste your adb and fastboot files into that folder or drop all that folder's contents into your Users/*YOURNAME*/App Data/Local/Android/sdk/platform-tools/ folder. Or better yet, add "%USERPROFILE%\AppData\Local\Android\sdk\platform-tools" to your Path in your system's Environment Variables. The latter will make adb and fastboot work from any command prompt window, then you can just press shift+right-click in the folder that already has the firmware files and choose "Open command window here" and then just type servicefile.bat and press enter. Hope this helps! Good Luck and Happy Flashing!
Click to expand...
Click to collapse
Dude, you are awesome. Worked like a charm. Was missing fastboot getvar max-sparse-size andbfastboot oem fb_mode_set plus I was flashing the modem after the chunks. Thanks again!
Sent from my iPhone using Tapatalk
Anytime! Glad I could help!
Hi guys,
Did not see anyone here on XDA who uploaded recently leaked OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
06.03.2019, THE NEWEST PPW29.116-20 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1Axk870qsui9w3TnnRQM9pt618CQ0CnHz
MIRROR: https://mega.nz/#!0ZUyTAqI!XXPwj0mcsGs0wLFwxwX8V0OeFXgCe-NXf-2VbDvr5Nc
OLDER BUILD: PPW29.116-16 FIRMWARE DOWNLOAD (RETAIL) - BE CAREFUL, IT BREAKS SAFETYNET ON EUROPEAN G6+ VARIANTS!
DOWNLOAD: https://drive.google.com/open?id=1F0SFwVyXgy3ZixL36W6xwxjqPJAwiDus
MIRROR: https://mega.nz/#!VJ8xEYRT!rb476WxlV099PVJrLwbFIr1Z3XNjo89sO5MU-HfPzMQ
OLDER BUILD: PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
--- If you don't want to erase all your phone data, use script from G6PlusFlashPieOfficial_NoErase.zip. This will upgrade your G6+ to Android Pie without erasing data. ---
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Screenshots.
PS. Digital Wellbeing installed via Magisk.
My brother has a Moto G6 Plus (bought in Europe) without root, will he be able to update it without loosing his data?
Thanks in advance guys.
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
cdfreak said:
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
Click to expand...
Click to collapse
Exactly like this.
@cyberon these commands are for your brother.
rafikowy said:
Screenshots.
PS. Digital Wellbeing installed via Magisk.
Click to expand...
Click to collapse
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
thump said:
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
Click to expand...
Click to collapse
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
smitharro said:
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Click to expand...
Click to collapse
which file i need to do the 2nd method and where can i download it?
rafikowy said:
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
Click to expand...
Click to collapse
Just rechecked and found my System Updates page no longer gives the "system integrity" error either. Still do get the "verity" error, but seems of no concern. Cool.
giorgis91 said:
which file i need to do the 2nd method and where can i download it?
Click to expand...
Click to collapse
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
smitharro said:
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
Click to expand...
Click to collapse
Will it wipe the phone ?
giorgis91 said:
Will it wipe the phone ?
Click to expand...
Click to collapse
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Suggestions
rafikowy said:
Hi guys,
Did not see anyone here on XDA who uploaded recently released OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin[PHP][/PHP]
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
I place an "m" in front of fastboot to use mfastboot.
Get the mfastbootv2 it's best for flashing this way imo
Good work buddy.
What's the command erase carrier for?
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
giorgis91 said:
Is that multilang or only in english?
Click to expand...
Click to collapse
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
giorgis91 said:
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
Click to expand...
Click to collapse
All stock ROMs are multilingual. So Italian shouldn't be a problem.
what dos this mane: Verity mode is set to disabled when you boot the phone up?
cdfreak said:
what dos this mane: Verity mode is set to disabled when you boot the phone up?
Click to expand...
Click to collapse
A short explanation:
dm-verity
transparent integrity checking for block devices
read error if block integrity check fails
try to recover damaged blocks (from Android 7.0)
useful for read-only partitions like*system
fundamental part of*verified boot*on Android
Verified boot
device software integrity based on hardware root of trust
Boot chain (simplified)
verify*bootloader*using a hardware root of trust
bootloader*verifies*boot*and*recoverypartition
kernel*verifies*system*partition
uses dm-verity for the integrity checks once execution has moved to the boot partition
Hmmm. For some reason I get "Server error" in play store. And autobrightness jumps up and down every few seconds. Have tried returning to oreo and reflashing/factory resetting to no avail On reteu.
EDIT: Hmm also get the error in oreo now Anyone know whats up? Came from Lineage 16.
OFFICIAL
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
COMMANDS
Code:
#MOTO G5
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
:fingers-crossed:
Hi takoa, thanks for your efforts. What are the differences with the firmware OPP28.85-16?
security update
Is this flashable in any cedric? I have a Moto G5 XT1675 italiani TIM brand (now with pixelexperience)
Any hope for capturing OTA update? I'd prefer to flash delta update instead of factory image
Hi. I’m currently on Android 7, build NPPS25.137-72-4, reteu channel.
I can directly flash this via fastboot to get 8.1? Thanks!
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
yilhernandez said:
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
Click to expand...
Click to collapse
Ah so it doesn’t matter which version am I using? I thought I’d need something for the reteu channel. Thanks for the confirmation!
moto g5
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
juan raul perez kana said:
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
Click to expand...
Click to collapse
Code:
https://mirrors.lolinet.com/firmware/moto/cedric/official/
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
TheFixItMan said:
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
Click to expand...
Click to collapse
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
vaibhavsirohi91 said:
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
Click to expand...
Click to collapse
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
TheFixItMan said:
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
Click to expand...
Click to collapse
I am getting these errors and i can't even access recovery
vaibhavsirohi91 said:
I am getting these errors and i can't even access recovery
Click to expand...
Click to collapse
Can't see any errors there but you may want to use an older fastboot version
TheFixItMan said:
Can't see any errors there but you may want to use an older fastboot version
Click to expand...
Click to collapse
Logical system not found......and i am using the latest zip from Retin folder (India)
vaibhavsirohi91 said:
Logical system not found......and i am using the latest zip from Retin folder (India)
Click to expand...
Click to collapse
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
TheFixItMan said:
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
Click to expand...
Click to collapse
Ok wait let me try
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Sorry, but I forgot to indicate that we have to eliminate the "m" from mfastboot.
or rename fastboot.exe to mfastboot.exe :good:
Hi, Android 9.0 for Albus is available here >> Direct Download <<
Just install with ADB Fastboot
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase carrier
fastboot erase DDR
fastboot reboot
Ps: Clean Install is recommend
(Retail version)
Enjoy!!!
I'AM NOT RESPONSIBLE IF YOUR CELLPHONE TURNS IN A BRICK AFTER THIS PROCESS
I think you have to do a twrp backup and then restore it.it's strange but works
Inviato dal mio GT-N5120 utilizzando Tapatalk
can we use this update for the Indian version of Z2play, software channel: RETIN. Bootloader: locked. if yes, then is there any problem with the mobile network?
JulioCeesarC said:
Hi, Android 9.0 for Albus is available here >> Direct Download <<
Just install with ADB Fastboot
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase carrier
fastboot erase DDR
fastboot reboot
Ps: Clean Install is recommend
(Retail version)
Enjoy!!!
I'AM NOT RESPONSIBLE IF YOUR CELLPHONE TURNS IN A BRICK AFTER THIS PROCESS
Click to expand...
Click to collapse
I blindly flashed the above mentioned pie rom on my moto z2 play xt1710-02 it flashed gpt and bootloader and failed the rest of the commands returned with errors
Now stuck at fastboot mode warning of startup failed @JulioCeesarC
Please help me get out of here
Bootloader is locked and i was at latest oreo update probably ods27.12-42-14
I also tried to flash above oreo image but it returns with error saying security downgrade
junejo46726 said:
I blindly flashed the above mentioned pie rom on my moto z2 play xt1710-02 it flashed gpt and bootloader and failed the rest of the commands returned with errors
Now stuck at fastboot mode warning of startup failed @JulioCeesarC
Please help me get out of here
Bootloader is locked and i was at latest oreo update probably ods27.12-42-14
I also tried to flash above oreo image but it returns with error saying security downgrade
Click to expand...
Click to collapse
try to install 8.0 again and after that unlock bootloader and try to install 9.0 again with bootloader unlocked
ghost.deathrider said:
can we use this update for the Indian version of Z2play, software channel: RETIN. Bootloader: locked. if yes, then is there any problem with the mobile network?
Click to expand...
Click to collapse
I recomend bootloader unlocked for this process
junejo46726 said:
Hi, Android 9.0 for Albus is available here >> Direct Download <<
Just install with ADB Fastboot
I blindly flashed the above mentioned pie rom on my moto z2 play xt1710-02 it flashed gpt and bootloader and failed the rest of the commands returned with errors
Now stuck at fastboot mode warning of startup failed @JulioCeesarC
Please help me get out of here
Bootloader is locked and i was at latest oreo update probably ods27.12-42-14
I also tried to flash above oreo image but it returns with error saying security downgrade
Click to expand...
Click to collapse
Before you unlock:
Try fastboot "Boot" TWRP, if you can, it might be possible to use one of the TWRP backups to fix your phone. There is another thread with TWRP backups of stock.
If successful boot, restore system partition last and separately.
XT1710-09 bootloader unlocked, installed 9.0 without any issue! Everything ok with twrp-3.2.3-0-albus recovery, but got bootloop trying to root with Magisk 20.0. Any tip?
kain83 said:
XT1710-09 bootloader unlocked, installed 9.0 without any issue! Everything ok with twrp-3.2.3-0-albus recovery, but got bootloop trying to root with Magisk 20.0. Any tip?
Click to expand...
Click to collapse
did you try cleaning your cache? I used 19.3.
kewlzter said:
did you try cleaning your cache? I used 19.3.
Click to expand...
Click to collapse
I didn't indeed. I'm gonna give it a try, thanks
EDIT: it works!! So installed 19.3 version and wiped cache/dalvik, then reboot. So far so good, many thanks!!
keeps saying waiting for device
hindraftv said:
keeps saying waiting for device
Click to expand...
Click to collapse
Phone is either not connected, or in the wrong mode.
Make sure the phone is in Boot Loader. Unplug and replug USB.
ghost.deathrider said:
can we use this update for the Indian version of Z2play, software channel: RETIN. Bootloader: locked. if yes, then is there any problem with the mobile network?
Click to expand...
Click to collapse
Yes, i tried both the US version and the Brazil version and the Brazil version works. I'm on Vodafone India and everything works perfectly fine on android pie.
However, after several trials and errors, I realized there are two commands that you shouldn't run when flashing pie on the Indian variant. They are:
1) flashboot erase userdata
2) flashboot erase carrier
Special Thanks to @Junior Passos
reallydan said:
Yes, i tried both the US version and the Brazil version and the Brazil version works. I'm on Vodafone India and everything works perfectly fine on android pie.
However, after several trials and errors, I realized there are two commands that you shouldn't run when flashing pie on the Indian variant. They are:
1) flashboot erase userdata
2) flashboot erase carrier
Special Thanks to @Junior Passos
Click to expand...
Click to collapse
Clean flash or dirty flash?
rayudu123 said:
Clean flash or dirty flash?
Click to expand...
Click to collapse
Clean flash
reallydan said:
Clean flash
Click to expand...
Click to collapse
Is it possible to flash indian pie version after release of pie in india??? Or do we face any problem in flashing??
Everything works except dark theme. Any fix?
kewlzter said:
Phone is either not connected, or in the wrong mode.
Make sure the phone is in Boot Loader. Unplug and replug USB.
Click to expand...
Click to collapse
It is connected.. I have Moto Z2 Play - Build Number OPSS27.76.12-42-13 (Baseband M8953P_50.59.07.96 ALBUS_NA_CUST_
are you able to provide step by step guide, if you don't mind
hindraftv said:
It is connected.. I have Moto Z2 Play - Build Number OPSS27.76.12-42-13 (Baseband M8953P_50.59.07.96 ALBUS_NA_CUST_
are you able to provide step by step guide, if you don't mind
Click to expand...
Click to collapse
Why sure...
Step 1: you get yourself a usb cable.
Step 2: you plug one end into your computer.
Step 3: plug the other end into your phone..
glad to help
kewlzter said:
Before you unlock:
Try fastboot "Boot" TWRP, if you can, it might be possible to use one of the TWRP backups to fix your phone. There is another thread with TWRP backups of stock.
If successful boot, restore system partition last and separately.
Click to expand...
Click to collapse
I also tried but fastboot saying can not load twrp @JulioCeesarC