About Lineage OS:
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Instructions:
1. Download the package
2. Factory reset if coming from another ROM.
3. Install ROM
4. Install GApps (optionally) [Recommended -> Open GApps (arm64) (7.1)]
What is CAF?
codeaurora.org
Code Aurora Forum, a Linux Foundation Collaborative Project, is a consortium of companies with projects serving the mobile wireless industry. The projects provide the tested code needed to bring innovative, performance optimized, open source based products to market and also serves as a staging area for code that is submitted to upstream projects such as the kernel and Android. Code Aurora Forum welcomes the participation of projects for multiple architectures. QuIC, as one of the members of Code Aurora Forum, provides support for Qualcomm hardware via the code it contributes to Code Aurora Forum. Code Aurora Forum also mirrors key upstream projects for use by the community
Downloads
LineageOs Folder
https://www.androidfilehost.com/?w=files&flid=143760
BUILD-INFO:
20170109:Welcome lineageOS,Spammers feature "VoLTE",
20170110:Fixed Camera issues, Tethering
20170121:Graphics libs Update,Fixed VoLTE issues
Reporting Bugs:
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
NOTE:
It can take little bit extra time to boot.
In beginning of ROM(First Boot)you will face lags but use it for for a while & after using for a while you can see a difference then ROM will not lag anymore.
Ignore red lines in twrp while flashing ROM (E:unknown command [log]
Do not flash the ROM as secondary in multirom it will loop
Credits:
Me for Developing
Karthick Mostwanted for everything
BoulZorDev
CAF
CyanogenMod | LineageOS
XDA:DevDB Information
LineageOS-14.1 For K5/Plus, ROM for the Lenovo Vibe K5 Plus
Contributors
chaubeyprateek, karthick mostwanted
Source Code: https://github.com/boulzordev/android_kernel_lenovo_msm8929
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: VoLTE Supported Modem
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2017-01-09
Created 2017-01-09
Last Updated 2017-01-09
Proof Of Calling
Go Here For Proof:-http://d-h.st/nHv7
Thanks!
First to do it
Congo!
Two Thumbs up for your Hard Work Man ??
chaubeyprateek said:
ROM Firmware Required: VoLTE Supported Modem
Click to expand...
Click to collapse
Does we need to flash this ROM from latest stockrom (volte update) to get working volte?
madakun said:
Does we need to flash this ROM from latest stockrom (volte update) to get working volte?
Click to expand...
Click to collapse
Yes
Sent from my MI 4W using Tapatalk
chaubeyprateek said:
Yes
Click to expand...
Click to collapse
Can you make flashable zip to install volte modem? If it is indeed possible
Nice one !
Can you make a pull-request on our repo about the VoLTE part? or link me your git device tree&vendor ?
So I would push it on others ROM like AOKP.
Report: only things that I found brightness of screen keep changing when auto brightness is off, and when is activated auto brightness don't adjust correctly to ambient, and cm file manager can't access sdcard, my phone model A6020a46, logs bellow.
gohaz0331 said:
Report: only things that I found brightness of screen keep changing when auto brightness is off, and when is activated auto brightness don't adjust correctly to ambient, and cm file manager can't access sdcard, my phone model A6020a46, logs bellow.
Click to expand...
Click to collapse
These are known cm bugs, for brightness bug use "brightness patcher" from play store
camera cant save pic closes with unknown error
Here is logs
for me Volte Not working at all there is no HD logo display on statusbar either, m using fresh installation wiped cache,data,system and then flash rom then reboot then flash gapps thats it, and there is no Volte for me in my device. , i m before AOKP ROM i just switched into this rom only because of the Volte support.
having A6020a46 3GB Variant , snap 616, 1080p FHD Indian user , sorry doesn't have logcat , as not in touch with lappy.
Regard,
Hardik
BHARDIK said:
for me Volte Not working at all there is no HD logo display on statusbar either, m using fresh installation wiped cache,data,system and then flash rom then reboot then flash gapps thats it, and there is no Volte for me in my device. , i m before AOKP ROM i just switched into this rom only because of the Volte support.
having A6020a46 3GB Variant , snap 616, 1080p FHD Indian user , sorry doesn't have logcat , as not in touch with lappy.
Regard,
Hardik
Click to expand...
Click to collapse
Just toggle enhance 4g mode on off
BTW on latest aokp camera is working (ie saveing pictures)
BHARDIK said:
for me Volte Not working at all there is no HD logo display on statusbar either, m using fresh installation wiped cache,data,system and then flash rom then reboot then flash gapps thats it, and there is no Volte for me in my device. , i m before AOKP ROM i just switched into this rom only because of the Volte support.
having A6020a46 3GB Variant , snap 616, 1080p FHD Indian user , sorry doesn't have logcat , as not in touch with lappy.
Regard,
Hardik
Click to expand...
Click to collapse
Disable enhanced 4g and enable again
For HD sign
Goto sim toolkit
Jio 4g
Home IMSI click on it
Sent from my MI 4W using Tapatalk
prasoonmehra said:
First to do it
Congo!
Click to expand...
Click to collapse
dev_harsh1998 said:
Two Thumbs up for your Hard Work Man ??
Click to expand...
Click to collapse
Thankuu guys
Sent from my MI 4W using Tapatalk
netship said:
camera cant save pic closes with unknown error
Here is logs
Click to expand...
Click to collapse
Here too.. Camara can't save pics.. Video is working perfectly.
dr.bathman said:
Here too.. Camara can't save pics.. Video is working perfectly.
Click to expand...
Click to collapse
I have figures it out it will be fixed in new build
Sent from my MI 4W using Tapatalk
chaubeyprateek said:
I have figures it out it will be fixed in new build
Click to expand...
Click to collapse
Great! Thanks!
chaubeyprateek said:
Disable enhanced 4g and enable again
For HD sign
Goto sim toolkit
Jio 4g
Home IMSI click on it
Sent from my MI 4W using Tapatalk
Click to expand...
Click to collapse
its working fine now thanks
Regard,
Hardik
Related
Before to start flashing
This is an UNOFFICIAL version of CM13, so this means that have bugs that i hope to fix soon. So use it carefully at your own risk. The most important thing to say, after flash this ROM,is ....
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Installation Guideline
Install the lastest version of TWRP
Power down your phone and go in recovery mode.
Copy the ROM file in your sdcard
Make a wipe data/factory reset
Install the zip you copied
Wipe cache
Reboot
What works
First Boot
Audio
RIL
SMS
SDCARD (only internal)
Leds
Accelerometer, Gyroscope, Magnetometer and other sensors
Touchpad (partial: wake up not works, so to test it set lockscreen expiration to 30 mins)
Bluetooth (partial: pairing not works)
Some else i'm testing
What not works
Camera
NFC
Light and proximity sensors
Anything else i will find and fix
Screenshots and Video
In the top of the page, section Screenshots.
Download
M4 Aqua ProjectMarshmallow Official Site
Uploading in this moment. You will see a post on my site!
Installation
Be sure to have my TWRP installed on your device. If you don't have it go to my site and download it (see download section).
Download and copy the ROM and GAPPS in the root of your SD
Boot in TWRP
Wipe your data (wipe data/factory reset in TWRP)
Install the ROM (Install... in TWRP)
Install GAPPS (see more information in the following GAPPS Section)
Reboot
GAPPS
You can download your GAPPS here. Be sure to download the ARM64 version for 6.0. The pico version is the minimal one (save more space).
Dev Channel
Please report any bug and issues on the Telegram Channel. The same channel could be used to contact me if you have some ideas to fix some existent bugs.
https://telegram.me/m4devs
XDA:DevDB Information
CyanogenMod 13, ROM for the Sony Xperia M4 Aqua
Contributors
tonystark88
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2016-04-06
Last Updated 2016-04-19
Awesome work! Thanks for keeping the development alive for this device.
One question, does the lock screen bug happen in this ROM too? Or was that 12.1 only?
Morph' said:
Awesome work! Thanks for keeping the development alive for this device.
One question, does the lock screen bug happen in this ROM too? Or was that 12.1 only?
Click to expand...
Click to collapse
Unfortunately also here. I've identified the cause of the problem and i'm trying to fix that.
Wow. Great work
Sent from my E2303 using XDA Free mobile app
Oh my god! Yes finally!
Just a question, will this have ota updates?
You are the best man!
Please just abandon cm12.1 and focus on cm13 so you will have more time to fix bugs. We wish soon ? we can use it as daily rom. Great job victory
Sent from my E2333 using XDA-Developers mobile app
diyar95 said:
Please just abandon cm12.1 and focus on cm13 so you will have more time to fix bugs. We wish soon we can use it as daily rom. Great job victory
Click to expand...
Click to collapse
The bugs that are currently in the 12.1 ROM persist through to the 13 ROM, so why would ditching one project help the other in anyway?
I wish other developers would help you with this. Getting working CM13 on this phone with more than decent hardware specs but crippled by Sony's software would be amazing.
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
diyar95 said:
Please just abandon cm12.1 and focus on cm13 so you will have more time to fix bugs. We wish soon ? we can use it as daily rom. Great job victory
Sent from my E2333 using XDA-Developers mobile app
Click to expand...
Click to collapse
Agreed
Morph' said:
The bugs that are currently in the 12.1 ROM persist through to the 13 ROM, so why would ditching one project help the other in anyway?
Click to expand...
Click to collapse
You right but if we have smooth cm13 I'm sure Cm12 will be rarely use and i think that sony working on marshmallow for 7 month they just can't make it so we need cm 13 and i can help with testing and give bug report
Sent from my E2333 using XDA-Developers mobile app
diyar95 said:
Please just abandon cm12.1 and focus on cm13 so you will have more time to fix bugs. We wish soon we can use it as daily rom. Great job victory
Sent from my E2333 using XDA-Developers mobile app
Click to expand...
Click to collapse
Morph' said:
The bugs that are currently in the 12.1 ROM persist through to the 13 ROM, so why would ditching one project help the other in anyway?
Click to expand...
Click to collapse
There are even more bugs in cm13 than cm12.1 like sdcard not working, so I think it'd be better if tony work in cm12.1 because the biggest issue is just the wake up screen; and we'd have nearly a daily driver.
Guys, the rom is on my site. Initially it reboots but after it works. Anyway is always an alpha
installs and runs fine on E2303. Thanks for the hard work :good:
zamdeh77 said:
installs and runs fine on E2303. Thanks for the hard work :good:
Click to expand...
Click to collapse
Noticed no worries ?
I want install this but need to be carefree for usage daily.
Sent from my E2303 using XDA Free mobile app
display wake up is short but if ne because of no longer ... and not xternal sdcard
ok problem with Google Play Store at some apps he says that they are not kompatieble with this version. then just goes with apk file
The problem of lock screen really is a "wakeup from deep sleep problem". This means that the device, when locked, shutdowns cores and suspends. The suspension is managed by an android lib (present in cm12.1 and cm13) called libsuspend that works fine for suspension but not when have to wake up the device (you can find a line of log that says "Error writing on sys/power/state : Device or resource is busy).
But i don't think is a lib problem, but i've to find a way to workaround the complete suspension or device that, in this way, busy for the lib.
Suggestions are always appreciated
Just to make the things clear: the development for the two ROMS is parallel. Infant both the ROMS actually have almost the same bugs. There is no waste of energy, just i'm trying to make the things work better than i can
In these days, maybe also tomorrow i will release a fixed version of alpha 1 for CM13 that not reboots at first time. I fixed the problem. In the next days i will update more on the lock screen problem if i've some news about that.
thanks for the rom
please just fix the camera and the sim card for the dual version E2333 soon as you can sir
Dev settings dont work. App settings was stopped
Wysłane z mojego E2303 przy użyciu Tapatalka
tonystark88 said:
Just to make the things clear: the development for the two ROMS is parallel. Infant both the ROMS actually have almost the same bugs. There is no waste of energy, just i'm trying to make the things work better than i can
In these days, maybe also tomorrow i will release a fixed version of alpha 1 for CM13 that not reboots at first time. I fixed the problem. In the next days i will update more on the lock screen problem if i've some news about that.
Click to expand...
Click to collapse
First u all must know guys stable cm12 willgive us good Base for cm13.
Tony u might need to build kernel previous I had xl and same problem might ask varun_chitre he will help u he fixed all cm bugs and gave xl new life
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
WHAT IS AOSP?
-AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
WHAT IS OMS?
More here : https://plus.google.com/u/0/communities/102261717366580091389
FEATURES
-SuperSU
-OMS Support
PS- Some basic features might be included from next builds. DONT ask for features.
BUGS
[/STRIKE]Camera doesnt work( will be fixed in next build) [/STRIKE]
-Mobile data doesn't work
[/STRIKE]Cant send messages, but can receive messages[/STRIKE]
CHANGELOGS
8/6/16
-Initial build
10/6/16
-Camera fixed(hopefully, havent tested it yet)
- Compiled with Linaro Toolchain for more smoothness
11/6/16
-Data fixed
7/8/16
- Camera fixed
-WiFi fixed
-OMS support added. LAYERS Won't work now.
(To know what is Substratum & how to use it, https://plus.google.com/u/0/communities/102261717366580091389 )
Click to expand...
Click to collapse
DOWNLOADS
AOSP-RRO -
https://www.androidfilehost.com/?w=files&flid=66392
GOOGLE APPS
OpenGapps - opengapps.org (Use packages for ARM, Android 6.0, Micro or Pico)
About GApps : Flash the GApps before the first boot. If not, a clean flash is recommended.
FLASHING
AOSP-OMS Clean Install
-Wipe System, Data, Cache, Dalvik (Internat storage OPTIONAL)
-Flash AOSP-RRO-rom.zip
-Wipe Dalvik & Cache
-Flash GApps
-Wipe Dalvik & Cache
-Reboot and Enjoy
ISSUES & REPORTS
- Report issues only if you use the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error with CatLog for example
Q&A - FAQ
Q : Is root access included?
A- Yes
Q : Where can I change the Quick Tiles and Status Bar ?
A- Long press the Settings icon in the notifications drawer.
You will have access to the SystemUI Tuner from Marshmallow.
CREDITS
-Kumajaya for kernel and device sources
- AOSP
-srisurya95 and akhilnarang for the AOSP-RRO repos
- Men_in_black007 and the AOSP-CAF Team
- @premaca & @ssawrav for camera and all other help
XDA:DevDB Information
[rom][aosp-rro][6.0.1][unofficial], ROM for the Xiaomi Redmi 2
Contributors
arpit_deshpande
Source Code: https://github.com/AOSP-RRO/manifest
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP-
Based On: AOSP
Version Information
Status: Beta
Created 2016-06-08
Last Updated 2016-06-08
Reserved
Reserved
wowwww Thanksss
Data fix for now - https://www.androidfilehost.com/?fid=24580943222145705 flash this zip in recovery.
Finally, we have AOSP rom on our device. What about the camera bug? Any plan to fix that?? Heheh. And, great thanks to you for build this rom!
Dyt199412syam said:
Finally, we have AOSP rom on our device. What about the camera bug? Any plan to fix that?? Heheh. And, great thanks to you for build this rom!
Click to expand...
Click to collapse
next build
Dyt199412syam said:
Finally, we have AOSP rom on our device. What about the camera bug? Any plan to fix that?? Heheh. And, great thanks to you for build this rom!
Click to expand...
Click to collapse
saurabh1234 said:
next build
Click to expand...
Click to collapse
As he said, it will be solved in next build. Will release it within a day.
New build up
-Camera fixed(hopefully, havent tested it yet)
- Compiled with Linaro Toolchain for more smoothness
PS- Forgot about fixing mobile data. Will do it at the earliest. Till then flash zip provided for fix
ROM- https://www.androidfilehost.com/?fid=24580943222146227
Data fix- https://www.androidfilehost.com/?fid=24580943222145705
arpit_deshpande said:
New build up
-Camera fixed(hopefully, havent tested it yet)
- Compiled with Linaro Toolchain for more smoothness
PS- Forgot about fixing mobile data. Will do it at the earliest. Till then flash zip provided for fix
ROM- https://www.androidfilehost.com/?fid=24580943222146227
Data fix- https://www.androidfilehost.com/?fid=24580943222145705
Click to expand...
Click to collapse
Bro what is datafix ? You didnt mention it on the first post, when mobilw data fixed, I will flash this rom, thanks for bringing aosp
Sent from my Xiaomi HM 2LTE-CU using XDA Labs
zieruchan said:
Bro what is datafix ? You didnt mention it on the first post, when mobilw data fixed, I will flash this rom, thanks for bringing aosp
Click to expand...
Click to collapse
Mobile data doesn't work. For it to work you need to flash a zip which I have provided.
zieruchan said:
Bro what is datafix ? You didnt mention it on the first post, when mobilw data fixed, I will flash this rom, thanks for bringing aosp
Sent from my Xiaomi HM 2LTE-CU using XDA Labs
Click to expand...
Click to collapse
In earlier builds, mobile data ddint work. Now I have (hopefully) fixed it in the new build released now. You can try and report back.
New build with data fixed up. Now no need to flash any other zip for data to work
PS- Can some1 flash it and report back?
https://www.androidfilehost.com/?fid=24580943222146535
Fast and fluid,
ii can send and receive sms
But.......
Camera not working
*#*#INFO*#*# only set 1 sim only
Please fix camera as soon as possible, because my gf forcing me to video call ��
Bro I have suggestion for this aosp rom, can you follow miui stock rom for mobile network management, I mean when I want to change preferred network for my data celullar (example sim2 for data), I dont need to set sim 1 for gsm only to get LTE on sim 2 , sorry for my bad english
Is it stable for daily use?
@arpit_deshpande my brother please use premacca new L kernel or xiaomi L official kernel, because kumajaya kernel I got slow charging, only 100ma, when I flash premacca new krnel i got 600-900ma. No offense for kumajaya and his fans
Is this CAF-optimized as it says in thanks?
---------- Post added at 03:24 AM ---------- Previous post was at 03:12 AM ----------
zieruchan said:
@arpit_deshpande my brother please use premacca new L kernel or xiaomi L official kernel, because kumajaya kernel I got slow charging, only 100ma, when I flash premacca new krnel i got 600-900ma. No offense for kumajaya and his fans
Click to expand...
Click to collapse
That would bring a hell lot of bugs, and a LOT of performance loss.
hardsonic said:
Is this CAF-optimized as it says in thanks?
---------- Post added at 03:24 AM ---------- Previous post was at 03:12 AM ----------
That would bring a hell lot of bugs, and a LOT of performance loss.
Click to expand...
Click to collapse
you didnt try it right? try the new kernel from premacca build using xiaomi L sources , and then reply me!
Are there any news, guys? I'm very interesred in your project.
zieruchan said:
Fast and fluid,
ii can send and receive sms
But.......
Camera not working
*#*#INFO*#*# only set 1 sim only
Please fix camera as soon as possible, because my gf forcing me to video call ��
Bro I have suggestion for this aosp rom, can you follow miui stock rom for mobile network management, I mean when I want to change preferred network for my data celullar (example sim2 for data), I dont need to set sim 1 for gsm only to get LTE on sim 2 , sorry for my bad english
Click to expand...
Click to collapse
YEP, I'm trying to fix the camera.
Solaris-x31 said:
Is it stable for daily use?
Click to expand...
Click to collapse
Depends, if you dont use camera too much, then you can flash it
zieruchan said:
@arpit_deshpande my brother please use premacca new L kernel or xiaomi L official kernel, because kumajaya kernel I got slow charging, only 100ma, when I flash premacca new krnel i got 600-900ma. No offense for kumajaya and his fans
Click to expand...
Click to collapse
Perhaps in the later stages
Kozoreyka said:
Are there any news, guys? I'm very interesred in your project.
Click to expand...
Click to collapse
Yes, there will be an update in 1-2 days.
NOTE: THERE'S A NEW THREAD HAS BEEN MADE. ANY UPDATES FROM THIS THREAD WILL BE MOVED TO THE NEW THREAD. THIS THREAD IS NOW CLOSED!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (MM), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
RIL (Calls, SMS, Mobile data) [Dual-SIM]
Wifi (connection, tethering, etc)
Bluetooth
Camera, video codecs
Storage (both internal and external)
Storages (internal, external, adoptable storage) (*)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Torch (flashlight)
WiFi-Direct
SELinux enforcing
New lz4 compressor/de-compressor for zram (new)
BUGS/Not working :
There're lots of bugs, but main are
No sound (beware making alarm while running this ROM), also Sound Recording doesn't work
Sound quality not too good when playing loud music or sound
FM radio app FC (due to missing libraries)
Screen recorder freeze the system (due to codecs, maybe)
Screen flickering on apps only (known as "strict mode"). Quick solution is pressing recents button, then return to the app. Currently, we can't disable it through Developer options
Distorting sound when using Bluetooth headset in call
WiFi-Direct does not work
WiFi auto-disconnect
AudioFX is not working
Battery drain caused by RIL
Cannot switch mobile data to other SIM without reboot
First time installing CyanogenMod 13 to your Galaxy V, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, be kind and give proper credits
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-source doesn't mean "out of respect"
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
BETA-1: Link
BETA-1Update1: XDA MF
BETA-2: XDA MF
BETA-3:
ROM XDA MF
BOOT.IMG XDA MF
BETA-4: Mirror MF
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Ace 4
Contributors
doesntexits, ngoquang2708
Source Code: https://github.com/ngoquang2708/android_device_samsung_vivalto3gvn/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.2
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 3
Beta Release Date: 2016-08-01
Created 2016-06-14
Last Updated 2016-08-28
CHANGELOG
ALPHA-1
Initial release
BETA-1
Fixed RIL, switched to beta builds
Switched to AOSP charging module
Fixed screen flickering
Fixed audio (thanks to @ngoquang2708)
BETA-2
Fixed screen flickering.
Fixed audio, now you can maximize your volume!
BETA-3
Fixed AudioFX
Fixed WiFi auto-disconnect
Working WiFi-Direct
No more "lock" at Setup Wizard
SELinux is now in Enforcing mode
BETA-4: Post #199
F.A.Q
Q: ROM startup too slow?
A: This device is just a single-core phone, so the first startup is super-duper slow, and some lags are expected during usage
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G313ML, SM-G313H
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can i use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Status 7 when installing the ROM?
A: Use TWRP recovery to install the ROM, as CWM is not supported yet
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
@adriansticoid
Your guessing is right. Here's our surprise
doesntexits said:
@adriansticoid
Your guessing is right. Here's our surprise
Click to expand...
Click to collapse
Thank you so much for this! Much appreciated. But I see that it is not suitable yet for daily use. Gonna wait until the camera and RIL bigs are fixed then I'll immediately switch to this.
Sent from my SM-T110 using XDA Labs
adriansticoid said:
Thank you so much for this! Much appreciated. But I see that it is not suitable yet for daily use. Gonna wait until the camera and RIL bigs are fixed then I'll immediately switch to this.
Sent from my SM-T110 using XDA Labs
Click to expand...
Click to collapse
Actually, the camera is usable, but sometimes during capture only, it lags (just for minimal duration, count by miliseconds). Video recording works just fine, but no sound
When RIL is fixed, we'll switch the ROM to beta builds, as it's a major issue for now
doesntexits said:
Actually, the camera is usable, but sometimes during capture only, it lags (just for minimal duration, count by miliseconds). Video recording works just fine, but no sound
When RIL is fixed, we'll switch the ROM to beta builds, as it's a major issue for now
Click to expand...
Click to collapse
Oh yeah one more thing. That sound bug. That one along with the RIL bug are the majors for now. Really man if you are just near I'll invite you to my house to have some snacks here. I hope hose are fixed soon.
Sent from my SM-T110 using XDA Labs
adriansticoid said:
Oh yeah one more thing. That sound bug. That one along with the RIL bug are the majors for now. Really man if you are just near I'll invite you to my house to have some snacks here. I hope hose are fixed soon.
Sent from my SM-T110 using XDA Labs
Click to expand...
Click to collapse
OK thanks, but I want my money back, as I've lost all of them to buy a new phone due to a funny reason: Don't know where I've kept them
Also because of that, I've a reason to have more time developing for Galaxy V, else I would doing for both phones
doesntexits said:
OK thanks, but I want my money back, as I've lost all of them to buy a new phone due to a funny reason: Don't know where I've kept them
Also because of that, I've a reason to have more time developing for Galaxy V, else I would doing for both phones
Click to expand...
Click to collapse
If only I can spare some, but I am only a student. Haha.
Sent from my SM-T110 using XDA Labs
Guys, I found our old running apps menu
It was in Developer options >> Running services
cmn guys, make this for sm-g313hu
gsrq said:
cmn guys, make this for sm-g313hu
Click to expand...
Click to collapse
Sorry, we don't have it
Btw, you've CM12.1 already right? Just use it
Fun fact: 6 months ago, I was acting like you too
This is great but, cm12 is still better for now Im excited for the final release. Im still waiting for your cm11 3rd final release.
Mc Code said:
This is great but, cm12 is still better for now Im excited for the final release. Im still waiting for your cm11 3rd final release.
Click to expand...
Click to collapse
Don't wait for that release. It's EOL (end-of-life) now
doesntexits said:
Don't wait for that release. It's EOL (end-of-life) now
Click to expand...
Click to collapse
What does that actually mean?
Sent from my SM-T110 using XDA Labs
adriansticoid said:
What does that actually mean?
Sent from my SM-T110 using XDA Labs
Click to expand...
Click to collapse
It means CM11 won't be having future builds anymore
doesntexits said:
It means CM11 won't be having future builds anymore
Click to expand...
Click to collapse
I see. CM11 is pretty stable now. CM13 should be more focused on.
Sent from my SM-T110 using XDA Labs
Great news guys! We have been working hard, and.... RIL now fixed!
We can make calls, send SMS, using mobile data for sure. Although that, we still having a great trouble: SystemUI and Phone FC
When that problem is fixed, we'll release BETA-1 for sure
Fun fact: Audio is dead, but we can still hear what people are saying in calls
I am confuse, that how can you upgrade your kernel.
Your device Kernel version was 3.10.17 and now its upgraded to 3.10.34
How is that possible.
I planned to port this ROM to higgs2g if the CM13 build process always fails.. Can I have permission to port this ROM? Thanks in advance
Sent from my higgs2g using XDA Labs
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
DOWNLOADS:
Click to expand...
Click to collapse
ROM: Link
Quick patches: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Created 2016-06-25
Last Updated 2016-07-14
Yehey! Hahaha.
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Updale the title bro. Put the Model Number.
AtomR said:
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Click to expand...
Click to collapse
See screenies for more
Only One Bug That would be great
doesntexits said:
See screenies for more
Click to expand...
Click to collapse
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
AtomR said:
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
Click to expand...
Click to collapse
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Dreamstar said:
Only One Bug That would be great
Click to expand...
Click to collapse
Yeah, that sh!tty bug
doesntexits said:
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Click to expand...
Click to collapse
Ahh. Ok. Well, I can surely live without changing fonts.
Title has been changed. And you also put G360HU @doesntexits.
JustFrame said:
Title has been changed. And you also put G360HU @doesntexits.
Click to expand...
Click to collapse
Also removed quotes in my signature too due to characters exceeds limits
if i in stock rom with rooted
and my kernal not updated to latest
can i flash this ??
and which recovery ?
thnks in advance
---------- Post added at 05:38 PM ---------- Previous post was at 05:31 PM ----------
please reply...am waiting for your reply
i hve CWM recovery
Thanks a lot. @doesntexits @Dreamstar
@AtomR
You promised me not ditching this phone right? So just keep up with it. There will be more fun with this phone
And I've made surprises to people by releasing 2 ROMs in a day, with upgraded version of Android
Sent from my SM-G360H using XDA Labs
For Gaps what should I choose? ARM, ARM64 etc??
wowwwwww suprb work dude......so nice so smooth thnks bro
I found another bug: Video recording doesn't work
Probably codecs thingy here
Sent from my SM-G360H using XDA Labs
Boy, i love you! Thank you!
choose ARM instead of ARM64
Original Tread: https://forum.xda-developers.com/ga...-0r40-crdroid-5-5-galaxy-j5-variants-t3939400
CrDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them! *Not responsible for any damage caused to your device*
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
RIL (in-call audio, messaging, data possibly)
Bluetooth (including audio)
WiFi
Audio (music, etc)
Camera (including video recording)
Flash
Sensors
GPS
Known issues:
NFC doesn't work
VoLTE
SE Linux is permissive
The charging info in the lock screen always shows 0m
FOLLOW INSTRUCTIONS CAREFULLY OTHERWISE YOU WILL GET ERROR :
Reboot to recovery (Use TWRP 3.2 which you can find here https://forum.xda-developers.com/gal...erino-t3768707 TWRP 3.3 has flash problems with the camera fix)
Wipe cache, dalvik cache, data (If you have done format instead of wipe reboot the recovery once else it will end up with issues/errors)
Flash ROM
Flash Camera fix
Flash Open Gapps (ARM - NANO (my recommendation) - 9.0)
Done- Reboot Now
Enjoy the clean ROM
Downloads:
ROM: https://mega.nz/?fbclid=IwAR3jt5Rnt...I!kuWHwPudC5TnTxaG5WWKZsS3w37TsxFhWO92p3f2JlA (PC downloadable through browser, for Android users, just install the app and it will let you download the file without an account)
Camera Fix: https://mega.nz/#!Os8XFI6a!qXQthCUQ-8sClQ4n3DoyrShojrojZkQ1NLew9Mu8H0c (remember, downgrade to TWRP 3.2)
Radio Fix (flash only if needed, I didn't test radio): https://mega.nz/#!7ptjBKia!PHtHyAfY_b5qWYG4UP6TJPHm4ielDzfp693lQprEe6M
GAPPS:
https://opengapps.org
CREDITS/THANKS TO... @vince2678, @minz1 and of course all other Galaxy-MSM8916 devs and contributors @jenslody for the Home button Wake-up fix @Zakaryan2004 @karthick mostwanted @latvianguy18
- ResurrectionRemix
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Special Thanks to:
@Francisco Funes
@latvianguy18 (Original j5 2015 ROM developer)
@bluedogerino
@Exodusnick for kernel
ROM information:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader / 3.2 TWRP
Based On: LineageOS
I have to admit this thread is much better than mine, congratulations!
Sent from my kylessopen using XDA Labs
Francisco Funes said:
I have to admit this thread is much better than mine, congratulations!
Click to expand...
Click to collapse
Thank you, it's all due to you!
NecromancerViper said:
Original Tread: https://forum.xda-developers.com/ga...-0r40-crdroid-5-5-galaxy-j5-variants-t3939400
CrDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them! *Not responsible for any damage caused to your device*
What's working :
RIL (in-call audio, messaging, data possibly)
Bluetooth (including audio)
WiFi
Audio (music, etc)
Camera (including video recording)
Flash
Sensors
GPS
Known issues:
NFC doesn't work
VoLTE
SE Linux is permissive
The charging info in the lock screen always shows 0m
FOLLOW INSTRUCTIONS CAREFULLY OTHERWISE YOU WILL GET ERROR :
Reboot to recovery (Use TWRP 3.2 which you can find here https://forum.xda-developers.com/gal...erino-t3768707 TWRP 3.3 has flash problems with the camera fix)
Wipe cache, dalvik cache, data (If you have done format instead of wipe reboot the recovery once else it will end up with issues/errors)
Flash ROM
Flash Camera fix
Flash Open Gapps (ARM - NANO (my recommendation) - 9.0)
Done- Reboot Now
Enjoy the clean ROM
Downloads:
ROM: https://mega.nz/?fbclid=IwAR3jt5Rnt...I!kuWHwPudC5TnTxaG5WWKZsS3w37TsxFhWO92p3f2JlA (PC downloadable through browser, for Android users, just install the app and it will let you download the file without an account)
Camera Fix: https://drive.google.com/file/d/1eB0...pY9SWgUpx/view (remember, downgrade to TWRP 3.2)
Radio Fix (flash only if needed, I didn't test radio): https://drive.google.com/file/d/12Bz...w?usp=drivesdk
GAPPS:
https://opengapps.org
CREDITS/THANKS TO... @vince2678, @minz1 and of course all other Galaxy-MSM8916 devs and contributors @jenslody for the Home button Wake-up fix @[email protected] [email protected]
- ResurrectionRemix
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Special Thanks to:
@Francisco Funes
@latvianguy18 (Original j5 2015 ROM developer)
@bluedogerino
@Exodusnick for kernel
ROM information:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader / 3.2 TWRP
Based On: LineageOS
Click to expand...
Click to collapse
If you are experienceing random Android reboots, try disabling AOD and wipe cache, Ambient Display seems a pain...
NecromancerViper said:
If you are experienceing random Android reboots, try disabling AOD and wipe cache, Ambient Display seems a pain...
Click to expand...
Click to collapse
Actually random reboots on pie are caused by "show taps" option on developer options
Sent from my j5xnlte using XDA Labs
Francisco Funes said:
Actually random reboots on pie are caused by "show taps" option on developer options
Click to expand...
Click to collapse
I tried porting Lineage 16.0 GO from J5 2015 but the server was down...
can someone share screenshots of what it looks like in terms of customization please
KRou705 said:
can someone share screenshots of what it looks like in terms of customization please
Click to expand...
Click to collapse
Screenshots are on the original thread.
I'd like to inform you that the camera fix download page ends with an error.
BlackAxiom said:
I'd like to inform you that the camera fix download page ends with an error.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1eB0WMgiBCL9pyyV0dUfFu2fpY9SWgUpx/view
Sent from my kylessopen using XDA Labs
BlackAxiom said:
I'd like to inform you that the camera fix download page ends with an error.
Click to expand...
Click to collapse
Sorry for the unconvinced, fixes migrated to MEGA instead of google drive, thanks for using my Port!
Im going to switch from ViperOS (since its outdated) to CrDroid today - i hope it will meet my expectations! Great many thanks for this rom, Necro!
---------- Post added at 09:56 AM ---------- Previous post was at 09:45 AM ----------
Isn't it possible to use encryption?
z-phoria said:
Im going to switch from ViperOS (since its outdated) to CrDroid today - i hope it will meet my expectations! Great many thanks for this rom, Necro!
---------- Post added at 09:56 AM ---------- Previous post was at 09:45 AM ----------
Isn't it possible to use encryption?
Click to expand...
Click to collapse
I do not know, I don't use encryption...
@NecromancerViper Okay...Well, im in need of encryption.
Could anyone take a looksie on that, because on Samsung Galaxy J5 2016 (FN) it gets to show the android-bot for a few secs before bugging out closing without any box'es showing, then reverting back to screenlock? Or if i can take any step to fix this myself with any patch or so? All tips & tricks are appreciated here!
Also camera is not working - can any patch available be applied to fix it on this ROM?
Great many thanks yet again @NecromancerViper!
z-phoria said:
@NecromancerViper Okay...Well, im in need of encryption.
Could anyone take a looksie on that, because on Samsung Galaxy J5 2016 (FN) it gets to show the android-bot for a few secs before bugging out closing without any box'es showing, then reverting back to screenlock? Or if i can take any step to fix this myself with any patch or so? All tips & tricks are appreciated here!
Also camera is not working - can any patch available be applied to fix it on this ROM?
Great many thanks yet again @NecromancerViper!
Click to expand...
Click to collapse
There is a camera fix on the thread, ambient display is broken and give random soft restarts, both ambient and Always on Display break the ROM, everything else works fine on my side
NecromancerViper said:
There is a camera fix on the thread, ambient display is broken and give random soft restarts, both ambient and Always on Display break the ROM, everything else works fine on my side
Click to expand...
Click to collapse
I tried applying it - but i don't know if i got the right one. ( https://drive.google.com/file/d/1eB0WMgiBCL9pyyV0dUfFu2fpY9SWgUpx/view is the one i downloaded )
Could you please point me to the right one? The one i got i non-working.
Best regards
z-phoria said:
I tried applying it - but i don't know if i got the right one. ( https://drive.google.com/file/d/1eB0WMgiBCL9pyyV0dUfFu2fpY9SWgUpx/view is the one i downloaded )
Could you please point me to the right one? The one i got i non-working.
Best regards
Click to expand...
Click to collapse
This should have been working, did you downgrade to TWRP 3.2?
Im running 3.0.3-0 TWRP. Should i upgrade to 3.2?
NecromancerViper said:
This should have been working, did you downgrade to TWRP 3.2?
Click to expand...
Click to collapse
z-phoria said:
Im running 3.0.3-0 TWRP. Should i upgrade to 3.2?
Click to expand...
Click to collapse
Yes of course, how did you even flashed the ROM with TWRP 3.0? The link to the 3.2 version is on my thread
NecromancerViper said:
Yes of course, how did you even flashed the ROM with TWRP 3.0? The link to the 3.2 version is on my thread
Click to expand...
Click to collapse
The link is 404. Think it will work with https://forum.xda-developers.com/ga...nt/recovery-twrp-3-1-2-blue-dogerino-t3768707 <- that one?
Thanks for helping out!
Best regards :good: