INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!
Related
Well with the fact that i just 'Beginner' in android -developer world i spent two days (read and search) to just know what the right steps to have unofficial rom . So this is not thread from professional it's just what i understand so far . (SORRY FOR BAD ENGLISH)
It's some simple Steps :
1) First you need to root your Device to have fully adminstrator . (This make you can execute terminal order from you and the apps)
2)After you get root install flash tool To do Setup 4 . (Rasher or Flashify)
3)You must UNlocked you bootloader . (So the new rom can edit your boot process)
4)Install custom Recovery [CWM]or[PHILZ]or[TWRP]. (This make you can do zip install from external card)
5)Get your rom download and copy to your external card.
NOW YOUR READY
OK Now my guide is for LG G2 MINI (D618)
The custom rom is [ROM][5.1.1][D618/D620] Cyanogenmod 12.1 Stable
And my phone have OFFICIAL android 5.0.2 lollipop
1) ROOT : FOLLOW THIS GUIDE
http://forum.xda-developers.com/g2-mini/development/root-root-g2-mini-lollipop-t3123652
If it not success . do factory reset and start the root again but this time (don't setup superSU from store and don't restart your phone and IT's su Not Su) this should success .
2) DOWNLOAD THE FLASH TOOL FROM PLAY STORE AND KEEP IT
3) BOOTLOADER : FOLLOW THIS GUIDE (YOU MUST TAKE BACKUP FOR YOUR PHONE FIRST)
http://forum.xda-developers.com/g2-mini/development/bootloader-d620-d618-t3127819
4) CUSTOM RECOVERY : FOLLOW THIS GUIDE (CWM SUCCESS WITH ME) (JUST FLASH .IMG FILE WITH SETUP NUM (2))
http://forum.xda-developers.com/g2-mini/development/recovery-lg-g2-mini-d618-v10c-t2854493
5) DOWNLOAD THE FILE YOU NEED FROM HERE AND COPY TO EXTERNAL CARD AND FOLLOW Installation :
http://forum.xda-developers.com/g2-mini/development/rom-cyanogenmod-12-1-stable-t3175833
NOW IF THIS SETUP'S SUCCESS THE HARD PART IS OVER.
6) Now reboot into recovery mode (you will find this in Flash tool)
in recovery mode you need just two things (WIPE AND INSTALL)
7)CHOOSE "Wipe" CACHE, DATA and SYSTEM (THIS WILL DELETE YOUR PERSONAL DATA AND SETTING AND EVERY THING)
8)CHOOSE INSTALL ZIP FROM EXTERNAL CARD AND CHOOSE FIRST KK_BOOTSTACK_D618_1.1.ZIP THEN cm-12.1-20150828-UNOFFICIAL-g2m.ZIP
9) RECOMMENDED TO INSTALL GAPPS (tk_gapps-modular-pico(uni)-5.1.1-20150824-signed.ZIP)
10) NOW YOU HAVE DONE .. REBOOT YOUR PHONE AND IT WILL DO SOME INSTALL FOR ABOUT 10 MINUTE AND YOU WILL SEE SETTING SETUP ON THE SCREEN
11)F YOU HAVE unstable SIM signal JUST GO TO RECOVERY AND WIPE ONLY CACHE IT WILL BACK TO NORMAL.
THIS IS MY experience ON MY G2 D618 I DON'T KNOW ABOUT OTHER PHONE'S
THANK YOU XDA AND XDA-DEVELOPER'S FOR YOUR HARD WORK .
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
Make sure that Unlock bootloader process success i have this problem to and i Discovered that the unsuccess unlocking bootloader operation the Responsible for this error as i understand.
Flash custom recovery process deleting the original recovery but because of unsuccess unlocking bootloader Rasher Deleting original recovery but he cannot install the new custom recovery so what i do in this case .
1)Download official android lollipop from here (chose your country ) its KDZ File and flash with LG Flashtool 2014 Here
Now do the setup from the First setup .. and setup Num 2 i just mean Flash Custom Recovery File (Dont use TWRP Use CWM with Flashify .. Rasher didn't success with me ) Hope you make it
snoK123 said:
Thank you very very much for this great explanations!!!
Tried to flash custom recovery with Rashr after unlocking bootloader. Tried CWM, Philz and TWRP and always ended up with attached screen.
What do you think the mistake is? And what do you mean with setup Num 2? Do you mean kernel flash in Rashr?
Thank you!
Click to expand...
Click to collapse
this is the stock android recovery that means that you didn't or couldn't flash a custom recovery
make sur you extracted the zip file and flashed the recovery.img with flashify
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
snoK123 said:
Hmmm, did everything exactly like you've written until flashing recovery. Now I'm stuck with attached screen when entering recovery...
Any idea?
Thank you!
Click to expand...
Click to collapse
this is the fastboot screen
the recovery you tried to flash is corrupt make sur the file isn't corrupted and the that is matching your device
i think your device is d620r and your trying to flash the one from the thread [RECOVERY][CWM][PHILZ][TWRP] G2 Mini D618
if you can boot into system reflash the matching recovery TWRP for your device if you can't connect your phone to pc
use fastboot to flash the recovery
http://forum.xda-developers.com/g2-mini/development/recovery-twrp-2-8-3-0-recovery-lg-d620-t2990196
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
don't know what's wrong !! if bootloader was locked you will have a security error on boot not the fastboot screen when enterig to recovery maybe you're doing the wrong combination to access recovery try with an application or with flashify or rasher to reboot to recovery
snoK123 said:
Thank you very much for your reply, Tried to flash the linked TWRP with Rashr, same here... ...
Click to expand...
Click to collapse
give us screen shot of (about software) in your phone
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
xander33 said:
I All, i lost two days trying to flash the recovery with rashr ....
With flashify everything was ok!!!
So please try with it
At least on my case the problem was just the app rashr that does not work on my phone
Click to expand...
Click to collapse
The same happen with me so I put the general tool for all users and I mentions the successful tools that work with me
Sent from my LG-D618 using XDA Free mobile app
Hi,
My friend gave me this phone to update the rom, but I'm facing a problem. Device was rooted, recovery is installed, but some really old one - it doesn't even say what kind of recovery it is. So I read that I need to update to TWRP 2.8.4.0 rev.2. Tried flashing it with TWRP apk, but after choosing it and hitting install, it reboots and goes into old recovery and I can't install new TWRP. Then I tried installing it with this guide: http://rootoreviews.com/root-Lenovo-P780-install-twrp-custom-recovery , but I'm getting error: partition 'recovery' not support flash.
Lastly I tried with SP Flash Tools, but I can't install drivers. After holding red button 2 seconds and plugging cable there is no device unknown to install drivers or any kind of device looking like this phone.
Can anyone help ?
Thanks
gunlok said:
Hi,
My friend gave me this phone to update the rom, but I'm facing a problem. Device was rooted, recovery is installed, but some really old one - it doesn't even say what kind of recovery it is. So I read that I need to update to TWRP 2.8.4.0 rev.2. Tried flashing it with TWRP apk, but after choosing it and hitting install, it reboots and goes into old recovery and I can't install new TWRP. Then I tried installing it with this guide: http://rootoreviews.com/root-Lenovo-P780-install-twrp-custom-recovery , but I'm getting error: partition 'recovery' not support flash.
Lastly I tried with SP Flash Tools, but I can't install drivers. After holding red button 2 seconds and plugging cable there is no device unknown to install drivers or any kind of device looking like this phone.
Can anyone help ?
Thanks
Click to expand...
Click to collapse
Hi. I have read your message and you have to do this:
First Tutorial.
I see that you have installed allready one custom recovery.
1. Download TWRP from here: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
2. After download putt the zip file to your root of your internal memory
3. Reboot to your current recovery and install twrp
4. After install power down your phone.
5. Start your phone again with all buttons pressed: Power + Volume up and Volume down.
6. Go to TWRP and do a full backup of your current firmware.
7. After full backup you can install any custom firmware you want.
8. I reccomend latest MIUI from AndreyZO, Mirror 9.
9. Good luck. If you have other questions write here.
Seccond Tutorial
1. Look in this post: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
2. Download TWRP_v2.8.4.0 rev2 and read twice that tutorial
3. Go to this post and download SP Flash Tool: https://drive.google.com/drive/folders/0B_B98oK4DpK1S1l2bXRkTGxhVFk
4. Go to this post and download latest stock KITKAT and drivers: http://forum.xda-developers.com/lenovo-p780/development/p780-row-s226-flash-flashtool-t2909202
5. When you install the drivers in windows 8,10 you must disable driver signing. Look on youtube.
6. Now you must flash new system.
7. Unpack stock Kitkat firmware.
8. Unpack TWRP.
9. Go to firmware folder and delete recovery.img and replace with TWRP
10. Flash the firmware.
11. After flash boot at least once. If by any chance your phone is Lenovo P780 speed edition, after this flash will not start. This means that you need the latest preloader. Download it from here: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-chineese-speed-version-t2874161
12. After flash reboot in recovery by powering off the phone and start with all buttons pressed: Power + Volume up and Volume down.
13. Now you have last stock firmware with custom recovery installed. Go to TWRP and do a full backup of your current firmware.
14. After full backup you can install any custom firmware you want.
15. I reccomend latest MIUI from AndreyZO, Mirror 9.
16. Good luck. If you have other questions write here.
Tried to flash from this weird recovery, but I get error - look at pic.
I didnt flash this recovery, it must've been flashed by seller in my country. It looks like he way buying chinese versions and then flashing modified rom with polish language (very poorly translated).
Problem with sp flash tools is, I cant install usb driver. When Im in download mode I get the sound that usb device has been plugged in and after 1 second i get the unplugging sound. There is no unknown device in Device Manager, do I am not able to update the driver :/
gunlok said:
Tried to flash from this weird recovery, but I get error - look at pic.
I didnt flash this recovery, it must've been flashed by seller in my country. It looks like he way buying chinese versions and then flashing modified rom with polish language (very poorly translated).
Problem with sp flash tools is, I cant install usb driver. When Im in download mode I get the sound that usb device has been plugged in and after 1 second i get the unplugging sound. There is no unknown device in Device Manager, do I am not able to update the driver :/
Click to expand...
Click to collapse
That one is stock recovery. Proceed with the seccond tutorial.
One more question before I try to flash, I got CN verision, u answered to me in different thread:
stympy said:
Hi. Your layout is CN.
Look if you have custom recovery TWRP Installed.
If you have TWRP installed you can go to this post and install latest MIUI MINOVO.
Good luck.
Click to expand...
Click to collapse
So is that ROW Kit Kat ok for me ?
Yes it is ok as base firmware.
After you flash and install TWRP, you can install any custom firmware.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Ehh now in SP flash tool I get this error... I followed all steps :/
gunlok said:
Ehh now in SP flash tool I get this error... I followed all steps :/
Click to expand...
Click to collapse
Try version 5 and see what happens.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
gunlok said:
Ehh now in SP flash tool I get this error... I followed all steps :/
Click to expand...
Click to collapse
Did you have any success with SP Flash tool v5?
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Hi,
Sorry for delay, wasn't at home during weekend. Im flashing right now, but I had to use "Format all + download", cause only download showed error: "PMT changed for the ROM it must be download". Now I can flash the ROW version of custom rom or CN ?
Hmm I have still stock recovery not TWRP, although I replaced it with TWRP. File size matches perfectly...
Ok, worked but I flashed it with ROW version of recovery, making backup at the moment.
Got an error installing minovo_NOTE_6.12.1_ROW.zip, couldn't boot into recovery after so I decided to flash via SP Flash Tools one more time. After that booted into recovery and once more I have stock recovery xD I'm in serious WTF mode right now
Hmm I think I screwed something. After booting Kit Kat it says "Invalid imei" :/ I guess I will have to restore with MTK droid tools ? Can you guide me through that ?
gunlok said:
Hi,
Sorry for delay, wasn't at home during weekend. Im flashing right now, but I had to use "Format all + download", cause only download showed error: "PMT changed for the ROM it must be download". Now I can flash the ROW version of custom rom or CN ?
Hmm I have still stock recovery not TWRP, although I replaced it with TWRP. File size matches perfectly...
Ok, worked but I flashed it with ROW version of recovery, making backup at the moment.
Got an error installing minovo_NOTE_6.12.1_ROW.zip, couldn't boot into recovery after so I decided to flash via SP Flash Tools one more time. After that booted into recovery and once more I have stock recovery xD I'm in serious WTF mode right now
Hmm I think I screwed something. After booting Kit Kat it says "Invalid imei" :/ I guess I will have to restore with MTK droid tools ? Can you guide me through that ?
Click to expand...
Click to collapse
Hi. Look on this location:
http://forum.xda-developers.com/showthread.php?t=3174563
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Sorry for annoying you once again. When I try to flash anything in TWRP I get error "unable to mount /system". I read that it could mean that system partition might have incorrect file system. What is the standard one for p780?
It happens when I flash the stock KK with TWRP recovery, then I want to flash Superuser. I need superuser to use MTKdroidtools to restore IMEI.
My biggest problem is when I boot the Stock KK after flashing and power OFF, I can't boot to TWRP recovery. Instead it's booting stock recovery. Only way to to boot to TWRP or any custom recovery (tried CWM) is only after fresh flashing with SPflashtools, but I can't flash superuser. If I format /system I can install superuser (no error unable to mount /system), but I have no system to boot to use MTKdroidtools.
This phone is driving me crazy....
UPDATE:
Ok i managed to restore everything, thanks for help. Can't flash custorm rom still but im making different thread.
help me!!
I recently failed
Me too trying but got error even i think i brick my camera :'(
youvedone said:
I recently failed
Click to expand...
Click to collapse
I deleted all stuff.. and started again with marsh..
More Infos please?
Is your bootloader already unlocked?
What is with your camera?
How did you tried?
Which error did you get?
1. Make your boot image compatible with nougat rootkernel tool (and flash it)
2. Flash twrp 3.0.2.0 to recovery partition
3. boot into twrp and flash systemless supersu zip or flash magisk with superuser
4. profit
[email protected] said:
1. Make your boot image compatible with nougat rootkernel tool (and flash it)
2. Flash twrp 3.0.2.0 to recovery partition
3. boot into twrp and flash systemless supersu zip or flash magisk with superuser
4. profit
Click to expand...
Click to collapse
"1. Make your boot image compatible with nougat rootkernel tool (and flash it)"
How do you do that? (step by step)
NakiKiwiNZ said:
"1. Make your boot image compatible with nougat rootkernel tool (and flash it)"
How do you do that? (step by step)
Click to expand...
Click to collapse
Use latest TWRP for this (3.1.0.0). You can find the download in Sony Cross Device General section.
1 Install it to recovery partition (fastboot flash recovery twrp3100forz5c.img)
2 Boot into twrp (hold power and volume - till the phone vibrates)
3 Backup boot partition with twrp
4 Get boot.emmc.win from twrp backup folder
5 use this file in rootkerneltool
6 follow rootkerneltool guide
[email protected] said:
Use latest TWRP for this (3.1.0.0). You can find the download in Sony Cross Device General section.
1 Install it to recovery partition (fastboot flash recovery twrp3100forz5c.img)
2 Boot into twrp (hold power and volume - till the phone vibrates)
3 Backup boot partition with twrp
4 Get boot.emmc.win from twrp backup folder
5 use this file in rootkerneltool
6 follow rootkerneltool guide
Click to expand...
Click to collapse
is there a noob guide somewhere how to actually do each step ?
Montago said:
is there a noob guide somewhere how to actually do each step ?
Click to expand...
Click to collapse
If you wanted to use 32.3.A.0.372 with this method - https://forum.xda-developers.com/z5-compact/general/recovery-nougat-7-0-android-bootable-t3609358 - you can still use the same recovery image to flash to the recovery partition - just use the kernel for 32.3.A.0.372 - the bootloader kernel is the same for 32.3.A as it is for 32.4.A
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Edit
Finally I was able to make the device recognize the stock recovery, follow this post
https://forum.xda-developers.com/ze...ide-how-to-install-updates-twrp-root-t3818561
mee tooo
Fluizx said:
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Click to expand...
Click to collapse
if you had a link of the rom . can you please help me too. Right now my phone is same as yours . Really need your help.
Fluizx said:
Please someone with android 8 or 9 can provide a full system backup for twrp installation?
I installed twrp on my device, then I put the original recovery but now my device does not go into recovery mode, it only enters fastboot mode "CSC" thanks to this I can not format the device and I can not install the system, so if anyone can and has twrp make a backup of the system and make it available to me please, thank you
Click to expand...
Click to collapse
I did not understand. If you can only enter fastboot mode, why do you need a TWRP installable rom? You only need to install raw firmware via ASUS Flash Tool/fastboot.
Follow the tutorial below to install Nougat on your phone, then you can update it normally
https://www.asus.com/zentalk/thread-217685-1-1.html
KaMyKaSii said:
I did not understand. If you can only enter fastboot mode, why do you need a TWRP installable rom? You only need to install raw firmware via ASUS Flash Tool/fastboot.
Follow the tutorial below to install Nougat on your phone, then you can update it normally
https://www.asus.com/zentalk/thread-217685-1-1.html
Click to expand...
Click to collapse
This does not work, simply the original bootloader does not work anymore I put the original boot.img it does not enter recovery.
But I got it using the newer twrp on it I was able to reinstall the rom directly from twrp was the only way I could to reinstall the system.
Download the system from the asus site normally and install the newer twrp with twrp go install zip and install rom normally
TWRP > https://drive.google.com/drive/folders/1s6O3RMVqNe3K-mFzzo2k5vFZByABi0YF
Fluizx said:
This does not work, simply the original bootloader does not work anymore I put the original boot.img it does not enter recovery.
But I got it using the newer twrp on it I was able to reinstall the rom directly from twrp was the only way I could to reinstall the system.
Download the system from the asus site normally and install the newer twrp with twrp go install zip and install rom normally
TWRP > https://drive.google.com/drive/folders/1s6O3RMVqNe3K-mFzzo2k5vFZByABi0YF
Click to expand...
Click to collapse
Where did you get this newer twrp from?
KaMyKaSii said:
Where did you get this newer twrp from?
Click to expand...
Click to collapse
I caught this post
https://forum.xda-developers.com/ze.../recovery-twrp-3-1-1-0-ze554kl-t3692195/page7
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO https://youtu.be/30gFxuyiFqU
Credits and Thanks to:
@Darkcannibal and @santhoosh
redymedan said:
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO
Credits and Thanks to:
@Darkcannibal and @santhoosh
Click to expand...
Click to collapse
Nice jo3
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL
how to put twrp on my A50 , please
Jhon177 said:
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL ?
how to put twrp on my A50 , please
Click to expand...
Click to collapse
Let me know your A50 model number and region?
redymedan said:
Let me know your A50 model number and region?
Click to expand...
Click to collapse
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Jhon177 said:
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Click to expand...
Click to collapse
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
redymedan said:
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
Click to expand...
Click to collapse
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Jhon177 said:
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Click to expand...
Click to collapse
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
twrp works on Baseband: A505FXXU5BTE1.
BuildNumber: QP1A.190711.020.A505FDDS5BTF2
Thank You
redymedan said:
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
Before install multidisabler, you must format data first... I think you missed a step, please check it again
redymedan said:
Before install multidisabler, you must format data first... I think you missed a step, please check it again
Click to expand...
Click to collapse
Hi redyman , just info ??
I am suscsess for evrything about twrp on my device A50.
About multidisabler samsung.
I try direct Reboot to system
?? violaaaaaa my A50 start SETUP PHONE.
Without installing Multidisabler. And my phone runing normal nice and greattttt
Maybe on lattes firmaware no need Flash multidisabler.
Btw thank alottttts to Redymedan , for attention reply my question until sucsess flash twrp for my A50 ?? terimakasih banyakkkk bosku
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
gSingh05 said:
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
Click to expand...
Click to collapse
That is long story I think, as I am not wrong in after android 8 or 9 above, It caused partition structure. In android 8 above partition structure has changed, we can not install magisk manually in TWRP anymore, we must patch it in recovery.img, repack recovery.img, boot.img and vbmeta.img to be flashable tar file then flash it. It looks no solution until now..
HELP
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
Please show me the error message or screenshot of its... I did not face any issue when install multidisabler..
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
For me. Done. I think if you use lattest firmware / juni security patch.
No need samsung multidisabler.
On twrp
Just format data -
Swipe to factory reset
Reboot to recovery.
Install magisk manager done. ?
That my experience.
( that also true until now I am not succes to flash multidisabler ,but everything work fine without multidisabler ,
bener bro gak bisa . Tulisannya error merah saat flash zip sd card )
BOHEMIA840 said:
@redymedan
Click to expand...
Click to collapse
Not tested, I am not sure it will work.. but you can try to test it
I am using 3.3.1.3. The process is the same? even if I already have the twrp?
i'm having problem to boot in twrp it doesn't open i tried every way above and success once or twice only and after i granted su i rebooted then i lost su again