Bricked Honor 7 After flash superSU phone doesn't start - Honor 7 Q&A, Help & Troubleshooting

Hi all,
I unblocked my honor 7 PLK-L01 okay,
but when i tried to flash the superSU, to get rooted, after reboot, it never wants to reboot.
I tried:
1- I tried like the manual saying, (press volumeUp+volumeDown+power), then after the first image, i release the power and keep up+down presses,
But instead of going to recovery, the phone keep restarting.
2- i tried to press volumeUp+power, then keep pressing on volumeUp, but also the phone keep restarting,
How ever I can go to bootloader mode, if i press voluemDown.
but when i flashed another twrp, nothing change.
Can someone help please, the phone even stuck on the starting, and can't be recognized as mtp on compter,
or can't goto recovery_mode
Thank you in advance

i think you are kinda messed it up..
you should not flash any thing except stock firmware using emui recovery..
only solution: try and flash twrp again and again to check if it installed correctly.. or send a pic of what it says in the command window when you try to flash twrp..
or you can even try to put an update.app under a dload folder of your sd card and try to flash(do it if you have emui recovery..remember try any other firmware.. not the one you alredy tried)

you should always read forums and look into various things you are not sure about before you even download superSU.zip.... you should try install twrp do full wipe and install rom THEN reboot and you should be fine. make sure that rom is made for your device...

Related

[Q] Xperia P flashtool problem

Hi, I'm not experienced with custom roms, so I bricked my phone trying to install cyanogenmod, please help me
I tried to install custom rom on my xperia p so I unlocked bootloader, rooted and got recovery. Everything seemed to be fine until i tried to flash cyanogenmod, I can't provide link because I'm new user. Using Flashtool I accidentally (not knowing exactly what I'm doing) chose "select system to Flash" and klicked on boot.img from this pack. After several minutes without respond it showed only "Please check the log before rebooting into system" so I disconnected phone. When I try to start, it only shows sony logo for a short while and then it resets, and shows it again and resets... I can only reset it by holding vol+ and power button until it vibrates 3 times, then I can put it in fastboot mode.
Please tell me, what should I do now. And sorry for my bad english.
Flash stock, flash the boot.img in fastboot mode, reboot and flash the zip.
If you did not copy the zip yet boot after flash and copy.
Thank You very much. Everything works fine now, excepting data access via mobile network. I'll try to find the answer in another thread. Thanks again!

[Q] Oppo Neo 5 Softbricked

Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls

Please help i cant restore

Hello,i got a huawei y6 2017 MYA-L11 model, i unlocked the bootloader and installed twrp, i made a backup of my stock rom and then wiped to install some custom roms.But now my phone is not working, everytime i start the phone it goes only to twrp even when i restore.I see that the backup exist in internal storage (contains system,data and boot) and says the restore was successful but the device boots always in twrp menu.Please help.
Any help guys?It doesnt seem so difficult problem for the level of this forum.
Try resetting the phone by pressing up volume button when on warning screen to get to erecovery. Use the option to shut down phone. Then try starting the phone again after a minute or two.
BTW what rom were you trying to install?
I tried every possible combination in the warning screen the only place i can go is twrp.I tried to install aokp,lineage 14.1, slim7, xeonHD nothing worked.
Where did you get those roms, I don't think they are for the y6 2017!
Anyway try pressing and holding the volume up button when at warning screen until the phone turns off. It will come back on and go to erecovery after the warning screen.
If that doesn't help then get SPFlashtool and stock rom and flash it.
I didnt know that y6 and y6 2017 was different.When i hold volume up the warning screen keeps repeating like forever and the phone doesnt go off.
Do i need spflashtool,can i do it from twrp install?
Anyway thanks for the help,it seems this phone cant take any custom roms,i should had bought a sumsung,can you suggest me some brands/devices that can be easily rooted/twrped with much custom roms in low range price.
We all make mistakes.
You will be able to fix it with the spflashtool if you download the rom.
Just have a look on here for an alternate device, I wouldn't know off hand which would be a good buy.
Tip: Read, read and then read some more before attempting anything with your phone!
Problem, the phone cant stay off when the usb is connected to the pc or electricity,when i press power off it reboots to warning screen and twrp,if it is closed when i plug the usb it starts into twrp all the time.
When i put the scatter file and press download this error appears
ERROR:S_COM_PORT_OPEN_FAIL(1013)
[COM]Failed to open COM port.
I m on linux
Use this tut to set up for linux.
You will just have to time plugging in the usb cable., I managed it so I know it can be done!

"soft-bricked" Essential Phone

Originally posted by: Azpre
Hello
A while ago, I tried to root my Essential Phone using magisk. I unlocked the bootloader, flashed twrp, but when I tried to install the magisk zip file, it failed, and I was stuck in a bootloop.
Easy problem to solve right? I wiped everything from my phone (including the ROM), downloaded a stock ROM (.ZIP file, and I think that’s what ****ed everything up) and when I tried to install it, it failed once again. Therefore, I downloaded another stock ROM file (this time as a .img file) and tried to installed it.
But what I ended up doing, was installing some other .img file as the boot image (on twrp), and after that, my phone kept restarting endlessly. I couldn’t access the recovery mode (if I tried to press the vol down + start buttons, or just the start button, the process would repeat, so I leaved my phone there until it run out of battery, now its off).
I was despaired and tried to search every inch of the internet for a solution, and obviously, I could not find it.
Any help would be greatly appreciated
Thanks for your attention.
(Im not sure if this is really a soft brick, I named this thread wit my basic knowlage, sorry if Im wrong)
Hi , what is full Model of phone ? and did you tried with fastboot flashing ?
https://www.youtube.com/watch?v=RrMLqSXcxjI
Teddy Lo said:
Hi , what is full Model of phone ? and did you tried with fastboot flashing ?
Click to expand...
Click to collapse
going to give it a shot after I buy another type - C cable, because mine just broke ;-;
but I think that's not going to work, because I can't access the recovery mode menu
when I press the power + vol down keys the Essential's logo appears and get stuck in a bootloop
Thanks anyways

Switched ROMS (Evolution X -> Nusantara) -> NOW Bootloop

Hi Community,
I read some posts how to fix my Problem, but i cant go to a service Point.
So I was using the Evolution X for a long Time (Installed with TWRP 3.1.0).
And now i wanted to change to the Nusantara Project (Vanilla), I did a clean Flash, everything worked i could access the System.
Than i had problems installing Play Store, so i rebooted into Recovery via the System. But now im Stuck in the Loop.
Can i Somehow connect my Phone to the PC and Reset?
Can someone tell me if i Hard/soft bricked my phone ?
Just a little advice, would be really appreciated.
Thanks a lot
Go to TWRP, wipe system, cache, data and dalvik. Now flash nusantra and whichever GApps are recommended for it (if there are no recommendations then use OpenGApps, make sure the architecture is correct). Now wipe dalvik and restart. Sometimes, certain roms begin to bootloop if you boot into the rom first, then try to install gapps later.
If you still have issues, just reflash the stock rom.
I cant access the TWRP anymore, im just stuck on the Bootloader, no matter how i turn on The Phone (Volume Up + Power ON ), (Volume Down + Power), (All 3 Buttons)
Nothing works anymore i dont understand ....
Im searching the net but i cant go to fastboot or something else, its just keeps on rebooting ...
So it's bootlooping, but you cant access recovery?
When the screen turns off, press the key combo and it should go to recovery.
Your best bet is to take it to a service centre, but if that really isn't possible for you, then wait for its battery to drain completely, then when you plug in the charger, instead of turning the phone on, press the key combo to enter the recovery. From there, wipe and flash some other OS.
I've also heard that certain versions of TWRP don't support some roms, leading to a bootloop. In that case, you'll have to use orangefox recovery to flash the rom (orangefox is flashable via twrp)
Yes its Bootlooping.
When i turn it on, on the Left Corner "Recovery Mode" blinks for one second. Than the usual Text appears:
"Orange State
Your Device has been unlocked and cant be trusted
Your Device will boot in 5 Seconds".
So after a couple of seconds (around 10-20 sec)
It turns off and immediately on again. I Just can turn it OFF when i hold all 3 Buttons.
Than i try starting it with Volume up + Power / Volume down + Power, But i cant access Recovery or TWRP.
So i should wait til the battery gets low and try it again ?
Like i said, my custom Rom (Evolutionx) and TWRP just worked fine. I dont know man ...
Well since your bootloader is unlocked, try flashing the stock rom again. Look for a tutorial and follow it.
Hi I managed to unbrick my device with this guide, and im back on a stock rom
Unbrick
i ran following commands to get to my custom rom:
I run adb reboot bootloader,
add executed following commands.
(Pitch Black recovery 3.1)
- adb reboot bootloader
- fastboot flash recovery recovery.img
-fasboot reboot recovery
It just hang up and booted after a while into the normal system.
But im not able to get to the recovery menu ?
When I restart and hold Volume up + Power, i go in a loop and the phone keeps restarting over and over again.
what have i Fu**ed up ?
Do i need another recovery tool ?
sorry guys, i appreciate your help a lot tho !
EDIT: Is my bootloader unlocked ?
I can access via "adb reboot bootloader" the phone
and on the blackscreen on the phone it is written:
oppo verfiy pass
fastboot_unlock_verify ok
Update:
So i tried some Stuff and i got Red State. No Problem i Unbricked it once again and now im on Stock Android 10.
Now im Trying to enable the bootloader again.
I downloaded the In Depth Test_Realme_6.apk but i keep getting the Error that i should update the system.
So should i update the system ?
I cant find a CURRENT Tutorial to make this work, please help...
If you cant find a tutorial for your version, why not downgrade back to a previous one if possible.

Categories

Resources