[7.1.2][OFFICIAL][FINAL][ Resurrection Remix 5.8.5 Nougat [VoLTE/DolbyAtmos/Magisk] - LeEco Le Max 2 ROMs, Kernels, Recoveries, & Other

[7.1.2][OFFICIAL][FINAL][ Resurrection Remix 5.8.5 Nougat [VoLTE/DolbyAtmos/Magisk] - LeEco Le Max 2 ROMs, Kernels, Recoveries, & Other

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:[7.1.2][OFFICIAL][FINAL][ Resurrection Remix 5.8.5 Nougat [VoLTE/DolbyAtmos/Magisk]
ROM is pretty stable, camera work, good performace, good battery. Ready for everyday use (IMHO).
Work in MultiROM as Internal/Secondary ROM
Download: link
GAPPS (does not included) : http://opengapps.org/ arm64 -> 7.1 -> Minumum required - Pico
Install/Update Note: Please, wipe system, cache, dalvik before install/update rom. Also flash Gapps after ROM WITHOUT reboot.
Sound settings/Viperfx DolbyAtmos now included in the ROM. ViperFX zip for TWRP: link
Here are my settings of viperfx & dolby atmos:
Device Trees:
https://github.com/x2-devel
Special thanks to:
RR Project for awesome ROM
@Tortel1210 for his big work on le max 2 kernel & device tree
@infrag for porting BlackScreen Kernel to Max2, VoLTE blobs and other work on device tree
@sdv22 for his working on framework, doze profiles and powersaving
darkobas for his hard work on OMNI for LePro3, his kernel & help
@ffboy2009 for his big work on le max 2 kernel & device tree
@codeworkx for his working on device tree
@Jrior1 for his working on leeco kernels
@cr3pt for his working on LOS
@arco for his shim for mm-qcamera-daemon for samsung!
@mosimchah for BlackScreen Kernel
And You all guys for testing and using this ROM
Last build: 06132017
ChangeLog
Changelog 02142017:
First build
Changelog 02192017:
Some fixes now more stable
Changelog 02202017:
Fixed autorotation and accelerometer
Changelog 03272017:
New build based on LOS14.1 sources
Changelog 04182017:
* Update to RR-5.8.3 (7.1.2)
* Fix multirom support as Secondary ROM
Changelog 04202017:
* Camera UP!
Changelog 04262017
* Update kernel, fixed performance issue, switch some features. Antutu 152k.
* Fixed incorrect battarey led working (from los gerrit, by Tortel)
* Fix audio_policy for divinebeats
* LePref: Remove unworked HAL switch
Changelog 04262017
* Mic volume fix
Changelog 05062017
- Last ViperFX & Dolby Atmos minimal package (with no garbage) included and work with all sounds, e.g. ringtones
- ViperFX & DA does not cause crash of Gallery and some other app now, also it must work correct with BT
- Pico gapps included
- Build use old (i will name it "STABLE") lineageOS kernel for now. But who want new, can flash it manualy.
- Also included LeTVRemoteControl, LeTVCamera (letvcamera dont work now)
- WIth stable kernel work: IR, Ambient Display
Changelog 05082017
- Dolby Atmos for LeMax 2 (fixed)
- Gapps removed from build
Changelog 05232017
- Add VoLTE support (thnks @infrag for volte blobs)
- Update audio configs, fix some audio issues
- Update powersaving system, doze profiles
- BlackScreen 2.1 Kernel (thnks @mosimchah for kernel & @infrag for porting to max2)
Changelog 06132017
- Updated Adreno & Vulkan blobs (thnks @infrag)
- Kernel: BS2.3 (thnks @mosimchah & @infrag)
- Ramdisk now compatible with LOS, you may install other kernels without changes.
- Last RR sources
- Many other small fixes (can be found on github)
Changelog 09182017
- ROM: Security Patch 05 Sep
- Device: fix low volume in cam recording
- Device: enable sdcardfs
- Kernel: BS3.5-RRPS
- Kernel: Autofocus fix
- Kernel: Optimized battery life
- Kernel: fix blueborne
- Kernel: fix sdcardfs driver for correct work with Multirom
Changelog 10042017
- Using new vendor tree fully remaked from beginning (from 23S and OB20)
- Switched to new radio stack
- Fix sdcardfs for multirom (it will work without patches in secondary rom with sdcardfs)
- Fix autobrightnes values
- Fix low level sound record
- Dex preopted
- ViperFX, SnapdragonCamera, AKT Profiles was removed from build
- Security patch 05 Oct
- Autofocus fix (thanks infrag)
- Some power tweek
- Kernel BS-3.5.i-RR-PS
Changelog 10062017
- Blobs downgraded from 23S to 19S, its more stable, camera has no "white dots".
- Slowmotion fix
- Removed unneeded shim for ims, it cause camera "clicks"
- VoLTE must work now
- Autobrightnes tweek
- Improved battery
If you looking for ResurrectionRemix-M-v5.7.4 OFFICIAL FINAL, look here:
ROM:[x82X][6.0.1] ResurrectionRemix-M-v5.7.4 OFFICIAL FINAL
Download: http://www.resurrectionremix.com/ -> Download -> x2
Mirror (Google Drive): link
Maintainer: @andr68rus
Device Tree: @Tortel, @cr3pt, @andr68rus https://github.com/tortel
Dont work
- VoLTE
Work
- All other.
Installation:
1. Backup your current ROM
2. Download the rom ResurrectionRemix-M-v5.7.4.xxxxxx.zip file
3. Move to phone
4. Reboot the phone in recovery [TWRP]
5. Wipe: "System, Cache, Dalvik, Data"
6. Install -> ResurrectionRemix-M-v5.7.4.xxxxxx.zip
7. Reboot
GAPPS (does not included) : http://opengapps.org/[/show upurl] arm64 -> 6.0 -> Minumum required ( Pico ) Sound settings/Viperfx:[GAPPS (does not included) : http://opengapps.org/ arm64 -> 6.0 ...ogle.com/open?id=0B-2l1xmYBAzsaDR3NldfbGljd0E (c) royalseeker, original topic here
2. I recomend turn on speaker optimisation in viperfx and configure your dolby atmos. This will give you very good sound.
ChangeLog:
26 Jan 2017:
* accelerometer fixed (thnx to @Tortel)
* Snap Camera can now 21 mp
* LED Notification fixed
* Remote Control included.
30 Jan 2017:
* Camera2Api work, set by default
- RIL still have problem with "Only 2G mode"
02 Feb 2017:
* 4K Video in Snap
* Voice quality (Need test, also if you will install divinebeats, install patched version!), also some other sound fix, please report about problems.
* Some changes in Ambient display, now it fully work (You need to enable it in Settings - Ambient Diplay (not in DIsplay!)
* Removed D2TW from settings
* Force enabled camera1api: whatapp and other app work nice.
+ Added LeecoCamera App from S22 test only (to run it you need enter settings -> app -> permission and enable permission, it will not ask for it by default). Panoramic dont work.
10 Feb 2017
* Fix some errors from previos build (LED, hardware keys).
* Try to fix 2G.
11 Feb 2017
* Wifi 802.11n channel bonding fix.
* Return back individual sim on/off switch.
14 Feb 2017
* Fix some errors, FW now stable.
17 Feb 2017
* Patch Level 12012016
19 Feb 2017
+ Now we are OFFICIAL
* Competly moved to LOS device tree sources
+ Added OTA (Configuration -> Update)
- Removed LeTVRemoteControl, LeTVCamera (can be installed from ZIP)
+ Fixed wifi 2.4GHz+BT issue
+ Snap from LOS repo with autoresoluton fix
* Speakerphone fix
* Device name fix for PlayMarket
20 Feb 2017
- Fix wifi tethering
- Some changes for viperfx work (change fluencetype to none, add sample rate in audiopolicy)
- Shorten default BT name "LeEco Le Max 2" -> "Le Max 2"
- Changes in advanced settings translation (ru(full), es(part), cn(part))
26 Feb 2017
- Security patch level updated to 01/01/2017
- Added hardware buttons disable/enable switch
- Added Hardware buttons light brightness + mode settings
- Added leeco quick charge settings (Settings-> Configuration -> Battery).
- Changed live display default day color temperature from 8000 to 6500
- Full Simple Chines translation (thanks @atzsmm)
- LeTVRemoteControl, LeTVCamera returned back to ROM.
01 March 2017
* Fixed QuickCharge
* RR update: Upstream merged to LineageOS
* AOSP update: Tag bumped to refs/tags/android-6.0.1_r78
07 March 2017
* Battery optimisation tweeks
* Small fixes
25 March 2017
* Last dev tree updates
* Mokee kernel
16 April 2017 - FINAL BUILD.
* Mokee Kernel with QC 3.0

Are the gapps included or we should flash it?
Enviado desde mi A0001 mediante Tapatalk

arceoxis said:
Are the gapps included or we should flash it?
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
I think that I didn't flash gapps yesterday but I was very tired maybe I don't remember well

File Download Limit exceeded

Screenshots?

RISHI RAJ said:
File Download Limit exceeded
Click to expand...
Click to collapse
Try this:
To fix this error you simple have to create an account in Yadi.sk. After creating account reopen that link and add that file to your account. After adding to your account go to your files and click that file (which you just added to your account) now click download and download will start without any problem!
Enviado desde mi A0001 mediante Tapatalk

arceoxis said:
Are the gapps included or we should flash it?
Click to expand...
Click to collapse
No, gapps does not included. This is stock ressurection remix rom.
RISHI RAJ said:
File Download Limit exceeded
Click to expand...
Click to collapse
I create mirror on gdisk: https://drive.google.com/open?id=0B-2l1xmYBAzscEZHVWQ1YXkzcE0
Emokah said:
Screenshots?
Click to expand...
Click to collapse
Screenshots +

Thanks for the great rom,As you are an expert Can you do something about Volte,The only thing I miss in this rom

Good job spaciba!!

Yes volte please
Sent from my Le X821 using XDA-Developers Legacy app

I think there is a problem with sound of call is not clear?!
And with hp on it's worth

Please VoLTE enable it in the ROM.

Yes please enable VOLTE. There's already patch available for nougat based ROMs which will enable VOLTE.

Good gob! I'll follow this rom closely.
what happend with accelerometer? with unnofficial cm13 (or lineageos) it works.

I found a bug : fingerprint, completely dead, uninstalled and installed your CM13 and found the same bug .
Now I'm back on 446dev and fingerprints work fast as ever for me.

Oh, how great! A new developer and a new ROM!
Thanks for sharing!

Great job, thank you very much.
All working for me
The fingerprint reader very fast
The camera only allows me an image of max 16 mpx and not the 21 mpx

venezolano69 said:
I found a bug : fingerprint, completely dead
Click to expand...
Click to collapse
Strangely, i test it and it work.
About VoLTE: Guys, first of all we try to fix major bugs (accelerometr, etc) and then try to find the way to enable volte.
BTW, In ru volte working only in Moscow and in test mode only with some operators phone.

j.llorente said:
Good gob! I'll follow this rom closely.
what happend with accelerometer? with unnofficial cm13 (or lineageos) it works.
Click to expand...
Click to collapse
Hm, can you please tell build date where accelerometr work in lineageos? Now it does not work to, we try to fix it.

sdevaux said:
I think there is a problem with sound of call is not clear?!
And with hp on it's worth
Click to expand...
Click to collapse
I also noticed it. Same problem was it november Mokee releases. Add this to ToDo

Related

[SM-P601] [6.X] Lineage/Mokee/CM/RR for Galaxy Note 10.1 3g (2014)

Donated:
---
XDA:DevDB Information
SM-P601 Android 6.X, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
ShevT
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-12-17
Last Updated 2017-06-13

Changelog:
Code:
[B]201711201:[/B]
[LOS-13] [INDENT]ASB November 2017
Fix [URL="https://jira.lineageos.org/browse/BUGBASH-1052"]BUGBASH-1052[/URL]
Minor fixes[/INDENT]
[B]201710915:[/B]
[LOS-13] [INDENT]Fix WiFi KRACK[/INDENT]
[B]201710915:[/B]
[LOS-13] [INDENT]Android 6.0.1 r81
ASB October 2017[/INDENT]
[B]20170923:[/B]
[LOS-13] [INDENT]Android 6.0.1 r80
ASB September 2017[/INDENT]
[B]20170910:[/B]
[LOS-13] [INDENT]Update Sources[/INDENT]
[B]20170608:[/B]
[LOS-13] [INDENT]Update Sources[/INDENT]
[B]20170603:[/B]
[MK60.1] [INDENT]SQLite 3.19.2
Bye bye MoKee. Source codes are not updated for a long time.
This is the latest version. There will be no more assemblies.[/INDENT]
[B]20170602:[/B]
[LOS-13] [INDENT]Update Sources
SQLite 3.19.2[/INDENT]
[B]20170413:[/B]
[LOS-13] [MK60.1] [INDENT]Update Sources[/INDENT]
[B]20170326:[/B]
[TWRP-3.1.0-1]
[INDENT]Fix reboot when no OS is present
Set Backup_FileName on adb backup[/INDENT]
[B]20170313:[/B]
[LOS-13] [MK60.1] [INDENT]Fix writting on NTFS partiions
Add sec_e-pen keylayout. It fix work the virtual keys, if you press them a e-pen.
Fix speaker priority on phone call
Modified open source camera wrapper
minor fixes[/INDENT]
[B]20170206:[/B]
[LOS-13] [INDENT]Update sources
Fixed AudioFX! It is back into the ROM and it works great!
Rid of our SEANDROID message on boot (Thanks @thompatry)
Added cache image partition size
minor fixes[/INDENT]
[B]20170205:[/B]
[TWRP-3.0.3-1][INDENT]Updated sources
Rid of our SEANDROID message on boot (Thanks @thompatry)
Added cache image partition size[/INDENT]
[B]20170203:[/B]
[LOS-13] [MK60.1] [INDENT]Update sources
audio_effects.conf moved to vendor (Fixes some sound problems)
main-mic: volume Up
minor fixes[/INDENT]
[B]20170125:[/B]
[LOS-13] [INDENT]Update sources[/INDENT]
[B]20170109:[/B]
[LOS-13] [INDENT]Update sources
Added Network Traffic Indicator[/INDENT]
[B]20170108:[/B]
* Team Win Recovery 3.0.3-0
[MK60.1] [INDENT]Added LatinIME keyboard
Default locale en-US
Fixed long time installation[/INDENT]
[B]20170107:[/B]
Added MoKee OpenSource 60.1
[LOS-13, MK60.1] [INDENT]SQLite 3.16.2
Minor fixes[/INDENT]
[B]20170103:[/B]
[LOS-13] [INDENT]SQLite 3.16.0
Minor fixes[/INDENT]
[B]20161230:[/B] - Goodbye Cyanogenmod! Hello, LineageOS
[CM13, RR-M][INDENT]Update sources
This final assembly RR and CyanogenMod.[/INDENT]
[B]20161225:[/B]
[CM13, RR-M][INDENT]Update sources
Kernel: Minor fixes[/INDENT]
[B]20161215:[/B][INDENT][CM13]Android 6.0.1_r74
[CM13, RR-M] Disable simple root access
Kernel: Minor fixes[/INDENT]
[B]20161212:[/B]
[CM13, RR-M][INDENT]Disable Input Boosters by default
Kernel: Fix scaling available freqs (needed for Deathly Adiutor)
Kernel: WiFi: Security vulnerability - protect array overflow in PNO
Kernel: WiFi: Minor fixes[/INDENT]
[B]20161209:[/B]
[CM13, RR-M][INDENT]Audio HAL: Fixed problem with volume control during a voice call
Now use SQLite 3.15.2 with [URL="http://forum.xda-developers.com/showpost.php?p=64354348&postcount=5"]additional optimization[/URL]
Some kernel fixes[/INDENT]
[RR-M] [INDENT]Removed Kernel Adiutor[/INDENT]
[B]20161206:[/B]
[CM13, RR-M][INDENT]Audio HAL fixes. I checked with 5.1.1 bootloader. There is no problem. I ask to check crackles...
Fixed "[URL="http://forum.xda-developers.com/showpost.php?p=69931958&postcount=378"]says charging slowly[/URL]"
Updated SDCard FS[/INDENT]
[B]20161204:[/B]
[CM13, RR-M][INDENT]New kernel control app included: [URL="https://play.google.com/store/search?q=deathly%20adiutor"]Deathly Adiutor (check it out on google play!)[/URL]
Added support for 3000ma chargers.
Added support for UBS3.0 charging speeds (Up to 1000ma).
Added screen on charging limiter to avoid high heat generation while charging.
Added Display Mode Control (mdnie)
KERNEL: epen_saving_mode node now shows the current state of the feature.
KERNEL: touchkey glove_mode node now shows the current state of the feature.
KERNEL: added new sysfs to enable/disable input boosters (touchscreen, touchkey and spen)
KERNEL: updated f2fs driver
KERNEL: updated WiFi driver
KERNEL: use gcc UB-5.3 kernel toolchain
More minor fixes[/INDENT]
[B]20161130:[/B]
[TWRP 3.0.2-4][INDENT]Kernel: New f2fs driver and other...
Kernel:SELIinux Enforce
Update RU translation (by [email protected])
Added n1awifi and n1a3g assert's
Added tzdata
Minor fixes ...[/INDENT]
[B]20161122:[/B]
[CM13, RR-M][INDENT]Fix InfraRed
Minor fixes ...[/INDENT]
[B]20161120:[/B]
[CM13, RR-M][INDENT]Kernel: Switch Stackprotector to REGULAR.
[INDENT]This fixes the problem of a kernel panic when the camera starts. [/INDENT] [/INDENT]
[B]20161119:[/B]
[CM13, RR-M][INDENT]Fixed Screen cast/Wireless display
DRM: fall back to L3 security level
Xposed minor fixes ...[/INDENT]
[B]20161118:[/B]
[CM13, RR-M][INDENT][Kernel]: Enable STACKPROTECTOR STRONG
[Kernel]: [Exynos Thermal]: See and set trip point temperature with oneshot node... (Thanks tincho5588)
[Kernel]: Minor fixes
[CM13] Added Xposed patch. (Check it..)
Added H263 codec
[Exynos Thermal]: [URL="https://github.com/ShevT/device_samsung_lt033g/commit/145b9f4df86d3e55934e6182eca3d7099098ac6c"]Set default values for thermal throttling[/URL]
Other minor fixes ...[/INDENT]
[B]20161115:[/B]
[RR-M][INDENT]Added menu option to turn off HWKeys[/INDENT]
[B]20161114:[/B]
[CM13, RR-M][INDENT]Fix default tiles on QuickSettings panel
Removed Packages: ResurrectionStats, ResurrectionOTA, CMUpdater,
Removed Packages: CMBugReport, UnifiedEmail, Email, Exchange
Improved interface performance
[URL="http://forum.xda-developers.com/showpost.php?p=64354891&postcount=7"]Added instruction[/URL] for downgrade bootloader to 4.4.2[/INDENT]
[B]20161113:[/B]
[CM13, RR-M] [INDENT]Android 6.0.1 r74
Fix of lights buttons if hardware keys is disabled
Allow to use baseline profile for AVC recording
Remove ANT+ support. It does not work at all.
AudioHAl minor fixes
Kernel: GPU: OC/UC clocks and custom interface fixes
Kernel: ALSA fixes
QuickSettings panel: in column 4 tiles
QuickSettings panel: changed the default tiles
Other minor fixes ...[/INDENT]
[B]20161107:[/B]
[CM13, RR-M] [INDENT]Camera: New camera blobs. It works fast and well
Audio: Added more sec soundfx blobs
Audio: Adjusting the Wolfson DAC EQ bands
GPU: Added GPU clock interface
GPU: Added GPU voltage control
GPU: Added GPU thermal control interface
GPU: Added unified sysfs module
Kernel: Update kernel Motor driver (compatible with CMHW)
Kernel: Added frandom
System: Disable Recovery Updater
System: Cleaning and updating init scripts
System: Update VibratorHW class
System: Added audio/ac3 support
System: Disable LiveDisplay by default (When night mode - low UI performance)
System: Removed AudioFX package (Incompatible with Wolfson)
System: Removed HEVC Decoder. We do not support it.
System: Added support Exynos.AVC.Decoder.secure
More minor fixes ...[/INDENT]
[B]20161028:[/B]
[CM13, RR-M] [INDENT]Kernel 3.4.113
Kernel: Fixed [URL="https://github.com/dirtycow/dirtycow.github.io/wiki/VulnerabilityDetails"]dirtycow[/URL] bug
The kernel is compiled linaro gcc-5.2
Settings: Advanced Reboot moved to Button Settings
Settings: Advanced power menu enabled by default
Fixed Incoming Call Presentation
Added exynos MPEG2 Decoder
Updated media_codecs and media_profiles
Improved interface performance
Added support for Notification lights on the buttons. Blink, blink...
Added support of Advanced Low Power audio
More minor fixes in the camera, wifi and other....[/INDENT]
[B]20161020:[/B]
[CM13, RR-M] [INDENT]Initial ResurrectionRemix M
Fixed constant activity WiFi
Fixed Bluetooth calls (If you touch the screen during a call, the sound disappears)
Updated some kernel drivers
Fixed vold mount points
audio: Increase volume
Power optimization
More minor fixes[/INDENT]
[B]20161018:[/B]
[CM13][INDENT]New camera blobs (from T805XXU1CPH5). Runs faster and works also faster.
Fixed Camera low quality video shooting
Fixed Screen Record low quality
Fixed DRM
Fixed bluetooth headset phone calls.
More minor fixes[/INDENT]
[B]20161016:[/B]
[CM13][INDENT]Enable multi-window as default
More minor fixes
Added mirror to yandex disk[/INDENT]
[B]20161014:[/B]
[CM13][INDENT]Fix Camera/Torch
Fix Screen Record
New GPU MALI T6XX R7P0 driver
More minor fixes[/INDENT]
[B]20160921:[/B]
[CM13][INDENT]Update media codecs profiles
Increase Speaker Digital Volume
Disable DEXPREOPT
Fix WiFi direct and other WiFi problems..
More minor fixes[/INDENT]
[B]20160903:[/B]
[Temasek, CM13][INDENT]Update AudioHAL. Fixed Phone calls (No sound)
Enable noise suppression
Bluetooth fixes
Minor fixes[/INDENT]
[B]20160826:[/B]
[Temasek, CM13][INDENT]Fixed Key Disabler
Fixed Setup Wizard crash on firs boot
[GSM] Fixed search network and an automatic setting apn (it is not necessary to prescribe the hands)
Fixed vibration settings
Update GPS blob from P601XXUDOJ5
[URL="https://github.com/ShevT/device_samsung_lt033g/commit/e35c6297b5167d30631358340587d045c6dd6761"]Repurpose menu key[/URL] as an app switcher key (long press menu key - calls the application menu)
[Temasek] Add Enable/Disable HW Keys Preference ([B]Settings -> Buttons -> Hardware Keys[/B])[/INDENT]
[B]20160821:[/B]
[Temasek] Just updated
[CM13] [INDENT]Fixed PowerHAL for new kernel
Fixed IR port
Minor fixes in init scripts[/INDENT]
[B]20160819:[/B]
[TWRP 3.0.2-1][INDENT]Added to backup: preload, efs, modem partitions
Including [URL="https://github.com/omnirom/android_bootable_recovery/commit/ce8f83c48d200106ff61ad530c863b15c16949d9"]adb backup[/URL][/INDENT]
[Temasek][INDENT]Fixed PowerHAL for new kernel
Fixed IR port
Minor fixes in init scripts[/INDENT]
[CM13] I'll update later
[B]20160817:[/B]
[CM13] Update :)
[Temasek] Add new ROM
<cut>

Reserved

CyanogenMod 13
CyanogenMod
About | Home Page | WiKi | Git page
CyanogenMod 13.0 (Android 6.0.1) Final
Screenshots:
Downloads:
Android File Host / Yandex Disk. Build date 20161230
Click to expand...
Click to collapse

ResurrectionRemix M
ResurrectionRemix M
Home Page | Git page
ResurrectionRemix M (Android 6.0.1) Final
Screenshots:
Downloads:
Android File Host / Yandex Disk . Version 5.7.4. Build date 20161230
Click to expand...
Click to collapse

MoKee OpenSource
MoKee Open Source
About | Home Page | Git page
MoKee 60.1 (Android 6.0.1) Final
Screenshots:
Downloads:
Android File Host. Build date 20170603
Click to expand...
Click to collapse

Lineage OS
Lineage OS
About | Home Page | Git page
Lineage OS 13.0 Stable
Screenshots:
Downloads:
AFH Downloads. Build date 20171201
Click to expand...
Click to collapse

Downgrade bootloader to 4.4.2
This will fix the problem with the sound (crackling) on my firmwares in the transition from the official 5.1.1 firmware.
Attention! I do not take any responsibility for possible negative consequences.
1) Make a backup copy of all data (including sections EFS, Modem, Preload)
2) Copy backup on PC
3) Download Odin 3.10 and Bootloader (You must rename the file, so extension was .tar or .tar.md5. For example - BL_P601XXUCOF1_CL5054848_QB5172195_REV00_user_low_ship.tar)
4) Run "download" tablet mode.
5) Connect tablet to PC
6) Run Odin
7) In the BL (bootloader) field, insert file BL_P601XXUCOF1_CL5054848_QB5172195_REV00_user_low_ship.tar
8) Start.... The bootloader will be installed and the tablet reboots.
9) You can go to TWRP and restore the backup (It is enough to restore the data and /data partition).
10) Installing firmware and OpenGapps-nano.
P.S. If you have not switched on my firmware (use stock 5.1.1 firmware), it is recommended to remove all of the data (not to restore /data partition)

Great news ShevT... Thanks a million!

ShevT said:
Reserved 5
Click to expand...
Click to collapse
From where can we downoad it.?

Good job!
I hesitate to mention the "no placeholder" rule, especially to a dev who do original work, but...
Anyway hope to see a release soon, keep up the good work!

Nice!
Will it work on P600 like other P601 roms?
Hope we see a download link in the next few days!
That would be an awesome xmas gift!
Impatient to test it!
Keep up the good work, ShevT!:good:
Merry xmas!!!:angel:

is there stil no download link?
Sent from my SM-P600 using XDA Free mobile app

ruud said:
is there stil no download link?
Click to expand...
Click to collapse
Not yet.
I now have a problem with time. It will be some time - will build

Thanks for the good work ShevT, looking forward to Marshmallow. Hopefully, we'll have a build before the end of the year?

see firmware

ShevT said:
see firmware
Click to expand...
Click to collapse
Can this be flashed on the SM-P600?

Yes

mosimchah said:
Can this be flashed on the SM-P600?
Click to expand...
Click to collapse
can you give a link to it. i only see the 5.1.1 rom
Sent from my SM-P601 using XDA Free mobile app

ruud said:
can you give a link to it. i only see the 5.1.1 rom
Sent from my SM-P601 using XDA Free mobile app
Click to expand...
Click to collapse
It's in the OP. Link: https://www.androidfilehost.com/?fid=24345424848487946

[ROM][UNOFFICIAL][5.1.1]CyanogenMod 12.1 for Samsung Galaxy J5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 12.1 for Samsung Galaxy J5
DISCLAIMER
Code:
Your warranty is now void.
I'm not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired, because the alarm app failed. Please
do some research if you have any concerns about features included
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
--------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
--------------------------------------------------------------------------
Real Battery Life Calculations
Talk Time: Aprox. 18 hours (3G)
Music Playback: Aprox. 62 hours
Video Playback: Aprox. 13 hours
Screen On Time (Idle CPU): Aprox. 20 hours
Screen On Time (Full load CPU): Aprox. 6-8 hours (user-dependent)
Deep Sleep only: Aprox. 70 hours
--------------------------------------------------------------------------
Installation
1. Make sure you have updated to stock 5.1.1.
2. Download the ROM from the link below.
3. Download 5.1.1 ARM GAPPS.
4. Transfer the zip files to your SD card.
5. Reboot to recovery mode. ( Vol UP + Home + Power )
Note: It is highly recommended to use TWRP Recovery.
6. Optional: Do nandroid backup.
7. Full wipe /system, /internalsd, /data, and /cache.
8. Install CM zip and GApps zip.
9. Reboot to system.
10. Setup your device.
Enjoy!
------------------------------------------------------------------
Downloads
SM-J500FN
SM-J500F
SM-J500G
SM-J500M
SM-J500H
SM-J500Y
SM-J5007
------------------------------------------------------------------
SourceCheck out the ROM Source available on GitHub.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Kernel Source
---------------------------------------------------------------------------------------------------------------------------------------
Credits
@jackeagle for kernel maintaining.
@TheWisp for the awesome InputDisabler.
@aapav01
@ganesh varma for helping when development needed support.
And last the awesome J500H testing team we have in Hangouts, for being there all this time.
XDA:DevDB Information
CyanogenMod 12.1 for Samsung Galaxy J5, ROM for all devices (see above for details)
Contributors
Nick Verse, ganesh varma
Source Code: https://github.com/Galaxy-J5
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop Modem/Baseband
Version Information
Status: Stable
Current Stable Version: 4.0.0
Stable Release Date: 2016-07-23
Created 2016-06-23
Last Updated 2016-09-23

Bugs and Issues
Code:
- No audio through FM Radio.
Let me know if you find other bugs!
--------------------------------------------------------------------------------------------------------------------------------------------
Submitting Bug Reports:
If you find some bugs, report it with logs and detailed information of the issue.
Do not report bugs if custom tweak is done.
Do not report bugs if Xposed is installed!
---------------------------------------------------------------------------------------------------------------------------------------------
Changelog:
Code:
[B]September 23, 2016[/B]
- Fixed reboot issues.
- Fixed lags from not needed libraries and kernel commits.
- Added IMS and VoIP support. (Needs testing)
- Fix rmnet (data) issues.
- Dalvik/ART optimizations. Now ROM is more smooth.
- Removed extra governors/io schedulers.
(The provided governors in OC kernels for J5 are for Exynos devices,
so they need extra configuration to be adapted to Snapdragon devices.
Until then, we will use the stock and trusted ones,
but keep overclocking to be enabled by a userspace application).
- Many kernel fixes.
- Framework fixes.
- Audio enhancements.
- Added audio echo cancellation support (AEC) for in-calling audio.
- Added Wifi-Direct and Screen Cast/HDMI support in kernel. (Needs testing)
- Added Volume wake and Home button wake support.
(You can enable/disable these features from Settings->Buttons)
- Merged with latest CM Changes.
[B]September 8, 2016[/B]
- Removed On-Screen-Buttons implementation.
(Currently we don't have an implementation for hard disabling touch-keys in kernel.)
- Kernel fixes.
- Attempt to fix reboot issues and data problems for [B]G[/B] and [B]H[/B] variant.
- Removed KernelAdiutor
[B]September 2, 2016[/B]
- Added OC in kernel and fixes for frequency ladder. (0.2 to 1.8 GHz)
- Added a lot of governors and I/O schedulers.
- Added KernelAdiutor as a built-in application for tweaking parameters.
- Added DayDream support by default.
(It is a screensaver feature for Android.
You can choose your preference in Settings -> Display & lights -> DayDream)
- PowerHAL fixes.
- Disabled compression of camera images, set quality of Encoder to 100% and increase memCap *4.
(Image sizes are larger, and have better quality)
- Added On-Screen-Buttons implementation similar to qemu.hw.mainkeys=1.
(You can use software keys for Back/Menu/Options, by enabling it on the first setup screen.
Main keys will be permanently disabled)
- Merged with latest CM Changes.
[B]August 20, 2016[/B]
- Excluded InputDisabler from build. (Not needed from now on as we found the root of the cause)
- Screen on/off lag reduction. (WIP)
- Fixed SD Card issues and corresponding folder creations on boot.
- Added option to secure unmount external SD before removal.
- Added option to record in-call voice for all regions.
- CPU speed/responsiveness optimizations.
- SELinux denial fixes for other variants too.
- Switched to SELinux enforcing, minized kernel messages and ADB secure (needs su command from now on).
- Optimized latency for audio HAL. No drop-outs from now on.
- Audio effect optimizations. Sound is more crisp.
- Excluded zRAM.
(zRAM caused not needed CPU overhead and heat issues when on Full Brightness+Mobile Data+GPS)
- TWRP bug-fixes.
- Kernel fixes.
- Merged with latest CM Changes.
- Updated stable release name to 2.0.0
[B]July 22, 2016[/B]
- Fixed small freeze on screen unlock.
- Fixed Auto Display Color Calibration.
- Disabled Auto Brightness feature. (No light sensor for J5)
- Raised the perceived loudness by 4db on headphones, and 4db on speaker output.
- Fixed audio minor drop-outs when exiting deep sleep.
- Fixed some firmware link typos.
- Enabled zRAM. (512MB)
- Merged with latest CM Changes.
[B]July 15, 2016[/B]
- Fixed NFC.
- Fixed Keymaster firmware detection.
- Merged with latest CM Changes.
[B]July 14, 2016[/B]
- Fixed moving apps to external SD.
- Added option to choose the default install location of applications in Settings.
- Optimized haptic feedback.
- Fixed front flash camera latency.
- Merged with latest CM Changes.
[B]
June 23, 2016[/B]
- Optimized CPU usage.
- Fixed SELinux Denials.
- Fixed audio latency and quality.
- Fixed QR Scanner display errors and camera related problems.
- Kernel updates.
- Merged with latest CM Changes.
--------------------------------------------------------------------------------------------------------------------------------------------------
Tips :
To activate Developer settings : Settings -> About phone -> press Build number 7 times.
To activate 3-way reboot go to Developer settings and select "Advanced reboot".
Root is included and disabled by default, enable it from Developer settings - Root access.
BusyBox is included.
LiveDisplay is a feature for adapting display colors for night usage.
You can enable it by turning on GPS and data/wifi for some seconds.
Then go to Settings -> Display & lights -> LiveDisplay -> Display mode and change from off to automatic.
Then your phone will know when to adjust your display for night usage through your local GMT zone.
You can also adjust Color Temperature for Day/Night modes.

Reserved.

Reserved :fingers-crossed:

@Nick Verse Very good work and thanks to the update several bugs were fixed, but something happened, flash of the camera does not work well. Taking photo with flash front dark leaves that mistake but I could see in the build 9 of vaserbanix. I hope this report will help to upgrade future and thank you again for the good work. Sorry for my bad English translator use. Regards

Awesomeness
Great work! Keep it up.

Bro will test it tommorrow.
That calling bug is fixed or not?
Active touchpad during phome call.? @Nick Verse
Sent from my SM-J500F using XDA-Developers mobile app

In order to prevent touch during calls, press the power button and it should keep your phone locked until you finish your call. It works for me.
Sent from my SM-J500F using Tapatalk

@Nick Verse your md5 files still have full path, you can try the following command to generate md5 files recursively:
in zsh
Code:
for i in **/*(/D) ; do ( cd $i ; for j in *(.D) ; do md5sum $j > $j.md5 ; done ) ; done
in bash run this script
Code:
#!/bin/bash
if [ $# -ne 1 ] ; then
echo "Usage $0 [directory]"
exit 1
fi
find $1 -type f -print0 | while IFS= read -r -d $'\0' file; do
(
cd "$(dirname "$file")"
filename="$(basename "$file")"
md5sum "$filename" > "$filename".md5
)
done
Source

Which you recommend gapps?

1szymon4 said:
Which you recommend gapps?
Click to expand...
Click to collapse
open_gapps-arm-5.1-nano

1szymon4 said:
Which you recommend gapps?
Click to expand...
Click to collapse
I use gapps micro.

how do I flash this if I got an older version of this cm?

What about j500h ??
Is it safe to install test version ??

Ahmed SD said:
What about j500h ??
Is it safe to install test version ??
Click to expand...
Click to collapse
Still testing not booting so dont
Sent from my SM-J500H using Tapatalk

i use j5007. it had error 7. i removed asserts after that installed it but it cant boot and stuck at boot animation.
---------- Post added at 08:40 PM ---------- Previous post was at 08:11 PM ----------
i flashed the rom with an other kernel. it started but systemui force closed and i cant do any thing.

American_Jesus said:
@Nick Verse your md5 files still have full path, you can try the following command to generate md5 files recursively:
in zsh
Click to expand...
Click to collapse
Thank you for your report. The .md5 files are generated from the CyanogenMod source build itself.

Avi gupta said:
Bro will test it tommorrow.
That calling bug is fixed or not?
Active touchpad during phone call. @Nick Verse
Sent from my SM-J500F using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes. Touch during call is fixed.

soso90 said:
i use j5007. it had error 7. i removed asserts after that installed it but it cant boot and stuck at boot animation.
i flashed the rom with an other kernel. it started but systemui force closed and i cant do any thing.
Click to expand...
Click to collapse
You must have Lollipop baseband/modem, otherwise things won't work. Make sure you have updated to official 5.1.1 first if you are on Android 6.0.

Nick Verse said:
You must have Lollipop baseband/modem, otherwise things won't work. Make sure you have updated to official 5.1.1 first if you are on Android 6.0.
Click to expand...
Click to collapse
i used cm12.1 before

[ROM][UNOFFICIAL][5.1.1]CyanogenMod 12.1 for Samsung Galaxy J5 (2015)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 12.1 for Samsung Galaxy J5 built from source
DISCLAIMER
Code:
Your warranty is now void.
I'm not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired, because the alarm app failed. Please
do some research if you have any concerns about features included
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
--------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
--------------------------------------------------------------------------
Real Battery Life Calculations
Talk Time: Aprox. 18 hours (3G)
Music Playback: Aprox. 62 hours
Video Playback: Aprox. 13 hours
Screen On Time (Idle CPU): Aprox. 20 hours
Screen On Time (Full load CPU): Aprox. 6-8 hours (user-dependent)
Deep Sleep only: Aprox. 70 hours
--------------------------------------------------------------------------
Installation
1. Make sure you have updated to stock 5.1.1.
2. Download the ROM from the direct link for your device in the Downloads section below.
3. Download 5.1.1 ARM GAPPS.
4. Transfer the zip files to your SD card.
5. Reboot to recovery mode. ( Vol UP + Home + Power )
Note: It is highly recommended to use TWRP Recovery
6. Optional: Do nandroid backup.
7. Full wipe /system, /internalsd, /data, /cache, as well as the Android folder from your external SD.
Note: You will have to format data as well if you want to use data encryption
8. Install CM zip and GApps zip.
9. Reboot to system.
10. Setup your device.
Enjoy!
------------------------------------------------------------------
Downloads
SM-J500FN
SM-J500F
SM-J500G
SM-J500M
SM-J500H
SM-J500Y
SM-J5008
SM-J5007
------------------------------------------------------------------
SourceCheck out the ROM Source available on GitHub.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Kernel Source
---------------------------------------------------------------------------------------------------------------------------------------
Credits
@jackeagle for kernel maintaining.
@TheWisp for the awesome InputDisabler.
@aapav01
@ganesh varma for helping when development needed support.
And last the awesome J500H testing team we have in Hangouts, for being there all this time.
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy J5
Contributors
Nick Verse, ganesh varma, #Henkate
Source Code: https://github.com/Galaxy-J5
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop Modem/Baseband
Version Information
Status: Stable
Current Stable Version: 4.0.0
Stable Release Date: 2016-09-23
Created 2016-09-25
Last Updated 2017-04-29

Bugs and Issues
Code:
- No audio through FM Radio.
Let me know if you find other bugs!
--------------------------------------------------------------------------------------------------------------------------------------------
Submitting Bug Reports:
If you find some bugs, report it with logs and detailed information of the issue.
Do not report bugs if custom tweak is done.
Do not report bugs if Xposed is installed!
---------------------------------------------------------------------------------------------------------------------------------------------
Changelog:
Code:
[B]October 11, 2016[/B]
- Final build.
- Fixed all issues with GPS and Wi-Fi.
- Added new frequencies that Samsung had not included for CPU. (200MHz-1401MHz)
- Kernel stability updates.
- Audio low-latency porting to CM.
- Audio FX made the right way. (Audio is loud and crispy now)
- Abandoning FM project to work for CM13. (No audio)
- Merged with latest CM Changes.
[B]September 28, 2016[/B]
- Fixed lagging issues.
- Imported SIP/voIP connection features into ROM. (Needs testing)
- Enabled DSP audio processing by default.
- Disabled GPS logging that was ovehauling our logcats.
[B]September 23, 2016[/B]
- Fixed reboot issues.
- Fixed lags from not needed libraries and kernel commits.
- Fix rmnet (data) issues.
- Dalvik/ART optimizations.
- Removed extra governors/io schedulers.
(The provided governors in OC kernels for J5 are for Exynos devices,
so they need extra configuration to be adapted to Snapdragon devices.
Until then, we will use the stock and trusted ones,
but keep overclocking to be enabled by a userspace application).
- Many kernel fixes.
- Framework fixes.
- Audio enhancements.
- Added audio echo cancellation support (AEC) for in-calling audio.
- Added Wifi-Direct and Screen Cast/HDMI support in kernel. (Needs testing)
- Added Volume wake and Home button wake support.
(You can enable/disable these features from Settings->Buttons)
- Merged with latest CM Changes.
[B]September 8, 2016[/B]
- Removed On-Screen-Buttons implementation.
(Currently we don't have an implementation for hard disabling touch-keys in kernel.)
- Kernel fixes.
- Attempt to fix reboot issues and data problems for [B]G[/B] and [B]H[/B] variant.
- Removed KernelAdiutor
[B]September 2, 2016[/B]
- Added OC in kernel and fixes for frequency ladder. (0.2 to 1.8 GHz)
- Added a lot of governors and I/O schedulers.
- Added KernelAdiutor as a built-in application for tweaking parameters.
- Added DayDream support by default.
(It is a screensaver feature for Android.
You can choose your preference in Settings -> Display & lights -> DayDream)
- PowerHAL fixes.
- Disabled compression of camera images, set quality of Encoder to 100% and increase memCap *4.
(Image sizes are larger, and have better quality)
- Added On-Screen-Buttons implementation similar to qemu.hw.mainkeys=1.
(You can use software keys for Back/Menu/Options, by enabling it on the first setup screen.
Main keys will be permanently disabled)
- Merged with latest CM Changes.
[B]August 20, 2016[/B]
- Excluded InputDisabler from build. (Not needed from now on as we found the root of the cause)
- Screen on/off lag reduction. (WIP)
- Fixed SD Card issues and corresponding folder creations on boot.
- Added option to secure unmount external SD before removal.
- Added option to record in-call voice for all regions.
- CPU speed/responsiveness optimizations.
- SELinux denial fixes for other variants too.
- Switched to SELinux enforcing, minized kernel messages and ADB secure (needs su command from now on).
- Optimized latency for audio HAL. No drop-outs from now on.
- Audio effect optimizations. Sound is more crisp.
- Excluded zRAM.
(zRAM caused not needed CPU overhead and heat issues when on Full Brightness+Mobile Data+GPS)
- TWRP bug-fixes.
- Kernel fixes.
- Merged with latest CM Changes.
- Updated stable release name to 2.0.0
[B]July 22, 2016[/B]
- Fixed small freeze on screen unlock.
- Fixed Auto Display Color Calibration.
- Disabled Auto Brightness feature. (No light sensor for J5)
- Raised the perceived loudness by 4db on headphones, and 4db on speaker output.
- Fixed audio minor drop-outs when exiting deep sleep.
- Fixed some firmware link typos.
- Enabled zRAM. (512MB)
- Merged with latest CM Changes.
[B]July 15, 2016[/B]
- Fixed NFC.
- Fixed Keymaster firmware detection.
- Merged with latest CM Changes.
[B]July 14, 2016[/B]
- Fixed moving apps to external SD.
- Added option to choose the default install location of applications in Settings.
- Optimized haptic feedback.
- Fixed front flash camera latency.
- Merged with latest CM Changes.
[B]
June 23, 2016[/B]
- Optimized CPU usage.
- Fixed SELinux Denials.
- Fixed audio latency and quality.
- Fixed QR Scanner display errors and camera related problems.
- Kernel updates.
- Merged with latest CM Changes.
--------------------------------------------------------------------------------------------------------------------------------------------------
Tips :
To activate Developer settings : Settings -> About phone -> press Build number 7 times.
To activate 3-way reboot go to Developer settings and select "Advanced reboot".
Root is included and disabled by default, enable it from Developer settings - Root access.
BusyBox is included.
LiveDisplay is a feature for adapting display colors for night usage.
You can enable it by turning on GPS and data/wifi for some seconds.
Then go to Settings -> Display & lights -> LiveDisplay -> Display mode and change from off to automatic.
Then your phone will know when to adjust your display for night usage through your local GMT zone.
You can also adjust Color Temperature for Day/Night modes.
Screen Cast is a feature to cast your screen to a Smart TV.
Enable Wi-Fi and check Settings->Display & lights->Cast screen->Enable wireless display, connect both devices, and play!

Multi Window Support - J500F
Hi @Nick Verse
First of all, Thank You so much for this awesome rom..
I just have one request..
I'm using J500F (Indian Version)..
Can you add Multi Window Support in the next release of this rom for J500F..??
Thanks in advance..

Just use CM13... lol

Cm 13 is not yet stable, fully working. And dont try to undermine other peoples work.

Hi there
Who can help me to understand and solve the following situation: i want to add spelling romanian language to stock cm12.1 keyboard. Romanian language is available only just as language, for entire operation system, not for spelling purposes (is not in the spelling languages list when i try to add it). So, how can i add it whitout installing another app like Google Keyboard? Is possible?
I use Nicke Verse CM12.1 version from 15.07 on a J500FN.
Best!

y-c-s said:
Hi there
Who can help me to understand and solve the following situation: i want to add spelling romanian language to stock cm12.1 keyboard. Romanian language is available only just as language, for entire operation system, not for spelling purposes (is not in the spelling languages list when i try to add it). So, how can i add it whitout installing another app like Google Keyboard? Is possible?
I use Nicke Verse CM12.1 version from 15.07 on a J500FN.
Best!
Click to expand...
Click to collapse
Propably CyanogenMod official developers didn't add the spelling feature for Romanian language in the official repository! You can contribute in GitHub on your own if you want, or PM a Developer!

abhijeet1331 said:
Hi @Nick Verse
First of all, Thank You so much for this awesome rom..
I just have one request..
I'm using J500F (Indian Version)..
Can you add Multi Window Support in the next release of this rom for J500F..??
Thanks in advance..
Click to expand...
Click to collapse
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!

Nick Verse said:
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!
Click to expand...
Click to collapse
Which most likely will never come from Samsung.
Sent from my SM-J500F using Tapatalk

punmeister said:
Which most likely will never come from Samsung.
Sent from my SM-J500F using Tapatalk
Click to expand...
Click to collapse
Yes! But we'll do something if we can

magix01 said:
Cm 13 is not yet stable, fully working. And dont try to undermine other peoples work.
Click to expand...
Click to collapse
I was referring to adding multi-window support... because it's kinda buggy if implemented on Lollipop...
I never undermine anyone's work and am currently using Nick Verse's CM12...
Sorry for the misunderstanding...

Nick Verse said:
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!
Click to expand...
Click to collapse
Okay.. Thanks..

When will the download links be available?
Sent from my Galaxy j5 using Tapatalk

Very soon
Sent from my SM-J500H using Tapatalk

ayamati said:
Just use CM13... lol
Click to expand...
Click to collapse
please don't mess the thread by giving unnecessary suggestions.

Aasis34 said:
please don't mess the thread by giving unnecessary suggestions.
Click to expand...
Click to collapse
It was a relevant answer to the multi-window question. I don't mess anything.

Updated [Downloads Tab]
Updated SM-J500FN. Next is SM-J500F. Download links will be in the downloads tab from now on.

Audio Latency
We have noticed some longer than usual audio delays a long time ago in CM builds from source.
The main concept is to make the builds as fast responding as possible.
- Currently the audio.primary.msm8916 module is a proprietary blob, because without it in-call audio breaks. (related to proprietary Samsung RIL blobs)
- Disabled AUDIO_OUTPUT_FLAG_FAST, as it is constantly denied in logs even when set in native 44100 sampling rate.
Sources:
https://github.com/Galaxy-J5/android_device_samsung_j5-common
If anyone is familiar with building sources and is aware of the issue, please contact me.

Updated [Downloads Tab]
Updated SM-J500F

@Nick Verse
Thank you for your awesome work!
I think I'll test the new version later.
By the way, I think you should mention in OP how to download, because some people use the old XDA theme (2010), including me (but I know how to download) and they can't see the project tabs unless they switch to at least 2013 theme.
EDIT:
@Nick Verse : When you go to downloads tab, there is download link. You can put it in OP as direct download link, but people will still have to switch to at least 2013 theme. Maybe you can put the link of downloads tab too. It's your choice
PS: limited to thanks button -_-

[OFFICIAL] [Sanders] 9.x||8.x.y || [64bit] || Ground Zero ROMs || Gzosp || Validus

The All-In-One thread for Ground Zero ROMs - Gzosp, Validus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes from the Official Google+ Community:
About the ROMs :
Gzosp is AOSP (including CAF) and is pure stock experience. This is used as base for many other projects.
Validus is GZOSP based with a Wolfie theme and has a lot of features. 
G+ Community
https://plus.google.com/u/0/communities/109330559573276360638
Substratum G+ Community
https://plus.google.com/u/0/communities/102261717366580091389
GZR TWRP Themes
https://onedrive.live.com/?id=67559CDE482EDC1E%21762&cid=67559CDE482EDC1E
George's Validus, Tesla and Tipsy TWRP themes
https://plus.google.com/114004832310481604983/posts/iyFes7Bd89V?sfc=true
https://plus.google.com/114004832310481604983/posts/AEpG9Sgpbmc
https://plus.google.com/114004832310481604983/posts/GTitspyk1aC?sfc=true
Pete Best GZR Sanders Boot Logos
https://drive.google.com/open?id=1MRRarMxFW5pxnT7rr4WNWcki7RDkoZIM
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
MULTIROM Support is discontinued! Use any TWRP recovery available for our device!!
Coming from another rom/clean install:
Reboot to recovery.
Wipe system, cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
Updating from a previous build/dirty flash:
Wipe system, cache, dalvik/art cache in recovery
Flash rom zip, gapps and any other zips you may use
Reboot
Installing through Multirom for Oreo builds...
If you wanted to kept Stock as Primary & GZR Builds on Secondary:
Make sure you do Backup First!
1.Unlock the bootloader via Fastboot Commands Unlock Bootloader
2.Flash Multirom TWRP Recovery via Fastboot CommandTWRP-multirom-sanders-20171016-02.img
3.Flash Magisk V14.0
After booting into recovery, you need to do a factory reset.
Then reboot into recovery again.
Wipe System, Cache, Dalvik/art cache, data
Flash Rom Zip file and gapps
Reboot
Note: If you set Fingerprint + Pattern/ Pin on Primary/Stock then you need to flash a Lock Fix file on Primary
Lockfix.zip
Rooting:
Ground Zero ROMs are not shipped rooted. Flash your favorite root apps like Magisk/SuperSU or any other. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Theming:
Substratum support is there as long as you have root and latest Substratum app. Some themes may have a little catching up to do, have fun testing them!
Reporting Issues:
If you have any issues, grab a log after a clean flash, upload and link here please. Add steps to reproduce the issue in your post.
Do not report issues dirty flashing this over some unofficial build or with some kernel flashed.
Logcat Extreme app is great as you can choose to start recording a log just before reproducing an error and stop recording just after so you log just the part you need.
Few Notes:
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Selinux is permissive for now.
Make sure to state which rom you are running when asking for support
Open Gapps
http://opengapps.org/
Downloads
Pie 9.x
All Gzosp Builds can be found here https://www.androidfilehost.com/?w=files&flid=282442
Note: Fingerprint blobs are updated to Oreo base. Those who have not updated to Stock Oreo and are still with Stock Nougat, need to install FP firmware from here https://www.androidfilehost.com/?fid=1322778262904016554
If you are going back to Oreo ROMs without flashing Stock Nougat, then flash this for FP https://www.androidfilehost.com/?fid=1322778262904016458
Oreo 8.x
All Gzosp/Validus Builds can be found here https://www.androidfilehost.com/?w=files&flid=222164
New Validus/GZOSP Builds can be found here, GZR AFH https://www.androidfilehost.com/?w=files&flid=231002
Source Code:
https://github.com/GZOSP
https://github.com/ValidusOS
Device tree (branch: 9.0)
Kernel (branch: 9.0)
Vendor (branch: 9.0)
Credits
- GZR Team
Thanks to vache for his work on the Device.
XDA:DevDB Information
ValidusO, ROM for the Moto G5S Plus
Contributors
premaca, syed sajid, oadam11
Source Code: https://github.com/GZOSP
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: GZOSP
Version Information
Status: Beta
Current Beta Version: 16.0
Beta Release Date: 2017-10-09
Created 2017-10-17
Last Updated 2018-09-29

*** Change Log ***
PIE 9.x
10.10
Download:
https://androidfilehost.com/?fid=1322778262904024094
- Fixed Moto Actions
- Other source changes and fixes
10.07
Download:
https://androidfilehost.com/?fid=1322778262904021921
- October security patches
- android_r10
- Kernel upstreamed to 3.18.123
- Moved to full treble support
- AOSP Email, default-browser removed
- Minor customisations to AOSP launcher3
- Other source changes and fixes
09.27
Download:
https://androidfilehost.com/?fid=1322778262904015807
- Fixes safetynet
- Fixes installation of magisk modules
- Kernel upstreamed to 3.18.123
- Other source changes and fixes
Note: Fingerprint blobs are updated to Oreo base. Those who have not updated to Stock Oreo and are still with Stock Nougat, need to install FP firmware from here https://www.androidfilehost.com/?fid=1322778262904016554
If you are going back to Oreo ROMs without flashing Stock Nougat, then flash this for FP https://www.androidfilehost.com/?fid=1322778262904016458
09.14
Download:
https://androidfilehost.com/?fid=1322778262904005185
- Initial 9.0 released
- android-9.0.0_r7
- September security patch
- Kernel upstreamed to 3.18.122
*******************************************************************
Oreo 8.x
07.07
- July Security patches
- android-8.1.0_r41
- Blobs update from leaked oreo
- Kernel upstreamed to 3.18.114
- Other source changes and fixes
Gzosp: Stable 1.1 https://www.androidfilehost.com/?fid=5862345805528043123
Validus: 2.6 https://www.androidfilehost.com/?fid=5862345805528043117
Tipsy: 1.2 Cristal https://www.androidfilehost.com/?fid=5862345805528043128
*** GZOSP *** Change Log
04.15
Download:
https://www.androidfilehost.com/?fid=890129502657598219
- Kernel upgraded to 3.18.105
- Launcher3 supports dark mode, hide-apps
- Other source changes and fixes.
04.05
Download:
https://www.androidfilehost.com/?fid=673956719939832864
- April security patch
- android_8.1_r20
- Other source changes and fixes.
02.18
Download:
https://androidfilehost.com/?fid=818070582850493507
- Kernel upgraded to 3.18.94
- CPU frequencies fixed, with 2.0Ghz max
- SIM cards FC in Network & Internet is fixed
- Android upgraded to android-8.1.0_r11
- February security patch
- Other source changes and fixes
11.16
Download:
https://www.androidfilehost.com/?fid=962021903579492991
- r32 November security patches
- FM Radio
- Enhanced Launcher3 with icon support and more options
- Nightlight fixed
- Acdb ids from Stock for fixing audio issues in few VoIP apps
- Gzosp dark theme
- BT in-call fixes
- More Moto Actions
- Display network name on status bar
- Other source changes and fixes
10.18
- Download Gzosp-sanders-8.0.Beta.1.0-OFFICIAL-20171018-0108.zip
- Initial Release
*** ValidusOS *** Change Log
04.15
Download:
https://www.androidfilehost.com/?fid=818070582850507985
- Kernel upgraded to 3.18.105
- Launcher3 supports dark mode, hide-apps
- Other source changes and fixes.
04.06
Download:
https://www.androidfilehost.com/?fid=746010030569967022
- April security patch
- android_8.1_r20
- Other source changes and fixes
03.24
Download:
https://www.androidfilehost.com/?fid=962187416754470763
- Kernel upgraded to 3.18.101
- Android upgraded to android-8.1.0_r18
- March security patch
- Some stuffses
- Other source changes and fixes
02.18
Download:
https://androidfilehost.com/?fid=962187416754461417
- Kernel upgraded to 3.18.94
- CPU frequencies fixed, with 2.0Ghz max
- SIM cards FC in Network & Internet is fixed
- Statusbar Clock options (Center clock etc)
- Statusbar battery options (Circle,BigCircle etc)
- Screen off animation (CRT/Scale/Default)
- Android upgraded to android-8.1.0_r11
- February security patch
- Other source changes and fixes
02.04
Download:
https://androidfilehost.com/?fid=746010030569951604
- Default Home is Launcher3
- Widgets showing is fixed (like calendar, gmail etc)
- Sound Recorder added
- Audio issues some reported should be fixed
- Statusbar Clock customization
- Kernel is reworked from scratch based off Motorola Stock kernel
- Kernel is upstreamed to 3.18.93
- Other source changes and fixes
01.03
- Download Validus-sanders-8.1.Alpha.1.0-OFFICIAL-20180103-0041.zip
- 64bit builds started
- Initial build of 8.1
- Multirom recovery is updated with 64bits which you can use to flash both 32/64bit builds (download - https://www.androidfilehost.com/?fid=889964283620773492)
- Multirom zip, there is no change, we can use the 20171114 released (download - https://www.androidfilehost.com/?fid=889964283620765983)
- You can run any 32/64 bit builds as Primary or Secondary including Stock (only primary)
- GZR 64bit Gapps tested and recommended.
- Other source changes and fixes
- Issues
------------
- Stock Camera picture has orientation issue, use any third party application if you prefer
- Rare failures on Camera pic/video
11.14
- Download Validus-sanders-8.0.Beta.v16.3-OFFICIAL-20171114-1836.zip
- updated Blobs
- Nightlight is fixed
- Version bumped to 16.3
- Smoother animations
- MotoActions Fixes contd.
- Other source changes and fixes
11.09
- Download Validus-sanders-8.0.Beta.v16.2-OFFICIAL-20171109-0934.zip
- November security patches, Android_8.0.0_R32
- ADB over network tile
- fixes to Moto Actions
- kernel updated to 3.18.80
- Other source changes and fixes
11.03
- Download Validus-sanders-8.0.Beta.v16.2-OFFICIAL-20171103-0931.zip
- Fixes in Dark themes
- Fixed Partition size
- Fixed BT audio-calls (in-car)
- Dexpreopt enabled to speed up bootimes
- Kernel upstreamed to 3.18.79
- Other source changes and fixes
10.29
- Download Validus-sanders-8.0.Beta.v16.2-OFFICIAL-20171029-1554.zip
- More gesture actions in Moto Actions
- Dark themes
- System animations
- Slim recents
- Immersive recents
- Long press back to kill app
- RecentSettings: recents panel clear all button tweaks
- Powermenu: Soft reboot/SystemUI restart
- ‎ kernel upatreamed to 3.18.78
- ‎Other ROM changes/fixes
10.15
- Download Validus-sanders-8.0.Beta.v16.0-Official-20171015-0248.zip
- Stock LCD density reduced to 400.
- Nova is the stock launcher now
- Reset battery stats
- Fixed lock screen weather
- Enabled Proximity-wake (Untested)
- HALs updated to latest CAF (picked from Vache)
- Other ROM changes/fixes
- Kernel is upstreamed to 3.18.75
10.09
- Download Validus-sanders-8.0.Beta.v16.0-Official-20171009-0408.zip
- Based on GZOSP
- Weather QS tile
- Navbar tile
- Lockscreen weather
- Dialer: incall vibrtion
- Dialer: auto proximity speakerphone
- increasing ring feature
- First Build, Beta v16.0
- Disable CRC check
- Fsycn on/off
- sioplus, fiops, zen, maple
- Kcal
- Other optimizations
- Upstreamed to 3.18.74

Known Bugs/ Issues:
PIE 9.x
1. On Reboots, VoLTE/HD icon/notification might be missing, but VoLTE calls work.
2. Report in this thread.
OREO 8.x
1. Camera Freezes when focus clicked and took picture - no workaround.
2. Stock Camera picture has orientation issue, use any third party application if you prefer
3. Rare failures on Camera pic/video
4. You tell me... :laugh:

Does dual camera (depth mode) work
What about volte

#VoltePlz...

Versatility of ROM
Do the roms for G5S plus work on G5 Plus or vice versa?

Root_the_f_up said:
Do the roms for G5S plus work on G5 Plus or vice versa?
Click to expand...
Click to collapse
No, its not a unified device..

Looks excellent, downloading Validus now, cant wait to try it out.!

This rom has volte support?

Joyarup said:
This rom has volte support?
Click to expand...
Click to collapse
Yes, bhai. It does support VOLTE and also HD Video Calling via Jio sim

[email protected] said:
Does dual camera (depth mode) work
What about volte
Click to expand...
Click to collapse
syed sajid said:
#VoltePlz...
Click to expand...
Click to collapse
Joyarup said:
This rom has volte support?
Click to expand...
Click to collapse
Yes it does support Volte and was working fine, didn't get any issue while i used
But Stock camers isn't working properly, when delete pix it closes automatically, photos aren't that accurate form stock camera

On XT1805 the rom is very slow.

New Build is UP!!
Sanders (Moto G5S Plus) v16.0 Beta 10/21
- Live Volume Steps
- Network name on Statusbar (Carrier Label)
- Statusbar notification ticker
- Statusbar Logo (various choice of logos)
- Fix Proximity Wake Switch (OFF by default)
- Kernel upstreamed to 3.18.76
Download:
https://www.androidfilehost.com/?fid=962021903579486730

Schrotty35 said:
On XT1805 the rom is very slow.
Click to expand...
Click to collapse
Did u flash Google apps too?
Bcs i tried in both way(with Gapps & without them)
Rom was smooth and buttery with gapps but too stucky without gapps

Depth Enabled Camera functioning ? Does it have Moto Actions ?

mightyjai said:
Depth Enabled Camera functioning ? Does it have Moto Actions ?
Click to expand...
Click to collapse
Yes Moto actions available, but depth enable camera is not yet implemented, its a stock camera function.

syed sajid said:
Yes Moto actions available, but depth enable camera is not yet implemented, its a stock camera function.
Click to expand...
Click to collapse
If we set the stock camera app in system>privapp then also it won't work?

Soham Biswas said:
If we set the stock camera app in system>privapp then also it won't work?
Click to expand...
Click to collapse
It wont work like that, they need some work also...

Soham Biswas said:
If we set the stock camera app in system>privapp then also it won't work?
Click to expand...
Click to collapse
You need to port the libs also.
Maybe for oreo first motorola should release oreo for us and give us the sources.

When updating all that is needed is to wipe dalvik and cache correct? Or if I don't wipe system too will it be a dirty flash update? Just curious thanks! I'm loving the room smooth and fast and stable! ?
One more question is there anyway you get the Verizon brand off the status bar it was nowhere to be found in settings

[ROM][9.0.0][UNOFFICIAL][OCE] LineageOS 16.0 [STABLE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs
What's working:
Boot
Fingerprint Sensor
Camera / Camcorder
VoLTE
Secondary Screen (now it's working as a "Notch/Cutout" like other devices!, this area is now status bar)
RIL (LTE/Dual SIM/SMS)
In-Call Voices/Mic
WiFi
Hotspot (2.4Ghz / 5Ghz)
Bluetooth
Bluetooth Headphone
Type-C Headphone Audio
Hardware Encryption
Audio recording (Camera/Audio recording apps)
GNSS GPS
USB (ADB/MTP/PTP)
Audio (Top and Bottom speaker)
Video Playback
NFC
Sensors
Touch
What's not working:
Double Tap to Wake
VoWiFi (not-tested)
You tell me.
Installation instructions
Upgrade to Stock Oreo Rom!
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions and FORMAT DATA from TWRP of your device (required when coming from stock!).
Flash ROM.
Optional: Install the Google Apps addon package.
Optional: Install Magisk for Root.
Supported models:
ocedugl, ocedtwl, oceuhl
Downloads
Recovery : Unofficial TWRP - Support decrypt
Gapps : Open Gapps 9.0
Rom : Download
Sources
oce device tree: oce
oce kernel tree: oce kernel
htc vendor tree: vendor tree
Donate
DONATE To Me
Big Thanks
LineageOS Team.
Tobias Tefke (ngc4622) for helping me on fixes.
all PME (HTC 10) contributors.
XDA:DevDB Information
LineageOS 16 for U Ultra, ROM for the HTC U Ultra
Contributors
tarkzim
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Stock 8.0.0
Based On: LineageOS
Version Information
Status: Stable
Created 2018-10-19
Last Updated 2019-04-15

Changelogs
2019/08/13
Upstream updates and fixes.
Updated to Android 9.0.0_r46 with August Security Patches.
Fixed Bluetooth idle connectivity issues.
Fixed Default RIL network mode on DTWL variant.
Kernel updates.
2019/07/09
Upstream updates and fixes.
Updated to Android 9.0.0_r44 with July Security Patches.
2019/06/22
Upstream updates and fixes.
Updated Qualcomm WiFi Display HAL. (with better compatibility)
Updated Kernel to 3.18.140.
Fixed VoLTE/VoWiFi issues of previous build.
Removed ANT+ HAL.
2019/06/09
Updated to Android 9.0.0_r40 with June Security Patches.
Upstream updates and fixes.
Added back Qualcomm WiFi Display HAL. (for MiraCast)
2019/05/10
Updated to Android 9.0.0_r37 with May Security Patches.
Upstream updates and fixes.
Updated Kernel to 3.18.139.
Updated full graphics stack from LA.UM.7.5.r1-03700-8x96.0.
Tweaked QSEECOMD, for better encryption/decryption.
Fixed manually network selection for some carrier.
2019/04/08
Updated to Android 9.0.0_r35 with April Security Patches.
Upstream updates and fixes.
Updated Kernel to 3.18.138 with WiFi Stability improvements.
Switch I/O Scheduler to CFQ as default.
2019/03/19
Upstream updates and fixes.
Updated GPS blobs from daisy - 9/PKQ1.180917.001/V10.0.3.0.PDLMIXM.
Removed Qualcomm WiFi Display HAL.
PowerHAL tweaks.
GNSS HAL tweaks.
Imported Boeffla's Wakelock blocker into kernel.
[*]Deep sleep works now, should be no more weird battery drops.
2019/03/14
Upstream updates and fixes.
Updated GPS / Location HAL from LA.UM.7.5.r1-04300-8x96.0.
Updated data-ipa-cfg-mgr from LA.UM.7.5.r1-04300-8x96.0.
VoLTE support Taiwan carriers : FET, APTG, T STAR, CHT, TWM (tested with FET VoLTE sim).
Don't power down SIM on airplane mode.
2019/03/08
Updated to Android 9.0.0_r34 with March Security Patches.
Upstream updates and fixes.
[*]Fixed USB Type-C Headphone/Adapter audio playback issues.
[*]Added NoCutoutOverlay for hiding notch. (enable it from Settings > Developer Options > Simulate a display with a cutout > select "Hide")
Updated GPS HAL from LA.UM.7.5.r1-04300-8x96.0.
Updated Power-off alarm blobs from tissot - 9/PKQ1.180917.001/V10.0.5.0.PDHMIXM.
Updated Audio HAL to 4.0.
Older changelogs:
2019/03/03
Updated Kernel to 3.18.136.
Upstream updates and fixes.
Support CID: HTC_622 / Hong Kong DUGL variant.
Tweaked brightness values.
Tweaks for notch.
Updated Power HAL, battery now last longer in the standby mode.
Added Qualcomm WiFi Display HAL. (for cast)
Updated kernel exFAT drivers.
Reduce boot.img sizes.
2019/02/23
Updated Kernel to 3.18.135.
Upstream updates and fixes.
Updated LineageOS Touch HAL
Added LineageOS TrustUSB HAL.
Improved camera compatibility for some apps.
minor device changes.
2019/02/09
Updated to Android 9.0.0_r31 with February Security Patches.
Upstream updates and fixes.
Add Doze package for AOD.
Sepolicy updates for P. (WIP)
Encryption updates.
2019/01/28 Re-uploaded, fixes boot issues.
Upstream updates and fixes.
Updated Graphic stack from daisy - PKQ1.180917.001 / from LA.UM.7.5.r1-03700-8x96.0.
Updated Kernel to 3.18.133 with Sound Control supported.
Update tftp_server blobs to P from daisy.
Added DTS Eagle audio driver.
Updated & Enabled ZRAM.
Doze/WiFi/Brightness minor tweaks.
Updated media_profile for stereo video recording.
2019/01/17
Upstream updates and fixes.
KCAL: set default RGB values to 220, 220, 220 on boot to prevent burn-in issues.
Updated Kernel to 3.18.132.
Added back missing IMS blobs (VoLTE).
Fixed QSEEComAPI firmware loading issues.
2019/01/10
UPDATE: i have made a mistake on this build, re-uploaded again so the DPM & CNE will work properly.
* you can dirty flash 01/10 build over the build named 01/09.
Updated to Android 9.0.0_r30 with January Security Patches.
Upstream updates and fixes.
Updated CNE/DPM/TimeService from daisy-user 9 PKQ1.180917.001 V10.0.1.0.PDLMIFJ release-keys.
Updated Adreno/Vulkan drivers to LA.UM.7.6.2.r1-03000-89xx.0 for Pie.
Added Power-Off Alarm.
Updated Kernel to 3.18.129 & update CPU sched drivers.
Set minimal clock of GPU to 133Mhz.
Added missing ocedtwl RIL blob.
Snap Camera: support Camera APIv2.
2018/12/16
Updated to Android 9.0.0_r21 with December Security Patches.
Upstream updates and fixes.
Update GNSS HAL to LA.UM.7.5.r1-03700-8x96.0
Kang ims.apk and qti-telephony-common.jar from daisy
Re-enable WiFi-Display
Update widevine blobs from marlin - 9.0.0 (PPR2.181005.003, Oct 2018)
Thermal HAL updates
Add support for aptX & aptXHD
Add permissions for HTC Camera
2018/10/22
Upstream updates and fixes.
Fixed USB Headphone.
Fixed Audio Recording issues (Camcorder & audio apps).
Fixed GNSS GPS.
Added KCAL support.
Updated Kernel to 3.18.124
2018/10/20
initial build LOS 16.0 for oce.

Screenshots
Screenshots here!

Workarounds & Tips
Avoiding data encryption issues, please backup your current ROM to SDCARD or your PC.
If you are facing decryption issue after flashing this ROM, and previous using the Stock ROM, please make sure you have used "FORMAT DATA" on TWRP and wipe Data/System/Cache.
If you are using Custom Kernel or Mods and causing issues, i will not be supporting this.
If you are facing microphone issue while recording videos or audios, please WIPE Cache/Dalvik Cache from TWRP.
for those who wants to join us on Telegram, you can enter from HERE

Yeah

Download doesn't work, can you make a GDrive Mirror?

Does it have ota update?

OK I'm having issues if I flash just the ROM it boots
But if I flash both the ROM and gapps its like its going to go into the ROM but it just boots back into twrp I really want it to work for me

Wow, nice job dude!

panda968 said:
OK I'm having issues if I flash just the ROM it boots
But if I flash both the ROM and gapps its like its going to go into the ROM but it just boots back into twrp I really want it to work for me
Click to expand...
Click to collapse
Latest 9.0 gapps seems have some issues, use older 9.0 gapps.

tarkzim said:
Latest 9.0 gapps seems have some issues, use older 9.0 gapps.
Click to expand...
Click to collapse
sorry where can i found the old 9.0 gapps

panda968 said:
sorry where can i found the old 9.0 gapps
Click to expand...
Click to collapse
Just search in Google.com....
https://opengapps.org/

panda968 said:
sorry where can i found the old 9.0 gapps
Click to expand...
Click to collapse
find it here: old releases
i'm using 10/9 version and its fine.

hi Developer, I am having again same problem with downloading this rom, more than 12 hours needed.......any other mirrors? or other ways to download?

Hi , I am having boot issues too
It doesn't boot with or without gapps
cleaned everything

guojunjay said:
hi Developer, I am having again same problem with downloading this rom, more than 12 hours needed.......any other mirrors? or other ways to download?
Click to expand...
Click to collapse
Here: https://drive.google.com/open?id=1JXAWKu4SvbntvW3afrzhBfc5MXMeBH2G

Ok , it booted without gapps after clearing cache
downloaded and flashed gaps 10/09/2018 but it is rebooting in recovery
Is there ny other gapps?

ForceField said:
Ok , it booted without gapps after clearing cache
downloaded and flashed gaps 10/09/2018 but it is rebooting in recovery
Is there ny other gapps?
Click to expand...
Click to collapse
Gapps 15/10/2018 should work

minhnewpro said:
Gapps 15/10/2018 should work
Click to expand...
Click to collapse
ok thanks , downloading them now
which package ? I am downloading pico

ForceField said:
ok thanks , downloading them now
which package ? I am downloading pico
Click to expand...
Click to collapse
Pico is fine

Better Mobile App

welcome