Note: I am not responsible for any kind of software bricks or world war. LOL
This is the working and stable version of SuperSU v7.9 for 7.1.1 Nougat for SM-G531H/G531F/G530(H,FZ,M).
Requirements:
TWRP v3.0.xx
Flashable SuperSU.zip
SuperSU Binaries
TWRP v3.0.2-0tar.md5: (Odin Flash)
TWRP v3.0.2-0tar.md5
TWRP v3.0.2-0tar.zip: (TWRP or CWM Flash)
TWRP v3.0.2-0tar
Download SuperSU Zip Here:
SuperSU-v2.79-SR3-20170114223742.zip
Alternate SuperSU Zip:
SuperSU-v2.79-SR3-20170114223742.zip
SuperSU Binaries: [Flash after SuperSU]
SuperSU Binary
Direction of USE for First Users:
Copy SuperSU v7.9 SR3.zip and addonsu-arm-signed.zip in extcard or sd card.
Goto download mode using 3 combo butons (power button, volume down button and home button)
Open odin and click on PDA and navigate twrp.
After successful flashing twrp, remove the battery.
Put on the battery and reboot device into recovery mode using 3 combo buttons. (power button, volume up button and home button).
Flash SuperSU v7.9 SR3.zip and after that flash addonsu-arm-signed.zip.
Done.
Congrats!! You have successfully flashed SuperSU v7.9 SR3 on Samsung Galaxy Grand Prime.
Direction of USE for TWRP or CWM Users:
Copy SuperSU v7.9 SR3.zip and addonsu-arm-signed.zip in extcard or sd card.
Reboot device into recovery mode using 3 combo buttons. (power button, volume up button and home button).
Flash SuperSU v7.9 SR3.zip and after that flash addonsu-arm-signed.zip.
Done.
Congrats!! You have successfully flashed SuperSU v7.9 SR3 on Samsung Galaxy Grand Prime.
Wow thanks man ! good job !
Thanks
Thank you bro it works
wow
Thanks myaannn, worked for me... :good: :good: :good:
Update SuperSU Binaries link. It's not working
Related
has anyone got an update binary for the SPG511 which works ?
Maddhouse said:
has anyone got an update binary for the SPG511 which works ?
Click to expand...
Click to collapse
yeah but it was hard.
first upgrade to unrooted .402 (flash .402 with flashtool)
then run easyroot v5 - http://forum.xda-developers.com/showthread.php?t=2784900
i had to do it twice for some reason
next install dual recovery: http://forum.xda-developers.com/showthread.php?t=2785598
it should boot you into recovery after install, if not something went wrong
i think dualrecovery should install the ndrutils app, but if not get it from the play store and set your recovery to twrp
then download supersu from here and sideload http://download.chainfire.eu/supersu
when prompted to update binaries, select twrp/cwm and then load into twrp after reboot (vol down i believe), go to reboot your system and you should be prompted to fix root on reboot
your binaries should then be fixed
G850F/M/W/Y
NOT G850A - locked variant!
Please contribute!
Device information
All G850 variants device information
Flashing tools:
Odin
ODIN TUTORIAL
Install Samsung USB drivers.
Open Odin (older versions of Odin will not work with newer roms).
Reboot phone to Download Mode (Vol Down + Home + Power).
Connect phone to computer.
Do NOT tick repartition. Flash with AP button if firmware is one tar.md5 file.
Stock Roms:
http://www.sammobile.com/firmwares/
Other tools:
How to use Logcat to create bug report for developers
TAR.MD5 Packager Tool
Samsung USB drivers.
Samsung ODB drivers
G850F/M/Y SLTE
G850F/M/Y SLTE Recoveries:
TWRP Recovery
Use packager tool to create recovery.tar from twrp.img if needed.
Uncheck 'Auto Reboot'.
Flash TWRP recovery via AP in Odin(for newer recoveries use latest version of Odin).
After flashing TWRP, reboot to TWRP recovery (Vol UP + Home + Power). Don't reboot to system or it will revert to stock recovery.
G850F/M/Y SLTE Custom Roms:
Lineage OS 14.1
Boot into recovery (twrp 3.0.3 not earlier needs to be flashed with latest Odin).
Wipe data and cache.
Flash LOS-14.1*.zip in recovery.
CyanogenMod 13
Boot into recovery.
Wipe data and cache.
Flash cm-13*.zip in recovery.
CyanogenMod 12.1
Boot into recovery.
Wipe data and cache.
Flash cm-12.1*.zip in recovery.
EpsilROM
Boot into recovery.
Wipe data and cache.
Flash zip in recovery.
G850W SLTECAN
G850W SLTECAN Recoveries:
TWRP Recovery
Use packager tool to create recovery.tar from twrp.img if needed.
Uncheck 'Auto Reboot'.
Flash TWRP recovery via AP in Odin.
After flashing TWRP, reboot to TWRP recovery (Vol UP + Home + Power). Don't reboot to system or it will revert to stock recovery.
G850W SLTECAN Custom Roms:
Lineage 14.1
Boot into recovery.
Wipe data and cache.
Flash LOS-14.1*.zip in recovery.
Lineage 13
Boot into recovery.
Wipe data and cache.
Flash LOS-13*.zip in recovery.
G850S/K/L
G850S/K/L Custom Roms:
CyanogenMod 14.1
CyanogenMod 13
more to be added....
Thanks to
@modpunk
@kyasu
@jjjhitel
@SerenityS
@kitakami
and other developers.
:good:
Big thanks to @modpunk, @kyasu, @jjjhitel.
Questions?
+Added links.
TWRP for G850A
+Added logcat tutorial
Please add RR Lollipop and Marshmallow roms to index, they are amazing roms. Ozcan should be there too, although I've never tried it.
andrwu101 said:
Please add RR Lollipop and Marshmallow roms to index, they are amazing roms. Ozcan should be there too, although I've never tried it.
Click to expand...
Click to collapse
They are outdated.
@kyasu 's Lineage OS builds for G850W work very well!:good:
Here is a Video Of top5 Custom ROms
https://www.youtube.com/watch?v=5pLeK0Q33S0
Sir plz make the pie ROM for exynus verients plz sir
echo124 said:
G850F/M/W/Y
NOT G850A - locked variant!
Please contribute!
Device information
All G850 variants device information
Flashing tools:
Odin
ODIN TUTORIAL
Install Samsung USB drivers.
Open Odin (older versions of Odin will not work with newer roms).
Reboot phone to Download Mode (Vol Down + Home + Power).
Connect phone to computer.
Do NOT tick repartition. Flash with AP button if firmware is one tar.md5 file.
Stock Roms:
http://www.sammobile.com/firmwares/
Other tools:
How to use Logcat to create bug report for developers
TAR.MD5 Packager Tool
Samsung USB drivers.
Samsung ODB drivers
G850F/M/Y SLTE
G850F/M/Y SLTE Recoveries:
TWRP Recovery
Use packager tool to create recovery.tar from twrp.img if needed.
Uncheck 'Auto Reboot'.
Flash TWRP recovery via AP in Odin(for newer recoveries use latest version of Odin).
After flashing TWRP, reboot to TWRP recovery (Vol UP + Home + Power). Don't reboot to system or it will revert to stock recovery.
G850F/M/Y SLTE Custom Roms:
Lineage OS 14.1
Boot into recovery (twrp 3.0.3 not earlier needs to be flashed with latest Odin).
Wipe data and cache.
Flash LOS-14.1*.zip in recovery.
CyanogenMod 13
Boot into recovery.
Wipe data and cache.
Flash cm-13*.zip in recovery.
CyanogenMod 12.1
Boot into recovery.
Wipe data and cache.
Flash cm-12.1*.zip in recovery.
EpsilROM
Boot into recovery.
Wipe data and cache.
Flash zip in recovery.
G850W SLTECAN
G850W SLTECAN Recoveries:
TWRP Recovery
Use packager tool to create recovery.tar from twrp.img if needed.
Uncheck 'Auto Reboot'.
Flash TWRP recovery via AP in Odin.
After flashing TWRP, reboot to TWRP recovery (Vol UP + Home + Power). Don't reboot to system or it will revert to stock recovery.
G850W SLTECAN Custom Roms:
Lineage 14.1
Boot into recovery.
Wipe data and cache.
Flash LOS-14.1*.zip in recovery.
Lineage 13
Boot into recovery.
Wipe data and cache.
Flash LOS-13*.zip in recovery.
G850S/K/L
G850S/K/L Custom Roms:
CyanogenMod 14.1
CyanogenMod 13
more to be added....
Thanks to
@modpunk
@kyasu
@jjjhitel
@SerenityS
@kitakami
and other developers.
Click to expand...
Click to collapse
I have a G850F and a G850Y. I live in Australia. The Y has a Firmware build for Australia which includes the Modem/CP version G850YDOU2BQA1. The F is running a build for Indonesia with the CP version G3850FXXU1COJ5. Will the CP from the Y work in the F? Can I flash it to get compatibility with the Australian 4G networks, or are the modem hardware internals of the F different to the Y? Thanks for any help on this.
Need proper guide to install Magisk.
From sratch. Need halp
Poacmy said:
Need proper guide to install Magisk.
From sratch. Need halp
Click to expand...
Click to collapse
>Go to your ROM thread
>flash firmware
>flash ROM
>flash GAPPS
>flash Magisk
>reboot
>enable Magisk Hide
That wasn't hard at all.
AutumQueen92 said:
>Go to your ROM thread
>flash firmware
>flash ROM
>flash GAPPS
>flash Magisk
>reboot
>enable Magisk Hide
That wasn't hard at all.
Click to expand...
Click to collapse
LineageOS comes with pre root. When I install magisk(the zip one), it doesnt show Supersu inside magisk manager and my SafetyNwt fails because of pre installed supersu
Poacmy said:
LineageOS comes with pre root. When I install magisk(the zip one), it doesnt show Supersu inside magisk manager and my SafetyNwt fails because of pre installed supersu
Click to expand...
Click to collapse
Flash this before flashing Magisk: https://forum.xda-developers.com/showpost.php?p=63615067
AutumQueen92 said:
Flash this before flashing Magisk: https://forum.xda-developers.com/showpost.php?p=63615067
Click to expand...
Click to collapse
Thanks for the help. Did all the process again.
One question, do I need to reinstall another root or Magisk is ok?
Poacmy said:
Thanks for the help. Did all the process again.
One question, do I need to reinstall another root or Magisk is ok?
Click to expand...
Click to collapse
Nah, Magisk's in-built root is good enough. No need to complicate thigs by adding other stuff
AutumQueen92 said:
Nah, Magisk's in-built root is good enough. No need to complicate thigs by adding other stuff
Click to expand...
Click to collapse
If the OS I'm using will get an update, what to do?
Using LineageOS.
Poacmy said:
LineageOS comes with pre root. When I install magisk(the zip one), it doesnt show Supersu inside magisk manager and my SafetyNwt fails because of pre installed supersu
Click to expand...
Click to collapse
LOS isn't pre rooted. If you are using some unofficial version then it might be pre rooted but official version isn't pre rooted
Kapiljhajhria said:
LOS isn't pre rooted. If you are using some unofficial version then it might be pre rooted but official version is pre rooted
Click to expand...
Click to collapse
LineageOS for Redmi Note 4x isnt official yet…
Prerequisites:
Unlocked bootloader (via http://en.miui.com/unlock/)
Working fastboot and adb
Custom recovery, e.g. twrp: https://dl.twrp.me/mido/
Installing twrp recovery on mido
* download the recovery file to your computer, e.g. twrp-3.1.1-0-mido.img
* enter fastboot mode
a) shut down phone
b) press volume down + power button, release power in ~4 after the phone vibrates
c) from terminal type
Code:
fastboot boot twrp-3.1.1-0-mido.img
Magisk Installation:
From the phone download the latest versions of the following files:
http://tiny.cc/latestmagisk
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/ (get latest zip)
As an alternative download the files to your computer and then push them to the phone with:
Code:
adb push /sdcard/Magisk-v14.0.zip
adb push /sdcard/no-verity-opt-encrypt-5.1.zip
Reboot into twrp recovery (`adb reboot recovery` from the computer) and:
1. Flash no-verity-opt-encrypt-5.1.zip
2. Flash Magisk-v14.0.zip
3. Reboot.
If the phone still boots into the Mi Recovery and not into TWRP, then enter fastboot mode and do `fastboot boot twrp-3.1.1-0-mido.img` (with the correct path to the IMG file).
---HELP NEEDED ---
I am not able update magisk to 16.0 , i tried every different way the phone Goes to BOOTLOOP. But MAGISK 14.0 WORKS FINE. PLEASE HELP .
(Redmi Note 4 Snapdragon, 8.1 custom Rom )
Thanks to @ScrewTSW he found at http://www.htcmania.com a working TWRP Recovery from totmakina
found : http://www.htcmania.com/showthread.php?p=27398885
to reboot into recovery most elephones works with hold vol+ and power at the same time.
this method dont work for the S8 and i did not found a working method yet.
but its not a problem if you follow this:
1. download all files and place them on your desktop
2. flash my modified boot.img (magisk root) with flashtools
3. flash TWRP recovery with flashtools
4. reboot the Phone and install magisk manager app (link https://www.apkmirror.com/apk/topjohnwu/magisk-manager/)
5. start magisk manager , it will tell you that your phone has root
6. go to playstore and download the app called reboot recovery ( its a very small app)
7. reboot to recovery.
8. done
ok I will explain what I really did to stuck in this problem 1- install stock rom for my device Samsung j5 (j530f) using Odin and device open normally 2- install magisk apk also install zip file and enable using-debugging button and OEM button 3- install TWRP using Odin also (but I have done a mistake here I am not unticked auto reboot checkbox ) 3-after that I tried to install magisk in TWRP i am not found magisk file as video mentioned i swear I doesn't make anything there so I reboot my system and stuck in it and when I press power while bootlooping he go to TWRP I tried re-install stock rom after wibe all data and format system after Odin finish and reboot !!now go to TWRP direct what should I do
amigo2020 said:
ok I will explain what I really did to stuck in this problem 1- install stock rom for my device Samsung j5 (j530f) using Odin and device open normally 2- install magisk apk also install zip file and enable using-debugging button and OEM button 3- install TWRP using Odin also (but I have done a mistake here I am not unticked auto reboot checkbox ) 3-after that I tried to install magisk in TWRP i am not found magisk file as video mentioned i swear I doesn't make anything there so I reboot my system and stuck in it and when I press power while bootlooping he go to TWRP I tried re-install stock rom after wibe all data and format system after Odin finish and reboot !!now go to TWRP direct what should I do
Click to expand...
Click to collapse
Did you flashed stock rom correctly after bootloop?