Related
Hi there! I bricked my alcatel by deleting a folder which apparently was vital for android. Is there any way to unbrick it without paying a visit to alcatel's service? I need PWM or TWRP to flash it with the stock rom, right? Unfortunately I hadn't installed either, so is there any other way to flash the stock rom now?
nougiw said:
Hi there! I bricked my alcatel by deleting a folder which apparently was vital for android. Is there any way to unbrick it without paying a visit to alcatel's service? I need PWM or TWRP to flash it with the stock rom, right? Unfortunately I hadn't installed either, so is there any other way to flash the stock rom now?
Click to expand...
Click to collapse
download one touch upgrade 2.7.3 and upgrade your phone and u'll get back your original system.. :good:
Call_Me_Hudson said:
download one touch upgrade 2.7.3 and upgrade your phone and u'll get back your original system.. :good:
Click to expand...
Click to collapse
No, the OTUS trick didn't work for me. The only way to fix this is by having the stock ROM which is the 4030X. If anyone has it or has Alcatel One touch S'Pop with 4030X(not A,D,E,Y only X) firmware, please pm me.
nougiw said:
No, the OTUS trick didn't work for me. The only way to fix this is by having the stock ROM which is the 4030X. If anyone has it or has Alcatel One touch S'Pop with 4030X(not A,D,E,Y only X) firmware, please pm me.
Click to expand...
Click to collapse
who was the original ROM firmware from
hhan2220 said:
who was the original ROM firmware from
Click to expand...
Click to collapse
What do you mean? It was android 4.1 for Alcatel One Touch S'Pop. And the code of the ROM is 4030X
4030A is for America
4030D & 4030E is for the dual sim variant of S'Pop (named Glory 2) for Europe and Asia correspondingly
4030Y is the NFC version.
I guess 4030X is Europe and single sim
At this moment I have used 4030E to unbrick it but I have locked networks, no Greek, 2 sim operating system and an S'Pop which says Glory 2 on boot up. It's not very possible I get a warranty-covered fix in this situation.
I can use the rom from any stock 4030X, I'm just looking for a 4030X owner with a non-bricked device to contact me.
nougiw said:
What do you mean? It was android 4.1 for Alcatel One Touch S'Pop. And the code of the ROM is 4030X
4030A is for America
4030D & 4030E is for the dual sim variant of S'Pop (named Glory 2) for Europe and Asia correspondingly
4030Y is the NFC version.
I guess 4030X is Europe and single sim
At this moment I have used 4030E to unbrick it but I have locked networks, no Greek, 2 sim operating system and an S'Pop which says Glory 2 on boot up. It's not very possible I get a warranty-covered fix in this situation.
I can use the rom from any stock 4030X, I'm just looking for a 4030X owner with a non-bricked device to contact me.
Click to expand...
Click to collapse
Now a days handset manufactures customise ROM for different markets they see (sim free) OR the sales channel through service providers (network sales) . they also tweak the ROM loader points accordingly. So the only option for you is to find out where the original ROM backup and try and load it.
Any luck finding the stock ROM for the 4030X model?
d3vil said:
Any luck finding the stock ROM for the 4030X model?
Click to expand...
Click to collapse
No, unfortunately I haven't so far. Could you possibly help me with that?
Hi
Im looking for firmware for this mobile with have polish lang inside...I have the device fully working without lock but i gues is to late.
Ps if You still w8ing for firmware and can copy from my device its ok only tell me how to do it.
arturkolacz said:
Hi
Im looking for firmware for this mobile with have polish lang inside...I have the device fully working without lock but i guess is to late.
Ps if You still w8ing for firmware and can copy from my device its ok only tell me how to do it.
Click to expand...
Click to collapse
You are not late at all. I haven't found anything yet, so I'd be awfully thankful to you if you'd help me.
1)Does your language menu include greek?
2)Does your phone say "onetouch s'pop" when it's starting?(or it says "onetouch Glory2"?)
3)Does your firmware version in settings say 4030X?(or it says 4030E/4030D/4030A?)
nougiw said:
You are not late at all. I haven't found anything yet, so I'd be awfully thankful to you if you'd help me.
1)Does your language menu include greek?
2)Does your phone say "onetouch s'pop" when it's starting?(or it says "onetouch Glory2"?)
3)Does your firmware version in settings say 4030X?(or it says 4030E/4030D/4030A?)
Click to expand...
Click to collapse
1) No
2) Onetouch s'pop
3) Yes its 4030X
arturkolacz said:
1) No
2) Onetouch s'pop
3) Yes its 4030X
Click to expand...
Click to collapse
I've sent you a couple private messages, have you seen 'em? I'm asking because I got no reply yet...
Not much of an android expert, but I recently(as in 5 hours ago) bricked my one touch 4033a and I was pretty frantic. But, you should be able to reset the phone through holding down volume then power. Unless that is not possible as well. I'm not sure if the rom from my provider will be able to help you. PM me if that's possible, and instruct me how to do that.
one touch 4030x
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
clay0001 said:
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
Click to expand...
Click to collapse
I finally took it to the service center and had it fixed. They charged nothing. They didn't even ask anything. This is your best chance if you'd ask me. Yet when I get back home cause I'm away for a couple days, I could possibly send you my backup to try and upload it to your phone, but I have to warn you that this is highly probable to complicate things even more. Think it over and let me know.
I may just do that, phone only a few months old, not been touched rooting wise, sure it may be an app that caused the prob, will have to see if I can find the receipt for it, was only bought as a cheap replacement till I can get a better phone. Don't have much luck with phones, already got two bricked Moto Defy's, Don't know if half my problem is running win7 as a virtual machine on a mac
clay0001 said:
I may just do that, phone only a few months old, not been touched rooting wise, sure it may be an app that caused the prob, will have to see if I can find the receipt for it, was only bought as a cheap replacement till I can get a better phone. Don't have much luck with phones, already got two bricked Moto Defy's, Don't know if half my problem is running win7 as a virtual machine on a mac
Click to expand...
Click to collapse
Don't even think about it. Since you haven't even routed the phone, service center is way your best solution. Do find that receipt!!
[deleted]
[deleted]
clay0001 said:
Hi my onetouch s pop (4030x) is stuck on boot screen, have tried pwr+vol up, factory rset but it still hangs on the boot screen. Have tried update manager it just says I have latest version and quits, so am stuck on boot screen not knowing what to do. it has never been rooted, just stock, not many apps on it either, running Jelly Bean, any help much appreciated.
Thank you
Click to expand...
Click to collapse
Hi there Junior and everybody
I am EXACTLY in the same situation. I was messing with the vold.fstab in order to switch external memory card as internal, and... BRICK!
Blank screen after "Alcatel'SPop" welcome logo. I tryed PWR+VOLUP and then "wipe data/factory reset" (without knowing what that really meant, i have to say and nothnig happened, i am still in stuck in the blank screen.
If i could get a rom image, i guess i could copy it into the external memory card and "apply update form phone memory".. Isn't it?
If so, now the issue is to find the proper rom: Alcatel onetouch S pop (4030X)
Any hint, help, advise?
thank you
Hi,
This phone is brand new and is the WCDMA version of the Golden Warrior. Best value 4G and spec available in mu opinion.
I had the phone delivered to the UK today from China.
I can't for my life root the phone using any method. I also tried to flash the TWRP from china but no luck. Just goes to the original recovery.
It doesn't come with Gapps which is what I am trying to load.
Anyone can help to translate a rooting/recovery from this forum please? http://bbs.lenovo.com/a8
Actually I managed to flash the recovery and can now root
try flash
vian11 said:
try flash
Click to expand...
Click to collapse
I did. If found the SP flash tool and a tutorial on how to flash the chinese recovery. Worked perfectly. I am now rooted and loaded up Gapps.
limestar said:
I did. If found the SP flash tool and a tutorial on how to flash the chinese recovery. Worked perfectly. I am now rooted and loaded up Gapps.
Click to expand...
Click to collapse
can you please link me to the tutorial? im planning on buying this phone too. its very surprising for me that it doesnt come with google apps (do you mean google play - google store - by that?) i though that every android phone comes with this application.
krudanze said:
can you please link me to the tutorial? im planning on buying this phone too. its very surprising for me that it doesnt come with google apps (do you mean google play - google store - by that?) i though that every android phone comes with this application.
Click to expand...
Click to collapse
I used the tutorial in here http://bbs.lenovo.com/a8/t402705/?pid=8512163#pid8512163
You have to flash the recovery twice in a row. There is root and gapps in the same forum.
You need to use Google Translate if you can't read chinese.
limestar said:
I used the tutorial in here http://bbs.lenovo.com/a8/t402705/?pid=8512163#pid8512163
You have to flash the recovery twice in a row. There is root and gapps in the same forum.
You need to use Google Translate if you can't read chinese.
Click to expand...
Click to collapse
Can you upload the files and send us the links?
The files I am downloading from the Chinese website are corrupted.
(also if possible to give guide on the chinese TWRP, and what to do with it).
Also it will be very helpful if you could send the exact URL to the Root guide
and the exact URL for the how to install gapps guide.
Thank you.
I'll be needing this in a few weeks, I ordered one yesterday. Coming from an iPhone too, so it'll be a bit different for me, I wanted a cheap powerful 4G/LTE handset and this seemed to fit the bill quite well.
the phone ain't really that great, my piece has at least one dead pixel, shiny slippery back is just horrible (waiting to buy as soon as possible some replacement), headphones output is just horrible with constant noise/hiss not possible to listen unless you are deaf (compared to zero noise in TCL S950), brightness of display is quite weak (again compared to TCL S950) and let's not forget heavily customized Androd 4.4.2 with tons of crappy Lenovo software (unlike Coolpad F1 which has AOSP Kit Kat), but at least after root you can disable the evil Lenovo app Security which will try to make you commit suicide (btw. don't upgrade it, unless you speak Chinese, since Lenovo engineers are so amazing they can't even provide English from within the update and let's not forget horrid English localization in general and missing any other languages than Chinese and English)
here I wrote review of my new Lenovo A8 aka A806 (WCDMA/FDD-LTE) Golden Warrior bought for 111EUR (shame there is nothing available in better body with normal sound even if I would be willing to pay 20-30% extra for design and better sound) and tutorial HOW TO ROOT LENOVO A806/A8 it with links provided (I am using URL shortener service since XDA won't allow me to link my own tutorial because apparently I am spammer when I wanna help other people):
dwz DOT cn/la806root
Oh, yeah and thank you so much XDA for using Recaptcha which is blocked in China, it makes posting anything useful soo much easier from within China.
I reuploaded mtk fladh tool + twrp recovery with img and scatter file to bunch of international mirrors, link to them is in my review and howto root tutorial on my blog linked in my post above. Whole ZIP package is misding only USB driver which is not rrally necessary and its on plenty of websites to dpwnload.
PeterMarkoff said:
I reuploaded mtk fladh tool + twrp recovery with img and scatter file to bunch of international mirrors, link to them is in my review and howto root tutorial on my blog linked in my post above. Whole ZIP package is misding only USB driver which is not rrally necessary and its on plenty of websites to dpwnload.
Click to expand...
Click to collapse
Thank you PeterMarkoff !!
Can you explain me in stage 1: what is "+ choose MTK_AllInOne_DA.bin"? I didn't understand what it is and I didn't see this file anywhere else.
Thanks again
I am sorry but because of Recaptcha I must post from mobile (where I have free proxy only for few mins), so can't write long posts and they are full of typos, if you have questions better write on my blog.
Open MTK flash tool, change language to ENG which should there already as well in Settings/General/Download "DA DL All with checksum" should be checked. Then just choose as Download-agent MTK Allinone DA bin which is supplied together with MTK flash tool and Scatter-loading file choose alston_fddopen which is in TWRP Recovery folder. Whole process of flashing 2 times is quite straightforward, only major thing which needs to be said is that battery needs to be removed to completely shut down phone (and do this also when phone starts automatically booting after successful flashing), otherwise it didn't worked for me no matter how many times I successfuly flashed phone there always stayed original Lenovo recovery.
In this Chinese thread you have picture tutorial in first post which is selfexplanatory even in Chinese:
bbs lenovo com/a8/t402705/ (replace missing spaces with dots)
Hahah, I see the guy added also photos for Chinese TWRP for international users, since he saw my posts there. Not sure what is possible to see wihout registration to forum. Here is my screenshot how it should look after successful flashing when you can remove battery and do it for 2nd time and then after 2nd time boot into TWRP recovery.
oi57 tinypic com/2z8tix0.jpg (replace missing spaces with dots)
Btw. yesterday I already tried Xposed, but it informed me that A806 is running probably Aliyun OS (CN crap) fork of Android so it's not recommended to install Xposed to avoid bootlops and other things, which I am not missing since it's similar situation with TCL S950 my wife has, she can't run anything higher than Xposed 2.3.1 otherwise it would end up in bootloop, but at least it seem like proper Android and not some Chinese fork.
Special thank you goes out to my Slovakian friend who lives currently in China. You totally nailed it with your tutorial.
Thanks again to you Markoff :good:
a808t
A have a8 golden warrior but td-scdma version. Is td-scdma hardware related or software? Can I flash a806 firmware with a808t unit? Ty in advance
No, you CAN NOT flash A806 firmware into A808T and vice versa, they are different. But there are actually tons of A808T ROMs on Chinese websites, much more than for A806 which is not that popular option in China. You should also know that 3G and 4G in your phone will work ONLY in China, everywhere else in world you have just 2G phone even without 3G.
ic. Is there a custom recovery in english for a808t/a806? The one I saw the that site is chinese
Sent from my GT-N7100 using XDA Premium 4 mobile app
Im hoping that there's any kindess developer would come out with a stable cm rom for A806
solleh.mc said:
Im hoping that there's any kindess developer would come out with a stable cm rom for A806
Click to expand...
Click to collapse
i saw in the net....
http://www.markoff.biz/pivot/entry.php?id=1719&w=my_weblog
---------- Post added at 08:32 AM ---------- Previous post was at 08:29 AM ----------
i have now this phone.....
first impression....
display not good compare to huawei honor 3c and zte v5
sound is loud compare to honor 3c....
or you can try this tutorial.....
SP too]
MTK tool...
later i will feedback you before i used that!
UPDATE!!!!!
do not follow my link....my phone now bootloop
to recover i just follow Chinese Site...it is now ok
next...back up my rom using SP flasher.....
is our phone is locked bootloader?
Note:
Cant install busybox...so cannot backup the ROM
@watusi
you said that you Cant install busybox...so cannot backup the ROM
Maybe you can backup your ROM using TWRP recovery?
nhbgvf said:
@watusi
you said that you Cant install busybox...so cannot backup the ROM
Maybe you can backup your ROM using TWRP recovery?
Click to expand...
Click to collapse
update....can instll busy but different version
now i have back up my ROM using MTK tool
i have problem on TWRP in chinese word
before i have problem....only stuck up logo...i flashed only system data...now my phone ok
Q&A for [ROM][18-12-2013] ZTE V987 (MT6589) custom ROMs (JB)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Blocked in stock recovery mod
Hi everyone,
I'm writing this post because I'm hopeless in this moment. I have my ZTE v987 blocked in stock recovery mod ("android system recovery 3e") with no chance to flash or install any ROM or Firmware.
It happens to me when I tried to reflash CWM Recovery 6.0.3.7 with flash tool to reinstall Bruno Rom instead of MIUI ROM. I needeed to reflash because since when I installed MIUI ROM, the CWM rebooted by itself after few seconds, preventing from install any zip file.
Unfortunately, I flashed preloader and after that, my zte dead (it do not even power on).
However, reading some tread and many, many posts and guides about to unbrick mtk65xx, I find a solution (thanks to Bruno) to raise from the death my smartphone. Basically, I was able to flash my zte using flash tool and "ZTE V987 stock partitions" (posted by Bruno to another member of this comunity) but from that I'm blocked in android system recovery 3e.
Can everyone help me, please?
Thanks a lot
You just need to flash CWM recovery, that's all.
bgcngm said:
You just need to flash CWM recovery, that's all.
Click to expand...
Click to collapse
Thanks for the answer.
I found a solution and now my zte v987 works fine, but I have still some huge problems:
SIM not detected, pttycmd1 not found, NVRAM empty
Unfortunately, the only way to resolve these problems is to get another functioning zte v987 and make a backup with Mtk droid tools. So, I can make a radio and NVRAM restore.
There is nobody in my town with this model of zte smartphone and I can't do nothing to bring back my phone.
If anybody can help me posting this backup, I will appreciate a lot
can i install this rom on my zte v967s
dalexander said:
Unfortunately, the only way to resolve these problems is to get another functioning zte v987 and make a backup with Mtk droid tools. So, I can make a radio and NVRAM restore.
There is nobody in my town with this model of zte smartphone and I can't do nothing to bring back my phone.
Click to expand...
Click to collapse
I don't have V987 anymore, but fortunatelly I kept some old files on the computer. You can find in attachment my old V987 NVRAM backup. After flashing it you should change IMEI numbers.
gautam2010 said:
can i install this rom on my zte v967s
Click to expand...
Click to collapse
No, it doesn't work on V967S.
Hi Bruno :
The camera make me some problems. Could you make a zip to revert stock app?
I wouldn't like to reinstall again and choose it from aroma installer menu.
Thanks in advance!
ZTE V987 locked network
I flashed a different rom this afternoon but I didn't like so I came back to Bruno's . When I restored my backup my phone asks for my pincode and "INSERT BLOCK ME SIM"
I got my unlocked phone so I sent an email to the webpage where I bought it, but I have no idea if they will be able to help me, because I have been flashing my phone.
There is any solution? Any way to get the code or using my simcard without it?
Thanks you for your attention
criscabello said:
I flashed a different rom this afternoon but I didn't like so I came back to Bruno's . When I restored my backup my phone asks for my pincode and "INSERT BLOCK ME SIM"
I got my unlocked phone so I sent an email to the webpage where I bought it, but I have no idea if they will be able to help me, because I have been flashing my phone.
There is any solution? Any way to get the code or using my simcard without it?
Thanks you for your attention
Click to expand...
Click to collapse
Hi, did you solve the problem?
I have the same problem after I flash "HTC ONE M8" firmware. I successful unlock first sim card with 12345678 code, but the second is still locked.
Thank you,
Daniel
Back key
Hi all! This is my first post here at xda forums, so bear with me...
The back key on my V987 does not work anymore. Have anyone had similar problem with this device? Could it be physical fault?
BR,
Kurt
Edit: Ok, found this, have to try it first.
ZTE v987 Grand Quad Lite is Completly Off During flash
Any Body can Please Help How to revert it back all
i have zte v987 phone while flashing of recovery my mobile is get switched off . if i pressed power button also doesnt work
please help me how to rectify this issue
Dear Devs & Members
im trying to port twrp recovery for following device
Oppo F3 ( Cph 1609)
CPU:MT670t
Color Os based on android 6.0
as a newbie or script buddy i was getting many errors while creating twrp recovery. im describing the procedure how i tried. please mention my flaws and improvements need to be taken
Im porting twrp recovery using Carliv kitchen imagex64
i have followed the procedure which was mentioned the below link
http://www.chinaphonearena.com/foru...752-MT6753-MT6795-MT6797-TWRP-MT67xx-tutorial
i repacked recovery and flashed back.. when i reboot to recovery there was an error saying "corrupted image ( boot/recovery) prevents the system from booting manuallu. Please flash the correct image or contact customer service to fix it "
i have tried taking base with different twrp recoveries like oppo f1s twrp By sagargjasani264, which cpu is mt6750 and quitel k10000 pro twrp which cpu is mtk6750t.
please tell me if i need to follow other than procedure mentioned in above link??
"Awaiting for response "
rajeshca911 said:
Dear Devs & Members
im trying to port twrp recovery for following device
Oppo F3 ( Cph 1609)
CPU:MT670t
Color Os based on android 6.0
as a newbie or script buddy i was getting many errors while creating twrp recovery. im describing the procedure how i tried. please mention my flaws and improvements need to be taken
Im porting twrp recovery using Carliv kitchen imagex64
i have followed the procedure which was mentioned the below link
http://www.chinaphonearena.com/foru...752-MT6753-MT6795-MT6797-TWRP-MT67xx-tutorial
i repacked recovery and flashed back.. when i reboot to recovery there was an error saying "corrupted image ( boot/recovery) prevents the system from booting manuallu. Please flash the correct image or contact customer service to fix it "
i have tried taking base with different twrp recoveries like oppo f1s twrp By sagargjasani264, which cpu is mt6750 and quitel k10000 pro twrp which cpu is mtk6750t.
please tell me if i need to follow other than procedure mentioned in above link??
"Awaiting for response "
Click to expand...
Click to collapse
Looks like no one cares about us Oppo F3 users...
RizwanZahid said:
Looks like no one cares about us Oppo F3 users...
Click to expand...
Click to collapse
Indeed... It is...
I was worrying for lack of help
rajeshca911 said:
Indeed... It is...
I was worrying for lack of help
Click to expand...
Click to collapse
Yes... No one does?
Try download tool to flash recovery..
Any updates guys?
Hacker_08 said:
Any updates guys?
Click to expand...
Click to collapse
yes you have official NOUGAT available now
and please TWRP & ROOT for OPPO F3
any 1 please help.
Solution for Oppo F3 restart byself
Hello guys i have a problem after upgrade my phone to Nougat version. After 2 years i use this phone, i never find any problem in daily activities but in several days i found the problem is my phone is stuck in home screen,freezing&restart byself. Do you have solutions for this problems? Thanks guys
oppo f3 root
Please someone find oppo f3 root :crying::crying::crying::crying::crying::crying:
rajeshca911 said:
Dear Devs & Members
im trying to port twrp recovery for following device
Oppo F3 ( Cph 1609)
CPU:MT670t
Color Os based on android 6.0
as a newbie or script buddy i was getting many errors while creating twrp recovery. im describing the procedure how i tried. please mention my flaws and improvements need to be taken
Im porting twrp recovery using Carliv kitchen imagex64
i have followed the procedure which was mentioned the below link
http://www.chinaphonearena.com/foru...752-MT6753-MT6795-MT6797-TWRP-MT67xx-tutorial
i repacked recovery and flashed back.. when i reboot to recovery there was an error saying "corrupted image ( boot/recovery) prevents the system from booting manuallu. Please flash the correct image or contact customer service to fix it "
i have tried taking base with different twrp recoveries like oppo f1s twrp By sagargjasani264, which cpu is mt6750 and quitel k10000 pro twrp which cpu is mtk6750t.
please tell me if i need to follow other than procedure mentioned in above link??
"Awaiting for response "
Click to expand...
Click to collapse
I can port it, but make sure:
-It can unlock bootloader
-Provide me with stock recovery file (extracted from stock rom)
-i port twrp(and orange fox) so at least i know what am i doing.
rajeshca911 said:
Dear Devs & Members
im trying to port twrp recovery for following device
Oppo F3 ( Cph 1609)
CPU:MT670t
Color Os based on android 6.0
as a newbie or script buddy i was getting many errors while creating twrp recovery. im describing the procedure how i tried. please mention my flaws and improvements need to be taken
Im porting twrp recovery using Carliv kitchen imagex64
i have followed the procedure which was mentioned the below link
http://www.chinaphonearena.com/foru...752-MT6753-MT6795-MT6797-TWRP-MT67xx-tutorial
i repacked recovery and flashed back.. when i reboot to recovery there was an error saying "corrupted image ( boot/recovery) prevents the system from booting manuallu. Please flash the correct image or contact customer service to fix it "
i have tried taking base with different twrp recoveries like oppo f1s twrp By sagargjasani264, which cpu is mt6750 and quitel k10000 pro twrp which cpu is mtk6750t.
please tell me if i need to follow other than procedure mentioned in above link??
"Awaiting for response "
Click to expand...
Click to collapse
I can port it, but make sure:
-It can unlock bootloader
-Provide me with stock recovery file (extracted from stock rom)
-i port twrp(and orange fox) so at least i know what am i doing.
Anyone still online?
thinhhdk said:
I can port it, but make sure:
-It can unlock bootloader
-Provide me with stock recovery file (extracted from stock rom)
-i port twrp(and orange fox) so at least i know what am i doing.
Anyone still online?
Click to expand...
Click to collapse
Hi!
If you are still there...
I could use your help...
I'm on STOCK ROM and STOCK RECOVERY...
But, I am rooted vis MAGISK/MTK-SU...
I also have the offiical 7.1.1 (NOUGAT) update, I f you need that...
I would be so grateful to you, If you could try your hand at this for me...
As, You verly well might be aware of...
OPPO DISABLED FASTBOOT on all their newer phones...
:/
Thanks again in advance.
thinhhdk said:
I can port it, but make sure:
-It can unlock bootloader
-Provide me with stock recovery file (extracted from stock rom)
-i port twrp(and orange fox) so at least i know what am i doing.
Anyone still online?
Click to expand...
Click to collapse
I have Sytemless Magisk 0n 7.1.1 OFFICIAL RECOVERY AND ROM via MAGISK...
And, I also have the Complete update file for 7.1.1, Please, Can you help me out here...
I would be very helpful to you for that!
Also, On alll NEWER phones, OPPO disabled FASTBOOT...
So, That's also a problem...
:/
KMAHADH said:
I have Sytemless Magisk 0n 7.1.1 OFFICIAL RECOVERY AND ROM via MAGISK...
And, I also have the Complete update file for 7.1.1, Please, Can you help me out here...
I would be very helpful to you for that!
Also, On alll NEWER phones, OPPO disabled FASTBOOT...
So, That's also a problem...
:/
Click to expand...
Click to collapse
Yes im still here, if you Have root you can bybass having to unlock bootloader completely by using flashtify to flash the recovery, but how do you root it in the first Place?
I dont have the device so i have to do this blind
I only need the stock(newest) recovery
If this is your main phone, im advise you not to do this, because porting recoverys usually have to flash stock rom few times, because of bootloop
thinhhdk said:
Yes im still here, if you Have root you can bybass having to unlock bootloader completely by using flashtify to flash the recovery, but how do you root it in the first Place?
I dont have the device so i have to do this blind
I only need the stock(newest) recovery
If this is your main phone, im advise you not to do this, because porting recoverys usually have to flash stock rom few times, because of bootloop
Click to expand...
Click to collapse
I have root via MTK-SU and MAGISK on Nougat (7.1.1)...
I also have the latest Untouched OTA...
Also, I was wondering...
Is there a way I can extract the stock ROM and modify it‘s contents There...
KMAHADH said:
I have root via MTK-SU and MAGISK on Nougat (7.1.1)...
I also have the latest Untouched OTA...
Also, I was wondering...
Is there a way I can extract the stock ROM and modify it‘s contents There...
Click to expand...
Click to collapse
No, but you can get me the recovery.img from stock rom(the flash one)
Twrp for oppo f3 here : https://twcdt.xyz/twrp-recovery-for-oppo-f3-cph1609-2022-unlocked-bootloader/
How to install:
Note : bootloader must be unlocked
Hi
I wonder if a Twrp recovery is available for mix 2
I know there is one for mix but for the moment i have not found it for mix 2
EDIT : 22.01.2017
Finally Thx to the help of my friend HypoTurtle we have developed the TWRP for MIX 2
Here is the link :
https://drive.google.com/file/d/1UxP...ew?usp=sharing
Install instructions :
- OEM unlock in developer settings followed by 'fastboot oem unlock' via fastboot and 'fastboot flash recovery Twrp Doogee Mix 2.img'
So after you have rooted the kernel install TWRP and enjoy
Hi no replies ?
Nobody is using this nice device ?
I'm using this device and I'm also looking for root and TWRP. But until now I've found nothing.
Thx
It's a really nice device . I'm very happy with it and i hope will be maintained here in xda
I hope for root & twrp also
Yes guys, you're right. I am looking for XDA great stuff for my Doogee Mix2
marco.fortuna said:
Hi no replies ?
Nobody is using this nice device ?
Click to expand...
Click to collapse
yes, i am and i love it but i came into a halt momentarily ... my phone got stuck into a bootloop any help be grateful mate
link or something?.. also anyone found a stock rom for this amazing phone yet? because i havent yet?..
---------- Post added at 02:33 AM ---------- Previous post was at 02:32 AM ----------
it's in nothing but boot loop, where it just keeps restarting over and over and nothing else but if I connect it to computer I can put it into service mode well the screen stays black on phone but at this point only option left is to flash STOCK ROM with SP Flash Tool Software i believe but i'm not very familiar, no others options left but that far as i know?.. oh yeah almost forgot, my phone info is: Doogee Mix 2 the 6gbram+64gbrom Ceramics Black Variant..
any ideas guys?.. any help would be much appreciated indeed.. even just the link or something for STOCK ROM at least to recover this beautiful phone.. please believe me when i tell you coming from samsung models long time this much better phone basically no bloatware that i could find other than just few google apps its pretty much STOCK android...
Stock rom for DOOGEE MIX 2
needrom.com/download/doogee-mix-2-android-7-1-20171213
Wr are looking for a TWRPrecovery ... In needrom you can find also the 03.01.2018 ROM update for MIX2 but is useless for rooting
Please also develop much refine camera app for doogee mix 2 and please make different forum for doogee mix 2
there is no twrp available for Doogee mix 2 but Here is a Rooted kernel which help you to Root Your Phone https://romprovider.com/2018/01/doogee-mix-2/
mark332 said:
there is no twrp available for Doogee mix 2 but Here is a Rooted kernel which help you to Root Your Phone https://romprovider.com/2018/01/doogee-mix-2/
Click to expand...
Click to collapse
this is GREAT mark332 that now we have finally root,
but all we need now is TWRP or maybe even CWM or some
similar recovery with CWM Mixed ..hehe.. anyone remember the old missed Philz Touch recovery?? man that was awesome wish someone
could at least show me how to make or port them to this model
Doogee Mix 2.. btw have Ulefone Power 3 now as well
ANOTHER Monster nice offbrand phone hope this stuff comes to that phone as well... unless someone knows about it some>?..
WE HAVE FOR THIS MODEL NOW ALL WORKING:
#1: Stock Rom
#2: OEM Unlock
#3: Root
now all we need is: missing is: #4 Custom Recovery, Shouldn't
be to hard to obtain i would think since we now have the first three?..
Finally Thx to the help of my friend HypoTurtle we have developed the TWRP for MIX 2
Here is the link :
https://drive.google.com/file/d/1UxPcIm4KmZAKtOjDhqPiYF3cRDyYT9Sf/view?usp=sharing
Install instructions :
- OEM unlock in developer settings followed by 'fastboot oem unlock' via fastboot and 'fastboot flash recovery Twrp Doogee Mix 2.img'
So after you have rooted the kernel install TWRP and enjoy
Great job , thank you very much
Great Thank you
Step 3. Now Reboot Your Phone to Bootloader and Connect to PC with USB.
How can I do that...
Thanks a lot. Works fine.:good:
Hi everybody,
I am stuck at fastboot because I don't have the specific driver. How did you pass that ?
It's an ADB problem ... download the lastest ADB drivers and latest Mediatek USB drivers
Try fastboot devices ... If you don't see your phone you have to work with drivers
marco.fortuna said:
Hi
I wonder if a Twrp recovery is available for mix 2
I know there is one for mix but for the moment i have not found it for mix 2
EDIT : 22.01.2017
Finally Thx to the help of my friend HypoTurtle we have developed the TWRP for MIX 2
Here is the link :
https://drive.google.com/file/d/1UxP...ew?usp=sharing
Install instructions :
- OEM unlock in developer settings followed by 'fastboot oem unlock' via fastboot and 'fastboot flash recovery Twrp Doogee Mix 2.img'
So after you have rooted the kernel install TWRP and enjoy
Click to expand...
Click to collapse
The link is not working. Can you upload a working one?