Hi, I'm sorry for my bad English, I'm with 1 Moto And first generation that after being looped I was able to unblock and install TWP, and put the Lolipop Rom 5.1, installed without errors, but when I started the android, I set it up and then when I restarted it Device it enters that white screen that appears that the bootloader was unlocked and falls straight into TWRP, does not start Android at all, could they help me? thanks
Nikakz said:
Hi, I'm sorry for my bad English, I'm with 1 Moto And first generation that after being looped I was able to unblock and install TWP, and put the Lolipop Rom 5.1, installed without errors, but when I started the android, I set it up and then when I restarted it Device it enters that white screen that appears that the bootloader was unlocked and falls straight into TWRP, does not start Android at all, could they help me? thanks
Click to expand...
Click to collapse
1. Flash stock lollipop
2. Reboot bootloader
3. Volume up select, Normal powerup
Rajendran Rasa said:
1. Flash stock lollipop
2. Reboot bootloader
3. Volume up select, Normal powerup
Click to expand...
Click to collapse
Guy
Ok, thanks I'll try
Nikakz said:
Guy
Ok, thanks I'll try
Click to expand...
Click to collapse
I tried, accept the installation of Rom, but it is on the screen of the logo starting and it does not leave, I do not know what to do to work.
Nikakz said:
I tried, accept the installation of Rom, but it is on the screen of the logo starting and it does not leave, I do not know what to do to work.
Click to expand...
Click to collapse
Sometimes a new flash takes nearly half an hour to boot. I faced once.. Did u wait for sometime?
vyshak.sk said:
Sometimes a new flash takes nearly half an hour to boot. I faced once.. Did u wait for sometime?
Click to expand...
Click to collapse
Yes, I waited more than 24 hours and nothing and no other flash I tried installs only this one and does not leave the startup logo, very strange this device, I needed a solution.
Nikakz said:
Yes, I waited more than 24 hours and nothing and no other flash I tried installs only this one and does not leave the startup logo, very strange this device, I needed a solution.
Click to expand...
Click to collapse
Flash latest twrp 3.x. You can find it from official lineage os thread under original development section.
Then flash any stable marshmallow custom rom.
_sushan_ said:
Flash latest twrp 3.x. You can find it from official lineage os thread under original development section.
Then flash any stable marshmallow custom rom.
Click to expand...
Click to collapse
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Nikakz said:
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Click to expand...
Click to collapse
Looks like you are using a very old cm 13 build.
Try this one. https://www.androidfilehost.com/?fid=385035244224413102
This is cm 13 snapshot build by @Andersonmends.
Clean install is recommended ie wipe cache data internal and then flash this with pico gapps
Nikakz said:
Hello everyone, I put a CM13 and she accepted the installation and updated the TWRP also, I put the gaps, I did everything, Android starts, but continues with the problem of falling straight into recovery and going to TWRP and something else when I can do it Start it is not with network signal, recohece the chip, but does not give network signal. I do not know what to do with this device anymore. Could you try to install lolipop on it? Which version could I put? Would it be because of being in 6? I installed this rom cm-13.0-20161022-NIGHTLY-condor only installed it right. thanks
Click to expand...
Click to collapse
You flashed latest twrp inside old twrp recovery itself?right?
Rajendran Rasa said:
You flashed latest twrp inside old twrp recovery itself?right?
Click to expand...
Click to collapse
Yes. Out the problem now with the network signal that is not picking up, it recognizes the chip, but it is without signal.
Nikakz said:
Yes. Out the problem now with the network signal that is not picking up, it recognizes the chip, but it is without signal.
Click to expand...
Click to collapse
Flash radio files. Google it for ur device.
_sushan_ said:
Looks like you are using a very old cm 13 build.
Try this one. https://www.androidfilehost.com/?fid=385035244224413102
This is cm 13 snapshot build by @Andersonmends.
Clean install is recommended ie wipe cache data internal and then flash this with pico gapps
Click to expand...
Click to collapse
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Nikakz said:
Hello everyone, I installed Rom CM that the forum colleague indicated and the gapps and installed, everything went well in the installation and initialized Android, was very good in relation to the previous problems, nor know how to thank you. Just when I call it goes to the screen of the fastboot direct and I do not know how to make it not happen, but at least when the motorola logo appears it starts Android. I only notice a certain oscillation in the signal of the network of the operator and I did not find any file to download and to solve this problem of the signal of the network (or radio as you say) if they know where under some that can be installed for that Rom I thank you. I'll leave it for now and see if it's fixing. Thank you very much, ah, I would like to know if I should install the CM updates that appear on the device, it was so good that I'm afraid to accept it and thunder to give it a problem. Another thing he had TV, how to install this Rom? thanks
Click to expand...
Click to collapse
You can try flashing radio files.
Find one for your device from this thread : https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
I m not sure why ur device is rebooting in fastboot. Generally the most common cause for reboot in moto e is faulty lock button. But that jst reboots the phone. You can try using the phone without pressing the lock button. Use volume key wake up option and double tap to status bar to lock.
Also did you wipe cache data internal before flashing ?
And regarding the updates it depends on you. The updates you are for sering are for cm 14 / lineage os. I personally believe that nougat is still not stable enough and features are still missing hence i advised you for mashmallow roms. But if you want to try u can visit the various threads in android development and android development sections and will find nougat roms.
For installing / flashing instructions read guides in general section.
_sushan_ said:
You can try flashing radio files.
Find one for your device from this thread : https://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
I m not sure why ur device is rebooting in fastboot. Generally the most common cause for reboot in moto e is faulty lock button. But that jst reboots the phone. You can try using the phone without pressing the lock button. Use volume key wake up option and double tap to status bar to lock.
Also did you wipe cache data internal before flashing ?
And regarding the updates it depends on you. The updates you are for sering are for cm 14 / lineage os. I personally believe that nougat is still not stable enough and features are still missing hence i advised you for mashmallow roms. But if you want to try u can visit the various threads in android development and android development sections and will find nougat roms.
For installing / flashing instructions read guides in general section.
Click to expand...
Click to collapse
Okay, thank you, it stabilized the signal from the network operator. I will leave as is and will not make updates at the moment. I just want to know how to make the TV function work. Thanks everyone for the help and I do not know how to mark a topic as closed in the forum.
Related
edit - problem solved......
biggary said:
Hello there, long time member of XDA, but a new user of Honor 5x - Nice to see some devs create some nice roms....but I have a problem.....
I unlocked bootloader via the proper way, and its flashed, rooted etc, and its happily running the newest resurrection remix rom.....but.....
I went to download the great modaco roms by @paulobrien , done what was said, but the phone reboots, and it does the splash screen thing....and thats it....as far as it goes, I try leaving for half a hour, but still nothing......
sometimes i get the error in TWRP that /system cant be mounted, and although it flashes, when rebooting, it says NO OS installed, so i flash it again, and no error but, reboots and sticks at the 'HONOR' logo....
My model is L21, when i clean for a new rom, I advance wipe all sections except internal and external memory, and i also do a factory reset, as I have done with many many other phones
is there a step i am missing? i have read about swap - what is that?
All I want is a nice stock rom which i can debloat, install the htc home launcher, and a few useful apps.....
Who can help me???
Click to expand...
Click to collapse
If you wipe system before flashing the rom you get that error
don't wipe system the rom does it for you
to flash the rom after wiping the system choose reboot / recovery now the rom will flash
Arobase40 said:
"Honor 5x running Resurrection Remix Marshmallow"... ^^
Click to expand...
Click to collapse
@Arobase40 I know my Sig says runing RRemix, but what im asking for, is going back to a stock rom, i can flash any of the CM based roms, but have problems when returning to stock.
Sorry about that kinda title, but m desperate here. An issue that's been driving me nuts.
Even willing to pay for this mess to get over (Pls don't get me wrong for this). I have a moto 360 2nd gen. It pairs fine with the phone and gets all the notifications alright, however when I try to answer or reject calls or even silent them from the watch, nothing happens on the phone, it just keeps ringing.
I have tried the following ROMS on my Oneplus One:
I) Resurrection remix with android 6.0.1
2) CM 13, snapshot as well as nightly.
3) Darkobas failed cos unable to switch on Bluetooth on that
4) CM 12.1 snapshot.
5) Paranoid Android
Have tried all sorts of Gapp apps as well, stock, pico, micro, slim. Watch has been reset an equal no. of times too.
Watch works fine with other phones with their android versions.
Last attempt resulted in answering, rejecting and silencing calls only when the phone screen was unlocked and awake, as soon as the phone locks, the problem comes back again.
Once again, pls help.
vineet296 said:
Sorry about that kinda title, but m desperate here. An issue that's been driving me nuts.
Even willing to pay for this mess to get over (Pls don't get me wrong for this). I have a moto 360 2nd gen. It pairs fine with the phone and gets all the notifications alright, however when I try to answer or reject calls or even silent them from the watch, nothing happens on the phone, it just keeps ringing.
I have tried the following ROMS on my Oneplus One:
I) Resurrection remix with android 6.0.1
2) CM 13, snapshot as well as nightly.
3) Darkobas failed cos unable to switch on Bluetooth on that
4) CM 12.1 snapshot.
5) Paranoid Android
Have tried all sorts of Gapp apps as well, stock, pico, micro, slim. Watch has been reset an equal no. of times too.
Watch works fine with other phones with their android versions.
Last attempt resulted in answering, rejecting and silencing calls only when the phone screen was unlocked and awake, as soon as the phone locks, the problem comes back again.
Once again, pls help.
Click to expand...
Click to collapse
Somebody, anybody pls. ??
Have you tried with stock, oxygen os? If it works there, then you have a "file shortage" on your current ROM, you'll need to copy some files over from there.
Tried MIUI ROM based on KitKat and that works, didn't attempt oxygen OS cos that would require moving to a different recovery other than TWRP n I then wudnt be able to attempt all these ROMS without it. Can I somehow try and copy these missing files over onto my current ROM ? N wud u be kind enough to tell me how n which ones to copy?
vineet296 said:
Tried MIUI ROM based on KitKat and that works, didn't attempt oxygen OS cos that would require moving to a different recovery other than TWRP n I then wudnt be able to attempt all these ROMS without it. Can I somehow try and copy these missing files over onto my current ROM ? N wud u be kind enough to tell me how n which ones to copy?
Click to expand...
Click to collapse
Well, you said something about the watch using Bluetooth right? I'll see what I can do, right now I am at the airport about to board a 5hr flight so I'll see tomorrow what I can do.
Sent using a ks01lte (gt-i9506) running cm 13
Jee that wud be great, hoping to hear from u soon. N a safe journey ahead.
vineet296 said:
Jee that wud be great, hoping to hear from u soon. N a safe journey ahead.
Click to expand...
Click to collapse
Thanks! Made it safely and I looked it up and in your ROM that works, copy all fils that have the name bluetooth in it from /system/lib to the ROM that doesn't work and report back to me.
Hi again, as suggested I looked for all files that had the name Bluetooth in the system/Lib folder in MIUI ROM (KitKat based) and found only one by the name Bluetooth.default.so, I copied that over and replaced it in the current Resurrection ROM (Marshmallow) on my phone at the same location. Now Bluetooth won't switch on and keeps switching back off immediately. Tried to undo the process but still unable to switch on the Bluetooth now. What should we try next?
vineet296 said:
Hi again, as suggested I looked for all files that had the name Bluetooth in the system/Lib folder in MIUI ROM (KitKat based) and found only one by the name Bluetooth.default.so, I copied that over and replaced it in the current Resurrection ROM (Marshmallow) on my phone at the same location. Now Bluetooth won't switch on and keeps switching back off immediately. Tried to undo the process but still unable to switch on the Bluetooth now. What should we try next?
Click to expand...
Click to collapse
There is a directory called "/etc/bluetooth", copy it to your ROM and report please , I am feeling that we are getting closer to solving the issue.
Did so, still the Bluetooth wudnt switch on. next is?
vineet296 said:
Did so, still the Bluetooth wudnt switch on. next is?
Click to expand...
Click to collapse
Was bluetooth on while you were copying the files?
Might have been, can't say for sure but I guess it was switched off, but yet again not sure.
vineet296 said:
Might have been, can't say for sure but I guess it was switched off, but yet again not sure.
Click to expand...
Click to collapse
Well, f***, it needs to be off otherwise that happens.
Ohk. Now is there some way we can do something or I'd hv to wipe and install the entire ROM before we can try once again?
vineet296 said:
Ohk. Now is there some way we can do something or I'd hv to wipe and install the entire ROM before we can try once again?
Click to expand...
Click to collapse
I think you will have to wipe everything (system, data, cache, dalvik, preload) and start over again.
Alright, as u say, I'll make an attempt once again today and copy the files over as u said ensuring that Bluetooth is switched off during the entire process and then report back to u. N m thankful u walking me thru this.
vineet296 said:
Alright, as u say, I'll make an attempt once again today and copy the files over as u said ensuring that Bluetooth is switched off during the entire process and then report back to u. N m thankful u walking me thru this.
Click to expand...
Click to collapse
Yea, if that doesn't work, we'll have to dig way deeper, but since you said that it worked on the other ROM this should be it. I know how hard it is to be stuck in a problem that there is no info about on the internet.
It is, I was like how come m the only one facing this, nobody else in the whole wide world of Google. Ok before I do this, just to recap, fresh install the Resurrection Remix ROM, n before I even switch on the Bluetooth, copy all the Bluetooth files over from those two locations of the working ROM which u told me about and then try the Bluetooth, right?
vineet296 said:
It is, I was like how come m the only one facing this, nobody else in the whole wide world of Google. Ok before I do this, just to recap, fresh install the Resurrection Remix ROM, n before I even switch on the Bluetooth, copy all the Bluetooth files over from those two locations of the working ROM which u told me about and then try the Bluetooth, right?
Click to expand...
Click to collapse
Affirm sir, crossing my fingers hoping it will work .
RAZERZDAHACKER said:
Affirm sir, crossing my fingers hoping it will work .
Click to expand...
Click to collapse
Tried, did it while Bluetooth was switched off, copied the Bluetooth.default.so file from system/lib of the working ROM along with the entire Bluetooth folder from etc/ to the same location of the non functional ROM, but just as last time, now not able to switch on Bluetooth all together. Back to Base unfortunately
Hi guys
I have problem with my touchscreen when the antenna switch between 2G 3G 4G when someone call me or I receive sms, specially when data connection is active...
for example when my sim card is on 4G and someone calling, the antenna switch to 3G or 2G witch is normal BUT the phone touch itself and may be reject the call automatically...
I flashed my phone to 7.0 and 7.1.1 more than 3 times but it didn't fixed...
Does anybody have this problem??
Is it a bug from android 7 ???
should I flash to 6.1.1 ????
plsss help!!!:crying:
please give details
1. how are you flashing? seems like your boot is unlocked
2. if yes, then wipe everything and start fresh (userdata, master reset, all options)
3. if you have already done that then try different region's stockrom (xperifirm) and flash that one. (we have now two 7.1.1 rom released)
YasuHamed said:
please give details
1. how are you flashing? seems like your boot is unlocked
2. if yes, then wipe everything and start fresh (userdata, master reset, all options)
3. if you have already done that then try different region's stockrom (xperifirm) and flash that one. (we have now two 7.1.1 rom released)
Click to expand...
Click to collapse
1. with flashtools latest version... I flashed the Official rom, so does it matter the boot is locked or not?
2. I wiped everything such as user data, logs, qnovo, ...
3. now im gonna flash android 6, I'll try and then answer you what happen
mahdi0214 said:
1. with flashtools latest version... I flashed the Official rom, so does it matter the boot is locked or not?
2. I wiped everything such as user data, logs, qnovo, ...
3. now im gonna flash android 6, I'll try and then answer you what happen
Click to expand...
Click to collapse
the reason i asked about boot unlocked status is to make sure no foul play was done with device! for example with unlocked bootloader thirparty roms can be flashed LINEAGE , X roms and if they ever had, chance may be that touch/wiz has been compromised.
if you had dropped your phone touch goes crazy.
so it was a question just to answer many doubts automatically.
if its not hardware problem then android 6 would work just fine
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Atronid said:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Click to expand...
Click to collapse
Thanks for your reply!
Yes, I do have used ROMs compatible with my device as they've all are made for espresso3g (which is my device).
I know it's not really the best way but I'll keep on trying with custom recovery for some more time and then perhaps try buying a new cable, and see if that works.
Tried installing Google Play Store from APK both on a clean ROM without GApps and with, but it still doesn't run and keeps on saying that either Google Play Store or "com.google.process.gapps" has stopped.
Alright...
I'm out of idea x/
lordquestionmark said:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
r&xp said:
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
Click to expand...
Click to collapse
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first seems to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
lordquestionmark said:
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
Click to expand...
Click to collapse
Ok...
This is what I would do if it was my device and I was facing what you are describing. It might take some time and a little patience to do everything described here, but it might also work.
1. Usin Odin, flash latest available official rom for the device. Let it boot and complete setup.
2. Use odin and use CF autoroot to root. Again boot and complete setup.
3. Flash Twrp. Enter Twrp and flash latest flashable supersu.zip. At this time I believe is version 2.82. Again boot and let it reach your welcome screen.
4. Enter Twrp. Enter advanced wipe. Wipe everything except external SD and usb at least 3 times. Do not exit twrp.
5. Install you rom. Do not exit Twrp.
6. After installing your rom, Twrp will ask you if you want to wipe cache/dalvik. "Yes" but DO NOT reboot.
7. Install correct version of gapps for your custom rom (correct both android version and architecture version). Again twrp will ask you to wipe cache/dalvik. "Yes" and this time reboot.
See what happens. If it gets stuck, try entering twrp again and do a factory reset only, only once and reboot again.
If that fails again... I will at a loss here myself too...
I did a quick search here on xda on P5100, I am providing some links that you can take a look at. You probably already searched yourself but you never know...
https://forum.xda-developers.com/ga...-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-blissmallow-t3312320
https://forum.xda-developers.com/showthread.php?t=1686514
https://forum.xda-developers.com/showthread.php?t=2581782
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-candy-5-v2-5-5-t3136904
If nothing else helps, perhaps the best way to go around this would be to find a custom rom with at least some google apps pre-installed, in order to save you the trouble you are currently facing.
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
did you find a solution
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hey, just try uninstalling Google play services and install them again. I faced the same issue and now it's all working on my Samsung Galaxy Core 2
Kinda newbie to the whole custom ROM world. I was recently given a NEXUS 9 that was unwanted. The device worked fine, just had a very old Cyanogenmod build. I updated it to the latest TWRP (3.3.1.0) and loaded lineage-16.0-20180812. The OS load fine but the touchscreen is unresponsive. I can't "unlock" the screen by swiping. No errors during install and I can still ADB and fastboot. Tried rebooting a number of times and went though the process to reflash..no luck. Any suggestions would be greatly appreciated.
jasonsamuel.email said:
Kinda newbie to the whole custom ROM world. I was recently given a NEXUS 9 that was unwanted. The device worked fine, just had a very old Cyanogenmod build. I updated it to the latest TWRP (3.3.1.0) and loaded lineage-16.0-20180812. The OS load fine but the touchscreen is unresponsive. I can't "unlock" the screen by swiping. No errors during install and I can still ADB and fastboot. Tried rebooting a number of times and went though the process to reflash..no luck. Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
My opinion is: First,flash the stock rom , and then you can install the custom rom you want from the beginning with the correct way...
daitalos said:
My opinion is: First,flash the stock rom , and then you can install the custom rom you want from the beginning with the correct way...
Click to expand...
Click to collapse
This did not work for me
[email protected] said:
This did not work for me
Click to expand...
Click to collapse
I do not understand what exactly you mean
What is your problem on this device?