Related
Hi,
I had that mobile with android 4.42 kitkat with emui 2.3 (from aliexpress). I tried root my mobile (vroot doesn’t work). Now I have problem with CWM. I’ve loaded recovery from that movie youtube.com/watch?v=1l0oD1XumNo All successfully – any errors. From that time I can’t load recovery mode. VolUp + Power results, the phone doesn not start. I see only Huawei logo and mobile stop on it.
I read that I must load rom from that link: emui.com/plugin.php?id=hwdownload&mod=detail&mid=32 (but I can’t download him - downloading freezes on few mb).
I would like to restore the original recovery and next root phone. It is possible to have the root and better recovery on android 4.42 kitat +official emui 2.3 ?
If not I want to change the rom to MIUI, but without recovery I can’t do that. Please help me.
Sorry for my bad English
Tanks
you have to try flash TWRP recovery
http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773
hello , i have kll-21 ( GR5 ) and this is my problem , http://forum.xda-developers.com/hon...ot-problem-t3398489/post67334798#post67334798
"
hello
i downloaded the marshmallow ROM 1.6 GB and flash it also unlocked the boot-loader and install twrp recovery and everything is perfectly fine !
i remember that my devices do not support OTG , so i follow a post here and install a custom kernel to enable it and then the devices go into boot loop
so i open the twrp recovery and flash the update.zip and su.zip in the same time , and after that the devices opened ! but it last about 15 sec and shutdown and no wife or cell is available !
i can open fastboot
i can flash twrp recovery , but it wont open
HELP :'(
update : i managed to boot into twrp from fastboot and install the update.zip , but the same problem . it says that it has low battery and shutdown immediately
update 2 : i wiped the system from twrp in order to install the update.zip from start , but now i think i have no OS , and the device wont start and the twrp wont to flash the update.zip !
update 3 : i managed to get into EMUI recovery mod and do factorey reset but it freeze on 99%
update 4 : i've been able to install Resurrection ROM and it worked but i want the stock marshmallow back ! no shutdowns and wifi works fine
"
now i have tried this stock rom from this post -> http://forum.xda-developers.com/honor-5x/development/rom-stock-b151-stock-rooted-deodexed-t3355130
" KIW-L24-B151-Stock (Boot.img - System - System/Priv-App Only) " , as the writter said i can install it on l21 just the stock
so i did and flash it but it stuck at the Honor logo
help me or teach me what should i do !
ty
up , please help me
mrelitejo said:
up , please help me
Click to expand...
Click to collapse
Did this work ?
http://forum.xda-developers.com/showpost.php?p=67628968&postcount=158
clsA said:
Did this work ?
http://forum.xda-developers.com/showpost.php?p=67628968&postcount=158
Click to expand...
Click to collapse
no it did not work !
sorry i was sleeping
Connect your mobile with pc
And go fast boot
Flash cust.img boo.img system.img recovery.im by adb
And reboot
Remember . use all files from original stock rom KII-L21 In last firmware you installed it
It will working again
Thats was same my problem with wrong kernel
Sent from my HUAWEI KII-L21 using Tapatalk
lamar3bdo said:
Connect your mobile with pc
And go fast boot
Flash cust.img boo.img system.img recovery.im by adb
And reboot
Remember . use all files from original stock rom KII-L21 In last firmware you installed it
It will working again
Thats was same my problem with wrong kernel
Sent from my HUAWEI KII-L21 using Tapatalk
Click to expand...
Click to collapse
i solve it
i restore the 5.1.1 TWRP backup then i flash the MM update
after thet i factory reset it and everything works fine
i'll upload a stock TWRP backup for MM update for my KII-L21 to the form asap
Thanks all
i have a problem with google applications
all applications are up to date :3
but they give me a message that the application won't works unless you update google play services , do you have any idea what can i do ?
Download google play services from any apk site
And install it
Try it
Sent from my HUAWEI KII-L21 using Tapatalk
I just bought a Huawei Mate SE which is a newer phone that looks like the Honor 7x. I've noticed whenever I search for Huawei Mate Se custom roms, recoveries, and even stock roms I only find Mate 9 stuff and find my self desperate with no support of root, and anything else. I found an article called "How to : Huawei Mate SE Root & TWRP Recovery" , and I successfully unlocked the bootloader, and I successfully installed twrp. The text on the bottom I didn't see which said to install the dm-verity thing. I ran into the problem where there were all these folders were displaying weird text in the main partitions, so instead of installing the version they told me, which was the no-verity-opt-encrypt-4.1.zip, I installed the latest which was the no-verity-opt-encrypt-6.0.zip version, which soft bricked. So I thought I could fix this by installing a custom ROM. But there were none, so I tried to install cm13 honor 7x rom and It didn't work. I tried installing the correct version after the rom. So even now if I tried to revert the old boot img it still wouldn't work because of the rom. However, since my bootloader is unlocked there is definitely a way I can fix all this. But the problem is their is not any Huawei Mate SE roms anywhere. I need a stock rom for my phone (possisbly a custom rom), or some fix. I can access my recovery, and the bootloader, but not anything else. My model is the BND-L34, pls help.
I did the same thing. Got it working
Put this in twrp back up folder on external SD card. Restored both files then factory reset in twrp. It worked for me every thing works. unzipped with Windows pc
Can't post links. Post [EMUI 5.1] OTA Firmwares and Unbrick Phone method. In Huawei 7x thread post#139 by AlexxC might be easter to search his posts. I have mate se in us on tmo/MetroPCS I flashed the correct 4.1 and still got soft brick. That article cost me couple hours. rooted with honor 7x method. Guess it really is the same phone with extra gig of ram. To AlexxC thanks, you the man
bradass402 said:
Put this in twrp back up folder on external SD card. Restored both files then factory reset in twrp. It worked for me every thing works. unzipped with Windows pc
Can't post links. Post [EMUI 5.1] OTA Firmwares and Unbrick Phone method. In Huawei 7x thread post#139 by AlexxC might be easter to search his posts. I have mate se in us on tmo/MetroPCS I flashed the correct 4.1 and still got soft brick. That article cost me couple hours. rooted with honor 7x method. Guess it really is the same phone with extra gig of ram. To AlexxC thanks, you the man
Click to expand...
Click to collapse
I tried the manual method of unbricking with multi touch and the phone booted, but it is a black screen, and I only see the home, back and tabs buttons. So after i figured out to use the backup that you sent me and it still wouldn't boot.
Are you getting errors in twrp restore you have to mount the partitions that your restoring boot system data etc
bradass402 said:
Are you getting errors in twrp restore you have to mount the partitions that your restoring boot system data etc
Click to expand...
Click to collapse
i did what you said in the pm, and got the cust.img flashed, but now it bootloops to the recovery
tomjfmu said:
i did what you said in the pm, and got the cust.img flashed, but now it bootloops to the recovery
Click to expand...
Click to collapse
Why dont you boot into huawei eRecovery? It downloads the firmware and recovery and recovers your phone.
Hello.
My honor 9 (stf al00) cant boot. It stuck on huawei erecovery.
I've tried hard reset, wipe cache & wipe data but still stuck.
And also I dont have the driver.
Can anyone please help me.
What happened before ?
You were on nougat or oreo ? which build ?
Which region ? C00 ? or rebranded C432 or else ?
oslo83 said:
What happened before ?
You were on nougat or oreo ? which build ?
Which region ? C00 ? or rebranded C432 or else ?
Click to expand...
Click to collapse
I dont know what happend, give my brother use for awhile, suddenly he return to me with this problem.
its on nougat. sorry what build, i dont know.
Region China?. i dont know about the C00 or rebranded and c432 that you said. really have no idea.
OK.
So your Honor9 is STF-AL00 and was on nougat.
But:
-you don't know on which firmware region it was and you don't know if it was rebranded to STF-L09
-i guess your brother could also have updated it to oreo, or rebranded it before bricking it...
If you did not have any chinese app stock installed like QQ, Weibo or Tancent News then you could be probably on region C432 (or C10 or C185) ;
If so use this with an exfat external micro sdcard or usb-otg EXFAT formatted:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
First try with C432B130, read the instructions inside, do it, then report.
thanks.. i will try it tonight,
i've done try update with sd card before, but not with those file inside the link you give.
and also not with EXFAT fromat sd card, but it said Software Update Failed.
i will try this and update here again..
thanks
honor 9 stf-al00
phone unlocked and frp unlock
bricked the phone installing oreo.
twrp is installed but all the roms i flash i get error 9.
dload with update.app get stuck at 5% and after "system update failed"
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
At this point i just want the phone running anything but everything that i do doenst work
ruigarcia said:
honor 9 stf-al00
phone unlocked and frp unlock
bricked the phone installing oreo.
twrp is installed but all the roms i flash i get error 9.
dload with update.app get stuck at 5% and after "system update failed"
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
At this point i just want the phone running anything but everything that i do doenst work
Click to expand...
Click to collapse
Are you with nougat or oreo partitionni'g scheme ?-> are you actually booting on a nougat twrp or on a oreo twrp ?
Which region your phone were on on ?
original chinese C00 ?
or rebranded C432, C10 or else?[/QUOTE]
oslo83 said:
Are you with nougat or oreo partitionni'g scheme ?-> are you actually booting on a nougat twrp or on a oreo twrp ?
Which region your phone were on on ?
original chinese C00 ?
or rebranded C432, C10 or else?
Click to expand...
Click to collapse
[/QUOTE]
right now with oreo partitions, never rebranded the phone, and i was running update b362 so i assume im still on c00, otherwise i dont think i would have worked.
twrp is 3.1.1.1 open kirin edition
right now with oreo partitions, never rebranded the phone, and i was running update b362 so i assume im still on c00, otherwise i dont think i would have worked.
twrp is 3.1.1.1 open kirin edition[/QUOTE]
OK so, the facts :
1) B362 firmware are mostly european (C432) or russian (C10) and could be japanese (C635).
So your phone was previously rebranded from chinese to one of these region.
It's not a problem if not done wrong, maybe your case...
2)'twrp 3.1.1.1 open kirin edition' is a custom recovery for NOUGAT and not for oreo.
And then some more questions:
-Can you boot your phone to normal mode ?
-You were on nougat before brick ?
-You were one oreo B362 before brick ?
-The brick happens after it upgraded from mogat to oreo B362 ? If so, how did you update ? normal OTA ? forced OTA with android app Firmware Finder ?
i can only boot the phone in recovery mode (twrp and erecovery) and fastboot
i installed b360 through forced ota and then when i was in the system i updated again to b362 throught settings\system update
i was on oreo b362 before brick, and i remember now that my navigations buttons were not working so i flashed a custom kernel to fix it, but
that prevented me from booting to the system again. (Proto Kernel)
edit: used that tool you gave me and i managed to flash STF-L09_C432B360.
ruigarcia said:
i installed b360 through forced ota and then when i was in the system i updated again to b362 throught settings\system update
Click to expand...
Click to collapse
So your phone was correctly rebranded in the past and we can deduce you are now on region C432 or C10.
ruigarcia said:
i was on oreo b362 before brick, and i remember now that my navigations buttons were not working so i flashed a custom kernel to fix it, but
that prevented me from booting to the system again. (Proto Kernel)
Click to expand...
Click to collapse
You flashed a custom B360 kernel over your B362 : It was why your phone bootlooped just after !!
Flashing a stock B362 kernel would have solve the bootloop.
ruigarcia said:
i also extracted update.app and i can flashed boot,kernel and recovery but i get an error flashing system
Click to expand...
Click to collapse
You said you had flashed boot, kernel and recovery from an update.app.... Which build number and region this update.app was from ?
You could flash back B362 stock boot, kernel and recovery and it should boot if you did not messed something else...
So, the best for you will be to:
1) use HuRUpdater to flash C432B360 or C10B360 firmware (depending of your actual phone region)
2)then flash the B360 kernel fix
3)then update via OTA or huRUpdater.
oslo83 said:
So your phone was correctly rebranded in the past and we can deduce you are now on region C432 or C10.
You flashed a custom B360 kernel over your B362 : It was why your phone bootlooped just after !!
Flashing a stock B362 kernel would have solve the bootloop.
You said you had flashed boot, kernel and recovery from an update.app.... Which build number and region this update.app was from ?
You could flash back B362 stock boot, kernel and recovery and it should boot if you did not messed something else...
So, the best for you will be to:
1) use HuRUpdater to flash C432B360 or C10B360 firmware (depending of your actual phone region)
2)then flash the B360 kernel fix
3)then update via OTA or huRUpdater.
Click to expand...
Click to collapse
i flashed many update.app, i messed up with that, cant remember the last one.
just flashed twrp for oreo now, went to terminal and i can see "ro.hw.vendor: (hw)
does this tell me my phone region?
with this twrp for oreo i also get another error when flashing a rom zip "failed to mount "\system" (permission denied)
Stop messing with random dload folder and update.app ; From what i seen only special one called 'service repair' will work.
No. It does not.
Stop messing trying to flash random zip when on twrp ; From what i heard only special one called 'FullOTA-MF-PV' will work this way with twrp.
Be bold and try HuRUpdater witj C432B360 following my latter post.
oslo83 said:
Stop messing with random dload folder and update.app ; From what i seen only special one called 'service repair' will work.
No. It does not.
Stop messing trying to flash random zip when on twrp ; From what i heard only special one called 'FullOTA-MF-PV' will work this way with twrp.
Be bold and try HuRUpdater witj C432B360 following my latter post.
Click to expand...
Click to collapse
i used HuRUpdater and worked. thank you! cant update to b362 through settings tho
C432 is maybe the wrong region if you don't get ota update notification to b362/b364 when checking for update in settings :
1) What's your build number version on Settings/System/about ?
2) What's the country shown when you dial**#*#2846579#*#**- on the dial pad, then go to 'Network Information Query' and then to 'Vendor Country Info' ?
---------- Post added at 19:44 ---------- Previous post was at 19:42 ----------
Dial**#*#2846579#*#*
---------- Post added at 19:46 ---------- Previous post was at 19:44 ----------
sorry typos.
So dial:
Code:
*#*#2846579#*#*
im so sorry, i cant access my pc right now.
i will update soon i can get access to my pc.
oslo83 said:
C432 is maybe the wrong region if you don't get ota update notification to b362/b364 when checking for update in settings :
1) What's your build number version on Settings/System/about ?
2) What's the country shown when you dial**#*#2846579#*#**- on the dial pad, then go to 'Network Information Query' and then to 'Vendor Country Info' ?
---------- Post added at 19:44 ---------- Previous post was at 19:42 ----------
Dial**#*#2846579#*#*
---------- Post added at 19:46 ---------- Previous post was at 19:44 ----------
sorry typos.
So dial:
Code:
*#*#2846579#*#*
Click to expand...
Click to collapse
vendor:hw
country:eu
build number:stf-l09 8.0.0.360(c432)~
reflashed b360 and now i get update to b364 on settings. still no capacity buttons..
So, you're fine on C432.
Just flash the B360 kernel fix while you're still on B360 https://forum.xda-developers.com/showpost.php?p=75772700 ;
This will fix your buttons.
You can then do a normal update via settings
ok so i tried to update using vol up + vol down + power button, again it said software install failed
inside those rar file got 2 file, 1 is UPDATE.APP which is 4gb++ and another one is update_STF-L09_hw_eu.app size around 1.4gb.
try update with 4gb file, appear 5% loading and then appear software install failed, same with 1.4gb file...
the only option i got is reboot system now when the error come out..
already did wipe cache & data before i do the update..
any idea? am i doing wrong step?
I have the same problem...When the installation begins, it stops at 5%
My phone is turned off. I tried to install recovery but got nothing
any idea please
Hi all,
I'm trying to install Havoc OS on my P20 lite (2018 model - ANE-LX1 8.0.0.0.135(C432)). My current version of EMUI is 8.0. So I need to install a A version of ARM and NOT AB.
The system image is
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have TWRP 3.4.0 installed and working. PS, I have also tried this via fastboot (fastboot flash system Havoc-OS-v3.1-20200202-ARM64A-GSI.img.xz) with the same results
Before flashing the ROM and my GAPPS file (open_gapps-arm64-10.0-nano-20200808.zip). Via TWRP I wipe Dalvik/Cache/System/Data
Then I installed the ROM via TWRP install and selected .img install, there are no errors and the screen output says it is installed correctly.
Then I flashed the GAPPS mentioned above. After that I wipe Dalvik/Cache again.
And reboot....nothing happens. The phone boots back up and goes straight to TWRP again. It's like the ROM is not being initialized at all.
Any help would be appreciated.
MayhemIam said:
Hi all,
I'm trying to install Havoc OS on my P20 lite (2018 model - ANE-LX1 8.0.0.0.135(C432)). My current version of EMUI is 8.0. So I need to install a A version of ARM and NOT AB.
The system image is
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have TWRP 3.4.0 installed and working. PS, I have also tried this via fastboot (fastboot flash system Havoc-OS-v3.1-20200202-ARM64A-GSI.img.xz) with the same results
Before flashing the ROM and my GAPPS file (open_gapps-arm64-10.0-nano-20200808.zip). Via TWRP I wipe Dalvik/Cache/System/Data
Then I installed the ROM via TWRP install and selected .img install, there are no errors and the screen output says it is installed correctly.
Then I flashed the GAPPS mentioned above. After that I wipe Dalvik/Cache again.
And reboot....nothing happens. The phone boots back up and goes straight to TWRP again. It's like the ROM is not being initialized at all.
Any help would be appreciated.
Click to expand...
Click to collapse
Hi,
1. On Oreo use this TWRP
https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
2. You have to extract system.img (cca 1,2GB) from .xz package (unpack it on PC), then transfer it to SD .
Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery (se the note bellow!)
P.S.: it's recommended install TWRP over eRecovery:
Copy downloaded TWRP file to the SD card, and also copy to card Stock ramdisk_recovery , download here: (for EMUI 8 only! )
https://mega.nz/#!04dG0JBb!hEgTk6DMKVDffttHiXGqa_YR_zG5UYwTMEi41KTkZi8
Since A8 and above you can not install TWRP over eRecovery from fastboot, follow instructions:
- install TWRP from fastboot , reboot to TWRP, select install image, and flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery. Reboot system. After the boot screen appears in the recovery with the inscription "Your device is booting now ..." press and hold Volume Up
for 3 sec, device will boot to TWRP.
-Alf- said:
Hi,
1. On Oreo use this TWRP
https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
2. You have to extract system.img (cca 1,2GB) from .xz package (unpack it on PC), then transfer it to SD .
Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery (se the note bellow!)
P.S.: it's recommended install TWRP over eRecovery:
Copy downloaded TWRP file to the SD card, and also copy to card Stock ramdisk_recovery , download here: (for EMUI 8 only! )
https://mega.nz/#!04dG0JBb!hEgTk6DMKVDffttHiXGqa_YR_zG5UYwTMEi41KTkZi8
Since A8 and above you can not install TWRP over eRecovery from fastboot, follow instructions:
- install TWRP from fastboot , reboot to TWRP, select install image, and flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery. Reboot system. After the boot screen appears in the recovery with the inscription "Your device is booting now ..." press and hold Volume Up
for 3 sec, device will boot to TWRP.
Click to expand...
Click to collapse
Hi Alf my man
So I am having a bit of trouble with your instructions. I am very sure it is my own fault! I just want to clarify the steps please. I have downloaded the 2 provided files you gave in the link.
1
Install TWRP via
"fastboot flash recovery_ramdisk TWRP-oreo-smart.img"
2
Boot into newly flashed TWRP and flash the 2 files again as specified
"....flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery...."
3
Reboot after step 2 and go into TWRP again and perform the system.img install as per instructions via TWRP
"Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery"
I take it that I need to install my GAPPS package as well in this stage?
4
After factory reset from stock recovery the OS should boot and initiate...
Thanks again man for your help!
MayhemIam said:
Hi Alf my man
So I am having a bit of trouble with your instructions. I am very sure it is my own fault! I just want to clarify the steps please. I have downloaded the 2 provided files you gave in the link.
1
Install TWRP via
"fastboot flash recovery_ramdisk TWRP-oreo-smart.img"
2
Boot into newly flashed TWRP and flash the 2 files again as specified
"....flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery...."
3
Reboot after step 2 and go into TWRP again and perform the system.img install as per instructions via TWRP
"Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery"
I take it that I need to install my GAPPS package as well in this stage?
4
After factory reset from stock recovery the OS should boot and initiate...
Thanks again man for your help!
Click to expand...
Click to collapse
I have done as instructed yet there is am issue at the last step. I can boot into stock recovery but when I try and do a Factory Reset via the menu the reset only goes to 9% and gives a large orange/red exclamation mark.....so it did not finish. When I try and reboot and load the OS it goes into a boot loop and that is it.
MayhemIam said:
I have done as instructed yet there is am issue at the last step. I can boot into stock recovery but when I try and do a Factory Reset via the menu the reset only goes to 9% and gives a large orange/red exclamation mark.....so it did not finish. When I try and reboot and load the OS it goes into a boot loop and that is it.
Click to expand...
Click to collapse
Okay, reboot system. You can perform factory reset later (if needed).
---------- Post added at 19:17 ---------- Previous post was at 18:56 ----------
Please provide me the link where you downloaded Havoc OS
-Alf- said:
Okay, reboot system. You can perform factory reset later (if needed).
---------- Post added at 19:17 ---------- Previous post was at 18:56 ----------
Please provide me the link where you downloaded Havoc OS
Click to expand...
Click to collapse
No it's stuck on a bootloop Alf :crying:
MayhemIam said:
No it's stuck on a bootloop Alf :crying:
Click to expand...
Click to collapse
Don't panic! IMO it's time to clean your phone , download Service ROM
https://androidhost.ru/5NX
Unpack .zip package, find dload file and copy it to the SD card (without unpacking it!). Then turn off the phone and flash ROM using three button combo.
(instruction can be found in file ReleaseDoc).
Important: the process will erase all your data and will lock again the bootloader!
I will now try to install Havoc 3.1A and I will let you know, okay?
-Alf- said:
Don't panic! IMO it's time to clean your phone , download Service ROM
https://androidhost.ru/5NX
Unpack .zip package, find dload file and copy it to the SD card (without unpacking it!). Then turn off the phone and flash ROM using three button combo.
(instruction can be found in file ReleaseDoc).
Important: the process will erase all your data and will lock again the bootloader!
I will now try to install Havoc 3.1A and I will let you know, okay?
Click to expand...
Click to collapse
Well I can still dload back to my old EMUI 8.0 OS! I just did it again and it works. I can get back into my OS no probs. I have done this about 6 times today, lol. I really do not want to lock my bootloader again as it took me a long time to get it unlocked!
Thnx for the reply!
MayhemIam said:
Well I can still dload back to my old EMUI 8.0 OS! I just did it again and it works. I can get back into my OS no probs. I have done this about 6 times today, lol. I really do not want to lock my bootloader again as it took me a long time to get it unlocked!
Thnx for the reply!
Click to expand...
Click to collapse
Also just for me to understand. I have EMUI 8.0 running then I can't upgrade to a Android 9 Custom ROM?
MayhemIam said:
Also just for me to understand. I have EMUI 8.0 running then I can't upgrade to a Android 9 Custom ROM?
Click to expand...
Click to collapse
I'm not sure I fully understand your question, you cannot upgrade to A9 , you can flash Custom ROM based on A9 (which requires A8 OS).
Btw, I tried flash Havoc 3.1, 3.0, tried several TWRP, no luck. Flashed system.img from fastboot, nothing. It seems A-only version doesn't work on ANE. I have no idea what the problem is...
(hehe, R.I.P. English )
-Alf- said:
I'm not sure I fully understand your question, you cannot upgrade to A9 , you can flash Custom ROM based on A9 (which requires A8 OS).
Btw, I tried flash Havoc 3.1, 3.0, tried several TWRP, no luck. Flashed system.img from fastboot, nothing. It seems A-only version doesn't work on ANE. I have no idea what the problem is...
(hehe, R.I.P. English )
Click to expand...
Click to collapse
OK I can't upgrade to EMUI 9 but I can upgrade to a custom ROM which has Android 9 (through AB partition)?
"...you can flash Custom ROM based on A9 (which requires A8 OS)." Which means I can upgrade to any custom ROM which has Android 9 / 10?
What is the difference then between the following?
ARM64A
ARM64AB
-Alf- said:
Okay, reboot system. You can perform factory reset later (if needed).
---------- Post added at 19:17 ---------- Previous post was at 18:56 ----------
Please provide me the link where you downloaded Havoc OS
Click to expand...
Click to collapse
Oh snap man, I only saw the last part of your post now.
I tried the following ROMS.
Most of them was downloaded from SourceForge man.
Havoc-OS-v3.0-20191225-ARM64A-Unofficial.img.xz
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have tried others as well but they were ARM64AB....
MayhemIam said:
OK I can't upgrade to EMUI 9 but I can upgrade to a custom ROM which has Android 9 (through AB partition)?
"...you can flash Custom ROM based on A9 (which requires A8 OS)." Which means I can upgrade to any custom ROM which has Android 9 / 10?
Click to expand...
Click to collapse
For example:
Pixel Experience, ROM for the Huawei P20 Lite
Contributors
DarkJoker360
Source Code: https://github.com/DarkJoker360
ROM OS Version: 9.0 Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8 unlocked bootloader & twrp
MayhemIam said:
OK I can't upgrade to EMUI 9 but I can upgrade to a custom ROM which has Android 9 (through AB partition)?
"...you can flash Custom ROM based on A9 (which requires A8 OS)." Which means I can upgrade to any custom ROM which has Android 9 / 10?
What is the difference then between the following?
ARM64A
ARM64AB
Click to expand...
Click to collapse
What is the difference then between the following?
ARM64A
ARM64AB
OK so the answer is
Use ARM64xA - when your phone is using Android 8.0 (EMUI 8.0)
Use ARM64xAB - when your phone is using Android 9 (EMUI 9.1)
-Alf- said:
For example:
Pixel Experience, ROM for the Huawei P20 Lite
Contributors
DarkJoker360
Source Code: https://github.com/DarkJoker360
ROM OS Version: 9.0 Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8 unlocked bootloader & twrp
Click to expand...
Click to collapse
Hi Alf,
I have abandoned ship to get HavocOS on my device
But I'm trying now the following AOSP Android 10 Q
https://www.getdroidtips.com/android-10-huawei-p20-lite/
I'm going to try and use this TWRP (twrp-3.4.0-0-anne.img)
Will let you know how it goes!
MayhemIam said:
Hi Alf,
I have abandoned ship to get HavocOS on my device
But I'm trying now the following AOSP Android 10 Q
https://www.getdroidtips.com/android-10-huawei-p20-lite/
I'm going to try and use this TWRP (twrp-3.4.0-0-anne.img)
Will let you know how it goes!
Click to expand...
Click to collapse
Getdroidtips? Really reliable source
I finally installed Havoc 3.8ab (latest version), I'm disappointed . No Music player, no Sound recorder (=no call recording) , no email client, Calendar etc. etc....
I think you should upgrade to EMUI 9.1 and try AB versions , hm?
-Alf- said:
Getdroidtips? Really reliable source
I finally installed Havoc 3.8ab (latest version), I'm disappointed . No Music player, no Sound recorder (=no call recording) , no email client, Calendar etc. etc....
I think you should upgrade to EMUI 9.1 and try AB versions , hm?
Click to expand...
Click to collapse
I would have really like to test an earlier version then which did not have all those missing features! It seemed to me that customization was very good on the ROM....
facepalm on Get Droid Tips....because the only tip I got from them is more than 12 hrs of trying to implement their crappy advice!
Ok I will upgrade to EMUI 9 then Alf.
Thanks for all the advice man and flashing along side me
Try Havoc 2.9 for Oreo , the Rom is just perfect . (own experience, tested on 8.0.0.126 )
INSTALL ON CLEAN OS (if your current OS is Custom ROM, flash stock ROM).
Download and unpack on your PC Havoc 2.9 arm64a:
https://sourceforge.net/projects/ha...90914-phhgsi_arm64_a-Official.img.xz/download
Flash extracted Havoc.img from fastboot using command
fastboot flash system (file name).img
Before booting up the ROM, you will need to perform a factory reset in stock recovery!!!
Reboot system.
In the Phh-Treble Settings-Huawei features, select fast charge 4000mA and Enable blurry UI workaround
If you want to install GAPPs or Magic (Magic v20.3 works without problems) , use TWRP by "ascuccio" (own experience), download link:
https://mega.nz/#!EsdTgYqZ!2QX9wgAhA653Dp2MkDTLPHa3tmFdNqmC5CDDHB-7f5Y
Screenshots:
https://mega.nz/#!1tlnlSyS!3SdAkZwf9miFVMkEXiq5Ypy3PcTOhuuohywk1ta-eXI
MayhemIam said:
Hi all,
I'm trying to install Havoc OS on my P20 lite (2018 model - ANE-LX1 8.0.0.0.135(C432)). My current version of EMUI is 8.0. So I need to install a A version of ARM and NOT AB.
The system image is
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have TWRP 3.4.0 installed and working. PS, I have also tried this via fastboot (fastboot flash system Havoc-OS-v3.1-20200202-ARM64A-GSI.img.xz) with the same results
Before flashing the ROM and my GAPPS file (open_gapps-arm64-10.0-nano-20200808.zip). Via TWRP I wipe Dalvik/Cache/System/Data
Then I installed the ROM via TWRP install and selected .img install, there are no errors and the screen output says it is installed correctly.
Then I flashed the GAPPS mentioned above. After that I wipe Dalvik/Cache again.
And reboot....nothing happens. The phone boots back up and goes straight to TWRP again. It's like the ROM is not being initialized at all.
Any help would be appreciated.
Click to expand...
Click to collapse
You have tried to decrypt the data?
https://forum.xda-developers.com/honor-7x/development/mod-decrypt-data-emui-8-t3765403
Dego02 said:
You have tried to decrypt the data
Click to expand...
Click to collapse
No comment...