IF YOU'RE COMING FROM ANOTHER THREAD OR SITE, AND RUNNING THESE MODULES ON A DEVICE OTHER THAN A 3/3T, DON'T POST YOUR ISSUES HERE!
THESE WERE STRICTLY CONFIGURED FOR THE 3/3T ON OXYGEN OS!
Here are a few I've put together after snooping around the OnePlus threads and converting various mods into modules.
These modules WILL NOT work on Magisk builds older than 13.
I have a folder of modules for Magisk 11 and older (no longer maintained, nor supported) at the end of this post.
Requirements:
- Stock OxygenOS 4.1.6, Open Beta 12, or newer.
- Magisk 13.3 installed by following the installation guide: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
After installing, download any module and flash in TWRP.
NOTE: None of these modules are SystemUI or framework mods as doing such have potential to cause soft bricking, leading to doing a factory reset.
Magisk modules
Google Pixel Launcher with Essentials and Extras v2.0
Includes Pixel Launcher, along with the Google's Wallpaper Picker, and the Live Wallpapers APKs from the Google's Pixel factory image.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Pixel Launcher to 7.1.13862848
- Updated Nexus Launcher Icons to 7.1.2
- Updated Google Wallpaper Images to 20161104_RC01
- Updated Wallpapers to 1.1.153125266
- Updated Live Earth Wallpapers to 7.1.2
- Updated Live Data Wallpapers to 7.1.2
-----------------------------------------------------------------------------------------
Google Pixel Sound Set v2.0
Replaces the stock OnePlus UI, alarm, notification, and ringtone sounds with the set from the Pixel phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated sounds to match the Android O beta image for Google Pixel.
-----------------------------------------------------------------------------------------
Google Dialer with CallerID and Lookup v2.1
Google Dialer, along with the permissions XMLs and required framework to allow full functionality, including Caller ID and Lookup. Be sure to disable the stock OnePlus Dialer, and set Google Dialer as default.
v2.1 Changelog:
- Replace OPSystemUI with a blank template for Magisk as recent versions of OOS causes conflict with Google Dialer's Answer/Decline buttons.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Google Contacts to 2.0.10
- Updated Google Dialer to 10.1.161735957
-----------------------------------------------------------------------------------------
Google Daydream VR v2.0
Allow the use of using Daydream VR, and enables downloading of additional Daydream apps from the Play Store.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- android.hardware.vr.high_performance.xml (taken from a factory image for the Google Pixel) is now included
instead of editing another XML with the needed entries
-----------------------------------------------------------------------------------------
Chrome Home Page Button v2.0
Enables the home button in Chrome, and an option to set a default home page in Chrome's Settings.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Display SELinux Status (Enforcing/Permissive) v2.1
Expose the status of SELinux (Enforcing or Permissive) at the bottom of Settings > About Phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
EmojiOne Emoji Set v2.0
Swap the default emoji set from OnePlus with the ones from EmojiOne.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the emoji set to 3.1.1 (July 12, 2017)
-----------------------------------------------------------------------------------------
Android O Emoji Set v2.1
Swap the default emoji set from OnePlus with the ones from Android O.
v2.1 Changelog:
- Updated the emoji set with the ones from Android O Developer Preview 4.
More information about the changes here on Android Police.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
2.4GHz WiFI Channel Bonding v2.0
As OnePlus (still) haven't fixed this, the module combines two 20MHz channels on a 2.4GHz WiFi connection into one for improved Internet speed.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Allow AudioServer/MediaServer Access v2.1
Apps such as ViPER4Android needs access to AudioServer (or MediaServer in other ROMs) to work correctly, while the kernel is set to Enforcing.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the script to execute sepolicy-inject in the new location with Magisk 13.1+ (again...)
Update: Removed. No longer needed since this module was added back into the ViPER4Android packs.
Update 2: Restored.
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) v2.1
Not much to say about this module, except that this version, in my opinion, is the last version which allows selecting 3 different quality drivers. This one runs the Super High Quality driver.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) with Dolby Atmos 6.5 v2.1
Same as the ViPER4Android module above, except this one includes Dolby Atmos 6.5.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base v2.5
This module installs the needed files for use with ViPER4Android version 2.5.0.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base with Dolby Atmos 6.5 v2.5
This module installs the needed files for use with ViPER4Android 2.5.0.5, and also installs Dolby Atmos 6.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
Gaming Controller Keylayouts v2.0
Adds keylayouts for use with Xbox 360, Xbox One, Xbox One S, and Nvidia Shield controllers.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Stereo Speaker and Microphone Gain Tweak v2.0
Created by @magura320, this module allows the earphone to be used as a speaker, and mods the microphone pickup when recording video.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Extended Volume Steps v2.1
Extend the media volumes to 30 steps, and the call volume to 15 steps. Credits to the article on the front page of XDA by Mishaal Rahman.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
Magisk-ready modules
Busybox Installer 1.27.1
Created by @osm0sis, this version of Busybox has never given me any problems during my use. Highly recommended.
Simply flash in TWRP. The installer will detect Magisk, build the module, and install it.
Be sure to disable Busybox in the Magisk Manager app, followed by rebooting to make use of this.
-----------------------------------------------------------------------------------------
Folder dump of old Modules for Magisk 11 or lower
Note: Modules in this folder are no longer supported or maintained. They are here in case someone out there still wants to use them.
Very helpful thread thanks
is your snapdragon camera extremely buggy? Only a few features work for me.
Most of the mods just need root..can be SuperSU also..
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
knpk13 said:
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
Click to expand...
Click to collapse
For the center clock mod, I assume that would fall under modding SystemUI.apk or OPSystemUI.apk. I've tested a few mods from this sub-forum in the form of modules, and ended up having to factory reset my phone after disabling that module.
As for the codec, this one has the APT-X HD library included.
Thanks a lot for this awesome thread and these infos
all works like a charme
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Long post reply about GPM here: https://forum.xda-developers.com/showpost.php?p=70804660&postcount=11
Short reply, run ViPER as "Compatible" under FX Compatible Mode for use with GPM.
I've tried disabling anything that has remotely anything to do with audio, which seems to be Dirac and Dirac Control Service on this phone, to solve the issue, but no go.
Also, you don't have to run your kernel in Permissive with this module of ViPER. It's already set up to allow running in Enforcing.
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Sooo I looked here and there and foud that the FX Compatible mode fixed it. Play Music works with Viper again. Thanks OP for the great pack. That bass, though.
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
How about Google pixel navibar ?
weriwd said:
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
Click to expand...
Click to collapse
Disable or uninstall the magisk mod
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
kinfam said:
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
Click to expand...
Click to collapse
I never bothered with the download menu in Magisk, but I just took a look, and mine does the same thing the one on the Magisk repo does, which is adding the "ro.opa.eligible_device=true" to build.prop, and not spoofing a phone as a Pixel. Something a lot of older non-Magisk mods do.
Same with the EmojiOne module.
As for the Controller Keylayout module on the repo, it's also similar, except mine has the keylayout files for the Nvidia Shield Controllers included.
saberzaid said:
How about Google pixel navibar ?
Click to expand...
Click to collapse
Not doing that as that requires System UI and/or framework-res.apk modding. Similar reason why is explained in this post: https://forum.xda-developers.com/on...gisk-modules-oneplus-3t-t3548446/post70826963
Great mods
I'm using a bunch on Oneplus 3 with open beta 11, if anyone wanted to know for compatibility reasons
You know that aptx wont work.
The HAL and hardware doesnt support it.
I have install viper addon but dont see the app. How can i start viper? Stereo Mod also not work.
pahapoika91 said:
You know that aptx wont work.
The HAL and hardware doesnt support it.
Click to expand...
Click to collapse
Source(s) for this claim please.
Related
PLEASE NOTE:
Due to the sudden random demise of my Nexus 6P (and the fact that the Pixel XL is really neat), all development of this ROM has been discontinued. It's kinda hard to make a 6P ROM without a 6P, you know?
There has been interest expressed by some members of the forum in acquiring another 6P for me to continue working on this, and for me to put a donate link in the OP.
If you'd like to contribute to this effort, Paypal donations are accepted at the following address: [email protected]
I apologize for this inconvenience, but I obviously can't control when my phone will randomly decide to die, and I can't justify spending $300+ of my own cash to buy another primary device, when the last one just decided to crap out without warning. So, it just doesn't make sense to buy another as my daily driver.
Team
"LOUD NOISES!"
Presents
Digitalhigh 6P ROM
"I see everybody lost their minds for this election..."
What it is:
This is a stock-based ROM, with extensive changes and modifications to re-create the Pixel experience.
Despite the cool team name, this ROM is really just maintained by me, Digitalhigh. All updates, mods, and anything else (unless otherwise specified) was put here by yours truly. While I will not plaster this thread with links like other devs, there is a donate link under my avatar - any and all donations are appreciated, but not required.
Features:
Code:
100% Custom Aroma Installer
All apps 100% up-to-date at the time of release
Retain ROM Odex for performance
Based on latest Official Google NMF26F release
DM-Verity disabled
Data encryption optional
Pixel Launcher.
Pixel Wallpaper Applications (Picker, Live Earth, Live Data, etc.)
Pixel Wallpapers set as default picker in settings.
Pixel Colors system-wide in framework-res, settings, systemUI, documentsUI.
Pixel animation in navbar.
Google Assistant.
Pixel System sounds.
Pixel Boot animation.
UNLIMITED GOOGLE PHOTOS STORAGE.
SystemUI has rounded icons for everything.
CameraNX with ZSL feature.
Night Light feature enabled.
Navbar tuner enabled.
All booleans, arrays, from SystemUI/Framework-res/Settings in Pixel resources copied over.
In short - if it can be taken from the Pixel devices, it will be here.
Optional Features:
Magisk Manager
Magisk-Root (Android pay should work)
Amaze File Manager
Adfree Android Adblocker
Substratum Layers Manager
Black Boot Animation (DH Custom, includes boot sounds)
Tinted Navbar
Select from the following kernels:
Stock
Elite
Gerard
Kernavatore
WinX
DEBLOAT (Remove the following "stock" apps):
- Drive
- Gmail
- GoogleCamera
- Hindi IME
- Pinyin IME
- Korean IME
- Google Photos
- Hangouts
- Messenger
- Maps
- Play Music
- Play Games
- Videos
- Youtube
- Wallet
More to come!!!
Rambling:
While I haven't released anything publicly in a while, I have actually been working on this project privately since the first release of 7.1.1 several months ago. Now that there is an official, stable build, I figured it was time to stick the finger to Google and turn on all the features we should have by default.
Download
Experimental/Older/AFH: https://www.androidfilehost.com/?a=show&w=files&flid=43144
Current/Latest: https://www.androidfilehost.com/?fid=385035244224404630
MD5: ced44b307495a1d52c6f5771197fc7f9
Instructions:
1a. Install latest stock Google vendor/radio/bootloader images
1. Download
2. Put on device
3. Flash ROM
3a. Select awesome options in installer
4. ???
5. PROFIT.
Bugs/Glitches/Annoyances:
Credits:
@topjohnwu - Magisk
@buckmarble - Elite Kernel
@vt0r - Kernavatore Kernel
@winxuser - WinX Kernel
@gerard_f - Gerard Kernel
@Charles_l - CameraNX
@Playerz - Original black boot animation used for the one I customized
Please let me know if I forgot to mention you!!
GPL:
ElementalX Source
Stock Source (found on AOSP)
Photos, graphics, and more coming!!
XDA:DevDB Information
Digitalhigh6P, ROM for the Huawei Nexus 6P
Contributors
digitalhigh
ROM OS Version: 7.0.x Marshmallow
Version Information
Status: Testing
Created 2015-11-17
Last Updated 2016-08-25
Changelog:
Code:
12.10.16
Aroma Installer
Debloat readded
Add option for tinted nav bar
Stock Navbar reverted to "true Pixel" style
Add option for black boot animation
Add option for Latest Magisk + PHH Superuser
Add option for Substratum, Amaze File manager, Adfree Android
Add four optional kernels: Elite, Gerard, WinX, kernvatore
Increased media_codec settings for optimized video recording, playback.
Updated to latest CameraNX, fixed black screen issues.
Enable Pixel "unlimited storage" in Photos.
Black launcher icon for Downloads/Documents UI.
Other minor UI tweaks from Pixel.
12.08.16
Complete re-release. 7.1.1 base, as many Pixel features as I could shoehorn in.
08.25.16
Jesus, have I really not released a ROM for six months? How did that even happen?
One step forward, two steps back. Rebase on Android N. Near-total reworking of installer and options.
No more Xposed, no more Xposed modules.
No more CM/HTC apps till I get updated versions.
Back down to stock and ElementalX kernels for now, will be adding more.
Hey, there's a new aroma installer. That's pretty.
Added Nexus Launcher.
Added Magisk Manager with Superuser and Viper4A modules. You can have root and android Pay at the same time.
Added Amaze file manager.
02.05.16
We're up to EIGHT different kernels. (Not all tested, I literally flashed their installers over stock and pulled the resulting image)
AK
ElementalX
FechdaKernel
Franco
GodsKernel
Kylo
LeanKernel
Stock
Updated Viper4Android to latest version.
Updated Xposed to V80.
Latest systemless superSU. Also, YES, Android pay STILL WORKS. (Won't work with xposed).
Updated all system apps to latest versions.
Fixed some bugs with Sensify module, including Facebook Widget FC's.
Added NewsRepublic Sense Home widget.
11.22.15
Update framework-res to hopefully help with some carrier drops
Add missing framework-res for "stock" image.
Fix issues with certain mods causing symlink errors
Move CM13 audioFX and Viper to Audio section, resolve conflicts.
Add other "optional" Gapps:
- Books
- Docs
- Keep
- News & Weather
- Plus
- Sheets
- Slides
Update Kylo Kernel to latest version
Update LeanKernel to latest version
Updated Sensify apk, fixes mssing colored elements, adds Calculator themeing.
Updated system apps:
- Calendar
- Drive
- Hangouts
- Music
- Photos
- Play Store
Add initial support for dirty flashing (delete updated apps)
Add cleanup for /vendor partition for sound mods
Add stock /vendor files that may be modified by sound mods
Modified "default" installer settings for my own personal preferences
Remove reboot option in Aroma, causing issues
11.18.15
Fix issues in Aroma with bootloader not being extracted in certain cases.
Added LeanKernel as optional.
Add proper permissive ADBD.
Fixed Xposed version 78 not showing properly.
11.17.15
Initial release. Too much awesome to log.
Thanks for sharing.
This one too
Nice
Do we need to flash Gapps or it's included in the rom?
Will this ROM have any mods for the enterprise wifi issue that a lot of people including myself is running into where the businesses' wifi cant connect to the new android DHCP client?
Rom looks to have a lot of goodies tho....will give it a try tonight.
As for requests.....what about transparent status and nav bar, pie control, call record?
Also, if you guys are downloading already - give me like ten minutes. I found an issue with the Settings app that I've got fixed, upload pending. It'll be live by 4:30 CST.
bsg411 said:
Will this ROM have any mods for the enterprise wifi issue that a lot of people including myself is running into where the businesses' wifi cant connect to the new android DHCP client?
Click to expand...
Click to collapse
I was not aware of that issue, but I'd be happy to research and implement a fix. Is there any documentation related to this I can look at?
Kookitza said:
Do we need to flash Gapps or it's included in the rom?
Click to expand...
Click to collapse
It is "stock-based", so all the Gapps in the Stock ROM are here. You have the option of which ones to install and remove in Aroma.
Added to Nexus 6P index thread:
[INDEX] Huawei Nexus 6P
I'm ready to give this thang a test run ?
Sent from my Nexus 6P using Tapatalk
digitalhigh said:
I was not aware of that issue, but I'd be happy to research and implement a fix. Is there any documentation related to this I can look at?
Click to expand...
Click to collapse
I found some info here:
https://code.google.com/p/android/issues/update.do?id=188867#makechanges
bsg411 said:
I found some info here:
https://code.google.com/p/android/issues/update.do?id=188867#makechanges
Click to expand...
Click to collapse
404 not found?
Well poo. Looks like I need to flash something else. Ran your GPE ROM on my M8. Excited to see you hop to the N6P.
digitalhigh said:
404 not found?
Click to expand...
Click to collapse
Hit the first link that shows up....it wont let me link the thread:
https://www.google.com/search?q=pea...57j69i60l3&sourceid=chrome&es_sm=122&ie=UTF-8
What's up dude! Good to see you made it, bringing some of the m8 with ya
OP Updated with links to the "fixed" version.
DH!! A very welcome site!! One of my absolute favorite M8 GPe developers, very glad to see you over here.
bsg411 said:
Will this ROM have any mods for the enterprise wifi issue that a lot of people including myself is running into where the businesses' wifi cant connect to the new android DHCP client?
Rom looks to have a lot of goodies tho....will give it a try tonight.
As for requests.....what about transparent status and nav bar, pie control, call record?
Click to expand...
Click to collapse
There's an option in Dev options to use legacy lollipop DHCP isn't there?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You flash this rom at your own risk,
i take no responsibility for any mishaps.
Subscribe to update notifications and general chat by clicking the button below
WETA 6P TELEGRAM CHANNEL
This here is my personal setup and thought i'd share. Usually i test extensively before releasing to public, but if you do find something detrimental to the usage of your device that is either Force Closing or simply not working, let me know and i will in turn inform whether that is something i will tend to.
WETA is made for Music geeks like me, its main focus is stability and Audio. It is Based off latest firmware currently, and will always be using the most up to date firmware base.
Audio mods...
A.R.I.S.E Numbers and Deuteronomy with Dolby Atmos
(Credit to @guitardedhero + @Ben Feutrill - A.R.I.S.E Audio mod - XDA thread here )
ViPER4Android 2.3.4.0 with Super quality audio driver or the new 2.5.0.5 with driver pre-installed (credit to @viper520 + @zhuhang)
- for more info on V4A, visit the WEBSITE or XDA thread
Sony Xperiaâ„¢ Z5 Premium audio system
Beatsâ„¢ libraries and effects
Dolby Atmosâ„¢
All mods are System Wide
Rom also includes...
Rooted, Busybox
deodex/Odex hybrid
3Minit Battery Mod Option - (credit to @gharrington)
- for more info on 3Minit Battery, visit the WEBSITE or XDA thread
3Minit Clock Mod Option - (credit to @gharrington)
- for more info on 3Minit Clock, visit the XDA thread
Potato Clock Mod Option - (credit to @mariozawa)
- for more info on Potato Clock, visit the XDA thread
Navbar swap back and menu buttons
Zipaligned where appropriate
All display rotations
Navbar size options
System ui dpi options
Dynamic Navbar
Headphone volume warning disabled
Layers and ready
Rom does not include...
This rom is debloated, meaning i have removed...
Google apps, there are google apps that are avaliable on the play store that have been removed.
How to install...
The usual thing here, I use TWRP so can only recommend that recovery, but i am sure you will be fine with others.
If coming from another Version Base, vendor.img may need to be flashed.. Do this BEFORE flashing the rom!
Make sure WETA zip file is in your internal SD card, and head to recovery and flash the rom zip file. Reboot.
ENCRYPTED DEVICES - If you have your data partition encrypted, and you have set a "Device pin" you are going to have issues with system UI unless you disable device pin in security settings before flashing rom.
Changelog...
V1.0.1
Fixed Center Clock FC
Added 480dpi option
V1.0
First build, MHC19I base
Deodexed
Zipaligned
Debloated (apps available on Play Store)
WETA selected audio drivers and mods (HTC, Sony)
V4a with pre installed super quality driver
Added 400+ IRS convolvers (v4a)
Dolby Atmos pre installed
Center clock option
3minit battery option
V1.1
This release may need a fresh flashing of vendor.img prior to flashing rom zip.
Bootloader and Radio will be supplied also.
Updated to MHC19Q - April Security Patches
Added AK Kernel Option
Added Sony Clear Audio
Added Sony Xloud
Added OTA function
Build.prop tweaks
- Tethering activated
- Miracast activated
- Speed tweaks
V1.2
Fixed V4A convolver location
Added Potato Clock mod, (replaces center clock)
Added OTA functionality and app
Updated AK Kernel to V.063
V1.3
Fixed Potato clock for all orientations
Added Boost call audio option
Added Emoji options
Added Ad Blocker option
Added Systemwide V4A+Dolby option
- Be aware, this option may change normal volumes.
You use this mod at your own risk, damage to speakers,
may occur if used incorrectly.!
I advise that you flash vendor.img again before flashing the rom. Also if you get systemui crashes, remember that if you have been using layers themes then you may have to wipe data. In most cases wiping dalvik and cache will be fine.
V1.4.1
Disabled wake on unplug
Allow all rotations
Enabled wifi display
Disabled safe volume warning
Enabled Double tap to wake (all kernels) settings/display
Navbar resize to 36dpi option
Removed custom kernel options for stability. Flashes stock kernel automatically,
V1.5
Option to Disable Force encryption.
- Full sdcard wipe needed to complete this, so beware.
Added Dynamic Navbar to Aroma
- This mod colours the nav bar to the status bar colour.
*some apps like facebook, haven't updated to allow
for this yet.
Added WETA Reboot app
- built from source, Github Source Code
V2.0
Updated to MHC19T - May Security Patches
Updated busybox ro 1.24.2
SELinux mode option (permissive by default)
Added AOSP Browser, cLock, Eleven Music Player
Kept Google Music
V2.1
Great Audio Update...
- A.R.I.S.E audio mod now takes over from
my audio mods (WETA) due to its superior sound.
I have no problem bowing down to something so good.
-- A.R.I.S.E V1.2 with lenovo Atmos installed by default
Thanks and credits goes to @guitardedhero + @Ben Feutrill
A.R.I.S.E Audio mod - XDA thread here
Updated SuperSU tp 2.72
Kernel mods (init.d, insecure, no DM-verity, no forced encryption)
Updated Adblock hosts file
Updated Emoji to latest unicode 9
Updated ios, twitter emoji
Pre Installed Android N Keyboard
Added/updated on-boot system performance tweaks
- auto zipalign, mediaserver killer for battery, log cleaner
Network tweaks, fstrim, sqlite, ram management
V3.0
Updated Base to MTC19V - June security patches
Updated SuperSU to V2.74-2
Sound Mods from V2.1 continue in this version
Fixed lags experienced in V2.1
V3.0.1
Fixed Streaming video issues
Fixed Streaming music issues
Fixed audio not being system wide
Updated Google Camera
Updated WebView
Removed Battery percentage from Notification pull down
Removed Battery percentage from lockscreen when charging
V3.1
WETA is now a Deodex/Odexed hybrid for stability
Reverted SuperSU to V2.68 for stability reasons
A.R.I.S.E Updgraded to Exodus RC1 (amazeballs)
Fixed Stock SystemUI.apk
- Stock SystemUI will work with encrypted devices with device startup pin active
If you want status bar mods, you need to flash stock SystemUI first, boot, disable the Device Startup Pin, and then you can flash WETA again but this time selecting your mods.
Added default music player options to Aroma
- Sony Walkman
- Eleven
- Google Music
V3.2
Updated A.R.I.S.E to Exodus RC3
build.prop audio tweaks
New Emoji options
Fixed su.d scripts
V3.3
Updated to A.R.I.S.E Exodus RC6
Updated EmojiOne to V2.2
Added Super and High quality driver options for V4A
V3.4
Updated A.R.I.S.E to Exodus RC8.1
Added WETA A.R.I.S.E tweaks for 6p
Added NavSwap, swaps Back and Recents buttons
V3.7
Updated 3Minit Battery app and smali
Replaced Potato Clock with 3Minit Clock
- Potato clack can be re added if there is a demand for it
V4.0
Updated ROM base to MTC19X
- July Security patches
V4.1
Fixed ADB issues
Updated SuperSU to 2.76
Potato Clock restored as an option in Aroma
V4.2
*flash vendor.img before this update!
Updated A.R.I.S.E to Leviticus V1.1
- includes major debloating of sound system
- includes V7.0 Dolby Atmos
V5.0
Updated ROM base to MTC20F
Updated A.R.I.S.E to Leviticus V1.3
Disabled lockscreen rotation
Enabled all VoLTE instances in framework
- this may or may not activate VoLTE
7.0 fixed (Nougat)
***kernel install fixed
***Vendor now gets installed automatically
Updated to NRD90M Nougat
Updated A.R.I.S.E to Numbers V1.8
Added Nexus Launcher
All mods in WETA Extras zip
7.0.1
Fixed systemwide audio processing
Activated NavBar mods in Systemui tuner
Fixed sim issues for some folks
*updated extras zip with mods above
7.1
Updated A.R.I.S.E to Numbers V2.1
Changed a few things in framework for better connectivity
updated sony walkman
7.2
Removed Vendor.img from install
- I will include the vendor only for new rom bases from now on
Updated SuperSU to 2.78
Updated A.R.I.S.E to Numbers 3.0
Updated V4A to 2.5.0.5
Added Encore Music Player option
Added Sony Walkman install option
Added optional Dolby Atmos install
7.3
Added back Vendor.img Flashing with rom
Updated A.R.I.S.E to Numbers V3.2 (fixes)
Added V4A cross channel irs convolvers (JoeBloggs)
Added Seperate Esira Music Player install option
*Esira is a basic music player developed by the A.R.I.S.E team.
*driver io and viper app issues should be fixed
*Dolby Atmos should be fixed
7.4
Updated A.R.I.S.E to Numbers V3.4
Added system DPI option (again)
Removed Vendor img install (again)
Added WETA stock V4A installation
- this should fix v4a not showing
in app drawer, and io errors
7.5
Re-configured how rom is built
Added V4A app version options
Tweaked systemwide audio (soundcloud fix)
Tweaked and re-added in-call volume boost
*Install should be trouble free now
*Supersu has a known bug where sometimes, the app wont show in drawer, simply install supersu app from playstore. Binaries will be already installed.
8.0
Updated to NRD90U base
Updated A.R.I.S.E to Numbers V3.5
8.1
**Wipe data,dalvik and cache. Also flash vendor.img before flashing.
Added Magisk/Phh root option
Added WETA Audio option (no arise)
***V4a, Dolby and weta reboot will only work with magisk if you set magisk to permissive.
8.2
PLEASE READ (applies to magisk users only)- because the permissive setting is stored within the magisk.img.. if you backup data then wipe and restore data after the rom flash then you wont get permissive by default.
These are your options... 1, go into root explorer and delete /data/magisk.img before you go to twrp to backup
or 2, dont restore a backup
or 3, if you have already downloaded and installed V8.2 and a backup, you can dirty flash 8.2 over the top to fix problem
or 4, i dont usually recommend this, but dirty flashing should be fine this time around
Changes
Set SeLinux to Permissive by default for Magisk install
- V4A and Dolby only work in Permissive mode with magisk.
Removed DPI options, see Dev Settings screen size adjust
Fixed WETA Audio V4A install
Added Tethering hack
8.3
Added some goodies to WETA Audio
- Sony, HTC Beats, and ALSA drivers and libs. (sounds great)
Hopefully fixed Magisk/PHH apk install
8.3.1
Fixed low call audio with WETA Audio
Extras 8v2
3Minit Clock now hidden in lockscreen for all orientations
8.4
Added OTA Updater
8.5
Added A.R.I.S.E Deuteronomy to aroma
9.0
Updated to NBD90X base
Added vendor.img to this update
9.1
Updated SuperSU to 2.78 SR1
Added Suhide 1.54
Removed Magisk
Removed Vendor until next big update
Extras 9v1
Added a bunch of fonts
9.2
Updated ARISE Deuteronomy to V1.86
9.3
Updated ARISE Deuteronomy to V2.0
Updated Suhide to 0.55
Removed ARISE Numbers
Added Google Assistant
9.4
Updated Busybox to 1.25.1
Updated ARISE to deuteronomy V2.1
Extras 9v2
Updated IOS emoji to IOS 10
WETA 10
Updated Base to NBD91K
Updated ARISE to Deut 2.3.3
Removed root for this build. (issues)
– This means you need to manually root with CF-Autoroot which can be found - HERE
- Rooting should be done after flashing the rom, reboot back into fastboot to flash root.
- And the instructions are on this page - HERE
WETA 10.0.1
I decided to add SuperSU 2.78 SR3 to auto install with rom as some people are getting good results, and it tested out good for me after a clean install.
- If you have any issues with root use CF-Autoroot
WETA 10.0.2
Updated SuperSU to 2.78 SR4
- Booting looks hopeful
Extras 10v1
updated for WETA 10
WETA 11
Updated to NMF26F
Extras 11v1
Updated compatibility to NMF26F
Removed 3Minit clock (issues)
Added Center Clock
WETA 12
Updated to N4F26J
Do not flash Gapps with this ROM!
Because this is based off of stock android, gapps are included.
ROM Download Page
Wiping data, cache and dalvik is recommended.
Wipe Data if you are coming from another rom or version base, have crashes or other issues before reporting.
Flashing of vendor.img should be done BEFORE flashing the rom if you want all functionality!
TWRP 3.0.2-2 is needed for Nougat roms onward.
TWRP 3.0.2-2 - Download
Kernel source - https://android.googlesource.com/device/huawei/angler-kernel
WETA Reboot source - https://github.com/daxgirl/6thGear-Reboot-App
CM version sources - https://github.com/CyanogenMod
If you like my work, please consider buying this poor guy a craft beer for his efforts
This rom is built from a stock google rom image and doesn't require source links.
------------------------------------------------------------>
Credits...
@Chainfire
@viper520 , @zhuhang for Viper4android
@gladiac for Forced Encryption disabler, xda thread - http://forum.xda-developers.com/and...-fed-patcher-v8-forceencrypt-disable-t3234422
@guitardedhero for general audio mod inspiration, up to date system files.
@guitardedhero + @Ben Feutrill - A.R.I.S.E Audio mod - XDA thread here @tupac4u for general help with Nougat
XDA:DevDB Information
WETA, ROM for the Huawei Nexus 6P
Contributors
Mentalmuso, mentalmuso
ROM OS Version: 6.0.x Marshmallow
Created 2016-04-02
Flashing Instructions Nougat based rom
1. Wipe Data, dalvik and cache
2. Flash Vendor
3. Flash radio and bootloader if needed.
4. Flash Rom
5. First boot approx 2min
--->
Common Questions
How do i hide stock battery?
How do i mod NavBar?
- Both of these can be found in system ui tuner. You activate this by swiping down the notification pull down and pressing and holding the settings cog until it vibrates.
This turns on a new menu in Settings called systemui tuner, its all in there. If the cog doesnt vibrate. You may need to change your animation scales back to 1x within dev settings.
SystemUI keeps crashing
- Most likely this is a theme issue, especially after a dirty flash. Uninstall all themes and the apps. Flash vendor.img, wipe dalvik and cache, and rom again.
If its happening at boot time right when your device is asking for a password, then you need to flash stock rom and disable device boot security pin. Its a problem with encrypted devices and modified SystemUI.apks
Why is my battery life crap?
- Start by looking at your custom kernel, or by looking at user apps you use. Also simply constantly watching your battery is a battery drainer. The rom is seldom at fault with battery drain problems, and if it is to blame, then it is most probably and upstream google issue and not WETA.
Where is AdAway?
- If you flashed adblocker, then that is what you flashed, not AdAway. These are different things. Adblocker is a simple replacement of your stock hosts file that in turn blocks ads.
How do i get Stock clock back? How do i remove adblocker? How do i get stock NavBar height back? How do i Get A.R.I.S.E back?
- This is so simple and if you ask any of these types of questions... then i slappa yo face..
Just dirty flash the rom again. Select what you want
What is WETA Audio?
WETA Audio is an alternative to flashing with A.R.I.S.E. It replaces A.R.I.S.E with my own setup consisting of V4A (2.5.0.5 or 2.3.4.0, optional Dolby Atmos and drivers and effects from Sony, HTC and ALSA drivers. Its a more simplistic approach to what A.R.I.S.E offers which some people were requesting. Its my go to setup now also.
mentalmuso, can you add advanced reboot menu to power button? can you add volume skip track functionality?
- Short answer, No. This rom is built from stock prebuilt google images and is the reason why its mostly so stable. mods like this require building the rom from source code, which is something im not prepare to dive into at this stage. It takes too much time out of my life and requires a bigger SSD hard drive than i have at this time. Maybe ill have interest in this in the future, if i lose my job or something.
mentalmuso can you add CM visualizer to navbar?
- This mod requires the system to have signature check verification to be disabled. Although its a cool mod, thats one security risk i wont implement.
Why is there no SuperSU app, or Why is there no PHH superuser app?
- The root apps get installed to the /data partition at installation. This means sometimes there is a conflict as you may have left over data from a previous installation. This can be remedied by simply finding the app you need on the play store and installing it. No big deal. The Root binaries would have been installed properly.
Will CMTE be coming to this rom? What about OMS support
CMTE and OMS require a rom to be built from source so commits can be added. I'm not going to build from source.
Where are the extra fonts??!!
stock Android has no way of changing the system font. And WETA can't change that. It pre installs fonts for third party apps to use. Such as 3minit clock
--->
Reserved
Nice. Why general section though?
Sent from my Nexus 6P using Tapatalk
Nasty_z said:
Nice. Why general section though?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
You know what, i dunno. This always happens to me haha. I'll get it moved.
--->
Mod can you please move this to Android development section please? @MikeChannon
Sounds sweet! Will take it for a rocking spin
Mentalmuso said:
Mod can you please move this to Android development section please? @MikeChannon
Click to expand...
Click to collapse
He isn't a moderator, he's the forum admin. If you need threads to be moved please just use the report button on the first post in future. I've done this for you already.
Heisenberg said:
He isn't a moderator, he's the forum admin. If you need threads to be moved please just use the report button on the first post in future. I've done this for you already.
Click to expand...
Click to collapse
Thanks!
Sent from my SM-G920F using Tapatalk
Mentalmuso said:
Mod can you please move this to Android development section please? @MikeChannon
Click to expand...
Click to collapse
Yes, please just hit report in the future, instead of the mention system, especially mentioning Admin. :silly:
Please address your kernel source before this is moved. See this thread for more, http://forum.xda-developers.com/showthread.php?t=2645321
Let me know when this is handled and I will move this. :good:
Cheers,
Darth
Forum Moderator
Added to Nexus 6P index thread:
[INDEX] Huawei Nexus 6P
Darth said:
Yes, please just hit report in the future, instead of the mention system, especially mentioning Admin. :silly:
Please address your kernel source before this is moved. See this thread for more, http://forum.xda-developers.com/showthread.php?t=2645321
Let me know when this is handled and I will move this. :good:
Cheers,
Darth
Forum Moderator
Click to expand...
Click to collapse
I have updated the op with kernel source. Located under the downloads section. Thanks
I like the ROM that include Viper4Android.
Just installed and running fine so far...working on a full charge and battery life test next
Sent from my Nexus 6P using XDA-Developers mobile app
BakedTator said:
Just installed and running fine so far...working on a full charge and battery life test next
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
Battery life should be about the same as stock build. I like the fact that Viper4Android comes pre-installed with all the convolvers
Sent from my Nexus 6P using Tapatalk
Battery life is exactly the same as stock... Loving this so far... Thank you
Sent from my Nexus 6P using XDA-Developers mobile app
Think I'll give this a try later today. Thanks so much.
Just flashed this rom but getting FC when opening dolby app. Also, in viper, after going through the set up and rebooting, the settings aren't sticking. I mean I'm having to run the set up again and again. Did a fresh install and flashed the latest vendor image after the rom as well.
That's kind of weird, I had no problems what so ever...I tried installing it with center clock and got system ui force closes, but reinstalled with stock settings and everything is fine...can you pull a log for the dev?
Sent from my Nexus 6P using XDA-Developers mobile app
spuri78 said:
Just flashed this rom but getting FC when opening dolby app. Also, in viper, after going through the set up and rebooting, the settings aren't sticking. I mean I'm having to run the set up again and again. Did a fresh install and flashed the latest vendor image after the rom as well.
Click to expand...
Click to collapse
Ok, now that you have flashed the Vendor image, you shouldn't need to flash it again as the rom won't format the vendor partition. So im assuming by fresh install you have wiped all data and caches? Are you using the stock kernel that gets flashed with the rom? Flashing the Vendor.img after the rom may actually cause a problem with v4a and dolby just thinking about it.
EDIT: also what rom were you previously on?
--->
Where a good place to start for our new ROM?
I see the sticky post, but it's from Ubuntu 13.10 so very old.
Some things about what we wish to accomplish:
-Based on latest AOSP pie
- magisk integration (or other root solution). One possible solution is a userdebug build.
- Substratum integration (or similar theming engine)
- better storage and RAM optimizer
- modify startup script
- Some version of google apps (probably opengapps)
- customize everything to user desire
- battery optimizations
- possible TWRP installer inbuilt
- inbuilt OTA updater
- youtube vanced instead of standard YouTube
- inbuilt hosts files editor/importer
- inbuilt adblock separate from hosts management (?)
- custom subs theme for lunaOS
- lawnchair as default launcher
- optimize boot up sequence
- audio enhancer (not in first release)
- f Droid or play store alternative
- Aroma installer
- light/dark/black material rounded theme
- call recording
- properly support aptX and aptX HD
- Easter eggs galore
Obviously, we're not looking to integrate all that on first release, and don't need integration instructions for all (but those are welcome).
We all have basic to advanced Android knowledge, and I personally have worked with things like TWRP development, magisk modules development, etc
GravityBox - all-in-one tweak box - Xposed module for devices running Android 10
Version 10.1.2 [Q]
Version for JellyBean is available in this thread: https://forum.xda-developers.com/showthread.php?t=2316070
Version for KitKat is available in this thread: https://forum.xda-developers.com/showthread.php?t=2554049
Version for Lollipop is available in this thread: https://forum.xda-developers.com/showthread.php?t=3037566
Version for Marshmallow is available in this thread: https://forum.xda-developers.com/showthread.php?t=3251148
Version for Nougat is available in this thread: https://forum.xda-developers.com/showthread.php?t=3653953
Version for Oreo is available in this thread: https://forum.xda-developers.com/showthread.php?t=3739929
Version for Pie is available in this thread: http://forum.xda-developers.com/showthread.php?t=3908768
READ THIS POST CAREFULLY BEFORE PROCEEDING ANY FURTHER
Introduction
The app utilizes Riru and EdXposed Magisk module which uses original Xposed Framework API created by rovo89.
!!!!!! WARNING !!!!!!
This module utilizes EdXposed Framework which is still in early development stage and may contain bugs or might not be fully compatible with system of your Android device. I take no responsibility for any issues arising from using GravityBox with EdXposed and strongly recommend creating a full backup of your device before activating the module.
Requirements
- Magisk v19 or later
- Riru v19.5 or later (Magisk module)
- Official EdXposed release (Magisk module)
(CHOOSE WHATEVER VERSION WORKS BEST ON YOUR SETUP - EXPERIENCE SHOWS THAT DIFFERENT VERSIONS WORK DIFFERENTLY ON DIFFERENT DEVICES/SYSTEMS)
- EdXposed Manager (Application)
- Avoid using Resource hooking support if possible (Can be disabled in EdXposed Manager settings)
Installation
This procedure assumes you have working Magisk installation.
1) Install Riru and EdXposed modules using Magisk Manager
2) Install EdXposed Manager app
3) Reboot and open EdXposed Manager app to check if EdXposed works and is active
4) Install GravityBox and enable it in EdXposed Manager
5) Reboot
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
they are enabled in module settings. This is EdXposed limitation/glitch
Feature highlight
--- Lockscreen tweaks
--- QuickSettings tile management with additional tiles
--- Statusbar tweaks
--- Navigation bar tweaks
--- Pie controls
--- Power tweaks
--- Display tweaks
--- Phone tweaks
--- Media tweaks
--- Hardware/navigation key actions
--- GravityBox Actions - interface for 3rd party apps
--- Notification control (per-app notification LED/sounds/vibrations)
--- Fingerprint launcher
--- Advanced tuning of Framework and System UI parameters
... and many more
Compatibility
GB's main concept is to make most of the preference changes to be done on the fly without need to reboot a device to achieve custom-ROM like experience.
This means it is not possible to "completely deactivate" particular feature if it causes trouble on your device or if you installed GB because you want to use only one particular feature you can't find elsewhere.
This results in issues on ROMs/devices that have parts that are diverting from default Android implementation too much, or are running heavily modified custom ROMs.
If you experience weird issues after installing GB, even if you didn't activate a particular feature, it is not because of GB is broken, it is because it is not compatible with your ROM.
It is very similar to a situation when you installed ROM built from source for Nexus to some Xperia device - it won't work.
GB is a complex module and is not suitable for 1 purpose scenario. This means, if you are running custom ROM built from source, and you are missing a certain feature, your best option is to go ask creators of those ROMs to implement those additional features. Supplementing missing features on well-known custom ROMs built from source by installing xposed modules (especially complex ones) is definitely not a good way to go and can cause more trouble than good.
GB being a complex module, it shouldn't be combined with other complex modules often racing for the same goal. They can conflict/fight on the same playground and there's no way you can deterministically say which one's going to win. They can even lose both.
So in summary:
- this module is designed to run on vanilla or close-to-vanilla Android 10 (AOSP)
- officially supports devices/systems it was developed and tested on
- Samsung Touchwiz, HTC Sense, MIUI, LeWa, Xperia, Lenovo, etc. are NOT supported. It is not guaranteed this module will work on these at all so try at your own risk. This module is simply too complex to support all kind of ROM brands that were vastly modified by vendors.
- DO NOT USE WITH CUSTOM ROMS MODULE WAS NOT EXPLICITLY DESIGNED FOR
- I will not implement any exceptions that will adapt this module to a specific custom ROM. Please, do understand, it is unmanageable.
- I will not provide any support for devices violating these compatibility rules
GravityBox [Q] has been designed for and tested on
- OnePlus 7 Pro running OxygenOS 10
- Nexus 5X running Pixel Experience 10
- Pixel 3a running Google OS
Reporting bugs
If possible, please use Github issue reporting interface for reporting bugs.
If you experience problems with certain feature, provide the full-detailed info that can help me
to reproduce the bug and attach error.log file you'll find in:
/data/user_de/0/com.solohsu.android.edxp.manager/log
If you use different manager or there is no log file present, use ADB to capture log: adb logcat -s EdXposed-Bridge
In case you experience SystemUI crashes or other apps Force Closing, or device soft reboots, attach logcat from time
crash occurs. (use adb logcat *:E or your favorite logcat app from Play Store).
Please, don't attach big logs. Only the portion where error is clearly seen.
Disable all other xposed modules before reproducing bug to make sure it is really GravityBox related
Remember, this app was developed and tested on one particular device so it is not guaranteed that it will work flawlessly on yours.
Click here to read additional, more detailed info on Reporting bugs provided by @trjlive
Multilanguage support
Volunteers are welcome to translate GravityBox to other languages.
Simply download this file: https://github.com/GravityBox/GravityBox/raw/q/GravityBox/src/main/res/values/strings.xml
Use Notepad++ to edit strings and then send me edited file so I can include translations into next release.
Source code
GravityBox is opensource. Sources are available in my gihub: https://github.com/GravityBox/GravityBox/tree/q
If you're a dev and have some ideas for additional features, feel free to fork it, work on it and send the pull requests.
Copyright notice
https://github.com/GravityBox/GravityBox/blob/q/NOTICE
Support development
Coding, maintaining and supporting this project costs me a lot of my precious time. If you find this project useful, you are more than welcome to support its development via donation. This form of support is meant to compensate for my time dedicated to the community + eventually, help me to afford newer device to keep up with AOSP evolution thus providing continuous support as Android evolves. Thanks!
Info about premium features and PayPal transaction ID verification system
1) Those who supported development via PayPal donation can use their PayPal transaction ID to unlock premium features.
As of v2.9.5, there are two premium features:
- Backup/restore of GB settings.
- Ultimate notification control
2) If you contributed to the project by providing translations, code fragments, or by any other way
you can apply for a free transaction ID by contacting me via PM.
3) Be aware that there's a system that can identify potential transaction ID
abuse. E.g. when one ID is being used by more users. Such IDs will get blocked automatically.
This can also happen when you previously exposed your ID in public forum and other users took
advantage of it. If this is the case, contact me via PM so I can issue new, special ID.
In case you own more devices, you can use one transaction ID on up to 10 of them.
4) If you are using your own custom builds of GB for personal use, you will get hash mismatch
upon verifying your ID as verification system accepts requests only from official releases of GB.
If you want to be able to verify IDs with your custom build, contact me via PM so I can setup
a special hash for your build.
If you are using a custom build that you provide for broader group of users (e.g. in a custom ROM),
it is necessary to ask for new hash everytime your new custom version is released for public use.
These rules are based on mutual trust so please, do not violate them.
Credits
- RikkaW for creating and maintainng Riru Magisk module
- solohsu & MlgmXyysd for creating and maintaining EdExposed Magisk module
- @frank93 for donating Pixel 3a for development
- @bgcngm for his code contributions to the project
- @MohammadAG for Xperia specific contributions to the project
- @rovo89 for his ultimate Xposed framework and "Volume keys to skip track" mod
- @peptonib for starting me up with this project
- @simmac for app icon
- @romracer for Motorola specific code contributions
- @firefds for Samsung specific code contributions
- CyanogenMod project
- ParanoidAndroid project
- Slim, RootBox, AOKP, OmniROM projects
- Sergey Margaritov for ColorPickerPreference
- ArthurHub for Image cropping library
- All those who provided translations for different languages (Mr.Premise, peptonib, kidmar, ch-vox, romashko, Indiant, lelemm, oicirbaf, unavix, LuHash, WedyDQ10, mp3comanche, awaaas, liveasx, samsonbear, Eric850130, xtrem007, benjoe1, asmb111, Fatih Firinci, ...)
- and finally, all those who keep the project alive by supporting me via donations (you know who you are)
Changelog
https://github.com/GravityBox/GravityBox/blob/q/CHANGELOG.txt
Changelog 10.1.2 - 07/03/2021
- Clock: reverted to old hooking strategy for better compatibility
- Dialer: adjusted for compatibility with the latest Google Dialer
--- fixes muting Dialpad tones during UNC Quiet Hours
Developed and tested on:
- OnePlus 7 Pro running OxygenOS
- Pixel 3a running Google OS
- Nexus 5X running Pixel Experience
Current issues
- Power: Proximity wake up not working on OP7Pro (and maybe other devices) due to proximity sensor not reporting proper value until device is fully awaken
- Key actions: Home double-tap not working
- Key actions: Haptic-feedback on OxygenOS may feel a little delayed on keys that have actions defined; as it is performed on key release to avoid double vibrations
- Lockscreen: Changed custom carrier text won't appear immediately
- ... + potentially others mainly device/system variation specific
Design changes
- Navigation bar dimension changes require reboot
Download
https://github.com/GravityBox/GravityBox/releases/tag/v10.1.2_q
Module is also available in official Xposed Repository and LSPosed repository.
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
they are enabled in module settings. This is EdXposed limitation/glitch
Commit history
Commit history for transition from 10.1.1 to 10.1.2
Just saw play store unlock key got updated, then see your post. Thanks for your great work!
Thanks..cant wait to try this once my phone gets android 10 support.
edison0354 said:
Just saw play store unlock key got updated, then see your post. Thanks for your great work!
Click to expand...
Click to collapse
Pardon my ignorance, but what's play store unlock key? Thanks
hallo dare said:
Pardon my ignorance, but what's play store unlock key? Thanks
Click to expand...
Click to collapse
He's talking about "GravityBox Unlocker".
Sent from my #FlagshipKiller6T using Tapatalk
Working pretty well right off the bat. Thanks! Gotta have my status bar brightness tweak!
OP7pro
Some tweaks are superfluous on OOS 10, but of course this mod isn't exclusive to OOS.
Haven't yet tested if enabling both stock and GB tweaks simultaneously causes hiccups
Humble request eventually. I've been trying out OOS gestures; it would be cool to add tweaks to those such as slide and hold back gesture for custom actions.
Great work!
C3C076 said:
Changelog 10.0.0-beta-1 - 28/09/2019
- Initial beta version for Android 10
Developed and tested on:
- OnePlus 7 Pro running OxygenOS
Current issues
- Power: Proximity wake up not working on OP7Pro (and maybe other devices) due to proximity sensor not reporting proper value until device is fully awaken
- Key actions: Home double-tap not working
- Key actions: Haptic-feedback on OxygenOS may feel a little delayed on keys that have actions defined; as it is performed on key release to avoid double vibrations
- Key actions: action to kill foreground app not working
- Lockscreen: Changed custom carrier text won't appear immediately
- Media: Expanded volume panel is not linked to stock expand button functionality of OxygenOS
- ... + potentially others mainly device/system variation specific
Design changes
- Navigation bar dimension changes require reboot
EdXposed related recommendations
- For OxygenOS, make sure to use version with a Bootloop fix from here: https://github.com/ElderDrivers/EdXposed/pull/354 (YAHFA version seems to be more stable)
- Keep Resource hooking support disabled in EdXposed Installer settings if possible, as EdXposed doesn't seem to be stable enough in that part
Download
https://github.com/GravityBox/GravityBox/releases/tag/v10.0.0-beta-1_q
Module will be available in Xposed Repository as soon as it is considered stable enough.
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Commit history
Full commit history for migration from Pie to Q
Click to expand...
Click to collapse
i just installed this and made a few mods on my status bar etc. do you happen to know if this cause battery drain?
If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
LOS 17
Moto G3
Edxposed 4.5.5 sandhook
Gravity Box V10 beta-1
While ik custom rom support isn't guaranteed, LOS17 codebase at the moment is very close to AOSP and they've yet to add any navbar customization
Also the reason for me to set navbar heights to 0 instead of disabling the navbar outright is that the back gesture of Q relies on the navbar being enabled while the bottom swipe gestures don't need a navbar to work
Any possibility of a 4G/LTE toggle on Q. As well as a toggle for LTE+ as some carriers disable said icons in certain regions.
Sent from my Google Pixel 3a XL using XDA Labs
---------- Post added at 06:35 AM ---------- Previous post was at 06:06 AM ----------
DanGLES3 said:
If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
Click to expand...
Click to collapse
Also, can confirm this happens on stock for me to.
Sent from my Google Pixel 3a XL using XDA Labs
buzzaldrine said:
i just installed this and made a few mods on my status bar etc. do you happen to know if this cause battery drain?
Click to expand...
Click to collapse
GravityBox is designed with care regarding battery consumption, so no, there shouldn't be any unexpected battery drain nor long-term wake locks.
DanGLES3 said:
If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
LOS 17
Moto G3
Edxposed 4.5.5 sandhook
Gravity Box V10 beta-1
While ik custom rom support isn't guaranteed, LOS17 codebase at the moment is very close to AOSP and they've yet to add any navbar customization
Also the reason for me to set navbar heights to 0 instead of disabling the navbar outright is that the back gesture of Q relies on the navbar being enabled while the bottom swipe gestures don't need a navbar to work
Click to expand...
Click to collapse
Skittles9823 said:
Any possibility of a 4G/LTE toggle on Q. As well as a toggle for LTE+ as some carriers disable said icons in certain regions.
Also, can confirm this happens on stock for me to.
Sent from my Google Pixel 3a XL using XDA Labs
Click to expand...
Click to collapse
There was config_show4GForLTE in GravityBox / Advanced Tuning / SystemUI available in Pie but it's no longer there on Q so it seems like it was removed in Q.
Regarding navbar 0 dimensions. Hard to tell as I can't reproduce on OP7Pro.
This feature overrides framework config values so it is quite mystery to me that different values could be read from config after orientation change.
Resource config value replacement happens no matter what orientation, and always when config values are referenced.
Also, when your device has vertical navbar in ladnscape, you must set "Navigation bar width" to 0 instead of landscape height.
Edit: also try what kind of results you get when activating Expanded desktop using "Hide navigation bar" mode.
(Expanded desktop mode can be set in Display tweaks. Expanded desktop mode can be activated either from the power menu or using QS tile
Current Expanded desktop state is persisted across reboots).
Is that padding normal ?
and WiFi with Vibration Mode disappeared
C3C076 said:
There was config_show4GForLTE in GravityBox / Advanced Tuning / SystemUI available in Pie but it's no longer there on Q so it seems like it was removed in Q.
Click to expand...
Click to collapse
Well that's unfortunate. I'll have to speak to my carrier and see if I can get it changed, or something. I doubt they'll go through with it but it's worth a shot.
Sent from my Google Pixel 3a XL using XDA Labs
Systemless? I use GPay all the time and I want to try this out. Magisk hide works right now and idk if it will work with GB.
can't try this module as after installing riru and edxposed modules I get a bootloop
you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:
magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
magisk-riru-core-v19.5.zip
any clue? tia
FcukBloat said:
can't try this module as after installing riru and edxposed modules I get a bootloop
you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:
magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
magisk-riru-core-v19.5.zip
any clue? tia
Click to expand...
Click to collapse
Try switching to the Yahfa backend. I had the same issue as well initially but after switching all was fine. It seems to be far more stable compared to sandhook.
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
Try switching to the Yahfa backend. I had the same issue as well initially but after switching all was fine. It seems to be far more stable compared to sandhook.
Sent from my Google Pixel 3a XL using XDA Labs
Click to expand...
Click to collapse
thanks will try as soon as I hopefully fix the bootloop, didn't consider the YAHFA version because was reported to be for OOS. will see thanks again!
Hi,
Just installed Q version but at the same time that XPRIVACY which caught me in a bootloop...
Now it's fully working on my Pixel 3A running QP1A.190711.020.C3, EXKERNEL and XPOSED 4470 (last canary).
I'm also becoming a donator since I've used your plugin since my 1st android device running kit kat!
Thanks a lot!
Edit : Been using Sandhook version.
First bug : after enabling more steps to audio control, process android.media gets a lot of forced closed.
Wolfblade1215 said:
Systemless? I use GPay all the time and I want to try this out. Magisk hide works right now and idk if it will work with GB.
Click to expand...
Click to collapse
EdXposed passes SafetyNet and uses Magisk, so yes it is 'systemless'
FcukBloat said:
can't try this module as after installing riru and edxposed modules I get a bootloop
you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:
magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
magisk-riru-core-v19.5.zip
any clue? tia
Click to expand...
Click to collapse
Because you didn't read much regarding EdXposed compatibility. The stable release of EdXposed is still not compatible with Q. You need to use the fix zips which are available under Pull Requests in GitHub page of EdXposed.
Sent from my #FlagshipKiller6T using Tapatalk
DarkSJ1998 said:
EdXposed passes SafetyNet and uses Magisk, so yes it is 'systemless' Because you didn't read much regarding EdXposed compatibility. The stable release of EdXposed is still not compatible with Q. You need to use the fix zips which are available under Pull Requests in GitHub page of EdXposed.
Click to expand...
Click to collapse
thanks. well i followed information and links in requirements section in OP... now i realize the yahfa version linked is the fixed one, the sandhook version links to the old non-fixed one
FEATHER PROJECT
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Index:
OneUI 4:
|--> Galaxy S10e port for A20 Click here discontinued
OneUI 5
|--> Galaxy S22 port for A20 Click here Priority updates
|--> Galaxy M12 port for A20 Click here
Latest ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
More credits mentioned in sub pages
Release Date: 2023-04-02
Last Updated 2023-04-02
FEATHER PROJECT S22 T
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Features:
Based on S901BXXU4CWCG
Security Patch April 2023
OneUI 5.1 - Android 13
Eureka Kernel R11
Enforcing Selinux
Magisk V-25.2
Samsung Stock AOD
S22 + S23 Wallpapers
Side Key Functions
Edge Panel
Disabled FRP
VoLTE & VoWiFi
Bluetooth Calls
Flagship animations
Samsung Dex
Dolby Atmos
Enhanced GPS
AppLock
A13 Colour Palette
Secure folder pre-patched
BT lib pre-patched
OneUI5 Apps
WiFi Sharing
Bugs:
Safetynet with root only
Face Unlock
Netflix L1
Low light Photos
Moving Apps to Sdcard
Installation:
Spoiler: Installation
Installation Procedure:
Preferred Recovery: Latest TWRP
1. Make a Backup of EFS and all your important data
2. Start by wiping System,Vendor,Product,Data,Cache, Dalvik-Cache
3. Reboot to Recovery
4. Read carefully and select Wisely in Aroma Installer
5. Reboot to System
6. Install Magisk apk normally in the system
7. Update Android System Webview from Play Store by searching it
7. Enjoy
- Dex Touchpad is only supported in newer kernel 10.1+, while the rest of the Dex works fine on all kernels
Changelog:
Spoiler: Changelog
Changelog v0.1:
Initial Release S901BXXU2BVJA
Changelog v0.2:
- update audio hal
- using s10e audio policy for fixing audio
- added sdhms for battery stats
- face unlock removed for stability
Changelog v0.5:
- Added Samsung camera ui5
- Unlocked all cameras in Night mode
- Fingerprint fixed
- Audio fixes
- More minor change
Changelog v0.7
- Updated to new base S901BXXU2BVKB
- Security patch November 2022
- New integrated CSC (Asia + Europe)
- Using full S22 Oneui5 Samsung Camera
- Wide camera disabled in samsung cam
- Updated audio effects from s22
- New audio policy from s22
- Added fix for bt calls from @xnavis
- bt media still ded
- Some apps moved to user apps to save space
- Photo Editor Fixed
- Object Remover from S22 enabled & working
- Added NFC support
- Switched to dtb5
- Using complete aosp partition entries as in eureka.
Changelog v1.0:
- Updated base to S901BXXU2BVL1
- Security Patch 01 December 2022
- Internal tuning
- Graphics improved
- Switched to A51 CSC
- Auto Brightness Fixed
- FOD removed
- AOD unlocked
- AR Camera fixed
- Screen Recorder fix
- Partial fixes for DEX
- Secure Folder Patch
- BT Library Patched
- BT Media and Calls fixed
- More Camera fixups
- Fixed overnight battery drain
- Added headphone fix @xnavis
- Added Voice Focus @GalaxyA51user
Hotfix for v1.0
- Resolves the screenshot issue
Changelog v1.1
- SELinux fixes
- Dex Fixed
- WiFi hal updated
- Switched to aroma installer
- RAW support in Samsung camera
- Unlock uw camera in pro mode
- Some camera modes fixed
- Enabled Motion Photo
- Kernel upgraded to r11 final
- Optional kernels R8 enforcing R9 enforcing R11 permissive
Changelog v2.0
- New Oneui5.1
- Updated to S901BXXU3CWAI
- Security Patch updated
- Bixby added
- S22 and S23 Wallpapers combined
- Audio workaround removed
Changelog v2.1
- GPS fixed
- Quality of Wallpapers enhanced
- Patches for Secure folder
- Added applock @mujammilk_476
- Added camera assistant @GalaxyA51user
- Add R11 Enforcing (lazy)
- Revert to A51 csc
- Added debloat list from @slorixsh
- Added debloat list from @KudretP
- Chrome Audio fix up
Changelog v2.2 beta
- Base updated to S901BXXU3CWBE
- Security update March 2023
- Fixes for widevine L1 (untested)
- Fixed dual speaker mod
- Update menu for debloat
Changelog v3.0 beta
- !! fstab changed. Use Eureka fstab in mods to avoid data format
- Added band selector @FlorinelulX123
- Some more csc tweaks from @GalaxyA51user
- Fixed move App to Sdcard issue
- Fixed testing codes issue
- Fixes for Screen Record issue
- AV1 Decoding Support
- More Codec fixes
- Slightly Aggressive lmk
- Re-tuned Behaviour
Changelog v3.1
- Base updated to S901BXXU4CWCG
- Security patch April 2023
- Revert fstab changes (now Uses Eureka fstab by default)
- Magisk updated to v26.1
- Gpuwatch fixed
- DEX experience improved
- Fix wallpaper issue
- Fix a GPU throttling issue. For reporting @kudretP
- Added Dailyboard @GalaxyA51user
- Added some knox apps
- Photo clipper added by Samsung
- Overhaul audio, report any weird bugs
- Product is now Read only to preserve space
Changelog v3.2
- Fixed Secure Folder issue
- Some more Securities Disabled
Downloads:
Spoiler: Download
Do a brief reading of Installation Notes above before proceeding!
V2.1B
Google Drive : Click Here
Mega : Click Here
V3.2
Direct : Click Here
Mega : Click Here
Credits:
@kevios12 & @FlorinelulX
@Chatur27 & @Royna For Eureka Kernel
@TBM 13 for his RAW Capture libs
@ianmacd for multidisabler
@ricci206 for Secure Folder patch
@MrWaehere for CRB Kitchen
@amarullz for Aroma Installer
@GalaxyA51user for Tweaks
@mojave0 (github) for Aroma theme
@xnavis (telegram) for helping with patches
missing someone? dm me
ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
Release Date: 20-04-2023
Last Updated 20-04-2023
FEATHER PROJECT M12 T
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Features:
Based on M127FXXU4DWC4
Security Patch March 2023
OneUI 5.1 - Android 13
Eureka Kernel R11
Enforcing Selinux
Magisk V-25.2
FM Radio
S22 + S23 Wallpapers
Edge Panel
Disabled FRP
VoLTE & VoWiFi
Bluetooth Calls
Flagship animations
Samsung Dex
Dolby Atmos
Enhanced GPS
AppLock
A13 Colour Palette
Secure folder pre-patched
BT lib pre-patched
OneUI5 Apps
WiFi Sharing
Why M12 ? :
Netflix Widevine L1
Signature Verification Nuked
Working FM Radio
Better Ram Management
Bugs:
Safetynet with root only
Face Unlock
Low light Photos
Moving Apps to Sdcard
Installation:
Spoiler: Installation
Installation Procedure:
Preferred Recovery: Latest TWRP
1. Make a Backup of EFS and all your important data
2. Start by wiping System,Vendor,Product,Data,Cache, Dalvik-Cache
3. Reboot to Recovery
4. Read carefully and select Wisely in Aroma Installer
5. Reboot to System
6. Install Magisk apk normally in the system
7. Update Android System Webview from Play Store by searching it
7. Enjoy
Changelog:
Spoiler: Changelog
V2.0
- Base updated to M127FXXU4DWC4
- Security Patch March 2023
- Fixed Game Tools
- Fixed Blue Light Filter
- Fixed Extra Dim
- Some Camera Issues fixed @duhansysl
- Magisk Updated to v26.1
- Full GCAM Pre Installed
- Camera RAW support enabled
- better gaming @slorixsh
- Added R11 Enforcing
- S22 + S23 Wallpapers
- Spotify Audio issue resolved
- Fix Wired headphones issue
- Added option to Disable Extended Brightness
- Added optional Light LMK
- Added Object Eraser
- Added Reflection Remover
- Added Object Clipper
- Fixed Fingerprint issue
V2.1
- Fixes for AppLock
- Camera improved
- Sleep App Function fixed
- Minor Fixes
Downloads:
Spoiler: Download
Do a brief reading of Installation Notes above before proceeding!
V2.1
Gdrive: Click here
Credits:
@kevios12 & @FlorinelulX
@Chatur27 & @Royna For Eureka Kernel
@TBM 13 for his RAW Capture libs
@ianmacd for multidisabler
@ricci206 for Secure Folder patch
@MrWaehere for CRB Kitchen
@amarullz for Aroma Installer
@GalaxyA51user for Tweaks
@mojave0 (github) for Aroma theme
@xnavis (telegram) for helping with patches
missing someone? dm me
ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
Release Date: 12-04-2023
Last Updated 12-04-2023
This rom is soo good, thanks raptor!
This ROM is beautiful (Talking about S22 port). I'm a developer and test apps on A20, would it be possible if you add KLMS and other Knox Related stock apps please? I need knox license activation only. (I know rooting breaks knox but the KLMS agent etc they do work while being rooted. I'm using all of that stuff on my rooted S21 FE and they work fine).
Edit: As my S21 FE is also Android 13, I will try to copy all Knox related stuff into this and check !
zubair1836 said:
if you add KLMS and other Knox Related stock apps please? I need knox license activation only.
Click to expand...
Click to collapse
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
RiskyEagle said:
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
Click to expand...
Click to collapse
Thanks for quick reply. I'd prepare the list.
For now, I've manually copied the files as I said and it worked but when I restarted the phone. It locked me "Phone Locked, Authorization needed" and there was no way out.
I've wiped everything again and flashed again (this time with my original CSC because I think that could have caused that).
I'll get back to you after checking out everything.
RiskyEagle said:
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
Click to expand...
Click to collapse
It's strange that flashing a different CSC locks the phone.
Anyways, The required files are the folders names as KLMSAgent, KnoxCore, KnoxPushManager,knoxvpnproxyhandler and KPECore.
They should be at /system/priv-app/
For now, I've made it work. But it'd be lovely if you include them in next update.
Many thanks for this Beauty
This is a realy nice ROM. Great work !!! Would it be possible to add Samsung stock Radio app?
Trying this new rom, so one question is possible add more buttons like download mod, recovery mod in turn off menu?
Amazing Rom!
does it work for A207F ?
zubair1836 said:
Anyways, The required files are the folders names as KLMSAgent, KnoxCore, KnoxPushManager,knoxvpnproxyhandler and KPECore.
They should be at /system/priv-app/
For now, I've made it work. But it'd be lovely if you include them in next update.
Click to expand...
Click to collapse
The required files are now optional in aroma. Selecting the option will remove the knox apps.
Please do notify me about your experience.
Version Update v3.2
Major Changes:
- Added Dailyboard
- Added Object Clipper Feature
- GPU Watch fixed
- April 2023 Security Patch
Downloads are updated in the main post
RiskyEagle said:
Version Update v3.2
Major Changes:
- Added Dailyboard
- Added Object Clipper Feature
- GPU Watch fixed
- April 2023 Security Patch
Downloads are updated in the main post
Click to expand...
Click to collapse
Thanks for the Knox stuff as well.
Dirty flash possible?
BasitQayyum said:
does it work for A207F ?
Click to expand...
Click to collapse
A20s is not supported
lux070 said:
This is a realy nice ROM. Great work !!! Would it be possible to add Samsung stock Radio app?
Click to expand...
Click to collapse
Stock Radio is not available in this version due S22 not supporting it.
btw Radio is available in a51 and m12 oneui5 port. Currently only at telegram for beta testing
Eliather said:
Trying this new rom, so one question is possible add more buttons like download mod, recovery mod in turn off menu?
Click to expand...
Click to collapse
I would add those but they make the system less responsive on this low end device. Also a hassle to provide security updates.
zubair1836 said:
Thanks for the Knox stuff as well.
Dirty flash possible?
Click to expand...
Click to collapse
Dirty Flash should be possible, but do a clean flash if you face bugs.
Also do take a look at installation procedure as it is also updated
Does Samsung A20e is supported ?
Fury_Craft said:
Does Samsung A20e is supported ?
Click to expand...
Click to collapse
If any a20e user is available for testing, We can add support for it.
RiskyEagle said:
If any a20e user is available for testing, We can add support for it.
Click to expand...
Click to collapse
Hi I have the a20e for testing thanks