Hello.my nightmare started yesterday. my s6 edge was working properly,sometimes was freezing, i said no problem , i flash it with odin and it's like brand new at the first try with odin and original firmware , odin was starting to flash then nand write and the icon was red and say : FAIL . i read on this forum that i need to flash twrp and i downloaded "TWRP-3.0_MM_S6-edge_by_ManhIT.tar" , i flashed it. and was entering into twrp. was 3 AM then i went to sleep . today i tried again to flash my phone with original firmware , another fails. I flashed again "TWRP-3.0_MM_S6-edge_by_ManhIT.tar" but now doesn't enter into twrp , it enters only in download mode for odin and fails everytime. and another problem , when phone is off and i plug it in , it shows the battery but is not charging , when i unplug it , imediately shuts off.
So my question is , how can i flash my phone with odin without giving erors?
i have to flash "TWRP-3.0_MM_S6-edge_by_ManhIT.tar" then install "SR5-SuperSU-v2.78-SR5-20161130091551" and then odin will work ?
but now my problem is that if i flash twrp it doesn't enter into twrp menu. just shows battery then shuts down.
any advices ? please help me
any help would be apreciated
sshhhhhttttt said:
Hello.my nightmare started yesterday. my s6 edge was working properly,sometimes was freezing, i said no problem , i flash it with odin and it's like brand new at the first try with odin and original firmware , odin was starting to flash then nand write and the icon was red and say : FAIL . i read on this forum that i need to flash twrp and i downloaded "TWRP-3.0_MM_S6-edge_by_ManhIT.tar" , i flashed it. and was entering into twrp. was 3 AM then i went to sleep . today i tried again to flash my phone with original firmware , another fails. I flashed again "TWRP-3.0_MM_S6-edge_by_ManhIT.tar" but now doesn't enter into twrp , it enters only in download mode for odin and fails everytime. and another problem , when phone is off and i plug it in , it shows the battery but is not charging , when i unplug it , imediately shuts off.
So my question is , how can i flash my phone with odin without giving erors?
i have to flash "TWRP-3.0_MM_S6-edge_by_ManhIT.tar" then install "SR5-SuperSU-v2.78-SR5-20161130091551" and then odin will work ?
but now my problem is that if i flash twrp it doesn't enter into twrp menu. just shows battery then shuts down.
any advices ? please help me
any help would be apreciated
Click to expand...
Click to collapse
Flash the official TWRP from here
https://twrp.me/devices/samsunggalaxys6edge.html
What error did you get in Odin when flashing firmware?
callumbr1 said:
Flash the official TWRP from here
What error did you get in Odin when flashing firmware?
Click to expand...
Click to collapse
now i flashed succesfully the 3.0.2.0 twrp but i cant acces te twrp menu..while plugged in , the phone shows the battery status,but doesnt charge or something,if i unplug it , it shuts down.
volume + home and power doesnt bring me the menu
no samsung logo or something
any ideas ?:crying:
just flash last stock firmware and your phone should work again, you can root it after
matthew2man said:
just flash last stock firmware and your phone should work again, you can root it after
Click to expand...
Click to collapse
now when i tried to flash with original firmware , it start flashing , then sbot.bin FAIL .
and on phone in download mode sais : "SW REV. CHECK FAIL DEVICE:5 BINARY:4" .
any sugestion?
this exactly :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Related
I have a Samsung S3 on O2 (UK). Yesterday I got a system update notification and I downloaded and installed the update (it was quite big, about 300MB). There were no issues during the install and it restarted fine when it finished, however about an hour later the phone just restarted itself on its own (it was in my pocket) and then just kept looping the restart process over and over. I couldnt get the phone to get passed the logo screen. I tried removing the battery, sim card, etc but nothing helped. I read in a post here to try to use the "Recovery Mode" to restart the device. I did that and it worked, I was able to get the phone started again, but about half an hour later it did exactly the same thing but this time I couldn't get into recovery mode anymore! I read a few more posts on this forum and it looked like the update had soft bricked my phone. I could get the phone into download mode so I thought I would try using Odin to re-install the stock firmware. I followed the instructions on the post to the letter, downloaded the correct firmware from Samsung, installed the USB drivers for the phone but when I tried to use Odin it just said the the update failed. Now when I turn on the phone I get the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I have read a few posts on suggested work arounds but no matter what I try Odin always just gets stuck on "Nand Start Write!!!". I have tried re-installing the USB driver, using a different cable and even a diff computer but always the same.
Can anyone help? This is really annoying. I have never tried to do a root or mess around with the phone so it seems really odd that something like this would happen following a standard update
P.S These are the instructions I followed when I tried to re-install the official firmware - http://forum.xda-developers.com/showthread.php?t=1671969
Boot to recovery factory restore then flash stock firmware via Odin .
jje
JJEgan said:
Boot to recovery factory restore then flash stock firmware via Odin .
jje
Click to expand...
Click to collapse
Its not letting me boot to recovery mode anymore. I can boot to download mode but when I try to boot to recovery mode it just keeps looping the startup screen which at the moment is the error message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Then flash a stock ROM image through Odin
You only need to boot into download mode for odin download the relevant firmware package and odin when you connect it via usb in download mode you will notice the first com port on odin turn yellow to indicate a device is connected
Do a search for detailed instructions buddy
Sent from my GT-N7000 using xda app-developers app
ascottuk said:
You only need to boot into download mode for odin download the relevant firmware package and odin when you connect it via usb in download mode you will notice the first com port on odin turn yellow to indicate a device is connected
Do a search for detailed instructions buddy
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Hmmm. When I connect the phone it makes the sound in Windows that the phone has been connected but then in Odin the com port is blue not yellow. Does that mean that it has not detected the phone properly?
Glebun said:
Then flash a stock ROM image through Odin
Click to expand...
Click to collapse
This is the message I get in Odin when I try to flash the stock firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLIH_I9300O2UDLI3_I9300BWDLI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
You need a service centre with that comment Nand Start Write! .
jje
Yeah, you probably have corrupted NAND :/, take it for warranty repair, they will replace the mainboard. :thumbup:
Sent from my GT-I9300 using xda app-developers app
A few moments ago I was trying to flash the stock ICS firmware to my SGH-I757M using Odin3 v1.85.
But, I made a serious mistake. I didn't notice that "Re-Partition" was checked for some odd reason. The flash failed.
I then restarted Odin and put my phone back into download mode and proceeded to try to re-flash the stock firmware.
It failed yet again.
This is the log from Odin:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I757MUGLH2_I757MOYCLH2_I757MUGLH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone now shows the following error: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried flashing just CWM and that won't work either. Kies also does not connect to the phone.
CharlieMPK said:
A few moments ago I was trying to flash the stock ICS firmware to my SGH-I757M using Odin3 v1.85.
But, I made a serious mistake. I didn't notice that "Re-Partition" was checked for some odd reason. The flash failed.
I then restarted Odin and put my phone back into download mode and proceeded to try to re-flash the stock firmware.
It failed yet again.
Click to expand...
Click to collapse
See if this helps
ysrini said:
See if this helps
Click to expand...
Click to collapse
So, I read through the guide and it does not refer to the SGH-I757M.
Is there something that I'm missing? I don't want to further my issue.
I bricked my SGH-i757m galaxy s2 hd lte
I tried to install Cyanogenmod 10 onto my sgh-i757m but it seems I may have used the wrong links to download the .zip files. I followed standard procedure in recovery mode (factory reset, clear cache) and instead of rebooting my phone just turned off. I had plenty of battery life (over 50%) and I cannot even start recovery mode!
No download mode, no recovery & no signs of life from phone ? Try a jig (highly unlikely to work). Also try King Rat's 'hotboot' method to try & jump start the phone (search). Otherwise, service centre for motherboard replacement or perhaps try a JTAG repairer (assuming it can be JTAG'd).
Dear Fellow Experts,
I am near about to die... seeking advice
I owned a SGSII bellow is config
Android version : 2.3.5
baseband :I9100XXK13
kernel : : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
PDA : i9100zsk13
PHONE : i9100xxk13
CSC : i9100zsk13
Click to expand...
Click to collapse
Its already rooted.ANd I dont know who / how root this set . Also I have format Strogae/Sd card. nothing this there
. And I would like to,update it to ICS official release - which i download for sammobile.com .
last night I tried to update it via odin
i follow all the procedure - Enable USB debug mode -> Reboot in Download mode -> connected to odin -> yellow color shown- >
bellow happend
1st try : ( 9.23am - 10.12am )
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
i have disconnect the phone after 45 minites. unplugged usb cable / remove - insert battery.. sarted the same procedure
2nd start 10.23Am - 11.15am
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
Click to expand...
Click to collapse
2 times I tried - and filed . finally I did a factory reset - I have searched a lot- read thorw a lot- couldnt gater that courage to follow that all those procedure...
Note : Kies also saying - this device cant be update via kies- since its rooted and super user apps is there
Some one wise - pls advice what to do and how to do? or where to find a solution.
You know you're not suppose to have Kies on your computer while using Odin to flash?
He is right.. Kill all kies processes before you connect your mobile to pc for using odin
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
He is right.. Kill all kies processes before you connect your mobile to pc for using odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello
That PC dont have Kies - but have USB driver downloaded from sammobile.
what to do now?
Nneel said:
Dear Fellow Experts,
I am near about to die... seeking advice
I owned a SGSII bellow is config
Its already rooted.ANd I dont know who / how root this set . Also I have format Strogae/Sd card. nothing this there
. And I would like to,update it to ICS official release - which i download for sammobile.com .
last night I tried to update it via odin
i follow all the procedure - Enable USB debug mode -> Reboot in Download mode -> connected to odin -> yellow color shown- >
bellow happend
2 times I tried - and filed . finally I did a factory reset - I have searched a lot- read thorw a lot- couldnt gater that courage to follow that all those procedure...
Note : Kies also saying - this device cant be update via kies- since its rooted and super user apps is there
Some one wise - pls advice what to do and how to do? or where to find a solution.
Click to expand...
Click to collapse
First of all , you have to do a factory reset and dont choose USB Debugging (It doesn't matter)
after you have done factory reset (Erase USB Storage too) , You Need To Power Off Your Device then you need to put your phone in Download Mode (Power + Home + Volume Down) , you will get a Yellow Warning , You need to press Volume Up key, then you are in download mode, now you have to make sure that Kies is not running on your PC and then run ODIN (Run As Administrator), after running ODIN, you need to connect your phone via USB .. Odin Will say Added!
After that you have to just choose the .zip file (Downloaded from Sammobile) on PDA and then just click start (Make sure re-partition is not checked, it should be un-ticked)..
and just wait and have patience your phone will be rebooted once its done
Hope it helps
After looking at many XDA pages and other android related forums I have not found a problem to my solution which has left my phone unusable for two months.
My phone is stuck at the Samsung boot screen, it is not looping, it just stays there when the phone turns on - indefinitely, I CAN enter both recovery mode and download mode (a lot of people with similar problems cannot enter recovery) but when attempting to flash anything at all I get a NAND write start failure regardless of the cable, computer and version of Odin I use. I have attempted to use a few PIT files but these get stuck at the "REPARTITION" stage and I am forced to unplug the phone to try again. The phone is rooted and I cannot as many of you will know send it back to Samsung (still in warranty) due to the flash counter being greater than zero.
If there is any further information required please ask.
hawkar13 said:
After looking at many XDA pages and other android related forums I have not found a problem to my solution which has left my phone unusable for two months.
My phone is stuck at the Samsung boot screen, it is not looping, it just stays there when the phone turns on - indefinitely, I CAN enter both recovery mode and download mode (a lot of people with similar problems cannot enter recovery) but when attempting to flash anything at all I get a NAND write start failure regardless of the cable, computer and version of Odin I use. I have attempted to use a few PIT files but these get stuck at the "REPARTITION" stage and I am forced to unplug the phone to try again. The phone is rooted and I cannot as many of you will know send it back to Samsung (still in warranty) due to the flash counter being greater than zero.
If there is any further information required please ask.
Click to expand...
Click to collapse
Which recovery?
What else does it say in Download mode?
wangdaning said:
Which recovery?
Click to expand...
Click to collapse
CWM recovery
rootSU said:
What else does it say in Download mode?
Click to expand...
Click to collapse
Here is the log from Odin v3.07 using a stock rom:
==================================================================================
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMC2_I9300OXAEMC2_1042335_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
==============================================================================================
Service repair Nand damaged .
jje
Sorry, I meant on the phone screen
Sent from my GT-I9300 using Tapatalk 2
Did you get any further with this? I can't get into recovery mode but download mode is showing the product name correctly, unlike with many of the others. Is all hope lost for my NAND / Phone?
velkrosmaak said:
Did you get any further with this? I can't get into recovery mode but download mode is showing the product name correctly, unlike with many of the others. Is all hope lost for my NAND / Phone?
Click to expand...
Click to collapse
Try flashing a recovery with Odin or reflash stock ROM
slaphead20 said:
Try flashing a recovery with Odin or reflash stock ROM
Click to expand...
Click to collapse
Tried that, but Odin fails when it gets to start writing to the NAND. Any other ideas?
velkrosmaak said:
Tried that, but Odin fails when it gets to start writing to the NAND. Any other ideas?
Click to expand...
Click to collapse
Requires a new motherboard .
jje
So I was trying to unroot my phone, to be able to play that new mobile nintendo game of all things and in the process of that got myself stuck in a boot loop, with my wits I tried on my own to get my phone out of the loop. With the TWRP recovery thing in hand I had mangaed to complete wipe my device I think. So now, it will load up to the sprint screen and sit there. I can boot up into TWRP and into the download mode; I don't think I can boot into the stock recovery thing. I tried to use Odin to get a OS onto my device but it said this "<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
And on my phone it had said
SW REV CHECK FAIL DEVICE 3 BINARY 1
Please help me on this, I would rather not just have a soft bricked phone out of my own stupidity.
also not really sure what fastboot is but I don't think I can access it, When i try to hold the power vol up, down. It just turns the phone off (?) and shows the battery charging.
If you can go into recovery mode you just adb push a rom from your pc.
http://highonandroid.com/android-ro...r-android-in-a-bootloop-with-no-os-using-adb/
StillLiam said:
So I was trying to unroot my phone, to be able to play that new mobile nintendo game of all things and in the process of that got myself stuck in a boot loop, with my wits I tried on my own to get my phone out of the loop. With the TWRP recovery thing in hand I had mangaed to complete wipe my device I think. So now, it will load up to the sprint screen and sit there. I can boot up into TWRP and into the download mode; I don't think I can boot into the stock recovery thing. I tried to use Odis to get a OS onto my device but it said this "<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
And on my phone it had said
SW REV CHECK FAIL DEVICE 3 BINARY 1
Please help me on this, I would rather not just have a soft bricked phone out of my own stupidity.
Click to expand...
Click to collapse
When i did this go into twrp and clear delvik. Cache. System
Sd card. And usb check em all coach.
Do it then reboot system and quickly press (power - volume down - and menu key all at once. Download a completely stock rar and install it using odin .
The id005 thing is all good . Dont mess with settings jusy navigate to .tar and flash
ilqs said:
If you can go into recovery mode you just adb push a rom from your pc.
Click to expand...
Click to collapse
As I had said up there I cant boot into recovery mode, whenever I try to my phone just boots into TWRP.
bipolargroup said:
When i did this go into twrp and clear delvik. Cache. System
Sd card. And usb check em all coach.
Do it then reboot system and quickly press (power - volume down - and menu key all at once. Download a completely stock rar and install it using odin .
The id005 thing is all good . Dont mess with settings jusy navigate to .tar and flash
Click to expand...
Click to collapse
I'm not sure I can get a rom in there through Odin, As I had posted up there whenever I tried to do that it gave me that error.
I would really appreciate some help here, been over 12 hours of me trying to fix it on my own. To no avail.
try samsung smart switch. it will download the original firmware that came with the phone and flash it for you..
success123 said:
try samsung smart switch. it will download the original firmware that came with the phone and flash it for you..
Click to expand...
Click to collapse
How do I do that? Does it require my phone to boot?
as digital tumbleweed passes through
StillLiam said:
As I had said up there I cant boot into recovery mode, whenever I try to my phone just boots into TWRP.
Click to expand...
Click to collapse
Did you see the link? If you can access TWRP you are good. Just follow the guide.
StillLiam said:
How do I do that? Does it require my phone to boot?
Click to expand...
Click to collapse
http://samsungsmartswitch.org/ download it from here. put your phone into download mode and follow the steps
download it from here. put your phone into download mode and follow the steps[/QUOTE said:
I tried using Smart Switch and it didn't recognize my phone. I had tried putting my model number and serial number in on it too in the emergency software thing, didn't recognize it.
Click to expand...
Click to collapse
Shooot. Well id do this if you can still get into twrp you really are safe. Click on twrp and i think under Home advamced. Find the fix file permissions. Do it "JUST IN CASE" .i had this happen to me
Then folllow the post here at this link
Click Me Stock Firmware This worked for me when i was Bricked .No os . No nothing . What do you have to lose
ADB Sideload in worst case
Your last but 100% working hope once executed the right way will be the use of ADB Sideload within TWRP which is your obvious recovery. You will need either a SDcard (not for S6 and Edge), a USB with a direct usb cord, or a PC with USB cord to do this. For PC you will need the ADB SideLoad drivers for your phone model to be installed on your PC. Once installed you can connect your phone via USB to your PC and run the ADB SideLoad executable which will run in a CMD window. I don't know the exact commands anymore, but long story short, you want to push the OS install package (Self-installing OS NOT WITH CUSTOM INSTALL MENU) to your phones internal memory which after you'll need to execute by using TWRP. This i have done myself after i hard bricked my S6 edge the first day i got it. I used (by accident) Nand Erase including every other erase to get it back to work which just only put me to more trouble having me to use ADB SideLoad. I hope this bare information helps you out since i can feel the pain you are going through having to know you may have permanently lost your phone lol... Report back if it helped or if you need any more information regarding ADB SideLoad.
- GhostGurio
Try some other original cable. N try flashing via odin.
Also there sometimes u need to flash with pit file. Not sure though.
I had same problem with my s4. Failing at nand write.
In my case cable thing worked.