HTML:
include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you.*/
MIUI 8 for Zopo Speed 7 / 7+
This rom has been crossported from Xiaomi Redmi Note 2 (MT6795) to this device.
What works?
Audio
Wifi
Bluetooth-a2dp
Camera (photo and video recording)
RIL
GPS
FM
Sensors
Dual apps
Second space
...... All items that I have tested
What doesn't ?
One handheld mode (this device doesn´t have hardware buttons )
Stuff that I might have not noticed
Changelog
Base china 8.1.3 from xiaomi.eu
Download
ROM
Installation
You need to flash over zopo stock Lollipop rom, it will not work over marshmallow rom
Rom on zopo speed 7+ (ZP952) has been not tested
Download the ROM
Put the zip files on your phone
Reboot in Recovery
Wipe Data/System/Cache/Dalvik cache-ART
Install zip file
Reboot system
Enjoy MIUI
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
Xiaomi
Xiaomi.eu
Yow Bushkie
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock lollipop
Based On: Miui 8.1.3 china version
"Tap to wake" is working?
mstdzw said:
"Tap to wake" is working?
Click to expand...
Click to collapse
No that option on miui rom
Enviado desde mi Redmi Note 3 mediante Tapatalk
The german language is included?
[Edit]
Tested installtion without success using carliv touch recovery 6.6.1...
ERROR MESSAGE:
- Formatting system partition...
E: Installation error in /sdcard/Mods/MIUI_ZP951_V8.1.3.0.LHMCNDI.zip (Status 0)
On TWRP 3.0.2 it doesn´t work too...
Do i need an other recovery?
Echse27 said:
The german language is included?
[Edit]
Tested installtion without success using carliv touch recovery 6.6.1...
ERROR MESSAGE:
- Formatting system partition...
E: Installation error in /sdcard/Mods/MIUI_ZP951_V8.1.3.0.LHMCNDI.zip (Status 0)
On TWRP 3.0.2 it doesn´t work too...
Do i need an other recovery?
Click to expand...
Click to collapse
You need to flash over Lollipop stock rom and lollipop recovery.
Enviado desde mi HM 1S mediante Tapatalk
pocaropa said:
You need to flash over Lollipop stock rom and lollipop recovery.
Enviado desde mi HM 1S mediante Tapatalk
Click to expand...
Click to collapse
First i have installed the 5.0.1. Stock Rom via FlashTool.
Then i have unlooked the Bootloader, and installed the carliv cwm.
After that i have copied the .zip file onto the sdcard and reboot to recovery
Then i installed the zip file via menu inside carliv without success.. The error describet above...
The i have testet the twrp recovery 3.0.2 because i think it where possible, that the recovery made the problems...
But also there no way to flash...
At first the system partition can´t be unmountet, but you can choose to mount and unmount this partition in menu.
Second error then ist the data patition can´t be mountet...
So i was on stock lolipop and on a recovery for lolipop...
Echse27 said:
First i have installed the 5.0.1. Stock Rom via FlashTool.
Then i have unlooked the Bootloader, and installed the carliv cwm.
After that i have copied the .zip file onto the sdcard and reboot to recovery
Then i installed the zip file via menu inside carliv without success.. The error describet above...
The i have testet the twrp recovery 3.0.2 because i think it where possible, that the recovery made the problems...
But also there no way to flash...
At first the system partition can´t be unmountet, but you can choose to mount and unmount this partition in menu.
Second error then ist the data patition can´t be mountet...
So i was on stock lolipop and on a recovery for lolipop...
Click to expand...
Click to collapse
1-You need to flash stock ROM 5.1.1 ( you can install twrp recovery on flashtools because on 5.1.1 bootloader is not locked).
TWRP 3.0.0 working for ZP951 (Speed 7)--->https://www.androidfilehost.com/?fid=529152257862702271
Stock 5.1.1 link for ZP951 (Speed 7)--->https://1drv.ms/u/s!AroDeKB1ADpEuS1SBLMNKkuBcKlt
Stock 5.1.1 link for ZP952 (Speed 7 Plus)--->https://1drv.ms/u/s!AroDeKB1ADpEuUTBFTB0R9hn8C29
2-After installing Rom and recovery let the system boot one time.
3-Reboot to recovery and proceed to install miui rom. (Ignore "system partition can´t be unmounted" message)
PD: First boot takes loooooong
Tested 2 times and working
pocaropa said:
1-You need to flash stock ROM 5.1.1 ( you can install twrp recovery on flashtools because on 5.1.1 bootloader is not locked).
TWRP 3.0.0 working for ZP951 (Speed 7)--->https://www.androidfilehost.com/?fid=529152257862702271
Stock 5.1.1 link for ZP951 (Speed 7)--->https://1drv.ms/u/s!AroDeKB1ADpEuS1SBLMNKkuBcKlt
Stock 5.1.1 link for ZP952 (Speed 7 Plus)--->https://1drv.ms/u/s!AroDeKB1ADpEuUTBFTB0R9hn8C29
2-After installing Rom and recovery let the system boot one time.
3-Reboot to recovery and proceed to install miui rom. (Ignore "system partition can´t be unmounted" message)
PD: First boot takes loooooong
Tested 2 times and working
Click to expand...
Click to collapse
Ok... thank you for the guide...
Now i have installed the rom and i will give a feedback when i have tested some features...
greetz
[Edit]
You´re right, the first boot after flashing this rom tooks 15 minutes.
This MIUI 8 runs really smooth on ZP951... great work!!!
The only thing i missed is the standard implementation of root access in permisson app. But that´s a change of miui.
Do anybody know, how i can root miui 8? KingRoot or some other app? Or is there a flashable zip out there?
Greetz
Echse27 said:
Ok... thank you for the guide...
Now i have installed the rom and i will give a feedback when i have tested some features...
greetz
[Edit]
You´re right, the first boot after flashing this rom tooks 15 minutes.
This MIUI 8 runs really smooth on ZP951... great work!!!
The only thing i missed is the standard implementation of root access in permisson app. But that´s a change of miui.
Do anybody know, how i can root miui 8? KingRoot or some other app? Or is there a flashable zip out there?
Greetz
Click to expand...
Click to collapse
For root install supersu zip via recovery:
https://redirect.viglink.com/?forma...s3-us-west-2.amazonaws.com/s...1612051815.zip
Enviado desde mi MI 5s mediante Tapatalk
I've flashed this one
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
and it works great...
So thanks for this miui port for this official exotical device!
Greetz...
I have zopo speed 7 plus 952 version with C.M 12.1 installed with twrp recovery ,cann i flash directly overvrite to C.M 12.1 miui or must first flash original 952 rom and ,twrp recovery and miui. C.M work fine only not working manual network search an i live on Hungary border and this is problem. I want to try with miui whether it works on my Xiaomi mi max work great manual search network. Thanx in advance.
Author said:
I have zopo speed 7 plus 952 version with C.M 12.1 installed with twrp recovery ,cann i flash directly overvrite to C.M 12.1 miui or must first flash original 952 rom and ,twrp recovery and miui. C.M work fine only not working manual network search an i live on Hungary border and this is problem. I want to try with miui whether it works on my Xiaomi mi max work great manual search network. Thanx in advance.
Click to expand...
Click to collapse
If you are on cm12.1 you can flash directly after wipe data, cache and dalvik.
Before installing, do a full backup because the rom is not tested on ZP952.
Enviado desde mi MI 5s mediante Tapatalk
pocaropa said:
If you are on cm12.1 you can flash directly after wipe data, cache and dalvik.
Before installing, do a full backup because the rom is not tested on ZP952.
Enviado desde mi MI 5s mediante Tapatalk
Click to expand...
Click to collapse
@pocaropa thanx in advance I will flash it tomorrow or overmorning and of course report whether miui at 952 functions. Thank you.
Good night.
Author said:
@pocaropa thanx in advance I will flash it tomorrow or overmorning and of course report whether miui at 952 functions. Thank you.
Good night.
Click to expand...
Click to collapse
Ok, in case that doesn't work, I think I can make a patch.
Good night
Enviado desde mi MI 5s mediante Tapatalk
pocaropa said:
Ok, in case that doesn't work, I think I can make a patch.
Good night
Enviado desde mi MI 5s mediante Tapatalk
Click to expand...
Click to collapse
Hi i flash today Miui on my Speed 7 plus version 952.
I flash over C.M 12.1 in twrp delete Dalvik cache,system and data , after flashing Miui i wait cca 10 minutes and phone started.
Wifi work excellent, I restore from my Xiaomi mi max all data and apps wow ,therefore work Miui cloud etc ,great .
Google working,email i use Yahoo working.
Manual the network search I tried a couple of times and left it on the network that I chose. I happy happy happy ,no moore Hungary network .
Internet point is ok, I have a choice of 3g or 4g wow.
Bluetoth work with sinchronising on my Xiaomi smartband . Other possibilities for not using Bluetooth .
Now all I have to try to flash the super and then xposed. This while I'll make how it all works.
Phoning I have not tried it while I try to hear the report and it will.
English was not exactly the best exclusively German and Croatian, so I took a little help from Google Translate. But I think it's quite understandable.
Author said:
Hi i flash today Miui on my Speed 7 plus version 952.
I flash over C.M 12.1 in twrp delete Dalvik cache,system and data , after flashing Miui i wait cca 10 minutes and phone started.
Wifi work excellent, I restore from my Xiaomi mi max all data and apps wow ,therefore work Miui cloud etc ,great .
Google working,email i use Yahoo working.
Manual the network search I tried a couple of times and left it on the network that I chose. I happy happy happy ,no moore Hungary network .
Internet point is ok, I have a choice of 3g or 4g wow.
Bluetoth work with sinchronising on my Xiaomi smartband . Other possibilities for not using Bluetooth .
Now all I have to try to flash the super and then xposed. This while I'll make how it all works.
Phoning I have not tried it while I try to hear the report and it will.
English was not exactly the best exclusively German and Croatian, so I took a little help from Google Translate. But I think it's quite understandable.
Click to expand...
Click to collapse
Good to know that is working on ZP952 too. Thanks for report:good:
pocaropa said:
Good to know that is working on ZP952 too. Thanks for report:good:
Click to expand...
Click to collapse
No problem pocaropa , thanx thank you for your superb job.
I wil report for for possible bugs and others .
Super su installed fork fine.
Here flash xposed everything works now have a module xMUI. One potential problem has until then rebooted the system after the reboot shows me that the breakdown of memory error that now the phone is not safe. Perhaps what an idea what it was.
Author said:
No problem pocaropa , thanx thank you for your superb job.
I wil report for for possible bugs and others .
Super su installed fork fine.
Here flash xposed everything works now have a module xMUI. One potential problem has until then rebooted the system after the reboot shows me that the breakdown of memory error that now the phone is not safe. Perhaps what an idea what it was.
Click to expand...
Click to collapse
Do you mean after install xposed? This is a warning to user ( is normal)
pocaropa said:
Do you mean after install xposed? This is a warning to user ( is normal)
Click to expand...
Click to collapse
No after install Xposed ,before installed .
Only phone work fine .Now I am afraid to flash again. It works well if we rule be any problems then I will see how to proceed. I have yet to test how it works GPS and navigation have Sygic, so I'll answer it. And I have yet to try a call.
Here today I finally tried and GPS navi at Zoop, after starting the GPS and start Sygic navigation within 5 seconds I was found on a map exactly to the meter. Super.
So I tried to talk, signal and sound are excellent. The other party can hear clearly and so I did.
The main speaker produces a loud sound may be a bit deafening but it is not Miui guilty.
So for now, my rating for this Rom 1-5 is the fifth .
@pocaropa You've done an excellent job
Related
I'm using "[ROM] [4.1.2] FlyingThor V2.0 SuperFast | Stable | No Lags | Updated: 28-Oct-2013" and "[Kernel][Dec 12]Experimental v11c[JB 4.1.2]"
I know that instruction say: "7.During second reboot, you will b stuck at Sony LOGO for a while. But don't b panic everything goes right after a while." but even after wait about 5 min it doesn't boot. After take off battery and turn on the phone I can go to cwm after a while. I have to flash rom again so the boot works, but when turn off the phone I'm stucked again.
forvasc said:
I'm using "[ROM] [4.1.2] FlyingThor V2.0 SuperFast | Stable | No Lags | Updated: 28-Oct-2013" and "[Kernel][Dec 12]Experimental v11c[JB 4.1.2]"
I know that instruction say: "7.During second reboot, you will b stuck at Sony LOGO for a while. But don't b panic everything goes right after a while." but even after wait about 5 min it doesn't boot. After take off battery and turn on the phone I can go to cwm after a while. I have to flash rom again so the boot works, but when turn off the phone I'm stucked again.
Click to expand...
Click to collapse
You have error in this ROM because you install a different kernel to the ROM developer, the kernel that is in the ROM is not experimental kernel, is a custom kernel developer, you have two options
1.- Open the zip of the rom and replace the boot.img by the experimental kernel
2.- Extracts the boot.img that is in the ROM and use flashtool to install.
not have to do much, just install the original kernel of the ROM, not the experimental kernel.
you decide
Kobalto07 said:
You have error in this ROM because you install a different kernel to the ROM developer, the kernel that is in the ROM is not experimental kernel, is a custom kernel developer, you have two options
1.- Open the zip of the rom and replace the boot.img by the experimental kernel
2.- Extracts the boot.img that is in the ROM and use flashtool to install.
not have to do much, just install the original kernel of the ROM, not the experimental kernel.
you decide
Click to expand...
Click to collapse
Hi Kobalto07 thanks for your reply. I have to say I'm confused because the instruction in rom post say "1.Install Experimental Kernel Latest Version from here or Flash the Boot.img from the ROM". and that's what I did, but I'll try your sugestion and post the result here.
forvasc said:
Hi Kobalto07 thanks for your reply. I have to say I'm confused because the instruction in rom post say "1.Install Experimental Kernel Latest Version from here or Flash the Boot.img from the ROM". and that's what I did, but I'll try your sugestion and post the result here.
Click to expand...
Click to collapse
is a pleasure to collaborate
yeah, he said that, happens is that the experimental kernel is updated continued, then the version that put the developer un the ROM will obsolete.
then the developer leaves the user will decide kernel to use
I will be attentive to your results.
Enviado desde mi Xperia U mediante Tapatalk
Kobalto07 said:
is a pleasure to collaborate
yeah, he said that, happens is that the experimental kernel is updated continued, then the version that put the developer un the ROM will obsolete.
then the developer leaves the user will decide kernel to use
I will be attentive to your results.
Enviado desde mi Xperia U mediante Tapatalk
Click to expand...
Click to collapse
Hi Kobalto07, I extracted boot.img from rom zip and flash it using flashtool but I still have the same result.
This time I waited about 8 min the 2nd reboot but get stucked at sony logo.
forvasc said:
Hi Kobalto07, I extracted boot.img from rom zip and flash it using flashtool but I still have the same result.
This time I waited about 8 min the 2nd reboot but get stucked at sony logo.
Click to expand...
Click to collapse
Hello
I guess that after flashing kernel you did full wipe and reinstall the ROM right?
Enviado desde mi Xperia U mediante Tapatalk
Kobalto07 said:
Hello
I guess that after flashing kernel you did full wipe and reinstall the ROM right?
Enviado desde mi Xperia U mediante Tapatalk
Click to expand...
Click to collapse
Of course... NOT
I didn't do full wipe. I'm lazy and don't want to install everything again.
But I'll do that and let you know. Thanks again.
forvasc said:
Of course... NOT
I didn't do full wipe. I'm lazy and don't want to install everything again.
But I'll do that and let you know. Thanks again.
Click to expand...
Click to collapse
as they say, all that begins well ends well if you have everything in order, flash kernel in the zip, make full wipe and install ROM, your device will thank you xD
Enviado desde mi Xperia U mediante Tapatalk
Kobalto07 said:
as they say, all that begins well ends well if you have everything in order, flash kernel in the zip, make full wipe and install ROM, your device will thank you xD
Enviado desde mi Xperia U mediante Tapatalk
Click to expand...
Click to collapse
Hi Kobalto07, still not worked even doing everything according to your instructions so I flashed CM11 and the phone boot normaly. I flashed FlyingThor again according to your instructions, but besides full wipes I did a dalvik cache wipe and formated the system partition. Everything is working now. Thanks for your help.
hello everyone
I have yodarom v10.0 installed on my Honor 7, the developper stopped the developpement, and I would like to updated to another custom rom, based on B371.
1- How do I do this update, should I have to come back to stock rom first?
2- Wich custom rom do you think I should install, I hesitate , "Pure Emui" or H7cRom ? and why?
Thanks
All these roms have the same base , you dont need to go back to stock.
i run MMplusKang by WBT,the support is very good and the K-Settings features awesome
fredfred41 said:
hello everyone
I have yodarom v10.0 installed on my Honor 7, the developper stopped the developpement, and I would like to updated to another custom rom, based on B371.
1- How do I do this update, should I have to come back to stock rom first?
2- Wich custom rom do you think I should install, I hesitate , "Pure Emui" or H7cRom ? and why?
Thanks
Click to expand...
Click to collapse
Just boot into TWRP recovery.
Wipe data/factory reset. RECOMMENDED
Install the ROM of your choice.
Enjoy!!!
Sent from my PLK-L01 using Tapatalk
ok thanks both for your answers
I just installed and restored my settings and apps, with my hisuite backup.
90% worked well..
Just stucked at boot logo when trying to install xposed v86 sdk 23 arm64...
Do you have a simple workaround
Thanks, if it s not working I will try MM+Kang
vvv.phonandroid.com/forum/mm-kang-by-wbteam-v2-1-t157092.html
I would rather not to have to reinstall everything, But If I m forced to.. And the team seems french, It would be easier for me.
Thanks again
fredfred41 said:
ok thanks both for your answers
I just installed and restored my settings and apps, with my hisuite backup.
90% worked well..
Just stucked at boot logo when trying to install xposed v86 sdk 23 arm64...
Do you have a simple workaround
Thanks, if it s not working I will try MM+Kang
vvv.phonandroid.com/forum/mm-kang-by-wbteam-v2-1-t157092.html
I would rather not to have to reinstall everything, But If I m forced to.. And the team seems french, It would be easier for me.
Thanks again
Click to expand...
Click to collapse
After flashing Xposed you have to wait for a pretty much long time, it stays on boot screen according to the number of apps installed.
Sent from my Honor 7 using Tapatalk
Hi,
+1 with DigiGoon the boot is very long ,about 20mn for me.
I confirm we'r french but our rom run DigiGoon's kernel (simply the best)
DigiGoon said:
After flashing Xposed you have to wait for a pretty much long time, it stays on boot screen according to the number of apps installed.
Sent from my Honor 7 using Tapatalk
Click to expand...
Click to collapse
I waited, and it worked, thanks.
samcro94 said:
Hi,
+1 with DigiGoon the boot is very long ,about 20mn for me.
I confirm we'r french but our rom run DigiGoon's kernel (simply the best)
Click to expand...
Click to collapse
On first boot, after installing xposed, or everytime the phone boot?
Maybe I will give a try, later..
On the first boot.
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What works?
Audio
Wifi
Bluetooth-a2dp
Camera (photo and video recording)
RIL
GPS
FM
What doesn't ?
Smartcover
Tap to wake
Live display (works but lags device)
Stuff that I might have not noticed
Changelog
Initial build
Downloads
ROM
Gapps
Build 2 (08-nov-2016)
-Changes on device and vendor- fixed build
-Updated sources
-Fixed bluetooth a2dp
Downloads
ROM:
Speed 7+(ZP952)
Speed 7(ZP951)
Gapps
Last build 3 (21-jan-2017)
-Fix magnetic sensor thanks to @wonia
Downloads
ROM:
Speed 7+(ZP952)
Speed 7(ZP951)
Gapps
Installation
You need to unlock your bootloader and install a custom recovery. An easy solution to do this:
http://forum.xda-developers.com/speed-7-plus/development/script-unlock-bootloader-carliv-t3486336
and then:
Download the ROM
Download GApps package (optional)(arm64-pico recommended)
Put the zip files on your phone
Reboot in Recovery
Wipe Data/System/Cache/Dalvik cache-ART or wipe pre_flash on carliv
Install CM13 zip file
Install GApps zip file (optional)
Reboot system
Go to setting/display & lights/live display and select to OFF (otherwiswe your system becomes laggy)
Credits
Specially to:
@Deepflex for device tree and
@lucky76 for adapt to ulefone metal
And:
@BlueFlame4
M.A.D Team
@bluefirebird
Let me know if I forgot someone!
Please don't mirror the ROM anywhere, thanks!!
XDA:DevDB Information
Cyanogenmod 13, ROM for the Zopo Speed 7 Plus
Contributors
pocaropa
Source Code: https://github.com/pocarropa/android_device_zopo_zp951
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock marshmallow
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-10-24
Last Updated 2017-01-21
reserved
Nice!
Live Display needs kernel changes, see https://github.com/visi0nary/androi...mmit/053310ed91c1759f8ebc5f9a8f567a485b94606c and https://github.com/visi0nary/androi...mmit/ffffdaee6c5d09e6115aa8393993208cda30f8f2
Device needs this then: https://github.com/visi0nary/androi...mmit/eb4537ec21e52f4575d94465558dd78b4b184b59
Good luck!
PS: Do you use MM or L camera blobs?
BlueFlame4 said:
Nice!
Live Display needs kernel changes, see https://github.com/visi0nary/androi...mmit/053310ed91c1759f8ebc5f9a8f567a485b94606c and https://github.com/visi0nary/androi...mmit/ffffdaee6c5d09e6115aa8393993208cda30f8f2
Device needs this then: https://github.com/visi0nary/androi...mmit/eb4537ec21e52f4575d94465558dd78b4b184b59
Good luck!
PS: Do you use MM or L camera blobs?
Click to expand...
Click to collapse
Thanks for the hint!!
The fact I am using MM prebuilt kernel because I don't have source for MM and to be honest, I don't know how to fix build rejects on LL and even less update to MM.[emoji17]
I am using MM blobs from last official stock rom.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Cool, i will give it a try...
installation was fine
found no errors
then i installed super -su for root
and suddenly massive ghost-touches occured on my display
its really horrible....
what should i do?
anersxda said:
installation was fine
found no errors
then i installed super -su for root
and suddenly massive ghost-touches occured on my display
its really horrible....
what should i do?
Click to expand...
Click to collapse
Don't install supersu!
If you want to be root, just go to developer options and allow root access.
Now you should reinstall cm and gapps as per first post.
Enviado desde mi Redmi Note 3 mediante Tapatalk
thanks for the quick reply...
also in the recovery the ghost touches appear,
i think thats not good
will try installing whole new procedure with sp-flash tool and stock rom...
pocaropa said:
Don't install supersu!
If you want to be root, just go to developer options and allow root access.
Now you should reinstall cm and gapps as per first post.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Do you use carliv MM recovery for installation?
In my case, touch does not work in revovery mode
Enviado desde mi Redmi Note 3 mediante Tapatalk
very nice, i'll try that rom.
one Problem: bluetooth speaker are connected but there is no sound...
greets
juelue
no i use twrp 3.0.2 by jemini
so far it worked but now the ghost touches...
still try....
pocaropa said:
Do you use carliv MM recovery for installation?
In my case, touch does not work in revovery mode
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Without haste, it will also be released for Zopo Speed 7 Plus ?
Best Regards...
pikka68 said:
Without haste, it will also be released for Zopo Speed 7 Plus ?
Best Regards...
Click to expand...
Click to collapse
I can do it in a few days if you want to test it
Enviado desde mi Redmi Note 3 mediante Tapatalk
pocaropa said:
I can do it in a few days if you want to test it
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
ok, if you can!
Yes, I will try
Enviado desde mi Redmi Note 3 mediante Tapatalk
@anersxda , can you upload twrp used?
Enviado desde mi Redmi Note 3 mediante Tapatalk
i used this recovery:
http://www.needrom.com/download/twrp_302-android-6/
i could not restore my phone. still massive ghost touch...
restored from backup, restored stock.....everywhere the same....
last option: send it back to zopo
pocaropa said:
@anersxda , can you upload twrp used?
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
pocaropa said:
I can do it in a few days if you want to test it
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
I love you so much, thank you!
anersxda said:
i used this recovery:
http://www.needrom.com/download/twrp_302-android-6/
i could not restore my phone. still massive ghost touch...
restored from backup, restored stock.....everywhere the same....
last option: send it back to zopo
Click to expand...
Click to collapse
Is a known problem on some units of this device; screen flickering.... You can try older versions with spflashtools, some users report "better results".
Enviado desde mi Redmi Note 3 mediante Tapatalk
@pocaropa
Can U provide mini tutorial for Carliv recovery,it's new for me,and thank's for Ur maintence on this tread!
Adapted oficial ROM with @mparus kernel
Flash this recovery ( only work whit this)
https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
Flash rom
Flash adaptation zip
Flash navbar
Flash gapps
For update ThE shame operation with wipes cache and dalvik,system
Adaptation zip
Enable navbar
ROM
https://download.lineageos.org/cherry
Bugs
Nfc
Are you maintaining official builds of lineage for G7? Does this mean that we'll be getting updates?
Enviado desde mi Moto G4 Plus mediante Tapatalk
can i flash it to g7-l11 its on android 6.0.1 and i unlocked the bootloader and install twrp 3.0.0 and root with magisk
Can you please reupload Adaptation zip and navbar somewhere, where registration is not required?
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
luistro said:
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
Click to expand...
Click to collapse
One question bro... Does the rom support F2FS?
Sent from my Moto G4 Plus using Tapatalk
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
no problema here
can you plz redownload the navbar enabling ?
can i flash it using twrp cause i have problem with philz
Folueadeux said:
can i flash it using twrp cause i have problem with philz
Click to expand...
Click to collapse
of course
GessaNNN said:
of course
Click to expand...
Click to collapse
well actually, as op mentioned it works with philz only.
i tried installing with twrp, it failed and the error message was something like this rom is not compatible with your device.
then i tried the recovery op linked, worked a charm.
mhanp said:
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
Click to expand...
Click to collapse
Hi.first register on htcmania to download files and install rom and other tools and gapp and clean cach/delvik and restart...with philz recovery...
Excuseme my english not good..
Personally, I inject an install script made by me in which there's G760-L01 as compatible device everytime I download a new nightly, then it flashes with TWRP without problems.
updated firts post
Can someone help me with an issue i have?
my headphone jack stopped working and the only way it works again is with an app called SoundAbout but i'm very tired of switching modes everytime..
is my headphone jack damaged or is it the system not correctly routing the sounds?
I've flashed many ROMs and still no fix, have to use this stupid app please help!
Hello, I was trying to install this custom rom from TWRP 2.8.7.0 but when i try to flash this file i get the following error
E3004: This package is for device : c8817d,g620s,C8817D,C8817E,G621-TL00,G620S-UL00,G620-L01,Che1-CL20,Che1-L04:
this device is .
Click to expand...
Click to collapse
along with the following error messages (that i think they are related to twrp):
E: unknown command [log]
E:Error executing updater binary in zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Error flashing zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Click to expand...
Click to collapse
I don't have that much skills in rom flashing for android (I've only flashed almost successfully another rom for a lg g7-01), so can someone please help me with this?
Thanks in advance, Spinoni31.
Edit: I decided to switch to philz and it worked. The only things that don't seem to work are the NFC, and with it, my flip cover. If soemone can help me on this matter, i would really appreciate it. Thaks, Spinoni31
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Vodes said:
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Click to expand...
Click to collapse
Magisk link please :highfive:
Alanryav said:
Magisk link please :highfive:
Click to expand...
Click to collapse
Works perfectly fine with the official Magiskv14.0.zip
miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version
LANGUAGES: CHINESE / ENGLISH
I have it installed a day ago and at the moment it's going very well
Google installer v2.0 to install google play services
DOWNLOAD GOOGLE INSTALLER: https://www55.zippyshare.com/v/PNflCoDB/file.html
DOWNLOAD miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version: https://bigota.d.miui.com/8.6.1/miui_MINote2_8.6.1_b364d59a57_8.0.zip
REGARDS
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
any screen shots, how performs, any major bugs, overall experience.
FontesR said:
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
Click to expand...
Click to collapse
Sipi1302 said:
any screen shots, how performs, any major bugs, overall experience.
Click to expand...
Click to collapse
Been using it for like 2-3 hours,working pretty solid till now without encountering any bug. Battery is a little off compared to xiaomi.eu but I guess maybe because it is the first charge cycle. I haven't done any gaming yet,so not sure about the heating situation. Camera also works fine.
so in short,Yes it is usable as a daily driver.
Based on the file name it's still Oreo 8.0 based right?
Pantherx12 said:
Based on the file name it's still Oreo 8.0 based right?
Click to expand...
Click to collapse
Yes......
Is OTA available if I do not have a beta account?
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Naxxÿ said:
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Click to expand...
Click to collapse
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
vcx77 said:
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
Click to expand...
Click to collapse
Thanks but I'm on lineage 15.1 atm so I guess I only need the wipes [emoji6]
Sent from my MI Note 2 using Tapatalk
After two days with it, no failure and smooth operation, very good battery and the perfect camera, no problem with any application, routed with magisk-v16.4 beta without problems
Is there a new bokeh mode in the camera?
mindenfrak said:
Is there a new bokeh mode in the camera?
Click to expand...
Click to collapse
No.
That's for phones that support bokeh mode by default.
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Oh btw you don't need any Google installer APK you can just download the installer from the included Mi app store.
I will test out the rom today but I think I will restore my Lineage backup till the EU version is out....... the rom is great but there is way to much Chinese bloatware [emoji6]
Sent from my FDR-A03L using Tapatalk
Naxxÿ said:
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Click to expand...
Click to collapse
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
To me this official MIUI does not overwrite me the twrp
This rom encrypted and
erased my phone?
vcx77 said:
To me this official MIUI does not overwrite me the twrp
Click to expand...
Click to collapse
Interesting haha . Normally it should've flashed you the MI Recovery. Are you using the official TWRP?
maxraf21 said:
This rom encrypted and
erased my phone?
Click to expand...
Click to collapse
That is what official MIUI does ...
Always have a backup of your stuff not in the phone.
I do not use the official twrp, I use this https://forum.xda-developers.com/mi-note-2/development/twrpscorpio3-2-1-1tools-6blue-t3798956
So that there are no problems if you are in MIUI make a backup and before putting the rom deactivate from the mobile the device search and the account of xiaomi
once done reboot in twrp and make full wipes internal memory included and format data (if it gives montage error restart twrp again and perform again full wipes and format data) restart in twrp again and install, should not give you any problem with encryption
I do it like that and have never given me problems
and I do not overwrite the twrp either
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
Yeh might be but i never installed official MIUI ROMs before this one. Anyway took me 30 sec to hook up ADB and then Fastboot flash TWRP back. I rooted with Magisk and now all is perfect might even stay on this if i can tweak a few things to my liking.