Related
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
frenksisco said:
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
Click to expand...
Click to collapse
wifi is defend by your kernel install.. try use another kernel like cm10 or cm11 and make full wipe n install your rom again.. or switch to another kernel and rom..
When I installed the cm-9.0.0 I used its kernel and I did the same with the 9.1 and the 10 ... did not work ..
But maybe I did not understand. You say, for example, if I install the 9.1 should I try Kernell of 10? Does it make sense?
Please........ :crying:
Does WiFi work on Stock ICS 0.587 firmware ?
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
frenksisco said:
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
Click to expand...
Click to collapse
i think you ALLWAYS forget to flah the needed kernel. (& allways have this old GB kernel) so only wifi works with this.
you should make sure you following the install EXACTLY.
also cm 9.1 is old like hell. this is also no stable release. at least i wouldnt call it like that.
Look for LX (Legacy xperia) which provides cm10.1 , 10.1 (jb) & 11 (kitkat) this is far more stable. also many bugs fixed there.
cm 9(.1) is abdonned long time
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
frenksisco said:
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
Click to expand...
Click to collapse
ok good luck this time all works incl. wifi (should work 100% if doing all right)
i think the best is to test a rom 1st so you can say how it fits your usage . just a few tips:
-use minimal gapps after flashing rom
-LX 10.1 has a release candidatefrom march this year its a pretty stable daily driver. dont use the 10.2 release theres nothing better..
-maybe also you can test cm11 if want, but keep in mind 19/3 is the last PMEM build which is based on old kernel, will probably deliver the stablest experience. IMO the latest release is also very good but this contains some bug like the ANDROID_OS wakeclock (need power on phone on charger to avoid this) & its still in development (so its more for dev users)
for the buglist:
CM10.1:
- maps flickering its true but fixed in CM11
- wifi gets drops sometimes .. but it work at all
- camera is not good quality/buggy bcuz of driver lacks (also no 720p video)
CM11:
- sometimes wifi a lil bit buggy but its minimal. works like a charm for me
- 720p video is working here
BOTH:
-sometimes bluetooth battery drain after using it (need reboot to fix) i not face this is issue when i send something to friend.... (works normal..)
- NO FM radio, HDMI port will not work (if you have one) & ANT+ (no drivers)
good luck for you
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
frenksisco said:
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
Click to expand...
Click to collapse
np bro im happy you have now good rom & working wifi
just 1 thing if you use the latest version (02/07) it has a bug that you get android os battery drain. you can solve this by:
-power off phone
-plug in into charger & wait till you see the battery logo
-power on . done
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
frenksisco said:
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
Click to expand...
Click to collapse
There's a Q&A section for that ROM. Anyway, long boot time should be fixed in the upcoming release. The simplest way to fix disappearing icons problem is to install another launcher. Hope I've helped.
DO NOT FLASH THIS ON A TOUCHWIZ ROM. AOSP BASED ONLY
This is a custom GApps package I created to work with x86 devices (namely, our tab) as the normal GApps packages available are arm-only. (and no, to those who would ask, it's not as simple as downloading PA-GApps and swapping the update binary. The actual files therein are NOT x86 compatible, namely, the libs.)
UPDATE 1: With the release of 4.4. for the P5210, I am pleased to announce that this is now a full, complete, stable GApps package
It contains everything found in the PA-GApps stock zip plus:
-Hackers keyboard
-Root browser
-Xperia home
note that Hacker's keyboard and Xperia home are just there in case google keyboard / google home don't work out of the box. I don't anticipate any problems, but just to be sure. After some feedback / testing i'll remove these if people want. Root browser however is here to stay.
UPDATE 2:
As of the 20140823 build, this is now a UNIVERSAL x86 GApps package, meaning it will work on ANY x86 device running 4.4.x with zero tinkering to the zip. I did this by using a slightly modified pa-gapps updater-script coupled with an x86 update-binary.
UPDATE 3:
The 20140826 build is mostly bug fixes. The updater-script in the 20140823 build was broken. This is now fixed. Google + was broken. This is also fixed.
Google keyboard was broken. This too, is now fixed.
Tested this build myself. All is well.
For those who want a ROM to try this with, head over to @moonbutt74 's thread "odds, ends tests". He posted a successful 4.4.4 build from a few days ago on i think the 4th or 5th post (though it is by NO MEANS dd ready. We're working on it)
DOWNLOAD LINK IS BELOW.
If you want to use this for any reason other than personal use, ask me first, unless you just want to include a link on your ROM thread. If you do want to include a link in your ROM thread, link to this thread, not the download link below.
Download link:FrankenGApps-x86-20140826
old builds:
20140823 build:
FrankenGApps-x86-20140823.zip
The updater script in this build is broken. On top of that, if you fix it yourself, google + and google keyboard are borked.
20140814 build:
FrankenGApps-x86-20140814.zip
This build only works with the tab 3 10.1.
Old legacy hackey build:
FrankenGApps-x86-20140813.zip
there is absolutely no reason to flash the 20140813 build over newer builds. The 20140813 build is an unstable / hackey 4.2 gapps port, I'm just posting it for reference purposes. Naturally this build is unsupported. Please download the new build(s) from OP.
if i flash the build of 14th then i stuck on samsung boot logo. firmware was stock rooted deodexed 4.4.2. i have tryed it twice but always stuck on boot logo.
evilspawnas said:
if i flash the build of 14th then i stuck on samsung boot logo. firmware was stock rooted deodexed 4.4.2. i have tryed it twice but always stuck on boot logo.
Click to expand...
Click to collapse
I was sameway, so I just downloaded the update from "sammobile" installed it and used " super Su from chailfire to get root also used root explore to take out the apps I did not need.
@evilspawnas
@ghforlife
Why did you flash this on a touchwiz rom?
This zip is meant for aosp based ROMs like cm11. (I tested this package on @moonbutt74's wip cm11 build, works like a charm)
Besides, TW Roms have GApps built in
Restl3ss said:
@evilspawnas
@ghforlife
Why did you flash this on a touchwiz rom?
This zip is meant for aosp based ROMs like cm11. (I tested this package on @moonbutt74's wip cm11 build, works like a charm)
Besides, TW Roms have GApps built in
Click to expand...
Click to collapse
Oh, sorry, but all the other devices have cm 11, it´s like my normal behaviour to flash gapps... shame on me
Just updated to 20140823.
As of now, this GApps package is universally compatible with all x86 devices running 4.4.x. Zero tinkering to the zip necessary.
Just updated to 20140826. This build fixes updater-script, google keyboard, and google +. Read "update 3" in OP for more info.
Nice
Another stone in building our road to CM11. Thanks.
I know many will used this update.
To be honest, I am forced to used the market, but try to stay away from C I A applications. I am sorry did I say C I A. My apologies it is the Alzheimer, I mean Google.
( Central Intelligent in Android)
so how would one go about installing this on a dell xps12 running intels official haswell build of kitkat?
(https://01.org/android-ia/downloads/android-4.4.2r1-ia0)
Manually place the files with root explorer?
thanks
i love your rom man..been running pimpdroid since day 1 of this tablet...this is the only kitkat rom for this device on kitkat..im bout to try your modified gapps ...im not near as a advanced user than you..and i dont really understand some of the things you talk about..but im gonna go ahead and ask...what are the advantges of installing this gapps package opposed to keeping the ones flashed with your pimpdroid rom?....sorry if this is a dume question...this is first ive seen of a modified gapps package...can u be more specfic bout what would be diff?...or is it jus a more like internal thing..and i wont really notice nothing diff being a nebie and all i guess..dont really consider myself such a nebie..but compared to dev like yourself..def..am..
lucky_515 said:
i love your rom man..been running pimpdroid since day 1 of this tablet...this is the only kitkat rom for this device on kitkat..im bout to try your modified gapps ...im not near as a advanced user than you..and i dont really understand some of the things you talk about..but im gonna go ahead and ask...what are the advantges of installing this gapps package opposed to keeping the ones flashed with your pimpdroid rom?....sorry if this is a dume question...this is first ive seen of a modified gapps package...can u be more specfic bout what would be diff?...or is it jus a more like internal thing..and i wont really notice nothing diff being a nebie and all i guess..dont really consider myself such a nebie..but compared to dev like yourself..def..am..
Click to expand...
Click to collapse
Hey brother don't dare to flash it.... It's not for a Touchwiz rom like pimpdroid or Cagrom., It's for AOSP rom like Omni rom , AOKP , CM11 , AICP etc....
Sent from my GT-S6802 using XDA Free mobile app
Thanks for the gapps, working on my 3830 AOSP rom.
Restl3ss said:
DO NOT FLASH THIS ON A TOUCHWIZ ROM. AOSP BASED ONLY
This is a custom GApps package I created to work with x86 devices (namely, our tab) as the normal GApps packages available are arm-only. (and no, to those who would ask, it's not as simple as downloading PA-GApps and swapping the update binary. The actual files therein are NOT x86 compatible, namely, the libs.)
UPDATE 1: With the release of 4.4. for the P5210, I am pleased to announce that this is now a full, complete, stable GApps package
It contains everything found in the PA-GApps stock zip plus:
-Hackers keyboard
-Root browser
-Xperia home
note that Hacker's keyboard and Xperia home are just there in case google keyboard / google home don't work out of the box. I don't anticipate any problems, but just to be sure. After some feedback / testing i'll remove these if people want. Root browser however is here to stay.
UPDATE 2:
As of the 20140823 build, this is now a UNIVERSAL x86 GApps package, meaning it will work on ANY x86 device running 4.4.x with zero tinkering to the zip. I did this by using a slightly modified pa-gapps updater-script coupled with an x86 update-binary.
UPDATE 3:
The 20140826 build is mostly bug fixes. The updater-script in the 20140823 build was broken. This is now fixed. Google + was broken. This is also fixed.
Google keyboard was broken. This too, is now fixed.
Tested this build myself. All is well.
For those who want a ROM to try this with, head over to @moonbutt74 's thread "odds, ends tests". He posted a successful 4.4.4 build from a few days ago on i think the 4th or 5th post (though it is by NO MEANS dd ready. We're working on it)
DOWNLOAD LINK IS BELOW.
If you want to use this for any reason other than personal use, ask me first, unless you just want to include a link on your ROM thread. If you do want to include a link in your ROM thread, link to this thread, not the download link below.
Download link:FrankenGApps-x86-20140826
Click to expand...
Click to collapse
Questions:
1. Does this work with LineageOS 14.1 [Android 7.1.2]
2. Where are the instructions on how to install this?
SerjSev said:
Questions:
1. Does this work with LineageOS 14.1 [Android 7.1.2]
2. Where are the instructions on how to install this?
Click to expand...
Click to collapse
These gapps are 6 years old and for older versions of android. Go to opengapps.org for android 7.1.2 based gapps.
And also why do you need instructions? Same as all gapps just flash the zip after flashing the rom
garylawwd said:
These gapps are 6 years old and for older versions of android. Go to opengapps.org for android 7.1.2 based gapps.
And also why do you need instructions? Same as all gapps just flash the zip after flashing the rom
Click to expand...
Click to collapse
Owh Hi, okay ?
Never thought someone would answer, the Tab 3 10.1 page on XDA is sadly dead, other models too for the Tab 3. And i still have the device! Ha. Did you like get notified when i replied to this thread that you checked? Because i was surprised, never thought again someone would answer to this old page part of XDA! I would love to talk with you and etc, cause im kinda lonely here lol, i know the device is old but old is gold! People can make many mods for it! Ill wait for your reply
SerjSev said:
Owh Hi, okay ?
Never thought someone would answer, the Tab 3 10.1 page on XDA is sadly dead, other models too for the Tab 3. And i still have the device! Ha. Did you like get notified when i replied to this thread that you checked? Because i was surprised, never thought again someone would answer to this old page part of XDA! I would love to talk with you and etc, cause im kinda lonely here lol, i know the device is old but old is gold! People can make many mods for it! Ill wait for your reply
Click to expand...
Click to collapse
I have a tab 3 10.1 WiFi so if anything pops up around these threads I always have a look.
The tablet is still working fine for me without any gapps on it as I've found gapps are extremely heavy on such an old tablet. Instead I opted for a microg installation and it works perfectly (even being able to play games like bullet force or fwd assault) but i mostly use it for reading and cooking and that kind of stuff which it is perfect for.
garylawwd said:
I have a tab 3 10.1 WiFi so if anything pops up around these threads I always have a look.
The tablet is still working fine for me without any gapps on it as I've found gapps are extremely heavy on such an old tablet. Instead I opted for a microg installation and it works perfectly (even being able to play games like bullet force or fwd assault) but i mostly use it for reading and cooking and that kind of stuff which it is perfect for.
Click to expand...
Click to collapse
Owhh, i see. I put this rom on my tab: https://forum.xda-developers.com/galaxy-tab-3/development-10/rom-lineageos-14-1-t3587761
It does lag sometimes, but i removed some of the GApps it came with. I mean, the second i removed playstore some other Google apps stopped working so i had to delete them too. It's a bit better, but i dont play games on it, it's still laggy i should've chosen another ROM but i guess this is fine. Which ones are you using? If you want we can talk in discord, or here if you want, which ever way you fele comfortable. I can share the apps i have and etc, since we have the same tablet, finally i found someone in 2020 having the same device as i have! Ha. I'm still here, so if you reply and i wont answer, i will answer later, i have schedule to follow that's why
Ill wait for your response, anywhere, if you want dm me here, chat in this thread or check my discord, send a friend request and tell me here ur name so I'd accept it. You can also find me in the XDA discord server.
garylawwd said:
I have a tab 3 10.1 WiFi so if anything pops up around these threads I always have a look.
The tablet is still working fine for me without any gapps on it as I've found gapps are extremely heavy on such an old tablet. Instead I opted for a microg installation and it works perfectly (even being able to play games like bullet force or fwd assault) but i mostly use it for reading and cooking and that kind of stuff which it is perfect for.
Click to expand...
Click to collapse
Hey, where have you been?
I drop using my Wave long ago, even tho in the meanwhile I used it to watch some spanish streaming tv with the tv output on a crt tv, but now I want to change its OS with a nice version of android, to have a backup of my main android phone (a Vodafone Smart Mini/875 with jellybean 4.1.1) that's actually giving me some troubles.
So now I'm a bit lost, I already found and read this thread: http://forum.xda-developers.com/sam...t-android-roms-samsung-wave-gt-s8500-t2842566 where there's some kind of a list of the actual custom portings, but not all states the android version, besides it seems to not include the 5.* lollipop versions.
What I want to install is a complete and hopefully stable version, it doesn't need to be lollipop/5.*, expecially if it doesn't give any benefit except to being the newest/up-to-date but it eats more ram memory (that with only 512 Mb is an issue, the 875 have the same amount and with jb eats up more or less 400Mb~), and I need (almost) every feature available on Bada being present on Android too (like: tv output, camera button, bluetooth, wifi, 2g/3g/3.5g data/voice/txt, etc.).
I'm just asking to point me (/suggesting) to the right direction (thread/release) to the best or better options available for me.
Thank you in advance!
Man , i will answer you but you better do what i say , cause it is the only truth
Badadroid project start with a couple of an amazing developers , those formed the porting team
the first ROM to be ported to wave was developed by Rebellos and Volk204
after that Volk204 took the project by himself
so:
Any ROMs by volk204 are worth using
Any other ROM you see are just kang/copie of his work by some amateurs , and are without actual support (not if Volk204 doesn't fix the problem himself )
I recommend you using OMni rom 4.4.4 by volk204 and flash RIL fix from this post
volk204 said:
RIL update 20.12.2014 https://yadi.sk/d/kvYUiq6QdWSdD
- SMS fixes
just flash it via TWRP
Click to expand...
Click to collapse
Omni Lollipop are not for daily use , major problem with it ; is the low free memory , apps will just close , you can't use (for me Endomondo + Music ) it will work to certain point ; than Android will kill one of the 2 apps
Fellow my Guide , it has most of the thing you need
The complete Optimization Guide for Omni Rom (4.4 and Lollipop)
And in earlier this year an another Recognized developer here on XDA "Alberto96" got an interest in developing ROM for wave1/wave2
he released a nice ROM , and now the links are dead , but he is BACK and he is working on his trademark ROM "GearCM" for our wave and from what i see in the his Github , it gonna be awesome
So :
Best ROM now (actual one ROM exist , it is not like i will tell something new ) [ROM][WIP][NAND] Omni 4.4 - 11.12.2014 By volk204 (don not install Gapps)
Best ROM ( Future release ) GearCM by alberto96 fellow his GIthub https://github.com/Alberto96?tab=activity
so what are the other ROMs released by Rebellos and Volk204:
it been like this since the very earlier day of Badadroid
Bugs fix go along with ROM updates , they didn't work on the same android version , every couple and there a major bug fix come with the Cyanogen source update
So anything less than Omni 4.4 (11.12.2014) has more bugs .
i must mention
Senior member Hero355 he did work on a promising ROM (Smartkat) by he got busy with life and let the project unfinished . But his Bada 2.0 Turko Rom is just Great
Senior member BenzoX he did work on Dual boot (Bada/android) and Dual android rom boot, he did work on nand and sd ROM (he is also got busy and let some things not fixed ) s
some people are using this unfinished Alpha projects , what do you expect from their ROMs :crying:
there is nothing else you need to know
Kind regards :angel:
So now. With Liondroid, Omni 6.0, GearCM and omni 4.4.4 which one can be considered for a daily use?
In my opinion, if GearCM had a better communication management it would be the best.
if you do not mind the theme in Russian, then take a look http://www.badapps.ru/6081-ledenec-ot-djkoloda-dlya-samsung-wave-8500-i-853008242015.html
Looks promising. At the moment I'm trying liondroid (very smooth but I need further tests) but I keep your link for later.
Maybe you could see with the creator to put his version on xda?
What should I do, if after installing some gapps (not the ones from here) the phone goes with a black screen after starting omni? it only shows the notification bar
Dsebas91 said:
What should I do, if after installing some gapps (not the ones from here) the phone goes with a black screen after starting omni? it only shows the notification bar
Click to expand...
Click to collapse
What ROM you installed ?
Union_Jack said:
What ROM you installed ?
Click to expand...
Click to collapse
Omni 4.4 by volk204, but I figured it out, wipe some data in recovery and I could reflash the ROM again and flash other gapps.. but now, I'm having trouble with the Google play services last update , it's laggy.. I'm trying to optimize the rom with the guide by @ice_ice where there's a section to put the Google play services like it wasn't never installed...but I'm cannot find the option WAKEUP with the 3C Tools app to disable it, I can't disable other services of Google play services becase the phone it's so slow that it shuts down after a while and I can't make it...
Do you think that the YouTube App and whatsapp will work fine if I uninstall the updates? I mean, That would be easier to make, because the updates are killing the ram... It's my dad's phone, so he just need whatsapp, something to check the Facebook (I installed the lite version), YouTube and Something to open Gmail (any reasonable lite app for Gmail?)
Dsebas91 , I use the 4.4.4 by djkoloda without installing, gapps .
All the apps I downloaded in *.apk files.
Recommend YouTube_v4.1.47.apk .
Gmail I checked by logging into account from a standard browser.
Sync contacts with Google through a program of CardDav-Sync.
Time Appropriate Greetings fellas!!!
VIBE_PURE is based on the latest VIBEUI ROW Indian release for K3 Note by Lenovo and so it has the bugs that will be present in that release. This rom is developed with the idea to have the best of both words which is the simplicity of AOSP and the features of lenovo tied to K3 note, its a learning process for me and those who wish to test it or modify it are welcome to do it but please credit me and people in my credit section and also please comment in the thread what u have done to correct the bug because in the end all we need is Fully functioning ROM and knowledge of how to do it....
Known Bugs
Whatever the bugs listed for the latest ROW Release.
this is a stable release....rooted, busybox, gapps, xposed and few MultiLanguage...
Has VR mode and Dolby Atmos
With VIBEUI Dev 1629 Kernel...
Sticked to ROW Modem...
Thermal Files from Leishui 1629 Rom
Has Android Nify Xposed module installed which can be enabled in Xposed Installer
MiXplorer and Noozy Music Player Preinstalled.
WARNING TEST THIS AT UR OWN RISK....BACKUP EVERYTHING U HAVE BEFORE DOING ANYTHING...
Boot into TWRP recovery
Wipe Dalvik Cache, Cache, System and Data
Flash the ROM
Reboot....
POST 1 Intro
POST 2 Changelog
ROM DOWNLOAD
VIBE PURE Stable 1
SCREENSHOTS
Created : 26/07/2016
Last Release : 26/07/2016
State : STABLE
Credits :
Lenovo for phone and software, LeiShui, chainfire for supersu, osm0sis for busybox installation finally SuperR for SuperR's Kitchen with which the rom is made.
CHANGELOG
Vibe Pure Stable 1 - Initial Release
Downloading now. Will flash and update soon!
EDIT : I am using the Stable 1 version! Fantastic ROM. Completely preserves the functionality of Lenovo but with an clean front. Hats off. Will test battery life and update soon.
Thankyou pvkiniyan95 for the ROM. I installed on my Lenovo k3 Note K50a40.
UI was butter smooth and no issues regarding gapps FC's. Initial boot took 30mins then removed battery and formatted through twrp 2.8 ,then rebooted. Worked fine. Need more time to check all features. But my experience with this ROM gave pleasant and very smooth. Battery stable. Used hotstar live TV streaming for 30mins consumed around 2%battery. Amazing power stability.
There's a crash when trying to set a locally stored ringtone through Sound settings. Happens all the time. Any workarounds for that ?
I really like this rom but for some reason it cannot find internal sd card. The sdcard0 is missing.
When I connect pen drive via otg it's show POP-UP shows "unfortunately, system ui stoped"
Thx for this room to developers and xda team for this room.flashed today working very well.
It's not the problem
vaibhavmane4 said:
When I connect pen drive via otg it's show POP-UP shows "unfortunately, system ui stoped"
Click to expand...
Click to collapse
It's not the problem with this room it is the problem with mi file manager delete it and get another one like es file manager.
working twrp ? for all custom roms ?
Can some provide the download link. Above link is not working
Hi everyone, i have been trying lately to improve my xperia x roms and tried a few of them but none seemed to work properly, sometimes random crashing or battery not charging ...
i was hoping you could help me chose a stable rom for everyday use and gaming (mostly emulation).
thank you in advance !!
I only tried "Unofficial LineageOS 16.0 for Xperia X" and "Unofficial AOSP9r46[X-X Dualsim-X Compact]". AOSP has less issues thanks to more modern kernel/drivers & you can use GCam, but of course it lacks all the comfortable things any LineageOS ROM comes with. The LineageOS has a black screen issue which occurs relatively seldom, but still regularly. It happens when you open an app, most often when switching fast between apps like when sharing a file with an app. You then have to kill that app which has gone black, but very seldom you need to reboot since the black screen is so that you even can't see the Android touchscreen buttons anymore to click back/previous app/homescreen.
I you install AOSP make sure to install the version you'll find deep in the thread and the updated boot.img. The folders on my harddrive are named "20200422 build with 4.9.219 kernel update" and "Updated boot.img with 4.9.230 kernel" which contain the files "AOSP-9-F5121-20200422-4.9.219brcmfmac.zip" and "20201003-aosp9-bootimage-4.9.230-f5121.zip" respectively and I noted down the following in a txt-file:
Edit : new boot.img with 4.9.230 kernel should be flashed instead of the one in full ROM archive, should fix some of the intempestive reboots (CPU frequency fix).
Only quickly tested on Kugo. Have the old boot.img at hand in case of problem.
Click to expand...
Click to collapse
TWRP I'm using is TWRP v3.3.1 for Xperia X (twrp-3.3.1-0-suzu.img).
Btw I never had charging issues, so make sure it's not a dirt/dust or hardware issue (worn out battery can also cause stability issues.
LineageOS 16 is the most stable non-stock rom
Spardantex said:
LineageOS 16 is the most stable non-stock rom
Click to expand...
Click to collapse
Hello ! Do you know how to install MicroG on Sony Xperia X suzu with Lineage Os 16 installed ( without Gapps ) ?