Hey guys nougat is available to download for axon 7.
A2017U only, of course...
(so far)
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
I remember lots of people in the other nougat threads that ripped on ZTE saying there's no way it would be ready.. a little late, but not too late. Good job ZTE.
Takenover83 said:
Just restored to stock form LeanageOS to give it a spin. Downloading now. Although I saw it on Reddit first ><
Click to expand...
Click to collapse
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
lafester said:
Just did the same. Flashed full b29, downloaded update and it failed.
Factory reset, now waiting for download again.
Click to expand...
Click to collapse
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Nice. almost there myself.
Takenover83 said:
I had the same problem. On my 2nd go around as well. First time I restored B29 from TWRP. After the failed update. I reflashed B29 via the official recovery, and then re-downloaded the Nougate update again. Will update.
Edit: Success.
Click to expand...
Click to collapse
Do you recommend to unlock bootloader before upgrading?
jorch_oc said:
Do you recommend to unlock bootloader before upgrading?
Click to expand...
Click to collapse
Don't know yet. A beta user said all they had to do was go into fastboot and unlock... Hopefully the release build is the same.
So... either wait and see, unlock now, or go for it and be the first to try.
Does nougat have the dreaded power management?
Just tested Daydream a bit. The power button is no longer a problem
But I can't find any options to adjust blur or flicker like in LeanageOS. Also, I still get quiet a bit of drifting to the right. Was hoping Official would help with that, as other fixes/solutions had minimal impact for me.
borijess said:
Does nougat have the dreaded power management?
Click to expand...
Click to collapse
It now has 3 options
Always remind to clean
Auto-clean without reminding
Do not clean
Fastboot doesn't appear to accept any commands unfortunately.
Is this still MiFavour 4.0 or maybe a new version?
4.2
lafester said:
Fastboot doesn't appear to accept any commands unfortunately.
Click to expand...
Click to collapse
Yep, was like grrr when I went to flash twrp.
Takenover83 said:
Yep, was like grrr when I went to flash twrp.
Click to expand...
Click to collapse
So what's the easiest method to install? Trying tennear's tool but I keep getting failed to open recovery.bin.
It came OTA
Could somebody pls pull the ota link?
I can confirm. I am downloading right now. I will try to pull the OTA when it has finished.
Related
I've unlocked my bootloader, rooted and installed CWM custom recovery. Not surprisingly the Sense 6 update will download but it won't install. I tried to flash it manually with CWM but that won't work either. Again, no surprise.
Is there a workaround that I can use to install the Sense 6 update?
appro77 said:
I've unlocked my bootloader, rooted and installed CWM custom recovery. Not surprisingly the Sense 6 update will download but it won't install. I tried to flash it manually with CWM but that won't work either. Again, no surprise.
Is there a workaround that I can use to install the Sense 6 update?
Click to expand...
Click to collapse
Yes, you need the stock recovery not custom recovery to install the ota plus stock rom installed.
jerrycycle said:
Yes, you need the stock recovery not custom recovery to install the ota plus stock rom installed.
Click to expand...
Click to collapse
Ok, I flashed stock recovery and the update looked like it was going to install but it failed about a third of the way through and gave me a red triangle. I rebooted and fortunately the phone is still working. I tried installing the update a second time with the same result. Any ideas?
appro77 said:
Ok, I flashed stock recovery and the update looked like it was going to install but it failed about a third of the way through and gave me a red triangle. I rebooted and fortunately the phone is still working. I tried installing the update a second time with the same result. Any ideas?
Click to expand...
Click to collapse
You have to have a pure stock rom. You may have to nandroid a stock or RUU but you have to decide that, but it have to be stock not root or any system file edits. Sorry, missed the bootloader need to be locked.
jerrycycle said:
You have to have a pure stock rom. You may have to nandroid a stock or RUU but you have to decide that, but it have to be stock not root or any system file edits. Sorry, missed the bootloader need to be locked.
Click to expand...
Click to collapse
My rom is stock (Telstra Australia) but I've installed a few Xposed mods. If I do a factory reset I'm assuming that will take the rom back to stock. If I then remove root and relock the bootloader will I then be ok to flash the Sense 6 update?
Mate, I'm having same issue, Telstra Australia.
Check out his thread. I think you need to save three files that get wiped when you unlock bootloader. The update looks for them. I'm still trying to get it to work.
http://forum.xda-developers.com/showthread.php?t=2800140
Cjohn1200 said:
Mate, I'm having same issue, Telstra Australia.
Check out his thread. I think you need to save three files that get wiped when you unlock bootloader. The update looks for them. I'm still trying to get it to work.
http://forum.xda-developers.com/showthread.php?t=2800140
Click to expand...
Click to collapse
Thanks. I tried the 3 files thing and it didn't work for me probably because the bootloader was still unlocked. I got sick of dicking around with it and decided to try to get S-off which I'd been having trouble achieving with Hboot 2.49. Finally got S-off and then flashed this.... http://forum.xda-developers.com/showthread.php?p=53890999
Cheers.
appro77 said:
My rom is stock (Telstra Australia) but I've installed a few Xposed mods. If I do a factory reset I'm assuming that will take the rom back to stock. If I then remove root and relock the bootloader will I then be ok to flash the Sense 6 update?
Click to expand...
Click to collapse
appro77 said:
Thanks. I tried the 3 files thing and it didn't work for me probably because the bootloader was still unlocked. I got sick of dicking around with it and decided to try to get S-off which I'd been having trouble achieving with Hboot 2.49. Finally got S-off and then flashed this.... http://forum.xda-developers.com/showthread.php?p=53890999
Cheers.
Click to expand...
Click to collapse
Which method did you use to gain s-off? I couldn't get it to work.
Cjohn1200 said:
Which method did you use to gain s-off? I couldn't get it to work.
Click to expand...
Click to collapse
Nothing was working for me and I'd almost given up but I was pointed to this.... http://firewater-soff.com/instructions/
I was already rooted but for some reason the first method wouldn't work for me. ADB is very new to me so I may have done something wrong even though I tried it a couple of times. I used the second method but didn't use temproot cause I figured as I was already rooted I didn't need it. When I used the commands in the second method S-off was achieved.
The rom I mentioned above looks really good btw.
Cjohn1200 said:
Which method did you use to gain s-off? I couldn't get it to work.
Click to expand...
Click to collapse
appro77 said:
Nothing was working for me and I'd almost given up but I was pointed to this.... http://firewater-soff.com/instructions/
I was already rooted but for some reason the first method wouldn't work for me. ADB is very new to me so I may have done something wrong even though I tried it a couple of times. I used the second method but didn't use temproot cause I figured as I was already rooted I didn't need it. When I used the commands in the second method S-off was achieved.
The rom I mentioned above looks really good btw.
Click to expand...
Click to collapse
Yeah it does look pretty slick. Wasn't sure about the large icons through. I watched a review on youtube. Looked a little strange...
Cjohn1200 said:
Yeah it does look pretty slick. Wasn't sure about the large icons through. I watched a review on youtube. Looked a little strange...
Click to expand...
Click to collapse
Not sure what you are referring to there. I didn't see anything overly large. Was that on the stock launcher? I'm using Apex.
When the OTA update fails and you get the red triangle, have you tried holding the vol up button then pushing the power button?
This should take you to stock recovery and you can see why the update failed...
Might give you a point to work from.
Cjohn1200 said:
When the OTA update fails and you get the red triangle, have you tried holding the vol up button then pushing the power button?
This should take you to stock recovery and you can see why the update failed...
Might give you a point to work from.
Click to expand...
Click to collapse
No I didn't do that. I'm on a custom recovery and custom rom now though.
I'm all back to stock with the three files saved. Just waiting for the OTA update to download now.
I'll let you know if it works.
So what's the sense 6 camera app like? I have never really been happy with the camera on the max.
Cjohn1200 said:
So what's the sense 6 camera app like? I have never really been happy with the camera on the max.
Click to expand...
Click to collapse
I haven't had a really good look at it but I don't like the fact that you have to tap a button before you choose video. On the old app both camera and video were one tap away. Now if you aren't in video already it's 2 taps.
appro77 said:
No I didn't do that. I'm on a custom recovery and custom rom now though.
Click to expand...
Click to collapse
I ended up getting this to work....
When you save the three files that are missing with a root file manager, you have to save them to \data\preload NOT system\data\preload
Worked a treat after I did this:good:
How did you get firewater to work?
I keep getting a kernel error. It says that my kernel has a anti firewater patch. Very frustrating i just want to be able to lock my bootloader so my finger print scanner works properly again.
Cjohn1200 said:
I ended up getting this to work....
When you save the three files that are missing with a root file manager, you have to save them to \data\preload NOT system\data\preload
Worked a treat after I did this:good:
How did you get firewater to work?
I keep getting a kernel error. It says that my kernel has a anti firewater patch. Very frustrating i just want to be able to lock my bootloader so my finger print scanner works properly again.
Click to expand...
Click to collapse
That's interesting what you say about the 3 files. Now I know why it wouldn't work for me. Regarding Firewater I just followed the instructions in the link I posted earlier.
I've actually reverted to a Nandroid of my stock Sense 5.5 rom. I like it better than Sense 6.
Great deal
[emoji106]
Is there away around the password on first boot. I bought my op2 Second hand so I don't know the original pin
emilio242 said:
Is there away around the password on first boot. I bought my op2 Second hand so I don't know the original pin
Click to expand...
Click to collapse
Download this file: https://drive.google.com/file/d/0BzZGP6ljwL-XR1FnbG03dVVmOGM/view?usp=sharing
Then boot into fastboot mode and send the following commands
Code:
fastboot erase persist
fastboot flash persist persist.img
fastboot reboot
This is due to a password/fingerprint being active and is a security measure but the above steps will clear them.
Will v4a work on this rom?
phuongvl2016 said:
Will v4a work on this rom?
Click to expand...
Click to collapse
It already has Maxxaudio. V4A has not been tested so it may not work.
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
I can't download via Google drive. Could you possibly upload via AFH?
Abdur Desai said:
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
Click to expand...
Click to collapse
Yes these are full ROMs but unfortunately I do not plan to make incremental OTAs only full updates. This is for a few reasons but mainly that it's harder to maintain.
Xposed I have not personal had the chance to try yet but others have reported that it works fine
seangeezy12 said:
I can't download via Google drive. Could you possibly upload via AFH?
Click to expand...
Click to collapse
Uploading now. I am hoping to get a fix for audio tuner in place soon though.
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Bostrot said:
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Click to expand...
Click to collapse
Does it boot after that?
Bostrot said:
Thanks for your work. I installed it and after the "Android is starting..." is finished it ends in a loop and the Hydrogen logo starts again...
Click to expand...
Click to collapse
Has to be something strange to do with your environment or bad download. Did you do a full wipe (/system /data and /cache) prior to installing?
Kstarz said:
Has to be something strange to do with your environment or bad download. Did you do a full wipe (/system /data and /cache) prior to installing?
Click to expand...
Click to collapse
Yes a full wipe with TWRP. I downloaded it a few times. Also the files from the old post but it was the same. @seangeezy12 Yes it boots with the Android is starting loop
Dirty flashed the last version over a full blown H2os . boot just fine. One thing that took forever and with several reboots was updating google services. Other than that I like it a lot.
Abdur Desai said:
Awesome. These are full ROM's right? Incremental updates would be even better. Thanks for this.
Also, have you tried running Xposed on this, if so which version did you use.
Awesome to see Hydrogen OS getting some love.
Click to expand...
Click to collapse
Yes Xposed is working perfectly fine on this awesome ROM
I wanna download this. I've been itching for a new ROM but this Google drive won't let me download. Patiently waiting for the upload of AFH
seangeezy12 said:
I wanna download this. I've been itching for a new ROM but this Google drive won't let me download. Patiently waiting for the upload of AFH
Click to expand...
Click to collapse
Done check OP
Kstarz said:
Done check OP
Click to expand...
Click to collapse
Thank you kind sir. Will give my review after a day or 2 of running. I'm sure it's a dope ROM though
https://developers.google.com/android/nexus/images?hl=en
Wow nice !!!
Let's Rock!
Can't wait for pure nexus to update to N
Sent from my Nexus 6P using Tapatalk
YES!
Is it possible to flash the factory image using flashfire?
Im currently using this ROM (Stock+Nougat-NRD90M Debloated-Prerooted-Odex-Busybox-Fast & Stable).
Vegeta700 said:
Is it possible to flash the factory image using flashfire?
Im currently using this ROM (Stock+Nougat-NRD90M Debloated-Prerooted-Odex-Busybox-Fast & Stable).
Click to expand...
Click to collapse
I only flash via fastboot and when going between versions I'd personally want to do a fully clean flash. Mind you I reverted to MM after trying N for a couple days, but again, I'd never flash a full factory image via Flashfire.
Vegeta700 said:
Is it possible to flash the factory image using flashfire?
Im currently using this ROM (Stock+Nougat-NRD90M Debloated-Prerooted-Odex-Busybox-Fast & Stable).
Click to expand...
Click to collapse
Unless a lot of users have certified that flashing via dlash fire works, I would recommend a clean flash via fastboot. This way you are flashing the images the most direct way possible. Doing this will also reduce possible entry points for issues.
First person to find an .mbn file in the boot.img or bootloader.img gets SO much cred.
Oh my .. Time to flashing silently
Is there a list of apps that currently don't work (or do work) with 7.0? I'm trying to switch over but there's a couple core apps that I need to know will work fine.
kaslopis said:
Is there a list of apps that currently don't work (or do work) with 7.0? I'm trying to switch over but there's a couple core apps that I need to know will work fine.
Click to expand...
Click to collapse
There's a thread called "Android N: What doesnt work" here in general
david279 said:
There's a thread called "Android N: What doesnt work" here in general
Click to expand...
Click to collapse
Most of the apps on that list that I use did not have the stated issues... None of them did.. I'm not sure if that list is up to date.
You're welcome.
I just finished flashing back to 6.0.1 and getting everything set up.
Of course now it gets released...
E30Nova said:
You're welcome.
I just finished flashing back to 6.0.1 and getting everything set up.
Of course now it gets released...
Click to expand...
Click to collapse
You aren't alone. Went back a day ago myself.
Sent from my Nexus 6P using Tapatalk
From what I've seen, this version isn't all that superb. Being on 6 isn't so bad
I've honestly had zero issues with the factory image for N. I wiped everything and clean flashed the image flat. Once I restored all my apps (around 80), so far it seems very smooth. No issues with lag in either the system or the fingerprint scanner.
I keep getting an error about not being able to find systsem.img in its package.. In thought they fixed this in the flash all script in 5.0 for factory images?
Soured Lie said:
I keep getting an error about not being able to find systsem.img in its package.. In thought they fixed this in the flash all script in 5.0 for factory images?
Click to expand...
Click to collapse
Flash-all is still broken afaik, better flash the individual img`s in fastboot.
Hey y'all,
Sorry to bother here. I looked around but couldn't find anything. I'm running NRD90M on my phone. I install TWRP and I rooted my 6P + unlocked bootloader. However I just downloaded the full image on google NRD90U. I'd like to put back my phone to stock with this new image and be able to just keep it stock and receive OTA. Can someone help me out or giving me a link where there's a tutorial. I already downloaded Fastboot/ADB and installed my drivers.
PS: It's find if it wipes everything. I just want it clean.
Thanks!
StangATX
Just checked updates and there it was.
gaww said:
Just checked updates and there it was.
Click to expand...
Click to collapse
Installing now, I wonder what the exact changelog, wish they have more info with these updates
champ784 said:
Installing now, I wonder what the exact changelog, wish they have more info with these updates
Click to expand...
Click to collapse
Please post how things went - especially if you are rooted (?), as its easy to end up unrooted at times.
OTA is failing for me after unrooting. I also restored the latest restore.img from the relevant thread before I attempted to update.
Anyone with root able to get OTA installed?
NotATreoFan said:
OTA is failing for me after unrooting. I also restored the latest restore.img from the relevant thread before I attempted to update.
Anyone with root able to get OTA installed?
Click to expand...
Click to collapse
I have not updated, but it will continue after rebooting - is there any way to stop it ?
gaww said:
I have not updated, but it will continue after rebooting - is there any way to stop it ?
Click to expand...
Click to collapse
The update was already downloaded to my phone, but did not attempt to install until I started it manually.
NotATreoFan said:
The update was already downloaded to my phone, but did not attempt to install until I started it manually.
Click to expand...
Click to collapse
I am not so worried about rerooting if it is necessary, but am very worried about getting wiped. How did yours come out ?
gaww said:
I am not so worried about rerooting if it is necessary, but am very worried about getting wiped. How did yours come out ?
Click to expand...
Click to collapse
I'm all set. No wipe, and rooted again on 10.0.31.
NotATreoFan said:
I'm all set. No wipe, and rooted again on 10.0.31.
Click to expand...
Click to collapse
Did you have to unroot before updating ?
Never-mind had to unroot it would not work otherwise. But still wont finish - maybe because i may still have a different then stock kernel even though I unrooted.
gaww said:
Did you have to unroot before updating ?
Never-mind had to unroot it would not work otherwise. But still wont finish - maybe because i may still have a different then stock kernel even though I unrooted.
Click to expand...
Click to collapse
You need to unroot, and also make sure you have the reserve.img partition restored. If you unlocked the bootloader after the .27 OTA, reserve.img is deleted during unlock.
NotATreoFan said:
You need to unroot, and also make sure you have the reserve.img partition restored. If you unlocked the bootloader after the .27 OTA, reserve.img is deleted during unlock.
Click to expand...
Click to collapse
I had read something about that file earlier, but forgot about. I spent hours trying to get it updated to no avail. i will search, but wondered if you could show me the way to do that,
gaww said:
I had read something about that file earlier, but forgot about. I spent hours trying to get it updated to no avail. i will search, but wondered if you could show me the way to do that,
Click to expand...
Click to collapse
Go here: https://forum.xda-developers.com/7t...d1925-10-0-19-fastboot-rom-ota-fixer-t4040629
Download the newest package in the first post, and then download the updated userdata.img from this post: https://forum.xda-developers.com/showpost.php?p=82141557&postcount=117
NotATreoFan said:
Go here: https://forum.xda-developers.com/7t...d1925-10-0-19-fastboot-rom-ota-fixer-t4040629
Download the newest package in the first post, and then download the updated userdata.img from this post: https://forum.xda-developers.com/showpost.php?p=82141557&postcount=117
Click to expand...
Click to collapse
Will this cause a wipe ? If so, will wait for a bigger update.
I'm not currently rooted, so my results won't matter too much atm
gaww said:
Will this cause a wipe ? If so, will wait for a bigger update.
Click to expand...
Click to collapse
No. All data will be intact. You are not formatting or overwriting userdata.
NotATreoFan said:
No. All data will be intact. You are not formatting or overwriting userdata.
Click to expand...
Click to collapse
All I have to do is to not screw up, and after having been on Samsungs since S3, where most things were straight forward and relatively easy, there is a good chance I will.
Will be doing more reading - wish there was a guide like the unlocking and rooting of the US TMo guide thread.
gaww said:
All I have to do is to not screw up, and after having been on Samsungs since S3, where most things were straight forward and relatively easy, there is a good chance I will.
Will be doing more reading - wish there was a guide like the unlocking and rooting of the US TMo guide thread.
Click to expand...
Click to collapse
It's very simple, and the script does most of the work. All you have to do is hit Enter a few times, and let it run.
Back up your data to be safe, and worse case scenario, there is an MSM tool available that will restore the phone to stock.
NotATreoFan said:
It's very simple, and the script does most of the work. All you have to do is hit Enter a few times, and let it run.
Back up your data to be safe, and worse case scenario, there is an MSM tool available that will restore the phone to stock.
Click to expand...
Click to collapse
Is there a better backup than Google Drive for data - was so easy with TWRP ?
gaww said:
Is there a better backup than Google Drive for data - was so easy with TWRP ?
Click to expand...
Click to collapse
Use Google Drive backup, but you should first temporarily turn off your password/fingerprint authentication. That's the only way to ensure a complete backup is run. That's been an issue with Google device backup as a whole since 9.0 began enforcing encryption on backups.
You can turn it back on as soon as the backup completes.
One thing I've noticed already on this update is idle battery drain with 5G enabled (connected or not) has improved dramatically.
I would suggest that anyone who re-roots after makes sure to use a freshly patched kernel pulled after the update.
I just received a small update weighing in at 167MB and now it says version MP3
Is everyone else on this version already?
jananan said:
I just received a small update weighing in at 167MB and now it says version MP3
Is everyone else on this version already?
Click to expand...
Click to collapse
Yes
Just got the update just now as well.
But not able to update from OTA. Can someone drop a zip of the newest update so I can update, please and thank you!
Cammarratta said:
Just got the update just now as well.
But not able to update from OTA. Can someone drop a zip of the newest update so I can update, please and thank you!
Click to expand...
Click to collapse
You rooted? If so, thats why.
I am. That's an interesting find.
Cammarratta said:
I am. That's an interesting find.
Click to expand...
Click to collapse
You can't update rooted. Flash stock non rooted boot.img
bs3pro said:
You can't update rooted. Flash stock non rooted boot.img
Click to expand...
Click to collapse
Do you have a non rooted boot.img file?
Yes , in mp3...
Sent from my [device_name] using XDA-Developers Legacy app
Anyone having this issue, it's downloading & show updating then stops without updating and then shows that there is a new update
My phone is not rooted but fully unlocked (critical partition), is that the problem?
k2009 said:
Anyone having this issue, it's downloading & show updating then stops without updating and then shows that there is a new update
My phone is not rooted but fully unlocked (critical partition), is that the problem?
Click to expand...
Click to collapse
I just got mine so I haven't unlocked bootloader yet, the OTA went smoothly.
I tried looking for the OTA.zip but couldn't find it.
It didn't even warn me before the reboot to apply the update...
jananan said:
I just got mine so I haven't unlocked bootloader yet, the OTA went smoothly.
I tried looking for the OTA.zip but couldn't find it.
It didn't even warn me before the reboot to apply the update...
Click to expand...
Click to collapse
Now even it's not showing that there is an update.
k2009 said:
Now even it's not showing that there is an update.
Click to expand...
Click to collapse
It will reappear in a day or 2.
Again received update with same issue, downloading and then says updating, don't shutdown the phone & after around 1 minute it stops without restart or updating then again showing that there is an update.
Any help?
Flash MP1 using *#*#1027#*#*, reboot to recovery, wipe data. Boot, update to mp2, reboot to mp2, take the mp3 update.
Do you have to reinstall all apps?
bs3pro said:
Flash MP1 using *#*#1027#*#*, reboot to recovery, wipe data. Boot, update to mp2, reboot to mp2, take the mp3 update.
Click to expand...
Click to collapse
did you do this with unlocked bootloader?
I mean Im already on MP2 and as others say, I cant update to MP3 it says updating and then restarts
raz0r9199 said:
Do you have to reinstall all apps?
Click to expand...
Click to collapse
omer919 said:
did you do this with unlocked bootloader?
I mean Im already on MP2 and as others say, I cant update to MP3 it says updating and then restarts
Click to expand...
Click to collapse
Yes, and follow my directions. Doesn't get much easier.
bs3pro said:
Flash MP1 using *#*#1027#*#*, reboot to recovery, wipe data. Boot, update to mp2, reboot to mp2, take the mp3 update.
Click to expand...
Click to collapse
Anyway can I do it without wiping the data.
Thanks.
can't wait for the next MIUI 12.hope it brings better navigator gestures like OnePlus and pixels.
jananan said:
can't wait for the next MIUI 12.hope it brings better navigator gestures like OnePlus and pixels.
Click to expand...
Click to collapse
Its horrible. I ran the CN version. Couldnt get back to joyui11 quick enough.