Using TWRP to ROOT on Marshmallow:
Installation~
1. Download TWRP from Downloads below, install device USB drivers and Odin 3.10.7.
2. Power off the device.
3. Boot to download mode (VOLUME DOWN/HOME/POWER).
4. Volume UP once.
5. Open Odin 3.10.7 as an administrator, connect the device to a usb port,
and make sure a blue button appears and says "Added" in description on the left.
6. Select AP or PDA for older Odin and search for the downloaded tar file.
7. Uncheck auto reboot from the second tab.
8. Start flash and you should see the succeeded command.
9. Unplug the device and long press POWER until it powers off or remove the battery.
10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).
11.Flash SuperSU.zip https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs
Link for the thread: https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
This should work on all J5 variants running on official stock Marshmallow without any issue.
Root for Lollipop:
https://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3338869
After installing the Twrp flash supersu: https://download.chainfire.eu/696/supersu/
Actually to install these cyanogenmod roms you need to be on lollipop bootloader.
If you are on Marshmallow and want to go back to LL then this thread is for you :
https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-upgrade-j5-2015-to-6-0-t3443904
Now the Rom installation:
CM13 : https://forum.xda-developers.com/ga...m-cyanogenmod-13-0-samsung-galaxy-j5-t3519580
AOSP SLIM 6 : https://forum.xda-developers.com/galaxy-j5/development/rom-slim6-samsung-galaxy-j5-2015-t3552471
RR 6.0.1 : https://forum.xda-developers.com/galaxy-j5/development/p-resurrectionremix-v5-7-4-t3497445
Lineage OS: https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
AOKP 7.1.1 : https://forum.xda-developers.com/galaxy-j5/development/rom-aokp-nougat-galaxy-j5-t3553450
After rooting the phone,installing TWRP and downloading the ROM u need to install it:
How to install:
From stock
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Reboot in recovery again
Flash Install Gapps (http://opengapps.org/)
Reboot!
Enjoy!
Upgrade from previous build
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM new build version
Reboot
Bugs of CM13 :
- Radio FM
- Camera doesnt work in Skype video call
- When you wanna record a video with SD 480p or QCIF resolution, the screen/camera becomes green with stripes, but you can see the video after recording.
Bugs of Lineage OS: in call audio doesn't work.
Thanks to @Nick Verse and @ganesh varma for CM13&CM12.1, TWRP recovery, @Koloses for his kernel, @#Henkate for his roms,kernels and guides. :good:
Nice guide man
We need roms for other variants!
The problem is, every rom is for J500F/FN, like 500H,M,G doest exist. Please upload links for other variants too! We love you and your roms! Let us use them too!
tahmid07 said:
The problem is, every rom is for J500F/FN, like 500H,M,G doest exist.[emoji14]Please upload links for other variants too! We love you and your roms! Let us use them too!
Click to expand...
Click to collapse
These roms arent mine lol. I don't have the knowledge to build them.
Unfortunately its a bit harder to build these roms for J500H,M,G but with such good devs thats not impossible...
Im using J500H stock,non rooted.
Sent from my SM-J500H using XDA-Developers Legacy app
Gent' said:
These roms arent mine lol. I don't have the knowledge to build them.
Unfortunately its a bit harder to build these roms for J500H,M,G but with such good devs thats not impossible...
Im using J500H stock,non rooted.
Click to expand...
Click to collapse
I'm with J500m and when there's no build for this you can flash j500f straightly.?
Taivotat2 said:
I'm with J500m and when there's no build for this you can flash j500f straightly.?
Click to expand...
Click to collapse
But,unfortunately it doesnt work like that when using H.
Gent' said:
But,unfortunately it doesnt work like that when using H.
Click to expand...
Click to collapse
So which ROMs are working with j500H? You're on stock as stated above. Are these devices rooted and with twrp? If rooted and with custom recovery tried modding boot.img?
Taivotat2 said:
So which ROMs are working with j500H? You're on stock as stated above. Are these devices rooted and with twrp? If rooted and with custom recovery tried modding boot.img?
Click to expand...
Click to collapse
Working:Cm12.1,Resurrectiom remix(also 5.1.1),Touchwiz ones like skies corsi ux etc.
And cm13 ported by zonik.
SoUnd001 tried modding boot.img but it didnt work neither.
He said that he wont try anymore...
Cm13 ported is good enough,but it has only on bug(MTP)!
Gent' said:
SoUnd001 tried modding boot.img but it didnt work neither.
He said that he wont try anymore...!
Click to expand...
Click to collapse
What a pity! If you"re not afraid you could try Vaserbanix tutorial to change kernel. I don't have PC right now, so I try this and could test every nougat ROM without downgrading, of course you will have some issues but worked for me and its better to stand waiting for devs work. Learned a lot with this and hope you will find useful too. ???☺
https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-to-replaceing-original-kernel-t3543167
After that I began to learn how to use osmosis wonderful tools.
Yuen.Jason22 said:
Nice guide man
Click to expand...
Click to collapse
World is small.
@Vatsal can you please close this thread?
Thread closed on op's request.
Regards
Vatsal,
Forum Moderator.
Related
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
TWRP for SM-C900F and SM-C900Y (Indian and Taiwanese Variants)
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Contributors
@travis82
@k2wl
Source Code: https://github.com/TeamWin
Source Code device tree: https://github.com/Galaxy-C9-Pro/twrp_android_device_samsung_c9lte
TWRP Download: https://www.androidfilehost.com/?fid=817550096634790824
SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
no-verity-no-encrypt: : https://www.androidfilehost.com/?fid=745425885120752506
Hi,
Great to hear that we got a fully working TWRP recovery for SM-C900F.
If I may suggest, Why don't you work on K2WL's Lineage Rom with his full permission for SM-C900F.
https://sourceforge.net/projects/c9lte/
It would be great. I successfully flashed both the files in the above link @ it works fine. But wifi, data, ril, camera, Sound doesn't work.
It would be great if you work on this. Please try.
Just need a Daily driver Rom..
What say?
:good::laugh:
@deadman96385 welcome in here buddy, ill give a try asap
@Pariki first of all its kinda rude to ask for such a thing, and please check this
Pariki said:
Hi,
Great to hear that we got a fully working TWRP recovery for SM-C900F.
If I may suggest, Why don't you work on K2WL's Lineage Rom with his full permission for SM-C900F.
https://sourceforge.net/projects/c9lte/
It would be great. I successfully flashed both the files in the above link @ it works fine. But wifi, data, ril, camera, Sound doesn't work.
It would be great if you work on this. Please try.
Just need a Daily driver Rom..
What say?
:good::laugh:
Click to expand...
Click to collapse
K2WL has no desire to work with anyone it seems because he hasn't responded to anyone so Travis and I have been working on it ourselves and have gotten to the same state he was in a matter of days. So it will happen soon don't worry.
AL_IRAQI said:
@deadman96385 welcome in here buddy, ill give a try asap
@Pariki first of all its kinda rude to ask for such a thing, and please check this
Click to expand...
Click to collapse
Thank you yes that is our GitHub where we are working on sm-c900y/sm-c900f and sm-c9000.
deadman96385 said:
Thank you yes that is our GitHub where we are working on sm-c900y/sm-c900f and sm-c9000.
Click to expand...
Click to collapse
Just a question buddy, which model do you have ?, i have c9000, and i've been trying to run the global ROM for c900f, but wifi doenst seems to work
i even tried running c9000 kernel on c900f, but it didnt help either, im sorry for off-topic
hey what ways to c900f rom installation for c9000 i want this
AL_IRAQI said:
Just a question buddy, which model do you have ?, i have c9000, and i've been trying to run the global ROM for c900f, but wifi doenst seems to work
i even tried running c9000 kernel on c900f, but it didnt help either, im sorry for off-topic
Click to expand...
Click to collapse
ahmetk711 said:
hey what ways to c900f rom installation for c9000 i want this
Click to expand...
Click to collapse
I have the sm-c900y (Taiwanese) which is very similar to sm-c900f. I don't know exactly why wifi doesn't work across the Indian/Taiwanese variant and the Chinese variant
İ flashed this recovery but ummounted data error and i didnt install any rom. The dont see internal memory. What problem.
ahmetk711 said:
İ flashed this recovery but ummounted data error and i didnt install any rom. The dont see internal memory. What problem.
Click to expand...
Click to collapse
You need to wipe your internal memory because Samsung encrypts it with a non-standard method so we can not decrypt it in twrp.
But erroring while wipe data same issue pls help me
ahmetk711 said:
But erroring while wipe data same issue pls help me
Click to expand...
Click to collapse
============
This might help you...
https://forum.xda-developers.com/showpost.php?p=71792618&postcount=10
:good:
very very thanks man. This is fix my problem. i forgot format data
Thanks
Hi again buddy, device name while using mtp is "omni_c9lte", is it possible to remove "omni" from the name ?
it's not booting in Custom REcovery
may be i am doing something wrong ..can you help me plz?
i flashed TWRP as shown in link but it's not booting again in Custom recovery
deadman96385 said:
TWRP for SM-C900F and SM-C900Y (Indian and Taiwanese Variants)
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Contributors
@travis82
@k2wl
Source Code: https://github.com/TeamWin
Source Code device tree: https://github.com/Galaxy-C9-Pro/twrp_android_device_samsung_c9lte
TWRP Download: https://www.androidfilehost.com/?fid=817550096634790824
SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
no-verity-no-encrypt: : https://www.androidfilehost.com/?fid=745425885120752506
Click to expand...
Click to collapse
untick auto reboot in odin, and do reboot manually
Hi!
Just wanted to publish here the CR-DROID-ROM for our beloved Xiaomi Redmi 3/Pro.
Note:
I'm only the publisher, not the maintainer of this ROM. While you can post bug-reports here, they cannot be fixed by me.
Description from the dev-site:
This is a free AOSP / CyanogenMod Android based ROM bringing a lot of custom features ported from AOSPA, SlimRoms, OmniRom and many others great roms out there
crDroid brings what Android have of most advanced in terms of customization and stability.
Click to expand...
Click to collapse
The dev-site at Google+:
https://plus.google.com/communities/118297646046960923906
LINKS:
DOWNLOAD-LINK for crDroid with standard-kernel (hosted at Mega.nz)
DOWNLOAD-LINK for crDroid with DT2W-kernel (hosted at Mega.nz)
WHOLE DOWNLOAD-FOLDER (with older versions)
New Revision is out:
Xiaomi Redmi 3/Pro ROM CR-Droid 7.1.2 V3.8.3 Official-Build 2017-11-25
Just flash with with any version of Open-Gapps 7.1 (ARM64) (I recommend to use "Pico") and Magisk.zip. Don't forget to install the app "Magisk-Manager"!
Credits go out to Bondstas (UA) for generating this ROM.
P.S.:
The thread will be updated from time to time if I notice, that a new version of CR-Droid is out.
Update-history:
15-08/2017: CR-Droid V3.7 from 15-08/2017 is out!
25-08/2017: CR-Droid V3.7 from 15-08/2017 with DT2W-kernel added!
11-10/2017: CR-Droid V3.7 from 09-10/2017 is out!
14-10/2017: CR-Droid V3.7 from 09-10/2017 with DT2W-kernel added!
18-11/2017: CR-Droid V3.8.2 from 01-11/2017 is out!
31-01/2018: CR-Droid V3.8.3 from 25-11/2017 released!
01-02/2017: CR-Droid V3.8.3 from 25-11/2017 with DT2W-kernel added!
Thanks a lot!
Another ROM for our Redmi3!
crDroid V3.7 from 15-08/2017 is released! - Download see 1st post!
Is this the same with bondstas build ?
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
No, I think it's the one from Winkarbik.
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
frankonia said:
No, I think it's the one from Winkarbik.
Click to expand...
Click to collapse
but, the rom size is the same
Ok, then you are probably right. I have it from 4PDA.
ABDZR_43 said:
but, the rom size is the same
Click to expand...
Click to collapse
The best way is by calculating md5 checksum of zips.
Sent from my Redmi Note 4 using XDA Labs
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
You must have a focaltech panel. https://forum.xda-developers.com/showpost.php?p=68344933&postcount=493
3.6 https://mega.nz/#!35AVQKRR!M5b72YaeK9vv0JMs0x-iZupP93KVKofP8095JJ3GL2A
3.7 https://mega.nz/#!vlpUAbCY!yWF15BcwyKVGB1X4TxF3bWoZPiXNRFbKIHWn6zNxNI4
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
I took a look in the "About"-menue: Under "Kernel-version" stands "3.10.107-lineageos.... winkarbik@ubuntusrv #1"
So this ROM is from WinKarbik.
double-post => deleted!
tripper22 said:
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
Click to expand...
Click to collapse
I inserted the DT2W-kernel to the main ROM-file. Download-link in the first post!
This ROM has problem with Xposed making phone unbootable.
I tried two other ROMs (Lineage and AICP) which don't have the problem.
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
JOLLYNERY said:
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
Click to expand...
Click to collapse
Excuse me in advance for going OT but before trying to install custom roms, have you tried to flash global version of MIUI that is bundled with most of world languages and can fit your needs: it has got working google play, not a single china app and is working fairly well in all parts. It can be easily flashed on locked bootloader as well using miflash tool, a windows 64 bit system and putting the phone in download mode.
You can find most of informations here http://en.miui.com/thread-228048-1-1.html
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
JOLLYNERY said:
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
Click to expand...
Click to collapse
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
ivanhoe1976 said:
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
Click to expand...
Click to collapse
lemme try it out bro, thanks alot.
JOLLYNERY said:
lemme try it out bro, thanks alot.
Click to expand...
Click to collapse
Guys it didn't work out for. I tried updating through updater but it didn't. Then through pc, it didn't respond. Says I am not allowed to update to any other ROM that is, not a STABLE.
I would b grateful if u assist.
Thanx
ivanhoe1976 said:
if you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in twrp (immediately after you flash twrp i mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: This will patch boot.img and you will have a "permanent" twrp that won't go away at first system restart. Now you can install supersu or any custom rom you want to try without any problem! Now, after much time on miui 8, i'm on los 14.1, but i've tried many other custom roms, each of one was stable and good for daily use except aex which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. Cr-droid is very good as well!
Click to expand...
Click to collapse
it didnt work out. It requested i can only update with stable rom. Because i tried updating with global dev rom . I might just trash this fone
............ Xda has the authority to remove my post if my post is on the wrong place or without there permission ..
Mokee team has the authority to remove my post because they are the Dev of this .... And both of xda and mokee has all the rights to remove this ....
............... Disclaimer..............
This rom isn't belongs to me .. I'm not a Dev, not a maintainer, nothing ......
THIS ROM BELONGS TO MOKEE TEAM .
THEY are working for this rom..
Mokee os is giving nightly updates ...
................... warning.......
Mokee team, or me no one is responsible for dead sd card, nuclear war, for nothing that could be happen by installing this is .........
Installing this os is your own decision.......
Rom information.....
Based on aosp...
Status nightly...
Os version 9.0.
Kernel version 3.18.14.
Open gapps https://opengapps.org/
Optional gapps flame gapps
Tested on a520l
Download a5 2017 https://download.mokeedev.com/a5y17lte.html
Download a7 2017 https://download.mokeedev.com/a7y17lte.html
Read first
If you stuck on boot loop
Change gapps version (example ) if you got boot loop with latest gapps than flash the older gapps ..
Recommend gapps nano, micro ...
If
Screen shots
Hello, if there video call good? dont laggy? whatsapp ?
TheGunner22 said:
Hello, if there video call good? dont laggy? whatsapp ?
Click to expand...
Click to collapse
Try it and explore :laugh:
devil meru said:
Try it and explore :laugh:
Click to expand...
Click to collapse
now i'm goning to test
Post moved to guide news and discussion
devil meru said:
Post moved to guide news and discussion
Click to expand...
Click to collapse
have that here too , whatapp video call very very laggy.
i need video calls bec i'm deaf.
thanks anyway.
TheGunner22 said:
have that here too , whatapp video call very very laggy.
i need video calls bec i'm deaf.
thanks anyway.
Click to expand...
Click to collapse
I will suggest you to stay on stock if you want this ..
2nd try option58 a7 port for a5 best rom ever ...
Same as stock Samsung firmware try it
TheGunner22 said:
have that here too , whatapp video call very very laggy.
i need video calls bec i'm deaf.
thanks anyway.
Click to expand...
Click to collapse
As I said in the other thread, we're basically out of luck until it gets fixed in lineage. If it's not fixed in los 16, hopefully it is in los17.
SnowFuhrer said:
As I said in the other thread, we're basically out of luck until it gets fixed in lineage. If it's not fixed in los 16, hopefully it is in los17.
Click to expand...
Click to collapse
Right...
I'm still checking the rom. searching for bugs, thanks for this btw. good job!
Shiroyuki82 said:
I'm still checking the rom. searching for bugs, thanks for this btw. good job!
Click to expand...
Click to collapse
:good:
SnowFuhrer said:
As I said in the other thread, we're basically out of luck until it gets fixed in lineage. If it's not fixed in los 16, hopefully it is in los17.
Click to expand...
Click to collapse
i will hope.
---------- Post added at 14:12 ---------- Previous post was at 14:11 ----------
Shiroyuki82 said:
I'm still checking the rom. searching for bugs, thanks for this btw. good job!
Click to expand...
Click to collapse
you know that have bug with video calls right?
YouTube link
ok
please can you upload the twrp you used because I try to install but restart in the twrp and it doesn't boot
Blaster27 said:
please can you upload the twrp you used because I try to install but restart in the twrp and it doesn't boot
Click to expand...
Click to collapse
https://dl.twrp.me/a5y17lte/
Install latest twrp 3.3.1.1
Oem unlock ..
Goto download mode connect to odin
un check auto reboot
Flssh twrp .
Reboot into recovery (donot boot into system )
Format data ..
Flash rmm
Reboot to recovery again .
Flash the rom you wanna flash
ok
devil meru said:
Oem unlock ..
Goto download mode connect to odin
un check auto reboot
Flssh twrp .
Reboot into recovery (donot boot into system )
Format data ..
Flash rmm
Reboot to recovery again .
Flash the rom you wanna flash
Click to expand...
Click to collapse
I install the rom, but it doesn't start it stays in the logo and then reboots and stays in recovery
Twrp https://dl.twrp.me/a7y17lte/
Rom https://download.mokeedev.com/a7y17lte.html
Gapps https://opengapps.org/
Kernel https://androidfilehost.com/?fid=4349826312261646718
I have uploaded all files you need
Rom gapps kernel twrp .... Flash rom flash gapps reboot
If you stuck on boot loop goto trwp flash rom again gapps and flash kernel ..
If still you have boot loop than try lineage 16, crdroid , pixel ex,
And see if any of these rom successfully boot..
Than copy the kernel.img from the rom which is booted ..and flash mokee os gapps and that img file ..
Hope it will boot ....
POSP A10 Latest Build 02/04/2022
Works
1. Volte working
2. Screen cast fixed
3. Charging fixed
4. Gapps works
5. Battery works
and all.
Thanks all the dev's.
Features
- 32bit
none till now
Rom link :- https://sourceforge.net/projects/oppo-a37/files/32bit/potato_A37-10-20220402-croquette.v3.2.2+18.Community.zip/download
Gapps - Use ARM Bit gapps
Change wallper if fell lag with default one.
Community group :- https://t.me/oppoa37community
Great buddy ! xD
Thanks
What version of TWRP are you using?
datzno2004 said:
What version of TWRP are you using?
Click to expand...
Click to collapse
If you are getting the error "A37 Required, This device is f1f" Then get twrp 3.3 from telegram group or just open rom zip go to "META-INF\com\google\android" and edit the updater-script file
meesam3379 said:
If you are getting the error "A37 Required, This device is f1f" Then get twrp 3.3 from telegram group or just open rom zip go to "META-INF\com\google\android" and edit the updater-script file
Click to expand...
Click to collapse
oki
will this work lag free i want to root and install custom room in my oppo a37fw please tell me steps by step procedure to that with working links
Toxic razer said:
will this work lag free i want to root and install custom room in my oppo a37fw please tell me steps by step procedure to that with working links
Click to expand...
Click to collapse
The performance of this rom was not that good and since it's an extremely old phone you should consider upgrading.
Try Using LineageOS 17.1
Steps to install:
1.) Downgrade Your Oppo A37 Using A PC (Join Telegram Group For More Info)
2.) Root it using Kingo Root (King Root Should work but it didn't in my case so try either of them)
3.) Download Flashify from here.
3.) Download TWRP Image File(Preferably The one in Telegram Since it's a newer version)
4.) Flash it using Flashify to recovery (grant root access and all other permissions)
5.) Download ROM zip.
6.) Reboot to Recovery
7.) Go to Wipe and Wipe System,Cache,Dalvikand Data. DO NOT wipe internal storage since this is where our rom is downloaded
8.) Go to install and install the rom
9.) Reboot the device and done
For root
Download magisk and flash it without wiping anything after you booted into the custom rom
thanks bro i am going to try it make sure to help me in telegram if something bad happens
can anyone please guide me how to rot oppo a37fw
pls i beg you
DeepakChaurasia said:
POSP A10 Latest Build 02/04/2022
Works
1. Volte working
2. Screen cast fixed
3. Charging fixed
4. Gapps works
5. Battery works
and all.
Thanks all the dev's.
Features
- 32bit
none till now
Rom link :- https://sourceforge.net/projects/oppo-a37/files/32bit/potato_A37-10-20220402-croquette.v3.2.2+18.Community.zip/download
Gapps - Use ARM Bit gapps
Change wallper if fell lag with default one.
Community group :- https://t.me/oppoa37community
Click to expand...
Click to collapse
please can you guide me how to root oppo a37fw
dammit_oj said:
please can you guide me how to root oppo a37fw
Click to expand...
Click to collapse
hey bro , I can inderstand your situation , you wanted to root this poor old device to get some good performance but belive me bro i did this same with my device with same intentions But the result is not so good the device is still laggy , Video recording not working, Gps also not working that time i had spent almost 2 day to root and fix the things I suggest to Stay with stock rom otherwise the choise is yours