hello to all, i noticed that my redmi note 3 pro KATE ( i am on globerom 8.1.1.0 stable) has the minimum clock for big cluster, setted at 883mhz , and little cluster 691mhz BUT i can select on kernel adiutor the min freq of 400/ 400 mhz.
QUESTION 1 about freqNow i am with L speed app , and applied battery profile, but i don't understand why it does not automatically set the value to the MINIMUM POSSIBLE. Is there a reason?
Is there any CON to set the minimum cloto to cpu at 400mhz? i don't understand why xiaomi.eu and globerom modders did not set this freq to lowest possible, is it maube harmfull for the device?
should i have to set it by myself in kernel adiutor app? please help me to use this app, i just suppose i must apply 400mh setting, THEN choose to apply to boot ( there is a toggle).
What if i set at 400 and NOT toggle it?
QUESTION 2 about differences L speed and gov tuner flashable zip.I am sorry to admit that i'm not such skilled into android development and i have difficulties to understand terms like init.d or script meanings.....
For what i know i found pre installedon globerom the gov-tuner project zip file, then i discovered that that optimizations to the GOVERNOR, are also incorporated in another app called L speed. so i uninstalled gov tuner in this way:
1) entered into console, and entered the letter to disable gov tuner. ok,
2)then rebooted into recovery and flashed the zip for uninstaller.
DELETED! and i can say with that mod my battery life was really good almost perfect.
then i installed L speed, but still being a nice app with lots of features and explanatiions for EACH of them, i just setted overall provile to BATTERY, and cheched some other tweaks....EXCLUDING THE ONES that are described as battery wasting.
Then i asked to officiial thread if i have to reboot to apply, they said no... but it's PREFERABLE. OK I REBOOT.
by now i have worse battery life ( much worse) and i can't understand why.
I tested with console if gov tuner is still present, but NO. so there shoudn't be any conflict at all
sorry....if this 2nd question is THE BIGGEST ONE, but i really need to read someone suggestion and a simple explanation to understand if it's better l speed or gov tuner to me.
L speed seems very much powerful and can mod much more things... but is it safe? maybe there are so much options and i choosed 1 or 2 too much, and now i see bad battery life. but it's nearly impossible what is the option that causes me this.
And last important thing.... is it the same thing to implement these script or optimizations at the boot (i think gov tuner do it so) or after the boot like do L speed? ( i noticed into app a setting to choose 10 seconds after boot to apply scripts, in fact i see after each boot a notification about these applied scritps)
Hello,
sorry I can only answer question 1 since I dont use Lspeed.
Set it to 400MhZ Dude!
Doesnt harm your device, its still not laggy or anything.
Set apply on boot option and you`ll be golden.
RN3 has awesome battery life just stock. If you want more, install skynet. (was on xda, moved to google+)
There is even a guide somewhere out there for setting it to 400Mhz.
Cheers mate
Related
Hi everyone,
This is the first time owning a Samsung device, so the pegasusq governor is a new thing to me, I read about what it actually is on a thread but I wanted to ask to fellow S3 owners what are they using for great battery life - performance ratio?
I'm running Omega 6.0, slipstreamed loads of crap that is not needed (from the "safe to remove" thread) with Apex Launcher. I'm only using 2 homescreens, dark wallpaper, etc, the typical works to try and improve battery life.
Now the thing is, with SetCPU I'm running the default pegasusq governor ranging from 200mhz -1400mhz. Is the pegasusq governor the right choice here? Isn't it basically a variant of the OnDemand governor but Samsung proprietary for quadcore CPUs? I also recall reading a mention of S3's freezing or not waking up when it's set from the lowest underclocking point (200mhz), is that right? I've been using this for a few hours and no problems yet, but just wanted to know what are everyone elses experiences and what's the best configuration that has worked individually for you!
Cheers! Hope I complied with the rules, I did do a search but didn't find anything of this nature apart from a few separate questions!
I use the same governor, 100Mhz - 1704Mhz. No issues. Works great.
Siyah kernel is using pegasusq so i think it is the best governer there is. if you're on stock kernel or lowest underclocking is 200mhz but in custom kernels you can use 100mhz.
I have set my SetCPU to 100mhz - 1200mhz and undervolting all 18-steps to -50mv. I seldom reboot my phone but not encounter any freeze on boot
You should try tweaks for improving the battery life and peformance. Like supercharger, zipalling , random build.prop tweaks.... Etc xD but yeah use the samsungs "for quad core"
Thank you for the prompt replies everyone!
I remember with my Desire the whole development community was pretty much "set in stone" if you will, so it was really easy to choose a kernel etc.
Is there a kernel that you recommend? Is anyone using a "Screen Off" profile without any problems? If so what's the range you have it set at? That's what I was mostly scared as I remember on my Desire the lockscreen or taking calls would lag quite a bit but obviously this is a different beast altogether!
I'm also using AutoKiller Memory with Extreme Settings and some tweaks applied as well.
I use Siyah clocked 100-1704 screen on. 100-300 screen off. No issues.
Sptz said:
Is there a kernel that you recommend? Is anyone using a "Screen Off" profile without any problems? If so what's the range you have it set at? That's what I was mostly scared as I remember on my Desire the lockscreen or taking calls would lag quite a bit but obviously this is a different beast altogether!
Click to expand...
Click to collapse
I set mine to 100-600 not having any issues, when reiveng notification/phone calls doesn't lag at all. Just don't use "power saving" option.
Sptz said:
I'm also using AutoKiller Memory with Extreme Settings and some tweaks applied as well.
Click to expand...
Click to collapse
3rd party apps don't to any good to battery life it only consumes more(for me) cause it's always running in your background which consumes memory and also battery life.
stock task manager is pretty good, been use it always. Closing all apps and clearing memory
bordikun said:
I set mine to 100-600 not having any issues, when reiveng notification/phone calls doesn't lag at all. Just don't use "power saving" option.
3rd party apps don't to any good to battery life it only consumes more(for me) cause it's always running in your background which consumes memory and also battery life.
stock task manager is pretty good, been use it always. Closing all apps and clearing memory
Click to expand...
Click to collapse
Nah, Autokiller isnt a task manager.
Basically, Android automatically kills empty processes (etc) at specified RAM levels. It does this anyway. But on High end RAM packed devices, these values are too low to be of any use as the phone will seldom hit that low a level of free RAM.
Autokiller simply adjusts these values to be more useful for high end devices.
Actually, you don't need autokiller to do this. You can do it in an init.d script although I've not tested this on the SGS3 as I haven't seen a need.
Here is an example I wrote for my Desire AOSP ROM:
Code:
#!/system/bin/sh
echo "8192,16384,19200,23040,25600,30720" > /sys/module/lowmemorykiller/parameters/minfree
Default SGS3 is:
Code:
8192, 10240, 12288, 14336, 16387, 25600
These are for:
Foreground App, Visible App, Secondary Server, Hidden App, Content Provider, Empty App
as subject says. Has anyone tried this http://forum.xda-developers.com/showthread.php?t=1584508
Works pretty good for me
Note . Root needed i.e. for unlocked bl only
Sent from my Dell Streak using xda app-developers app
jitin02 said:
as subject says. Has anyone tried this http://forum.xda-developers.com/showthread.php?t=1584508
Works pretty good for me
Note . Root needed i.e. for unlocked bl only
Sent from my Dell Streak using xda app-developers app
Click to expand...
Click to collapse
here's the whole thread, note I have nothing related to Dev/team I am just reposting it to benefit xperia u,p,a,sola,go users
_______________________________________________________________
smokin1337 said:
CPU Editor
This mod allows you to easily change cpu settings on the fly, and supports dual core devices. Easier and cheaper $$ than available apps that do the same thing !!
Will work on most devices, it edits linux files so device manufacturer makes no difference.
Features:
Change CPU Governor
Change CPU Min/Max Frequencies
Apply Settings on Boot - Sticky Mode
Set Dual Core CPU's Independently - Governor and Frequencies
Force Dual Core - Second Core Online ALL The Time
Seperate Menus For Single and Dual Core Devices - Auto Selects
View Current Settings For Everything
Sticky Mode
OnDemand Profiling
Now uses config file to store values
Usage:
Open terminal
Type "su" without the quotes
Type "cpu" without the quotes
Make your selections
Notes:
An error appears sometimes when enabling or disabling force dual core, it's ok the settings still get applied.
Settings get applied immediately
Cores can be set independently, you can make the governors and frequencies different on each core. Could be a great battery saver by limiting the second cores resources.
Force Dual Core will make the second core stay online all the time
Some kernels do not have a available_scaling_freq so the available frequencies will not be displayed, look up the settings your kernel has either in your rom thread or kernel thread.
Sticky Mode will apply the settings you have made on reboot (requires init.d support- which most roms and most devices have)
OnDemand Profiling allows you to set profiles for ondemand governor, the settings possible are performance, performance and battery, and battery saver. Setting will only apply to ondemand govenor !! I will add more when i get some kernels for my one x.
The battery saver profile is ridiculous, my One X battery lasts a loooooong time with it on. I was at 19 hrs on battery and still at 71%. Try and see for yourself. Here is a screenshot: http://forum.xda-developers.com/showpost.php?p=27125704&postcount=3
Please report any bugs you may find here, this was tested on an evo 3d, one x, one s and a mytouch 4g.
Thanks to Orical for beta testing !!
Download:
http://goo.im/devs/smokin1337/Mods/CPU_Editor_RLS_4.zip
Click to expand...
Click to collapse
i have searched and re-searched a lot of times for threads that talk about my same problem, but none of them is related to it in terms of phone, kernel or ROM, and they're all nearly 2 years old
in addition, i am new to this forum, so please don't shoot me
anyway here it is:
i've tried almost every existing method to get governors like smartassV2 and interactive (my favorites) to stick without reverting to ondemand, but none worked
i noticed this:
in the exact moment the screen is locked, something sets the governor to ondemand
in the exact moment the screen is UNlocked, the same thing (i guess) sets it to performance, then to ondemand
since i know a bit about intents and receivers, i can say this behavior is triggered by android.intent.action.SCREEN_OFF/ON intents, so there must be some system apk with a receiver for those which reacts and changes governor accordingly
right now i'm running a modded init.qcom.post_boot.sh that sets back the governor to a custom one (i.e. smartassV2) every 20 seconds, which is the only way i can get it to "stick", however i hate this method 'cause it implies there is a shell running in the background, thus stealing some (yet minimal) resources and battery, and the problem is still there
some info that might come in handy:
phone: Acer Liquid Glow E330
ROM: Glowing Liquid 1.5.2 (ICS)
kernel: Lupo's kernel V3
take a look at the logcat screenshot attached, i think i found something but i have no idea what to do
EDIT: if you can't read what's in the pic, it's saying something about a CpuGovernorService
how is it possible that nobody cares? i've given more info than anyone else on this problem people, experts, devs, anyone, say sumthin'
Maybe try tot set it with an app like trickster mod and set it on boot? Or try another ROM to see if its a system app. Sorry I dont really know the programming part..
Sent from my Galaxy Nexus using XDA Premium HD app
i'll disable my script and give it a shot, however there is no other ROM, only two existing alternatives are stock (which only has crappy ondemand) and glowing liquid by vache
EDIT: didn't work dammit
UPDATE: by raising the log level to 7 in a custom boot.img i can now see PrintK saying this:
cpu_policy->user_policy.governor name interactive, str_governor = ondemand
update_cpufreq_governor cpufreq_update_policy return = 0
as a linux user, i know that PrintK is basically the kernel talking to the user/log daemon, so i am now asking help to kernel developers for any clues about it, and maybe how to change that parameter (or whatever it is) in the kernel to get rid of ondemand
as difficult as this can be to figure out, i'm sure that this would be the end to many headaches, so anyone who knows about how linux kernels work please help me find the solution to this thing
Alright, i give up, ain't no answers here
Somebody close/delete this goddamned thread, please
Sent from my scumbag cheap phone
SuicideFlasher said:
Alright, i give up, ain't no answers here
Somebody close/delete this goddamned thread, please
Sent from my scumbag cheap phone
Click to expand...
Click to collapse
hello , i got the same E330 , stock rom but root and kernel LupoV3 , to set it at 1300 mhz and SmartassV2 , maybe try Android tuner , or some who got possibility to change CPU with screen on/off , i'll try to see ...
Vache did a release 1.6 of this Rom , and Acer too (Acer_AV044_E330_1.041.01_EMEA) you can found them at Acer-club.fr
tchao
Speedo.thc said:
hello , i got the same E330 , stock rom but root and kernel LupoV3 , i set 1300 mhz and SmartassV2 with nofrills CPU , it work well.
Vache did a release 1.6 of this Rom , and Acer too (Acer_AV044_E330_1.041.01_EMEA) you can found them at Acer-club.fr
tchao
Click to expand...
Click to collapse
If you look closely, it resets to ondemand every time the screen changes state
Sent from an utter FAIL phone
EDIT: the thing is, i do have a cpu tuner with wake/sleep profiles, i simply can't seem to have it doing its job
also i stick on stock kernel because the other ones have buffer problems with music, and i'm not sacrificing my flac files for
crappy mp3s
SuicideFlasher said:
If you look closely, it resets to ondemand every time the screen changes state
Sent from an utter FAIL phone
EDIT: the thing is, i do have a cpu tuner with wake/sleep profiles, i simply can't seem to have it doing its job
also i stick on stock kernel because the other ones have buffer problems with music, and i'm not sacrificing my flac files for
crappy mp3s
Click to expand...
Click to collapse
is it this one ? "CPU tuner (Rooted phones)" on play store , i give it a chance yesterday and it looks to do the job, more than nofrill etc .... no easy to set fine but if i see the log file 'journal' it works , i come back to "smartassV2" (wich is "virtuel" gov settings) after wake up and at enter calls ...
Speedo.thc said:
is it this one ? "CPU tuner (Rooted phones)" on play store , i give it a chance yesterday and it looks to do the job, more than nofrill etc .... no easy to set fine but if i see the log file 'journal' it works , i come back to "smartassV2" (wich is "virtuel" gov settings) after wake up and at enter calls ...
Click to expand...
Click to collapse
No, just the setcpu implementation in rom toolbox. anyway i tried that "cpu tuner" and it kept forcing the governor to ondemand despite the "normal" mode being set to interactive (and yes, "normal" was the current setting)
Sent from an utter FAIL phone
I would love to get the battery life profiles from the custom kernels but I don't want to install them and would like to relay to the stock kernel of my rom which is RR. For reasons that I want to avoid bugs and would want to stay updated all the time.
I found spectrum which exactly what will solve my problem but the problem is that it doesn't support the stock kernel of RR.
Stock kernel of RR support "Kernel Adiutor". Kernel Adiutor give you various useful settings.
In my opinion the first is change voltage of your CPU (for each speed).
i Undervolt all Little cores:
(Warning each cpu need different settings, this setting can not work for you)
400 and 691 mhz with 695mv
806mhz 745mv
1017mhz 825mv
1190mhz 880mv
1305mhz 915mv
1382mhz 935mv
1401mhz 940mv
1440mhz 950mv
Big cores DISABLED. (i dont have lags with this settings... i play Clash Royale and use social apps, if you need it enable)
In GPU (i dont play games except Clash Royale)
133mhz min
432mhz max
Down differential 75
Iddle wait 7
Workload 10
For test speed/voltage you need to set same min and max speed and disable de Big Cores. (Or set max speed "X"mhz and use performance governor)
low voltage
use Antutu for test or other similar app.
if work low voltage again
test
if work repeat if not raise the voltage 5 or 10 mv and test again.
DONT USE "APPLY ON BOOT" when you try different voltages.
when you have your profile save this and here in profile menu you can set it at startup (you need to be sure of your phone stability with this settings).
Equally i recommend Agni kernel 13... i use before RR oreo and now AEX oreo and im happy with this kernel, zero problems, all fine.
in this forum other users try with VULMAX but i prefer my settings in manual and not with profile (i dont know the changes in each profile). https://forum.xda-developers.com/redmi-note-3/themes/xgh-t3701825
You can enable ForceDoze with patch https://forum.xda-developers.com/redmi-note-3/themes/universalforcedoze-deepsleep-googledns-t3770350
With ForceDoze you may have problems with sync of message apps or with clock update (you can fix it in your battery settings> optimized apps)
How often does AGNI gets updated?
drckml said:
How often does AGNI gets updated?
Click to expand...
Click to collapse
i dont know but is really good for me.
Equally if you like stock kernels may use RR stock kernel + Kernel Adiutor without problems.
link of agni kernel: https://forum.xda-developers.com/re...nel-24-09-2016-agni-puremiui-mm-v1-4-t3468042
last update 2018-06-28
I tried Vulmax and the battery config and it made my phone really fast, literally as in the animations of closing and opening of apps became way too fast. I think Kernel Auditor would be better for me.
drckml said:
I tried Vulmax and the battery config and it made my phone really fast, literally as in the animations of closing and opening of apps became way too fast. I think Kernel Auditor would be better for me.
Click to expand...
Click to collapse
you can change animation speed from the developer options in the settings.. disabling animation saves a bit battery thats y it is disabled
TruWhite MOD for Overload Kernel by RandomDelta
I have put together my settings for extracting the best performance with minimal effect on battery life from our Le eco Le 2. I have calibrated the display to true paper white colors and increased saturation to emulate AMOLED displays. Some of you may not like that so you can turn down the color saturation. While changing Voltage settings, please note that not all processors are built the same and yours might not be able to withstand the overclock. If for some reason there are random freezes, Just lower the voltage by 5mv after rebooting. The color profile has been extracted from Le eco vivid color mode EUI 5.9 with boosted color saturation . Not all displays are created equal so the color profile may not be perfect for you. Just adjust RGB by ±5 to get what works best for you. Word of caution, while playing games the phone can get pretty warm. If it concerns you, lower the throttle temperature and Temperature limit under thermal at the cost of some performance. Screen on time is 8 hrs at 50% brightness and 6 hrs at 100% brightness. I recommend 90% for optimum usage. Download the attached zip and adjust settings as in the pictures. Performance Is up by 20% from stock settings and battery usage is 5%less than stock settings. Performance test screenshot is also attached.
Hope you like it . Do comment on how you like it
Suggestions and Requests are welcome.
XDA DevDB Information
TruWhite MOD for Overload Kernel by RandomDelta, Device Specific for the LeEco Le 2 (x52X)
Credits
renjian- for making Overload Kernel
RandomDelta - For Custom Settings and optimizations.
If you don't have Overload Kernel, you can download your preferred version from the link given below
https://androidfilehost.com/?w=files&flid=283143
Instructions
1. Download and flash preferred version of Overload Kernel in Twrp
2. Install Kernel Adiutor and give it Root privileges
3. Download and extract image files from the zip file for corresponding Overload Kernel Version in this post.
4. Compare settings in screenshot images in zip to the settings in Kernel Adiutor and set them to values mentioned in the screen shots. Set them to be applied on Boot. Wait for a few seconds and the new settings will have applied .
Notes:
1. Distribution of TruWhite Mod files directly is not allowed. You are requested to drop a link to this page on the thread you wish to.
2. This is not a flashable zip
3. .json files will be made available on request. Using the .Json file you can import it in kernel Adiutor (donate version),set that to apply on boot and hence apply the customizations in a single click rather than having to fiddle with various settings.
Donation
If you like my work, you can donate me a cup of coffee.
UPI: [email protected]
Changelog
v1.0
1.Smoother I/O performance than stock
2.Increased CPU and GPU performance than stock
3. Fine tuned color profile for a more color accurate vibrant display leading to a more enjoyable media playback experience and Better visibility of small targets in competitive games.
4.Tuned CPU voltages to further increase performance with minimal effect on battery
5. Thermals tuned for delivering maximum performance without thermal throttling .
6. Optimized Memory manager for multi-tasking
7. LKT is not recommended
8. Optimized only for Overload Kernel v4.14
v1.1
1. Increased I/O performance
2.Changed screen color calibration to reduce eye strain
3.Now compatible with LKT
4.Optimized for Overload Kernel v4.14 and v4.15
v1.2
1. Optimized for Overload Kernel v4.19
2. Optimized battery life further.
3. LKT balanced or battery mode suggested as add on.
4.Reduced I/O lag
5. Removed Performance test screenshot
6.Also applicable to Overload Kernel v4.17, v4.18 and v4.20
v1.3
1. Optimized for Overload Kernel v4.21
2. Improved Standby time
3. Improved peak performance by upto 7%
4. Changed screen color calibration to fix oversaturated yellows
5. I/O operations are now less battery intensive
6. Improved Network Performance for faster downloads
7. Optimized thermal performance further
8. Also applicable to Overload Kernel v4.22
9. Color Profile and Thermal calibration is no longer optimised on devices running June 2019 patch or newer due to updated libs.
v1.4
1. Fixed Color Profile and Thermal profile for optimum performance.
2.Tuned Kcal to be slightly warm to reduce eye fatigue.
3. Color Calibration based on Redmi Note 7 Pro Increased Contrast (Cool) display profile.
4.Improved Standby time significantly.
5. Reduced idle battery drain
6. Increased GPU performance while gaming.
7.Tuned Cpu Voltages to prioritise performance under heavy load and battery under light load.
8. Unable to fix I/O lag. Still looking into how to solve it. Help is appreciated. Virtual Memory needs to be tweaked further.
9. Optimized for Overload Kernel v4.23
This project has been abandoned as Overload Kernel is no longer being updated
Version information
Status : Stable
Current Stable Version : v1.4
Latest Version :v1.4
Final Version :v1.4
Created 25-01-2019
Last Updated 28-07-2019
Reserved
Can this for 4.15?
How about gaming?
Its good or nah?
Restian Rony said:
Can this for 4.15?
How about gaming?
Its good or nah?
Click to expand...
Click to collapse
Every Version of kernel is different from each other and features pop up and disappear with updates. So certain customizations mentioned in this guide may not be available in a different kernel version. Also, optimum values tend to differ from kernel version to version. So yeah, it'll work in v4.15 but you might not get the best results.
It's good for gaming coz you get a 20% performance boost over stock. You can improve performance further by changing CPU and GPU governers to Performance, increasing minimum CPU and GPU speed, increasing minimum number of big cores online and increasing the temperature limits but it will adversely affect your thermals and battery life.
RandomDelta said:
Every Version of kernel is different from each other and features pop up and disappear with updates. So certain customizations mentioned in this guide may not be available in a different kernel version. Also, optimum values tend to differ from kernel version to version. So yeah, it'll work in v4.15 but you might not get the best results.
It's good for gaming coz you get a 20% performance boost over stock. You can improve performance further by changing CPU and GPU governers to Performance, increasing minimum CPU mad GPU speed, increasing minimum number of big cores online and increasing the temperature limits but it will adversely affect your thermals and battery life.
Click to expand...
Click to collapse
Wow thanks mate
Love u ?
Update
V1.1 now available.
Will release performance biased mod shortly. Hope you all like it
I can not find the core control setting screen (the one attached)
Why not share the .json profile file directly?
danyel980 said:
I can not find the core control setting screen (the one attached)
Why not share the .json profile file directly?
Click to expand...
Click to collapse
Are you on Overload kernel v4.14. Please ensure that you are. Even if I share the Json file, that setting won't be applied because that setting doesn't exist for the kernel you are on. So it's pointless. Plus to apply the Json file, you need to have the pro version of Kernel Adiutor , which most of us don't. If you want the Json file, it's linked below.
It's the v1.1 Balanced profile
RandomDelta said:
Are you on Overload kernel v4.14. Please ensure that you are. Even if I share the Json file, that setting won't be applied because that setting doesn't exist for the kernel you are on. So it's pointless. Plus to apply the Json file, you need to have the pro version of Kernel Adiutor , which most of us don't. If you want the Json file, it's linked below.
It's the v1.1 Balanced profile
Click to expand...
Click to collapse
yes, I'm overloaded 4.14 but I can not find the screen in question.
thanks for the .json file, even if you say in effect it does not make much sense unless you can apply the whole configuration. I would like to understand why I do not find the setting, however
danyel980 said:
yes, I'm overloaded 4.14 but I can not find the screen in question.
thanks for the .json file, even if you say in effect it does not make much sense unless you can apply the whole configuration. I would like to understand why I do not find the setting, however
Click to expand...
Click to collapse
Maybe there was some error during the flashing process. You should redownload the kernel And flash it again. It should solve the issue.
Custom settings for Overload Kernel v4.19 has been released
Settings for v4.20 are the same as for v4.19. So I'm not reposting.
Settings for v4.21 will be released soon.
Thanks for the great work
Waiting for v21 TIA
TruWhite MOD v1.3 for overload kernel v4.21 has been released!
I will not be releasing performance biased mod because in my opinion the battery trade off associated is not worth the tiny performance gain.
RandomDelta said:
TruWhite MOD v1.3 for overload kernel v4.21 has been released!
I will not be releasing performance biased mod because in my opinion the battery trade off associated is not worth the tiny performance gain.
Click to expand...
Click to collapse
After downloading and flashing Ol 4.21, it is showing 4.20 of 17th Feb..... What to do?
MpS005 said:
After downloading and flashing Ol 4.21, it is showing 4.20 of 17th Feb..... What to do?
Click to expand...
Click to collapse
Don't worry . You are on v4.21. Renjian forgot to update the build release key description.
RandomDelta said:
Don't worry . You are on v4.21. Renjian forgot to update the build release key description.
Click to expand...
Click to collapse
but my last option for max frequencies for big cpu is 1478mhz. There's no 1800mhz or around it
MpS005 said:
but my last option for max frequencies for big cpu is 1478mhz. There's no 1800mhz or around it
Click to expand...
Click to collapse
It's for little CPU. You might be confused. Little CPU max out at 1478mhz in v4.21. Send screenshots . I might be able to help
RandomDelta said:
It's for little CPU. You might be confused. Little CPU max out at 1478mhz in v4.21. Send screenshots . I might be able to help
Click to expand...
Click to collapse
I sorted out. It was showing wrong info. It was showing 1478mhz in big and 1843mhz in small. LOL. I force stopped app and rebooted phone. Then, it was correct.....Wait for results now:fingers-crossed: