Greetings!
I'm facing this weird problem that some people seem to have as well. The device is recognizing my SIM card, but there's no network connectivity. I cannot connect to WiFi and it's showing this ridiculous MAC address. Bluetooth can be enabled, but other devices can't see it, so it's malfunctioning as well.
I have this problem on many official ROMs. Bootlocker is locked.
I'm currently on Lineage OS. Installing it set my IMEI to 0, but I restored it with IMEI Changer (WriteDualIMEI(W+G_eMMC).exe).
Should I unlock the bootloader and flash modem NON-HLOS.bin, to attempt to restore network connectivity?
Have you check imei ???
if you have twrp alka backup then restore it.
Faced problem when downgrading miui mm to miui lp
[email protected] said:
Have you check imei ???
if you have twrp alka backup then restore it.
Faced problem when downgrading miui mm to miui lp
Click to expand...
Click to collapse
Thanks for replying. My IMEI is fine, as I mentioned in the first post. I don't have any backups, since I've just installed TWRP earlier today.
This n backup with alka keep saafe
Then flash latest miui mm dev via edl flash all unlock official
Then flash latest lineage
[email protected] said:
This n backup with alka keep saafe
Then flash latest miui mm dev via edl flash all unlock official
Then flash latest lineage
Click to expand...
Click to collapse
I tried multiple official roms, both dev and stable, Lollipop and Marshmallow. It's not a Lineage problem. I cannot unlock the bootloader officially, as I get stuck at 50% when it's trying to verify my device. I cannot log in to my MIUI account as there's no way for me to connect to the Internet.
Skochko said:
I tried multiple official roms, both dev and stable, Lollipop and Marshmallow. It's not a Lineage problem. I cannot unlock the bootloader officially, as I get stuck at 50% when it's trying to verify my device. I cannot log in to my MIUI account as there's no way for me to connect to the Internet.
Click to expand...
Click to collapse
Use download miui 8 6.11.3 fastboot ROM
Then flashing via edl just replace recovery IMG of stock to zcx after seeing operation completed successful
Then force reboot recovery
Then backup current ROM then factory reset + wipe system flash aosp 5.1.1 by Mr coldbird
Then reboot
Then chectout wifi ac and other stuff
Otherwise use this guide to unlock unofficially
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-beast-redmi-note-3-t3492297
[email protected] said:
Use download miui 8 6.11.3 fastboot ROM
Then flashing via edl just replace recovery IMG of stock to zcx after seeing operation completed successful
Then force reboot recovery
Then backup current ROM then factory reset + wipe system flash aosp 5.1.1 by Mr coldbird
Then reboot
Then chectout wifi ac and other stuff
Otherwise use this guide to unlock unofficially
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-beast-redmi-note-3-t3492297
Click to expand...
Click to collapse
I got same problem - MAC address is 02:00:00:00:00
Any luck to find a solution?
thanks!
pporchuk said:
I got same problem - MAC address is 02:00:00:00:00
Any luck to find a solution?
thanks!
Click to expand...
Click to collapse
Did anyone consider that hardware module for wifi &* bt is broken?
Check your phone box. The problem seems that your hardwares aren't detected right which need to be manually fixed by changing the Bluetooth and WiFi MAC Address. You can find the original hardware address on the box. And do some research on the Internet that works for your phone
Redmi note 3 kenzo WiFi, BT. MAC address is 02:00:00:00:00 problem
Redmi note 3 kenzo WiFi, BT. MAC address is 02:00:00:00:00. And imei is fine. What to do? Explain step by step!
Aditya krishna_ said:
Redmi note 3 kenzo WiFi, BT. MAC address is 02:00:00:00:00. And imei is fine. What to do? Explain step by step!
Click to expand...
Click to collapse
Having same issue . pls help
Related
Hello everyone. I have a second redmi note 3 that I was setting up and during the unlock I bricked the phone. It has since been unbricked and the bootloader unlocked properly. The issue being now the phone does not get any service. I have done every IEMI fix and have restored the IEMI successfully but still no service. I have tried the common LTE fixes (http://forum.xda-developers.com/redmi-note-3/how-to/how-to-restore-lost-redmi-note-3-pro-t3401622) but still nothing. I have tried flashing almost every verson of either the dev or stable china and global roms to see if it was the Modem. I have even flashed just the modem from those fastboot roms while running CM13. At this point Im willing to even put a bounty on helping me fix this if that is allowed by the fourm rules. So $20 Canadian to who ever helps me fix this if its possible!
http://en.miui.com/forum.php?mod=viewthread&tid=260943&highlight=IMEI+redmi+note+3&mobile=2
This is surely work
And Tell me the result
I have already tried that with no avail. I still get the same issue. In phone info under sim one the current network reads: Off and the GSM service reads radio off. It will not allow me to turn on the radio either
FeelTheBurne said:
I have already tried that with no avail. I still get the same issue. In phone info under sim one the current network reads: Off and the GSM service reads radio off. It will not allow me to turn on the radio either
Click to expand...
Click to collapse
Then go to the service center and change the pcb
I came acrooss with this issue just a week ago,I flashed stock Fastboot Recovery
FeelTheBurne said:
Hello everyone. I have a second redmi note 3 that I was setting up and during the unlock I bricked the phone. It has since been unbricked and the bootloader unlocked properly. The issue being now the phone does not get any service. I have done every IEMI fix and have restored the IEMI successfully but still no service. I have tried the common LTE fixes (http://forum.xda-developers.com/redmi-note-3/how-to/how-to-restore-lost-redmi-note-3-pro-t3401622) but still nothing. I have tried flashing almost every verson of either the dev or stable china and global roms to see if it was the Modem. I have even flashed just the modem from those fastboot roms while running CM13. At this point Im willing to even put a bounty on helping me fix this if that is allowed by the fourm rules. So $20 Canadian to who ever helps me fix this if its possible!
Click to expand...
Click to collapse
I came acrooss with this issue just a week ago, I flashed stock Fastboot Recovery
D.J XactiX said:
I came acrooss with this issue just a week ago, I flashed stock Fastboot Recovery
Click to expand...
Click to collapse
Gave this a try, still nothing. The sim is detected right away but the radio will not turn on
I would say follow the below steps:
1. Take backup of internal storage and EDL flash latest stable fastboot ROM (EDL flash will wipe your internal memory).
2. After reboot, if radio doesn't comes up then go to Settings >> About Device and tap on "Internal Memory" multiple times till you get the "Testing" screen. Also close the data from the notification toggle.
3. Inside the Testing screen, Select the correct SIM, "Phone Information 1" is for SIM 1 and "Phone Information 2" is for SIM 2.
4. Now, scroll down and select the correct value from the "Preferred network Type" . 4G - "LTE Only", 3G - "WCDMA Only", 2G/GSm - "GSM Only".
5. If still the network doesn't comes then go to your SIM settings and search and select your network manually.
6. After this if you are still missing radio/network, then I thnk you'll have to send it to service center for repair.
Same Prob for me
Have you found any solution?
Thanks in advance
Kenzo no network
HI. I HAVE THE SAME ISSUE WITH MY REDMILE NOTE 3 PRO. NO NETWORK. I HAVE ALSO TRIED EVERYTHING, DID YOU FIND A FIX FOR IT. THANK YOU
francoisslabbert1973 said:
HI. I HAVE THE SAME ISSUE WITH MY REDMILE NOTE 3 PRO. NO NETWORK. I HAVE ALSO TRIED EVERYTHING, DID YOU FIND A FIX FOR IT. THANK YOU
Click to expand...
Click to collapse
Did u unlock officially ???
Flash latest firmware.
radio off, no network
Yes it was unlock officially. Then I format the device in twrp and flashed pixel experience. After restart I noticed Mac a dress, imei, ip, device info is gone. I then search and tried everything. I got everyrhing back except no network. The radio cant be switched on at *#*#4636#*#* option.
---------- Post added at 07:23 AM ---------- Previous post was at 07:18 AM ----------
Black_Stark said:
Did u unlock officially ???
Flash latest firmware.
Click to expand...
Click to collapse
Yes it was unlocked officially. But I format the phone in twrp and flashed pixel experience. After restart I noticed that imei. Mac a dress, ip and device id is gone. I search for fix and did everything. I got everyrhing back except no network and radio off. I cant dind anyrhing new to fix this. All I find is all that I have done already.
francoisslabbert1973 said:
Yes it was unlock officially. Then I format the device in twrp and flashed pixel experience. After restart I noticed Mac a dress, imei, ip, device info is gone. I then search and tried everything. I got everyrhing back except no network. The radio cant be switched on at *#*#4636#*#* option.
---------- Post added at 07:23 AM ---------- Previous post was at 07:18 AM ----------
Yes it was unlocked officially. But I format the phone in twrp and flashed pixel experience. After restart I noticed that imei. Mac a dress, ip and device id is gone. I search for fix and did everything. I got everyrhing back except no network and radio off. I cant dind anyrhing new to fix this. All I find is all that I have done already.
Click to expand...
Click to collapse
Answer the following one by one.
Whats ur phone? Kenzo or kate?
Which twrp u used? Official, zcx, fox , redwolf ?
U should only wipe system, data and cache delvik.
Did u wipe persist, efs, modem partition ? Or flashed any modem zip ?
radio off, no network kenzo
My device is kenzo
Used official twrp 3.2.1.0 version
I know i shoukd have wiped dalvic and cache only but I used the format system. Which wiped everything
Yes in my steps I tried to fix the device I flash modemst1 and modemst2 NON-HLOS.
I also flashed all global roms for kenzo via no flash tool
I also manually flashed all files seperately via fastboot method
I used imei writer to write back the imei.
francoisslabbert1973 said:
My device is kenzo
Used official twrp 3.2.1.0 version
I know i shoukd have wiped dalvic and cache only but I used the format system. Which wiped everything
Yes in my steps I tried to fix the device I flash modemst1 and modemst2 NON-HLOS.
I also flashed all global roms for kenzo via no flash tool
I also manually flashed all files seperately via fastboot method
I used imei writer to write back the imei.
Click to expand...
Click to collapse
Format data only erase data and internal sd.
U dont need to manually flash all those files.
Just use fastboot rom. Just open rawprogram xml and partition xml file and check which file are included during flashing process in which label partition. And which are skipped.
Almost all files are flashed during fastboot flash. I think Modem too. Only persist img is not flashed. U can flash persist file manually.
First I thought imei number is hard coded in hardware but i was wrong. If u erase partition then its lost. I try to find efs partition in xml file. Couldnt find.
May be efs is nevertouched during fastboot flash. So should never touch EFS partition. I think in efs partition the imei number is manually written in factory.
If u erase efs then u cant get it back using fastboot rom. Only manually add it. U can search mi forums how to add it.
radio off, no network
Black_Stark said:
Format data only erase data and internal sd.
U dont need to manually flash all those files.
Just use fastboot rom. Just open rawprogram xml and partition xml file and check which file are included during flashing process in which label partition. And which are skipped.
Almost all files are flashed during fastboot flash. I think Modem too. Only persist img is not flashed. U can flash persist file manually.
First I thought imei number is hard coded in hardware but i was wrong. If u erase partition then its lost. I try to find efs partition in xml file. Couldnt find.
May be efs is nevertouched during fastboot flash. So should never touch EFS partition. I think in efs partition the imei number is manually written in factory.
If u erase efs then u cant get it back using fastboot rom. Only manually add it. U can search mi forums how to add it.
Click to expand...
Click to collapse
Thank you
---------- Post added at 09:24 AM ---------- Previous post was at 09:23 AM ----------
francoisslabbert1973 said:
Thank you
Click to expand...
Click to collapse
What file is responsible for the network or radio
francoisslabbert1973 said:
Thank you
---------- Post added at 09:24 AM ---------- Previous post was at 09:23 AM ----------
What file is responsible for the network or radio
Click to expand...
Click to collapse
Those Modem files
francoisslabbert1973 said:
My device is kenzo
Used official twrp 3.2.1.0 version
I know i shoukd have wiped dalvic and cache only but I used the format system. Which wiped everything
Yes in my steps I tried to fix the device I flash modemst1 and modemst2 NON-HLOS.
I also flashed all global roms for kenzo via no flash tool
I also manually flashed all files seperately via fastboot method
I used imei writer to write back the imei.
Click to expand...
Click to collapse
Other than official mi flash tool. Did u use SP flash tool or any other flash tool for kenzo??
radio off, no network redmi note 3 pro kenzo
Black_Stark said:
Other than official mi flash tool. Did u use SP flash tool or any other flash tool for kenzo??
Click to expand...
Click to collapse
Only miflash. And like I said also manually via fastboot method. I have tried everything again . my mac a dress is ok, both sim imei's is back, WiFi and Bluetooth is working. But still no network. I don't understand now. I have flashed via miflash global 8.1.1 fastboot rom. All details show except no network.
francoisslabbert1973 said:
Only miflash. And like I said also manually via fastboot method. I have tried everything again . my mac a dress is ok, both sim imei's is back, WiFi and Bluetooth is working. But still no network. I don't understand now. I have flashed via miflash global 8.1.1 fastboot rom. All details show except no network.
Click to expand...
Click to collapse
U flashed persist.img ?
radio off, no network redmi note 3 pro kenzo
Black_Stark said:
U flashed persist.img ?
Click to expand...
Click to collapse
Yes I did
hey guys,
while flashing a rom using mi flash tool it failed with an error "insufficient storage to execute this command"
because i was unaware of the fact that to use mi flash tool i have to use 64-bit OS
as this flaw was out of my mind i used -w command in fastboot,as i understood by the error statement,but it didn't work cause i was using 32-bit os
but after getting aware of the very fact i used 64-bit OS and the process succeeded
Now the phone is booting properly but my my sim cards are not working :crying:
but i afterward noticed that IMEI no. was unknown:silly:
so please help me in getting out of this embarrassing situation.
Thanks.
https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
hope this helps!
i faced the same problem and tried everything and nothing worked so i flashed latest official global stable rom 8.1.1.1 mhomidi from miflash tool via edl mode and unbricked my device. my baseband and imei all came back fine.
If u have an efs backup then restore it! It should get back ur imei and sim related stuff!
error
khajiit said:
https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
hope this helps!
Click to expand...
Click to collapse
i tried it but twrp stated this error
unable to find efs partition
try this, i personal test it and work perfect for me,
https://goo.gl/w3wfpp
Confusion
What is fastboot file of a ROM
Is it flashed in edl mode or fastboot mode
You might have flashed kenzo firmware to kate device.
I cannot find miui 8.1.1.1
I find 8.1.1.0 and I flashed it but it doesn't work
Can you share the link of miui 8.1.1.1 for Redmi note 3 kenzo
Kartik Nahta said:
I cannot find miui 8.1.1.1
I find 8.1.1.0 and I flashed it but it doesn't work
Can you share the link of miui 8.1.1.1 for Redmi note 3 kenzo
Click to expand...
Click to collapse
It's 8.1.1.0 indeed. Sry I miss typed it but my phone recovered with that. My baseband and imei was lost and I flashed global image and it all came back.
Sent from my Redmi Note 3 using XDA-Developers Legacy app
Noting is working. I am only getting failure.
The last option I have is to go to service centre.
install this app from playstore and manually add your both imei no. app name is Chamelephon
Hello.
I have a great issue at my new device.
Nor Wifi neither bluetooth can be activated.
I made firmware actualization, ROM changes, etc., but still does not work.
I heard this is a common problem, but i do not find any solution.
I would appreciate any help.
Thanks.
Hello, first of all try to erase EFS - flash this zip by twrp.
If it does not help, that try flash any ROM by fastboot. (For example cuco fastboot version).
Also update modem to v50
If this steps does not help u, 99,9% that u have hardware problem.
andr68rus said:
Hello, first of all try to erase EFS - flash this zip by twrp.
If it does not help, that try flash any ROM by fastboot. (For example cuco fastboot version).
Also update modem to v50
If this steps does not help u, 99,9% that u have hardware problem.
Click to expand...
Click to collapse
Thanks Andr68rus for the sharing.
My X820 (acquired 2nd hand knowing it's wifi and BT are not working) is facing a similar issue and had fastboot-flashed Cuoco Fastboot version yet it is not resolved. I also flashed a few other ROMs including Android 7 and 10 and 11 but no luck.
Would appreciate if you could reshare the "this zip" as well as the "v50" modem file for a try.
I flashed miui 10 latest stable in my kenzo
After 3 days I reboot my phone now device screen appears a black holo theme asking for password to decrypt data. I try my mobile password & miui password as well. But nothing works
Any suggestions?
Deeportal said:
I flashed miui 10 latest stable in my kenzo
After 3 days I reboot my phone now device screen appears a black holo theme asking for password to decrypt data. I try my mobile password & miui password as well. But nothing works
Any suggestions?
Click to expand...
Click to collapse
What password? Mi account password.?
How u flashed latest 10 stable rom?
Using miflash on pc ?
Or using system ota updater ?
First I tried mobile password unsuccessful
Then I tried miui password again unsuccessful
I flashed it via mi flash tool on my laptop
Deeportal said:
First I tried mobile password unsuccessful
Then I tried miui password again unsuccessful
I flashed it via mi flash tool on my laptop
Click to expand...
Click to collapse
Flash again using miflash tool on pc.
USE " CLEAN ALL" OPTION in mifash tool and flash.
Already did it 4 times before full clean & lock all option selected still no chance
Always after 3 or 4 days if I reboot my phone device automatically get encrypted
Deeportal said:
Already did it 4 times before full clean & lock all option selected still no chance
Always after 3 or 4 days if I reboot my phone device automatically get encrypted
Click to expand...
Click to collapse
Are u using same sim card which is registered to mi account?
Yes same sim card jio
Deeportal said:
Yes same sim card jio
Click to expand...
Click to collapse
If u can go inside phone.
Then first go to security settings .
And disable encryption before any reboot.
Whats ur bootloader status?? Is it locked?
I have unofficially unlocked bootloader
My device encryption is disabled I checked manually when I was on miui 10
I even tried manually encrypt my device to see it works
And it does 3 times but after that again my encryption password is saying wrong
Right now I m on havoc os
Deeportal said:
I have unofficially unlocked bootloader
My device encryption is disabled I checked manually when I was on miui 10
I even tried manually encrypt my device to see it works
And it does 3 times but after that again my encryption password is saying wrong
Right now I m on havoc os
Click to expand...
Click to collapse
Wtf dude. U said u r on miui.
If u r on havoc.
Go to twrp and format data
Press format data
Type YES to format
It will decrypt and erase data and internal sd.
Bro I Mean Whenever I m on miui 10 official
This thing always happen to me that's why I m using custom ROMs to avoid such things
But I really wanted to be on miui official
Deeportal said:
Bro I Mean Whenever I m on miui 10 official
This thing always happen to me that's why I m using custom ROMs to avoid such things
But I really wanted to be on miui official
Click to expand...
Click to collapse
Miui official is dead. End of life. If u face problem them why go.
Use xiaomi eu rom . its cuatom rom version of miui.
It can be flashed using twrp. No bootloop.
U can flash on unofficial bootloader.
But format data and wipe data both before flashing.
https://xiaomi.eu/community/
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv10/
I will try miui eu
Deeportal said:
I will try miui eu
Click to expand...
Click to collapse
Use latest twrp based on 3.2.3
Deeportal said:
I flashed miui 10 latest stable in my kenzo
After 3 days I reboot my phone now device screen appears a black holo theme asking for password to decrypt data. I try my mobile password & miui password as well. But nothing works
Any suggestions?
Click to expand...
Click to collapse
just try flashing lazy flasher in recovery....mi has enabled encryption by default in stable miui 10.or else root your rom with magisk v.18.0.
kenzo automatic encryption
Deeportal said:
First I tried mobile password unsuccessful
Then I tried miui password again unsuccessful
I flashed it via mi flash tool on my laptop
Click to expand...
Click to collapse
brother have u got any solution of it other thn formatting the data
akshatgautam13 said:
brother have u got any solution of it other thn formatting the data
Click to expand...
Click to collapse
Yes. Go to mahadev temple. Offer coconut and flower and milk to lord shiva.
akshatgautam13 said:
brother have u got any solution of it other thn formatting the data
Click to expand...
Click to collapse
If you want to get your data back then you can just use TWRP to take a backup of your data, or use a PC to copy it.
Hi,
My favourite phone is the Xiaomi Redmi note 3 Pro SE with Lineage OS 13 (Yes marshmallow).
I got a new one that was in endless bootloop and I planned to get it working.
I don't know if the bootloader has been unlocked and how (last time I checked it was written locked), if a custom ROM as been flashed or anything that could been done on it before I get it.
After many tries I first succeed to install LineageOs 13 on it, what I remember:
I go to fastboot mode
I go to edl mode
I flashed it with an old MiFlash 2016.04.01.0 64 bit with an old official ROM : kate_global_images_6.9.29_20160805.0000.29_6.0_global_9aa2d85137 with recovery.img replaced by an old ZXC-TWRP 3.0.2-X. (This is the way to get a recovery with no need to unlock bootloader)
I started it directly to TWRP recovery mode (to be sure TWRP will stay it I guess?) changed the language and checked OTA checkbox in parameters
I started this old official ROM once (to get the full storage capacity)
I discovered it was a 16GB ROM / 2GB RAM version instead a 32GBROM / 3GB RAM I previously knowed
I restarted to TWRP recovery mode
I wiped david/cache
I flashed the last knowed LineageOS 13 for this phone: https://forum.xda-developers.com/re...ageos-13-0-t3533744/post83687823#post83687823
I wiped david/cache
I flashed the last radeon kerned on it
I wiped david/cache
I restarted it to LineageOS 13
I restarted to TWRP recovery mode, changed the language and checked OTA checkbox in parameters
I flashed magisk (sytemless)
I wiped david/cache
I restarted it to LineageOS 13
I could use it install a lot of things, was happy with it
Before succeeding I tried a lot of combinations of official ROM/TWRP/MiFlash versions and this couple was the only one working.
Other MiFlash versions don't detect the phone in edl mode
But 2 weeks later, just after installing a new app, the phone sudently reboots and I got stuck in bootloop again...
I could go to recovery one time, I selected reboot system, now I can't go to recovery anymore
I still can go to fastboot mode and edl mode, and I can flash a ROM, but whatever I flash I can't go away from bootloop.
What could the new bootloop come from?
Is my installation sequence good?
Why only this combination of official ROM/TWRP/MiFlash versions was working?
Why can't I start a ROM anymore after a new flash?
Why can't I go to the recovery anymore after a new flash?
How to check if the emmc memory is defective (I got no error while flashing)?
Thanks for reading, hope someone still cares on this old great phone
Sorry for my bad English
No clue what the problem may be. What app did you install? You could always try to go back to stock if you haven't already. Basically wipe phone completely and flash stock through mi flash.
JD. A said:
No clue what the problem may be. What app did you install? You could always try to go back to stock if you haven't already. Basically wipe phone completely and flash stock through mi flash.
Click to expand...
Click to collapse
Thanks for your answer.
The last app before bootloop was a sms/mms backup app on google store I get through Aurora.
I tried to flash the stock ROM (old one) kate_global_images_6.9.29_20160805.0000.29_6.0_glo bal_9aa2d85137 but it doesn't start, always bootloop.
I have no option to wipe on the only miflash version that detect my phone in edl : the 2016.04.01.0 64 bit version. so I choose flash all data/storage include, but still bootloop.
Why are you using such a old rom? Use latest miflash and latest global. On the bottom right of miflash you should have something like clean and lock. Just note that if you're unofficially unlocked you'll need to apply for unlock or unlock unofficially again.
JD. A said:
Why are you using such a old rom? Use latest miflash and latest global. On the bottom right of miflash you should have something like clean and lock. Just note that if you're unofficially unlocked you'll need to apply for unlock or unlock unofficially again.
Click to expand...
Click to collapse
Other Miflash version don't detect my phone when it is in edl mode
I could start other stock rom, I know tried this ones:
kate_global_images_7.6.8_20170608.0000.00_6.0_global_2040bd5a39
kate_global_images_8.12.13_20181213.0000.00_6.0_global_304fc0692b
But I couldn't flash my LineageOS 13 + recovery with those.
I tried so much combinations TWRP/Stock rom, I don't remember what I tested.
I just know the MiFlash 2016.04.01.0 64 bit with an old official ROM : kate_global_images_6.9.29_20160805.0000.29_6.0_glo bal_9aa2d85137 with recovery.img replaced by an old ZXC-TWRP 3.0.2-X. was the only one combination that worked for me for installing LineageOS 13 + recovery working
Now, every time I try to flash something (whatever it is) it goes to bootloop...
Only fastboot and edl mode are working
If you have other links / combinations I would be happy to try
ROUGE13 said:
Other Miflash version don't detect my phone when it is in edl mode
I could start other stock rom, I know tried this ones:
kate_global_images_7.6.8_20170608.0000.00_6.0_global_2040bd5a39
kate_global_images_8.12.13_20181213.0000.00_6.0_global_304fc0692b
But I couldn't flash my LineageOS 13 + recovery with those.
I tried so much combinations TWRP/Stock rom, I don't remember what I tested.
I just know the MiFlash 2016.04.01.0 64 bit with an old official ROM : kate_global_images_6.9.29_20160805.0000.29_6.0_glo bal_9aa2d85137 with recovery.img replaced by an old ZXC-TWRP 3.0.2-X. was the only one combination that worked for me for installing LineageOS 13 + recovery working
Now, every time I try to flash something (whatever it is) it goes to bootloop...
Only fastboot and edl mode are working
If you have other links / combinations I would be happy to try
Click to expand...
Click to collapse
This is a little bit to late to the party but the latest both dev rom and global works for me with the latest me miflash. No problems what so ever. Seems like you're facing a hardware issue.
JD. A said:
This is a little bit to late to the party but the latest both dev rom and global works for me with the latest me miflash. No problems what so ever. Seems like you're facing a hardware issue.
Click to expand...
Click to collapse
Hi,
No, not too late my phone is still waiting, so thanks for your answer
Could you tell me witch version of rom / tool did you use?
I will try on a other windows computer to be sure there is no conflict with old tools I installed before.
If it works I will flash CM13 (marshmallow), I thought I should not use a too recent dev/global ROM before flashing CM13, but I don't remember were I read this. Is this true?
ROUGE13 said:
Hi,
No, not too late my phone is still waiting, so thanks for your answer
Could you tell me witch version of rom / tool did you use?
I will try on a other windows computer to be sure there is no conflict with old tools I installed before.
If it works I will flash CM13 (marshmallow), I thought I should not use a too recent dev/global ROM before flashing CM13, but I don't remember were I read this. Is this true?
Click to expand...
Click to collapse
I'm not home this weekend so I can't say for sure. gismoZ recommends using the 8.0.2 firmware or something like that can't remember, but the latest works just fine on my kate. The latest miflash is from 20200314 and just get the latest global rom and try to flash it.
I tried with an other windows computer, I successfully used last MiFlash version
But now, whatever I flash, ROM version or recovery version, it stay in bootloop when I power it.
I expect the eMMC memory to be faulty but why doesn't I have any error while flashing?
How to be sure this comes from the eMMC chip?
Some people have successfully changed it on the mediatek version of the phone:
https://fr-fr.facebook.com/16816505...c-kmvtu-done/1821360108117225/?_fb_noscript=1
https://translate.google.com/transl.../03/service-hp-xiaomi-redmi-mi-note-mati.html
If I go on this solution I have some questions before:
Must the eMMC chip be programmed before soldering it?
If not, can I program it with MiFlash once soldered?
If not, have I to use some special touch/contact on the mainboard to program it?
How to be sure of the chip model to buy?
Will the chip come already balled? Or have I to ball it before soldering it on mainboard?
Could I buy a 32GB chip instead 16GB original one?
Something else to test before going on this crazy last chance solution?
I bought a EDL flash cable, but I think I don't need it on this phone, I alway success to go to EDL mode from fastboot mode with a small batch script.
Hello ,
Any chance I could get an answer anymore or is my problem too specific maybe?