Devs,
Could any one dev help me to root and install custom recovery for my coolpad mega 3. It has MT 6737 chip android 6.0.
I would also like the to know it. There's no option to activate Root access in Developer menu directly in the phone. So probably the way is only via USB.
There is no method to root coolpad mega 3 with twrp or any custom recovery.
Hi friend, i have also coolpad mega 3 and i am writing this in my rooted coolpad device. So the question is , how i got root access. Actually rooting coolpad mega 3 was like winning god for me but fortunately i became sucessful in rooting this bloody device.
XDA community doesn't helped me in rooting my COOLPAD MEGA 3. I have rooted it with my own idea and brain.
So the steps are:
1. Download magisk manager latest version and install it in your coolpad mega 3.
2. Download stock firmware of your device.
3. Download vcom drivers and YDGP TOOL With SP FLASH TOOL. Remember all should be of latest version.
4.Install vcom drivers and after that extract your firmware in pc. It will be in the form of .CPB file.
5.Install YDGP TOOL and remember its installation folder. Now launch YDGP tool and on main screen click on select firmware then locate your firmware in pc then choose it. It will start verifying .CPB file and after that it will decompress .CPB file in the installation folder of YDGP TOOL under download folder.
6. Copy your boot.img from YDGP download folder to your coolpad phone storage. Then open magisk manager app and click on install ,then select the boot.img located to the place where you have copied it in phone storage. Click on select and then wait for the process. After that rename and save the patched boot.img to your phone storage. Now open pc and copy patched boot.img from phone storage to pc.
7.Now install and launch SP flash tool and login as developer. Switch of your Coolpad Mega 3.
8.Before above step you have to make a new folder in your pc which will contain scatter file with boot.img. Make a new folder in pc and name it coolpad3 . Go to YDGP INSTALLATION folder and open Download folder .IN Download folder open COOLPAD3053I folder. There will be a file named MtScatter.Txt.Copy it to coolpad3 folder. Also copy the patched boot.img to coolpad3.
Remember that scatter file and boot.img should be in same folder.
9.Follow step 7 and after that connect your switched off coolpadmega 3 to pc with the help of a good branded USB CABLE. Click on select scatter file in SP flashtool then it will load it and after that it will show you a menu having boot with a tick sign. Do not tick any other option. After that click on download button. If you are confused then you can search on google how to flash mediatek phones with SP flash tool.
10.It will flash boot.img patched with magisk to your phone. CONGRATS AFTER REBOOTING YOUR DEVICE YOU WILL HAVE A ROOTED COOLPAD MEGA 3.
YOU CAN CHECK IT BY MAGISK MANAGER THAT YOU HAVE INSTALLED FOR PATCHING BOOT.IMG .IF
both the option show install with a green tick in magisk manager that means your phone have been rooted.????
You can also check root status by installing rootchecker from playstore.
REMemBER THIS METHOD WILL WORK 100%.:good:
---------- Post added at 08:46 AM ---------- Previous post was at 08:37 AM ----------
XDA COMMUNITY WERE NOT ABLE TO ROOT COOLPAD MEGA 3. BECAUSE I HAVE ASKED HOW TO ROOT COOLPAD MEGA 3 TO MANY SENIOR MEMBER BUT THE ANSWER WERE EMPTY.
BUT AFTER THIS XDA COMMUNITY WILL KNOW HOW TO ROOT COOLPAD MEGA 3. I WOULD LIKE TO ASK XDA SENIOR DEVELOPERS "CAN THEY MAKE CUSTOM RECOVERY LIKE TWRP OR ANY OTHER " FOR COOLPAD MEGA 3 specially. IF YES THEN THEY SHOULD RELEASE CUSTOM RECOVERY FOR COOLPAD MEGA 3.
I AM WAITING. ???
step2?
from where do i download stick firmware. (step 2?
rohitwindows7 said:
from where do i download stick firmware. (step 2?
Click to expand...
Click to collapse
From google
Search for coolpad mega 3 stock firmware
CoolPadToolkit can be helpful to make root partly.
I needed to uninstall a lot of bundled apps so I used Root method by Magisk integrated in CoolpadToolkit.
Then I used KingRoot to delete apps.
Coolpad Toolkit
the only tool you want
coolpadtoolkit.wordpress.com
Related
my phone is
gionee Gpad_G2
help any expert. how cwm rom installation in my sdcard. i research in Google. and i read someone page i was trying to open this. recovery. img with mtk tool clockwork. mod but my mehod was wrong? here is no show. my recovery. option. only. for normal phone switch off. and on. it is work but recovery. not showing. i have no pc how to solve this problem without pc any help me pleace?
There are two easy ways:
1st Method
1. Install a app named ROOT MANAGER from play store (PLEASE NOTE THIS IS FOR ROOTED DEVICE ONLY)
2. If you have already rooted, after installing that app it will ask to install a custom recovery ie. CMW (ClockworkMod Recovery)
3. Before selecting CMW, ROM manager app will ask your device model select accurately and proceed to Download CMW and install it. It will ask for a reboot
4. You are Done
2nd Method: (You must have a Computer)
1. Try to Download the zip file of CMW of your device (zip file differs for device to device, So choose carefully your model)
2. Extract that zip
3. Go to Download mode (Power+ Volume down)
4. Install Software named ODIN v1.85
5. Open Odin and Connect your device to computer.
6. Flash the extracted file using Odin.
7. Done mate :thumbup:
itsmepawan said:
There are two easy ways:
1st Method
1. Install a app named ROOT MANAGER from play store (PLEASE NOTE THIS IS FOR ROOTED DEVICE ONLY)
2. If you have already rooted, after installing that app it will ask to install a custom recovery ie. CMW (ClockworkMod Recovery)
3. Before selecting CMW, ROM manager app will ask your device model select accurately and proceed to Download CMW and install it. It will ask for a reboot
4. You are Done
2nd Method: (You must have a Computer)
1. Try to Download the zip file of CMW of your device (zip file differs for device to device, So choose carefully your model)
2. Extract that zip
3. Go to Download mode (Power+ Volume down)
4. Install Software named ODIN v1.85
5. Open Odin and Connect your device to computer.
6. Flash the extracted file using Odin.
7. Done mate :thumbup:
Click to expand...
Click to collapse
there is no app called root manager it is rom manager and rom manager installs cwm only for a supported no of devices so you cant have cwm with rom manager on all phones
for the question you can try mediate cwm as it is a mediate processor phone search in xda
sangalaxy said:
there is no app called root manager it is rom manager and rom manager installs cwm only for a supported no of devices so you cant have cwm with rom manager on all phones
for the question you can try mediate cwm as it is a mediate processor phone search in xda
Click to expand...
Click to collapse
Hey sorry mate, I typed ROM MANAGER as a ROOT MANAGER in hurry.
Edit: Sorry for the mistake.
sir my device not show . rom manager. recovery. i select all devices. there which 1 model choose i confuse?
ommand: "/sbin/recovery" I:Checking for extendedcommand...I:Running extendedcommand...Waiting for SD Card to mount (20s)I:using /data/media, no /sdcard found.SD Card mounted...Verifying SD Card marker...SD Card marker not found...533aff7cfafd5547595aef04ad035cc1Error processing ROM Manager script. Please verify that you are performing thebackup, restore, or ROM installation fromROM Manager v4.4.0.0 or higher.I:using /data/media, no /sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue.. help me how. solve this problem without pc
.
.
abhilaab said:
Click to expand...
Click to collapse
I don't think that files are for your phone hence it will not work correctly
bro help help please. i try. of recovery.imgfind it G610s-u00-CWMrecovery-0715.imgworked to 1 problem that. 1st . Chinese language. in. but . 2nd i try. rom manager.find one device huwai transformer recovery flash.v5.8.2.0 installing zipthere. is. English. language. recovery. with clockwork. mod show. 1st. and 2nd.to missed problem.
. /data/media, no/sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. i find recovery.log. dir/root data/media clockwork. but. file not correctly. any expert. where is currently sdcard file how. found this file
abhilaab said:
bro help help please. i try. of recovery.imgfind it G610s-u00-CWMrecovery-0715.imgworked to 1 problem that. 1st . Chinese language. in. but . 2nd i try. rom manager.find one device huwai transformer recovery flash.v5.8.2.0 installing zipthere. is. English. language. recovery. with clockwork. mod show. 1st. and 2nd.to missed problem.
. /data/media, no/sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. i find recovery.log. dir/root data/media clockwork. but. file not correctly. any expert. where is currently sdcard file how. found this file
Click to expand...
Click to collapse
no offence but I don't understand what you said please be clear
try google translate my friend
sangalaxy said:
no offence but I don't understand what you said please be clear
try google translate my friend
Click to expand...
Click to collapse
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
abhilaab said:
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
Click to expand...
Click to collapse
Dont get mad friend with out any correct .img you cant flash your phone it will not succeed i think thats what happened in your case
Gionee is a china brand and it is a common problem with the chinese that you cant get any original firmware
---------- Post added at 10:41 PM ---------- Previous post was at 10:40 PM ----------
abhilaab said:
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
Click to expand...
Click to collapse
Dont get mad friend you have to find the correct img file without it it will not succeed
how found and my old original. boot .img. ya how bekup English language.
abhilaab said:
how found and my old original. boot .img. ya how bekup English language.
Click to expand...
Click to collapse
It is the problem with the china you cant get any original firmware for your phones anyway try google may be you can find something
any help me please
help me
Little help Please
Greetings,
I am trying to root my Galaxy Exhibit 2, I have copied the cwm mod zip file to my sd card, but when i boot into recovery mode i cant see the file.
I can see it from files on the phone and when im attached to my pc. What is the noob doing wrong?
Any clues would be greatly appreciated.
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
Guys, please help. I tried everything with Flash Tools and nothing. There are a few Russian sites that claim to have rooted it, but my Russian is simply zero.
Anyone?
Bootloader is locked too.
Your help will be much appreciated.
Do you still need root ? i kinda find a way how we can root every chinese phone if there is SP_Flash_Tool package for them.
how: ?
download : "HOMTOM-HT20-Pro-Android_6.0-R15-20180302"
unrar, inside are 21 file (atlest for me) , (dont delete original boot.img, make copy somwhere else, then delete it from homtomp package folder)
Then copy boot.img to your phone
download magisk manager, instal it, open magisk manager, press instal, chose Patch Boot Image File.
patched file need to be in downloads as patched_boot.img, copy it to HOMTOM-HT20-Pro-Android_6.0-R15-20180302 folder
rename it to boot.img (original boot.img alredy backuped in different location), replace original boot.img with patched boot.img .
use SP_Flash_Tool , you can flash all, or chose only boot.img (i used firmware upgrade, but if it not work, use download only)
then you shuld be able to instal magisk manager and acces root. Tested mydelf with homtom ht20 pro, all works, can spoof pokemons etc.
I am looking for flash file Homtom HT20 with android 7.0 or higher. Any help?
hello everyone ..... i will share the root trick without ubl (unlock bootloader)
this method only applies to root magisk only.
this trick I have tested with mobile phone huawei y5 2017 with android version 6.0
and xiaomi redmi note 3 mtk ..
what you prepare as follows:
1.Firmware same with your phone type (my recommendation is flash FW on your phone)
2.Boot.img from the appropriate firmware of your phone type
3.magisk manager
execution steps:
1. make sure the phone is connected internet
2. open the phone settings to activate usb debugging and install the source check from the outside in the security settings.
3. copy boot.img into sdcard on phone
4. install magisk manager application and open the application,
go to the settings on the top left and search "booted boot output format and you can choose according to your needs (if select img.tar, this works with Odin samsung). make your choice (if img = flash with fastboot or spflashtool, ufibox.
go back and select pairs and you will see 3 options "download zip, patch boot img file, install "
please select "patch img boot file" select file and search boot.img stored in sdcard and ok ... magisk manager will download automatically ... just wait until there is installation process is complete.
after finished you see its results in the internal memory in the folder "magisk manager"
there is a file named "patched_boot.img" that means success
copy patched_boot.img to laptop / pc and rename it to "boot.img" and flash it with the appropriate tool of your phone.
if boot.tar in flash with odin
if boot.img flash with spflashtool (if your chipset is mtk)
just install patched_boot.img your phone is rooted
thanks to @topjohnwu
I am sorry, my English is not good
*remember that all the risks in modification are at risk and I am not responsible for all your failures .....
thanks for visiting and hopefully to suc ...
Does this work with Sony Xperia X Performance (Android oreo) that has ubl no?
1. My Redmi 5 Plus/Redmi Note 5 India is rooted, using TWRP and Magisk
2. I would like to know if there is a way that recent updates under downloaded_ROM can be flashed using a third party application such as Flashify?
3. I have come to this decision because when I tried to reboot device for installing recently updates, my device enters the TWRP recovery only find nothing in there, which is annoying. Root cause for this mess is that Xiaomi's fastboot rom downloads page is download, which would usually be my go to method after all. Using Mi Flash Tool, and then a few command types re-root the recently updated mobile phone.
Please guide me!
If I understood well if twrp it´s not recognicing (not really, only it can´t access) your data partition you need to format data at first time after to unlock and install a custom recovery in order that twrp can access to your storage directory.
Flashify just is capable to install boot and recovery images. Maybe you meant FlashFire, then to install it tap on + button and a menu will display with some options like Flash ZIP or OTA.
SubwayChamp said:
If I understood well if twrp it´s not recognicing (not really, only it can´t access) your data partition you need to format data at first time after to unlock and install a custom recovery in order that twrp can access to your storage directory.
Flashify just is capable to install boot and recovery images. Maybe you meant FlashFire, then to install it tap on + button and a menu will display with some options like Flash ZIP or OTA.
Click to expand...
Click to collapse
you're right, brother. I meant FlashFire, when I typed Flashfire. My bad.
I have the OTA downloaded from the official website, since the file I had in the downloaded ROM folder always returned an error as corrupt file when tried to open using Winrar. So I had to go the official site and get the same downloaded to see the contents inside.
But now, having copied the file to the downloaded ROM folder on my phone, I do not see any option as how I can choose the file to get installed. I mean there is no file explorer option given to me, rather Google Drive option. Perhaps I have to have the file uploaded once again on to my Google Drive on my device?
sengottuvel said:
you're right, brother. I meant FlashFire, when I typed Flashfire. My bad.
I have the OTA downloaded from the official website, since the file I had in the downloaded ROM folder always returned an error as corrupt file when tried to open using Winrar. So I had to go the official site and get the same downloaded to see the contents inside.
But now, having copied the file to the downloaded ROM folder on my phone, I do not see any option as how I can choose the file to get installed. I mean there is no file explorer option given to me, rather Google Drive option. Perhaps I have to have the file uploaded once again on to my Google Drive on my device?
Click to expand...
Click to collapse
Download again the file from the same site, maybe downloaded to your Google Drive is corrupted and check that the extension didn´t change from .zip to .rar or FlashFire won´t recognice it. Winrar have to be capable to open it otherway the file is corrupted.
When you are sure that is the correct file If you had a stock recovery then you can install it through update option in settings/about device/updates from miui menu