I flashed aico n12.1 Feb 27 build,after this phone is not booting. Not entering into recovery mode.
I tried to flash stock ROM by qfil ,but USB drive not recognized.
pls help me how to recover my phone
thanks
Model lenovo vibe k5 a6020a40
hbtkmr said:
I flashed aico n12.1 Feb 27 build,after this phone is not booting. Not entering into recovery mode.
I tried to flash stock ROM by qfil ,but USB drive not recognized.
pls help me how to recover my phone
thanks
Model lenovo vibe k5 a6020a40
Click to expand...
Click to collapse
I am having the same issue.
Tried flashing it QSPT but gives damn sahara fail error
Never used qfil . But. Have you Tried reinstalling minimal adb and fastboot? That reinstalls the drivers. If you can find your device trough fastboot, you can go to recovery
Related
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNEx-tkoU1eacV3YJWSk3s0DdY0eAQ
i have lenovo sisley s90u 1gb ram and its bricked, its keep bootloop and when i try to enter recovery mode its just get "warning invalid image enter fastboot mode". i have download the firmware but still i cant flash it. please help me how to unbrick this sisley? sorry for my bad english.
juntax said:
i have lenovo sisley s90u 1gb ram and its bricked, its keep bootloop and when i try to enter recovery mode its just get "warning invalid image enter fastboot mode". i have download the firmware but still i cant flash it. please help me how to unbrick this sisley? sorry for my bad english.
Click to expand...
Click to collapse
You can't flash stock firmware because of driver is not installed on PC
Install your Chip set Driver on PC.
( I recommend You to install VCOM driver)
Same problem
Rajaks said:
You can't flash stock firmware because of driver is not installed on PC
Install your Chip set Driver on PC.
( I recommend You to install VCOM driver)
Click to expand...
Click to collapse
I have the same problem. I bought the phone and un-boxed it but it had a Wifi issue as the Wifi would not turn on no matter what i tried so i unlocked the bootloader and added custom TWRP and flashed a lollipop on it and now the Wifi is working but now cant get into recovery mode to flash gapps and all Im getting is: warning invalid image. enter fastboot mode so i need also to know how i can fix that can someone help
i have lenovo sisley s90u 1gb ram,i was updated rom by using lenovo mobile assistant moto. but after updating i can't use google play store ! please help me. how can i use google play store & other google app?
please mail me on: [email protected]
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
HadesGacheru said:
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
Click to expand...
Click to collapse
Well I had the same problem, am not an pro, and man u gotta understand, I opened device manager (Right click my computer, properties, device manager) then i realized that there was a new unknown device, I updated it from All MTK USB Driver 2014 i had downloaded earlier, then back to SP Flash Tool. and it completed the installation of my cutome rom
Hello guys,
I have a Lenovo a6000 plus with Stock Rom(4.4.4) and CWM based recovery-6.0.5.1 installed. I have a cwm backup of the stock rom.
I want to reboot to edl mode and backup the EFS partition(IMEIs, Baseband version, etc.) of my phone so I can be sure that I'm safe before I flash any other custom ROM. The Qualcomm HS-USB Diagnostics(COM ) driver showed up on pc only on edl mode(This happened much before when I lost the IMEIs and got my phone bricked later ).
So after I backup the qcn file, will I be able to exit the edl mode? And how to do so? I'm not proceeding unless I have all necessary backup with me safe.
And Thanks a lot for helping :highfive:
Hi,
My new Lenovo K5 a6020a40 stuck at boot loop ( enter to recovery mode) after OTA update.
Recovery show firmware version
A6020A40_S004_160830_ROW
Anyone know where or have link to download that firmware?
Its suposed to be very new release of firmware for that model.
I tried also with Lenovo SmartAssistant , but it show that cant find hw code which is 39 on my phone.
thanks