[GUIDE][PORTING][ROMs][MM&N]For lenovo A6000/Plus. - Lenovo A6000/Plus Guides, News, & Discussion

NOTE: IF YOUR PORT ROM IS 7.0 YOU NEED TO TAKE 7.0 ROM AS BASE ROM SAME FOR 7..1.1
TAKE FULL WORKING ROM AS YOUR BASE ROM.
TRIED TO MAKE GUIDE NOOB FRIENDLY DO COMMENT YOUR SUCCESFULL OR FAILER STORIES IN COMMENT SECTION.
so hiii guys so there a many nougat roms available for respected devices in this tutorial i will show you how to port nougat roms and mm roms
Not Tested for LP and KK ROMs​extract you base rom and port rom.
open your base rom>go to system folder>delete all files except built.prop and recovery-from-boot.p.>replace all files from port to base.(copy system folder of base rom to other place,you will need it for bug fixes)
--If port rom have files like system.new.data and ststem.trasfer.XXXX. and system.patch.dat use this tool:to extract it.:http://forum.xda-developers.com/and...ool-------unpack-repack-dat-img-v2-0-t3284806
--now you have to make some changes in boot.img
--Use andeoid image kitchen.
--Unpack boot.img of both port and base.
--now you have extracted both roms's boot.img in ramdisk folder copy int.environ.rc from port to base's boot.img.
--now repack boot.img of base rom.
--Now you have to reneame bootnew.img to boot.img
--delete boot.img from base rom and replace it.
--pack your base rom in zip file.
--flash it via recovery.​*[BUG FIXES IN NEXT POST]
THE SAME GUIDE I USE FOR PORTING ROM FOR OUR DEVICE.
THANKS TO @MR.HACKER5476---FOR THIS GUIDE
AND @mshoaib7 for helping me in bug fixes
also @The Hard Gamer for boot.img trick.

COPY FOLLOWING FILES FOR BUG FIXES.
FROM BASE ROM TO PORT ROM.
System/bin/sdcard
system/bin/mm-qcamera-daemon
system/etc/mixers_path_qrd_sukh
system/lib/libmmcamera_interface.so
system/lib/hw/lightsmsm8916.so,sensorsmsm8916.so,cameramsm8916.so
system/vendors/libs/*libactuator,*libchromatix,*libmmcamera,liboemcamera.so,libimscamera.so
YOU ALSO NEED DIFFERENT UPDATER SCRIPT.
YOU CAN PORT ROMS FROM REDMI 2 FOR OUR DEVICE AND ALSO FROM YU YUNIQUE

Craziest method ever and working always...

laddugaur said:
Craziest method ever and working always...
Click to expand...
Click to collapse
Thanks for your support.

thank you so much for this guide this work for me i have successfully ported beanstalk rom with no bug.. thanks alot..

soan0 said:
thank you so much for this guide this work for me i have successfully ported beanstalk rom with no bug.. thanks alot..
Click to expand...
Click to collapse
happy to help brother.

@MR.HACKER5476 Can MOTO E LTE (surnia) ROMs be ported to Lenovo A6000. Both have same SoC and surnia is having official support from all the dev teams from a long time. Though, we now have official support too, all thanks to dev_harsh1998.

sasukay said:
@MR.HACKER5476 Can MOTO E LTE (surnia) ROMs be ported to Lenovo A6000. Both have same SoC and surnia is having official support from all the dev teams from a long time. Though, we now have official support too, all thanks to dev_harsh1998.
Click to expand...
Click to collapse
we can port but ported rom have many unsolveable bugs..this method works for exact same devices like and moto e surnia is little different from our device.

MR.HACKER5476 said:
COPY FOLLOWING FILES FOR BUG FIXES.
FROM BASE ROM TO PORT ROM.
System/bin/sdcard
system/bin/mm-qcamera-daemon
system/etc/mixers_path_qrd_sukh
system/lib/libmmcamera_interface.so
system/lib/hw/lightsmsm8916.so,sensorsmsm8916.so,cameramsm8916.so
system/vendors/libs/*libactuator,*libchromatix,*libmmcamera,liboemcamera.so,libimscamera.so
YOU ALSO NEED DIFFERENT UPDATER SCRIPT.
YOU CAN PORT ROMS FROM REDMI 2 FOR OUR DEVICE AND ALSO FROM YU YUNIQUE
Click to expand...
Click to collapse
good guide . But i cant know what u mean . u said delete all files in system folder but why you said replace all files ( it already deleted )

1111111111111111111111 said:
good guide . But i cant know what u mean . u said delete all files in system folder but why you said replace all files ( it already deleted )
Click to expand...
Click to collapse
It means replace all files of system folder except build prop and recovery from boot.p from port to base

laddugaur said:
It means replace all files of system folder except build prop and recovery from boot.p from port to base
Click to expand...
Click to collapse
ok bro
Thanks for your rom , @The Hard Gamer

namterai2003 said:
ok bro
Thanks for your rom , @The Hard Gamer
Click to expand...
Click to collapse
Woah woah woah
Good work man.....
You ported it?

The Hard Gamer said:
Woah woah woah
Good work man.....
You ported it
Click to expand...
Click to collapse

Related

[Q] How to fix bluetoot bug/error on a ported rom

HI! can someone help me to fix a problem on ported miui rom? the only thing that doesnt work is the bluetooth. Iv'ed search anywhere in the internet and I found nothing. Can someone help me with this rom?
chrizsia_16 said:
HI! can someone help me to fix a problem on ported miui rom? the only thing that doesnt work is the bluetooth. Iv'ed search anywhere in the internet and I found nothing. Can someone help me with this rom?
Click to expand...
Click to collapse
Use Cm10 as base and take device similar to your device and look at miui patch rom source wen u port and all well be Good.
OptimusRs said:
Use Cm10 as base and take device similar to your device and look at miui patch rom source wen u port and all well be Good.
Click to expand...
Click to collapse
I cannot find my device in cm. Can I just copy the bluetooth files from a working rom to ported miui rom?
chrizsia_16 said:
I cannot find my device in cm. Can I just copy the bluetooth files from a working rom to ported miui rom?
Click to expand...
Click to collapse
What your Device?
OptimusRs said:
What your Device?
Click to expand...
Click to collapse
Its a My|phone a848i Duo / wiko Cink Slim I have a ported miui rom for this device and I am try to fix the Bluetooth.
chrizsia_16 said:
Its a My|phone a848i Duo / wiko Cink Slim I have a ported miui rom for this device and I am try to fix the Bluetooth.
Click to expand...
Click to collapse
copy this file from your base rom to your ported Miui Rom
this file located in lib/modules
1.mtk_stp_bt.ko
2.mtk_stp_bt_mt66xx.ko
khan_frd2002 said:
copy this file from your base rom to your ported Miui Rom
this file located in lib/modules
1.mtk_stp_bt.ko
2.mtk_stp_bt_mt66xx.ko
Click to expand...
Click to collapse
That is my problem.. There is no official 4.2.2 release for my device. I have a base rom but it's only jb 4.1.1 I tried looking for that file in there but I cannot find it. Is there any way that I can fix those two files?
Can anyone please help me?

[Rom+Kernel][25/12/15] Sakindia123's Custom Rom for Galaxy J7 v1.0

Hi,this is my stock based custom rom for Samsung Galaxy J7.
Kernel is compiled with UBERTC 5.3 toolchain(see kernel thread and github source for details)
Features:
Based on AOK8 stock rom
Rooted
Busybox
Custom Kernel(see my kernel thread for more info)
De-bloated
Knox removed
De-odexed
Zipaligned
Installation:
Copy rom zip to phone
Boot into recovery and wipe data
Flash using TWRP recovery
Download:
V1.0: https://www.mediafire.com/?aeul9sbs5hbee9o
Kernel Source: https://github.com/sakindia123/android_kernel_samsung_j700F
really a good work @sakindia123 but first we need install the kernel and then the rom or vice versa. thanks
thank you but no any pic pls
thanks brother.
i have ideas if you like :
messing miracast "screen cast" and galaxy note feature like multi window and camera app from s6 or note 5.
any news about cm13 brother. or it is dead end
Does this rom include stock Samsung music player?
Other than that! Hats off to you man. I'm glad we have a custom rom for the j7!
You should specify which model of j7 this rom is for!
animehawk82 said:
Does this rom include stock Samsung music player?
Other than that! Hats off to you man. I'm glad we have a custom rom for the j7!
You should specify which model of j7 this rom is for!
Click to expand...
Click to collapse
For Exynos-based models(F,H and i think M too).
Samsung music player is not included.
Screenshots please & is fheir any bug
Thumbs up for ur work but
Please bro some 6.0 marshmallow rom???
please do develop..
tanmay5 said:
Thumbs up for ur work but
Please bro some 6.0 marshmallow rom???
please do develop..
Click to expand...
Click to collapse
The dev said he is working on a Cyanogenmod 13 rom. Give him sometime. Developing a rom is not that easy!
I will check it bro and report. Thanks.
@ Sak
Any news about cm13 rom for j7???
Bro m eagerly waiting .....
please post soon
tanmay5 said:
@ Sak
Any news about cm13 rom for j7???
Bro m eagerly waiting .....
please post soon
Click to expand...
Click to collapse
Bro... Sak told us that is very difficult port cm13 in exynos chipset and apart from this he is very busy... so we must wait for samsung realease the 6.0 update for aur phone... and then probably sak can port cm13 for J7
Does this works on the Chinese Version? SM-7008 ??
screenshots
sakindia123 said:
Hi,this is my stock based custom rom for Samsung Galaxy J7.
Kernel is compiled with UBERTC 5.3 toolchain(see kernel thread and github source for details)
Features:
Based on AOK8 stock rom
Rooted
Busybox
Custom Kernel(see my kernel thread for more info)
De-bloated
Knox removed
De-odexed
Zipaligned
Installation:
Copy rom zip to phone
Boot into recovery and wipe data
Flash using TWRP recovery
Download:
V1.0: https://www.mediafire.com/?aeul9sbs5hbee9o
Kernel Source: https://github.com/sakindia123/android_kernel_samsung_j700F
Click to expand...
Click to collapse
provide some screenshots plss
Found a bug.
When you adjust the brightness then click "Outdoors" the phone will restart
Can we install this rom for J700H? Thank you.
o0oKodako0o said:
Can we install this rom for J700H? Thank you.
Click to expand...
Click to collapse
Yap it should work in j7h. Im using it
GianPacayra said:
Found a bug.
When you adjust the brightness then click "Outdoors" the phone will restart
Click to expand...
Click to collapse
This is an old bug... and it have in all version
What models does it work on
Does it work on the j700M
mlunabby said:
Does it work on the j700M
Click to expand...
Click to collapse
Yes bro... works perfectly

Installing Roms on any Android device by just knowning the processor?

Hello. I have doogee dg800 which has mt6582. I want to install lollipop rom.
and I would like to know if you could install on it or any android unknown devices by just knowing the processor which is mt6582?
if yes than can you send me a link of how you can do it?
Will someone knowledgeable answer this question please!!
Sent from my N9521 using Tapatalk
tnomtlaw said:
Will someone knowledgeable answer this question please!!
Sent from my N9521 using Tapatalk
Click to expand...
Click to collapse
ShOgIBaRiBoA said:
Hello. I have doogee dg800 which has mt6582. I want to install lollipop rom.
and I would like to know if you could install on it or any android unknown devices by just knowing the processor which is mt6582?
if yes than can you send me a link of how you can do it?
Click to expand...
Click to collapse
You Can't Simply Install ROMS on Just By Seeing The SOC Only.. .. There Are So Many Custom ROMs for MT6582 You should See The Kernel & Stock ROM of That Particular Device .. For Example Iam On MT6592 Running 4.4.x As Stock ROM With 3.4.67 Kernel & A Device With Same Kernel & Stock ROM But its MT6582 in That Case it Can Be Cross Ported & Used .. But When , The SOC is The Same(6592),Stock ROM is the Same(4.4.x) But the Kernel is 3.10.54 ..You can't Do That Even When the SOC(6592) is the Same as You Said ..it Can't be Done .. You need to see the Other Things Too(Kernel Especially) ..
Sent from my Nitro using Tapatalk
LoverBoy2415 said:
You Can't Simply Install ROMS on Just By Seeing The SOC Only.. .. There Are So Many Custom ROMs for MT6582 You should See The Kernel & Stock ROM of That Particular Device .. For Example Iam On MT6592 Running 4.4.x As Stock ROM With 3.4.67 Kernel & A Device With Same Kernel & Stock ROM But its MT6582 in That Case it Can Be Cross Ported & Used .. But When , The SOC is The Same(6592),Stock ROM is the Same(4.4.x) But the Kernel is 3.10.54 ..You can't Do That Even When the SOC(6592) is the Same as You Said ..it Can't be Done .. You need to see the Other Things Too(Kernel Especially) ..
Sent from my Nitro using Tapatalk
Click to expand...
Click to collapse
so I have mt6582
and kernel 3.4.67
Android 4.4.2
1. based by only two of those I can put any rom that I want?
2. in my karnel version I have something called "eng.release.1416304660" do I need it?
3. do I need build id?
4. do I need the java VM?
5. do I need kernel architecture? (armb7l)
thanks a lot for answering
ShOgIBaRiBoA said:
so I have mt6582
and kernel 3.4.67
Android 4.4.2
1. based by only two of those I can put any rom that I want?
2. in my karnel version I have something called "eng.release.1416304660" do I need it?
3. do I need build id?
4. do I need the java VM?
5. do I need kernel architecture? (armb7l)
thanks a lot for answering
Click to expand...
Click to collapse
What you are looking for can be found here. It takes patience but it pays off.
L3R0N said:
What you are looking for can be found here. It takes patience but it pays off.
Click to expand...
Click to collapse
sorry for asking too much question but I need to know so I won't have brick.
it says I don't need kernel while the other comment says I have to have the same kernel version.
ShOgIBaRiBoA said:
sorry for asking too much question but I need to know so I won't have brick.
it says I don't need kernel while the other comment says I have to have the same kernel version.
Click to expand...
Click to collapse
I don't really know how much the version matters. For example, I have never gotten a ROM built for the 2.6 kernel to run on my device which uses a 3.1 kernel version even though they both use the same SoC. However, I have gotten ROMs for kernel version 3.4 to run pretty fine on mine which is kernel version 3.1. Some will work and some will not. If you are going to try porting your own ROMs then its important to not be afraid of getting bricked...that happens. Porting is mostly trial and error until it works.
L3R0N said:
I don't really know how much the version matters. For example, I have never gotten a ROM built for the 2.6 kernel to run on my device which uses a 3.1 kernel version even though they both use the same SoC. However, I have gotten ROMs for kernel version 3.4 to run pretty fine on mine which is kernel version 3.1. Some will work and some will not. If you are going to try porting your own ROMs then its important to not be afraid of getting bricked...that happens. Porting is mostly trial and error until it works.
Click to expand...
Click to collapse
I have on my Chinese smartphone android 4.4.2 KitKat. I want to install 5.1 or 6.0.1 Rom.
I know the processor (mtk) and the kernel.
all I want to know is how to do it
ShOgIBaRiBoA said:
I have on my Chinese smartphone android 4.4.2 KitKat. I want to install 5.1 or 6.0.1 Rom.
I know the processor (mtk) and the kernel.
all I want to know is how to do it
Click to expand...
Click to collapse
What's your Kernel Version & MTK SoC ?
LoverBoy2415 said:
What's your Kernel Version & MTK SoC ?
Click to expand...
Click to collapse
MT6582
kernel 3.4.67
ShOgIBaRiBoA said:
MT6582
kernel 3.4.67
Click to expand...
Click to collapse
Then Port A ROM to Your Device, A ROM Which is For The Same SoC & Kernel & Stock 4.4.2..There Are So Many Custom ROMs for This Combo..
LoverBoy2415 said:
Then Port A ROM to Your Device, A ROM Which is For The Same SoC & Kernel & Stock 4.4.2..There Are So Many Custom ROMs for This Combo..
Click to expand...
Click to collapse
ok if I understood correctly Soc=processor.
kernel is the 3.4.67 version.
but do I really need stock? I mean I want to change my android version to 6.0.1.
I don't really understand what stock means but of what I understood stock is the companies rom? I don't want another android 4.4.2 kitkat I want 6.0.1 marshmellow.
XD sorry for so many questions. but thank you a lot for helping me
ShOgIBaRiBoA said:
ok if I understood correctly Soc=processor.
kernel is the 3.4.67 version.
but do I really need stock? I mean I want to change my android version to 6.0.1.
I don't really understand what stock means but of what I understood stock is the companies rom? I don't want another android 4.4.2 kitkat I want 6.0.1 marshmellow.
XD sorry for so many questions. but thank you a lot for helping me
Click to expand...
Click to collapse
Yes by Soc he means processor. Stock refers to the ROM your phone came with. If you want marshmallow, find another mt6582 device that is similar to yours which has M and try porting using the guide I pointed you to some posts back. The kernel you would use in this case is the kernel from your stockrom. You would of course need to modify it's ramdisk to try and get M to boot. As I mentioned before, it is trial and error and when doing this you must not be afraid of a brick.
L3R0N said:
Yes by Soc he means processor. Stock refers to the ROM your phone came with. If you want marshmallow, find another mt6582 device that is similar to yours which has M and try porting using the guide I pointed you to some posts back. The kernel you would use in this case is the kernel from your stockrom. You would of course need to modify it's ramdisk to try and get M to boot. As I mentioned before, it is trial and error and when doing this you must not be afraid of a brick.
Click to expand...
Click to collapse
thank you a lot LoverBoy2415 and L3RON, and yeah I am not afraid of brick. I have lg g3 and galaxy s3 and my doogee dg800 is an old smartphone and I want to learn those things.
you are really helpful and a nice people I clicked thanks on your comments and other's people comments who helped me, you said I need to modify it's ramdisk. how do I do that? is there any guide?
ShOgIBaRiBoA said:
thank you a lot LoverBoy2415 and L3RON, and yeah I am not afraid of brick. I have lg g3 and galaxy s3 and my doogee dg800 is an old smartphone and I want to learn those things.
you are really helpful and a nice people I clicked thanks on your comments and other's people comments who helped me, you said I need to modify it's ramdisk. how do I do that? is there any guide?
Click to expand...
Click to collapse
There are existing roms for your phone including CM12.1. See here. In you wanna diy then you'd need a tool to extract the ramdisk from the boot.img. I use Carliv Image Kitchen, it's available here on xda. You also need a tool like notepad++ to edit the files inside the ramdisk (init.rc and the rest). The idea is to compare the two and make changes to yours based on what's in the other (boot.img from the ROM you are porting) ramdisk. As I said, it's trial and error. If your device is really similar to another device as in they're basically identical twins then you can simply replace the boot.img with yours and modify build.prop to fit your device and you are good to go. But that's only if your devices are very very similar...like the Galaxy Tab 8.9 and the Galaxy Tab 10.1 they're basically the same device with some differences in their kernels hence you replace the boot.img in the ROM you are porting with one from your stock (modified accordingly of course).
ShOgIBaRiBoA said:
thank you a lot LoverBoy2415 and L3RON, and yeah I am not afraid of brick. I have lg g3 and galaxy s3 and my doogee dg800 is an old smartphone and I want to learn those things.
you are really helpful and a nice people I clicked thanks on your comments and other's people comments who helped me, you said I need to modify it's ramdisk. how do I do that? is there any guide?
Click to expand...
Click to collapse
See this Website MTKROMS , For Stable CM13 & CM12.1 & Based ROMs for 6582 & So Many New ROMs & You Will be Having All Guides for porting & so on in this & Join this MTK Facebook Group, to Ask Help Means Regarding Anything About MTK ..
Good Luck Mate, Welcome to the MTK World & Happy Porting..
thanks a lot guys
ShOgIBaRiBoA said:
thanks a lot guys
Click to expand...
Click to collapse
Welcome Mate..
#Anytime ? ✌..
LoverBoy2415 said:
Welcome Mate..
#Anytime ? ✌..
Click to expand...
Click to collapse
thanks @LoverBoy2415 for helping you help me too unknowingly :d ..
Sent from my A311 using XDA Free mobile app
DaniP619 said:
thanks @LoverBoy2415 for helping you help me too unknowingly :d ..
Sent from my A311 using XDA Free mobile app
Click to expand...
Click to collapse
..Thanks Mate ..
#Anytime..

Fast Rom V1 For S6 And S6 Edge User.

I want to present you the ROM , i decided to make my own rom and share with you, i hope can enjoy it.
Please let me know if you issues in my rom.
WaNt to know About Rom Cool Try It And enjoy Crazy Drive​
Rom Link Is Here​
Best Choice Rom (November Patch Stock Base Debloated)
Mega Link :
https://mega.nz/#!cMQQiAiT!Q9dBnUkB0x20fDf4thl1Nf3CJe6Ar1JC3ZkkUniX3Q4
MEGA Link :
https://mega.nz/#!MIZxVYJD!0UXIeUVleNEHgt8mvdb5NEaifmTCe4mpvLR9lo-gBtY
3minitStatusbar also work Fine with me.
Here you go.. : https://drive.google.com/file/d/0ByfO5lTWcqiQZzBNSXRUd0xfeFU/view?usp=drivesdk
Special Thanks To All Developer Just because Of them Its Possible ​
Ohh Yeah Its Time For Credit to Those who Help Me
1. Its Me Sugar ( @bunty_parona )
2 Joseph Adam (My Brother )
3 Mr Hai @haifish9999 ( My All Time Guide and teaching me to give respect and Help to Other )
4 @AlexisXDA
5 @Adam for kernel
6 User Of Universal Rom And Discussion Group For Support
7 All Developers..
For SomeUser want GraceUX app then here it is link
GraceUx : https://drive.google.com/file/d/0ByfO5lTWcqiQaFA1djdoX0QwV2c/view?usp=drivesdk
ChnageLog :
Changes With Respect to Other versions--
Support VoLTE
Support Wifi calling
Build.prop update
Optimisation of Database and Script too.
Etc. More.
You Can Join Me On Telegram Also..
If anyone having trouble of flashing roms or any other help you need join us on telegram we would glad to help you;
https://telegram.me/joinchat/CaccS0FaRRqAIH4jE0Sk4Q
NOW IT'S TIME FOR VoLTE FOR INDIAN USER.[just flash]
Here is Link :
https://drive.google.com/file/d/0ByfO5lTWcqiQOVJBOE8zNnZydTQ/view?usp=drivesdk
Thank You all Of You..
Sorry If i Forget to Mention Someone.
Installation Guide
1 flash rom
2 flash your custom kernel for Your Model
3 flash super su latest
4 reboot
5 Enjoy.
(stable rom 0 Bug )
Regards.
awsome bro great job:highfive::highfive::highfive:
Features?
Is this Alexis 7.2 Enhanced ?
moluntic said:
awsome bro great job:highfive::highfive::highfive:
Click to expand...
Click to collapse
Thank u my Bro...
feature
joso33 said:
Features?
Click to expand...
Click to collapse
Removable notification
Rounded recent and notification
Remove gray status bar in power save mode
Fast-Smooth-Stable
Csc tweaks
Build.prop
Init.d removed
Stable n more
ImChoey said:
Is this Alexis 7.2 Enhanced ?
Click to expand...
Click to collapse
Sorry ?
It looks the same as Alexis 7.2 Rom.
Btw, i just flashed your rom, i'm reading it while flashing,
i'm wondering why is it in czech republiic language during the installation in the twrp.
update script
ImChoey said:
It looks the same as Alexis 7.2 Rom.
Btw, i just flashed your rom, i'm reading it while flashing,
i'm wondering why is it in czech republiic language during the installation in the twrp.
Click to expand...
Click to collapse
Update script is set by joseph
I set system folder.
And no copied from Alexis rom
Waiting about review
What about Gear vr? Will it work on this Rom?
dinopeyton said:
What about Gear vr? Will it work on this Rom?
Click to expand...
Click to collapse
Yes just install gear apk or other rom add on package..
bunty_parona said:
Update script is set by joseph
I set system folder.
And no copied from Alexis rom
Waiting about review
Click to expand...
Click to collapse
Lol, when I don't think that a rom isn't copied, other people will do :,)
I think and I hope that you haven't copied, good work
yes just install apk and enjoy
dinopeyton said:
What about Gear vr? Will it work on this Rom?
Click to expand...
Click to collapse
Yes u cab work all things in rom
AlexisXDA said:
Lol, when I don't think that a rom isn't copied, other people will do :,)
I think and I hope that you haven't copied, good work
Click to expand...
Click to collapse
Yes i didnt copied as you know.[emoji1]
bunty_parona said:
Yes u cab work all things in rom
Click to expand...
Click to collapse
great. going to install
it s a stock rom with some modifications as kany others on xda..dsnt mean it is copied...damn u ppl
amazing work man.
very stable with great features
November patch ?
Also anyway to remove rounded recent and notifications ?
Diaze said:
it s a stock rom with some modifications as kany others on xda..dsnt mean it is copied...damn u ppl
amazing work man.
very stable with great features
Click to expand...
Click to collapse
Thank you for your lovely feedback..
[emoji1] [emoji1]
Sent from my SM-G925F using Tapatalk
Archmag3 said:
November patch ?
Also anyway to remove rounded recent and notifications ?
Click to expand...
Click to collapse
Noo its old beacuse its strong base rom..
Sent from my SM-G925F using Tapatalk
bunty_parona said:
Noo its old beacuse its strong base rom..
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Okk, thanks...Also anyway to remove the rounded notifications n recents ?

[CN3/L/P][MM/N] Rom Porting Script

Rom Porting Script
Hi guys. ?✌
a new mod for cn3 and cn3l and cn3p...
This reduces the wait time for users and upload time and data for porters...?
What is this..??
This inter ports the roms of Coolpad note 3 lite and plus.
(Only roms based on 3.18.xx kernel).
This means we can use any rom of the above 3 devices in any of them.
HOW TO USE
Flash the rom made for any of the 3 devices(Coolpad note 3, lite or plus).
flash all the patches given with the rom.
And then flash this script.
Select your device and select the kernel you want.
never allow reboot before flashing this patch.
Updated v3.1: Download
Downloads and Changelog:-
V 3.1 (Recomended)
upgrade patches added
Get V3.1 Here
V 3.0
Note 3 Plus support added
option to select stock and zero addition kernel for plus
re added kernel choice for note 3 and lite
mad and dot kernels for note 3 and lite
Go Here for V3.0
V 2.1:-
Option to select kernel removed
Dot kernel added by default.
get v2.1 from here
V 2.0:-
Now with aroma installer.
ZeroAddition kernel added.
Option to select ZA and stock kernel
find v2.0 here
ZeroAddition Kernel Thread :
Coolpad Note 3
Coolpad Note 3 Lite
Wanna use with dualboot..??
Patch this mod also with the rom.give same slot id as the rom.
Everything else same.flash the patched zip file after installing rom.
Warning Must Read
Dont try if u didn't understand what im saying.. -_-
Do never allow reboot before flashing this patch,it will definetely brick ur device and u will need an sp flash to recover ur device.
mechanism of working
replaces the kernel in boot.
replaces firmware and mddb.
edits build.prop and replaces codename.
This works on most of the roms based on 3.18.xx kernel.
(Most of nougat roms and all marshmallow roms).
it can save the wait time and data??
About Dot kernel:-
A custom kernel by Team ZERO(Dot os founders) based on MAD kernel source
Which is default kernel in Dot os.
Features:-
Upstreamed to 3.18.80
DT2W working
Performance and Battery optimised.
fast charging added.
Battery draining solved
f2fs file system supported on supported roms.
#Credits
Team ZERO
Team M.A.D
@Sam35sayan
@kuberrocks96
@varmadeepak
@Cooluserrr
Amit Kumar Singh
@mohancm
@amarullz for aroma
@Uday Hegde (me)
Awesome
kuberrocks96 said:
Awesome
Click to expand...
Click to collapse
Thank u
Good job.
Hope it will helpful for many!
mohancm said:
Good job.
Hope it will helpful for many!
Click to expand...
Click to collapse
Yahh..
Thank u bro for awsome kernel?
Waiting for next update and awsome features?
Gud work bro keep going
Another great job done by u bro
Great going bro ??
pintothakur007 said:
Gud work bro keep going
Click to expand...
Click to collapse
Thanks bro
varmadeepak said:
Another great job done by u bro
Great going bro ??
Click to expand...
Click to collapse
Tq bro...
great work bro:good:
praveendn said:
great work bro:good:
Click to expand...
Click to collapse
Thanx bro
Awesome +1
Nice work bro
How can i make something like this for my ulefone tiger?
What exactly is this and how do I use it in my cpn3l?

Categories

Resources