DESCRIPTION:
Hey guyz..... Me Hassan Mirza from Pakistan
Today am here with a new thread and I Have a good news for you....
As you know, the Rooting Methods didn't work with Latest Stable Nougat Firmware so,
on request of @franzyroy and @dexz, i port the new Elite Kernel from P9 Lite to your beloved Mate 8 CxxB56x build
With this you can flash anything and see in SYSTEM ! VIPER...adaway no systemless...etc...
DISCLAIMER:
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
Install:
1.) Download this Elite Kernel for Mate 8 v2 (B563 variant).
2.) Put in Root of SD Card.
3.) Flash this in Latest TWRP Recovery for Nougat.
4.) Install Phh Superuser from google play.
5.) And you are ROOTED.
This is the easiest method to Root Mate 8 by just flashing Boot file in Fastboot Mode,,, NO TWRP REQUIRED Like other METHODS
The file it's boot.img modded and signed for boot.
If you like, donate
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
CHANGELOG is in 2nd post
This is based on Stock Huawei kernel,,, Not compiled by Me...
Contributors:
@HassanMirza01
@phhusson
@BadWolfYe
Revolutions Tech (Revolutiontechs.co) thank you guyz.... i love you specially badwolf
Status:
Status: Stable
Stable Release Date: 2017-03-14
Created on: 2017-03-14
Last Updated on: 2017-03-23
CHANGELOG:
Elite Kernel for Mate 8 v1 (B563 variant): Initial release
Elite Kernel for Mate 8 v2 (B563 variant):, System will remained R/W all the time.... No need to use terminal again and again for mounting and editing system for Busybox, Adaway etc
HassanMirza01 said:
hank you guyz.... i love you specially badwolf
Click to expand...
Click to collapse
hahahaha i like this
Thanks! :good::good::good:
@franzyroy bro test it and tell me whats the condition as Mate 8 was having some more files in boot which needs additional editing....
HassanMirza01 said:
@franzyroy bro test it and tell me whats the condition as Mate 8 was having some more files in boot which needs additional editing....
Click to expand...
Click to collapse
You talk about of fstab f2fs file?!
@franzyroy i guess that one and one more file there was,,, some more system files were there too but they dont need to be touched... all done,,, until someone check this, we cant say anything that which file need to be corrected or placed....
franzyroy said:
You talk about of fstab f2fs file?!
Click to expand...
Click to collapse
i said this by comparing files with P9 lite's files... so there were many extra files
HassanMirza01 said:
@franzyroy i guess that one and one more file there was,,, some more system files were there too but they dont need to be touched... all done,,, until someone check this, we cant say anything that which file need to be corrected or placed....
Click to expand...
Click to collapse
HassanMirza01 said:
i said this by comparing files with P9 lite's files... so there were many extra files
Click to expand...
Click to collapse
Don't worry! I tell you this in relation to what I have seen. But nothing else.
---------- Post added at 20:10 ---------- Previous post was at 20:05 ----------
@HassanMirza01
What would be nice is that an unrooted guy test it. I am fully root now, and the week I can not afford to reinstall the firmware to check. Or so I unroot.
Edit:
I have to go now... See you soon... in the evening!
Okay no problem bro,,, here is midnight too.... Gudnite guyz... Stay blessed
Stupid question but what is Revolution Recovery and where would one find said recovery?
@Leo_83 sorry bro.... Let me correct it
HassanMirza01 said:
Okay no problem bro,,, here is midnight too.... Gudnite guyz... Stay blessed
Click to expand...
Click to collapse
Good night!
First of all congratulations @HassanMirza01 @BadWolfYe . Thanks for sharing your love to mate 8 users
I have tested your Elite kernel but it doesn't worked. It stucked at Huawei logo. Most probably your EK based on C432B560? Currently I'm using C636B563 firmware.
You might wanna look at C636B563 stock boot img.
https://mega.nz/#!StUAGQAD!QrMAkgUAvNONERDITly6fhGKUwARXqkbkM7ZlEjdwwA
Thank you. :good:
I will use B563 tonight,,, after 12h ETA,,, Stay tuned
HassanMirza01 said:
I will use B563 tonight,,, after 12h ETA,,, Stay tuned
Click to expand...
Click to collapse
Looking forward. :good:
HassanMirza01 said:
I will use B563 tonight,,, after 12h ETA,,, Stay tuned
Click to expand...
Click to collapse
I'm on C432B560 and I'm also stuck on the loading screen.
I can confirmed C185B560 also stuck at Huawei logo.
crazynitro said:
I'm on C432B560 and I'm also stuck on the loading screen.
Click to expand...
Click to collapse
dexz said:
I can confirmed C185B560 also stuck at Huawei logo.
Click to expand...
Click to collapse
@HassanMirza01
Like I said to @dexz via PM, a French friend has installed Elite kernel on a fresh L29C432B560 installation then installed PHH's superuser via Google Play. No bug for him but also no root. I think it could be due to our TWRP which isn't fully functional, at least in his case. In his case, a "Format data" was perhaps necessary to can install correctly this boot.
No.... No format data needed... Wait guyz... Let me check somethings more... It looks mate 8 has many more differences to P9 Lite.... Working on it.... Will post it ASAP,,,
Related
Removed
XDA:DevDB Information
alexega Project Note 8, ROM for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
alexega
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP, format data - Instsll Rom
Version Information
Status: Stable
Current Stable Version: No Bugs
Stable Release Date: 2018-02-14
Created 2018-01-27
Last Updated 2018-06-08
Fast, smooth, stable ROM !
Enjoy, Friends !
Downloading!!?
Downloading. So good ı see ?
same!
O_O pics look great! yay!
hi, is this single csc?
thanx
NO Oem unlock proBLEM ?
Good work man looks like very good. But how about samsung secure folder and samsung pass?
Full screen caller id mod?
Installing is fail ?
---------- Post added at 03:33 PM ---------- Previous post was at 03:30 PM ----------
Does anyone have uploaded it? I gave an error. can someone tell me who uploaded it?
aydin_taysi said:
Good work man looks like very good. But how about samsung secure folder and samsung pass?
Click to expand...
Click to collapse
To flash the rom you will need a custom recovery. Once you get custom recovery, bye bye KNOX. Once bye bye, KNOX, no more secure folder, Samsung pay.. or other KNOX related app.
aldinurhadiatiskandar said:
NO Oem unlock proBLEM ?
Click to expand...
Click to collapse
No PROBLEM !
aydin_taysi said:
secure folder and samsung pass?
Click to expand...
Click to collapse
On custom it does not work, so it's deleted.
Private mode is!
aaatso said:
Full screen caller id mod?
Click to expand...
Click to collapse
Yes ! New Full screen caller mod >>> in Rom by alexega !
Wow! Looking awesome, But I'm afraid to try it, because oem unlock issue.
Now I'm in Ironman, with magisk, and work well too.
I have never had the OEM toggle issue but it does not seem to be in DO for me now :-/
Very nice Rom though! Thank you!
I will report back once I have had time to play with it for a while.
Hi guys,
I still haven't done anything to my Note - N950F - Exynos, so I am stock now. Can you point me out to proper steps to get root and TWRP, so I can flash this ROM afterwards?
Thanks!
xchatter said:
Hi guys,
I still haven't done anything to my Note - N950F - Exynos, so I am stock now. Can you point me out to proper steps to get root and TWRP, so I can flash this ROM afterwards?
Thanks!
Click to expand...
Click to collapse
Dont need to root, just flash recovery with odin then flash the rom. Just follow the steps in the link below for flashing recovery.
https://forum.xda-developers.com/galaxy-note-8/development/unofficial-twrp-3-2-1-0-greatlte-t3722198
kanamor said:
Wow! Looking awesome, But I'm afraid to try it, because oem unlock issue.
Now I'm in Ironman, with magisk, and work well too.
Click to expand...
Click to collapse
Everything will be fine ! Do not worry, OEM - ok!
Can you
alexega said:
Yes ! New Full screen caller mod >>> in Rom by alexega !
Click to expand...
Click to collapse
Can you show me screen shot please
Hello! I want to offer you to help me make device tree for build custom rom LineageOS (14.1). At the moment I have already started work, but I can not finish it, because I'm still just learning. You can go to Github and make your commits, also wait in PM, Telegram or in other social networks / messagers. It's completely free, without registration and SMS!
Join us! :highfive:
ROM information:
OS version: Android 7.1.2_r36
Kernel version: 3.18.31 (stock)
Status: alpha
What's working:
Starting
Bugs:
Sound
Sensor Buttons
Lockscreen
SIM and more...
Requirements:
Unlocked bootloader
TWRP
Stock ROM backup
Installation:
1. Install TWRP
2. Download latest build
3. Wipe data/factory reset
4. Flash LineageOS
5. Reboot your phone
Downloads:
{Mod edit} (not tested)
Source code:
Manifest
Device Tree
Kernel
Vendor
Credits:
-HakerSEVA
-pirrat25
-andrwgldmn
-LineageOS Team
-DevelopedInside
-nikith290
First error.
Please make this happen!! I don't know anything about coding but I can try and fund coffee through PayPal(if I still have any money there...)
CyberDrag0n said:
Please make this happen!! I don't know anything about coding but I can try and fund coffee through PayPal(if I still have any money there...)
Click to expand...
Click to collapse
I don't need money,but those who can help with the creation of the device tree, because I just started it, but I can't complete it,because I'm not experienced in it.
JavaVOBIS said:
I don't need money,but those who can help with the creation of the device tree, because I just started it, but I can't complete it,because I'm not experienced in it.
Click to expand...
Click to collapse
I'll try and learn about that to help you with it. But I'm more of a hardware guy, not a software, ones and zeros...
New build in first post. Not tested.
Bro! Before flashing! Ain't bootloader unlock necessary? And TWRP needed? How'd you do that!?
the_phantom_97 said:
Bro! Before flashing! Ain't bootloader unlock necessary? And TWRP needed? How'd you do that!?
Click to expand...
Click to collapse
I don't know what stupid questions. If this is a custom firmware, then of course you need TWRP and unlock bootloader ({Mod edit}) .
JavaVOBIS said:
I don't know what stupid questions. If this is a custom firmware, then of course you need TWRP and unlock bootloader ({Mod edit}) .
Click to expand...
Click to collapse
Lol! Neva mind! I didn't see the *temporary bootloader unlock* post!! ?
Port Miui 9 Rom becoz miui is far better than lineage os
Port miui 9
Cyclic reboot. Something's not loading the system.
pirrat25 said:
Cyclic reboot. Something's not loading the system.
Click to expand...
Click to collapse
I'm working on it...
Jitender Baloda said:
Port miui 9
Click to expand...
Click to collapse
Maybe, but porting MIUI, I will not, because to port the firmware for the Qualcomm - it's hard.
the_phantom_97 said:
Lol! Neva mind! I didn't see the *temporary bootloader unlock* post!!
Click to expand...
Click to collapse
Okey, to install custom rom, you need to open the bootloader, but why did you write it? Did you hate that I didn't mention it in the post? If you have any suggestions on how to improve the first post to make it more informative, then you can write in PM.
Can You Make A Video On Lineage Os In Nokia 5
Make You Tube Video
@hikari_calyx do you think you can help with this project ?
Probably...
When the project finished, it may also work on Nokia 6.
Latest build working properly or not?
Jitender Baloda said:
Latest build working properly or not?
Click to expand...
Click to collapse
I don't have this device, so I can't say anything. We are waiting for feedback from testers. But I don't think it works, most likely again bootloop.
Jitender Baloda said:
Latest build working properly or not?
Click to expand...
Click to collapse
After booting the system, start screen, then error and again cyclic reboot.
Hello community! I hope you are well, today I bring you the Kernel Stock of Motorola, prerooted and with some minimal improvements and optimizations (I will gradually optimize it even more).
The only requirements are to have the bootloader unlocked and debug usb enabled (I have not yet tested on any device with the bootloader closed, if anyone wants to try you can send me a PM).
I hope you like it, greetings and good luck!
XDA:DevDB Information
Stock Oreo Kernel 8.1.0, Kernel for the Moto G5S Plus
Contributors
EmiAndroid, None
Kernel Special Features: Minimal Optimizations
Version Information
Status: Testing
Stable Release Date: 2018-11-05
Created 2018-11-05
Last Updated 2018-11-05
Download Link: https://drive.google.com/open?id=1GSNQgHsPNyGjSKBO7nxmUjOJBspj6BuC
How install? Easy.
1: On the PC, open the command console and then type "fastboot flash boot boot_magisk.img"
2: type "fastboot reboot system now" or "Start" in you device.
3: Enjoy!
Thank you. So ota should work ? about to give it a go
davekaz said:
Thank you. So ota should work ? about to give it a go
Click to expand...
Click to collapse
no,dont update with custom kernel
if u want update go to stock one and try
davekaz said:
Thank you. So ota should work ? about to give it a go
Click to expand...
Click to collapse
It is assumed that you should be able to update OTA without problems, since the kernel I made is the stock of Motorola with the Magisk patch, and according to the developer, its root application allows OT updates.
Is this for all g5s plus devices? I'm using a xt1803.
Swizzy88 said:
Is this for all g5s plus devices? I'm using a xt1803.
Click to expand...
Click to collapse
Yes bro
EmiAndroid said:
Yes bro
Click to expand...
Click to collapse
Okay I will try this. Do you have a list of changes and tweaks you made to the original kernel?
New Update!
Date: 2018/12/14
Changelog:
*Fix SafetyNet in Magisk (18.0).
*Fix Bootloop issues.
Link:
https://drive.google.com/open?id=1DDiIVK-GeRABS63ecg04XTKl1iho63Eo
How is battery backup ( screen on time)?
Why you make it prerooted? Whoever want it rooted they could flash magisk.
Thank you for your work.This is very good news for everyone who is on the stock of rum.Good luck with the core.
amritmalviya said:
How is battery backup ( screen on time)?
Why you make it prerooted? Whoever want it rooted they could flash magisk.
Click to expand...
Click to collapse
This kernel is designed for users who want root but do not want to use the TWRP, added to this, add some modifications that handle a bit better the work of the kernel, thus giving ... a better consumption of
Nagibator. said:
Thank you for your work.This is very good news for everyone who is on the stock of rum.Good luck with the core.
Click to expand...
Click to collapse
Thanks bro!
FP vibration
EmiAndroid said:
Hello community! I hope you are well, today I bring you the Kernel Stock of Motorola, prerooted and with some minimal improvements and optimizations (I will gradually optimize it even more).
The only requirements are to have the bootloader unlocked and debug usb enabled (I have not yet tested on any device with the bootloader closed, if anyone wants to try you can send me a PM).
I hope you like it, greetings and good luck!
XDA:DevDB Information
Stock Oreo Kernel 8.1.0, Kernel for the Moto G5S Plus
Contributors
EmiAndroid, None
Kernel Special Features: Minimal Optimizations
Version Information
Status: Testing
Stable Release Date: 2018-11-05
Created 2018-11-05
Last Updated 2018-11-05
Click to expand...
Click to collapse
This Kernal disable fp vibration on stock rom ??
Can this kernel be used only in stock or custom oreo?
amritmalviya said:
How is battery backup ( screen on time)?
Why you make it prerooted? Whoever want it rooted they could flash magisk.
Click to expand...
Click to collapse
It's my opinion that all ROMs should come pre-rooted, and leave it up to the user to un-root if they want - I think that way is 100x better.
Without root, it feels like it's not even your device, it's like you are carrying the device belonging to some other company, and they should pay you to use it. I honestly think it should be illegal to sell smartphones without giving root to the customers. Sure, you could turn it off by default, but it should at least BE THERE from the factory, with an option to enable it.
---------- Post added at 02:41 PM ---------- Previous post was at 02:39 PM ----------
Dhan... said:
This Kernal disable fp vibration on stock rom ??
Click to expand...
Click to collapse
Does it? I used to always disable this haptic feedback/vibration - but on this phone I found it's actually very cool - the vibration is such a high frequency that I found I like it now and changed my opinion, so I leave it on.
It's not so much as buzz/rumble, it's actually more of a "tone" that you feel now.
Can you please mention what changes u did in the kernel?
N can i flash it over twrp flashable oreo stock rom?
One request please.. Can we have something like this for our G5S plus
https://forum.xda-developers.com/g5-plus/themes/modcamera-aggressive-sharpening-noise-t3604458
Tengo instalado android 9, sirve para esta rom. Gracias
Can I use this with a custom rom?
If I flash this kernel with a custom ROM the phone won't boot...
:silly:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
ZainBilq said:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
Click to expand...
Click to collapse
when you finish testing :good::silly:
Will it include Mi9 in-display FP like in phhusson's AOSP?
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
Yeah I know...just like that....
This Rom work in Lenovo k5 pro? Is a device arm64 aonly.
any AB love ?
TheUndertaker21 said:
any AB love ?
Click to expand...
Click to collapse
they are soon testing it...:good:
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Excellent work !
Booted successfully on Huawei p10 lite after changing selinux/mapping/26.0.cil .
Except I have faced settings FC when opening Decor room in X-Tensions and I'm not able to make logcat due to ADB unauthorized
Thanks
android q activity animation available sir?
won't be able to bootup on mate 10 lite
flamedrops said:
won't be able to bootup on mate 10 lite
Click to expand...
Click to collapse
you test?
successfully booted up on my Lenovo S5 (K520/Seoul), but on the first setting screen after boot it shown missmatch vendor notice (it recommend to flash vendor img). i still could skip it and continue by the way.
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
luisgonzales1977 said:
you test?
Click to expand...
Click to collapse
yes, i use to try every other rom, now im on havoc and it works.
Boots up in Blu Vivo XI. Can't seem to get magisk to work with any gsi's. Thanks for the rom.
aljoscha81 said:
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Click to expand...
Click to collapse
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
surfer30 said:
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
Click to expand...
Click to collapse
I am on mokee as base installed as ever no further steps
Is there a chance to get an ARM32-A build? I would like to try this rom. Looks promising!
khuy21 said:
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
Click to expand...
Click to collapse
not need change vendor
just need set right fingerprint values in build.prop, some magisk modules may this
or search info and change it by hand
on short - fingerprint from system build.prop need to match values from vendor build.prop
gone
I NEED TESTERS FOR OTHER MODELS!
I am currently away from my PC and cannot recover my phone if something goes wrong, I will try this in a few days in my g920i .
QuadzHS said:
I NEED TESTERS FOR OTHER MODELS!
Click to expand...
Click to collapse
Ok I just tested it out, it works fine one my g920i(zerofltexx). Also if you don't mind can you share the device tree
santhosh ravi said:
Ok I just tested it out, it works fine one my g920i(zerofltexx). Also if you don't mind can you share the device tree
Click to expand...
Click to collapse
Thanks for testing!!! I will be posting the tree soon.
QuadzHS said:
Hey, new dev here, I only own the galaxy s6 Canadian and I need international testers, please drop a comment!
Info:
PitchBlackRecoveryProject For Galaxy S6 Canadian.
How to:
Flash the ZIP through TWRP
Bugs:
Flashlight Doesn't work only in recovery.
Always Backup Your Stuff
Download:
Click to expand...
Click to collapse
is this recovery able to deal with a treble-ized zerofltexx g920? or non-treble only? right now i am running the modded twrp version enes supplied with his treble-ize script.
screen said:
is this recovery able to deal with a treble-ized zerofltexx g920? or non-treble only? right now i am running the modded twrp version enes supplied with his treble-ize script.
Click to expand...
Click to collapse
i would not attempt it
source code?
edit: seems like pbrp is treble compatible out of the box lol
Can you give a link, please?