LG G2 mini d620r won't boot up after copy aboot - LG G2 Mini

Hello, by mistake I copy wrong aboot file to /dev/block/playform/msm_sdcc.1/by-name/aboot
It is possible to boot my phone or other way to copy proper file? What can I do?
Now I can't boot, can't charge, can't anything.

You didn't look very hard, did you?
Anyway: http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896

Vagelis1608 said:
You didn't look very hard, did you?
Anyway: http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Click to expand...
Click to collapse
It is possible to do it with charged battery?
I can see battery icon but my battery is charged and I can't get download mode so 3. and 4. not working.
How download mode looks like? Below image is download mode in LG G2 mini D620r ?
http://webtrickz.com/wp-content/uploads/2015/04/IMG_20150422_1322211.jpg
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.

k4misiek said:
It is possible to do it with charged battery?
I can see battery icon but my battery is charged and I can't get download mode so 3. and 4. not working.
How download mode looks like? Below image is download mode in LG G2 mini D620r ?
http://webtrickz.com/wp-content/uploads/2015/04/IMG_20150422_1322211.jpg
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
Click to expand...
Click to collapse
I have read all articles about wrong aboot and there is a hope. But first I need uncharched my battery somehow .
I'll tell you for some days if it works or not.

k4misiek said:
I have read all articles about wrong aboot and there is a hope. But first I need uncharched my battery somehow .
I'll tell you for some days if it works or not.
Click to expand...
Click to collapse
I read somewhere that someone with the same issue connected the battery with a LED and a resistor to discharge it. I don't remember what he did, nor do I recommend it, if you don't know what you are doing.

I connect LED to battery. It looks like this: https://ibb.co/f9PxgF
Now I am waiting for fully uncharged. This connection is enought to 0% ?

Done. I repair my phone, thanks very much!
Here is video. Battery 0% works!
https://www.youtube.com/watch?v=dPH6woDexcM&t=45s

Related

OMG! PLEASE HELP!! phone to pc screen!!

i commited the mistake of partitioning the sd card using rom manager.....so then i tried this http://forum.xda-developers.com/showthread.php?t=745547
flashed the EU version , then i strggled going into dowload mode again....i finally got into download mode using adb ...and when i was flashing it , it suddendly stopped and then the phone to pc symbol appeared
i dont know what else to do...i've been up all night and the phone is not even mine :'( please help
also my phone seems to be locked ....
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
stephenj37826 said:
Can you get phone into download mode? Install odin and all windows drivers. Take out batt plug up usb hold vol up and down and put in battery. If that doesn't work there is a cable you can but that might force it into download mode
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
i"ve tried that but no luck =/
Can you get adb to work?
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Mothafizzy said:
I had the same thing happen earlier, I was flashing back a stock ROM in Odin, which I have done before, and this time it was doing the cache files and the phone went black and removed from Odin, now this PC-Computer icon is up. Holding down the power-button just blanks for a second then puts back to the phone-pc screen, my phone was hardware locked so the power+volumes does nothing, and the computer won't recognize the phone in adb.
Click to expand...
Click to collapse
exactly....we are having the same problem....we cant do anything but watch that damn sign
did you fix it?
sadly mine was that way and I had to get it replaced
nomadrider123 said:
sadly mine was that way and I had to get it replaced
Click to expand...
Click to collapse
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
El Cipitio said:
so i guess if you soft brick a hardware lock vibrant ur out of luck?
so you called tmobile to get a replacement?
Click to expand...
Click to collapse
If you have tried everything twice and nothing worked .Don't mess around with customer services. You need to talk to tech services they got me a replacement
Download Mode trick.. it worked for me.
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
tee34life said:
Ok guys! here you go.... If you feel like you semi-bricked your phone and cannot boot into download mode.. there is a trick that might work for some or it might not doesn't hurt to try, but damn sure worked for me... Make sure phone is connected to computer with ODIN Opened,..
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone. IT SHOULD BOOT INTO DOWNLOAD MODE. if not sorry. Sometimes when people flash back and forth the up and down volume keys get reversed... so try volume down and power.. or volume up and power. GOOD LUCK!!!
Click to expand...
Click to collapse
No luck, currently going through a relentless trial-error process of different usb-battery-sim/sd-volume-power buttons. Just found out insurance which I thought was covered on my phone via Asurion through T-Mobile is only covering one of the phones on my line, yet I bought them both with warranties at the same time... Pretty bummed, Only is looking like paying the deductable fee for a new phone as if lost/stolen.. Hope something pulls through.
Just a small deviation
1. Take out the battery
2. Plug the USB into the phone
3. Plug USB into the PC
4. Hold down the Volume up/down + Power button with one hand
5. Put the battery back in with the other hand
6. Wait for the phone2pc icon to flash 2 times and on the second time when the screen goes black release only the POWER BUTTON
7. When you see the digging Android you can let go of the Volume buttons
That is the only way I could get it to work

Vibrant, Download Mode

I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Kennii said:
I've searched everywherem nothing worked, can some plz tell me how to put my vibrant in DL Mode so i can restore with odin3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=749413
if that doesn't work...
From here.. http://forum.xda-developers.com/showthread.php?t=848737
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
i can get into recovery mode but not dl mode, an my pc never recognized my phone via usb even when android worked
Kennii said:
i can get into recovery mode but not dl mode, an my pc never recognized my pc via usb even when android worked
Click to expand...
Click to collapse
Try my how-to...
Also, try pulling the battery, and then holding the Vol up+Vol dn keys, plug the usb cable in, then plug the battery back in..., make sure the usb cable is plugged into your computer...
Or.., if your phone is partially booting, then:
Code:
adb reboot download
i cant "power off" phone cause i cant boot android
Kennii said:
i cant "power off" phone cause i cant boot android
Click to expand...
Click to collapse
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Kennii said:
i think i have a hardware locked phone, i just got it today.
But i can get into recovery mode via hardware, so maybe i dont have hardware locked? and it IS possible to get to download mode on my phone via the buttons right?
Click to expand...
Click to collapse
Try here too, if that doesn't work for you...don't know what to tell you other than keep trying, you'll get in...
dasunsrule32 said:
10 seconds: hold power...
When the phone reboots to the Vibrant screen...
Press and hold: Vol up+Vol Dn+Power....
Wait for the Vibrant screen to reboot again...
Release Power... Download mode...
* Unfortunately, sounds like you've never setup adb or the sdk. I would recommed this...
Click to expand...
Click to collapse
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Kennii said:
when i did this i got recovery mode i'll try again.
where can i install this "adb" or "sdk" which ever ones easier?
Click to expand...
Click to collapse
http://developer.android.com/sdk/index.html
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
cvibe88 said:
1. Turn off device
2. Remove battery
3. Hold Vol up and Vol down (works best upside down)
4. Insert battery into device
5. Plug USB cable into device (also plugged into your computer)
Voila, Should enter download mode. Good luck!
Click to expand...
Click to collapse
when i do that the vibrant screen comes up and stays there
Kennii said:
and then what?
don't i need the pc to recognize my phone for this to work? and how would i do that if im stuck on the vibrant screen?
Click to expand...
Click to collapse
If you follow the steps your phone will enter download mode, In order for your PC to recognize what kind of device is plugged into it you need the samsung drivers. Which are here http://forum.xda-developers.com/showthread.php?t=728929
But im stuck on vibrant screen no OS is loaded
Kennii said:
But im stuck on vibrant screen no OS is loaded
Click to expand...
Click to collapse
Right, it sounds like you had a bad flash and your phone is stuck during boot
cvibe88 said:
Right, it sounds like you had a bad flash and your phone is stuck during boot
Click to expand...
Click to collapse
yes, so is that fixable?
Yeah definitely fixable, You just need to install the Samsung drivers onto your PC. Use Odin to flash a stock ROM onto your device and things should be better for you. I would suggest doing some research here on XDAand getting familiar with flashing a phone. Ive recovered from where you are now(a long time ago) this phone is very resilient. I have a thread over in the Q&A section with links to a video tutorial that I made for flashing a phone from stock, rooting, then all the way up to nero. Do a search on it, Good luck!
i just need to get into need to get into download mode and get odin to recongnize my phone and i should be good, it's such a pain! ;(. But THANKS for your help! I wish theres just ONE way to get into download mode.

Low Battery charge in Ap Fastboot Fix

Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
New Link
http://www.droidrzr.com/index.php/topic/2248-droid-razr-utility-16-contains-612181-fastboot-files/
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Great Job! Only wish that I knew about this 3 weeks ago! I took the back off and ended up glueing it back on and did a warranty exchange. I hope they don't say anything!!!
Again Great Job!!!!
Sent from my DROID RAZR using xda premium
pedrotorresfilho said:
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
As long as once it is plugged in and the screen comes up in the AP Fastboot it will work. Just hold power plues volume up and down then once that turns off immediatley press the volume up and down and it will boot you right to the boot menu. But just wondering what shows up for you if it is not the fastboot?
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
exactly. for those that got cut off as the phone was in the process of flashing, i dont think it will boot to any phone charging icon because there's no software on the device. I've been trying for a week now
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
dude your a life saver! thank you!!!
solution
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
mestisso79 said:
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
Click to expand...
Click to collapse
did you try the above tutorial? worked fine for me a couple hours ago
jaredakelly said:
did you try the above tutorial? worked fine for me a couple hours ago
Click to expand...
Click to collapse
Definitely didn't work. When that m logo comes up, it disappears and the screen goes off. The charging icon does not show.
Sorry for the late reply but it is good to hear this method to work for jaredakelly . For those who are having problems did you have the phone charging in the wall outlet and not on a computer usb? The best steps is to choose the the tools option then just let the phone boot to the m logo then just leave it there on the wall outlet. Make sure you are using the Motorola usb cable that came with your phone and its usb adaptor that might make a difference.
I just tried this tut and it works as far as I can tell I am at the screen for battery charging but there is a big "?" in the center, the phone doesnt know what level its at lol..
I suggest you space out and make your original steps in bigger and bolder text for the specific buttons because I almost missed the power + vol down + vol up and was just pressing the volume buttons
This thread should be stickied!
Yeah sorry if my instructions were not to clear this is my first time posting anything like this on this site, but I am glad to hear it is working for you too. I don't even have this phone lol , it was my friend's and he had it stuck on the fastboot so I messed around with it and in the end this was the result.
yep
i think my battery is too low to attempt this i got it on 3 times and tried to fastboot restore but battery kept dying before completion so i guess im just screwed
no you should be fine because as long as the power cable is still plugged in it should work regardless of the low battery level. I did this on my friend's phone with 0% battery.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
I have the same problem :/
This method worked for me! Your are the MAN OP!
Sent from my DROID RAZR using XDA
I think this should be stickied
Sent from my DROID RAZR using XDA
Well this got on xda front page
Sent from my DROID RAZR using XDA
Not a very good success rate for being on the front page. I'm going to try it later, though I think that I tried something like this before and it didn't work. I know that I have read this somewhere else.

Bricked LG G2 Mini, HELP!!!

Hey.
At the beginning I would like to apologize for my English.
I turn to you for help. The point is that today bynajmnije unlocked bootloader, so I thought, after the whole process I wanted to reset the phone but I have not turned on the Download mode and recovery does not work or not work,
What should I do ? The phone was rootowany Chinese program, the phone does not turn solely as connecting the charger and the batteries will stretch ojawia have a yellow question mark, I tried to connect the computer did not detect the Help !!!
LG G2 Mini
Android 5.0.2
kernel 3.4.0+
root
Custom recovery (does not work)
try this
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
and read post number one too
Help
panagiotisden2 said:
try this
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
and read post number one too
Click to expand...
Click to collapse
Hi, I do not know how to check if the battery is discharged, if you connect your phone to your computer without batteries it pops up a yellow question mark on the battery, I can not enter in no appeal to Download mode, can by LG Flasch Tool somehow I will do the trick?
rafaek123 said:
Hi, I do not know how to check if the battery is discharged, if you connect your phone to your computer without batteries it pops up a yellow question mark on the battery, I can not enter in no appeal to Download mode, can by LG Flasch Tool somehow I will do the trick?
Click to expand...
Click to collapse
tryed this?
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
did you tried this?
Sent from my LG-D618 using XDA Free mobile app
panagiotisden2 said:
tryed this?
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
Click to expand...
Click to collapse
This not work , only work Factory Data Reset but if i click yes Phone clean data but dont on , when 1 charge my phon for 1 % phone not at all stands , i try enter to download mode but i dont can ,

Bootloop and battery won't charge

so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
BlAckXpeRia said:
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
Click to expand...
Click to collapse
how can i remove the case to get the battery out of the phone? its not removable right?
uh. no one?
kuhaku319 said:
how can i remove the case to get the battery out of the phone? its not removable right?
Click to expand...
Click to collapse
You have to use a hairdryer. There are tutorials on YouTube.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
You have to use a hairdryer. There are tutorials on YouTube.
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
NatNikos said:
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
Click to expand...
Click to collapse
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
kuhaku319 said:
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
Click to expand...
Click to collapse
Maybe you should try it while plugged in also.
mr.loverlover said:
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
yeah i tried flashing it but the phone is totally dead, pc wont detect the phone because the phone is dead. that's the issue im facing now :silly:
NatNikos said:
Maybe you should try it while plugged in also.
Click to expand...
Click to collapse
tried, still bootlooped, when i hold power + vol up while plugged in, its powered on again and started bootlooping again
im just wondering. did u use flashtool to flash the ftf again?
Dilesh Perera said:
im just wondering. did u use flashtool to flash the ftf again?
Click to expand...
Click to collapse
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Dilesh Perera said:
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
Click to expand...
Click to collapse
mr.loverlover said:
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Click to expand...
Click to collapse
Solved
Apparently the driver is acting weird, but i uninstalled all z2 driver and reinstall them, all working and can be flashed
Thank you guys for helping me :fingers-crossed::highfive:

Categories

Resources