I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Files, fastboot and recoveries and bootloader unlock and super su for rooting
asus_t00n_twrp_2_7_1_1.rar https://mega.nz/#!355UmTCb!0Jn-0wlbGHG7lir8u9vq1l8BrR3dsepDdigqfJ9wRPk
twrp_2.8.7.0.rar https://mega.nz/#!GwRRBBjT!8ms39GK62XHairHOrxlmNJCwA-bDeaKA816Cg4lsQr0
Will this work for S Plus model?
It wont, using files from this thread might brick the device.
Sent from my SM-N910C using XDA Free mobile app
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
ChevanLemon said:
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
Click to expand...
Click to collapse
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is asus_t00n_twrp_2_7_1_1.img
If you are bricked, but you can still access fastboot mode, then you can unbrick and reflash stock firmware to your phone
First of all, Thank you so much for this GUIDE
Here are my doubts, and hoping for confirmation from you. My Padfone S is running well on latest kitkat firmware, rooted with SuperSu and TWRP 2.7.1.1 installed. Now, I wished to upgrade to Lollipop firmware.
Can I use the TWRP 2.7.1.1 to clean install the lollipop firmware instead of the stock recovery because I wished to wipe date, cache as well as SYSTEM before flashing?
My concern is I afraid if wipe the SYSTEM then the TWRP 2.7.1.1 would not be able to flash the Lollipop firmware successfully. Do I need to unlock bootloader in my case?
If I can do so, then can I still use the Flashify to flash TWRP 2.7.1.1 on the lollipop firmware, or I must use "fastboot flash recovery TWRP_2.8.7.0.img" method.
Thanks in advance for your kindly reply.:laugh:
Bootlooped
When I am upgrading my SuperSU and it requires a reboot,it automatically boot looped itself.
What should I do?
Linux4ever85 said:
Will this work for S Plus model?
Click to expand...
Click to collapse
Yes it work. Mine is Asus Padfone S Plus. Got bootloop problem. I have followed ninekaw guide. Thanks Ninekaw. U have save my precious padfone s plus
ninekaw9 said:
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Click to expand...
Click to collapse
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP --> link dead
Hi thank for your guidance on how restoring stock rom . Im having trouble detecting my phone when in fastboot mode, as you said to boot up into fastboot hold vol up and power and we will stuck at asus logo , but after i connect my pc and using adb cmd fastboot devices it didnt detect any devices and cant proceed to next step when i need to fastboot boot twrp 2.7.1.1
Currently im using twrp 2.8.7.0 , i want to use stockcrom because i need to use my padfone station (since any custom rom is not compatible with padfone station), any suggestions for this problem ? Thanks in advabce
So I accidentally booted up my device after wiping my ROM (I was going to install CM) and now I can't get back into TWRP to even access my backup. When I hold vol up I go into Huawei's eRecovery, on vol down it goes into the bootloader. I can't seem to get into TWRP anymore and fastboot doesn't seem to have the option to boot into recovery like adb does.
Found the stock ROM that I needed here: http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
can you
Code:
fastboot boot (your twrp.img)
?
yrbef91 said:
can you
Code:
fastboot boot (your twrp.img)
?
Click to expand...
Click to collapse
I'm not sure what I did but I got into TWRP but after wiping everything from fastboot (because I thought I would try to flash a ROM from there) so now I don't have my backup. Now I'm looking for a lollipop ROM (preferably stock) because I never got this to marshmallow and CM13 isn't flashing.
@BryanTheStrange
you should wipe first, then flash the ROM and GApps from TWRP.
I think you can restore to stock using dload folder method. There is a thread disscussing it.
No matter how I try to flash the TWRP recovery image to the recovery partition, TWRP gets replaced by the crappy stock recovery!! This is absolutely maddening!
Specifically, it seems that no matter what method to use to flash the TWRP recovery, it gets overriden by the stock loader when the phone reboots.
My bootloader is UNLOCKED and I've installed a custom rom just fine by using the command fastboot boot twrp.img to boot into the twrp image. This is the only way I'm able to use TWRP at all.
I've tried:
fastboot flash recovery twrp.img
Booting into TWRP, and flashing the image over the recovery partition
Flashify to flash the TWRP over the recovery partition from within the rom
Trying to flash cyangenmod's recovery from within the rom (was pretty desperate at this point..)
I've also tried many different versions of TWRP, I can boot into them just fine but none of them stick when I flash them to the recovery partition.
It always says it's successful when I try to flash it, I reboot into recovery, and it boots into the piece of crap EmUI stock recovery screen every time
Anyone have any pointers here? It's not the end of the world but it's pretty aggravating having a completely useless recovery if I'm not near a computer,.
Try using Flashify or Flashfire.
Sadly didn't work. It doesn't seem to matter how I flash the recovery, the bootloader replaces it with the stock recovery when it boots. I'll update the OP to clarify, but thank you
I am having same issue have you found a fix
Have you tried starting completely over? Like, downloading the official MM build (b331, C564D003) from Huawei (Assuming you're on L24)?
On the new, freshly installed ROM, make sure that USB Debugging is and enable OEM Unlock are on in the developer settings.
Then, try flashing this build of TWRP again.
Before rebooting, do a Cache/Dalvik Wipe.
Boot up into the stock rom, then use 'adb reboot recovery' to see what happens next. It should work...
Hi mate,
It'd be easier to help you if you could post a screenshot of your FASTBOOT screen. There will be a line that will say FRP=LOCKED/UNLOCKED something like this.
if it is locked,
you have to install stock rom & enable OEM unlock from setting.
Then relock the boot loader. Then again unlock the boot loader.
For myself, I unlocked my BL unofficially, & this problem occurred . I solved it this way...
Hope it helps.
Cheers!
I'm new to the 7X (L24) so perhaps I'm preaching to the converted, so please correct any errors and/or add more info....
On the L24, I've tried booting TWRP without replacing the stock recovery (using fastboot boot TWRP.img) so that I can first make a backup of the stock recovery. With FRP and bootloader unlocked, I receive something like "remote -- command failed".
From the Honor 7 Forum,
inside!out said:
It's very simply! We have 2 recovery partition. First - Recovery, Second - eRecovery. eRecovery isn't useful.I tested flashing TWRP in second partition. Its work!
Click to expand...
Click to collapse
18-03-19 update: Got a little braver since others have kindly posted stock recovery and stock ROM for the L24, so I've flashed TWRP (from https://forum.xda-developers.com/honor-7x/how-to/how-to-root-honor-7x-international-t3716056 to recovery2. (Upon booting up TWRP, the title screen shows TWRP 3.1.1.0 OpenKirin edition.)
As a result, I found out I was mistaken about the abd reboot commands.
adb reboot recovery boots to EMUI stock recovery.
fastboot flash recovery2 TWRP.img actually flashes to eRecovery so ...
adb reboot erecovery actually boots into TWRP
If you've unlocked your bootloader and press Vol-UP when the orange security warning screen appears, you get into the download stock recovery and stock ROM to bring the 7X back to secured state screen. (But currently, it can't find stock firmware.)
So right now, stock recovery is in recovery1 and TWRP is in recovery2/eRecovery. For those who can't get OTA updates because they've flash TWRP on recovery1, some kind souls have posted their stock recovery in this forum. (or try to move recovery2 back to recovery1 if you haven't flashed both recoveries.)
iammudd said:
I'm new to the 7X (L24)
Click to expand...
Click to collapse
Use our Multi-Tool, your model in Extended Support
bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
------------------UPDATE---------------------------------
i am able to flash android 8.1 and run it but anything later then that reeboots to fastboot. cannot update from stock updater too. if i flash any firmware of PIE or later then it reeboots to fastboot.
rabin18181818 said:
bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
Click to expand...
Click to collapse
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.
Retrial said:
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.
Click to expand...
Click to collapse
nope nothing
rabin18181818 said:
nope nothing
Click to expand...
Click to collapse
Okey, check the guide clean install official stock rom(to unbrick ur device) and then follow the guide clean install custom rom.