LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
SUPPORTED DEVICES
Honor 4X
CHE2-UL00
<MOD EDIT - Unsupported Models removed.>
CHE2-L12
CHE2-L23
CHE2-TL00
CHE2-TL00M
P8 Lite
ALE-L01
ALE-L02
ALE-L21
ALE-L23
ALE-TL00
ALE-UL00
Honor 4c
CHM-CL00
CHM-TL00H
CHM-UL00
CHM-U01
G play mini
CHM-U01
CHC-U03
CHC-U23
G Play
G735-L03
G735-L23
Y6II
CAM-L03
CAM-L21
CAM-L23
Honor 5A
CAM-AL00
CAM-TL00H
CAM-TL00
CAM-UL00
CAM-L21
BUGS
Bluetooth
And minor bugs
HOW TO INSTALL LINEAGEOS
- Install any firmware MM for p8 lite or honor 4c
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP. (see Downloads)
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- IMPORTANT: Do a Factory Reset. (Wipe data & cache)
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
Click to expand...
Click to collapse
HOW TO INSTALL TWRP
- Allow oem unlock
- Power off
- Hold Volume down + Power for Fastboot mode
- fastboot boot twrp.img
- adb push twrp.img /sdcard/
- Choose "Install" and then "Install Image"
- Select twrp.img
- Select Partition "Recovery"
- Confirm Flash
- Reboot to recovery
Click to expand...
Click to collapse
DOWNLOADS
LineageOS14.1
removed
THANKS TO
@DanteFX™
@ROM-PacMe
Team-Panther
OpenKirin-Team
TEST
@flxtremo
@Jarabe GPM
@Loopeez
@p4ulc4stillo
And GPM LATAM Group
SUPPORT ME
I hope kindly your appreciation (button below :good: ) thank you vey much
So, to install it on my y6ii/gw, I have to install a p8 Lite firmware first? I didn't knew this was possible
ferpunk said:
So, to install it on my y6ii/gw, I have to install a p8 Lite firmware first? I didn't knew this was possible
Click to expand...
Click to collapse
Yes, install P8 Lite firmware
Honor 4C CHM-U01
Installation on Honor 4C fails in TWRP 3.1.0.0 aborted 7
It can be done just like installing any other firmware for my y6ii? Sorry but this is my first Huawei phone mad I want to know exactly what I'm doing
mishinev said:
Installation on Honor 4C fails in TWRP 3.1.0.0 aborted 7
Click to expand...
Click to collapse
Install any P8 Lite firmware or CAM firmware
ferpunk said:
It can be done just like installing any other firmware for my y6ii? Sorry but this is my first Huawei phone mad I want to know exactly what I'm doing
Click to expand...
Click to collapse
Not, unlock bootloader and install twrp, make a nandroid backup, make full wipes and flash this rom
DanteFX™ said:
Not, unlock bootloader and install twrp, make a nandroid backup, make full wipes and flash this rom
Click to expand...
Click to collapse
I mean to install the p8 Lite firmware, for this one it's everything clear also, you tell the other guy to install a CAM firmware, so it is possible from that one too?
ferpunk said:
I mean to install the p8 Lite firmware, for this one it's everything clear also, you tell the other guy to install a CAM firmware, so it is possible from that one too?
Click to expand...
Click to collapse
Ooh, sorry sorry, yes it's just like installing any other firmware
I have CHC-U01C432B503 (G Play Mini), what exactly do I have to do to install this firmware? I have bootloader unlocked, TWRP recovery installed. And also, if I want to revert back to my stock firmware will the Nandroid backup do it? Because I read on another forum that a Nandroid backup is of no use if I flash a custom ROM on my device.
The following text was copied from a Nandroid backup tutorial on CyanogenMod forum.
"CAUTION:
A nandroid backup will not be helpful if you are planning to migrate to a different ROM permanently. What I mean to say is, lets say you are flashing a Custom ROM which you already know that is stable and you can carry on using the new ROM then this nandroid backup will not be helpful. Instead you need to use Titanium Backup or Backup all data individually and then migrate all the data to the new ROM."
Hello, I'd appreciate it if you could add credits to the OpenKirin team, since I believe that you are using some of our work here.
Thanks!
XePeleato said:
Hello, I'd appreciate it if you could add credits to the OpenKirin team, since I believe that you are using some of our work here.
Thanks!
Click to expand...
Click to collapse
Yes!, If it is okay
When source code will be available?
Hi, could anyone give a picture of the Antutu Benchmark on the P8 Lite? Camera, HWC and 3D works?
Honor 4c still error 7 (i try cyanogen & honor 4c firmware mm).... huawei p8 lite cant install for my phone
DanteFX™ said:
Install any P8 Lite firmware or CAM firmware
Click to expand...
Click to collapse
Excelente ROM!
Muy buena ROM Dante, tiene unos fallos menores pero con un poco de tiempo y paciencia se pueden arreglar, felicidades por tu ROM Dante, se agradece! :good::good::good::highfive:
can't use sd card as external storage
DanteFX™ said:
Yes!, If it is okay
Click to expand...
Click to collapse
ROM is very Good....thanks to the creater but we have one main bug we cannot use SD card as external storage, only it can be used as portable storage
Glory 4x che2-Ul00 can not brush
Will be stuck in Huawei p8 youth version of the first screen, ask for a quick adaptation of the glory 4x, thank you!
What about CPU usage? Is that rom using only 1 core or more? Is camera and video playback working?
And if I have honor 4c CHM-U01 do i need to flash first p8 lite firmware?
@DanteFX™ Congratulations on the ROM. Well done. I want to try it on my Che2-L11, but one small question: What are the known bugs? Can you give some details? F.ex. what about dual sim? Video?
Related
Good morning,
I would really appreciate some hints to solve my Problem with Honor 5X and Lineageos 14.1.
What have I done so far:
Bought a Honor 5X -> success
Unlocked bootloader officially -> success
Installed TWRP newest Version -> success
Downloaded lineageps 14.1 newest for kiwi -> success
moved lineageos zip to phone -> success
boot into recovery -> success
wipe Cache / etc -> success
install zip for lineageos 14.1 -> error 7
From reading a little bit here, I got the idea, that the bootloader is too old for lineageos 14.1. I am not an Honor Expert, but the phone Show something lime emui 3.something.
What do I have now:
Phone with:
running twrp
running fastboot
What I do not have:
adb backup of phone
twrp backup of phone
I would like to have the phone back up and running, even stock Image would be fine. Lineageos prefered.
Kind regards
Tokoloshe
tokoloshe4711 said:
Good morning,
I would really appreciate some hints to solve my Problem with Honor 5X and Lineageos 14.1.
What have I done so far:
Bought a Honor 5X -> success
Unlocked bootloader officially -> success
Installed TWRP newest Version -> success
Downloaded lineageps 14.1 newest for kiwi -> success
moved lineageos zip to phone -> success
boot into recovery -> success
wipe Cache / etc -> success
install zip for lineageos 14.1 -> error 7
From reading a little bit here, I got the idea, that the bootloader is too old for lineageos 14.1. I am not an Honor Expert, but the phone Show something lime emui 3.something.
What do I have now:
Phone with:
running twrp
running fastboot
What I do not have:
adb backup of phone
twrp backup of phone
I would like to have the phone back up and running, even stock Image would be fine. Lineageos prefered.
Kind regards
Tokoloshe
Click to expand...
Click to collapse
I guess you are still on emui3, so lollipop version Android 5.
First: update to a marshmallow Android 6 version, BUT NOT the most recent. Check with update what is the version proposed and give number here.
But you need stock recovery for that...
You should:
Unlock bootloader
Update software/Fw to Android 6 , emui 4, bxxx version <= b340.
Boot in twrp recovery : make nandroid backup1
Flash twrp recovery, flash root, check all OK and make backup2
Then with both backups, you re safe to play with custom roms.
Some more questions....
rodolphe06 said:
I guess you are still on emui3, so lollipop version Android 5.
First: update to a marshmallow Android 6 version, BUT NOT the most recent. Check with update what is the version proposed and give number here.
But you need stock recovery for that...
You should:
Unlock bootloader
Update software/Fw to Android 6 , emui 4, bxxx version <= b340.
Boot in twrp recovery : make nandroid backup1
Flash twrp recovery, flash root, check all OK and make backup2
Then with both backups, you re safe to play with custom roms.
Click to expand...
Click to collapse
Dear Rodolphe,
thanks a lot for your help.
Could you please give me some more hints?
My bootloader is already unlocked and TWRP is up and running. So far, that is done.
The phone runs now TWRP and fastboot only, nothing else.
How do I do this task: Update software/Fw to Android 6 , emui 4, bxxx version <= b340
I guess download this b340 fw/sw as a zip and install via TWRP?
Kind regards
Tokoloshe
tokoloshe4711 said:
Dear Rodolphe,
thanks a lot for your help.
Could you please give me some more hints?
Tokoloshe
Click to expand...
Click to collapse
Hi, you must return to stock recovery. Find the thread honor5x depot and get it based on model.
Then i think once stock recovery reinstalled, you can update in emui via settings>about phone.
What is **** is, if you update too much, you wont be able to flash ROM because of volte Fw. Thats why you need to check bxxx version of update to be sure to be less than b350.
Otherwise, you need to update manually with for example application firmware finder (playstore). Dont hesitate to search in threads your case. Some people may have face same request/issue
Yahooooooooo!
Partially Success!
What happened:
Read Guide KIW-L24 Back to Stock + Android 6.0.1 MM Update by clsA
Downloaded Twrp_Back_to_Stock_with _Stock_Recovery.zip
Put it on SD Card (which took a long time and needed some patience)
Boot into recovery TWRP
Restore
Reboot
There we are back in operation.
Phone says:
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
How should I continue?
I would like to
finally reach lineageos 14.1
will not loose voLTE Options etc by wrong firmware / baseband etc.
Update says no update available? I guess there is a way to install original Honor 5X Android 6?
Thanks a lot for the help already!
Greetings
Tokoloshe
tokoloshe4711 said:
Yahooooooooo!
Partially Success!
What happened:
Read Guide KIW-L24 Back to Stock + Android 6.0.1 MM Update by clsA
Downloaded Twrp_Back_to_Stock_with _Stock_Recovery.zip
Put it on SD Card (which took a long time and needed some patience)
Boot into recovery TWRP
Restore
Reboot
There we are back in operation.
Phone says:
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
How should I continue?
I would like to
finally reach lineageos 14.1
will not loose voLTE Options etc by wrong firmware / baseband etc.
Update says no update available? I guess there is a way to install original Honor 5X Android 6?
Thanks a lot for the help already!
Greetings
Tokoloshe
Click to expand...
Click to collapse
Download Marshmallow firmware manually (Google or use Firmware updater app/site) and install it via dload or via EMUI updater (5.1.1 has an "Upgrade manually" option). That's a KIW-L21? You won't get VoLTE anyway, install whatever you find for it (latest I know about is B350 CUSTC432D003, available on Polish Honor site). After that, flash TWRP and flash whatever you want.
Yahoooooo and thanks a lot again!
I have found the danish update.app for android 6, put it on MicroSD and installed it with the update app.
Now the phone
runs on Android 6.0.1
is Kiwi L21
is EMUI 4.0
is Baseband 20234,20234.
Will installing lineageos14.1 on top of this work or would I get Error 7 again?
I am a bit careful after the first try with lineageos14.1 and EMUI 3.1.
Kind regards
Tokoloshe
tokoloshe4711 said:
Now the phone
runs on Android 6.0.1
is Kiwi L21
is EMUI 4.0
is Baseband 20234,20234.
Tokoloshe
Click to expand...
Click to collapse
What is your bxxx version ?
Pictures posted above are in too low resolution to be red....
But now you should boot in twrp to make a nandroid backup of all stock with adb (find in threads).
Then you flash twrp and backup again with twrp and emui.
So in case of issues you re covered. Then try flashing los
Check hère:
https://forum.xda-developers.com/showthread.php?p=72838513#post72838513
tokoloshe4711 said:
Yahoooooo and thanks a lot again!
I have found the danish update.app for android 6, put it on MicroSD and installed it with the update app.
Now the phone
runs on Android 6.0.1
is Kiwi L21
is EMUI 4.0
is Baseband 20234,20234.
Will installing lineageos14.1 on top of this work or would I get Error 7 again?
I am a bit careful after the first try with lineageos14.1 and EMUI 3.1.
Kind regards
Tokoloshe
Click to expand...
Click to collapse
B330-B340 firmware? You're good to go.
ShadySquirrel said:
B330-B340 firmware? You're good to go.
Click to expand...
Click to collapse
B340 will be ok? The update app offers an OTA with B340.
Now I have a proper TWRP and Adebar backup (adb Linux script framework).
I will give Lineageos 14.1 a try in the next days.
Thanks a lot for the good hints.
Bye bye
Tokoloshe
tokoloshe4711 said:
B340 will be ok? The update app offers an OTA with B340.
Now I have a proper TWRP and Adebar backup (adb Linux script framework).
I will give Lineageos 14.1 a try in the next days.
Thanks a lot for the good hints.
Bye bye
Tokoloshe
Click to expand...
Click to collapse
Any non-VoLTE Marshmallow firmware will be OK. My KIW-L21 was on B350D003 before flashing, everything is great.
Finally ! Lineageos
ShadySquirrel said:
Any non-VoLTE Marshmallow firmware will be OK. My KIW-L21 was on B350D003 before flashing, everything is great.
Click to expand...
Click to collapse
Hi everybody,
it is done! The Honor 5X now runs on Lineageos.
Thanks a lot for the help and the good hints.
The reason for the problem with EMUI 3.1 and Error 7 was not obvious to me. I have read some installation guides and many of them ignore that you cannot install lineageos 14.1 up on EMUI 3.1. Good luck I found this forum.
Bye bye
Tokoloshe
tokoloshe4711 said:
Hi everybody,
it is done! The Honor 5X now runs on Lineageos.
Thanks a lot for the help and the good hints.
The reason for the problem with EMUI 3.1 and Error 7 was not obvious to me. I have read some installation guides and many of them ignore that you cannot install lineageos 14.1 up on EMUI 3.1. Good luck I found this forum.
Bye bye
Tokoloshe
Click to expand...
Click to collapse
Great! Welcome onboard on custom ROM.
I would suggest you RR,aex or crdroid if you want extra features. Of course backup your los first
Install KIW L21 B320 stock
Flash twrp
Nandroid backup
Wipe cache, dalvick cache, system, data
Flash lineage
Reboot then flash gapps and SuperSU or magisk
You will have no problems with this method
Here are OEMs that I collected online and would like to share with you guys for playing with changing regions on the device for testing (please bear your mind in bricking your H5C if you make it by yourself - plse make sure you know what to do with it).
1. NEM-UL10C00 (Chinese one) via TWPR zip installation
2. NEM-L51C900 (no fingerprints) via TWPR zip installation
3. NMO-L31C636 via TWPR restoration
Anyone has others, plse share!
Bonus: I am testing Meticulus RR build 5-Nov-2017
I came from eMui 4.1.2 (NMO-L31C636B152)
Unlock bootloader/ Meticulus TWPR/ Restore OEM VNS-L21 (P9 lite oem)aatached later-
-Reunlock/ Meticulus TWPR/ Wipe (Devik/ Data/ Internal)/Fash RR/Flash Gapps-
-Reboot TWPR/Wipe (format Data)/Reboot
Pray
It recognizes the sim card, signal is on even LTE (4G)/ Data, Calls, Camera
Thanks for sharing. I will update the repository thread with these useful files. There was already a thread for OEM info file collection
For nem-l21 ?
Repository updated with info and credit.
Many thanks man you saved my phone big thanks :good::good::good::good::good:
that is OEM NMO-L31 on Emui 5 right? And it isn't , can you provide me one ?
Pool20 said:
that is OEM NMO-L31 on Emui 5 right? And it isn't , can you provide me one ?
Click to expand...
Click to collapse
What is cxyz? Is it c636 you are looking for? If so, its in OP
Oh right sorry
OEM for NEM-L22C675
stevedat said:
Here are OEMs that I collected online and would like to share with you guys for playing with changing regions on the device for testing (please bear your mind in bricking your H5C if you make it by yourself - plse make sure you know what to do with it).
1. NEM-UL10C00 (Chinese one) via TWPR zip installation
2. NEM-L51C900 (no fingerprints) via TWPR zip installation
3. NMO-L31C636 via TWPR restoration
Anyone has others, plse share!
Bonus: I am testing Meticulus RR build 5-Nov-2017
I came from eMui 4.1.2 (NMO-L31C636B152)
Unlock bootloader/ Meticulus TWPR/ Restore OEM VNS-L21 (P9 lite oem)aatached later-
-Reunlock/ Meticulus TWPR/ Wipe (Devik/ Data/ Internal)/Fash RR/Flash Gapps-
-Reboot TWPR/Wipe (format Data)/Reboot
Pray
It recognizes the sim card, signal is on even LTE (4G)/ Data, Calls, Camera
Click to expand...
Click to collapse
Dear Sir
You have these file for Indian version honor 5c NEM-L22C675B140
Project Treble 10.0 For XZsBased on Sony Open DevicesI am not responsible for bricked devices, dead SD cards.Special Thanks: @local__hero
请中文用户遵守XDA规则，使用双语留言
Download Link
How to flash: See the guidance in Treble-10.0-keyaki-4.9-sjll-V2.10.zip.
You need to choose the GSI type:
Android 10.0.
A/B or B, don't choose A-only!
ARM64.
XDA:DevDB Information
Treble, ROM for the Sony Xperia XZs
Source Codes
Link
Contributors
Sjll
ROM OS Version: 10.0
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Testing
Created 2019-10-02
Last Updated 2020-03-18
The device is always inexplicably restarted for unknown reasons.
The device is always inexplicably restarted for unknown reasons.Looks like all the three-party rom of xzs has this problem (from google translation, my English is really bad XD)
fengwang233 said:
The device is always inexplicably restarted for unknown reasons.Looks like all the three-party rom of xzs has this problem (from google translation, my English is really bad XD)
Click to expand...
Click to collapse
I have only met once. I flashed based the latest official firmware.
Sjll said:
I have only met once. I flashed based the latest official firmware.
Click to expand...
Click to collapse
I am preparing to flash back the official firmware XD
Booting stock ROM seems to work. However, flashing Gapps package 9.0 gives error saying the ROM is SDK23 (or Android 6.0).
DAANDAV said:
Booting stock ROM seems to work. However, flashing Gapps package 9.0 gives error saying the ROM is SDK23 (or Android 6.0).
Click to expand...
Click to collapse
You should flash a gapps suit for Android 10.0.
Sjll said:
You should flash a gapps suit for Android 10.0.
Click to expand...
Click to collapse
Thanks. I was not sure since OEM is still 9 and Gapps 10 was not yet available for download on official website. Tried from Cyanogen website Gapps 10 (full, pico) but 'Android Setup keeps stopping'. Tried from XDA BiTGApps, does not have Android Setup and works.
Will keep you posted here on how ROM behaves.
DAANDAV said:
Thanks. I was not sure since OEM is still 9 and Gapps 10 was not yet available for download on official website. Tried from Cyanogen website Gapps 10 (full, pico) but 'Android Setup keeps stopping'. Tried from XDA BiTGApps, does not have Android Setup and works.
Will keep you posted here on how ROM behaves.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=80438823&postcount=64
Delete it.
After installing ROM directly enter twrp and flash gapps ?
Seems to work
So I tested the rom for some time now.
It indeed restarts at some random moments just idling laying on the desk. Do not yet have an understanding why this is. However it is not that often that it is annoying.
Magisk works perfectly.
BitGApps does also work.
A lot of notifications saying app versions are not made for Android 10, try to update while having latest installed. Guess this is a Android 10 issue?
Netflix does not seem to work keeps giving connection error (9).
At startup the notification always pops up saying there is a problem with the android system.
Sometimes text in apps or launcher vanishes until restart.
Thanks for all the work!
Please make stable project treble for pie
Are there any near future plans for updates to make this ROM more stable? Or can I provide error logs to contribute?
The rebooting is getting worse and more annoying. I'm in doubt to get back to old ROM.
Thanks in advance.
twrp
someone can tech me? how to install twrp sony xperia xzs sov35 ,android 8.0, buildnumber. 41.3.c.1.203
fengwang233 said:
The device is always inexplicably restarted for unknown reasons.Looks like all the three-party rom of xzs has this problem (from google translation, my English is really bad XD)
Click to expand...
Click to collapse
Any solutions for the random reboot
So this rom is not updated for 5 months. I hope it'll get an update soon
fhcwcsy said:
So this rom is not updated for 5 months. I hope it'll get an update soon
Click to expand...
Click to collapse
Update now.
Does the latest build support G8232?
cant read sim card
anyone ? i cant get read sim card
low battery protection
hay , i just notice , if my power level is under 5%
the phone will extreme laggy , and the core is offline
how can i fix it ?
Hi. I want to try this project but I'm not sure how to do this. I tried once but I failed. Can someone tell me what's wrong? Thanks. Here's what I tried (bootloader is already unlocked):
1. flash "41.3.A.2.247. Customization : Customized US" using flashtool.
2. fastboot flash oem vendor.img
3. fastboot flash boot boot.img
4. fastboot flash system <GSI Image>
where <GSI Image> is downloaded from [here](https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690) following [this](https://www.xda-developers.com/flash-generic-system-image-project-treble-device/) tutorial. The download link in [phh-Treble AOSP Thread](https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659) is dead.
5. Bootloop. Doesn't even get pass the sony logo.
How can i find it
Third party of ROM for nova 3e(P20 Lite)
I don’t know if there will be restrictions on sales in different countries
houliwei said:
How can i find it
Third party of ROM for nova 3e(P20 Lite)
Click to expand...
Click to collapse
Do you mean Custom ROMs like Treble GSI LineageOS , CAOS etc. ? You can install any Custom ROM from the P20 Lite section.
Edit: if I remember correctly NFC didn't work, at least on ANE-TL00.
-Alf- said:
Do you mean Custom ROMs like Treble GSI LineageOS , CAOS etc. ? You can install any Custom ROM from the P20 Lite section.
Edit: if I remember correctly NFC didn't work, at least on ANE-TL00.
Click to expand...
Click to collapse
Are there any requirements for the bottom installation package?
I know very little, understand（>_<)
houliwei said:
Are there any requirements for the bottom installation package?
Click to expand...
Click to collapse
what you’ll need to flash a ROM:
- Install necessary computer software (usually "Minimal ADB and fastboot")
- Download packages (ROM, stock recovery, TWRP etc.)
- Unlock bootloader (!)
- Flash custom ROM
- Flash apps
- Reboot and personalize
So before you get all crazy messing ( ) with the software of your device, you should know some basics...
First of all, I'm really sorry if this thread would turn out to be a dumb enquiry. I am new to intrinsically customising my phone and only have been using this device (Redmi Note 9S EEA Curtana, MIUI Global V11.0.4.0. QJWEUXM 4/64 GB) for 10 days. I've successfully installed root and TWRP on my phone after having thoroughly researched relevant information. The only thing is all my efforts regarding the removal of force encryption have so far failed. I'm inclined to install a custom ROM, e. g. LineageOs or Evolution X.
1. Is it a necessity to have encryption permanently disabled so that the flashing process proves viable? Currently, I'm only aware of a method which has its effect limited to the the period the phone is in recovery. It involves formatting data and then installing Magisk and thus I need to go through the set-up again. At the end of the operation, encryption is enabled again. I have no clue why. I've tested loads of no verity opt files, none of them worked in a proper way either.
2.Will installing a custom ROM eliminate root acces (since it performs a reinstallation targeting the entire system, let alone the patched boot image)?
3. In case something goes wrong, what's the correct procedure to return to the factory ROM? Is re-locking the bootloader a prerequisite? (See this guide https://c.mi.com/uk/miuidownload/detail?guide=2, for example. Notice how each of the stable MIUI releases there are marked with ★ next to them, meaning they're locked. I didn't quite grasp the message they were trying to convey with that explanation though.)
I'm conscious that's a lot to ask in a single thread, however, unlike myself, the majority of users here are supposedly tech enthusiast and probably have encountered similar difficulties on several occasions.
I hope that I've provided enough information and the thread has been named reasonably.
(Priority: detailed answers within a month would be great.)
Cheers,
Hsjaai
Just format data: twrp->wipe->format data write yes->reboot twrp and flash rom.
If you got error(red lignes reboot twrp and format again).
or
delete all your lockscreen security before flashing but to install a new rom you must format the data before.
Thanks for your quick response, honestly I didn't expect anyone to be this early to react.
As I've already mentioned, in TWRP there's a workaround for temporarily disabling encryption using the first method, the latter one doesn't seem to function as intended - that may be the case on newer devices, according to an article I've come across.
One last request. Could you please (briefly) answer my two other questions as well? How do I reinstall MIUI if something breaks down? Is the flashing apparatus provided by Xiaomi reliable?
I'll keep you updated on my progress,
Hsjaai
Hsjaai said:
Thanks for your quick response, honestly I didn't expect anyone to be this early to react.
As I've already mentioned, in TWRP there's a workaround for temporarily disabling encryption using the first method, the latter one doesn't seem to function as intended - that may be the case on newer devices, according to an article I've come across.
One last request. Could you please (briefly) answer my two other questions as well? How do I reinstall MIUI if something breaks down? Is the flashing apparatus provided by Xiaomi reliable?
I'll keep you updated on my progress,
Hsjaai
Click to expand...
Click to collapse
Use this tool who is reliable(if you follow the instructions). In all cases unroot before and reboot (if necessary).
NOSS8 said:
Use this tool who is reliable(if you follow the instructions). In all cases unroot before and reboot (if necessary).
Click to expand...
Click to collapse
Thank you so much once again for the help. What should I do if the worst-case scenario arised -essential parts of the file system got corrupted so that the phone wouldn't be capable of booting into system? Uninstall magisk via zip and then make use of the fastboot tool?
Hsjaai said:
Thank you so much once again for the help. What should I do if the worst-case scenario arised -essential parts of the file system got corrupted so that the phone wouldn't be capable of booting into system? Uninstall magisk via zip and then make use of the fastboot tool?
Click to expand...
Click to collapse
1)Normaly yes
2)Or with app(i prefer)
NOSS8 said:
2)Or with app(i prefer)
Click to expand...
Click to collapse
What did you mean by that exactly?
Besides, sorry for bothering you, it's just that I'm genuinely curious and don't want to mess up the process.
Hsjaai said:
What did you mean by that exactly?
Besides, sorry for bothering you, it's just that I'm genuinely curious and don't want to mess up the process.
Click to expand...
Click to collapse
With Magisk app
I'm still unsure about something. Will the custom ROM be installed without hassle if I unroot Magisk at the beginning (meanwhile leaving the custom recovery intact, of course)? No guide seems to deem having root installed as a prerequisite. If you answer that, I'm really embarking on the flashing process.
Hsjaai said:
I'm still unsure about something. Will the custom ROM be installed without hassle if I unroot Magisk at the beginning (meanwhile leaving the custom recovery intact, of course)? No guide seems to deem having root installed as a prerequisite. If you answer that, I'm really embarking on the flashing process.
Click to expand...
Click to collapse
Installing a custom rom (aosp or Miui) requires a data format (erases all data and creates a new partitions if necessary) which will remove root anyway, but sometimes root + twrp creates problems (can't mout the partitions) it is therefore to avoid this that I recommend you to unroot before.
In all cases (Aosp or custom Miui) magisk is installed last.
Which ROM do you want to install?
I'd like to install LineageOS first and see how compatible it is.
[ROM][UNOFFICIAL] LineageOS 17.1 for Redmi Note 9S
THERE IS AN OFFICIAL BUILD NOW, USE THAT INSTEAD! Note: this ROM is derived from LeddaZ's build. I will continue to update it until my 9s is on its last legs. Do not expect any features to be added. LineageOS is a free, community built...
forum.xda-developers.com
LineageOS With Android 11 For Redmi Note 9s/9 Pro/9 Pro Max/Poco M2 Pro (Miatoll) | The Custom Rom
November 20, 2021 Lineage OS 18.1 | OFFICIAL ~ Miatoll Android: 11 Build Date: 19.11.2021 Maintainer: @dereference
thecustomrom.com
The latter is relatively new, although I doubt that site would be credible.
Hsjaai said:
I'd like to install LineageOS first and see how compatible it is.
[ROM][UNOFFICIAL] LineageOS 17.1 for Redmi Note 9S
THERE IS AN OFFICIAL BUILD NOW, USE THAT INSTEAD! Note: this ROM is derived from LeddaZ's build. I will continue to update it until my 9s is on its last legs. Do not expect any features to be added. LineageOS is a free, community built...
forum.xda-developers.com
LineageOS With Android 11 For Redmi Note 9s/9 Pro/9 Pro Max/Poco M2 Pro (Miatoll) | The Custom Rom
November 20, 2021 Lineage OS 18.1 | OFFICIAL ~ Miatoll Android: 11 Build Date: 19.11.2021 Maintainer: @dereference
thecustomrom.com
The latter is relatively new, although I doubt that site would be credible.
Click to expand...
Click to collapse
Umm... I've taken my word back, they're XDA developers, not just some random dudes in the internet. Still, you can't be too careful.
Deleted
Hsjaai said:
Umm... I've taken my word back, they're XDA developers, not just some random dudes in the internet. Still, you can't be too careful.
Click to expand...
Click to collapse
Lineage 17 for Curtana
Lineage 18 for Miatoll
CherishOS https://sourceforge.net/projects/cherish-os/files/device/curtana/
More options than lineage.
NOSS8 said:
Lineage 17 for Curtana
Lineage 18 for Miatoll
CherishOS https://sourceforge.net/projects/cherish-os/files/device/curtana/
More options than lineage.
Click to expand...
Click to collapse
What device is Miatoll ?
Hello guys ! For some days or weeks, I see a new codename : Miatoll. I looked and search but I don't find what device is it. Can you helo me ? I wonder if I can flash my phone with a Miatoll Rom
forum.xda-developers.com
Miatoll ROMs are supposed to be compatible with Curtana if I haven't got something wrong... What's the deal with that?
I may consider flashing CherishOS instead, seems neat and the monthly updates appeal to me.
Hsjaai said:
What device is Miatoll ?
Hello guys ! For some days or weeks, I see a new codename : Miatoll. I looked and search but I don't find what device is it. Can you helo me ? I wonder if I can flash my phone with a Miatoll Rom
forum.xda-developers.com
Miatoll ROMs are supposed to be compatible with Curtana if I haven't got something wrong... What's the deal with that?
I may consider flashing CherishOS instead, seems neat and the monthly updates appeal to me.
Click to expand...
Click to collapse
Indeed it is the same.
Others great roms
https://sourceforge.net/projects/blissroms/files/R/miatoll/***
https://downloads.msmxtended.org/?dir=miatoll***
Don't flash magisk right away, check if the playstore is certified.
If not delele your google account and root with the Magisk app.
Of course, if you absolutely want to root your device for other reasons, ignore that.
***certified on redmi note 7
The installation of these should only differ (on a particular device) in the ROM that's being flashed az a zip, right?
For instance, see this guide. Could that be deemed to be applicable to any custom ROM?
https://www.getdroidtips.com/lineage-os-18-1-xiaomi-mi-a2-lite/
Hsjaai said:
The installation of these should only differ (on a particular device) in the ROM that's being flashed az a zip, right?
For instance, see this guide. Could that be deemed to be applicable to any custom ROM?
https://www.getdroidtips.com/lineage-os-18-1-xiaomi-mi-a2-lite/
Click to expand...
Click to collapse
Install the right TWRP
Be sure you have the right firmware.
If not flash it.
1)Twrp wipe format data write yes reboot twrp(if error reboot twrp and format again).
2)flash rom
3)reboot system
v11.0.4.0. QJWEUXM is a turkish rom(android 10)
V12.0.2.0.RJWMIXM is a global rom(android 11)Firmware base for AOSP
It is better to use Miflash and install TWrp after.(dont relock the bootloader).
Are you sure v11.0.4.0. QJWEUXM is the Turkish version? I thought it was EEA (the one tweaked for European countries). Installing the Global version seems alright, but why does the MIUI version has such a great effect on the outcome of the flashing?
Is that because both Cherish OS and the Global version are AOSP-based?
Hsjaai said:
Are you sure v11.0.4.0. QJWEUXM is the Turkish version? I thought it was EEA (the one tweaked for European countries). Installing the Global version seems alright, but why does the MIUI version has such a great effect on the outcome of the flashing?
Is that because both Cherish OS and the Global version are AOSP-based?
Click to expand...
Click to collapse
My bad EEA
AOSP use global firmware .RJWMIXM android 11
and sometime CN firmware.
https://xiaomifirmwareupdater.com/miui/curtana/