What's the absolute grippiest solution for this phone? Most skins don't give a lot of confidence. Egrips doesn't make something for our phone and those rings or popsockets are huge
These sandstone cases are the solution http://www.ebay.com/itm/MSVII-Slim-...hash=item33bedfb626:m:mkaiNfq5LXgpPGOyD4m0Sbg
Go to the patchworks website. I can't post the link because i don't have 10 posts but i already have a spigen neo hybrid which is slippery but i kept because i like the color. The patchworks case has a slim and just a regular case but both have special grip on the side where you hold the phone.
i just got the alcantara case and it's by far the grippiest case ive used on any phone.
You could also try a bumper as well. Adds minimal bulk (also won't hide the color of your phone) and will add some grip too. I've heard of bumpers for the iPhone, but didn't realize there were ones for Android phones as well, haha. XD Erika Griffin mentioned one when she did her S8 unboxing on her Youtube channel -- the RhinoShield CrashGuard Bumper Case. I couldn't find it on Amazon, but I included the link to their official site.
FluxionFluff said:
You could also try a bumper as well. Adds minimal bulk (also won't hide the color of your phone) and will add some grip too. I've heard of bumpers for the iPhone, but didn't realize there were ones for Android phones as well, haha. XD Erika Griffin mentioned one when she did her S8 unboxing on her Youtube channel -- the RhinoShield CrashGuard Bumper Case. I couldn't find it on Amazon, but I included the link to their official site.
Click to expand...
Click to collapse
Thanks. Bumpers unfortunately are too big. They add a lot of width to the phone which is already extremely big one handed
km8j said:
Thanks. Bumpers unfortunately are too big. They add a lot of width to the phone which is already extremely big one handed
Click to expand...
Click to collapse
That sucks. D: Only other thing I can think of would be to try something like the Spigen Thin Fit or Airskin cases as they're about the thinnest cases you can get.
EDIT TO ADD: Almost forgot the Spigen Liquid Air case, which of the ones I mentioned, I actually own this one. The pattern on it seems grippy, but I have to see how it feels in-hand when I get the device.
FluxionFluff said:
That sucks. D: Only other thing I can think of would be to try something like the Spigen Thin Fit or Airskin cases as they're about the thinnest cases you can get.
EDIT TO ADD: Almost forgot the Spigen Liquid Air case, which of the ones I mentioned, I actually own this one. The pattern on it seems grippy, but I have to see how it feels in-hand when I get the device.
Click to expand...
Click to collapse
Ya I have a couple like the air skin that are super thin. Just wish there was something thin that was really grippy. Might Plasti dip a case....
neotekz said:
i just got the alcantara case and it's by far the grippiest case ive used on any phone.
Click to expand...
Click to collapse
it adds a lot of grip if you "squeeze" the phone, but not that much when placed on a slope.
I got this one and it seems grippy enough to me!
https://www.amazon.com/gp/product/B06XP6KZKC/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
The speck pseudo grip is pretty decent. Pricey though.
I bought the Spigen Slim Armor / Metal Slate case for mine and it's a nice, tight fit. Feels great in the hand. Edges have a rubberish feel to them but don't add allot of bulk. Now the trick will be in finding a screen protector that will work with. Like I said, TIGHT!
My solution was the honeycomb skin from slick wraps. I've used it on my last 2 phones.
I agree with pieman13, I got a dbrand skin for my S6. Protects the glass from stuff wedging between the case and the back and is the right grip
Double post.
Ordered the new black dragon... Let's see
shoot a load of jizz right to the back of your phone. it'll stay sticky and grippy, as a bonus no one else will want to mess with your phone.
I bought this case because it looked super thin. I know this is for the S8+ (this regular s8 forum is more active ), and it's awesome. It definitely is super thin, so it won't add much in terms of protection, but it has an amazing feel. Very grippy in the hand, and even on slanted surfaces. I love the feel it adds to the phone, and the size is perfect. The white specs are more pronounced in the pictures on Amazon than they are in person, they are still noticeable but not "sparkly" looking like they appear on the pictures online.
ie=UTF8&psc=1https://www.amazon.com/gp/product/B06XS3F19Q/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
peachpuff said:
These sandstone cases are the solution http://www.ebay.com/itm/MSVII-Slim-...hash=item33bedfb626:m:mkaiNfq5LXgpPGOyD4m0Sbg
Click to expand...
Click to collapse
Ordered one to see how it comapres to my Nillkin case I just got (review up in accessories)
https://forum.xda-developers.com/galaxy-s8/accessories/best-slim-case-ive-t3597761
Holy crap, the Sandstone case posted by @peachpuff is AMAZING
Super thin and the texture is awesome.
It's even thinner than the Nillken which is hard to believe
Only issue is it DOES NOT have enough of a lip on the front to lift the screen off a flat surface if laid screen down. Not a huge detractor for me as I never have my phone screen down.
Related
As the tile asks.
Was going for the Neo Hybrid, but saw on YouTube videos that it adds a significant amount of bulk to the phone, also in dimensions, and it's not that sturdy anyway!
So I need a lightweight case, which will protect the phone, should have a decent amount of lip at front to protect the screen, and the case itself should not be fragile. I find it meaningless when a case requires not to be dropped. I am scared about dropping the phone, that's why I need a case at first place
I personally love UAG cases, but I don't like the hardcore industrialist look on them any more, I need something very simple yet elegant looking, like the Neo Hybrid.
Thanks.
Look at the UAG. Its pretty lightweight but may be more bulky than what you are looking for
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
1slow4G said:
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
Click to expand...
Click to collapse
This is not available in my location.
SilentJ20 said:
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
Click to expand...
Click to collapse
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
devilsdouble said:
This is not available in my location.
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
Click to expand...
Click to collapse
I also have the bearmotion bumper. Really love that bumper.
1slow4G said:
I also have the bearmotion bumper. Really love that bumper.
Click to expand...
Click to collapse
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
devilsdouble said:
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
Click to expand...
Click to collapse
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
1slow4G said:
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
Click to expand...
Click to collapse
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
devilsdouble said:
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
Click to expand...
Click to collapse
Yes it does. That's the temperature/humidity sensor btw
Have you looked at Otterbox?
ShadowLea said:
Have you looked at Otterbox?
Click to expand...
Click to collapse
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Right now the only option for me is to get a bumper, and in bumpers I can only have two, that Bear Motion one as suggested on previous page or some Amzer one, called Border Case or something, but I have no idea if that case has that cutout for the temperature sensor! Has anyone ever heard of this brand Amzer before? I certainly haven't! This is the case I am taking about,
http://www.amzer.co.in/Amzer-Border-Case-Black-P97313.htm
If that case doesn't have the cutout then my only option is to go for the Bear Motion one, but I don't think paying 2X price than what it's worth is reasonable by any means.
Lets see.
devilsdouble said:
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Click to expand...
Click to collapse
I've got the Commuter. It's a lot more elegant in reality than it looks in the pictures. (At least the black one is). But yes, it's a but bulky. It doubles the thickness if you count the rim on the front as well.
But if you want protection, something slim and sleek will not do much good. I've looked for those options, but they're all more for show than actual protection.
The diztronic tpu might be what you're looking for. Uag, spigen or especially otterbox are far from lightweight. I own the uag and I can drop the phone on any kind of surface without blinking, that case has serious protection. Otterbox is a tank, for construction people.
Yeah thanks guys.
@ShadowLea: Yeah I know that a bumper will not protect the device like an Otterbox would do or a UAG, but I am not looking for that much protection, just protecting the corners will do fine in my case, I think.
@lvnatic: Thanks. I know about UAG and Otterbox. I have used the Maverick on my S4 for a good four/five months, and it can protect the device in a lot of situations, but then I got tired of its look, too rugged, and that too when S4's backside was all glossy cheap type of plastic. For Note 3 and its backside material I can't think slapping a case on it, I just love touching that fake plastic It feels too good. If it were Note 2 or S4, I would not think a second before putting a case on it, because they felt that gross, to me.
Anyway, thanks all for the suggestions. For the time being I am going with a bumper, if I change my mind and consider a more protective case later then I will surely consider the suggested cases in this topic.
Does anybody know of a case that'll work with Samsung's wireless charging battery panel?
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
djak272 said:
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
Click to expand...
Click to collapse
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
1slow4G said:
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
Click to expand...
Click to collapse
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
djak272 said:
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
Click to expand...
Click to collapse
Figured that was the case (see what I did there ?)
I'll give it a try then, the looks are deceiving lol
What color you have? I'm stuck between slate and sliver
Has anyone found an ultra thin case like a Calicase or Peel?
so far i can't find one. i loved the offical LG case for the nexus 5x. it was basically a cover for the back and had cutout on the bottom. all i want is to protect the back from scuffs. don't need a big case.
I'm holding out for the Ringke Slim to come out for the Pixel. It's been a perfect slim case for my old Nexus 5, Nexus 5X, and then the 6P.
I'll be using the Pleson TPU case in the mean time.
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
d-pak said:
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
Click to expand...
Click to collapse
the Pleson one is one of my favorites! here it is on my pixel
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
daewond3r said:
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
Click to expand...
Click to collapse
I just popped it out and back in to see and no it didn't seem to be too tight. I don't believe this is a concern. The edges of the case are also rounded and have a soft matte type of finish.
Good case option from Amazon
If you need a quick case at a good price, try this one out. I ordered it in advance. It isn't that special but does the basics. I think it is slim, but not ultra slim. Check it out until more cases hit the market. Different colors and styles are available.
Search amazon for this name and brand. $7.99 shipped:
Google Pixel Case, DGtle [Shock Absorbent] Anti-Scratches TPU Gel Premium Slim Flexible Soft Bumper Rubber Protective Case Cover for Google Pixel (Smoke Black)
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
what you guys are listing and talking about are thin cases, OP is looking for ultra thin cases, like the orzly flexslim series:
http://orzly.com/products/flexi-slim
I hoping they will come out with one for the pixel too, these are really just for scratch protection and will offer literally no drop protection, its similar to having a slim on your phone but more flexibility as you can just put it on and take it off easily.
---------- Post added at 10:58 PM ---------- Previous post was at 10:57 PM ----------
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
Could you post a few more pics? I'm thinking of ordering this case too.
Thanks!
i'm hoping to go with just a bumper case around the outer edge, because this phone is a beauty and i dont want to cover it up! that said, if i did get a full case and wanted to keep it relatively slim, i'm probably go with the diztronic matte slim case. i have one on my 5x, and it's been not only great at protecting on minor falls and bumps, but has held up extremely well over time. couldn't say enough about that case. looks like amazon currently has it available for purchase, but it's not shipping until 11/4.
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
Are the edges the same color as the back (a matte black)? or are they glossy?
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
I was interested until I read some reviews stating that it's thick
Sent from my Pixel using XDA Labs
Spigen Case
FoleyRose said:
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
MNMichael said:
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
Click to expand...
Click to collapse
Thanks for the suggestion, but that's actually exactly the case I have on right now. What I meant was a case with open top, open bottom and open buttons. But not clear.
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Sent from my Pixel using XDA Labs
the tree said:
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Click to expand...
Click to collapse
Bingo bingo. People don't seem to get it. I settled for the maxboost also but it looks like decent space between the camera and the case worrying me. Calicase and peel are the leaders IMHO in this thin case space. Just no love for the pixel.
charklos said:
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Click to expand...
Click to collapse
Thanks for confirming. I was hoping for the ultra thin tpu. Can you add some pictures of it after the wool treatment?
I do not usually put my phone in a case because I do not like to add bulk. I like to keep it as slim and trip as possible. I am coming from a prior phone that had a rubberized surface on the edges and back (Droid MAXX - the original). The Pixel is a bit slippery for me.
I am curious what solutions people would recommend for the best way to add grip to the Pixel without adding bulk. Maybe I need to go with one of the thin cases, or maybe there is a skin that could help? I don't need to decorate the phone, but if there is a skin that helps it grip better I would give it a try.
Your options are case, skin, and naked. For cases, you're not going to get any thinner than the Nillkin Nature cases. I'm not a fan of the one I have but it's undeniably low in bulk. For skins, the are a ton of options and you'll have a variety of opinions but if you don't want a case, that's about your best option.
Some skins are grippier than others, even win a single manufacturer, so it's worth asking the manufacturer about it. For example, for dBrand their grippier skins tend to be the carbon fiber options.
Good luck!
I've said this in the other cases thread on here, but I'll post again just in case people don't know about that other thread.
Caudabe (http://www.caudabe.com) makes great, very slim cases for iPhones.
If you email/tweet them to make Veil XT for Google Pixel/Pixel XL, they might consider it.
You can try reaching out to Shumuri too (http://shumuri.com)
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Based on my experience with them on other phones, a skin won't provide anywhere near as much grip as the surface on that Droid Maxx.
Instead, take a look at the thread on ultra-thin cases:
http://forum.xda-developers.com/pixel/accessories/ultra-case-t3483579
The Nillkin Nature cases are very slim and definitely add grip to the phone. You can see pics in my post here:
http://forum.xda-developers.com/pixel/accessories/pixel-t3475315/post69764947#post69764947
Google Pixel (XL) Matte Black Skin Premium Quality SAMSUNG 3M Scotchprint 1080
http://www.ebay.com/itm/291970270753?var=590965880055
You can't go wrong with the UAG cases. The plasma series is surprisingly thin and light, but really has great edge and drop protection. they feel great in the hand. They are a little higher in price, but totally worth it.
https://urbanarmorgear.com/collections/type-plasma-series/products/plasma-series-google-pixel
I had one for my Note 5 and then S7, and I'm will be picking up another for my Pixel.
Sent from my Pixel using Tapatalk
Metalsauce said:
You can't go wrong with the UAG cases.
Click to expand...
Click to collapse
+1. I received the Ice case yesterday; using it on the silver Pixel. I wanted a slim grippy case, one with black rubber to hide the darkening that occurs with time on rubbery areas of phone cases, and a clear back to display the silver/white of the phone. This case is PERFECT. It looks great. And the grip is fantastic.
I just received a blue Speck Presidio Grip and it's a very nice case for adding grip. The blue one is hard to find unless you pay quite a bit of $$ (I found a listing on eBay for used under $20) but the black version can more easily be found for under $20.
The case fits very well without being too difficult to take on and off. The added grip is good without being extreme. The hard plastic has a nice matte feel to it (the previous Speck cases I had was glossy but I like this better). And the buttons have a good clicky feel to them. It's not a minimalistic case like the Nillkin Nature but it's tons better than something like the Incipio Dual Pro.
Hope this helps somebody!
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Sent from my Pixel
kkh786 said:
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Click to expand...
Click to collapse
They are very good skins! Do yourself a favor and be sure to use their videos for installation, don't skip steps, and give yourself plenty of time.
Just installed the bamboo skin. Looks good. Not perfect installation as am not patient enough. Haha.
Sent from my Pixel
I'm getting a Slickwrap skin. I've been using dbrand for a while now... Just want to try something different.
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
josephpalozzi said:
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
Click to expand...
Click to collapse
I've had Toast on phones and laptops. Great products although I prefer them on non-phone devices because it's impossible to put a case over top of it and sometimes you just need heavy duty protection.
grippy case
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
snowdej said:
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
Click to expand...
Click to collapse
Looks good. Could you post some actual real life photos with the phone in it?
kEvinErd said:
Looks good. Could you post some actual real life photos with the phone in it?
Click to expand...
Click to collapse
Hi
https://goo.gl/photos/H2qcY2ECW1AcxEfEA
I have a best skins ever fitted with the glossy screen and matte body.
Also I have a qi receiver. You can see the USB port blocked by it
The buttons are cut outs so are quite recessed. I had a spigen case on just before that covers the buttons
This case is much less bulky than the spigen
The headphone port is possibly slightly wrong. If you have a headphone socket with a bulky top it might struggle. This is being picky though and I could just get a scalpel to it to increase the hole a mm
Jools
devilsadidas said:
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Click to expand...
Click to collapse
There is the anitgravity space:https://megatinycorp.com/products/anti-gravity-space
This basically just sticks on to any case
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I bought this https://www.amazon.com/gp/product/B06XH1PWX9/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and really like it. It is slim enough for me and has great phone protection.
I've ordered this one. Clear and thin.
https://www.amazon.com/Trianium-Res...d=1493470061&sr=1-1&keywords=trianium+s8+case
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
the thinnest case would be ones made out of polypropylene. some of them get as thin as PAPER. others get thicker/harder plastic feel, but no real point as any drops will crack your glass...
I always buy TPU thermo polyurethane which is very resilient and i've been surprised a few times on how it protected my phones. the thinnest TPU i found are the CIMO
https://www.amazon.com/Galaxy-Cimo-...011&ie=UTF8&qid=1493474636&sr=8-5&keywords=s8
I have the Spigen which is too thick, back side measuring 1.4mm on my calipers
EasyAcc TPU which i'm rocking right now which is 1.3mm
Cimo which hasn't come in yet, but... I've had them for s6 and s7 and it only measures 1mm
I like to cut a small hole and mod the TPU cases so that it works on my modded magnetic charger.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
AdamIsYou said:
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
Click to expand...
Click to collapse
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
arampapaz said:
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
Click to expand...
Click to collapse
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
SptMogul said:
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
Click to expand...
Click to collapse
Loving it so far. It is a bit slippery though, not like other TPU cases I have which provide more grip. The separation between the camera and fingerprint scanner is a nice touch too. I'm guessing it is made from some sort of TPU., it is soft and flexible but not silicone. Be aware this is very light protection. I just wanted something to prevent scratches caused by everyday use. I was going to go naked, but this is pretty close and gives some protection.
I'm loving the new spidgen neo hybrid case
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
ElBeaner said:
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Click to expand...
Click to collapse
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
hejay said:
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
Click to expand...
Click to collapse
They're now available on Amazon with prime shipping
Still rocking this case and love it
kz121 said:
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
Click to expand...
Click to collapse
Could you tell me how much it weighs? Amazon lists 1.4 ounces for both item and shipping weight. That's way to heavy for me.
ElBeaner said:
They're now available on Amazon with prime shipping
Still rocking this case and love it
Click to expand...
Click to collapse
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
i bought this
https://kase.com/collections/s8
hejay said:
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
Click to expand...
Click to collapse
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Looks nice. It has a small lip at front to protect the screen?
Vogal said:
Looks nice. It has a small lip at front to protect the screen?
Click to expand...
Click to collapse
No Protection with this case. It clearly says in description only for scratch. If you want full protection I would suggest that you get this one from Samsung is very slim:
https://www.amazon.com/gp/product/B06XHWHYLV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Bets case I ever had
Spigen Thin Fit Galaxy S8: https://www.amazon.com/gp/product/B...54BCW&linkId=325db0677b883d6c92a8d1a83ac09792
Spigen Thin Fit Galaxy S8 Plus : https://www.amazon.com/gp/product/B...4LGHJ&linkId=22db5b6f758a85f0a88aaa7787bd29bb
ElBeaner said:
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
Click to expand...
Click to collapse
How is the grip
---------- Post added at 05:05 AM ---------- Previous post was at 04:49 AM ----------
Does the olixar flexishield actually have something special for grip? They say it's a non slip coating but is it any different than regular tpu
https://www.androidcentral.com/best-google-pixel-4a-cases
just delivered...
fronto said:
https://www.androidcentral.com/best-google-pixel-4a-cases
Click to expand...
Click to collapse
it'll add some colors to "just black"
mzsquared said:
it'll add some colors to "just black"
Click to expand...
Click to collapse
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
fronto said:
https://www.androidcentral.com/best-google-pixel-4a-cases
Click to expand...
Click to collapse
So I have been on a bit of a shopping spree (oops). Thankfully Amazon US has free returns on cases. I currently have the:
DiMiK case: https://www.amazon.com/dp/B084S3ZY9G/ref=cm_sw_r_cp_tai_jbZmFbDRNDBWQ
Caseology Vault: https://www.amazon.com/dp/B083Q4SY5G/ref=cm_sw_r_cp_tai_5aZmFb8PPY0N6
Spigen Liquid Crystal: https://www.amazon.com/dp/B083N54J5Y/ref=cm_sw_r_cp_tai_OaZmFbVDVR3P1
And tomorrow I get the Cyrill Brick Case: https://www.amazon.com/dp/B083QQTQ3V/ref=cm_sw_r_cp_tai_5.YmFb2PCB9HQ
Quick notes and observations.
1) All of the cases are the exact same size and thickness.
2) The DiMiK case is as cheap as you would expect. No real corner protection or grip and the form is not perfect.
3) The vault is great quality but notably heavier than the other cases. Outside of the extra weight, my main concern is grip from this case. The texture adds no real grip to the phone. Form is perfect.
4) Liquid crystal also has almost perfect build quality with one small imperfection on the inside of a corner. Very light weight with great protection. The grip on this case is fantastic (important to me). Unfortunately I think it will get noticeably scuffed and will eventually turn yellow.
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
I wish I had a solid color liquid crystal case. That is why I am trying the brick case. No perfect solution yet.
Thought I would share with everyone.
Uh60m Pilot said:
So I have been on a bit of a shopping spree (oops). Thankfully Amazon US has free returns on cases. I currently have the:
DiMiK case: https://www.amazon.com/dp/B084S3ZY9G/ref=cm_sw_r_cp_tai_jbZmFbDRNDBWQ
Caseology Vault: https://www.amazon.com/dp/B083Q4SY5G/ref=cm_sw_r_cp_tai_5aZmFb8PPY0N6
Spigen Liquid Crystal: https://www.amazon.com/dp/B083N54J5Y/ref=cm_sw_r_cp_tai_OaZmFbVDVR3P1
And tomorrow I get the Cyrill Brick Case: https://www.amazon.com/dp/B083QQTQ3V/ref=cm_sw_r_cp_tai_5.YmFb2PCB9HQ
Quick notes and observations.
1) All of the cases are the exact same size and thickness.
2) The DiMiK case is as cheap as you would expect. No real corner protection or grip and the form is not perfect.
3) The vault is great quality but notably heavier than the other cases. Outside of the extra weight, my main concern is grip from this case. The texture adds no real grip to the phone. Form is perfect.
4) Liquid crystal also has almost perfect build quality with one small imperfection on the inside of a corner. Very light weight with great protection. The grip on this case is fantastic (important to me). Unfortunately I think it will get noticeably scuffed and will eventually turn yellow.
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
I wish I had a solid color liquid crystal case. That is why I am trying the brick case. No perfect solution yet.
Thought I would share with everyone.
Click to expand...
Click to collapse
I ordered the clear spigen ultra hybrid
https://www.amazon.ca/dp/B083MT5SJX/ref=cm_sw_r_cp_apa_i_Ti3mFbSV4S21M
The brick case looks cool with the switchable buttons
BigOkie said:
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
Click to expand...
Click to collapse
Can you post a link to those screen protectors?
kc6wke said:
Can you post a link to those screen protectors?
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B08D3W54DB/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Uh60m Pilot said:
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
Click to expand...
Click to collapse
I believe so. If you go to the Spigen website, at the top there are links to Caseology and Cyrill, as well as the Spigen Gearlock collection, and all the websites are styled and formatted identically.
That and: https://trademarks.justia.com/owners/spigen-inc-2959513/
I grabbed the pastel black dbrand skin for mine. Phone's plastic and should survive a drop so no case for me.
BigOkie said:
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
Click to expand...
Click to collapse
I just order the Spigen Rugged Armor this morning. https://www.amazon.com/Spigen-Rugged-Armor-Designed-Google/dp/B083N5DD7K/ref=sr_1_1?dchild=1&keywords=spigen+pixel+4a&qid=1597678531&s=electronics&sr=1-1
I have been happy with my nearly Spigen case for my OnePlus3T. I wish there was a bright red or blue besides just black...but I can live with black. I would have considered the Tough Armor If I had found that in my amazon searches. I like how the Tough Armor gets wider around the camera bump to protect it.
castlefox said:
I just order the Spigen Rugged Armor this morning. https://www.amazon.com/Spigen-Rugged-Armor-Designed-Google/dp/B083N5DD7K/ref=sr_1_1?dchild=1&keywords=spigen+pixel+4a&qid=1597678531&s=electronics&sr=1-1
I have been happy with my nearly Spigen case for my OnePlus3T. I wish there was a bright red or blue besides just black...but I can live with black. I would have considered the Tough Armor If I had found that in my amazon searches. I like how the Tough Armor gets wider around the camera bump to protect it.
Click to expand...
Click to collapse
Tough Armor is here
kc6wke said:
Tough Armor is here
Click to expand...
Click to collapse
I don't know how that case retails for 39.99 on Spigen's website, and only 14.99 on Amazon, but I ordered one just in case it's a momentary mis-pricing.
Spigen Tough Armor is the way to go. I've dropped my pixel 4a twice on concrete with no issues. I like the way it feels and it performs. Just wish it came in other colors.
There are not a lot of quality choices out there for the pixel 4a., but luckily this one is top drawer.
Nylo
Got a Caseology Parallax for the wife. She wanted something to add some color to the black phone. Case fits really well and the case looks really nice (if you're into their colors), but it's kind of a bit slippery. I have a feeling it won't be her forever case, but it's a fine case and will probably be the one she uses until we discover her forever case. Buttons are plenty clicky and the phone is plenty protected without being insanely bulky (it's not insanely thin either - it's in the middle of the spectrum but towards the bukly end). She usually goes with a Speck Presidio Grip case, but wanted to try something new. If you don't need a grippy or minimal case, I'd recommend it.
It fits perfectly with an OMOTION or Orzero TGSP.
Got this from Amazon
https://www.amazon.com/dp/B086X647CC?ref=ppx_pop_mob_ap_share
2 cases for $8
Since I got my phones today and put these on- the fit well, corners are protected, covers the camera. Does everything a case should do
Did I mention it's $8 for 2 cases?
My biggest "look-for" is a case that will allow a phone ring holder to adhere to it securely. That rules out the Caseology Parallax unfortunately for me..
I got a spingen; Black thin; https://www.amazon.com/Spigen-Thin-Designed-Google-Pixel/dp/B083N3YT4Z#ace-g7448806443
I got the same one as above^ and two more from the Spigen brand. I love the quality feel on them. Definitely recommend Spigen.
I purchased the Caseology Vault case. Fits fine. The lip around the edge of the screen sometimes makes the gestures a little more difficult but I think I've adapted now.
kc6wke said:
Tough Armor is here
Click to expand...
Click to collapse
I would love to get the Tough Armor but that plastic stand seems iffy to me. I've seen reviews of the case and it looks a little flimsy and like it might break. If the back of the case was completely solid without it, it would be my go to no questions asked. For now I picked up a Caseology Parallax which is set to arrive on Monday (my phone was just delivered today) to see if I like it or if I want to switch over to the Spigen Rugged Armor.