Bricked my note 4 while unlocking... Please Help - Xiaomi Redmi Note 4 Questions & Answers

Hello, i got a big problem and needed HELP!
Today i got my Note 4...
so i tryed to unlock the bootloader, bad thing did not logg in at the device.
i booted the mobile in fastboot mode and started the official unlock tool.
until 50% it went quite well then i got an error message:
couldn't verify device
current account is differnet from the account info on the device
so i tryed to boot again but was in a bootloop...
i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error
"flash boot error"
hope somebody can help
p.s. sorry for my poor english

Following

Did you read this?
dao80 said:
...i tryed also flashing a new rom (nikel_global_images_7.4.14_20170414.0000.00_6.0_global_b5d5f15e0e.tgz) and again i got an error...
Click to expand...
Click to collapse
Are you sure you are using MTK Variant?

akil777 said:
Did you read this?
Are you sure you are using MTK Variant?
Click to expand...
Click to collapse
yes im sure, i tryed this already and still in bootloop
althoug it says download ok

dao80 said:
yes im sure, i tryed this already and still in bootloop
althoug it says download ok
Click to expand...
Click to collapse
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.

akil777 said:
Did you use Sp flash tool?, if yes You should tick all except preloader. You will have to wait 5-15mins for the phone to boot up.
Click to expand...
Click to collapse
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(

dao80 said:
yes i used this tool, after rebooting the mi logo is on the screnn for about 7 secounds then the mobile boots again and again...
;(
Click to expand...
Click to collapse
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,

akil777 said:
I have never experienced that.. I think you should send it to your mobile repair center.. Be patient,, It might take few days. Don't panic,
Click to expand...
Click to collapse
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...

dao80 said:
i m already looking for a mobile repair center here who can repair xiaomi mobiles...
but so fare all numbers i called are not in service anymore or dont repair xiaomi...
Click to expand...
Click to collapse
check this http://en.miui.com/thread-491655-1-1.html

You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?

robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?

dao80 said:
yes i tried china and global
but only bootloop
but to be on the save side, where to i find a the stock rom (flashable with the miflashtool)?
Click to expand...
Click to collapse
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials

itsmedRb said:
flash done with mi flash? If got error then try with deep flash cable. see yt tutorials
Click to expand...
Click to collapse
deepflash is also possible for mtk devices?

robjbw said:
You tried putting phone in fast boot mode (volume down then power). Then just flash the stock firmware?
Click to expand...
Click to collapse
tried it again with the mi flash tool i got following error
80x80004005: FAILED (remote: download for partition 'boot' is not allowed

Hey Guys, i soveld the problem...
AND F**K it was a quite easy solution...
i tried so hard was crying and a kind of very desperate...
anyways i aslo wrot a mail to mi and they did not help at all...
they even say i should lock in at the device if im in a bootloop, kinda funny?
anyways so i drained the batterie and nearly about to give up this device....
BUT i give it one last try, plugt it in and booted it... it took a while but after a while i finaly was able to boot the Phone and set it up...
so this threat can be closed...
thank you guys for your help

Related

Device Bricked??

Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
leocadenas said:
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
Click to expand...
Click to collapse
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Amogh Thambi said:
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Click to expand...
Click to collapse
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
gsstudios said:
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
Click to expand...
Click to collapse
Okay. Thanks a lot! I guess I have to change it's motherboard!
Amogh Thambi said:
Okay. Thanks a lot! I guess I have to change it's motherboard!
Click to expand...
Click to collapse
yep, that's one way to solve it.
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
leocadenas said:
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
Click to expand...
Click to collapse
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Amogh Thambi said:
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Click to expand...
Click to collapse
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
warrior1208 said:
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
Click to expand...
Click to collapse
When i flashed boot.img the battery was almost full.... After it failed to flash... I rebooted to see if everything was okay... But Boom! After i pressed reboot to recovery the phone turned off and died..... Also in the repair shop, we tried booting up with electric source but still no luck! First Weird and Bad experience with samsung
Amogh Thambi said:
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Click to expand...
Click to collapse
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
jaysan2 said:
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
Click to expand...
Click to collapse
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Amogh Thambi said:
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Click to expand...
Click to collapse
hi, as i have seen your posts you have written that you do have tried jig, and no results. try to take out battery and connect the jig and put the battery, i believe this the last chance you might have through jig. Or just jtag it for 25$ it is not that expensive, let me know what happens with jig.

hard bricked g2 mini

I flashed the new v20c rom,and after that tried unlocking the bootloader,now my phone isn't responding to anything,what can i do with it?Please someone help
send to the support : )
sebatox said:
send to the support : )
Click to expand...
Click to collapse
I can't do anything with it to make it work again?
Krisz741 said:
I flashed the new v20c rom,and after that tried unlocking the bootloader,now my phone isn't responding to anything,what can i do with it?Please someone help
Click to expand...
Click to collapse
I wrote on android L subject TO NOT UNLOCKING BOOTLOADER! You made yourself fool not to read few more chapters, i wrote it yesterday.
The phone uses differend hex binaries in aboot.img, different that this in KK. Need some dev to try adapting it to new framework.
You're phone is done, only helps to change your motherboard in the phone.
Phone to support, costs around 50$ to repair.
Krisz741 said:
I can't do anything with it to make it work again?
Click to expand...
Click to collapse
Try fastboot
It reacts to nothing,i can't even get into fastboot
Zer0_rulz said:
Try fastboot
Click to expand...
Click to collapse
Unfortunately, he's done, fastboot will not work neither download mode.
Only repair. Or if he's lucky he don't crush required binaries.
@Krisz741 Download mode works? Or fastboot? When you remove battery and plug phone to pc what appears? Yellow sign?
Radac Stunghthumz said:
Unfortunately, he's done, fastboot will not work neither download mode.
Only repair. Or if he's lucky he don't crush required binaries.
@Krisz741 Download mode works? Or fastboot? When you remove battery and plug phone to pc what appears? Yellow sign?
Click to expand...
Click to collapse
Yes,the yellow sign appears.
Krisz741 said:
Yes,the yellow sign appears.
Click to expand...
Click to collapse
;//
Only repair service.
Sorry for my anger, but you could save your phone if you had read my post 2 pages earlier ;/
Radac Stunghthumz said:
;//
Only repair service.
Sorry for my anger, but you could save your phone if you had read my post 2 pages earlier ;/
Click to expand...
Click to collapse
Ahh,****..no way i can fix it?Repair is like 2 months..
Maybe Jtag Riif Box?
Krisz741 said:
Ahh,****..no way i can fix it?Repair is like 2 months..
Click to expand...
Click to collapse
Yeah you could fix it if you know how to change motherboard int he phone. Or if you know some talented phone repair genious near your town.
EDIT: JTag is a good idea, but i've not seen such tag. I saw some youtube videos how to unbrick G2, but it's alot of work, opening device included.
If i hold down volume down,and power,the screen flashes once,and does nothing :/ guess ill take it to the store then..
Krisz741 said:
Ahh,****..no way i can fix it?Repair is like 2 months..
Click to expand...
Click to collapse
2 months? You must be kidding! They're allowed to keep your phone for max 15 calendaristic days, else, they have to give you a brand new phone.
Just send it in any LG service, you can find some on your warranty paper. Just tell them it suddenly stopped working. I did the same and they fixed it for free.
As I said, google about Jtag riff box.
Krisz741 said:
If i hold down volume down,and power,the screen flashes once,and does nothing :/ guess ill take it to the store then..
Click to expand...
Click to collapse
You still have warranty?
Radac Stunghthumz said:
You still have warranty?
Click to expand...
Click to collapse
Yes i do,i bought it from t-mobile with contranct
Krisz741 said:
Yes i do,i bought it from t-mobile with contranct
Click to expand...
Click to collapse
Yeah, you have a chance. So if you want to save you G2 mini, go to them, and tell the phone stopps working after reboot or somethin.
They will fix it for free i think. You have your phone back in 2 weeks.
And don't play unlockin bootloader next time without reading threads specially there is brand new system just released
Radac Stunghthumz said:
Yeah, you have a chance. So if you want to save you G2 mini, go to them, and tell the phone stopps working after reboot or somethin.
They will fix it for free i think. You have your phone back in 2 weeks.
And don't play unlockin bootloader next time without reading threads specially there is brand new system just released
Click to expand...
Click to collapse
Yeah,i will pay more attention to not **** up my phone lol
can this work?
/watch?v=Muvcw5eVwH4

Bricked my Note 3...

Hi,
i also brocked my Note 3...
After updating with SP Flash tools 1516 my phone does not show any sign of life...
I flashed the last chinese stable from xiaomi and SP flash finished with the green hook
Now the phone does not boot, the screen is black and if connected to the charger there is
no red light and i dont know if it charges at all
I can still repeat flashing the phone but to no avail. Connecting the phone to
usb while holding VOL +, Vol - and power there is "connecting and disconnecting"
sound from WIN7.
However Miflash does not recognize the phone anymore.
Could it be that there is a problem with the locked bootloader ?
I read some threads on Mi4 phones where they had to shorten some testpoints on the motherboard
to get the phone back to life, maybe there is a similar way for the Note 3?
I already did a lot of successfull flashing with other phones so i didnt expect any sort of problems....
Any help is really appreciated !!
Greetings
Joachim
Same problem here
Redmi Note 3 came with some unoffical multi language ROM preinstalled (7.00.11.00)
OTA did not work, downloading update onto the phone and updating via Update-App did not work either, so there was no other way than using SP Flashtool to get some official ROM on it
Downloaded official 7.0.19.0 and loaded it into SP Flashtool => Flashing went without any fault (green hook at the end) but phone doesnt do anything since then
You should untick the first option in flashtool (preloader). I had the same problem once. Here is a video which helped me and saved me device. Follow the instructions and you'll be ok. https://www.youtube.com/watch?v=A3TmXtOA0IA
arist1976 said:
You should untick the first option in flashtool (preloader). I had the same problem once. Here is a video which helped me and saved me device. Follow the instructions and you'll be ok. https://www.youtube.com/watch?v=A3TmXtOA0IA
Click to expand...
Click to collapse
It's work yes or no ? I have the same problem
same issue
i need ur help. My Redmi note 3g (Mediatek - Global rom) was stuck up at logo. When i tried flashing it using SP flash tool , i got error that "pmt changed for the rom it must be downloaded". Then i have seen some youtube videos and read forums . As per their instruction i have first forrmated using "Auto Format flash" and then did "Format all+ Download" . Now my phone is not starting.
No fastboot, no charging , No recoery mode. Only i am able to run same process again.
I am average user so dont know much about such process.. Can you guys plz help me what to do?
jalsa_100 said:
i need ur help. My Redmi note 3g (Mediatek - Global rom) was stuck up at logo. When i tried flashing it using SP flash tool , i got error that "pmt changed for the rom it must be downloaded". Then i have seen some youtube videos and read forums . As per their instruction i have first forrmated using "Auto Format flash" and then did "Format all+ Download" . Now my phone is not starting.
No fastboot, no charging , No recoery mode. Only i am able to run same process again.
I am average user so dont know much about such process.. Can you guys plz help me what to do?
Click to expand...
Click to collapse
It was a big mistake selecting "format all" option. Now everything inside your phone is deleted (including IMEI). Big problem. Who suggested you to do this?
arist1976 said:
It was a big mistake selecting "format all" option. Now everything inside your phone is deleted (including IMEI). Big problem. Who suggested you to do this?
Click to expand...
Click to collapse
i have seen some youtube videos and forums mentioning to do the same. what is the solution now?
arist1976 said:
It was a big mistake selecting "format all" option. Now everything inside your phone is deleted (including IMEI). Big problem. Who suggested you to do this?
Click to expand...
Click to collapse
jalsa_100 said:
i have seen some youtube videos and forums mentioning to do the same. what is the solution now?
Click to expand...
Click to collapse
I was in the same boat as you. The only way to revive my RN3 was to select format and download otherwise it would not turn on. I then experienced the no imei issue as you are. When I did was follow a guide which I got from en.miui.com under tips and tutorials for Redmi Note 3 where it says to permanent fix imei and worked. I never lose my imei now
help
Zehlek said:
I was in the same boat as you. The only way to revive my RN3 was to select format and download otherwise it would not turn on. I then experienced the no imei issue as you are. When I did was follow a guide which I got from en.miui.com under tips and tutorials for Redmi Note 3 where it says to permanent fix imei and worked. I never lose my imei now
Click to expand...
Click to collapse
What should i do now? will my RN3 will start again? Can u plz help?
jalsa_100 said:
What should i do now? will my RN3 will start again? Can u plz help?
Click to expand...
Click to collapse
Is it SD or MTK?
HELP
Zehlek said:
Is it SD or MTK?
Click to expand...
Click to collapse
MTK
jalsa_100 said:
MTK
Click to expand...
Click to collapse
This is what I did which worked for me
- First I downloaded so flash file
-Selected format and download in spflash
-It final booted up and I had lost Imei
-When it gets to Mi Account setup I had to select skip
-I followed THIS GUIDE
Zehlek said:
This is what I did which worked for me
- First I downloaded so flash file
-Selected format and download in spflash
-It final booted up and I had lost Imei
-When it gets to Mi Account setup I had to select skip
-I followed THIS GUIDE
Click to expand...
Click to collapse
Thanks for sharing info but its for RN3 whereas my phone is RN3G Redmi note 3G.

PLEASE HELP!! Bootloop exist even after flashing with EDL test point method

So my phone just got stuck while normal usage. Tried restarting and the phone began boot looping.
Did plenty of research and finally decided to flash. Tried to flash using mi flash in fastboot mode but failed then google search made me realise my bootloader was locked. Did more research and decided to flash using test point EDL method.
Things went pretty well and the flash (miui v8) and the process became successful and when I powered my device the phone went back to boot loop again.
Tried flashing again and the result was the same.
It would be really helpful if somebody could actually help clear the issue. Did pretty much everything I could do as a newbie to flashing.
thank you!
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
thisbearisdrunk said:
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
Click to expand...
Click to collapse
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
M i L i N said:
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
Click to expand...
Click to collapse
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
thisbearisdrunk said:
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
Click to expand...
Click to collapse
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
M i L i N said:
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
Click to expand...
Click to collapse
If it recognises ur phone like that then flashing does nothing to ur phone so the only way is to go into edl mode and then flashing
https://forum.xda-developers.com/re...ool-redmi-note-4-edl-mode-o-removing-t3684024
Use this tool to go into edl mode and then flash
This thread can help ,because i bricked my phone once without unlocking the bootloader and the miflashtool recognised my phone like how it recognised urs and this thread saved my phone
Good luck

mi A3 Dead

When i flashed the Evolution X Rom to Stock rom It Got Failed And My Device Is Not Turning ON.
Whenever I Tried To Install stock Rom using mi flash tool It Is Saying "Cannot Recieve Hello Packet" & write time out,maybe device was disconnected Please Help ME To Fix
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
wetito said:
Is not completly true... When the edl error "... Hello packet" appear is impossible. I also recived it when i tryed to make mia3-cce9 conversion. I retry many times but no success. Qualcomm port works, miflash connection works... But it's impossible to flash. I have searched every where on internet without succes. For me only fastboot flashing mode work. Not edl... I think this hello package is a software restriction of xiaomi. But i don't understand why some devices can bypass it and other fails
A question: you can enter in fastboot? I'm not sure you have try. Is the more simply solution. It's improbably that evolutionx had erase the bootloader... Connect phone to pc, then press power+vol- if you will see the xiaomy avatar.. you can recover the system. An advice for you: before flash a custom rom read with attention the guide. I suppose you haven't do this. And your modding level is low...
Click to expand...
Click to collapse
papsr6 said:
The device is off?
Try to hold volume down and up at the same time and connect the usb cable to see if going to EDL mode.
If going to EDL mode you can flash a stock rom from edl with miflash.
Click to expand...
Click to collapse
My Phone Is Now Like This :
hishamhsm said:
I Had Tried EDL flashing from Unlock Tool Flashing Done Perfectly But Formatting Failed..Is it a partition error ?.. The Display is not turning on.. No Signal Only The Signal is Entering EDL mode
Click to expand...
Click to collapse
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
wetito said:
What you wrote is not good... I don't know unloock tool. But before use this applications is necessary read carefully the instructions. It seems you didn't have do this. Good luck. Ps: if your phone boot into fastboot reflash stock via miflash... If you don't have made a big damage it will work. Very import is select the correct slot before flash... In my case i always select slot a to make a clean and safe installation
Click to expand...
Click to collapse
is mi authorized account needed
hishamhsm said:
is mi authorized account needed
Click to expand...
Click to collapse
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
no fastboot , no charging
wetito said:
Probably... Mee to i found this... But via fastboot is not necessary. Only with edl cold be necessary
Click to expand...
Click to collapse
will you help me to flash my phone via teamviewer
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
wetito said:
Sorry if you have damage bootloader (so fastboot don't work), the only way is edl. But i don't know how to solve edl flash fail. You had ask to other user, or search with Google. Or i'm afraid for you... Buy new phone. For the future if you want modding... Do it carefully
Click to expand...
Click to collapse
Thanks Bro Thanks For Your Support,.... Love From Kerala , India
Good luck
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
azeem_saifi0411 said:
Same thing happened to me then i went mi authorised service centre and they charged 179rs and now my phone is working fine
Click to expand...
Click to collapse
is that phone under warranty while it was bricked
hishamhsm said:
is that phone under warranty while it was bricked
Click to expand...
Click to collapse
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
wetito said:
Sorry no. You have the bootloader unlocked... If your restore via edl will fail, in my opinion the best choice is buy a new phone. I don't know in your country. considerating that motheborard is not damaged... But phone must be open... The minum cost of this repair i think could be 100 € (convert in your currency). On YouTube there are a lot of tutorial how to do by yourself... But i'm not shure you have all skills...
Click to expand...
Click to collapse
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
hishamhsm said:
I Have Given It to A repair shop. They told me that that is emmc/UFS chip issue. So they will reprogramme the chip fix it and give the phone to me... They Told that it should fix..
Anyway I'm from India
Click to expand...
Click to collapse
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
wetito said:
I suppose that was the problem. I hope the repair shop in india are cheapest than in italy for the future... Make Modding with care
Click to expand...
Click to collapse
Repairing cost around 10dollars . In India repairing cost is low but the price of mobile phones and spare parts are too high due to tax.
Thank you so much for your help and support bro. Love From India❤❤

Categories

Resources