Related
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
naplesbill said:
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
Click to expand...
Click to collapse
Thanks for this review! I am looking for something less bulky than the case-mate. I'll have to check this out when I stop in my local ATT store. How much they selling them for?
I believe it was the usual rip-off price of $35. However, they give me 20% off on accessories at this store (frequent shopper there LOL). I am sure there are better deals, but I did not want to take a chance of messing up my phone before finding a case elsewhere. I paid full retail price so a few extra bones wasn't that big of a deal.
I was planning to return it, but I can't find anything similar online. If I find it online cheaper, I will buy it and return this one for sure. Either way, I am happy enough as it is.
I just bought this case today. I love it! Its like a mix between a hard case and tpu. If you had the bodyglove case on your captivate, you'll love this case. I like the look of the leather back, as I think it adds some class. This case doesn't add that much bulk either.
That was my first choice but the store rep couldn't get it to fit properly so I went with the ballistic even In this case the phone feels tiny in my Herman Munster hands after the infuse in a ballistic case I love this phone just gotta adjust to it
Sent from my SAMSUNG-SGH-I777 using xda premium
I also got this case. I like it a lot, it keeps the same of the phone without adding much bulk at all!
I got this case for my AT&T Galaxy S2 on launch day and I LOVE it. The Ballistics were just ridiculous. As far as getting the case on goes, I couldn't get it to fit at first but if you put it in bottom only, completely lip it; then top, completely lip it; then work the sides, it will always fit perfectly. Sometimes I feel like Gollum caressing my precious Ring with this baby.
Picked up this case today and absolutely love it. It doesn't add much weight to the phone and i feel it still keeps it slimness. As far as fitment goes. It does fit damn tight. I put it on the best I could at the store. I squeezed the sides to get the lip to go over but never could get the bottom corners to cover properly. Once I got home, I took it back out, then put it back on in reverse. This did the trick and it went on a lot easier.
I'm probably going to end up buying this case ASAP... I was interested in it for a while, but was afraid that it may have been too bulky.
Thanks for the feedback guys!
Sent from my SAMSUNG-SGH-I777 using xda premium
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
On another note anyone got the ivisor AG screen protector? not sure i am liking it. It seem to make my screen dim because of the non-glare, cant seem to find any good one on the net, they all seem to be for the international version. things are new so I will wait a bit.
Coldheat1906 said:
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
Click to expand...
Click to collapse
I am on a corporate account through my employer and get 15% off. I asked them about that discount on accessories and they said that it only applies to service plans. I guess I will be returning the case today after work...
jiannichan said:
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
Click to expand...
Click to collapse
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Bigdog1 said:
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
Click to expand...
Click to collapse
What problems are you having with fitment? While it does take a little bit to get it on right, it should still fit. I had problems with the bottom corners until I took it out then put in back on, starting on the opposite end.
axis01 said:
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Click to expand...
Click to collapse
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
I would love a case like this but the wife has the same phone as me. Does anyone know if it comes i white? Or am able to order a different color online?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
jiannichan said:
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
Click to expand...
Click to collapse
That one doesn't look bad. I see they made a large cut out where the power button goes. Don't really care for that big cutout but to each his own. Mine has actually become a lot easier over the last day or so. I guess the compound loosens up over time.
Just got my GS2 today and bought this case at the same time. I wanted something sleek after a Ballistic case on my Infuse and this seemed perfect.
As others have stated it's a tight fit. The sales rep couldn't get it on completely so I had to play with it myself. Another post stated putting bottom and top on first. I had better luck with the sides first. Maybe it is just loosening up after trying 2-3 times to get it on.
The volume and power buttons being covered are going to take getting used to as it takes a good press to work them.
To sum up, love the case so far. Seems to be good quality and good protection.
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
awtryau89 said:
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
Click to expand...
Click to collapse
I had to keep pressing in around the sides to get it to fit perfectly. It took an hour or so to settle in.
Sent from my SAMSUNG-SGH-I777 using xda premium
When I bought my HTC Advantage 4 1/2 years ago there was no decent case for it anywhere - like the Note it has a large screen (5") and unlike the Note a very large body. I found Nutshell (a.k.a. Tough-as-Nuts) and their line of cases - built like tanks, literally with gun holster components including heavy leather and heavy-duty belt clips. We had a long discussion about it here, including pics http://forum.xda-developers.com/showthread.php?t=344605 . It ended up being the only case most XDA members bought.
Fast forward to today, now that I have my Note on pre-order my first stop was to check out the Nutshell offering for the Note. This is the one I found:
http://tuff-as-nuts.com/Samsung-Galaxy-Note-belt-case.aspx
I also happened to find an old post offering a discount, which I didn't know about when I ordered my other case. This offer may not even be valid:
http://forum.xda-developers.com/showthread.php?t=259275
I haven't ordered the case yet, I want to see how well the Note fits into my Advantage case first - it will fit the height and width but the Advantage case may be too roomy for the thickness since it is twice as thick as the Note. If I do order one I'll report back here with pics and a fresh review.
Edited 4/12. Case arrived today, ordered on March 26th (I used the "tuff02" 10% discount code mentioned below). Just as well-built as my old case, even stronger because they now build in something flat and hard into the back wall. By putting the phone into the case with the screen facing inward the screen will be fully protected. I ordered the pen loop option this time. I always carried one inside my last case but that phone was so thick there was room next to it. As I figured, there isn't enough room for a pen next to the Note - too thin. I'm not complaining.
In the last picture you can see a bump under the leather below the metal clip. That, along with the lower lip of the clip, keeps it on your belt no matter what you do.
I'm still looking for a case for mine and came across your post; thank you for sharing. I'm still gonna do some more looking, but this one is now on my list as a possibility (that is if they take them off hold and actually start making them).
FYI...
I tried the coupon code "tuff01" in the thread you linked to and it showed up 5% savings. For the heck of it I tried punching in "tuff02" and it shows 10% savings.
techntrek said:
I also happened to find an old post offering a discount, which I didn't know about when I ordered my other case. This offer may not even be valid:
http://forum.xda-developers.com/showthread.php?t=259275
Click to expand...
Click to collapse
Sweet! I'll be sure to use that.
This case is awesome. I also got one for my MDA, still looks like new.
Quick update, I noticed they removed their placeholder page for the Note case (the 2nd link in my 1st post above). I've emailed them to find out which of their cases would be best. I looked at this chart to match up to the Note's specs (146.85 x 82.95 x 9.65mm):
http://tuff-as-nuts.com/beltcasessizetable.aspx
At first glance their case #215 would work - it appears to be the right length and width, but it has twice the depth as it should for the Note so it would flop around. Then I noticed case 270 right above it is the very one I already have for my Advantage and I already know that case is the right height, but too wide and again way too much depth. So that would mean 215 would be too long! I'm not spending $60 and waiting 2 weeks to find out it won't hold the phone securely. If I hear back from them I'll report back.
I am currently using a NutShell case I got as a freebee back at one of the PPC expos it is a very good fit (I do have the Samsung flip cover on it). The design is their basic case with the notched corners and no clip (leather slip panel the belt goes thru)
Cheers
BR
I received a reply from the company:
Almost there
Still awaiting final asset approval.
http://tuff-as-nuts.com/Samsung-Galaxy-Note-belt-case.aspx
So the placeholder page is back, and it says they are taking preorders if you are interested. I may make an order today.
Thanks for the info, techntrek. Please post if you hear anything. I'm a former (heck I still have it) Advantage owner looking into the note now, and one of the first things I'm looking at is a belt case like I used to love back then!
- I also sent you a pm. Interested in comparisons for former Advantage users to compare against the Note.
I had an Advantage. What questions do you have?
Sent from my SAMSUNG-SGH-I717 using xda premium
Thanks for the reply, but too late - I bought the Note a week ago. Loving it except for battery life problems (which I'm researching again now!)
Yup, we had a nice conversation comparing the Advantage to the Note.
Glad to hear you got one.
BTW it looks like this case is now available. Getting ready to order, using the "tuff02" discount code.
Just ordered, may take up to 2 weeks for delivery.
I've been wearing my phone on my belt for more years then I can remember - but since I had nothing for the Note up front, I've been carrying it loose in my pocket (with screen protector & ultra-slim bumper case) for a week.
..and I might stay this way for a while. I was always catching my case on things before. I was also hoping the vibration would be easy to feel in the pocket, but this past weekend proved the vibration isn't strong enough.
Might switch back to a belt pouch later, but going to stick with this way for a while & see. Be sure to post reviews of the Tuff case when you get it!
Ditto, I've been trying it in the pocket for the last 5 1/2 weeks, also hoping I could get away from the pouch. But it was always hard getting it out, so I'm back to a pouch. I agree it is surprisingly hard to feel the thing vibrate even when its sitting right on your leg.
Updated post #2 with a full review, including pictures.
Two things I would change so far. I never used the D-ring on my old case, and never will on this one. I should have asked them to leave it off. Looks like it will be easy to remove with a razor blade.
I'm glad I got the pen holder/loop, but I should have asked them to put it on the BACK edge, and since I always wear it on my right hip, to put it on the side that faces rear (the right side as you face the back).
Some things for you to consider if you order one.
Nut case for Galaxy Note
This is my 2nd tuff-as-nuts case. My first outlived all of my 3 iPhones. It is still in almost new condition in my drawer. This is the nicest hip holster I have found. I have tried several. The clip will never break. The fit is very snug for the first week or so and then it loosens up. I am very happy with this case ever though it is expensive. I got chocolate leather with belt clip and full magnetic flap.
~ Atticus
fit with speck candyshell??
techntrek said:
Edited 4/12. Case arrived today, ordered on March 26th (I used the "tuff02" 10% discount code mentioned below). Just as well-built as my old case, even stronger because they now build in something flat and hard into the back wall. By putting the phone into the case with the screen facing inward the screen will be fully protected. I ordered the pen loop option this time. I always carried one inside my last case but that phone was so thick there was room next to it. As I figured, there isn't enough room for a pen next to the Note - too thin. I'm not complaining.
In the last picture you can see a bump under the leather below the metal clip. That, along with the lower lip of the clip, keeps it on your belt no matter what you do.
Click to expand...
Click to collapse
Thanks for valuable info re: cases w/beltclips - will the phone fit with the candy shell over it??
The fit is VERY tight with no cover. They design to the factory specs and go slightly smaller, counting on the leather to stretch a little.
They will make custom versions for a small extra charge, or you could compare all of their models by size (look for the link on the left side of their home page) and pick one that is slightly larger. The one they originally made for the Advantage is probably the one you'll need. If there is any wild chance you live in central MD you could try my old case and buy it from me if it works.
Does anyone know where to get a cases and screen protectors? all I can find is for the international and sprint version. My phone arrives on monday
Got mine from ATT yesterday and they had a case on display, it's a dual protection case for $35, adds a little thickness to the phone. I did find this one online http:// http://www.amzer.com/Amzer-Simple-Cl...ack-P95089.htm
im currently rocking the belkin bumper from the att store. looks good and feels good
I got a "Body Glove" which is a gel inside a hard case. So far, I like it. It doesn't add as much girth as an otterbox. I also added a screen protector (yeah, I know that it's gorilla glass, but I've seen scratches on GG too).
have any pics?
kc720 said:
im currently rocking the belkin bumper from the att store. looks good and feels good
Click to expand...
Click to collapse
Hi, im about to pick this phone up. do you think you can put some pictures up with it on your phone? thanks in advance
Screen Protector and Case
I too was looking around for cases and screen protectors as I just got the phone today! Love it so far. Really well made and fast phone. I found an Spigen (SGP) screen protector but it's for the Sprint and International one, but since the screens are the same (to my knowledge) I sent an email asking Spigen if they are compatible and also asked then when the AT&T Optimus G cases will be released. Will update when I receive an email back.
P.S.
I tried the Belkin Bumper for this phone at the AT&T store, and truly hated it because it made the phone look super weird.
I found a good screen protector for the front and back of the phone.
Search Amazon and eBay for the screen protector: REALOOK AT&T LG Optimus G(LG-E970) Screen Protector
(I'm not allowed to post a link until 10 posts)
I ordered this today and will post here on the quality when I get them.
dbgeek said:
I got a "Body Glove" which is a gel inside a hard case. So far, I like it. It doesn't add as much girth as an otterbox. I also added a screen protector (yeah, I know that it's gorilla glass, but I've seen scratches on GG too).
Click to expand...
Click to collapse
I can vouch for the quality of this BodyGlove case that AT&T sells.... this morning I found my phone laying underneath our kitchen table. The phone had fallen 6 feet from a shelf and our floor is made of smooth concrete. I noticed it somehow made contact with three corners of the case leaving gashes... but inside my phone was found in pristine condition when removing the case. If it works from 6 feet it will most certainly be fine dropped from your hand or out of pants pocket
Pandasaurus12 said:
I too was looking around for cases and screen protectors as I just got the phone today! Love it so far. Really well made and fast phone. I found an Spigen (SGP) screen protector but it's for the Sprint and International one, but since the screens are the same (to my knowledge) I sent an email asking Spigen if they are compatible and also asked then when the AT&T Optimus G cases will be released. Will update when I receive an email back.
P.S.
I tried the Belkin Bumper for this phone at the AT&T store, and truly hated it because it made the phone look super weird.
Click to expand...
Click to collapse
Sgp ultra crystal does not fit the att optimus g
Sent from my LG-E970 using Tapatalk 2
Got the body glove dual protection case from AT&T for my wife's LGOG, it seems to be the best case out at the moment although I hope Seido puts out something soon since I think the case is a little too smooth/slick and it's bound to slip out of her hands at some point in time. Would like something slightly more grippy.
I got one of the cheapo snap together hard cases locally, and the tabs on it snapped when I put it on.
I would avoid these, and for now, go with either the Belkin bumper, body glove, or wait for the speck and otterbox cases to be released.
Anyone have pictures of the case they are using?
I've had good luck with GreatShield screen protectors on my previous phone (SG2). Just ordered some from Amazon, they come 3 to a pack, easy, dry install. I prefer their anti-glare (matte) version though, low drag. The glossy version showed fingerprints and had an annoying drag effect. GreatShield also makes a nice, cheap TPU case but I couldn't find one for the OG.
I have a favor to ask can some one with the AT&T Optimus G and a good scanner the higher the DPI the beater make a scan of the front and back of the phone I have a company that can produce glass screen protectors all they need is a good scan of the phone the higher the DPI the beater. just PM me if you can help. Thanks.
I ordered this case for my e970 as it clearly states that it is for the at&t model. It came in today and of course is for the LS970 instead. It won't fit but it is a cool case. I would actually recommend this of you have the LS970 model.
I also ordered 3 screen protectors from EZ Gaurdz and I can 100% honestly say they are the worst I have ever seen. I've had a couple bad ones before, but these are awful. The cut is horrid and the material is decent at best. They do not come with top and bottom peel off layers like most do.
I've requested a refund on both of the items.
******UPDATE*******
I've received a refund from both sellers for the items. If anyone wants the case they can have it. Just pay shipping. PM me if you're interested. I will weigh it in the morning and update this post with shipping info. It shouldn't be more than a couple bucks for US. I like the case and I'm sad it didn't work out, but at least someone here can use it.
Sent from my LG-E970 using xda premium
*sigh* Well I know two places where NOT to look:
From Trident:
"As of now we do not have any plans.
Regards,
Jacqueline Rodriguez
Executive Assistant "
From Seidio:
"Dear Robert,
Thank you for contacting Seidioonline.com. We appreciate your interest in our products. We have not finalized plans to make any products for the LG Optimus G. Your request has been forwarded to product development. If you would like to stay informed on future product releases for this device, we suggest periodically checking our online store, or you may sign up for email notifications on our website here: http://www.seidioonline.com/Articles.asp?ID=164.
If you have any additional questions or concerns, please feel free to contact us at 832-204-1118.
Thank you,
Seidio Customer Service"
Not getting good mojo right now.
I sent Joel Michael from Cruzerlite a message via Gplus earlier about making a case. I will let you know why he says. Even if he says yes it will still take a month or so before we could have one in hand.
Sent from my LG-E970 using xda premium
vwauditech said:
I sent Joel Michael from Cruzerlite a message via Gplus earlier about making a case. I will let you know why he says. Even if he says yes it will still take a month or so before we could have one in hand.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Well, hopefully they're more receptive!
vwauditech said:
I ordered this case for my e970 as it clearly states that it is for the at&t model. It came in today and of course is for the LS970 instead. It won't fit but it is a cool case. I would actually recommend this of you have the LS970 model.
I also ordered 3 screen protectors from EZ Gaurdz and I can 100% honestly say they are the worst I have ever seen. I've had a couple bad ones before, but these are awful. The cut is horrid and the material is decent at best. They do not come with top and bottom peel off layers like most do.
I've requested a refund on both of the items.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
I tried that same case, same results. The seller was prompt with the refund and told me to keep the case. Guess it's going back up on Ebay. Finally rec'd the GreatShield screen protectors, but they were too long and the cutouts were wrong. The package was labeled LG Optimus G but the fit wasn't even close. Still waiting for that refund (3rd party on Amazon).
TPU Case
See my post at the link for information about a TPU case.
http://forum.xda-developers.com/showpost.php?p=34786302&postcount=11
No doubt Xperia Z3 is a beautiful design and most of the owners are inclined to show its curves, shape and color (specially the copper version) to others. I have been looking for many transparent cases around from different brands. In order to check their reviews, I looked at the reviews for xperia z2 cases by all of them.
My findings: Cheaper options available like yousave are not as transparent as they claim. The gel and silicon based cases are not at all transparent. Most of the transparent cases are susceptible to scratches. I have read good reviews about the tough naked case by CaseMate but the case does not protect the front. Then there is Spigen's case (which is not yet available yet) which has good reviews but the side bumper is made of TPU which is not totally transparent and looks a cheap look. The best reviews I found was for Ringke Fusion case however one really bad thing i have read about it is that if the phone falls, the sides of the case scratch the color off the phone. The case claims to have shock absorption but I fail to understand how they claim it.
If anyone among you have used any case before, please guide and recommend and review.
I was looking for a transparent slim case like this, but I can't find any for the Z3 only the Z3c.
http://www.ebay.com.au/itm/ULTRA-Sl...bilePhoneAccessories&var=&hash=item4187d2b0d6
I bought this one, still wanting for it to arrive here.
http://www.ebay.com/itm/Afan-Ultrat...t=US_Cell_Phone_PDA_Cases&hash=item27eb71f4e7
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
I ordered the Case-Mate Barely There case. It looks and feels OK, although protection is minimal as you'd expect. The cut out on the left is rather large as you can see, to allow the official dock to be used.
The case scratches rather easily. I marked the back by sliding my phone a few centimeters across the desk within an hour of using the case.
Overall, I wouldn't recommend it, due to how easily it scratches.
I'd be really interested to see if anyone handsome photos ofnthe Ringke Fusion case.
Sent from my SGP511 using XDA Free mobile app
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Yes I have also read that case mate barely there scratches easily. I have high hopes from ringke fusion. fingers crossed
heara said:
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Click to expand...
Click to collapse
Is the one from Brando that clear kinda sticky plastic "gel" material?
jhun80 said:
Anybody tried ringke?
cache=83468607623d9aec8d410b1e55df0e93&pi=SY200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1[/url]
Click to expand...
Click to collapse
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
joe198219 said:
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
Click to expand...
Click to collapse
Same. I'm hoping it'll fit the magnetic charger and my front and back tempered glass protectors...
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
se1000 said:
Is the one from Brando that clear kinda sticky plastic "gel" material?
Click to expand...
Click to collapse
well its more like a protector film very thin
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
erasat said:
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
Click to expand...
Click to collapse
The review left by the user wasn't too positive. I ordered this today on Amazon and cancelled it. :/
I finally got mine about 10 days ago, I really love it and to me it looks great, they thought of everything, it even fits the Dual Sim D6633, the left side flap fits perfectly on it, plus they thought of all the Magnetic chargers and even adapters out there so I kind of think that this is the most universal cover for our z3.
BUT, I left them a negative feedback on eBay simply because that's no way of working on the Customer service side, no responses to emails for weeks and after offering me a 15% discount if I kept the order active, I'm still waiting for them to rely to the email I sent dating yes and asking about how was I suppose to receive the credit.
EDIT: SOLD!!
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
danw_oz said:
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
Click to expand...
Click to collapse
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Rinke fusion case
android_fury said:
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Click to expand...
Click to collapse
True! When i got mine, i wondered why it's not as clear as I'd expected it. So i tried wiping it with my handkerchief to see if it's just some dirt or leftover adhesive from the protective film. To my shock, what i was wiping was a scratch already, and i made it even worse by rubbing it. Good thing i have the white z3 compact act so it's not too noticeable. But really disappointed with it's quality. I waited two months for this cause i live in the Philippines. Sigh. Rinke's Fusion case isn't as nice as it advertises.
UPDATE: apologies, there was a sticker on the rear panel. That's why it wasn't as clear and it easily "scratched". my phone looks okay now. Haha
You should take a look at http://aliexpress.com - it might takes 3-4 weeks to ship, but you will find literally a ton of transparent cases from 2$ (incl. shipping).
Got mine also from there - took 3.5 weeks.
I purchased a oneplus 6t a few weeks ago and am now looking for a case with a built in magnetic ring. I have a magnetic mount that I really like using and after my last flight I decided I really want something that can prop my phone up. Funny how little things made me change my mind about the screen size and having a kickstand of sorts. Anyways, I've been looking on Amazon and all the cases I see look like clones of each other and the ones that people review on mention how it is flimsy, provides poor protection and the ring breaks after 4 days. Also the text, auto focus and ultimate experience really turn me off on getting the case.
Currently I'm using the case that came with the phone and I put a ailun magnetic keyring in the back but the bump is starting to annoying me when I place the phone down. Any suggestions?
https://www.aliexpress.com/item/Nil...ll-Back-Cover-for-OnePlus-6T/32890232367.html
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
jmsdvs said:
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
Click to expand...
Click to collapse
Yes, I also ordered that same one from Nillkin through Giztop last week or so .along with their H+Pro screen protector. Hopefully, it will be worth the wait if it ever gets here that is.I will be sure to post my opinions once I get it.
Hope you guys aren't disappointed when you get them. I was looking at possibly getting them, but noticed the case is for the OP6, not 6T. And if you look at the title/description, it says 6, and later 6T, very inconsistently.
https://www.ebay.com/itm/Nillkin-Sy...sh=item260afcf8ca:g:io8AAOSw5wFb-KiG&LH_BIN=1
I ordered my case from ebay, has not arrived yet but the seller is trusted. I have purchased all my cases from the same buyer, takes 2 weeks to get in Finland. And this one is for the 6T, not the 6.
The same casemodel for LG G6 was total rubbish, very flimsy and cheap. But if the pictures are right, this one is totally different. I guess it depend from the shape and size of the phone.
Ok, I've had it on for a couple days now. I actually like it. I can see how it may not provide much protection to glass as the edges are pretty even with the glass. I used to have Loopy case and this is pretty similar. The ring on the back appears to be taped on with 3m tape, but pretty sturdy nonetheless. Works on my magnetic mounts as well. For the price, I say it was worth it for now. The oem case went over the glass too much making the edge difficult to access. Gonna stick with this case.