Mod Edit: ***EACH USER IS RESPONSIBLE FOR WHAT THEY DO WITH THEIR DEVICE, PLEASE READ THIS ENTIRE THREAD BEFORE ATTEMPTING TO USE THIS TUTORIAL***
I finnaly unbricked my and I want to share this tutorial because other people had the same problem as me.
--THIS GUIDE WILL BE QUICK, JUST SOME ESSENTIAL STEPS--
1.Download all drivers, I mean ALL OF THEM
2.Hold power +Vol down/vol up+ vol down/ vol up, something will work, and be sure it says quallcomm hs-usb something, otherwise unbricking will not work,
3. Download this-- https://drive.google.com/file/d/0B8jgOvQH8xoaSDJ5RTQ2Qi1Ib0U/view
4. Run the program called -- fix brock device And Partations And every thing.bat
5.When it says waiting for device hold power button until it vibrates and it shoud say "reported size............"
THAT'S IT! From now you will have boot logo on your screen, then go to fastboot, install twrp, reinstall rom, etc
Click the "Thanks" button if you appreciate my work!
Thanks!
XTutorials said:
I finnaly unbricked my and I want to share this tutorial because other people had the same problem as me.
--THIS GUIDE WILL BE QUICK, JUST SOME ESSENTIAL STEPS--
1.Download all drivers, I mean ALL OF THEM
2.Hold power +Vol down/vol up+ vol down/ vol up, something will work, and be sure it says quallcomm hs-usb something, otherwise unbricking will not work,
3. Download this-- https://drive.google.com/file/d/0B8jgOvQH8xoaSDJ5RTQ2Qi1Ib0U/view
4. Run the program called -- fix brock device And Partations And every thing.bat
5.When it says waiting for device hold power button until it vibrates and it shoud say "reported size............"
THAT'S IT! From now you will have boot logo on your screen, then go to fastboot, install twrp, reinstall rom, etc
Click the "Thanks" button if you appreciate my work!
Thanks!
Click to expand...
Click to collapse
You making this process unwontedly complicated
Akshay6767 said:
You making this process unwontedly complicated
Click to expand...
Click to collapse
Sorry, will make tutorials "easier", now I bricked again my A6010
Download first driver for Qucom and lenovo..
bricked and bricked again, its normal to us, we learn from our mistakes.. btw what kind of mods u hav done leading to hardbrick?
My phone deadboot total using this method,phone no detect on pc after using this method,any solution bro..help??
Bricked Lenovo A6000
I need help with my totaly bricked Lenovo A6000 (dont event get vibrations after using this method )
Thank you
me too, i have lenovo a6000 with logo but continues restart and vibrate, i did this and now phone is dead. nothing. not even detected on pc... :'(
me too totaly bricked....
no detected with PC, nothing...
Any people have experience what I must doing now?
I don't even have vibrations, how the **** am I supposed to do this?
On top of that, ADB doesn't detect my phone, but it's there in ports.
abhieamhie said:
My phone deadboot total using this method,phone no detect on pc after using this method,any solution bro..help??
Click to expand...
Click to collapse
same issue bro please help my phone is also dead using this method:crying::crying::crying:
Thread Closed, requesting OP re-evaluate the tutorial
Related
Yesterday i rooted and tried to install a Rom and used Rom manager to go into recovery mode. I thought you had to do the down+home+power and now when I try to do anything it wont work power button 20 sec , power+home , up/down+power+home,nothing.When i tried plug it into the computer it makes that sound when something failed to connect to the pc. When i tried holding the power button i hear the sound of the device successfully connect to the pc but when i look theres no phone on the computer and when i let go of the power button it stops. Any help would be very much appreciated and i will never do anything to risk my device being broken again... :crying:
Cut and Paste Wrong Forum .
This is the I9300 forum .
You are in the wrong forum see stickie top of the page .
jje
whtnld said:
Yesterday i rooted and tried to install a Rom and used Rom manager to go into recovery mode. I thought you had to do the down+home+power and now when I try to do anything it wont work power button 20 sec , power+home , up/down+power+home,nothing.When i tried plug it into the computer it makes that sound when something failed to connect to the pc. When i tried holding the power button i hear the sound of the device successfully connect to the pc but when i look theres no phone on the computer and when i let go of the power button it stops. Any help would be very much appreciated and i will never do anything to risk my device being broken again... :crying:
Click to expand...
Click to collapse
This forum is for the Galaxy S III - I9300/I9305, AKA International version!
Please post this in the corresponding forum!
LG familyguy59/Beatsleigher
oh...
my bad..
Searched and researched. All says old Volume - and then plug in device and it will enter flash mode.
But I get nothing. Nothing happens at all.
I already have Flash 0.911 installed and I started flash64.exe and pressed flash.
Waited for flash pop up appear and tell me to unplug, turn off device and press back button (in this case Volume -) and plug device to PC.
The flash pop window still there and nothing happens at all.
Please advise.
hsiaolc said:
Searched and researched. All says old Volume - and then plug in device and it will enter flash mode.
But I get nothing. Nothing happens at all.
I already have Flash 0.911 installed and I started flash64.exe and pressed flash.
Waited for flash pop up appear and tell me to unplug, turn off device and press back button (in this case Volume -) and plug device to PC.
The flash pop window still there and nothing happens at all.
Please advise.
Click to expand...
Click to collapse
Did you install the drivers included in flashtool?
Sent from my C5303 using Tapatalk 4
hsiaolc said:
Searched and researched. All says old Volume - and then plug in device and it will enter flash mode.
But I get nothing. Nothing happens at all.
I already have Flash 0.911 installed and I started flash64.exe and pressed flash.
Waited for flash pop up appear and tell me to unplug, turn off device and press back button (in this case Volume -) and plug device to PC.
The flash pop window still there and nothing happens at all.
Please advise.
Click to expand...
Click to collapse
Have you tried following the instructions from Sony, here :http://developer.sonymobile.com/services/flash-tool/.
This may also be useful : http://forum.xda-developers.com/showthread.php?t=2287881.
Worked for me. There's also info on which volume button presses do what.
Please do a bit more searching before posting questions. I found all the information I needed in these forums and on the Sony Developer site
GretaLewd said:
Have you tried following the instructions from Sony, here :http://developer.sonymobile.com/services/flash-tool/.
This may also be useful : http://forum.xda-developers.com/showthread.php?t=2287881.
Worked for me. There's also info on which volume button presses do what.
Please do a bit more searching before posting questions. I found all the information I needed in these forums and on the Sony Developer site
Click to expand...
Click to collapse
Thank you.
I have read the threads and links and still can't find the solution to my problem.
I press volume down and plug in and then Flash tools says I need to install the drivers.
But I've installed the drivers so many times.
I don't understand what's making it to fail and make flash to abort.
Please help.
hsiaolc said:
I have read the threads and links and still can't find the solution to my problem.
I press volume down and plug in and then Flash tools says I need to install the drivers.
But I've installed the drivers so many times.
I don't understand what's making it to fail and make flash to abort.
Please help.
Click to expand...
Click to collapse
Don't know if this will help, but have you tried installing the ADB drivers? Follow the links in the table here: http://developer.sonymobile.com/downloads/drivers/ for you device (311, 312 = WiFi only).
Also (sorry if this is a dumb question) you are connecting/pressing volume key with the tablet powered off?
Try To power off your device, and while still shutting down, with USB cable connected, press VOLUME -
Sent from my SGP321 using xda app-developers app
No not a dumb question. I have the tablet off at all times before pressing volume and then reconnect the tablet.
worf_1977 said:
Try To power off your device, and while still shutting down, with USB cable connected, press VOLUME -
Sent from my SGP321 using xda app-developers app
Click to expand...
Click to collapse
Tried that. Still says Error flashing Aborted. Drivers needed to be installed for connected device.
windows 8 ? Try Pda.net drivers
If it doesn't work u should post a screen or a log to see exactly what's wrong.
Hey ,, i have xperia sp and the same problem with me .. but i installed (flashtool-0.9.15.0) and then installed the suitable drivers .. it works perfectly .. try it ..
at the first time .. it didn't work .. but in the second .. it flashes ..
m_khaldoun said:
Hey ,, i have xperia sp and the same problem with me .. but i installed (flashtool-0.9.15.0) and then installed the suitable drivers .. it works perfectly .. try it ..
at the first time .. it didn't work .. but in the second .. it flashes ..
Click to expand...
Click to collapse
whats mean suitable driver ?
luci morningstar said:
whats mean suitable driver ?
Click to expand...
Click to collapse
Flashtool-drivers.exe inside flashtool folder "drivers".
The only way I got my Z4 Tablet into Flashmode was by using the suggestion on the first page. plug it in, while its turning off hold down the volume button, only then did the LED go full green and flashtool started flashing. Strangely the normal instructions to get into flashmode, holding volume down while plugging in USB cable while OFF, did not work. This does.
I'm afraid I made of hard bricked my note 3 ( yes I know this may be hard to do)... I tried installing clockwork mod and rooting my N900-Canadian Version. I am now a continuous loop in which my phone is trying to continuously go into boot mode not the actual startup screen. ODIN is not detecting it because it's not starting up. I cant put it into any other mode either. What do I do?
johnzors said:
I'm afraid I made of hard bricked my note 3 ( yes I know this may be hard to do)... I tried installing clockwork mod and rooting my N900-Canadian Version. I am now a continuous loop in which my phone is trying to continuously go into boot mode not the actual startup screen. ODIN is not detecting it because it's not starting up. I cant put it into any other mode either. What do I do?
Click to expand...
Click to collapse
i think your device have been soft brick, just with boot loop or loop on recovery, if you use philz's recovery version, you can flash a zip file to resolve the end of this problem, i don't know what recovery version that you're using. Now, you must take your device return the time you begin with the tools like kdz tool, or flash tool on lg devices.
keveinee said:
i think your device have been soft brick, just with boot loop or loop on recovery, if you use philz's recovery version, you can flash a zip file to resolve the end of this problem, i don't know what recovery version that you're using. Now, you must take your device return the time you begin with the tools like kdz tool, or flash tool on lg devices.
Click to expand...
Click to collapse
Thanks for the help.. It's was actually a soft brick then but now my device wont turn on. Can't enter recovery mode at all. It's a hard brick. I've seen a post where they explain how to perform an unbrick but I'm not sure if I need a specific debrick,img file for my N900w8 to mount on my micro SD card. Can you help me out?
johnzors said:
Thanks for the help.. It's was actually a soft brick then but now my device wont turn on. Can't enter recovery mode at all. It's a hard brick. I've seen a post where they explain how to perform an unbrick but I'm not sure if I need a specific debrick,img file for my N900w8 to mount on my micro SD card. Can you help me out?
Click to expand...
Click to collapse
Press and hold 2 key volume up and volume down, and plug in your device to your computer machine. if have "download mode" on screen your phone, your device can be cured and if not. If have, i will help you next steps.
keveinee said:
Press and hold 2 key volume up and volume down, and plug in your device to your computer machine. if have "download mode" on screen your phone, your device can be cured and if not. If have, i will help you next steps.
Click to expand...
Click to collapse
It does not have download mode..There is no Power at all. The phone is hard bricked . Appreciate the help! What do I do?
johnzors said:
It does not have download mode..There is no Power at all. The phone is hard bricked . Appreciate the help! What do I do?
Click to expand...
Click to collapse
charge fully your device first. and do it with my guide ago. maybe you will see "download mode".
keveinee said:
Press and hold 2 key volume up and volume down, and plug in your device to your computer machine. if have "download mode" on screen your phone, your device can be cured and if not. If have, i will help you next steps.
Click to expand...
Click to collapse
Pretty sure that no Samsung phones made in the last couple of years gets into Download Mode like that any more.
OP: You might need a jtag service such as this:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
es0tericcha0s said:
Pretty sure that no Samsung phones made in the last couple of years gets into Download Mode like that any more.
OP: You might need a jtag service such as this:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
Click to expand...
Click to collapse
Thanks a lot! I'd like to try doing it myself before I resort to sending it off somewhere. But if worst comes to worst I'll do that. There has got to be a way to fix this
Hello everyone,
I'm here because I tried so much guides to unbrick my Xiaomi Redmi Note 3 pro SE without any sort of good result...
Mine is stuck on EDL mode (Qualcomm HS-USB QDLoader 9008 thanks to a homemade deep cable).
I can't boot with the power button and I don't know why, it looks like the button doesn't work anymore .
Sometimes, I can boot on fastboot mode by plugging the cable and pressing VOL- and sometimes it doesn't work
Can someone help me to ger rid of this problem please?
Thanks in advance guys
Do not hesitate to ask me more informations, I'll try to give you an answer.
Edit : I just tried this guide en.miui(dot)com/thread-235865-1-1.html and the flash was succesful.
I have now fully access to fastboot mode.
But now my phone keep showing Mi logo and rebooting. Any idea ?
Edit2 : i've done this one now xiaomitips(dot)com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution
But now my phone is showing Mi logo and vibrating then rebooting...
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide
Try it
Click to expand...
Click to collapse
Thanks for the response, i'll try your guide
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Rtxx said:
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Click to expand...
Click to collapse
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Black_Stark said:
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Click to expand...
Click to collapse
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Click to expand...
Click to collapse
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
U can unplug cable. No harm.
Press and hold together vol up + power. And release both immediately with vibration. U will boot into twrp.
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
Press power and volume up while still plugging after
flashing done about 10 second ?
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Rtxx said:
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Click to expand...
Click to collapse
Sad ?
Did you check hardware yet or emmc ?
Leftrand said:
Sad
Did you check hardware yet or emmc ?
Click to expand...
Click to collapse
I don't know what you mean by checking hardware, eveything was working well until I failed my flash and then my phone was bricked.
Hi.
Long story short I hard bricked my LG V30 (I never thought it would happen to me, lol). I have no access to TWERP, download mode or fastboot. I only get the "no command" message.
Reset button dance doesn't do anything except go to no command.
Is there any last resort or should I sell it for parts (as it's in perfect condition otherwise?)
It's the H931
Kind regards,
ZabbenW
You said that you have no access to recovery or download mode, but, just in case and before you do anything risky, verify that you've tried the following exactly:
To enter recovery:
1. Turn off the phone by holding down the power button for several seconds.
2. Hold down the Volume Down and power buttons simultaneously.
3. When the LG logo appears, release just the power button and then press and hold it again.
4. Continue holding both buttons until the "Factory data reset" menu appears.
5. Choose Yes twice. With TWRP installed, it will enter that rather than perform a factory reset.
To enter download mode:
1. Turn off the phone by holding down the power button for several seconds.
2. Hold down the Volume Up button.
3. While still holding it down, connect the phone to a Windows PC with a USB cable.
You can now run patched LGUP on your PC and flash a KDZ.
zabbenw said:
Hi.
Long story short I hard bricked my LG V30 (I never thought it would happen to me, lol). I have no access to TWERP, download mode or fastboot. I only get the "no command" message.
Reset button dance doesn't do anything except go to no command.
Is there any last resort or should I sell it for parts (as it's in perfect condition otherwise?)
It's the H931
Kind regards,
ZabbenW
Click to expand...
Click to collapse
This might help: https://forum.xda-developers.com/t/...mode-hardbirck-with-no-download-mode.4048661/
Make sure you use files for your variant not the Korean one
tech_infinity said:
This might help: https://forum.xda-developers.com/t/...mode-hardbirck-with-no-download-mode.4048661/
Make sure you use files for your variant not the Korean one
Click to expand...
Click to collapse
That's what you need to do. It's somewhat involved, but at least you're not risking anything: The phone is already bricked
Sorry, this is completely unrelated from the current topic but I reallly need help..I tried to flash a rom on my HTC but thr preloader got corrupted xo my phone go hard bricked. Pluging the phone into a computer just shows a red led and the computer shows nothing in device manager.
I tried uninstalling the MTK Preload VCOM driver and reinstalling it but that still didn't work.
Even pressing volume keys while connecting still gave nothing.
I also tried disconnecting the battery and reconnecting the phone to the computer but still nothing.
If there is anyone, please help me.....
I need to unbrick my phone................... I am begging, please help me.
Zteuser21 said:
Sorry, this is completely unrelated from the current topic but I reallly need help..I tried to flash a rom on my HTC
Click to expand...
Click to collapse
This is a forum for the LG V30. You should look for help in whichever forum is for your HTC (or for the most similar model):
HTC
forum.xda-developers.com
TheDannemand said:
That's what you need to do. It's somewhat involved, but at least you're not risking anything: The phone is already bricked
Click to expand...
Click to collapse
Oh wow thanks so much!!!