I hate putting cases on phones. I just want a nice skin on the back to prevent it from scratching when I put it down.
I ordered two, one from DBrand and one from Slickwraps. I received the one from Slickwraps yesterday. Already, within 12 hours, the sides are peeling up. Very bad quality. I hopefully get my DBrand today and I will update with that.
The best skin I have ever used was from Skinja, but they don't have a product out for the S8. Anyone find any good skins for the S8?
I have an S7 edge so I can't speak for the s8 totally, but they're very similar from a skin perspective. I LOVED my dbrand skin, it was comfortable and stayed on perfectly. The edges of the skin on the back of the phone smoothed out as I used it and it was very nice to hold. Their new "dragon skin" skin for the s8 looks very cool and I've seen it in a couple videos. So I'd recommend dbrand from personal experience. I have them on several headphones and phones and they're awesome.
Good to hear. I think the S7 Edge has the same rounded back. That's what's causing the problem for my Slickwraps. It's too stiff of a decal and it peeled right up. Still didn't get the DBrand.. Their shipping is ridiculously slow.
Nevermore said:
Good to hear. I think the S7 Edge has the same rounded back. That's what's causing the problem for my Slickwraps. It's too stiff of a decal and it peeled right up. Still didn't get the DBrand.. Their shipping is ridiculously slow.
Click to expand...
Click to collapse
Keep in mind they are in Canada. So unless you are in Canada it will be a little slower than typical. I was actually impressed with how quick my S7E skins showed up. It has stuck really well. Make sure to watch their install video. It applies different than other skins I've done.
Sent from my SM-G955U using Tapatalk
Thread cleaned.
It's not allowed to advertise your product on XDA.
11. Don’t post with the intention of selling something.
Here is a reminder of the full forum rules: https://forum.xda-developers.com/announcement.php?a=81
Regards,
Wood Man
Forum Moderator
I am currently waiting for my dbrand skin to arrive another good one I used over the years was best skins ever matte.
My DBrand was lost in transit. Their customer support is the slowest. Sent them an e-mail on Friday. They got back to me on Monday. Asked me to confirm my address. Full 24 hours later they got my e-mail saying "Yes". Now it's Wednesday and i'm waiting for them to ship the skin again. I really hope it's worth all this.
I have to throw in my 2 cents. Ordered slickwraps for my S8. The package was okay, but inside there was a crease on the skin for the side, and it wasn't even sticking to the plastic it's shipped in. I emailed support and told them, they said they would send me replacement sides right away. Fast forward about a week later, I haven't received anything. I was going to give it a shot and try it anyway, only to realize I somehow got the Galaxy S8 PLUS skin instead of the S8. I checked the original email order confirmation and it did say S8 Plus. So I most likely goofed, but I won't discount the idea that maybe it was an error on their end.
I realized I had the S8 when I peeled the back off and was about to apply it only to see it was too big. I just put it back on the paper. I emailed the same guy I was dealing with in support, and he told me I was out of luck and the best they could do is give me some slick points. I just want a wrap for my S8. Granted I might have made a mistake but overall with the pieces arriving damaged anyway and not having a replacement for that after a week I give up on Slickwraps. I will try DBrand.
If anyone wants a free slickwrap for their S8, message me. The sides might not stick or they might. Not sure. Replacement sides have not come.
Related
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
naplesbill said:
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
Click to expand...
Click to collapse
Thanks for this review! I am looking for something less bulky than the case-mate. I'll have to check this out when I stop in my local ATT store. How much they selling them for?
I believe it was the usual rip-off price of $35. However, they give me 20% off on accessories at this store (frequent shopper there LOL). I am sure there are better deals, but I did not want to take a chance of messing up my phone before finding a case elsewhere. I paid full retail price so a few extra bones wasn't that big of a deal.
I was planning to return it, but I can't find anything similar online. If I find it online cheaper, I will buy it and return this one for sure. Either way, I am happy enough as it is.
I just bought this case today. I love it! Its like a mix between a hard case and tpu. If you had the bodyglove case on your captivate, you'll love this case. I like the look of the leather back, as I think it adds some class. This case doesn't add that much bulk either.
That was my first choice but the store rep couldn't get it to fit properly so I went with the ballistic even In this case the phone feels tiny in my Herman Munster hands after the infuse in a ballistic case I love this phone just gotta adjust to it
Sent from my SAMSUNG-SGH-I777 using xda premium
I also got this case. I like it a lot, it keeps the same of the phone without adding much bulk at all!
I got this case for my AT&T Galaxy S2 on launch day and I LOVE it. The Ballistics were just ridiculous. As far as getting the case on goes, I couldn't get it to fit at first but if you put it in bottom only, completely lip it; then top, completely lip it; then work the sides, it will always fit perfectly. Sometimes I feel like Gollum caressing my precious Ring with this baby.
Picked up this case today and absolutely love it. It doesn't add much weight to the phone and i feel it still keeps it slimness. As far as fitment goes. It does fit damn tight. I put it on the best I could at the store. I squeezed the sides to get the lip to go over but never could get the bottom corners to cover properly. Once I got home, I took it back out, then put it back on in reverse. This did the trick and it went on a lot easier.
I'm probably going to end up buying this case ASAP... I was interested in it for a while, but was afraid that it may have been too bulky.
Thanks for the feedback guys!
Sent from my SAMSUNG-SGH-I777 using xda premium
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
On another note anyone got the ivisor AG screen protector? not sure i am liking it. It seem to make my screen dim because of the non-glare, cant seem to find any good one on the net, they all seem to be for the international version. things are new so I will wait a bit.
Coldheat1906 said:
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
Click to expand...
Click to collapse
I am on a corporate account through my employer and get 15% off. I asked them about that discount on accessories and they said that it only applies to service plans. I guess I will be returning the case today after work...
jiannichan said:
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
Click to expand...
Click to collapse
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Bigdog1 said:
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
Click to expand...
Click to collapse
What problems are you having with fitment? While it does take a little bit to get it on right, it should still fit. I had problems with the bottom corners until I took it out then put in back on, starting on the opposite end.
axis01 said:
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Click to expand...
Click to collapse
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
I would love a case like this but the wife has the same phone as me. Does anyone know if it comes i white? Or am able to order a different color online?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
jiannichan said:
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
Click to expand...
Click to collapse
That one doesn't look bad. I see they made a large cut out where the power button goes. Don't really care for that big cutout but to each his own. Mine has actually become a lot easier over the last day or so. I guess the compound loosens up over time.
Just got my GS2 today and bought this case at the same time. I wanted something sleek after a Ballistic case on my Infuse and this seemed perfect.
As others have stated it's a tight fit. The sales rep couldn't get it on completely so I had to play with it myself. Another post stated putting bottom and top on first. I had better luck with the sides first. Maybe it is just loosening up after trying 2-3 times to get it on.
The volume and power buttons being covered are going to take getting used to as it takes a good press to work them.
To sum up, love the case so far. Seems to be good quality and good protection.
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
awtryau89 said:
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
Click to expand...
Click to collapse
I had to keep pressing in around the sides to get it to fit perfectly. It took an hour or so to settle in.
Sent from my SAMSUNG-SGH-I777 using xda premium
While there are two distinct OP's regarding skins in this section, there is not set place to see pictures of then without scrolling through 100's of pages to find them.
What I have below is a consolidated picture OP of the skins that I have and future skins to make choosing which skin you want easier. So far I have tried dbrand and Slick Wraps skins for my Nexus 6 and I will write my thoughts of both companies down below as well. I am a bit of an accessories hoarder when it comes to my phones so I'm happy to share more about each one with the forum. I will be buying more skins and updating my OP when I get them with plenty of pictures, don't be afraid to ask for more pictures because I have a plethora of them.
dbrand: dbrand.comdbrand.com
I have been ordering from dbrand for a while now, and I enjoy their skins. They have a nice amount of customization when it comes to phones especially the Nexus line. dbrand offers accents, back skins as well as front skins and you can order them in any arrangement that you choose. Their skins are made with 3M vinyl which means the material is the best quality they can use for skins. The color choices that dbrand offers are fairly standard, but not near as large as some other companies out there. The company ships from Canada which means you can expect the delivery time in the US to be 1-2 weeks. I've had orders take much longer than that (30+ days) but that is not normal and it is caused by USPS's slow movement. The cut of dbrand's skins is very precise leaving you with a virtually edge to edge fit. If you install the skin correctly you will have a fantastic looking device that is sure to attract many looks. I have people ask me if my phone was custom made and how did you get that back etc... with many of the skins that I have used including SW.
SlickWraps (SW): slickwraps.com
Initially I had some issues with SW not sending out shipping emails when I first purchased my Nexus skins. SW rep on the forum (usually Weston, but there are others who use the account) was nice enough to fix everything for me. I then ran into an issue with USPS delivering my package to the wrong address (the correct one was on there) but thats not SW's fault. They shipping my order out swiftly, and it arrived in about 5 days which is great compared to dbrand. SW also uses 3M vinyl which as mentioned above is the best material for skins. They also have custom colors made by 3M for them and a couple of other companies. Their color selection is superior to any other company so far, and they offer the Motorola "M" cutout on their Nexus 6 skins. Some people may like this while others may not (I personally like it). SW makes back skins, frame skins, and front skins which can give you a nice 360 degree coverage on your phone. SW also has a "goof" policy which states that SW will replace your skin if you "goof" up the install. This is great for those of us that aren't the best at installing skins or are new to it and make a mistake. Their skins fit is identical to dbrand in my experience so you don't have to worry about which one fits better. It's a matter of preference and what color/style of skin you want to buy. It should also be noted that SW does accept custom orders for skins. I ordered some without the Motorola "M" cutout and and another with just the Nexus "X". If you are on the edge between the two companies the option to have your skin customized should aide with that decision. If you contact Slickwraps (send Weston a message) with your order # and request he will do his best to accommodate you. I will post pictures of the "custom" ones I ordered below in addition to the regular skins.
I recommend both companies skins based on my experiences, and I hope this guide helps you decide what is better for you.
Carbon Fiber:
The texture is very subtle on this skin and it provides more grip than the stock plastic back. The look is unmistakably carbon fiber, but we know the skin is made out of vinyl. The skin itself is moderately reflective while maintaining the nice style of carbon fiber.
Red (dbrand)
Black (dbrand)
Blue (dbrand)
Green (SW)
Metal:
The texture of this is very similar to raw steel or aluminum with lines/ridges running along the vinyl. The feel is very slightly "ribbed" and is slightly more slippery than the carbon skins above. The skin is moderately reflective depending on which color you get. Each color has a "metal" like undertone if you look at it in the correct lighting.
Silver Titanium (dbrand)
Black Titanium
Leather:
This skin has a very nice leather look to it. There are a couple different styles of texturing as far as the leather look goes. I have the brown leather one pictured below for reference . The skin is not very reflective at all and has the most grip out of all of the textures. The feel is soft and very close to synthetic leather. My wife described it as a "snakeskin texture" and was quite impressed by it.
Brown (SW)
White "Alligator" (SW)
Color:
The "color" skins are exactly that, different colors without having any real texture. The skins have a low reflectiveness and are generally smooth with a very subtle texturing. Their texture is almost identical to the "matte" skins. There isn't much else to say about these, but note that they are more "grippy" than the factory back. These skins don't attract or show fingerprints from what I have seen.
Blue (dbrand)
Matte:
The matte skins are an almost identical texture to the color series which means they are generally very smooth. As the name suggests the skin is indeed "matte" with virtually no reflectiveness to it. The skins is quite "slippery" but it still has more grip that the phone without one.
Update: Other users have reported that they don't have any issues with fingerprints showing up. The fingerprints and oil issue may just be my hands, however I will see if other members experience the same thing that I did. As always everyone's experience can vary based on how "oily" their hands are naturally.
Black (dbrand)
Here are some quick guides that I made on installing and removing the vinyl skins:
Removal (Slickwraps)
https://www.youtube.com/watch?v=ueAoROEB_tY
Installation (Slickwraps)
https://www.youtube.com/watch?v=G_DXoYgpLEs
Installation of the dbrand front skin:
https://www.youtube.com/watch?v=coyWtBvN2WQ&feature=youtu.be
Installation of the SlickWraps side skin:
https://www.youtube.com/watch?v=gNjjziStkNo&feature=youtu.be
MODS:
Off topic discussion is allowed to an extent, but I do not want any "x company is better than y" or bashing in my OP. Personal experiences are okay as long as they follow the forums rules and don't "bash" any company in a manner which could be taken the wrong way.
Please be respectful of your fellow forums members and don't start any arguing in my OP or you will be reported. There is too much OT arguing on here lately and thats not what this forum is for. Remember we are all here to help each other
All of the Skins that I currently have together:
new pictures are in a post down below due the restriction of 60 images per post with the 'img' tag.(See post #4)
Update [12/20]
I will add/revise to this OP even though I no longer own a Nexus 6 (moved on to the 6P). I still have a fair amount of skins, and will gladly answer any questions regarding any of the ones in this OP or in general.
I've used multiple skins from both companies on my nexus 5 and i found both had pros and cons.
Here are my experiences.
dbrand:
Pros - great price, modular purchasing, quick delivery, great textures, thick vinyl (feels quality and durable) . good side parts.
Cons - my nexus just didn't want to align with the cut outs. Glue seeped from the sides and had to be trimmed otherwise a thick, white edge would be visible
Slickwraps:
Pros - for my nexus, a more accurate cutting, no seepage (except on one design which I got a free replacement for), great customer service
Cons - felt less textured and thinner. Didn't like how the sides fit as much.
These are my personal experiences with my nexus 5. They will differ to those of others.
Overall I've enjoyed using both and wouldn't hesitate to recommend either company. They're both really good at what they do. I've had both, I'll have both again.
Pilz said:
While there are two distinct OP's regarding skins in this section, there is not set place to see pictures of then without scrolling through 100's of pages to find them.
What I have below is a consolidated picture OP of the skins that I have and future skins to make choosing which skin you want easier. So far I have tried dbrand and Slick Wraps skins for my Nexus 6 and I will write my thoughts of both companies down below as well. I am a bit of an accessories hoarder when it comes to my phones so I'm happy to share more about each one with the forum. I will be buying more skins and updating my OP when I get them with plenty of pictures, don't be afraid to ask for more pictures because I have a plethora of them.
dbrand: dbrand.comdbrand.com
I have been ordering from dbrand for a while now, and I enjoy their skins. They have a nice amount of customization when it comes to phones especially the Nexus line. dbrand offers accents, back skins as well as front skins and you can order them in any arrangement that you choose. Their skins are made with 3M vinyl which means the material is the best quality they can use for skins. The color choices that dbrand offers are fairly standard, but not near as large as some other companies out there. The company ships from Canada which means you can expect the delivery time in the US to be 1-2 weeks. I've had orders take much longer than that (30+ days) but that is not normal and it is caused by USPS's slow movement. The cut of dbrand's skins is very precise leaving you with a virtually edge to edge fit. If you install the skin correctly you will have a fantastic looking device that is sure to attract many looks. I have people ask me if my phone was custom made and how did you get that back etc... with many of the skins that I have used including SW.
SlickWraps (SW): slickwraps.com
Initially I had some issues with SW not sending out shipping emails when I first purchased my Nexus skins. SW rep on the forum (usually Weston, but there are others who use the account) was nice enough to fix everything for me. I then ran into an issue with USPS delivering my package to the wrong address (the correct one was on there) but thats not SW's fault. They shipping my order out swiftly, and it arrived in about 5 days which is great compared to dbrand. SW also uses 3M vinyl which as mentioned above is the best material for skins. They also have custom colors made by 3M for them and a couple of other companies. Their color selection is superior to any other company so far, and they offer the Motorola "M" cutout on their Nexus 6 skins. Some people may like this while others may not (I personally like it). SW makes back skins, frame skins, and front skins which can give you a nice 360 degree coverage on your phone. SW also has a "goof" policy which states that SW will replace your skin if you "goof" up the install. This is great for those of us that aren't the best at installing skins or are new to it and make a mistake. Their skins fit is identical to dbrand in my experience so you don't have to worry about which one fits better. It's a matter of preference and what color/style of skin you want to buy.
I recommend both companies skins based on my experiences, and I hope this guide helps you decide what is better for you.
Coming soon:
Purple Carbon (SW)
Alligator White Leather (SW)
Edit: Pictures fixed!
Click to expand...
Click to collapse
Thanks for these!!! I'm curious, do you switch your skins often? Do they remove fairly easily and put back on the backing for later use? Or is it a one and done type thing. I'm looking at buying a few of these and have never used either company before. Thanks again!
Green Only "X" cutout (SW)
Purple (SW)
Orange no cutouts (SW)
Silver (SW)
Natural Series
There are a variety of "skins" in the natural series ranging from real cork to Horween Leather. I have the Bamboo posted below and soon I will have the leather ones. The bamboo is exactly that, bamboo. It is smooth as you would expect but you can still feel the grain which gives it a nice subtle texture. There is not real "grip" with the real bamboo, but lets be honest we buy the bamboo for how it looks. The bamboo is thicker than the standard skin so be careful when you buy it because not all cases may work. It does work with the Spigen Ultra Hybrid but it makes the screen virtually flush with the case. The bamboo is about as thick as a tempered glass screen protector and its flexible enough to curve with the phone. The adhesive works really well on the phone and is much stronger than the standard ones. To sum it up you won't be disappointed with the bamboo!
Real Horween Leather:
The Horween leather "skins" if you call them that are excellent quality. They look feel and even smell as good as you would expect leather to. SlickWraps uses the same leather as the Moto X 2014 so you know that its quality leather. I currently have the Dark Brown (football will be here Friday 2/13) and I could not be happier. The leather can be installed instead of the factory back which allows it to sit flush with the frame to give you that "factory fresh" OEM look. These are the best hands down "skin" you can buy at the moment. The leather will give you a huge amount of grip compared to the stock OEM back plate not to mention the nice look it provides. The leather itself is thicker than a standard skin as you would expect and comes in close to the bamboo's thickness. Using a case over the leather will be hard without using it as a replacement back. I also had a piece custom cut to fit the back of my Spigen Ultra Hybrid case so that I can have more grip than the slippery clear PC back it has. Overall you cannot go wrong with Horween leather and if you want a unique phone use it as a back replacement its a simple process. There is a guide here on XDA by another member showing the process (I did it and it took ~15 minutes from start to finish)
Dark Brown Horween Leather:
(I "aged" my leather on my phone so it looked more broken in because leather looks better when it gets used )
Camera Accent and Motorola "M" are from dbrand
Bamboo:
[URL=http://s39.photobucket.com/user/Tmpilz/media/Bamboo%20Nexus%206/IMG_20150130_162431437_HDR%202.jpg.html]
woah I don't even like green color that much but daaang! this green looks awesome on the phone!
thanks for the pics !
th3xeroeagle said:
woah I don't even like green color that much but daaang! this green looks awesome on the phone!
thanks for the pics !
Click to expand...
Click to collapse
Its brighter than I imagined, but it looks awesome with the blue supcase and blue camera accent. Its going to be my DD for a while.
I've has issues with slicks wraps and won't ever purchase from them again. I made a comment on a dbrand Facebook post about the crap slick starts on XDA. Slickwrapa went on my Facebook and found my company and wrote in to all the officers of my company stating I was harassing them. They even went as far to screen shot my facebook comments and demand my work change our internet policy. I'm an honest buyer and give honest reviews. But I can not believe the amount of effort they went through to track me down and treaten my place of work for something I posted on Facebook on the weekend.
1SiK1500 said:
I've has issues with slicks wraps and won't ever purchase from them again. I made a comment on a dbrand Facebook post about the crap slick starts on XDA. Slickwrapa went on my Facebook and found my company and wrote in to all the officers of my company stating I was harassing them. They even went as far to screen shot my facebook comments and demand my work change our internet policy. I'm an honest buyer and give honest reviews. But I can not believe the amount of effort they went through to track me down and treaten my place of work for something I posted on Facebook on the weekend.
Click to expand...
Click to collapse
That is rather unfortunate I never use my social media accounts for anything other than connecting with friends and family. I also don't have my real name on there for privacy reasons I keep it minimal and my friends know this. I'm sorry to hear about that, I believe I read about your experience on the 'posts to page' section on FB. I would not tolerate someone harassing me because what you do outside of work is your business not your companies. It's not my business to comment on these thing, but I hope that you can get this sorted out.
Now that I'm sufficiently of topic I wanted to say that I'm going to get some more dbrand skins as well. I was thinking about matte white and maybe another color series one. Does anyone have recommendations or want to see any in particular?
I'm rather found of the titanium skin on the blue nexus. I'll post some pictures soon.
1SiK1500 said:
I'm rather found of the titanium skin on the blue nexus. I'll post some pictures soon.
Click to expand...
Click to collapse
That was my favorite skin but I only had it on my phone for a short time because of a RMA. My Nexus is now the cloud white color so that's why I have both colors pictured above. The leather looks nice too on the CW Nexus. I'll see how the purple one turns out when it arrives.
Edit: I'll update you guys when I get a shipping notice from SW for my purple CF and white leather skins.
SW skins seek be here by Friday. Look for pictures then, I will update the OP.
Pilz said:
SW skins seek be here by Friday. Look for pictures then, I will update the OP.
Click to expand...
Click to collapse
Pilz.
Superb work chap. I actually spend days scouring both the DB and SW thread for pictures. Living in the U.K things get slightly inconvenient when importing products over from the states.
Just before you started this thread I ended up placing an order for a couple of skins from SW mainly because I liked the way Weston conducts himself on here.
Seeing your old MB on a titanium looks lovely. This will be the first I install. How did you find it in terms of fingerprinting?
Also how would you say these types of skins would fair against repeatedly placing and removing from a leather pouch?
Regards
S
ShahV said:
Pilz.
Superb work chap. I actually spend days scouring both the DB and SW thread for pictures. Living in the U.K things get slightly inconvenient when importing products over from the states.
Just before you started this thread I ended up placing an order for a couple of skins from SW mainly because I liked the way Weston conducts himself on here.
Seeing your old MB on a titanium looks lovely. This will be the first I install. How did you find it in terms of fingerprinting?
Also how would you say these types of skins would fair against repeatedly placing and removing from a leather pouch?
Regards
S
Click to expand...
Click to collapse
Thank you for the kind words!
The MB and titanium skin was my favorite set up until I got the cloud white Nexus.
The only one that attracted fingerprints was the matte black, all of the other ones were great at no shoeing finger prints.
I think all of the skins would be fine in s leather pouch with the exception of the 'leather' skin. My only concern with the leather style skin is the amount of grip it had compared to the other skins. It has a softer feel to it which over time could wear from going into and out if a pouch. I've never had any skin start to peel on me and I had the same skin on one of my G3's for 4-5months.
I use a case on my phone and I also have a pouch (not a leather one) and even with the constant changing of cases I haven't had any issues. If you have any other questions please feel free to ask away. I just started my spring semester so I will do my best to respond in a timely manner, but engineering work gets very time consuming.
This is really making me want a leather one. I may have to pull the trigger on it
Sent from my Nexus 6 using Tapatalk
iomthd said:
This is really making me want a leather one. I may have to pull the trigger on it
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
If you aren't sure my white one is coming by Friday (alligator texture) and I could post more pictures of my brown leather one. It has a nice feel and the most grip out of all the textures. I think the wood skins are a close second, but I don't have on currently. I might get the mahogany or teak in the future.
I am open to suggestions for skins if anyone wants to see one in particular I will consider it for my next order.
Great points. Here are my thoughts on the 2 brands as I've had both for the Nexus 6. I did note that the Nexus logo on the dbrand is a little wider than the one on the slickwraps. Other from that, I prefer the M logo versus the filled or exposed circle. I feel like the exposed circle breaks the lines, but the filled one leaves a big empty gap that looks a little off. On the other hand, I like the M logo, but the edge of the middle of the M is sharp and has me worried that it may eventually peel. time should tell.
dbrand
Pros:
- Great customer service! My initial order went missing over 15 days. I emailed them about it, and they immediately sent out replacement ones.
- More customization options on the site in regards to the Nexus logo and the circle.
- Website allows you to see what it will look like with the color phone you have and not covering the sides
Cons:
- Shipping to me is terrible. the replacement order that they sent me? I'm still waiting on it. And it's been close to a month. I actually ordered more of them because of the great customer service. So I have 2 seperate orders that were shipped on 12/12 that I have yet to receive.
slickwraps
Pros:
- Colors! Tons of selection of colors and styles. I'm in CF heaven right now
- More coverage. If you want to cover the sides, you have the option. slickwraps seems to do a good job of offering coverage of the sides and corners. I noticed this on the iPhone 6 as well, where the wrap goes completely around the corners
- Shipping is fast and free. I chose the slowest/free method, and I received mine in about a week. (I was away at CES, so I don't know exactly when it arrived.) Compared to paying $3 for shipping, it taking a month now....
Cons:
- Website experience isn't as good. Not sure if it's my computer or not, but using Chrome, I can't hit the devices button. So I can never get to the nexus 6 page without googling it. Works fine in IE. Also, when I select Back Only, I wish it would show the back only. This would give me a better idea of what it will like.
Overall, I started out using dbrand since they had great customer service, and they were the first to have N6 wraps available. However, I may still with slickwraps for now since they have the M logo cutout (which I prefer,) and shipping to me is a lot quicker and free. Both have excellent products and I don't think you can go wrong with either one.
The purple CF and white leather (alligator texture) arrived today. Pictures will be up soon
Pilz said:
The purple CF and white leather (alligator texture) arrived today. Pictures will be up soon
Click to expand...
Click to collapse
USPS is on the ball yet again.
You ordered this Monday?
Free Shipping to USA is pretty badass.
Weston
Slickwraps.com
slickwraps said:
USPS is on the ball yet again.
You ordered this Monday?
Free Shipping to USA is pretty badass.
Weston
Slickwraps.com
Click to expand...
Click to collapse
Yes I believe so, and USPS actually put my mail in the right mailbox this time!
I updated the OP with new pictures. I will take better ones when its daylight tomorrow if I get some free time.
I have Orange CF and another Green CF coming from SW with some changes check back for pictures and updates.
I managed to get a skin/wrap ready for the OP5 tonight. It fits and feels pretty dad gum good, and has loads and loads of grip to it. You will be pleasantly surprised at just how good it looks and feels.
Ready to order now and will start shipping tomorrow.
Disclaimer: I wasn't planning on getting it done this fast, much less did I think I would be beating dBrand to the punch. But I knew people would be wanting something. At any rate, I will try to get an installation video up and running for yall in the next couple of days. If I don't, it installs just like all of the other ones. I also don't have any promo materials ready yet. So expect a skin in an envelope, until I can get the rest of my stuff done.
Buy with confidence. And thanks for looking.
Until I get ten posts in, I cannot post the link. Search OnePlus 5 skin on ebay, or here is the full title.
OnePlus 5 .46mm Skin Rubber Wrap Sticker Decal Super Grippy Thin **Ships TODAY**
I will check it out. Thank you!
Affriction Skins said:
I managed to get a skin/wrap ready for the OP5 tonight. It fits and feels pretty dad gum good, and has loads and loads of grip to it. You will be pleasantly surprised at just how good it looks and feels.
Ready to order now and will start shipping tomorrow.
Disclaimer: I wasn't planning on getting it done this fast, much less did I think I would be beating dBrand to the punch. But I knew people would be wanting something. At any rate, I will try to get an installation video up and running for yall in the next couple of days. If I don't, it installs just like all of the other ones. I also don't have any promo materials ready yet. So expect a skin in an envelope, until I can get the rest of my stuff done.
Buy with confidence. And thanks for looking.
Until I get ten posts in, I cannot post the link. Search OnePlus 5 skin on ebay, or here is the full title.
OnePlus 5 .46mm Skin Rubber Wrap Sticker Decal Super Grippy Thin **Ships TODAY**
Click to expand...
Click to collapse
Couldn't find it, which country is your stsore based, i'm in the UK
yetiweston said:
Couldn't find it, which country is your stsore based, i'm in the UK
Click to expand...
Click to collapse
I just have it in the states right now. More or less did the OP5 as a priority because I knew there wouldn't be a lot of options for people. But I am still a couple of weeks away from a full launch. Maybe someone will post the link. I feel kind of funny running around here making bs posts in order to do it myself.
No worries, I've ordered some from D-Brand and a case of eBay. Wanted one off Oneplus but totally sold out
Affriction Skins said:
I managed to get a skin/wrap ready for the OP5 tonight. It fits and feels pretty dad gum good, and has loads and loads of grip to it. You will be pleasantly surprised at just how good it looks and feels.
Ready to order now and will start shipping tomorrow.
Disclaimer: I wasn't planning on getting it done this fast, much less did I think I would be beating dBrand to the punch. But I knew people would be wanting something. At any rate, I will try to get an installation video up and running for yall in the next couple of days. If I don't, it installs just like all of the other ones. I also don't have any promo materials ready yet. So expect a skin in an envelope, until I can get the rest of my stuff done.
Buy with confidence. And thanks for looking.
Until I get ten posts in, I cannot post the link. Search OnePlus 5 skin on ebay, or here is the full title.
OnePlus 5 .46mm Skin Rubber Wrap Sticker Decal Super Grippy Thin **Ships TODAY**
Click to expand...
Click to collapse
http://r.ebay.com/z1E9nM
Looking at the pics I'd be down with a thin tpu case that looked like this.
sodomanaz said:
Looking at the pics I'd be down with a thin tpu case that looked like this.
Click to expand...
Click to collapse
I have thought about buying the chinese version of the peel cases and doing just that, but I don't know how well it would work.
On a side note. I have added in a make offer option and set it up to accept $9.99.
I purchased a oneplus 6t a few weeks ago and am now looking for a case with a built in magnetic ring. I have a magnetic mount that I really like using and after my last flight I decided I really want something that can prop my phone up. Funny how little things made me change my mind about the screen size and having a kickstand of sorts. Anyways, I've been looking on Amazon and all the cases I see look like clones of each other and the ones that people review on mention how it is flimsy, provides poor protection and the ring breaks after 4 days. Also the text, auto focus and ultimate experience really turn me off on getting the case.
Currently I'm using the case that came with the phone and I put a ailun magnetic keyring in the back but the bump is starting to annoying me when I place the phone down. Any suggestions?
https://www.aliexpress.com/item/Nil...ll-Back-Cover-for-OnePlus-6T/32890232367.html
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
jmsdvs said:
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
Click to expand...
Click to collapse
Yes, I also ordered that same one from Nillkin through Giztop last week or so .along with their H+Pro screen protector. Hopefully, it will be worth the wait if it ever gets here that is.I will be sure to post my opinions once I get it.
Hope you guys aren't disappointed when you get them. I was looking at possibly getting them, but noticed the case is for the OP6, not 6T. And if you look at the title/description, it says 6, and later 6T, very inconsistently.
https://www.ebay.com/itm/Nillkin-Sy...sh=item260afcf8ca:g:io8AAOSw5wFb-KiG&LH_BIN=1
I ordered my case from ebay, has not arrived yet but the seller is trusted. I have purchased all my cases from the same buyer, takes 2 weeks to get in Finland. And this one is for the 6T, not the 6.
The same casemodel for LG G6 was total rubbish, very flimsy and cheap. But if the pictures are right, this one is totally different. I guess it depend from the shape and size of the phone.
Ok, I've had it on for a couple days now. I actually like it. I can see how it may not provide much protection to glass as the edges are pretty even with the glass. I used to have Loopy case and this is pretty similar. The ring on the back appears to be taped on with 3m tape, but pretty sturdy nonetheless. Works on my magnetic mounts as well. For the price, I say it was worth it for now. The oem case went over the glass too much making the edge difficult to access. Gonna stick with this case.
Just bought hoping to have in a week...DBrand shows backordered?
https://sopiguard.com/
Same here. I pre-ordered mine from dbrand (out of habit) in August. It still shows a pre-order status. I bought and received a sopiguard skin this week.
Yep canceled my dbrand order on Friday and ordered sopi which is scheduled for Tues delivery.
tCizler said:
Same here. I pre-ordered mine from dbrand (out of habit) in August. It still shows a pre-order status. I bought and received a sopiguard skin this week.
Click to expand...
Click to collapse
Not a skin person but just want to those small scratches away.
Hearing some people are getting a lot of abrasion style scratches on both the outside and inside?
I hear it added grip also?
How are you liking it? Was it easy to get the bubbles out?
Should have mine Tuesday.
Got white carbon fiber.
Wow these guys are fast!!
Easy to install and should help with small scratches.
Wanted to update but got delayed because I didn't get any response from Sopiguard?
After installing the skin the next day I picked up my phone from the kitchen and put it in my office when I noticed the skin had already scratched?
There was no force or impact just picking it up and setting it down.
WHat made it worse is I DM and emailed these guys and no response sisnce monday?
They said the emailed me but I didnt get anything so there customer service is terrible.
Save your $20.
best image hosting
Scratched upper top right
I received the 3M carbon skin very quickly. It is very nice and went on without any bubble issues. I noticed that it was missing the Microsoft logo, but wasn't sure if it is a separate sticker. The website shows the black carbon with black embossed logo.
Looks like the Black carbon does not have an embossed logo. You would need to pay extra for a cutout that shows the logo. Website pics made it look like it had an embossed logo. Not the friendliest Sopi customer service. Seem a bit sarcastic.
terracode said:
Looks like the Black carbon does not have an embossed logo. You would need to pay extra for a cutout that shows the logo. Website pics made it look like it had an embossed logo. Not the friendliest Sopi customer service. Seem a bit sarcastic.
Click to expand...
Click to collapse
Funny you would say that...these guys are JERKS!!!
I sent them an email saying how disappointed I was in how fast the skin scratched and not even any pressure.
They responded back which panel so they could send me a new one...2nd email said $5.00 charge?
I said never mind Dbrand had already shipped and that I would follow up here in their shin was not worth the cost because it scratched 1st night and then started harassing me to the point I blocked their emails.
This skin is purely cosmetic and wears really bad with no stress needed.
Dbrand is a little more but so much better on customer service!
The 3M Black Carbon seems to not mar as easy as the white carbon. So far looks fine and no scrapes.
Liking the dbdand carbon skins. Very good quality.
I have put on a SopiGuard leatherette skin and it is a game changer because it is a little grippy. BUT, I am trying to get Latercase to move up the Duo in their order - especially as they would not need to create a mold for their carbon fiber cases - just cut it from a sheet. THAT would provide additional protection 0.6mm and, I think, not interfere with the hinge.
Go vote up Surface Duo on LaterCase - https://latercase.com/