So I tried to flash TWRP with Flashr on my J3, but when I booted into recovery a blue screen came up saying that system software not authorized by AT&T was found on your device. I got nervous and decided to flash a stock firmware on to my J3, but it fails every time. I finally got to like 10% but then it failed and a blue screen saying,"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software." Smart Switch crashes every time I put in my serial number though so now I'm stuck with a bricked phone. Any help would be greatly appreciated :fingers-crossed:
lolcoder124 said:
So I tried to flash TWRP with Flashr on my J3, but when I booted into recovery a blue screen came up saying that system software not authorized by AT&T was found on your device. I got nervous and decided to flash a stock firmware on to my J3, but it fails every time. I finally got to like 10% but then it failed and a blue screen saying,"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software." Smart Switch crashes every time I put in my serial number though so now I'm stuck with a bricked phone. Any help would be greatly appreciated :fingers-crossed:
Click to expand...
Click to collapse
Try flashing again with Odin, but this time use older versions, maybe v3.10.6 or v3.09.
Solution
I flashed a random root file that I found on another xda post and it managed to boot.
lolcoder124 said:
I flashed a random root file that I found on another xda post and it managed to boot.
Click to expand...
Click to collapse
Next time, try not to flash files blindly, because any file that is wrong can brick your phone.
Related
My device is new model in my country named 'Infocus M2'. I rooted this phone few days ago via a Chinese desktop software. Everything was working fine until today when software update came. I downloaded the update and phone stock recovery opened and then android with exclamation mark came. I restarted phone but it stuck on boot loop. I didn't install any recovery like CWM/TWRP or didnt flash any rom. Just rooted the phone. Any help guys?? My device is MediaTek 6582 and now recovery is also not opening.
Same here
Me to Having the same issue no resolution yet
DbzMihir said:
Me to Having the same issue no resolution yet
Click to expand...
Click to collapse
I visited the service center today. They are telling that Rom is corrupted, so we have to change the motherboard. They were saying that they will possibly deliver in 4-5 days.
They told me may be a software issue if resolved then will give by 2-3 days.
What I feel is the Chinese rooting software curropted the recovery and thus its not going to recovery also. So that may be the issue however unless someone posts how to flash the recovery we are helpless
I need help immediately cause I am paniking. So I rooted my phone using the KingRoot application, and after the root was succesful used SuperSu-Me to remove KingRoot. SuperSu-Me installed SuperSU on my device which in turn had to install an update, so I let it do its thing. After the update was installed SuperSU prompted me to reboot my phone so i did. Problem is the phone has been stuck for about half an hour in the shifting shapes screen, fastboot doesn't work. I have tried hard reseting it but the problem persists.
JimmyTsiakalos said:
I need help immediately cause I am paniking. So I rooted my phone using the KingRoot application, and after the root was succesful used SuperSu-Me to remove KingRoot. SuperSu-Me installed SuperSU on my device which in turn had to install an update, so I let it do its thing. After the update was installed SuperSU prompted me to reboot my phone so i did. Problem is the phone has been stuck for about half an hour in the shifting shapes screen, fastboot doesn't work. I have tried hard reseting it but the problem persists.
Click to expand...
Click to collapse
Kingroot is not good afaik. Follow this guide to root or unlock.
http://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830/page1
JimmyTsiakalos said:
I need help immediately cause I am paniking. So I rooted my phone using the KingRoot application, and after the root was succesful used SuperSu-Me to remove KingRoot. SuperSu-Me installed SuperSU on my device which in turn had to install an update, so I let it do its thing. After the update was installed SuperSU prompted me to reboot my phone so i did. Problem is the phone has been stuck for about half an hour in the shifting shapes screen, fastboot doesn't work. I have tried hard reseting it but the problem persists.
Click to expand...
Click to collapse
Found a solution?
My solution
I fixed it by unlocking the bootloader in fastboot mode, flashing TWRP and using it to flash the original version of the oxygen os, the one that came preloaded with the phone.
Please help me too I'm literally panicking this is my one and only device and it happened just like exactly yours. After supersume asked to reboot my phone now it is stuck on the phone logo screen. Help me pleaaase (( My phone is very important to me. I've been searching for forums and I only found yours that had the same problem with me. By now it's about 1hr just stuck in there ( please help me im begging you!
Yobel14 said:
Please help me too I'm literally panicking this is my one and only device and it happened just like exactly yours. After supersume asked to reboot my phone now it is stuck on the phone logo screen. Help me pleaaase (( My phone is very important to me. I've been searching for forums and I only found yours that had the same problem with me. By now it's about 1hr just stuck in there ( please help me im begging you!
Click to expand...
Click to collapse
Does your recovery work? And also, which recovery do you have?
aamodjoshi23 said:
Does your recovery work? And also, which recovery do you have?
Click to expand...
Click to collapse
Thank you for replying. I'm sorry I don't know what a recovery is. My phone is Starmobile Knight luxe lollipop 5.1 . Help I cant afford to buy a new one What would I do in this situation . I'm thinking of removing the battery then putting back it again. It won't even turn off just stucked on the logo.
JimmyTsiakalos said:
I fixed it by unlocking the bootloader in fastboot mode, flashing TWRP and using it to flash the original version of the oxygen os, the one that came preloaded with the phone.
Click to expand...
Click to collapse
can you please tell me how to flash twrp recovery on pc? mine says partition "recovery" does not support. basically it fails
Yobel14 said:
Thank you for replying. I'm sorry I don't know what a recovery is. My phone is Starmobile Knight luxe lollipop 5.1 . Help I cant afford to buy a new one What would I do in this situation . I'm thinking of removing the battery then putting back it again. It won't even turn off just stucked on the logo.
Click to expand...
Click to collapse
First, please don't follow instructions you're finding on this specific forum since it's for the OnePlus X, not the Starmobile. Secondly you needed to unlock your bootloader first, since you didn't from the sounds of it you can't boot into Android since it's now tampered. You'll need to boot into recovery, usually by pressing Power + Volume Down until it loads and factory reset your device.
Yobel14 said:
Thank you for replying. I'm sorry I don't know what a recovery is. My phone is Starmobile Knight luxe lollipop 5.1 . Help I cant afford to buy a new one What would I do in this situation . I'm thinking of removing the battery then putting back it again. It won't even turn off just stucked on the logo.
Click to expand...
Click to collapse
Try to find out your solution in your device's forums, since this forums is for the OnePlus X and not the Starmobile Knight Luxe.
If your device is stuck on the bootup screen, you need to go to fastboot mode, unlock the bootloader (if you haven't), flash a custom recovery, boot into the recovery, and factory reset the device. It should work.
Guys!!! Thank you for all your suggestions. I did flash a custom recovery but it fails simultaneously. I just let it fix on a local phone repair shop just paid a few bucks
I tried to unroot my device but it got stuck in a bootloop, so I did some research and decided to restore it with smartswitch, it failed (I have no idea why) at around 70 percent.
The device is now showing me "An error occurred while updating the device software. Use the emergency recovery function in the smart switch pc software,
I tried to do a ton of times, I tried both the the emrgency recovery and the other option (I don't remember how it's called) and they won't work! The files are downloaded but then when the process starts it always gets stuck at 0 percent! I also tried to install the drivers, nothing
I alaso tried to flash a stock rom (no brand but I'm using TIM) and it immediately failed.
The device is a samsung s6 SM-G920F, it had 6.0.1 and m brand is TIM. Odin version is 3.12.3. I'm dowloading another stock firmware with my brand and 6.0.1, hopefully, does someone know why everything is not working?
Please help I'm going crazy
You may have to send your device back to your manufacture to get it fixed
Sent from my Transformer TF101 using Tapatalk
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us
This does sounds surprising but apparently, my phone got bricked while I was restoring it to factory default settings.
Now the boot screen shows up for a minute and then the phone restarts back to the boot screen again and again.
Please help me, how can I unbrick my phone.
if all fail, try 2 point flash, need to open the case to acces the back of the phone. find youtube for more precise info. can be done yourself if u don't give up unless there is hardware trouble.
i give some link
akbar28 said:
This does sounds surprising but apparently, my phone got bricked while I was restoring it to factory default settings.
Now the boot screen shows up for a minute and then the phone restarts back to the boot screen again and again.
Please help me, how can I unbrick my phone.
Click to expand...
Click to collapse
Download the right fastboot ROM and flash it with mi flashtool
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com