A fast, smooth running Galaxy S2 GT-I9100 with Nougat 7.1.1, is it possible? Sure, but it is best not to use the latest ROM build. After many tests and comparisons of various Nougat ROMs based on LineageOS I've found out this. The development of the ROM is ongoing very quick, but it's made for many devices. The performance of the CPU is not taken into account. Our S2 is now some years old (since 2011) and has only a CPU with two cores. Standard today is at least a phone with quad core CPU.
Comparing a Nougat 7.1.1 ROM from February 2017 with a current build clearly shows you that the older one runs much faster. This is mainly noticeable when scrolling or if you open apps. In the current ROM there are often lags, it simply needs more performance.
To get the maximum out, a few tweaks with a modded Kernel Adiutor from XDA are necessary, the CPU frequency is set to minimum and maximum 1200 MHz. The battery drain of course is a bit higher - not much, but you have more joy with a smooth running S2.
What do you need for this?
I did made the best experience with AICP 12.1 ROM, build in February 07 2017. you get it here. It runs very stable for daily usage. Only the camera app Snap.apk is buggy at video recordings. You can change this by installing the latest one in my attachment.
The modded XDA Kernel Adiutor is attached too.
The CPU and ondemand governor settings (CPU Governor Tunables) you see on my screenshots. Make sure that the "Apply on boot" toggle is set to on.
Can you tell me where I could find jelly bean compatible CWM recovery ?
trolliumBorate said:
Can you tell me where I could find jelly bean compatible CWM recovery ?
Click to expand...
Click to collapse
Jelly Bean has its own, "built-in" recovery. Unfortunately, I am not aware of whether you can take another recovery for it. I know there is a flashable CWM recovery via Odin for the S2 (I have it here). But this is intended for flashing custom ROMs.
@Nobby1960
Hi, good instruction.
Useful article.
trolliumBorate said:
Can you tell me where I could find jelly bean compatible CWM recovery ?
Click to expand...
Click to collapse
I allways used this file "PhilZ-cwm6-XXLSJ-OXX-4.00b21-signed-JB.zip" and installed it via stock Recovery. (no waranty void message after rebooted system). Copy this file on your SDCard, reboot in Recovery Mode and flash it. Now you can keep runing your device on stock ROM or you can install a custom one with this recovery.
The link to AICP 12.1 ROM is not working; I get 404 Not Found.
Franklin46 said:
The link to AICP 12.1 ROM is not working; I get 404 Not Found.
Click to expand...
Click to collapse
Thank you for information. The ROM is no more available on the AICP server. I did upload it to a one click hoster (upload.net) The link in my first post works now again.
Would you still recommend this rom today ? or would the official lineage 7.1.2 be better than this now ?
trolliumBorate said:
Would you still recommend this rom today ? or would the official lineage 7.1.2 be better than this now ?
Click to expand...
Click to collapse
Compared with the latest AICP 12.1 build from 07/10 it's not necessary to jump back to this older version. The performance from all latest Lineage based ROMs became better. The only thing I use the Kernel Adiutor with the performance settings from my first post. I think you can also use the latest official plain vanilla Lineage 7.1.2.
Hi,
thanx for your instructions. I have tried it!
One problem with the setting where i'm unsure: at the end of the settings, the core2 disabled itself and the minimum frequency was set to 100 automatically. I changed the frequency back to 12.000. Is that OK, or should i leave it at 100 ?
btw. I still have installed stock_kernel_twrp_1120. Is that OK, or do i need another kernel?
Anyway, at this point the CPU tweak has made the perforance a little faster, but it's still much worse than Android 4.12
On 4.12 i was running 5 aktive apps the same time without problems. (Navi, RadarWarning, Mp3, GPSLog, + 1 temporarly app)
On Lineage 14.1 the Mp3 already beginns to stutter and the systems gets very slow when i run only 2 Apps. If i start more apps they beginn to chrash.
So i want to ask, is it possible somehow to get the same (or even better) performance with a custom rom like with the original stock 4.12 ?
Thanks for Info,
Rooster
Hi,
hmm - all settings are correct from the governor like the screenshots in Kernel Adiutor? Both CPU frequencies should set to 1200 MHz. In idle time core 2 stops to save battery, but it must switch up at load to 1200 MHz automatically.
The stock_kernel_twrp_1120 is okay to install this ROM. If you boot in recovery after installation you must see the newer TWRP 3.0.2-1 and you can flash the latest TWRP 3.1.0-0 as an .img file.
The problem with Nougat and most modern apps is, the generally RAM consumption gets higher and higher - that's the biggest bottleneck. So the S2 with only 784 MB comes faster to its limits at multitasking than with the latest stock ROM 4.1.2 Jelly Bean and older, more slim apps. Unfortunately there is no chance to get a higher performance with Nougat. There you feel the age of our good old phone from 2011, it came first with Android 2.3.x Gingerbread
Related
Discussion thread for the Samsung Galaxy Player 3.6 (YP-GS1) running CyanogenMod 11
Also known as: Samsung Galaxy S WiFi 3.6
Development thread: http://forum.xda-developers.com/showthread.php?t=2657738
Hello XDA,
this the official discussion thread for users of the Samsung Galaxy Player 3.6 running CyanogenMod 11.
This thread is for holding the development thread clean.
What belongs here
Questions (& Answers)
Tips
Bug reporting
Discussing and talking
What not belongs here
Posts like: "YEAAAAAAH" or "Pls do tis for me and tis for mee thxk"
Asking for ETAs (Estimated Time of Arrival), like "When does the next update comes out?"
Rules
Don't flame anybody!
Don't spam!
Stay on topic!
Happy asking, answering and posting!
For the best CPU performance set the min. CPU frequency to 600 MHz in Settings/Performance/Proccessor, and activate 'Set on boot'
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
@Androthan is working on CM11 for the 4.2. Compiling just the kernel isn't enough, you'll need a device tree of the 4.2 made for CM11 and build a ROM with that.
Ca110 said:
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
Click to expand...
Click to collapse
Actually bluetooth isn't working, so I can't tell you.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
The kernel source for the 4.2 player, from my github account, are still under constructions and won't work.
And, of course, you don't need to compile it yourself.
I'll start with porting to 4.2 when the build for the 3.6 is a lot more stable.
BTW, the player 4.2 is off-topic here
Quentinga said:
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Click to expand...
Click to collapse
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Androthan said:
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Quentinga said:
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Click to expand...
Click to collapse
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Androthan said:
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Click to expand...
Click to collapse
I speak a lot, but I don't now how it's difficult because It's too hard for me =P
The bootanimation is kinda big for our screen. Maybe we can resize it?
Also, the home button in US version doesn't work.
Android 4.4.3
***Android 4.4.3 is out***
Google released the Android update 4.4.3. This update contains mostly bugfixes and improvements (Read more here: http://liliputing.com/2014/06/whats-new-android-4-4-3-kitkat.html) Don't expect any new features with this update. CyanogenMod is currently merging Android 4.4.3 into CyanogenMod 11, so we have to be patient. As soon as this is done, I'll update my local source code.
Expect Alpha 3 in the next 4 to 5 days.
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
I think CWM 5 is out for stock gingerbread rom one year ago : http://forum.xda-developers.com/showthread.php?t=2198234
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
Sorry but this isn't possible and will end in a soft brick.
Thanks @Quentinga & @Androthan, you saved me from making a stupidity
I keep an eye on this rom and will test soon.
Does music/video playback work on Alpha 2 ? (not able to use the sdcard space and Apollo crash everytime)
Phone feature is enable like in CM 7.2, or it's disable? (It is)
EDIT: (07/06/2014)
1) If the player is plugged in and switch it off, it will restart.
If, however, is not connected, then turns off simply.
2) In alpha2 there isn't the performance menu in option.
Any news with wifi module ? the awesome @zaclimon can't help you ?
I've got an S3 i9300, want to use it as daily driver.
I need an OS that is:
Stable and complete. GPS, Camera, Bluetooth etc.. works
Fast for regular usage (don't want to feel this is old hardware)
has security patches (e.g. stagefright)
preferably has the CM Privacy Manager.
no stock/bloated Samsung ROM
CM12 runs slow. BlissPop (CM12 based) runs slow. MinimalOS (Lollipop) fast but not stable or complete enough, LiquidSmooth old and not updated, AndroidRevolutionHD old etc...
I'm seeing dozens of Roms, I can't try them all.
Which ROMS do you recommend ?
Stock roms run the best. Custom roms are customisable.
I wish I stole my HTC M9.
bracketb4d said:
I've got an S3 i9300, want to use it as daily driver.
I need an OS that is:
Stable and complete. GPS, Camera, Bluetooth etc.. works
Fast for regular usage (don't want to feel this is old hardware)
has security patches (e.g. stagefright)
preferably has the CM Privacy Manager.
no stock/bloated Samsung ROM
CM12 runs slow. BlissPop (CM12 based) runs slow. MinimalOS (Lollipop) fast but not stable or complete enough, LiquidSmooth old and not updated, AndroidRevolutionHD old etc...
I'm seeing dozens of Roms, I can't try them all.
Which ROMS do you recommend ?
Click to expand...
Click to collapse
I myself use i9300 official CM 13 Nightlies but they are kinda buggy for now if you want a totally complete rom so use these:
1. http://forum.xda-developers.com/galaxy-s3/development/rom-cyanogenmod-12-1-i9300-t3254215( use the latest build only for maximum performance )
2. http://forum.xda-developers.com/galaxy-s3/development/rom-aosp-i9300-t3207400 ( use Android 5.1.1 version )
And if you want any rom to run smoothly so you will need :
1. greenify
2. greenify donation pack
3. xposed framework
4. supersu
Use greenify to hibernate almost all system apps unless the ones make you buggy and slow like your launcher and Google now and Google services. And you'd better hibernate the user apps you don't need too. This can make you pretty fast and power saving.
Press the tnx:good: button if I helped you.
JohnSmit268 said:
I myself use i9300 official CM 13 Nightlies but they are kinda buggy for now if you want a totally complete rom so use these:
1. http://forum.xda-developers.com/galaxy-s3/development/rom-cyanogenmod-12-1-i9300-t3254215( use the latest build only for maximum performance )
2. http://forum.xda-developers.com/galaxy-s3/development/rom-aosp-i9300-t3207400 ( use Android 5.1.1 version )
And if you want any rom to run smoothly so you will need :
1. greenify
2. greenify donation pack
3. xposed framework
4. supersu
Use greenify to hibernate almost all system apps unless the ones make you buggy and slow like your launcher and Google now and Google services. And you'd better hibernate the user apps you don't need too. This can make you pretty fast and power saving.
Press the tnx:good: button if I helped you.
Click to expand...
Click to collapse
Wow, thanks for the detailed reply. I never knew Greenify was so important/impactful on overall performance.
I just tested the latest CM11 nightly and noticed it says "android security patch level December 2015". So that's good, it's secure.
One more thing, what are your thoughts on custom Kernels for performance ? I've tried Boeffla and saw a nice difference (with a slightly more performance oriented governor)
bracketb4d said:
Wow, thanks for the detailed reply. I never knew Greenify was so important/impactful on overall performance.
I just tested the latest CM11 nightly and noticed it says "android security patch level December 2015". So that's good, it's secure.
One more thing, what are your thoughts on custom Kernels for performance ? I've tried Boeffla and saw a nice difference (with a slightly more performance oriented governor)
Click to expand...
Click to collapse
It depends on the OS version of your phone and on the build version either for example if you are on the build 20 of cm 12.1 boeffla can make you really fast but if you are on build 30 you have some instabilities coming with it ( as I tried it myself but you can try it too not so sure on this one ) but for the OS versions below 5.1.1 it is really awesome and heavily optimized and bugless.
Hit the tnx:good: button if I helped you.
JohnSmit268 said:
It depends on the OS version of your phone and on the build version either for example if you are on the build 20 of cm 12.1 boeffla can make you really fast but if you are on build 30 you have some instabilities coming with it ( as I tried it myself but you can try it too not so sure on this one ) but for the OS versions below 5.1.1 it is really awesome and heavily optimized and bugless.
Hit the tnx:good: button if I helped you.
Click to expand...
Click to collapse
Thanks, I tested boeffla-kernel-2.12-CM11.0-NG-i9300 with latest CM11 nightly. Phone works great, I think I'll stick with CM11 - I don't really need anything from newer android versions
I vote against greenify and any apps that task manage. Android will keep opening apps regardless of how many times you close them as that is the nature of the operating system. Just let it do what it wants and it'll eventually learn that you don't use that app.
I wish I stole my HTC M9.
shivadow said:
I vote against greenify and any apps that task manage. Android will keep opening apps regardless of how many times you close them as that is the nature of the operating system. Just let it do what it wants and it'll eventually learn that you don't use that app.
I wish I stole my HTC M9.
Click to expand...
Click to collapse
Then you vote for speed decrease and lags and battery drain and so. If you want them to happen on your device so NP then. And knowing that S3's ram is limited and low will make the problem worst. Yeah of course if I had note5 I wouldn't use greenify!!? We only use it to solve the low ram problems that everyone suffer from and you know Android is created to install tweaks and control it as you want if not you can buy an ios device and let it do everything for you.
Hey guys, I am back to bring you the Best smoothest ROM without any lag at all till now. This ROM is Totally made keeping in mind the hardware requirements of this device. We very well know about our Xperia SP is suffering from a very huge issue which makes it unussable at times.
Keeping this issue in mind, i left all latest android versions and took onto and old android version.
We must understand and accept the fact that our phone is not made to operate such heavy new android versions.
And here i present to you guys the "Final Solution ROM CM 10.1"
This ROM include the following features-
Fully odexed system, framework,bootstrap
Odexed Gapps
(Yes I have Included Gapps)
Xposed installer
gravity box JB
material bars xposed module
viper4android
Heavily Debloated
Kernel Auditor
Williams Kernel
Based on FXP 302
Installation guide-
Download the Zip
Go to recovery
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Wipe /system
Install Zip
Reboot
After boot guide-
Go to kernel auditor
Set CPU governor to lagfree
Set IO scheduler to sio
Enjoy!
Guys this is the only ROM that can solve your slow phone issues, if u can manage to use an older android version
You can costumize a lot a with xposed framework to make it look like latest android versions.
Dowload Here-
https://drive.google.com/file/d/0B4I29CuguZClMWx2a3VTT21QNDQ/view?usp=sharing
Thread by @pec0ra -
http://forum.xda-developers.com/showthread.php?t=2764939
Kernel Source-
https://github.com/pec0ra/android_kernel_sony_msm8960t-1/tree/williams
XDA:DevDB Information
Final Solution ROM CM 10.1 Edition, ROM for the Sony Xperia SP
Contributors
Dashing_97, Pec0ra, Free Xperia Team, CyanogenMod
Source Code: https://github.com/pec0ra/android_kernel_sony_msm8960t-1/tree/williams
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-03-21
Created 2016-03-21
Last Updated 2016-03-28
Screenshots-
Dashing_97 said:
R1
Click to expand...
Click to collapse
Please post screenahots. I didnt have cm 10
Sent from my Xperia SP using XDA Forums
Smoothest ever !
Iekuta said:
Smoothest ever !
Click to expand...
Click to collapse
Can you give screens?
Sent from my Xperia SP using XDA Forums
I will post the screenies dont worry
I will try this out later thanks
farnadsh said:
Can you give screens?
Sent from my Xperia SP using XDA Forums
Click to expand...
Click to collapse
Screenshots have been uploaded guys
doomkernel work on this?
could you upload in mediafire or megashare somehow my download stops in the middle with googledrive lol
how come the MHL adapter (Usb to HDMI) doesnt work?
Dashing_97 said:
Hey guys, I am back to bring you the Best smoothest ROM without any lag at all till now. This ROM is Totally made keeping in mind the hardware requirements of this device. We very well know about our Xperia SP is suffering from a very huge issue which makes it unussable at times.
Keeping this issue in mind, i left all latest android versions and took onto and old android version.
We must understand and accept the fact that our phone is not made to operate such heavy new android versions.
Click to expand...
Click to collapse
I agree.
You can also goback to C5303_12.0.A.2.254_CE.ftf with flashtool, it's an original sony rom android 4.1.2 based, totally beautiful and very very lag free.
don't want to be a spoiler ....but such an old system like cm10.1 or our old stock ROMs will not have security patches for stagefright
Dashing_97 said:
Hey guys, I am back to bring you the Best smoothest ROM without any lag at all till now. This ROM is Totally made keeping in mind the hardware requirements of this device. We very well know about our Xperia SP is suffering from a very huge issue which makes it unussable at times.
Keeping this issue in mind, i left all latest android versions and took onto and old android version.
We must understand and accept the fact that our phone is not made to operate such heavy new android versions.
And here i present to you guys the "Final Solution ROM CM 10.1"
This ROM include the following features-
Fully odexed system, framework,bootstrap
Odexed Gapps
(Yes I have Included Gapps)
Xposed installer
gravity box (JB)
material bars xposed module
viper4android
Heavily Debloated
Kernel Auditor
Williams Kernel
Based on FXP 302
Installation guide-
Download the Zip
Go to recovery
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Wipe /system
Install Zip
Reboot
After boot guide-
Go to kernel auditor
Set CPU governor to lagfree
Set IO scheduler to sio
Enjoy!
Guys this is the only ROM that can solve your slow phone issues, if u can manage to use an older android version
You can costumize a lot a with xposed framework to make it look like latest android versions.
Dowload Here-
https://drive.google.com/file/d/0B4I29CuguZClMWx2a3VTT21QNDQ/view?usp=sharing
Thread by @pec0ra -
http://forum.xda-developers.com/showthread.php?t=2764939
Kernel Source-
https://github.com/pec0ra/android_kernel_sony_msm8960t-1/tree/williams
XDA:DevDB Information
Final Solution ROM CM 10.1 Edition, ROM for the Sony Xperia SP
Contributors
Dashing_97, Pec0ra, Free Xperia Team, CyanogenMod
Source Code: https://github.com/pec0ra/android_kernel_sony_msm8960t-1/tree/williams
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-03-21
Created 2016-03-21
Last Updated 2016-03-28
Click to expand...
Click to collapse
flash- said:
don't want to be a spoiler ....but such an old system like cm10.1 or our old stock ROMs will not have security patches for stagefright
Click to expand...
Click to collapse
you can fix major security fix with xposed modules fixes
flash- said:
don't want to be a spoiler ....but such an old system like cm10.1 or our old stock ROMs will not have security patches for stagefright
Click to expand...
Click to collapse
Guys I have tested this rom for many days and it has not shown any lag, that is the main point of it. All other roms out these show some sort of lag.
Testing it for 2 days, everything runs fast and smooth. Installed yahoo aviate launcher, some apps and lolipop nav bar.
The only problem is that there is no 4G/LTE support
JekaDeka said:
Testing it for 2 days, everything runs fast and smooth. Installed yahoo aviate launcher, some apps and lolipop nav bar.
The only problem is that there is no 4G/LTE support
Click to expand...
Click to collapse
YES THERE IS: Dial in the this number: *#*#4636#*#* (This will bring up "Phone info").
Tap WCDMA from under "Set preferred network type".
Select "LTE/GSM/CDMA auto (PRL)".
The 4G LTE network should now be activated.
Wow, ty. Activated LTE as well.
Also, there was a problem with DPS manager when playing music through PowerAPM player. Just a constantly crush error even with killed process. So i managed to delete it.
touch problem
hey dude
thanks for your roms
but i have touch problem very very bad touch in my phone ! do you have any solution for this such as glove mode or high touch sensitivity ?
unidco said:
hey dude
thanks for your roms
but i have touch problem very very bad touch in my phone ! do you have any solution for this such as glove mode or high touch sensitivity ?
Click to expand...
Click to collapse
this should help u out
Time Appropriate Greetings fellas!!!
This is my take on the AOSP 6.0 for Lenovo K3 Note....
AOSP_PURE is ported from Zopo Speed 7 just like it was done during the early lollipop days, with the help of few tutorials available on the internet I managed to port a stable marshmallow rom with few bugs obviously, its a learning process for me and those who wish to test it or modify it are welcome to do it but please credit me and people in my credit section and also please comment in the thread what u have done to correct the bug because in the end all we need is Fully functioning ROM and knowledge of how to do it....
AOSP PURE based on the latest firmware of zopo speed 7 with latest security updates. It is not a modification to zoromax port. This AOSP release has very few modifications so that the user can do whatever you want. Have fun!!!
Known Bugs
LED for stuffs
D2W
3G/4G Connection Issues
SMS Issues
Youtube Issues
Proximity not working during calls
SDCard Corruption
Camera doesnt open
Hardware Capacitive buttons not working (only software touch buttons)Cannot play Video or record sound
Comment if u find more....
this is a stable release except for the usual LED and D2W stuff....rooted, gapps installed, busybox and is MultiLanguage...
This rom comes as two versions ODEXED and DEODEXED
ODEXED ROM means the app have seperate odex files to make them open faster. The odexed rom usually boots quicker but the boot time increases as the number of apps installed increases. In general odexed roms are snappier than deodexed rom but modern smartphones have better processor to make this delay negligible.
DEODEXED ROM means the the odex files are placed in apk instead of being a seperate file, so every time an app is opened it is extracted to load the odex file in memory which takes more time than having odex files outside. But again in current gen processors the delay is negligible. Deodexed rom has long intial boot time but after the first boot no matter how many apps are installed they boot at the same time.
WARNING TEST THIS AT UR OWN RISK....BACKUP EVERYTHING U HAVE BEFORE DOING ANYTHING...
Boot into TWRP recovery
Wipe Dalvik Cache, Cache, System and Data
Flash the file
Reboot....
POST 1 Intro
POST 2 Changelog
ROM Download
AOSP PURE STABLE 1.4 Odexed
AOSP PURE STABLE 1.5 Odexed
ROM Screenshots
Created : 30/06/2016
Last Release : 16/07/2016
State : STABLE
Credits :
Lenovo for phone, Zopo for the rom, Sandeep for the guide, Ninad and Kaka for the suggestions and finally SuperR for SuperR's Kitchen with which the rom is made.
Changelog
Beta 1
Initial release
Beta 2
Fixed Camera, Audio and Video Playback as well as recording, Hardware Capacitive Touch,
Added SnapIT and Lenovo Gallery for few options as Stock Camera has some issues.
This version is odexed for better initial boot time, hence the bigger size.
Stable 1
Fixed proximity and sdcard corruption. Bugs left are led and d2w. Removed Lenovo camera and gallery as it had issues with front camera.
Stable 1.1
Fixed the "settings stopped" when opening security in settings and a few tweaks to improve the UI smoothness.
Stable 1.2
Fixed 3G/4G Connection Issues (thanks to sandeep sethi ). Few tweaks to improve overall responsiveness. Relased the rom as two version odexed and deodexed.
Stable 1.3
Fixed SMS issue which was left over in Stable 1.2 and youtube now supports upto 1080p. Added few additional apps like
FDroid - Open Source App Store
Adaway - To prevent ads by replacing host files
Naptime - For better doze behaviour make use of it. Thanks to Fransisco Franco for developing this app
NewPipe - Open source simple app that can replace youtube and also can download youtube videos.
Naked Browser - The most lightweight web browser
SuperSU is now at 2.76.
Stable 1.4
Updated to latest zopo speed 7 firmware Build Number: 20160708-144458
Apparent fix with slow system response [as mentioned in zopo firmware changelog]
Updated to June Security update [as in firmware]
Removed the addition apps included in st 1.3
Replaced Root Explorer with MiXplorer for ethical reasons
Improved UI Response
NOTE
There is a new app in /system/app called "FineSearch" which opens to the newly added search bar as a part of Quick Settings tile. Seems like zopo added it to promote yahoo which sucks. I leave it to the user to remove it if u want. Don't ask me to remove it from quick setting tile, anyone who know how to do it are welcome to do it coz i hate it too
Stable 1.5
Removed FineSearch Yahoo Ad in quick setting tile
reserved
If you manage to open camera..
Will you provide lenovo snapit... or will it be aosp camera..?
adikri said:
If you manage to open camera..
Will you provide lenovo snapit... or will it be aosp camera..?
Click to expand...
Click to collapse
i prefer snapit but since the idea is to provide a rom close to aosp it only makes sense to zip it with aosp camera
pvkiniyan95 said:
i prefer snapit but since the idea is to provide a rom close to aosp it only makes sense to zip it with aosp camera
Click to expand...
Click to collapse
Hmm.. but change only in camera is not a big deal..
And snapit is far better than aosp...
And good luck with your rom..
During 1st boot it stuck !!!
I flash this rom , during 1st boot it stuck on lenovo logo. You told that keep patience and wait for 10 to 15 mins, I waited for around half an hour. It never boots up bro. Complete waste of data I downloaded and as well as time.
Will this work for k4 note or can u pl port and post a thread?
prosen_ghosh said:
I flash this rom , during 1st boot it stuck on lenovo logo. You told that keep patience and wait for 10 to 15 mins, I waited for around half an hour. It never boots up bro. Complete waste of data I downloaded and as well as time.
Click to expand...
Click to collapse
i tried beta 1 and beta 2 now from the link and mine booted up, i don't know why it doesn't for you....i am uploading a stable release, try that if u want...
I tried stable release 1, the ROM did work well but it did get very hot from just normal use.
I have now gone back to s427
timbook2 said:
I tried stable release 1, the ROM did work well but it did get very hot from just normal use.
I have now gone back to s427
Click to expand...
Click to collapse
i tweaked stable 1 for performance but ended up getting throttled thats why there is stable 1.1....stable 1.2 on its way with few more fixes
stable 1.2 released
stable 1.3 released
Great work buddy ..
thanx,for the rom,i will try it out,,at the moment nexus by dr.root,,,btw,is this having newest modem,,? be zezam
pvkiniyan95 said:
Time Appropriate Greetings fellas!!!
This is my take on the AOSP 6.0 for Lenovo K3 Note....
AOSP_PURE is ported from Zopo Speed 7 just like it was done during the early lollipop days, with the help of few tutorials available on the internet I managed to port a stable marshmallow rom with few bugs obviously, its a learning process for me and those who wish to test it or modify it are welcome to do it but please credit me and people in my credit section and also please comment in the thread what u have done to correct the bug because in the end all we need is Fully functioning ROM and knowledge of how to do it....
AOSP PURE based on the latest firmware of zopo speed 7 with May security updates. It is not a modification to zoromax port. This AOSP release has very few modifications so that the user can do whatever you want. Have fun!!!
Known Bugs
LED for stuffs
D2W
3G/4G Connection Issues
SMS Issues
Youtube Issues
Proximity not working during calls
SDCard Corruption
Camera doesnt open
Hardware Capacitive buttons not working (only software touch buttons)Cannot play Video or record sound
Comment if u find more....
this is a stable release except for the usual LED and D2W stuff....rooted, gapps installed, busybox and is MultiLanguage...
This rom comes as two versions ODEXED and DEODEXED
ODEXED ROM means the app have seperate odex files to make them open faster. The odexed rom usually boots quicker but the boot time increases as the number of apps installed increases. In general odexed roms are snappier than deodexed rom but modern smartphones have better processor to make this delay negligible.
DEODEXED ROM means the the odex files are placed in apk instead of being a seperate file, so every time an app is opened it is extracted to load the odex file in memory which takes more time than having odex files outside. But again in current gen processors the delay is negligible. Deodexed rom has long intial boot time but after the first boot no matter how many apps are installed they boot at the same time.
WARNING TEST THIS AT UR OWN RISK....BACKUP EVERYTHING U HAVE BEFORE DOING ANYTHING...
Boot into TWRP recovery
Wipe Dalvik Cache, Cache, System and Data
Flash the file
Reboot....
POST 1 Intro
POST 2 Changelog
POST 3 Downloads
Note : There was a camera glitch in AOSP PURE Stable 1.2 for which a patch is provided in POST 3. But I have integrated the fix and reuploaded the rom on jul 11 00:21 IST so people downloading the rom after july 11 need not download the patch
ROM Download
AOSP PURE STABLE 1.3 Odexed
ROM Screenshots
Created : 30/06/2016
Last Release : 13/07/2016
State : STABLE
Credits :
Lenovo for phone, Zopo for the rom, Sandeep for the guide, Ninad and Kaka for the suggestions and finally SuperR for SuperR's Kitchen with which the rom is made.
Click to expand...
Click to collapse
hey,man, thanks for your work, i just have a question whether the pre-installed apps you add could be removed.
wetry8 said:
hey,man, thanks for your work, i just have a question whether the pre-installed apps you add could be removed.
Click to expand...
Click to collapse
yes u can remove the pre added ones in stable 1.3...btw don't quote the OP....
pvkiniyan95 said:
yes u can remove the pre added ones in stable 1.3...btw don't quote the OP....
Click to expand...
Click to collapse
of course i wont ,i m just a user, just want to find one rom stable and smooth,and if i removed the pre installed apps in the roms(based on the marshmallow) i experienced before, i couldnt access the system.so i wonder it is the issue of android 6.0 or not.Thanks for your work again.
St 1.4 released
Thanks for providing the first stable AOSP 6.0 experience! I am using 1.3 now for more than a day not as a daily driver. It's stable, however I feel that stock 6.0 is more smooth due to I think better memory management. I am a light user, no games, mostly youtube/chrome/gmail.
Hi everyone, i have been trying lately to improve my xperia x roms and tried a few of them but none seemed to work properly, sometimes random crashing or battery not charging ...
i was hoping you could help me chose a stable rom for everyday use and gaming (mostly emulation).
thank you in advance !!
I only tried "Unofficial LineageOS 16.0 for Xperia X" and "Unofficial AOSP9r46[X-X Dualsim-X Compact]". AOSP has less issues thanks to more modern kernel/drivers & you can use GCam, but of course it lacks all the comfortable things any LineageOS ROM comes with. The LineageOS has a black screen issue which occurs relatively seldom, but still regularly. It happens when you open an app, most often when switching fast between apps like when sharing a file with an app. You then have to kill that app which has gone black, but very seldom you need to reboot since the black screen is so that you even can't see the Android touchscreen buttons anymore to click back/previous app/homescreen.
I you install AOSP make sure to install the version you'll find deep in the thread and the updated boot.img. The folders on my harddrive are named "20200422 build with 4.9.219 kernel update" and "Updated boot.img with 4.9.230 kernel" which contain the files "AOSP-9-F5121-20200422-4.9.219brcmfmac.zip" and "20201003-aosp9-bootimage-4.9.230-f5121.zip" respectively and I noted down the following in a txt-file:
Edit : new boot.img with 4.9.230 kernel should be flashed instead of the one in full ROM archive, should fix some of the intempestive reboots (CPU frequency fix).
Only quickly tested on Kugo. Have the old boot.img at hand in case of problem.
Click to expand...
Click to collapse
TWRP I'm using is TWRP v3.3.1 for Xperia X (twrp-3.3.1-0-suzu.img).
Btw I never had charging issues, so make sure it's not a dirt/dust or hardware issue (worn out battery can also cause stability issues.
LineageOS 16 is the most stable non-stock rom
Spardantex said:
LineageOS 16 is the most stable non-stock rom
Click to expand...
Click to collapse
Hello ! Do you know how to install MicroG on Sony Xperia X suzu with Lineage Os 16 installed ( without Gapps ) ?