I have some scratches on the plastic side up. Light scratches.
Any way to remove the scratches ??? Toothpaste is good ?
Whatever you wanted to ask , make it clear & if you have a tempered glass I don't think there would be any scratches on top , try to prevent cuz only soft scratches can be removed
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Whatever you wanted to ask , make it clear & if you have a tempered glass I don't think there would be any scratches on top , try to prevent cuz only soft scratches can be removed
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Scratches are on back plastic part.
You mean near front cam & mic ? Or plastic edges on back
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:21 PM ---------- Previous post was at 03:00 PM ----------
Delete this thread , don't spam XDA if you donno how to put a question & use Google before asking stupid stuff
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
You mean near front cam & mic ? Or plastic edges on back
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 03:21 PM ---------- Previous post was at 03:00 PM ----------
Delete this thread , don't spam XDA if you donno how to put a question & use Google before asking stupid stuff
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Ffs the phone has plastic only on the back!
I scratched the plastic antenna parts from the back of phone.
The plastic above camera and dual tone led.
Alright bro you can use :
1) Toothpaste that creates paste when mixed with few drops of water
2) Baking Soda (same as above )
Use some case & prevent scratches because as I said only soft scratches can be removed ?
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Alright bro you can use :
1) Toothpaste that creates paste when mixed with few drops of water
2) Baking Soda (same as above )
Use some case & prevent scratches because as I said only soft scratches can be removed
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
The phone dropped when i removed the case to clean it
Just asking can those plastic parts from the back be replaced?
RootNightmareX said:
The phone dropped when i removed the case to clean it
Just asking can those plastic parts from the back be replaced?
Click to expand...
Click to collapse
Oh bro nope just the plastic parts cannot be replaced but you can get the entire panel on the back replaced just get one with good quality & recommend seller on eBay or AliExpress estimated amt 500-800 Rs but better if you have a case which covers top & bottom cover karle eg. Tarkan Armor 300 Rs instead of getting whole panel getting replaced
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 04:25 PM ---------- Previous post was at 04:23 PM ----------
If you're happy with my response hit thanks button & anything else to ask contact , I'll try to reply asap
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Oh bro nope just the plastic parts cannot be replaced but you can get the entire panel on the back replaced just get one with good quality & recommend seller on eBay or AliExpress estimated amt 500-800 Rs but better if you have a case which covers top & bottom cover karle eg. Tarkan Armor 300 Rs instead of getting whole panel getting replaced
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 04:25 PM ---------- Previous post was at 04:23 PM ----------
If you're happy with my response hit thanks button & anything else to ask contact , I'll try to reply asap
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Just wanted to know if this can work for those scratches?
https://olxro-ring08.akamaized.net/...ectoare-pentru-zgarieturi-auto-fotografii.jpg
Yes car scratch remover must work
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Yes car scratch remover must work
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
The one from phot is ok or you have any recommandation?
RootNightmareX said:
The one from phot is ok or you have any recommandation?
Click to expand...
Click to collapse
It must work & idk I never bought any scratch remover till date [emoji28]
Sent from my Redmi Note 3 using Tapatalk
Related
Just dropped my S3 this afternoon. Cracked/broke the top glass edge.
Is there a simple way to:
1. get the unit replaced by Three (no insurance but its only a few months old on contract)
2. Get it repaired by a service centre (how much??)
3. Repair it myself...what do I need?
Many thanks.
Stevemann said:
Just dropped my S3 this afternoon. Cracked/broke the top glass edge.
Is there a simple way to:
1. get the unit replaced by Three (no insurance but its only a few months old on contract)
No its damaged and chargeable .
2. Get it repaired by a service centre (how much??)
3. Repair it myself...what do I need?
2 & 3 a number of posts on here with costs how to etc .
jje
Click to expand...
Click to collapse
to repair my broken glass an indipendent service (not samsung official) asked my for 280€ (new glass and work), this in italy.. i don't know in your place..
Do you think that would have been avoided with a case that covers the end of the phone?
Sent from my SGH-T999 using xda app-developers app
Same happened to mine, had it replaced at a Samsung service centre for £150 all in.
Sent from my GT-I9300 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1904559
Sent from my GT-I9300 using xda app-developers app
I have a case that covers the back casing and edges.
It doesn't cover the front face...
Sent from my GT-I9300 using Tapatalk 2
kobz1973 said:
http://forum.xda-developers.com/showthread.php?t=1904559
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ok. It looks a straightforward procedure. I can get the glass screen off Amazon for £14 so will give it a go...
Brave guy. I cracked mine, however I'm going to sell it. Damaging the digitizer while replacing the glass would be too costly.
I saw on ebay the glass and digitizer for 20 bucks.
http://www.ebay.com/itm/LCD-Touch-S...954?pt=LH_DefaultDomain_0&hash=item4169ade3c2
Sent from my Nexus 7 using xda premium
---------- Post added at 07:42 PM ---------- Previous post was at 07:39 PM ----------
Oh and if you do repair it, try using a good case, like urban armor
I am using it here and i'm pretty happy.
Sent from my Nexus 7 using xda premium
tntgdh said:
I saw on ebay the glass and digitizer for 20 bucks.
http://www.ebay.com/itm/LCD-Touch-S...954?pt=LH_DefaultDomain_0&hash=item4169ade3c2
Sent from my Nexus 7 using xda premium
---------- Post added at 07:42 PM ---------- Previous post was at 07:39 PM ----------
Oh and if you do repair it, try using a good case, like urban armor
I am using it here and i'm pretty happy.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Read the feedback..
"Looks like, the flex cable was already used!"
"Сlearly is not a T720. non-original parts"
"This is a Scam pice plastic"
And the item description:
"The Digitizer together with the Display,do not come with the Front Glass.Pls remember this."
Smart way to cover it indeed.
Maybe a protective case would have saved it, in fact I always have it on (Samsung) original, the only moment that I have taken it off, the phone dropped from about 20cm and the screen cracked.. I have been unlucky because I've hit the cracking point of the glass..
Sent from my GT-I9300 using xda app-developers app
Probably going for an Otterbox as I had this on my ETC. Bomb proof!
Sent from my GT-I9300 using Tapatalk 2
option 3 is only for non noobs , you do know how to seperate digitizer from outer glass right ?
Try to do it yourself if you are comfortable with opening your phone
my gosh! unfortunate.. I'll defend that with otterbox, before mine will be like that
You guys know that the lcd+touchscreen+glass are one unit right? There is no way you can replace them separately.
I work in a mobile repair center I know what I'm talking about.
Sent from my GT-I9300 using xda premium
Robi-K said:
You guys know that the lcd+touchscreen+glass are one unit right? There is no way you can replace them separately.
I work in a mobile repair center I know what I'm talking about.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It is possible and if you took time to read this thread from the beginning and follow the links you will be able to watch I it being done
Sorry if I've angered you but I did read the whole thread. Maybe you are right maybe not.
I'll rephrase then: In my opinion it is not possible to change the display, glass or digitizer separately. It is a single unit as it was with the Galaxy S and Galaxy SII.
Sent from my GT-I9300 using xda premium
---------- Post added at 04:16 AM ---------- Previous post was at 03:50 AM ----------
Ok so the guy has some balls I give you that.
I am in no way trying to pick a fight here. All this is only my opinion.
You will have airgap between the screen and digitizer, second I wonder if the speaker works after al that heat applied. To me it looks highly unprofessional. Again just an opinion.
Remember most people complain about their screen being pentile 1-2 dead pixels and I could go on and on.
This is in my opinion not a good solution. Cheap but not good.
Sent from my GT-I9300 using xda premium
what i did was, order 1 screen+digitizer for 270 US dolars, replace the broken 1.
them i remove the cracked glass from the broken screen and replace it with a new glass
and sell that part for half the price.
Where i can buy back housing?
In your town
Sent from my LT22i using Tapatalk 2
Ebay.com!!
check there !!
Yeah on ebay you can find any accessory for ur device
Try eBay.in and search Xperia u battery door
Sent from my ST25i using xda app-developers app
JyRo said:
Where i can buy back housing?
Click to expand...
Click to collapse
amazon is faster and more reliable!
Hai dere i cut my own back housing from cardboard i found in twn it environmental friendly vry good n reliable hope i help u it take maybe 30 min but vry worth it
Ebay.com -- Amazon.com -- Stellatech.com -- alibaba.com -- parts4repair.com etc
I bought on aliexpress two back door cover, black and white, with bottom cap, now at $7.50
---------- Post added at 10:02 AM ---------- Previous post was at 09:55 AM ----------
AnanasExpress said:
I bought on aliexpress two back door cover, black and white, with bottom cap, now at $7.50
Click to expand...
Click to collapse
It's seems to be original, sony logo is well reproduced
Has anyone tried, or know about the Tridea View Flip Case?
I want to know if it has the integrated S-View functionality like the OEM and others out there. There aren't any reviews for this case anywhere and the window looks quite a bit smaller than the OEM S-View case which makes me think that it won't behave like the S-View case.
Link to the product:
http://www.amazon.com/Tridea-Samsung-Italian-Standing-Display/dp/B00FBK1MKG
Thanks!!
If they had a black one I'd buy it (not sure why they made a black color for the non-s-view). Also it has a smaller s-view window so i'm skeptical if it'll function like the OEM features.
I bought the black one from eBay. Overall, its a decent case but does add bulk. The S-View function doesn't work, I think it's supposed to have a magnet but there isn't one.
I only use it when I'm out with my kids so they can use it in stand mode.
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 11:38 PM ---------- Previous post was at 11:36 PM ----------
Forgot to mention that the plastic screen will get scratched up, mine had a hairline one right out of the box.
The card slot is so tight that I don't want to risk even putting one card in there for fear that it would rip.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hound88 said:
I bought the black one from eBay. Overall, its a decent case but does add bulk. The S-View function doesn't work, I think it's supposed to have a magnet but there isn't one.
I only use it when I'm out with my kids so they can use it in stand mode.
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 11:38 PM ---------- Previous post was at 11:36 PM ----------
Forgot to mention that the plastic screen will get scratched up, mine had a hairline one right out of the box.
The card slot is so tight that I don't want to risk even putting one card in there for fear that it would rip.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for the review!! I've decided to get the Spigen one instead now that's its been released.
Can the housing of the international version housing fit our version, the e970? It seems that the sprint variant and int'l variant parts are waay cheaper than the at&t parts and my back glass is broken and I don't have so much money for the at&t part.
So I'm wondering if I can simply buy an int'l version's housing to replace it with. Can it work?
No it can't. The Att e970 has slightly different dimensions. Cases of the international or sprint version will not fit I tried it. I won't fit. I know it is a shame since they have way more cases and options to choose from.
Sent from my LG-E970 using Tapatalk
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
And also the same for the glass on the back and front. Slightly different dimensions.
Sent from my LG-E970 using Tapatalk
dante501 said:
No it can't. The Att e970 has slightly different dimensions. Cases of the international or sprint version will not fit I tried it. I won't fit. I know it is a shame since they have way more cases and options to choose from.
Sent from my LG-E970 using Tapatalk
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
And also the same for the glass on the back and front. Slightly different dimensions.
Sent from my LG-E970 using Tapatalk
Click to expand...
Click to collapse
do you know where i can find one then...preferably one that is not expensive?
Case or screen?
Sent from my LG-E970 using Tapatalk
dante501 said:
Case or screen?
Sent from my LG-E970 using Tapatalk
Click to expand...
Click to collapse
I already found this cool case for it now i jus need a screen
Well I found quite a few screens.around 50$ upwards. http://m.ebay.com/sch/i.html?kw=lg+...088.m2428.l1311.R4.TR4.TRC1.Xlg+g+e970+screen
What case do u got?
Sent from my LG-E970 using Tapatalk
dante501 said:
Well I found quite a few screens.around 50$ upwards. http://m.ebay.com/sch/i.html?kw=lg+...088.m2428.l1311.R4.TR4.TRC1.Xlg+g+e970+screen
What case do u got?
Sent from my LG-E970 using Tapatalk
Click to expand...
Click to collapse
i got this
http://www.ebay.com/itm/For-AT-T-LG...t=US_Cell_Phone_PDA_Cases&hash=item3a8a94267c :good:
I am looking for a bumper like the one Apple made for the iPhone 4.
No layer on the back, just protect the edges and elevate screen and camera so i can put the phone on the table without scratches on screen or camera.
Should ship to Europe.
Talkrabb said:
I am looking for a bumper like the one Apple made for the iPhone 4.
No layer on the back, just protect the edges and elevate screen and camera so i can put the phone on the table without scratches on screen or camera.
Should ship to Europe.
Click to expand...
Click to collapse
You can try the rhinoshield crashguard. I received mine 2 days ago and i am very satisfied with it.. it has 2 raised lips on the back to keep the phone away from the table. The screen is also not in contact with the table as it has a small lip. However i did not drop test it
I forgot to mention that it should be not made of metal.
Beside rhinoshield crashguard, any alternative?? No metal and just around edge and raise lip to cover screen and camera lens .
Would like to find an alternative to the rhino crash guard
Sent from my SM-G930F using XDA-Developers mobile app
baconman said:
Would like to find an alternative to the rhino crash guard
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Why? 25 bucks to high? Becuase it seems that this is your only option and if you want cheaper then you have to go with them metal one's because those are just a few bucks.
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
i found this one on ebay http://www.ebay.com/itm/Wolnutt-Sof...hash=item33bb43aa04:m:mJuovV9wBmpMCfw7BG-5mgQ
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
Talkrabb said:
I forgot to mention that it should be not made of metal.
Click to expand...
Click to collapse
try this one http://www.ebay.com/itm/Wolnutt-Sof...hash=item33bb43aa04:m:mJuovV9wBmpMCfw7BG-5mgQ
RiTCHiE007 said:
Why? 25 bucks to high? Becuase it seems that this is your only option and if you want cheaper then you have to go with them metal one's because those are just a few bucks.
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
i found this one on ebay http://www.ebay.com/itm/Wolnutt-Sof...hash=item33bb43aa04:m:mJuovV9wBmpMCfw7BG-5mgQ
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
try this one http://www.ebay.com/itm/Wolnutt-Sof...hash=item33bb43aa04:m:mJuovV9wBmpMCfw7BG-5mgQ
Click to expand...
Click to collapse
No, I have this case already, but I think that the buttons doesn't feel so good and it's too big, I'll try to order what you gave me a link too, thanks.
Sent from my SM-G930F using Tapatalk