ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip (includes patches fixing issues with EDL, FASTBOOT and ROOT)
CRC32: 797405C0
MD5: 3AFD84C314960DE0DFFAAB950A435745
SHA-1: F4C358F8CD5E043FE897E7D51FE93780C395CE42 https://4pda.ru/pages/go/?u=https%3A%2F%2Fmega.nz%2F%23!FtI3iSSa!4guZpoM2oCmgoxTiBBFA_Rt1wY1cdZTbA7WcugkLSic&e=60952279
ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip https://4pda.ru/pages/go/?u=https%3A%2F%2Fmega.nz%2F%23!Jp5mna5a!sS9Ns_WlvqeKRcXGjrDST43PQ09Zgb_hgIqN-5heIWg&e=60952279
CRC32: F6CD7F71
MD5: C1A3719F641ED63EE5D53E968DE6D798
SHA-1: E6E0E175663B78AC238BD1D9C620DF0FCF27E267
Instructions:
1. Go to TWRP
2. Advanced wipe - Dalvik,System,Data,Cache
3. Installing this file first : BootStack ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip
4. This one second : StockSystem ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip
5. Flashing this one as well: no-verity-opt-encrypt-5.1.zip
6. wipe cache/dalvik
7. In TWRP input this command: reboot disemmcwp
8. Boot into the system
9. Check if its possible to enter edl mode (fix is already included in bootstack) Volume down + power button
10. Check you you are able to get to FASTBOOT via the combination of buttons Volumeup+Powerbutton
11. Install GApps ZTE Axon 7
Installing SuperSU:
1. Go back to recovery TWRP
2. Flash SuperSU 2.79
3. Wipe cache/dalvik
4. In the Terminal of TWRP input this command: reboot disemmcwp
5. Boot to the system and see if SuperSU is working.
Disclaimer (READ!) :
This is being updated by the amazing djkuz which is active in 4pda and sometimes here as well.
it seems that 4pda is more active then xda for apperant reasons , axon is more popular in russia.
All of this is not on my responsibility if you **** your device, your problem ( Ive just merely copied the guide from a russian forum 4pda).
Ive done this myself but I can't make root stick. (will be happy for an advice and some brainstorming on this one)
@djkuz
Can you please assist -
The root doesn't stick I follow step by step, when I enter the supersu app it says there is no root.
booth files 2.7GB? bootstak shood me smaller
yosef019 said:
booth files 2.7GB? bootstak shood me smaller
Click to expand...
Click to collapse
Fixed
parazite69 said:
@djkuz
Can you please assist -
The root doesn't stick I follow step by step, when I enter the supersu app it says there is no root.
Click to expand...
Click to collapse
Very strange, what version of SuperSu was used? 2.79 stable only works correctly.
djkuz said:
Very strange, what version of SuperSu was used? 2.79 stable only works correctly.
Click to expand...
Click to collapse
Yes, just as the one I have posted here. Followed exactly as it says in your guide.
Hi guys. Been following the thread in 4pda too. Could you please post a mirror for te edl_fix.zip here? I can't download it in 4pda as i can't create an account there. Thanks so much.
parazite69 said:
Yes, just as the one, I have posted here. Followed exactly as it says in your guide.
Click to expand...
Click to collapse
Try this:
1. Go back to recovery TWRP
2. Flash patching boot (in boot partition) https://mega.nz/#!dhwCHLqI!3lmYs2wV6DGYwqteU_h98ffZbeJp9lVXCyQzz-wQG3A (not need to flash no-verity-opt-encrypt-5.1.zip)
2. Flash SuperSU 2.79 https://mega.nz/#!J8BggKDS!OYSLIQ4vSntRGO8lBWnp8frBymtfC_oo57bzIGubf2A
3. Wipe cache/dalvik
4. In the Terminal of TWRP input this command: reboot disemmcwp !!!!!!!!!!!!
---------- Post added at 11:14 PM ---------- Previous post was at 11:11 PM ----------
otaconremo said:
Hi guys. Been following the thread in 4pda too. Could you please post a mirror for te edl_fix.zip here? I can't download it in 4pda as i can't create an account there. Thanks so much.
Click to expand...
Click to collapse
https://mega.nz/#!VhJDjAQZ!CDbx4YW_LIVQedY_7RixQk-7J6Q0T--W8lYhIVSP0-Q
djkuz said:
Try this:
1. Go back to recovery TWRP
2. Flash patching boot (in boot partition) https://mega.nz/#!dhwCHLqI!3lmYs2wV6DGYwqteU_h98ffZbeJp9lVXCyQzz-wQG3A (not need to flash no-verity-opt-encrypt-5.1.zip)
2. Flash SuperSU 2.79 https://mega.nz/#!J8BggKDS!OYSLIQ4vSntRGO8lBWnp8frBymtfC_oo57bzIGubf2A
3. Wipe cache/dalvik
4. In the Terminal of TWRP input this command: reboot disemmcwp !!!!!!!!!!!!
---------- Post added at 11:14 PM ---------- Previous post was at 11:11 PM ----------
https://mega.nz/#!VhJDjAQZ!CDbx4YW_LIVQedY_7RixQk-7J6Q0T--W8lYhIVSP0-Q
Click to expand...
Click to collapse
Amazing worked like charm!!! Thank you.
If you may share a bit on what was wrong ?
update :
It still says its not rooted
Thank you so much @djkuz.
@djkuz
I have moved straight from Zad 0.3mix with Chinese
Bootstack to your guide followed exactly and then implemented the fix you suggested here .
Still the SuperSU says its unrooted, but it constantly grants permission to titanium backup... But still TB doesn't work.
Thank you for assisting on this.
parazite69 said:
@djkuz
I have moved straight from Zad 0.3mix with Chinese
Bootstack to your guide followed exactly and then implemented the fix you suggested here .
Still the SuperSU says its unrooted, but it constantly grants permission to titanium backup... But still TB doesn't work.
Thank you for assisting on this.
Click to expand...
Click to collapse
Have you tried issuing command "reboot disemmcwp" in twrp after installing supersu?
otaconremo said:
Have you tried issuing command "reboot disemmcwp" in twrp after installing supersu?
Click to expand...
Click to collapse
Yes :crying:
parazite69 said:
@djkuz
I have moved straight from Zad 0.3mix with Chinese
Bootstack to your guide followed exactly and then implemented the fix you suggested here .
Still the SuperSU says its unrooted, but it constantly grants permission to titanium backup... But still TB doesn't work.
Thank you for assisting on this.
Click to expand...
Click to collapse
Yes, this problem occurs on some phones...
Did you flash ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip ???
Try in TWRP:
1. Tap Mount and Check "Mount, System as Read-only"
2. Tap WIPE > ADVANCE WIPE > Select Data > Repair or Change File System and Select ext4 (All data will be deleted)
2. Tap WIPE > ADVANCE WIPE > Select Dalvik,System,Data,Cache and Swipe
3. Flash BootStack ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip
4. Flash StockSystem ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip
5. Flash no-verity-opt-encrypt-5.1.zip
6. Flash SuperSU 2.79
7. wipe cache/dalvik
8. Tap ADVANCED > TERMINAL > input this command: reboot disemmcwp
djkuz said:
Yes, this problem occurs on some phones...
Did you flash ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip ???
Try in TWRP:
1. Tap Mount and Check "Mount, System as Read-only"
2. Tap WIPE > ADVANCE WIPE > Select Data > Repair or Change File System and Select ext4 (All data will be deleted)
2. Tap WIPE > ADVANCE WIPE > Select Dalvik,System,Data,Cache and Swipe
3. Flash BootStack ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip
4. Flash StockSystem ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip
5. Flash no-verity-opt-encrypt-5.1.zip
6. Flash SuperSU 2.79
7. wipe cache/dalvik
8. Tap ADVANCED > TERMINAL > input this command: reboot disemmcwp
Click to expand...
Click to collapse
Yes Ive flashed ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip .
I will try it later today and update on the outcome.
Appreciate the help.
parazite69 said:
Yes Ive flashed ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip .
I will try it later today and update on the outcome.
Appreciate the help.
Click to expand...
Click to collapse
And do not forget to go into the Mi-Aassistant and allow autorun SuperSU
hey is it possble return to the B13 6.0 china phone install TWRP and then install this
my pc cant recodnize the phone in EDL mode (with drivers installed)
yosef019 said:
hey is it possble return to the B13 6.0 china phone install TWRP and then install this
my pc cant recodnize the phone in EDL mode (with drivers installed)
Click to expand...
Click to collapse
Yes, it is possible, but the lack of the ability to flash through the EDL is very dangerous !!!
Try:
1. Install the driver from the phone, selecting in settings - connection to the PC - installing the drivers!
2. Boot into the EDL through the command - adb reboot edl
3. Try using another version of MyFlash (for example Beta) and use another USB port on your computer.
And if Windows determines phone as Qualcomm HS-USB QDLoader 9008, but Miflash can not see it - reboot the phone in EDL again!
Don't forget to change the speed of the com port (Qualcomm HS-USB QDLoader 9008) to 115200 (instead of 9600)
djkuz said:
And do not forget to go into the Mi-Aassistant and allow autorun SuperSU
Click to expand...
Click to collapse
Worked!
Thankyou
Related
Hi,
i had B00 with root and chinese recovery
after updating to b121 i goot bootloop
than i changed recovery back to stock
tried to delete cache and system etc. nothing worked
B100 Upgrade via dload/update.app not working cause version mismatch i think
what can i do now. I don't need 349 euro trash.
please help me
Same problem here
Try updating with the full B121 ROM. I have uploaded it here https://mega.nz/#!dgZwAQpb!XcZSZJOWvG1DIDoJRr_EYSehtqTU1ciPE53bNhII8JQ
Follow the instructions in the included documents.
flibblesan said:
Try updating with the full B121 ROM. I have uploaded it here https://mega.nz/#!dgZwAQpb!XcZSZJOWvG1DIDoJRr_EYSehtqTU1ciPE53bNhII8JQ
Follow the instructions in the included documents.
Click to expand...
Click to collapse
Thanks mate, I'll give it a try.
pappapishu said:
Thanks mate, I'll give it a try.
Click to expand...
Click to collapse
any chance?
Fixed it with honor 6 multi-tool, huwaeiupdateextractor and fw b100.
Now i'm installing the b121 right away.
@evilmumi: hope you fixed it as well.
---------- Post added at 04:26 PM ---------- Previous post was at 04:24 PM ----------
evilmumi said:
any chance?
Click to expand...
Click to collapse
sorry, i didn't see your previous post.
yes, i figured out:
- downlaod the fw b100 version
- download honor 6 multi-tool (yes, even if it's made for the 6, it worked for 7 as well) and follow the "unbrick" procedure
if you have any question please ask
flibblesan said:
Try updating with the full B121 ROM. I have uploaded it here ...
Follow the instructions in the included documents.
Click to expand...
Click to collapse
thanks
you are my hero.
back in business
i hope i can use titanium backup to restore my old data w/o root
i am in trouble! i have erased all (cache dalvick data and system) by twrp! Now obviously the phone is on bootloop...i need desperately a system rom to flash
flibblesan said:
Try updating with the full B121 ROM. I have uploaded it here https://mega.nz/#!dgZwAQpb!XcZSZJOWvG1DIDoJRr_EYSehtqTU1ciPE53bNhII8JQ
Follow the instructions in the included documents.
Click to expand...
Click to collapse
Alphasampei said:
i am in trouble! i have erased all (cache dalvick data and system) by twrp! Now obviously the phone is on bootloop...i need desperately a system rom to flash
Click to expand...
Click to collapse
just read the thread
short:
0.)download from mega
1.) copy update.app on micro sd card /dload
2.)boot with volume up down and power than you can work!
evilmumi said:
just read the thread
short:
0.)download from mega
1.) copy update.app on micro sd card /dload
2.)boot with volume up down and power than you can work!
Click to expand...
Click to collapse
nope! still boot in twrp, i have no system inside the phone
sometimes we have this problem in our german forum too! More on rooted devices!
reflashing the full B100 or B121 rom help
we do it like your user described it here:http://forum.xda-developers.com/showpost.php?p=63070827&postcount=9
BTW: Where we can find the "updateextractor"? All versions of it that i have found, doesn’t work for H7 Roms!:crying:
Back to System boot
evilmumi said:
Hi,
i had B00 with root and chinese recovery
after updating to b121 i goot bootloop
than i changed recovery back to stock
tried to delete cache and system etc. nothing worked
B100 Upgrade via dload/update.app not working cause version mismatch i think
what can i do now. I don't need 349 euro trash.
please help me
Click to expand...
Click to collapse
When the phone is in RecoveryMode try a long press vol-up/vol-down/special-key and power all together for a few seconds until the phone reboots ... after that, the phone will start in SystemMode ... for me it worked.
stalfst said:
When the phone is in RecoveryMode try a long press vol-up/vol-down/special-key and power all together for a few seconds until the phone reboots ... after that, the phone will start in SystemMode ... for me it worked.
Click to expand...
Click to collapse
I realized that when I plugged the charger to phone and then powered it, it went off the TWRP boot loop. I fdon't know if any others have same issue.
When I updated my phone I had same kind of problem so I flashed stock recovery and then made the force upgrade following the rom's intructions.
Now eveything works again.
Alphasampei said:
nope! still boot in twrp, i have no system inside the phone
Click to expand...
Click to collapse
Twrp has a bootloop bug.. I also got this after rooting. What you need to do is to get it out of the bootloop by getting the phone in fastboot/download mode. I have no clue on how I finally got it to boot in fastboot mode, but I tried and tried until it finally booted in fastboot. Then I flashed stock recovery and everything was good after that. Lesson learned was that twrp and especially Chinese twrp is buggy as hell!
kjettern said:
Twrp has a bootloop bug.. I also got this after rooting. What you need to do is to get it out of the bootloop by getting the phone in fastboot/download mode. I have no clue on how I finally got it to boot in fastboot mode, but I tried and tried until it finally booted in fastboot. Then I flashed stock recovery and everything was good after that. Lesson learned was that twrp and especially Chinese twrp is buggy as hell!
Click to expand...
Click to collapse
I had no problems at all, no bootloops or any other weird stuff. Perhaps because I wiped cache + dalvik after supersu installation?
have the same problem, what should i do?
sugarray21 said:
have the same problem, what should i do?
Click to expand...
Click to collapse
Read instruction HERE
Fix Bootloops
Breaking out of bootloops depends on your device state and what kind of problem you are having. In this section, we are going to focus on the popular case where you can’t access neither the system nor the recovery partitions.
• Step 1: Turn off the phone.
• Step 2: Press Volume UP + Power Button For 10 seconds while connecting the USB cable from your device to your computer. That must make you boot into the bootloader mode.
(Update: A user has reported that holding the power button is optional on some models. Thanks to @sminki for pointing that out).
• Step 3: Head to your computer and download and install the following tool:
http://forum.xda-developers.com/show....php?t=2433454
• Step 4: Download the latest complete update file (B121) from:
http://www.modaco.com/forums/topic/3...s-121115-b140/
Then, extract it and get its UPDATE.app file.
• Step 5: Use the Huawei Update Extractor to extract the (BOOT.img), (SYSTEM.img), (RECOVERY.img), (CACHE.img), (CUST.img), and (USERDATA.img) from the UPDATE.app file that you have extracted from Step 4.
• Step 6: Open your command prompt, and navigate to the right directory where you have extracted the image files. Use the “cd” and “..” commands to do so.
• Step 7: Type the following commands and execute them one by one >
Code:
fastboot flash boot BOOT.img
fastboot flash system SYSTEM.img
fastboot flash recovery RECOVERY.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
• Step 8: You can also erase the user data if you like by typing and executing the following >
Code:
fastboot flash userdata USERDATA.img
• Step 9: Reboot your device using the following command >
Code:
fastboot reboot
• Step 10: You must be able to boot successfully into the system.
(Noten this model, the "fastboot erase [Partition]" command has been reported by two users that it is not working. Thus, flash the image files directly and if it did not work, then check with the Huawei support center to fix your device. Thanks to @sminki for reporting this).
http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
TWRP Terminal Emulator command method.
I followed the steps here, http://androidforums.com/threads/twrp-bootloop-fix-after-update-ota.922585/ Thanks to the Author... hash_brown.1855790
Which is actually for LG, but slightly altering for Honor7 it works!!
for Honor 7 the commands to be run from TWRP Terminal command emulator will be
dd if=/dev/zero of=/dev/block/platform/hi_mci.0/by-name/fota
Click to expand...
Click to collapse
Hit GO/enter(return)...wait, takes a few seconds
Now input this
dd if=/dev/zero of=/dev/block/platform/hi_mci.0/by-name/misc
Click to expand...
Click to collapse
Hit enter (return)...wait again.
When its complete, reboot.
:good:
Alphasampei said:
nope! still boot in twrp, i have no system inside the phone
Click to expand...
Click to collapse
I had the same problem with twrp i can walking through how to unbrick your phone happy to help
This is for Marshmallow B13. However, I can confirm that installing twrp using tenfars tool still works even on latest B17 nougat or B08 mifavor 5.
However, some users don't have luck with it.
I advise to check first on Axon Toolkit located here:
https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
I made this guide for users who haven't unlocked and rooted their A2017 B13 chinese version.
After reading so many guides here from @tenfar, @DrakenFX, and many others, I finally unlocked bootloader, rooted, installed TWRP and Xposed.
I take no responsibility if anything happens to your phone while doing this process. Just follow every step stated here and hope you don't mess around. Please READ all the instructions here first before doing anything.
Backup all your important data before you do any steps below. This process will delete all contents of your phone except external sdcard.
Step 1: Download the zip file and extract all files to your local disk in one folder.
TWRP recovery 3.1.0-0
axon7root.zip
TWRP_UnlockBootloaderPackage_by_DrakenFX.zip do not extract this file.
Step 2: Enable USB debugging and OEM unlocking under Developer options. to show Developer options, go to Settings, About phone, tap Build Number 7x.
Step 3: Open Windows Explorer and browse to the folder where you extracted the files downloaded above. Press and hold SHIFT key then right click and choose Open Command Window here. type:
Code:
adb reboot edl
This will reboot the phone in edl mode where it's just black screen.
Step 4: Install the Qualcomm's driver .
Download Qualcomm driver to your local disk ,extract and install it
Qualcomm 9008 driver : http://d-h.st/35tx
in the install process choose WWAN, the first option.
Alternative: you could just also install the native drivers provided by the phone. If you have done step 2 already, just long press Power button for about 10seconds to reboot to its system. Once booted, connect your phone to your pc via usb and swipe down from the notification. Choose "install drivers" from the connect options. Open your Windows Explorer and find the new drive containing the driver. After installing, repeat step 3.
Step 5 : open your PC's device manager and find out the com port number which your phone is from COM ports & LPT tree.
Code:
Usage Example: axon7root.exe -p COM4 -b -r
Options:
-p Port number eg: COM8 or 8
-b write boot.img only
-r write recovery.img only
-d dump boot.img and recovery.img from phone(not impl yet)
Step 6: in the command window from step 3, type:
Code:
axon7backup.exe -p COM# -d
replace # with the number of your COM PORT.
This will save the backup files for you stock boot and recovery image.
Step 7: to install TWRP, type:
Code:
axon7root.exe -p COM# -r
Step 8: reboot to TWRP by holding POWER + UP buttons.
Optional:
Step 8a: Copy twrp-3.1.0-0-ailsa_ii.img to your sdcard/extsd. Update to latest TWRP. Install -> IMG (lower right button) -> choose twrp-3.1.0-0-ailsa_ii.img. (Don't reboot to system yet)
Step 8b: From the TWRP, find Reboot to recovery. verify that you have version 3.1.0-0 already.
Step 9: Copy TWRP_UnlockBootloaderPackage_by_DrakenFX.zip to your sdcard/extsd.
Step 10: Back-up and pull current fastboot image. Type:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/fbop of=/sdcard/fbop_lock.img
adb pull /sdcard/fbop_lock.img
Step 11: Flash/Install TWRP_UnlockBootloaderPackage_by_DrakenFX.zip. (do not reboot yet)
Step 12: Type:
Code:
adb reboot bootloader
Step 13: Now let's Unlock the Bootloader. (THIS WILL WIPE DATA+INTERNAL STORAGE)
Type:
Code:
fastboot oem unlock
Confirm yes from your phone.
Step 14: You'll boot in TWRP. once there do the following:
Code:
* tap CANCEL
* tap WIPE
* tap FORMAT DATA and Follow the Instructions
Step 15: Once done, REBOOT system. Follow the setup wizard to gain access to your phone. enable USB debugging again.
Optional: To install root, Boot to recovery again and install/flash SUPERSU 2.79. download at UPDATE-SuperSU-v2.79-20161211114519.zip and copy to your sdcard.
To install Xposed (for MM only), flash xposed-v87-sdk23-arm64.zip and install the apk XposedInstaller_3.1.1.apk.
Do not REBOOT after installation of Supersu and Xposed. Instead, go to Terminal and type:
Code:
reboot disemmcwp
Credits to all the great minds here in xda for doing all their best.
UPDATE: TWRP flashable zips available. Credits to @parazite69 and the russians for these.
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE3Lyb!vQuJlu6apdIrqdBqqgxEHsiKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJyGCiC!0CkXk0yj17HK-JTkvkM5JuKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
I would like this as well.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
BlazingBullets said:
I would like this as well.
Click to expand...
Click to collapse
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
otaconremo said:
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
Click to expand...
Click to collapse
doesn't work if you are unlocked or not using the stock recovery
BlazingBullets said:
doesn't work if you are unlocked or not using the stock recovery
Click to expand...
Click to collapse
I can confirm it's not working, root, unlocked and TWRP.
If somebody can compile B13 for TWRP will really help us.
Thanks!
You're right. You'll need stock recovery to do a full update though. I haven't backed up my B11 stock recovery but I do have the B13 stock boot and recovery. Message me if you want those files.
Sadly no one else wants to make a twrp update for B13. And I don't know how. I already asked from draken a couple of months ago but i think he has never got a time for it.
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
thanhtri87 said:
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
Click to expand...
Click to collapse
try pressing just the power and Up buttons until it reboots and release when you see the ZTE logo. that should enter you into recovery.
yvgamer94 said:
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Click to expand...
Click to collapse
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
HTC55555 said:
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
Click to expand...
Click to collapse
have you tried your method without the terminal command? personally, I don't know if that works without the command but I just used it since it won't harm anyway.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
otaconremo said:
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
Click to expand...
Click to collapse
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
yvgamer94 said:
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
Click to expand...
Click to collapse
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
otaconremo said:
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
Click to expand...
Click to collapse
Sure go ahead.
otaconremo said:
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
Click to expand...
Click to collapse
It's probably just my pc or browser. It's ok though since I managed bootloader unlock and flash twrp with this guide instead:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514/
Thanks for your help though
I have one (stupid) question for which I can't find answer: I stuck at step 2 when I need to enable OEM unlocking. Problem is that some PIN is required but I don't know it and don't know where to find it? Many thanks!
Hi guys,
for those on system/bootstack by tron1, this is what i did to flash B02 with root and fastboot working.
Thnx to @wineds , @tron1
In detail this is what i did ( because i couldn't update the .zip from sd nor update through adb sideload after i installed stock recovery 711 - @wineds could flash the .zip over SD though - thats up to you to choose)
1. I redownloaded fota B02 (to be sure ) from : http://dl1.ztems.com/zxmdmp/downloa...ages/HK/ZTE/ZTE A2017G/401379/fota_B02_B04.up
2. I didn't change .up to .zip. Put it in ADB folder (you know how...)
3. reinstalled Bootstack B01 tron1 via TWRP ( i reuploaded it here because some users had zip problems : https://www.androidfilehost.com/?fid=457095661767157153 )
4. reinstalled System B01 tron1 via TWRP ( i reuploaded and checked it again because some users had zip problems : https://www.androidfilehost.com/?fid=529152257862722738 )
5. installed stock recovery from factory img 7.11 , I uploaded it here https://www.androidfilehost.com/?fid=745425885120725539
6. in TWRP reboot to recovery----> you will reboot in stock recovery
7. update from ADB sideload ( adb sideload yourupdateB02file.up)
8. let it update...will take +-5 min in my case, in my case it was hanging a while on 47% (i thought it froze and tapped on power once, it continued...perhaps you don't have to and wait )
9. reboot system----> you'll have B02
10. use adb again, use ADB REBOOT EDL (https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379), use command ' axon7tool -w recovery' just to reflash TWRP 3.0.2.2 (if needed : https://www.androidfilehost.com/?fid=529152257862720446) . It will reboot system ok. Reenter TWRP 3.022 again and stay there.
11 to get fastboot again, use same thread as above under B ( leave TWRP running), in ADB you'll see you're in recovery mode, that's ok.
12. refollow steps 6 to 14. Reboot to fastboot will be ok again !
13 now in ADB type : fastboot flash recovery 'yourlatestrecovery 3.1'.img (if needed : https://www.androidfilehost.com/?fid=529152257862720448)
14. fastboot reboot
14. your system will reboot without the anoying " blah blah blah unlocked"
15 reenter TWRP 3.1 again and flash SU2.79 again
16 done
17 pls comment/feedback if you succeeded as well
@raystef66
Your links in steps 1 and 10 are invalid due to copy/paste ellipsis (...).
dnlilas said:
@raystef66
Your links in steps 1 and 10 are invalid due to copy/paste ellipsis (...).
Click to expand...
Click to collapse
Some of them were...weird, i never had this problem reffering to other threads..
Did update links. Check them out to verify pls.
Thnx !
I tried your method, everything is fine until I sideload b02 because I get a message when the current system is being verified "E3005: EMMC:/dev/block/bootdevice/by-name/boot: (here are some numbers) has unexpected content" Error in sideload Status 8
And I cannot update to B02, even though currently I am on b01 by tron1 .
S0wL said:
I tried your method, everything is fine until I sideload b02 because I get a message when the current system is being verified "E3005: EMMC:/dev/block/bootdevice/by-name/boot: (here are some numbers) has unexpected content" Error in sideload Status 8
And I cannot update to B02, even though currently I am on b01 by tron1 .
Click to expand...
Click to collapse
Have you tried in stock recovery to update with sd instead of sideload with adb? You also could try changing . UP to . ZIP
raystef66 said:
Have you tried in stock recovery to update with sd instead of sideload with adb? You also could try changing . UP to . ZIP
Click to expand...
Click to collapse
I tried with stock recovery with sideload and with sd as well. with .up and .zip too and I get the same error .
@raystef66 thanks for ur guide
I need to update to b02 but I don't have courage to lose root
Anyone please report after success
Sent from my ZTE A2017G using XDA-Developers Legacy app
tuiyaan said:
@raystef66 thanks for ur guide
I need to update to b02 but I don't have courage to lose root
Anyone please report after success
Sent from my ZTE A2017G using XDA-Developers Legacy app
Click to expand...
Click to collapse
this method has been tried originally by @wineds - he only updated via SD, that's all and changed .up into .zip
In fact you have nothing to fear because when f.e. you're in stock recovery and things won't update as expected, you always can go back in ADB and flash recovery again with axon7tool (EDL) etc...there's always a way out. And have root back....
When your update succeeds after all, you WILL obtain root again as i discribed. Just follow the steps carefully.
I managed to do this in 1 take
S0wL said:
I tried your method, everything is fine until I sideload b02 because I get a message when the current system is being verified "E3005: EMMC:/dev/block/bootdevice/by-name/boot: (here are some numbers) has unexpected content" Error in sideload Status 8
And I cannot update to B02, even though currently I am on b01 by tron1 .
Click to expand...
Click to collapse
Yes rename FOTA as a .zip file and try update from SD card in stock recovery. The fIle needs to be on your external SD. However the error seems to indicate one of your partitions has been modified.
Isn't it easier to
-update to B02
-axon7tool -w recovery
-disconnect before the Success, rebooting countdown ends
-boot TWRP??
Someone made a flashable fastboot zip. haven't tested yet but I guess it will get us fastboot easier
Choose an username... said:
Isn't it easier to
-update to B02
-axon7tool -w recovery
-disconnect before the Success, rebooting countdown ends
-boot TWRP??
Someone made a flashable fastboot zip. haven't tested yet but I guess it will get us fastboot easier
Click to expand...
Click to collapse
Nope, did that too and was a no go. That would have been one of the options to do (i made a thread for this too) but in this case fastboot didn't want to boot with that method strange enough. But you could try and see for your self.
For me this method worked great and i stay 100% stock despite other flashable b02's which are customized.
raystef66 said:
Nope, did that too and was a no go. That would have been one of the options to do (i made a thread for this too) but in this case fastboot didn't want to boot with that method strange enough. But you could try and see for your self.
For me this method worked great and i stay 100% stock despite other flashable b02's which are customized.
Click to expand...
Click to collapse
Yeah, fastboot doesn't want to boot because it isn't there... I mean get to EDL then flash TWRP from there with axon7tool.
I used this method on my guide and it's been working flawlessly
Choose an username... said:
Yeah, fastboot doesn't want to boot because it isn't there... I mean get to EDL then flash TWRP from there with axon7tool.
I used this method on my guide and it's been working flawlessly
Click to expand...
Click to collapse
To get fastboot back you have to downgrade aboot to b01 version :
https://forum.xda-developers.com/showpost.php?p=71847111&postcount=39
wineds said:
To get fastboot back you have to downgrade aboot to b01 version :
https://forum.xda-developers.com/showpost.php?p=71847111&postcount=39
Click to expand...
Click to collapse
Yeah, and you can flash that once you get TWRP
I'm going to update that guide, but the XDA app doesn't let me edit, and I'm far away from a computer. I'll write the process and see if I can try to get fastboot with that zip storming did. For now the process i have in mind is:
Get axon7tool, adb reboot edl, install Zadig qusb_bulk drivers, reload edl with 3 buttons, axon7tool -w recovery (after a backup ofc), disconnect before the tool restarts the phone (you get stock recovery), flash that zip.
Choose an username... said:
Yeah, and you can flash that once you get TWRP
I'm going to update that guide, but the XDA app doesn't let me edit, and I'm far away from a computer. I'll write the process and see if I can try to get fastboot with that zip storming did. For now the process i have in mind is:
Get axon7tool, adb reboot edl, install Zadig qusb_bulk drivers, reload edl with 3 buttons, axon7tool -w recovery (after a backup ofc), disconnect before the tool restarts the phone (you get stock recovery), flash that zip.
Click to expand...
Click to collapse
Or use my method
Works too you know :laugh:
Never mind how you do it every method is ok.
I kept it to the basics every one should know by now. In fact performing the steps to get fastboot again lasts no more then a minute. Just copy paste...
Btw, don't brick your phone again! :cyclops: as i remember you came from the other side of the moon...
raystef66 said:
Or use my method
Works too you know :laugh:
Never mind how you do it every method is ok.
I kept it to the basics every one should know by now. In fact performing the steps to get fastboot again lasts no more then a minute. Just copy paste...
Btw, don't brick your phone again! :cyclops: as i remember you came from the other side of the moon...
Click to expand...
Click to collapse
Lol I wiped system and data and was holding the power button... Can't believe I was that silly.
My guide actually turned out pretty huge too. So whatever man
Choose an username... said:
Lol I wiped system and data and was holding the power button... Can't believe I was that silly.
My guide actually turned out pretty huge too. So whatever man
Click to expand...
Click to collapse
Cheers mate and...happy flashing! :good:
Hi, when I try to flash stocksystem by tron1, TWRP tell me that the zip is incorrect and he can't flash it. I tried to download it again and again but still doesn't work.
fabro91 said:
Hi, when I try to flash stocksystem by tron1, TWRP tell me that the zip is incorrect and he can't flash it. I tried to download it again and again but still doesn't work.
Click to expand...
Click to collapse
Dont think the zip is incorrect. Flashed it without any errors. Others too. You're on latest 3.1.0.0 and SU2.79? Is zip in root of sd/internal?
No on external sd
---------- Post added at 05:33 PM ---------- Previous post was at 05:32 PM ----------
Didn't work with sideload anymore
I wanted to make sure everyone read this part first so that you know it's critical to backup because it happened to me figuring things out. If for any reason you are stuck in a boot loop, just reload twrp recovery and restore boot.img that you backed up for an easy quick fix.
Install drivers and adb on your PC.
Open command prompt or search 'cmd'.
Navigate to the directory with adb.exe
Download and store TWRP 2.2.2 (preferred) in the same directory where adb is located. Recommend renaming recovery file to recovery.img
Enable usb debugging on device by going to settings > about > and click on MIUI version repeatedly until developer settings are enabled. Go back and select additional settings to enable usb debugging.
Run the command: adb devices - to verify if able to connect to device (the serial number of your device will populate if so.
Run the command: adb reboot bootloader and phone device should say "Fastboot" in blue font
Run the command: fastboot boot recovery.img
Recovery will show in Chinese, click on the bottom right button to select English
May require to enter your default password you use to unlock your phone normally.
Click backup and be sure to backup system, boot, and recovery most of all so it's easy to recover your device moving forward.
Download and save SuperSU (I have been unsuccessful in getting Magisk to work at this time) onto storage device from PC to MI 8 that should appear with your Internal storage
Click on "Mount" in TWRP and unselect read-only
Click "Install" and flash SuperSU then reboot (my device rebooted one time and fully boot up the 2nd time so you're not alarmed)
Links:
SuperSU: https://download.chainfire.eu/1122/SuperSU/SR3-SuperSU-v2.82-SR3-20170813133244.zip?retrieve_file=1
TWRP: https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-2-0703-t38126005
Appreciate any feedback, ideas, thoughts, or suggestions where all can collaborate and expand where we help each other further. Look forward to the future development of the MI 8 folks! Please note, I wanted to share the method that seemed to work best for me, but please be aware each and every single MI 8 device is not always exactly the same and the end result may vary and I'm not held accountable or responsible should you choose to follow the directions listed above. However, I wanted to share this information to help avoid any frustration going forward and save you time.
p.s. - If someone could help me figure out how to get twrp recovery to hold and not end up being replaced by mi recovery I would be most grateful as this has been an issue for me (I tried flashing, booting, and installing the img through twrp with no success). Thank you.
Hello thanks for your guide but i think we first need to unlock bl And for the twrp recovery to stick and not to be replaced by xiaomi recovery we need to flash something called "dm-verity " it basically removes that check, which replaces any other recovery by xiaomi recovery
Have a nice day and thanks for your work
I thought so as well, unfortunately I just haven't had much luck with dm verity which led to a soft brick on my device. I'll have to look over the code as it may vary in comparison to other xiaomi devices.
Sent from my MI 8 using Tapatalk
Fastboot flash recovery Command should do it ..
mekaziah said:
I wanted to make sure everyone read this part first so that you know it's critical to backup because it happened to me figuring things out. If for any reason you are stuck in a boot loop, just reload twrp recovery and restore boot.img that you backed up for an easy quick fix.
Install drivers and adb on your PC.
Open command prompt or search 'cmd'.
Navigate to the directory with adb.exe
Download and store TWRP 2.2.2 (preferred) in the same directory where adb is located. Recommend renaming recovery file to recovery.img
Enable usb debugging on device by going to settings > about > and click on MIUI version repeatedly until developer settings are enabled. Go back and select additional settings to enable usb debugging.
Run the command: adb devices - to verify if able to connect to device (the serial number of your device will populate if so.
Run the command: adb reboot bootloader and phone device should say "Fastboot" in blue font
Run the command: fastboot boot recovery.img
Recovery will show in Chinese, click on the bottom right button to select English
May require to enter your default password you use to unlock your phone normally.
Click backup and be sure to backup system, boot, and recovery most of all so it's easy to recover your device moving forward.
Download and save SuperSU (I have been unsuccessful in getting Magisk to work at this time) onto storage device from PC to MI 8 that should appear with your Internal storage
Click on "Mount" in TWRP and unselect read-only
Click "Install" and flash SuperSU then reboot (my device rebooted one time and fully boot up the 2nd time so you're not alarmed)
Links:
SuperSU: https://download.chainfire.eu/1122/SuperSU/SR3-SuperSU-v2.82-SR3-20170813133244.zip?retrieve_file=1
TWRP: https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-2-0703-t38126005
Appreciate any feedback, ideas, thoughts, or suggestions where all can collaborate and expand where we help each other further. Look forward to the future development of the MI 8 folks! Please note, I wanted to share the method that seemed to work best for me, but please be aware each and every single MI 8 device is not always exactly the same and the end result may vary and I'm not held accountable or responsible should you choose to follow the directions listed above. However, I wanted to share this information to help avoid any frustration going forward and save you time.
p.s. - If someone could help me figure out how to get twrp recovery to hold and not end up being replaced by mi recovery I would be most grateful as this has been an issue for me (I tried flashing, booting, and installing the img through twrp with no success). Thank you.
Click to expand...
Click to collapse
Skickat från min MI 8 via Tapatalk
what issues do you get with magisk? I was able to flash it without any issues.
superior8888 said:
Fastboot flash recovery Command should do it ..
Skickat från min MI 8 via Tapatalk
Click to expand...
Click to collapse
Yes it does. Don't know why anyone would run SuperSU though.
mekaziah said:
I thought so as well, unfortunately I just haven't had much luck with dm verity which led to a soft brick on my device. I'll have to look over the code as it may vary in comparison to other xiaomi devices.
Click to expand...
Click to collapse
MAKE SURE U HAVE UNLOCKED BOOTLOADER
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
-fluffy- said:
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
Click to expand...
Click to collapse
Would you mind stating the version of Magisk?
Strange Guide no Attention for Unlok Bl.
barrielui said:
Would you mind stating the version of Magisk?
Click to expand...
Click to collapse
16.4
magisk has been working fine for me for a while
samwise110712 said:
what issues do you get with magisk? I was able to flash it without any issues.
Click to expand...
Click to collapse
What's your ROM version? I flash twrp then magisk, bootloop...
-fluffy- said:
MAKE SURE U HAVE UNLOCKED BOOTLOADER
here is wat i do
first i boot into twrp
(make sure u have rom.zip magisk/superuser.zip an twrp.img) on internal storage
then i wipe
dalvik cache
cache
data (NOT FORMAT)
system
then i flash
rom.zip
twrp.img
then i reboot recovery
fkash magisk.zip
then reboot system
now i have new rom an still have twrp on
Click to expand...
Click to collapse
Hello how did you flash the TWRP through the TWRP ???
What version of MiUi you have ???
omek07 said:
Hello how did you flash the TWRP through the TWRP ???
What version of MiUi you have ???
Click to expand...
Click to collapse
simple put twrp.img on ur storage
then flash img from twrp
-fluffy- said:
simple put twrp.img on ur storage
then flash img from twrp
Click to expand...
Click to collapse
Yes but its asking after in which partition.
What partition you chose ?
---------- Post added at 08:26 AM ---------- Previous post was at 07:41 AM ----------
-fluffy- said:
simple put twrp.img on ur storage
then flash img from twrp
Click to expand...
Click to collapse
Could you please tell me what rom you have ???
Thank you
omek07 said:
Yes but its asking after in which partition.
What partition you chose ?
---------- Post added at 08:26 AM ---------- Previous post was at 07:41 AM ----------
Could you please tell me what rom you have ???
Thank you
Click to expand...
Click to collapse
u choose recovery
im using miui eu
magisk is running without any issue.
i am on the newest xiaomi eu beta rom and flashed magisk 16.7 without any issue right now
(after waiting horrible 15 days for unlocking the bootloader)
Ok so both of you have the xiaomi eu. I have global stable 9.5.11. so maybe that's the problem
---------- Post added at 06:30 AM ---------- Previous post was at 06:29 AM ----------
So both of you have xiaomi eu rom. I have global stable 9.5.11. maybe that's the problem.
omek07 said:
Ok so both of you have the xiaomi eu. I have global stable 9.5.11. so maybe that's the problem
---------- Post added at 06:30 AM ---------- Previous post was at 06:29 AM ----------
So both of you have xiaomi eu rom. I have global stable 9.5.11. maybe that's the problem.
Click to expand...
Click to collapse
I have the lastest global version, I cannot get the root access...
Someone tell me flash the Chinese verision then flash xiaomi.eu and magisk.
felixrao said:
I have the lastest global version, I cannot get the root access...
Someone tell me flash the Chinese verision then flash xiaomi.eu and magisk.
Click to expand...
Click to collapse
My friend i changed to the Xiaomi eu and everything worked. You dont have to flash the Chinese Version first you can go from Global to Xiaomi.eu. Just dont forget to do FORMAT data and not only Wipe Data.
I prepared a stripped down version for NUBIA RED MAGIC 2.36 CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
I take out a lot of CN applications. You can flash over the OpenGAPPS and get Google applications, make the ROM more usable in the European countries.
DOWNLOAD
https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
Install:
- First: don't forget to backup your files, if you come from Global ROM you will need to erase also internal storage of your phone!
- you will need TWRP installed. Look how to in sakilxda's thread (thank you sakilxda! ): https://forum.xda-developers.com/red-magic/how-to/unlock-bootloader-flasah-twrp-nubia-red-t3828466
- Download Oppen Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
- copy the downloaded ROM and GAPPS in your phone's internal storage
- go in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
- go to install menu and chose the ROM add to zip list also the GAPPS you downloaded: IS IMPORTANT TO FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY!
- OPTIONAL: you can add also blu_spark r36 Red Magic's kernel (THANK YOU blu_spark) from: https://forum.xda-developers.com/red-magic/development/kernel-t3813055
- Wipe cache when finish and reboot!
Good luck!
Screen shots
Great! I am going to try now and will let you know the result. Thank you so much!
---------- Post added at 03:55 AM ---------- Previous post was at 03:52 AM ----------
I faced the error: "invalid zip file format" ----> this is my mistake, sorry ^^
---------- Post added at 04:17 AM ---------- Previous post was at 03:55 AM ----------
I have flashed but stucking at " checking for updates"...
---------- Post added at 04:42 AM ---------- Previous post was at 04:17 AM ----------
I have passed the problem. I am feeling happy with this rom. Thanks a lot!
---------- Post added at 04:50 AM ---------- Previous post was at 04:42 AM ----------
@ABM30: could you please guide me to root it?
Flash magisk zip file check xda through twrp and then install the magisk manager apk like any other app.
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
strakell said:
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
Click to expand...
Click to collapse
If you stuck on searching updates: just push power button and slide the restart button.
After this it will start over but will pass the update chek!
For root: download the magisk.apk and Magisk-v18.1(18100).zip from download link that I have given.
Put them in your phones internal storage. Install magisk.apk and run it once.
Then go in recovery TWRP and instal Magisk-v18.1(18100).zip, wipe cahe when asked.
Restart phone =>ROOTED!
You can find Magisk also in google Play!.
Have fun!
strakell said:
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
Click to expand...
Click to collapse
ok
1. The error: "invalid zip file format" ----> I forgot to extract the zip file that I download from Mega.nz .
2. Stucking at " checking for updates"... ---> I removed sim card then restarted. After that, I skipped all of setup steps. after all, I can access home screen launcher.
Now I found the bug: I can not access to "developer options" in settings
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
ABM30 said:
If you stuck on searching updates: just push power button and slide the restart button.
After this it will start over but will pass the update chek!
For root: download the magisk.apk and Magisk-v18.1(18100).zip from download link that I have given.
Put them in your phones internal storage. Install magisk.apk and run it once.
Then go in recovery TWRP and instal Magisk-v18.1(18100).zip, wipe cahe when asked.
Restart phone =>ROOTED!
You can find Magisk also in google Play!.
Have fun!
Click to expand...
Click to collapse
thank you, but where are download links of the magisk.apk and Magisk-v18.1(18100).zip that you told?
oh sorry, I have saw them: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
ABM30 could you please explain step by step how I can get twrp and how go back to official recovery so I can flash official ROM ,I really appreciate that!
strakell said:
ABM30 could you please explain step by step how I can get twrp and how go back to official recovery so I can flash official ROM ,I really appreciate that!
Click to expand...
Click to collapse
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
tlgod said:
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
Click to expand...
Click to collapse
Thank you very much for your time ,I think you forget to write in line 2 after the unlock bootloader what I have to type in adb for the custom recovery
tlgod said:
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
Click to expand...
Click to collapse
THANK YOU tlgod! Well done!
There is also the alternative to go back to official ROM:
1. Download the official ROM - CN or Global - you can find links in this thread
2. Copy ROM in internal storage (preferable in root)
3. Go in Settings-System Update-Menu (3 dots in upper right corner) - local update
4. Choose the ROM you downloaded and install > if you choose CN ROM: you are back to original recovery, boot, ROM
5. If you want to go back to global ROM you will have some more steps: need to wipe all USER DATA and CACHE in original Recovery after update (this will erase your internal memory !!!!!!!!!!!!!!! so BACKUP BACKUP....!!!!!!, now the phone can be restarted.
Global ROM will encrypt your Phone!!!! therefore when you go from Global to CN or back you need to wipe your USER DATA and lost everything from internal storage!!!!!!!!!!!!!
You can watch also: https://www.youtube.com/watch?v=z5wOxvzxrfQ
Is in Spanish but ..self explanatory
strakell said:
Thank you very much for your time ,I think you forget to write in line 2 after the unlock bootloader what I have to type in adb for the custom recovery
Click to expand...
Click to collapse
In download link I given you can find everything you need: ROM, Magisk and now also TWRP: twrp-3.2.3-0-nx609j.img
it can be used for TWRP installing as mentioned by tlgod!
tlgod said:
ok
1. The error: "invalid zip file format" ----> I forgot to extract the zip file that I download from Mega.nz .
2. Stucking at " checking for updates"... ---> I removed sim card then restarted. After that, I skipped all of setup steps. after all, I can access home screen launcher.
Now I found the bug: I can not access to "developer options" in settings
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
thank you, but where are download links of the magisk.apk and Magisk-v18.1(18100).zip that you told?
oh sorry, I have saw them: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
Click to expand...
Click to collapse
Yes, I put everything in one folder (ROM Magisk.apk and zip, twrp), so you don't need another link.
For developer bug: you need to root the phone and you will get acces to developer options!
P.S. Sometimes a restart is also a good option!
ABM30 said:
In download link I given you can find everything you need: ROM, Magisk and now also TWRP: twrp-3.2.3-0-nx609j.img
it can be used for TWRP installing as mentioned by tlgod!
Click to expand...
Click to collapse
Like this:
fastboot flash recovery twrp-3.2.3-0-nx609j.img
Is it correct?
strakell said:
Like this:
fastboot flash recovery twrp-3.2.3-0-nx609j.img
Is it correct?
Click to expand...
Click to collapse
rename the recovery twrp-3.2.3-0-nx609j.img to recovery.img and then: fastboot flash recovery recovery.img this is how it worked to me.
ABM30 said:
rename the recovery twrp-3.2.3-0-nx609j.img to recovery.img and then: fastboot flash recovery recovery.img this is how it worked to me.
Click to expand...
Click to collapse
Now I get it right. Thanks.
ABM30 said:
Yes, I put everything in one folder (ROM Magisk.apk and zip, twrp), so you don't need another link.
For developer bug: you need to root the phone and you will get acces to developer options!
P.S. Sometimes a restart is also a good option!
Click to expand...
Click to collapse
Thank you, I have done that and It works!
A little help please , I did the procedure to unlock bootloader and flash custom recovery all went ok right away from the fastboot mode I went to twrp which was in Chinese I change the language to English I didn't do anything enything else because for now I only wanted to have custom recovery to flash magisk, i reboot to ROM I had all nice till now but when I'm trying to reboot to recovery to flash magisk I can't find the twrp only official recovery ,what am I doing wrong?
strakell said:
A little help please , I did the procedure to unlock bootloader and flash custom recovery all went ok right away from the fastboot mode I went to twrp which was in Chinese I change the language to English I didn't do anything enything else because for now I only wanted to have custom recovery to flash magisk, i reboot to ROM I had all nice till now but when I'm trying to reboot to recovery to flash magisk I can't find the twrp only official recovery ,what am I doing wrong?
Click to expand...
Click to collapse
Unfortunately it has happened to me also at the beginning. My unlocking counter is at 20.
So you need to do the following:
Unlock your bootloader again, flash TWRP (again ), go through ROM install procedure (again) as I mentioned in 1st post, but this time put also blu_spark r36 Red Magic's kernel in zip list to be flashed. In this way the original kernel (which has some security measures implemented in it and in case of some modifications in ROM it will overwrite the recovery with a backup from internal memory, I think is located in DATA folder...) will be overwritten and recovery will be preserved. At least this procedure I find at this moment.
Good Luck!
i'm try Red Magic OS V3.06 android Pie, and new Game Mode are perfect, but not have gapp, im test flash gapp in twrp but not work, you can pls help me add opengapp to new rom.
Thanks you very much.
chipheo62 said:
i'm try Red Magic OS V3.06 android Pie, and new Game Mode are perfect, but not have gapp, im test flash gapp in twrp but not work, you can pls help me add opengapp to new rom.
Thanks you very much.
Click to expand...
Click to collapse
Till now I didn't succeed to, but keep working on.