LIneageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), re-branded CyanogenMod, which is designed to increase performance and reliability over stock Android for your device. However, the ROM here will have full Substratum Support in addition to the stock LineageOS features.
Code:
#include
using xdarules std;
/*
* Your warranty was void as soon as you unlocked your phone.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation
Boot into Recovery Mode.
Make apt backups. (Optional ofcourse)
Wipe System, Data, Cache and ART Cache.
Flash the ROM zip.
Flash the GApps zip.
Reboot to System.
NON-ROOTED. Why?
Simply because some people want MagiskSU and some want SuperSU while some don't want root at all. [emoji14]
Downloads/links
TWRP: https://forum.xda-developers.com/g5-plus/development/unofficial-twrp-3-1-0-0-moto-g5-plus-t3576575
Or http://cloud.vache-android.com/Moto/potter/TWRP/
Older builds by me: XDA Thread
Beans GApps: XDA Thread
Magisk: Magisk SuperSU: SuperSU
Bugs:
Same as on LineageOS.
Special Thanks:
Google powered AOSP Project
LineageOS Official Project @vache and @Santhosh M for TWRP @vache again for bringing up LineageOS for the device. Thanks a lot for the trees. @Chainfire for SuperSU and @topjohnwu for Magisk.
@nicholaschum for Substratum.
Sources:
Device Tree
Kernel Tree
Vendor Tree
XDA:DevDB Information
LineageOS - OMS [potter], ROM for the Moto G5 Plus
Source Code:
LineageOS Git
Substratum Git
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest stock firmware
Based On: LineageOS/CyanogenMod
Version Information
Status: Stable
XDA:DevDB Information
LineageOS OMS [substratum][potter], ROM for the Moto G5 Plus
Contributors
tywinlannister7, fAIyaZ
Source Code: https://github.com/LineageOMS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest stock firmware
Based On: LineageOS/Cyanogenmod 14.1
Version Information
Status: Stable
Created 2017-05-18
Last Updated 2017-07-10
Reserved. :good:
Thanks for this Rom!
ROM link has been fixed :good:
Nice addition for the themers under us! Unfortunately I'm not a themer, so I'll stick to the version of @vache. But really: good job! Thanks!
Send from my Motorola Moto G5 Plus (XT1685) using Tapatalk
All updates whenever released will be uploaded to my Sourceforge folder . Download link updated in the OP too.
https://sourceforge.net/projects/lineageos-oms/files/potter/
Mega Update
Clean flash needed.
Lots of stuff removed and added better visit this link:
Changelog:
https://github.com/tywinlannister7/Changelogs/blob/cm-14.1/Changelog.txt
Main highlight is support for Signature Spoofing.
Downloads:
https://sourceforge.net/projects/li...-14.1-20170703-UNOFFICIAL-potter.zip/download
Possible bugs:
Gallery FC on setup.
Moto Camera unable to read external sd
Thanks to @GtrCraft for providing the Moto Camera.
Happy flashing
Thanks for the ROM.
Hmm, so you guys might expect reversal of the changes from the last build. From now on, @fAIyaZ will continue maintaining stock LineageOS-OMS . Thanks all.
The new lineage-oms build is up with latest upstreamed kernel version 3.18.60.
https://drive.google.com/file/d/0B0Shi5PlqH3LcnhKRzBKN3I1UHc/view?usp=drivesdk
Enjoy!
New lineage-OMS build is up.
https://drive.google.com/drive/mobile/folders/0B0Shi5PlqH3LRkRSZEhPYTFpTGc
Changes are same as here https://forum.xda-developers.com/showpost.php?p=73078789&postcount=600 + upstreamed kernel to 3.18.61.
Kernel source:-http://github.com/faiyazsheth/noobkernel
New build is up guys
Changes
Added bugs more bugs to fix maybe later.
Upstreamed kernel to 3.18.63(latest up to date)
More bugs added.
Some love added too.
Kernel source:-http://github.com/faiyazsheth/noobkernel
Enjoy!
Wait...... Link is here:-https://drive.google.com/file/d/0B0Shi5PlqH3LdHZReWVvbThoa1U/view?usp=drivesdk
fAIyaZ said:
New build is up guys
Changes
Added bugs more bugs to fix maybe later.
Upstreamed kernel to 3.18.63(latest up to date)
More bugs added.
Some love added too.
Kernel source:-http://github.com/faiyazsheth/noobkernel
Enjoy!
Wait...... Link is here:-https://drive.google.com/file/d/0B0Shi5PlqH3LdHZReWVvbThoa1U/view?usp=drivesdk
Click to expand...
Click to collapse
More bugs added?
Is this thread dead?
---------- Post added at 02:40 PM ---------- Previous post was at 02:40 PM ----------
Also pls tell how to change from vaches los to this....
Jayesh Nirve said:
Is this thread dead?
---------- Post added at 02:40 PM ---------- Previous post was at 02:40 PM ----------
Also pls tell how to change from vaches los to this....
Click to expand...
Click to collapse
No? I mean, it was last updated just a week ago. And just do a clean flash?
Update
New update is out:
https://drive.google.com/file/d/0B0Shi5PlqH3Lb01fVUZ5N2I0V3M/view?usp=drivesdk
Nice work as always noob sir, @fAIyaZ [emoji12]
rajatgupta1998 said:
Update
New update is out:
https://drive.google.com/file/d/0B0Shi5PlqH3Lb01fVUZ5N2I0V3M/view?usp=drivesdk
Nice work as always noob sir, @fAIyaZ [emoji12]
Click to expand...
Click to collapse
Link not working
Sent from my Moto G (5) Plus using Tapatalk
Related
This is crDroid for Moto E 2nd Generation (OTUS and Surnia)
crDroid build will always mainly be based on CyanogenMod with some extra and few features (Cool and useful)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlocked and updated Bootloader
Code:
WORKING
- Everything as in CM
Bugs
- You tell me (With logcats :P)
Code:
CREDITS
CM Rom
Slim Rom
Omni Rom
Many More.....
Kernel
Device tree
Lollipop builds are in 3rd post.
XDA:DevDB Information
CrDroid for otus and surnia, ROM for the Moto E 2015
Contributors
Vatsal
Source Code: github.com/crdroidandroid
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-01-13
Created 2015-09-09
Last Updated 2016-01-13
Enjoy to Our Site on Google Plus
Download
Help us with Translations
Donate to Maintain our build server
Demo Video
Download Gapps For Lollipop
Old lollipop builds.
Since lollipop is EOL(End of life) now, All the old lollipop builds can be found here.
Download
Thanks good work.
Thanks for take this proyect .
Greetings.
New build is up
Download
Changelog
Hi, a question....
Is there any way to put ringtones and notification sounds to zip before installing the rom?
Casper1982 said:
Hi, a question....
Is there any way to put ringtones and notification sounds to zip before installing the rom?
Click to expand...
Click to collapse
Nope ... but you can download some from the application after Zedge
New build is up
Download
Changelog
New build is up
Download
Changelog
New build is up
Download
Changelog
Enjoy
New build is up
Download
Changelog
Enjoy
Weekend Update
Test build for Surnia is up
Otus
Surnia
Changelog
Test build for Surnia is up
Thank you so much for the surnia build... Downloading and flashing, I'll report back
Sent from my XT1526 using Tapatalk
Surnia build is running great for me so far but I flashed the latest Squid kernel over the build before trying it with it's original baked in kernel
Sent from my XT1526 using Tapatalk
Starting with Surnia testing...flashing squid kernel after a few reboots.
Running it for about 24hrs now. Seems pretty solid so far. I did switch kernels after a couple hours the built in kernel was a bit choppy, no random reboots or anything just a bit laggy.
Sent from my XT1526 using Tapatalk
So far this ROM (surnia version) coupled with the latest Squid kernel equals the smoothest most responsive ROM to have been on by phone since stock... Thank you for the great work, keep it up
Sent from my XT1526 using Tapatalk
This rom is awesome
---------- Post added at 12:22 PM ---------- Previous post was at 12:20 PM ----------
I recommend using this rom with Squid Kernel why the wifi did not connect with the original kernel!
Weekend update
Otus
Surnia
Changelog
Happy Weekend!
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for Huawei G620s/Honor 4/4x(msm8916). The following will not be supported here:
Custom kernels
Mods
Xposed
Supported device:
C8817D
C8817E
G620S-UL00
G620S-L01/L02/L03
G621-TL00
Che1_CL10
Che1_CL20
Che1_L04
Baseband requirement:
If you can't hang up, install this baseband via TWRP and it should be solved.
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
No NFC support Done by Blefish
For some users, you may meet some stability issues(related to your EMUI base)
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, e.g., my TWRP: https://forum.xda-developers.com/honor-4x/development/recovery-twrp-3-0-0-0-touch-recovery-t3309504
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm)
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
Blefish (This won't happen without his remarkable work!)
......
Download:
Che1-CL10: https://download.lineageos.org/che10
Others: https://download.lineageos.org/cherry
XDA:DevDB Information
LineageOS, ROM for the Honor 4x
Contributors
dianlujitao, blefish
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2017-01-30
Last Updated 2017-03-21
@dianlujitao @Blefish
great job !! thank you very much !!:good:
edit : The installation fails if you mark the signature verification in TWRP.
Is Volte/IMS feature enabled?
custon3 said:
@dianlujitao @Blefish
great job !! thank you very much !!:good:
edit : The installation fails if you mark the signature verification in TWRP.
Click to expand...
Click to collapse
That option has to be unmarked, that error occurs in all roms. :good:
I've flashed the su binary attached here. But I can't get root privileges. What to do ?
GLokin666 said:
That option has to be unmarked, that error occurs in all roms. :good:
Click to expand...
Click to collapse
In Roms CM 12.1/13.0 and Mokee 60.1/71.1 verifies the signature without failures.
---------- Post added at 06:03 PM ---------- Previous post was at 05:52 PM ----------
gvrgvr said:
I've flashed the su binary attached here. But I can't get root privileges. What to do ?
Click to expand...
Click to collapse
Enables administrative access in the development menu
There is a very big problem when the wi fi signal is low, then reset the phone and it happens very often.
The rest is very good.
Great. A build is finally here. I had been having problems recently with the cm13 and was waiting for a lineage os. But didn't think it'd be this soon.
But before I switch, I just want to confirm, is it stable? Or do you suggest I should wait for a more stable version?
If anyone has tried please comment your views about this rom.
Thank you in advance!
gvrgvr said:
I've flashed the su binary attached here. But I can't get root privileges. What to do ?
Click to expand...
Click to collapse
Interesting! Flashing su binaries enabled the option, to enable/disable root privileges under developer settings. I see the root privileges.
---------- Post added at 10:14 PM ---------- Previous post was at 10:12 PM ----------
I couldn't see the VoLTE feature anywhere... May I know by when we can see the VoLTE enabled in the ROM ?
https://download.lineageos.org/extras
Embeddednut said:
Interesting! Flashing su binaries enabled the option, to enable/disable root privileges under developer settings. I see the root privileges.
---------- Post added at 10:14 PM ---------- Previous post was at 10:12 PM ----------
I couldn't see the VoLTE feature anywhere... May I know by when we can see the VoLTE enabled in the ROM ?
Click to expand...
Click to collapse
I think you misunderstood what I said. I was able to enable the root after flashing the su binaries.
But one think I would like to know is as how can we know if Volte is enabled into the ROM without even flashing it. Any suggestions are welcome.
Flashed the su from link.
Saw the root privileges in dev options.
Enabled it.
Opened es file explorer pro. Enabled root explorer.
Asked for root permissions. Gave the permissions.
It says "test failed. It won't work in this device"
What to do ???
What if I flash supersu 2.79 instead of su included in lineage os page ??
dianlujitao said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for OnePlus 3. The following will not be supported here:
Custom kernels
Mods
Xposed
Supported device:
C8817D
C8817E
G620S-UL00
G620S-L01/L02/L03
G621-TL00
Che1_CL10
Che1_CL20
Che1_L04
Baseband requirement:
If you can't hang up, install this baseband via TWRP and it should be solved.
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
No NFC support
For some users, you may meet some stability issues(related to your EMUI base)
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, e.g., my TWRP: https://forum.xda-developers.com/honor-4x/development/recovery-twrp-3-0-0-0-touch-recovery-t3309504
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm)
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
Blefish (This won't happen without his remarkable work!)
......
Download:
Che1-CL10: https://download.lineageos.org/che10
Others: https://download.lineageos.org/cherry
XDA:DevDB Information
LineageOS, ROM for the Honor 4x
Contributors
dianlujitao, blefish
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2017-01-30
Last Updated 2017-01-30
Click to expand...
Click to collapse
What about the camera? does it have the pro mode to manually adjust focal length, exposure, etc?
data is not working
shubham412302 said:
data is not working
Click to expand...
Click to collapse
Check the configuration of your APN ,to me they work correctly in both 3G and 4G.
Great job！But it often randomly auto reboots..
Can we have VoLTE patch for Honor 4X just like we have for Redmi note 3.
Please see the details of this patch at below link https://forum.xda-developers.com/re...t/volte-patches-nougat-based-cm-roms-t3509257
fix random reboot (wifi and data) after enable/disable airplane mode @Blefish @dianlujitao https://github.com/mparus/android_k...mmit/ef53d6fb757f10f338ebcdcbec14af04e89412c3
Jenkins again failed in build !! two failures of three build !!
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
BUG REPORTS / KNOWN ISSUES
https://jira.lineageos.org
- IR: not supported
- Fingerprint: Fingerprint will crash/reboot on first boot. After this glitch should be fine.
GOT QUESTIONS?
http://wiki.lineageos.org/zl1_info.html
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
HOW TO INSTALL LINEAGEOS
- Make sure your phone is running 19S bootloader or higher
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP. (see Downloads)
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- IMPORTANT: Do a Factory Reset. (Wipe data & cache)
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
Click to expand...
Click to collapse
HOW TO INSTALL TWRP
- Enable developer options
- Allow oem unlock
- Power off
- Hold Volume down + Power for Fastboot mode
- fastboot oem unlock-go
- fastboot flash recovery twrp.img
- fastboot boot twrp.img
Click to expand...
Click to collapse
DOWNLOADS
LineageOS:
https://download.lineageos.org/zl1
Google Apps:
http://opengapps.org/ (recommended: ARM64, 7.1, nano)
SU-Addon:
https://download.lineageos.org/extras
TWRP-Recovery:
https://dl.twrp.me/zl1/
SOURCECODE
Device tree: https://github.com/LineageOS/android_device_leeco_zl1
Kernel: https://github.com/LineageOS/android_kernel_leeco_msm8996
HOW TO CONTRIBUTE
Use our code review system to send patches: https://review.lineageos.org
XDA:DevDB Information
LineageOS 14.1 Weekly Bulids (X710/X727, zl1, pro3), ROM for the LeEco Le Pro3
Contributors
jrior001, codeworkx
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Beta Release Date: 2017-03-18
Created 2017-03-19
Last Updated 2018-02-25
All, please keep in mind moving between official & unnoficial builds of any version requires a full wipe/clean flash
Omg a god. 7.1.1 with camera for the beast
Seems to be amazing:cyclops:
Gonna try it today,
Thanks
Amazing work guys! Rom runs amazing!
How is the camera app? It was pretty bad for me on the 13 LOS.
Anyone else have the crash when setting up the fingerprint in the initial setup?
thesingh603 said:
Anyone else have the crash when setting up the fingerprint in the initial setup?
Click to expand...
Click to collapse
For many ROMs, that's a scheduled reboot that's needed for configuring the fingerprint sensor. Its normal.
---------- Post added at 03:38 AM ---------- Previous post was at 03:31 AM ----------
Also, wouldn't the 7.1 GAPPS be needed, not 6.0?
thesingh603 said:
Anyone else have the crash when setting up the fingerprint in the initial setup?
Click to expand...
Click to collapse
Yes, will update op. Likely will crash once and be fine. Forgot that still happens on clean install.
Sent from my LEX727 using Tapatalk
Some confusion with this thread.
Topic says Official but file says Unofficial.
Gapps recommendation says to use 6.0.
xiton said:
Some confusion with this thread.
Topic says Official but file says Unofficial.
Gapps recommendation says to use 6.0.
Click to expand...
Click to collapse
Cleaned up.
I tried to install 7.1 Arm 64 gapps Pico launcher is crashing on boot constantly.
---------- Post added at 03:38 AM ---------- Previous post was at 03:31 AM ----------
[/COLOR]Also, wouldn't the 7.1 GAPPS be needed, not 6.0?[/QUOTE]
That's what I thinking. Does it work with 7.1 gapps?
Installed with aroma. No issues yet. Will report standby drain tomorrow
benjmiester said:
---------- Post added at 03:38 AM ---------- Previous post was at 03:31 AM ----------
[/COLOR]Also, wouldn't the 7.1 GAPPS be needed, not 6.0?
Click to expand...
Click to collapse
That's what I thinking. Does it work with 7.1 gapps?[/QUOTE]
Clean flash... I have been running since this morning and 0 issues
Its Gapps 7.1 arm64..I used pico
Wooohoo. Cant wait to try. Congrats guys, and a big thank you.
goood morning, i know this version is quite new. But is it suitable for daily use? Or much bugs?
Should i use instead LineageOS 13.0 instead of this one for some time ?
Keep up the good work you both!!
I used gapps 7.1 and it's working fine.
andiak said:
goood morning, i know this version is quite new. But is it suitable for daily use? Or much bugs?
Should i use instead LineageOS 13.0 instead of this one for some time ?
Click to expand...
Click to collapse
No bugs at all
Wonderful rom
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), re-branded CyanogenMod, which is designed to increase performance and reliability over stock Android for your device. However, the ROM here will have full Substratum Support, in addition to stock LineageOS features.
Code:
#include <disclaimer.h>
using xdarules std;
/*
* Your warranty was void as soon as you unlocked your phone.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES:
Installation
WARNING: These are blind builds. I do not own the device but yes the ROM will be tested by a few people. Bugs are (were) similar to that on stock LineageOS for the device. Testers are always welcome. ( t.me/tywinlannister7). The ROM will be updated whenever I get time and feel that an update is pending for the latest changes/fixes.
Unlock bootloader if not already done.
Flash TWRP Custom Recovery via fastboot.
Boot into Recovery Mode. (Custom Recovery Environment needed)
Make apt backups.
Wipe System, Data, Cache and ART Cache.
Flash the ROM zip.
Flash the GApps zip.
Reboot to System.
NON-ROOTED. Why?
Simply because some people want MagiskSU and some want SuperSU while some don't want root at all.
Downloads/links
TWRP: Latest 3.1.0 from here:
https://forum.xda-developers.com/g4-play/development/twrp-twrp-moto-g-play-t3453888
ROM: Sourceforge Folder
Open GApps: XDA Thread
Beans GApps: XDA Thread
Magisk: Magisk SuperSU: SuperSU
XDA:DevDB Information
LineageOS OMS [substratum][harpia], ROM for the Moto G4 Play
Contributors
tywinlannister7
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Stock Firmware
Based On: LineageOS
Version Information
Status: Testing
Created 2017-05-20
Last Updated 2018-11-04
Reserved :good:
@tywinlannister7
Finally, a ROM with no root, slim and with OMS. Something which squid2, Subhrajyothi Sen and others couldn't mimic (maybe Slim 7, but the download link is dead) Hats off from me!
Great work! Are you able to auto-build the rom whenever there is a lineagaOS build?
thanhvx said:
Great work! Are you able to auto-build the rom whenever there is a lineagaOS build?
Click to expand...
Click to collapse
Nope, I haven't set a server yet. Although, you will find the builds in my sourceforge folder. I will create builds whenever there is an update to be looked into and when I get time.
UPDATE: 22 May 2017
(wasn't able to post yesterday)
Download links are in the OP.
Changelog:
Code:
Deskclock: Revert "Fix alarm not firing in memory-pressure situations"
Source fixes
Building fixes from LineageOS git
Next update?
Ashutosh Sundresh said:
Next update?
Click to expand...
Click to collapse
https://forum.xda-developers.com/g4...ypheros-3-6-2-macchiato-t3596144/post72533942
Davey126 said:
https://forum.xda-developers.com/g4...ypheros-3-6-2-macchiato-t3596144/post72533942
Click to expand...
Click to collapse
Ummmm.........
Ashutosh Sundresh said:
Ummmm.........
Click to expand...
Click to collapse
Asking for ETAs isn't good. Please wait for the updates or use another ROM. And follow XDA Rules.
So @Bingo Bronson hates me and takes the chance to blow me every single time. Anyways, I heard Slim7 is back, anybody tried?
Changelog:
Android N 7.1.2_r17 merged
Fix Jelly conflicts
tywinlannister7 said:
Changelog:
Android N 7.1.2_r17 merged
Fix Jelly conflicts
Click to expand...
Click to collapse
Thx
XenonHD Revolution ROM is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and smoothness over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
XenonHD Revolution is based on XenonHD which is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps).
Anywone who wishes to contribute to XenonHD Revolution is free to give their feedback in this thread.
Important information:
This thread is for XenonHD Revolution builds for LeEco Le Max 2.
If you have problems after flashing any custom kernels please provide a log in the thread where you got the kernel from and not here!
I don't want to see anything about Antutu scores here because it's bs, it's all synthetic
Known bugs:
Any current XenonHD official build bugs
Features:
All features from XenonHD
Customizations
Snapdragon LLVM Compiler 3.8.8 and the latest google's clang for host
Kernel/ROM is compiled using bleeding edge GCC 6.x toolchain based on UBER
SQLite, Skia, Libpng, Libcore, WebP, Jemalloc, ART, Bionic, Dalvik, Zlib, libjpeg-turbo, gemmlowp (mainly from BenzoRoms sources, it is more up to date and optimized).
Kernel with optimizations, additional tweaks and updates (based on Blackscreen and Blu_spark kernel, also I suggest to use this one)
UBER-ified JustArchi's ArchiDroid Optimizations (O3, Graphite, Strict Aliasing, OpenMP, etc.)
SDCLANG LTO implemented and applied on several parts which have impact on performance
Patches related to overall responsiveness, smoothness and user experience
A few additional practical settings/tweaks
Blu_active
Upstreamed kernel
Slim trees
Other things I forgot about
Download:
Rom: https://drive.google.com/file/d/1eaxR0lxxMOj-KLshZ24kPF0-Nqx3O611/view
Gapps: https://mega.nz/#!bRp0lY5T!kolt9BqLZal5pr4viK1gnHIFN7vior2pZOZjySxRcA4
Any would do
Installation:
First time flashing XenonHD Revolution on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (See #2 for details)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash Black ROM
Install Magisk or any addons
Reboot
Credits:
XenonHD Team & Contributors
Big big thanks to @idprophecy ,he made all of this possible
Another big shout out to @spezi77 and @quake73
@DespairFactor for his Uber Toolchain
@mosimchah for his kernel
@moto999999 for his slim trees, great thanks
My testers: @VC-34 @LoBinS @bubu83
@ThE_MarD for being an awesome person, testing and his thread template
BenzoRoms, The pixel dust project, JustArchi, Qualcomm, DU, FranciscoFranco
Blu_spark
And anyone who I may have missed
If you like the rom and you're feeling generous : paypal.me/AdumitroaieVlad
XDA:DevDB Information
BlackX ROM for the Le Max 2
Contributors
KuranKaname,
Source Code XenonHD: https://github.com/TeamHorizon
My Source Code (it's a mess): https://github.com/celtare21
ROM OS Version: 7.x Nougat
Version Information
Status: Release build
Created 2017-12-06
Last Updated 2017-12-06
P.S. do not call me a dev.
XDA:DevDB Information
XenonHD, ROM for the LeEco Le Max 2
Contributors
KuranKaname
Source Code: https://github.com/celtare21
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: XenonHD
Version Information
Status: Nightly
Created 2017-12-10
Last Updated 2017-12-22
Release note:
Initial release version
XenonHD - 2017-12-11
Optimized framework
FAQs:
My status bar quick pulldown and notification slider are broken, why?
See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard
Latest Firmware files for LeEco Le Max 2 (last updated 2017-08-24)
Make a nandroid backup before you proceed
Flash the following files using the any TWRP build other than 3.1.1.1 (due to flash errors others have had) twrp to avoid any recovery related issues.
Make sure to do a clean flash if your rom requires an updated firmware.
Instructions
1- Clean flash is recommended.
2- Flash http://www.mediafire.com/file/7oc7d4wj4uxvn1p/LeMax2_CN26S_V2_FirmwareUpdate.zip
3-Flash the latest XenonHD from this thread.
5-Wipe Dalvik/cache and reboot.
If you have problems after flashing any custom kernels please provide a log in the thread where you got the kernel from and not here!
Screenshots?
Wonderful! Can we get to know the features of this rom? Thanks a lot for your hardwork.
Mahz4130 said:
Wonderful! Can we get to know the features of this rom? Thanks a lot for your hardwork.
Click to expand...
Click to collapse
http://www.xenonhd.com/home/gallery/
Here is the list of features with screens.
Hi @KuranKaname what is your take on the blackx rom or this?ur latest blackx is the smoothest rom ever from all the rom i try so should i try this too only thing about blackx is the battery consumption could be better
Is one of the XenonHD developers, Daniel Sikorski from Poland?
Mahz4130 said:
Wonderful! Can we get to know the features of this rom? Thanks a lot for your hardwork.
Click to expand...
Click to collapse
And my added features are in the op
man2106 said:
Hi @KuranKaname what is your take on the blackx rom or this?ur latest blackx is the smoothest rom ever from all the rom i try so should i try this too only thing about blackx is the battery consumption could be better
Click to expand...
Click to collapse
This one is even smoother . You can see all the optimizations added. You can improve battery with kernel Adiutor
YelloneK said:
Is one of the XenonHD developers, Daniel Sikorski from Poland?
Click to expand...
Click to collapse
I don't know, check their team )
https://drive.google.com/file/d/1eaxR0lxxMOj-KLshZ24kPF0-Nqx3O611/view?usp=drivesdk
Update for XenonHD
Optimized framework
Maybe you can add magisk permanently to the rom?
KuranKaname said:
https://drive.google.com/file/d/1eaxR0lxxMOj-KLshZ24kPF0-Nqx3O611/view?usp=drivesdk
Update for XenonHD
Optimized framework
Click to expand...
Click to collapse
just clean flash ur updated rom but too many things are missing in xenon configuration like no battery percentage etc cos i am using xenonhd on my mi max n it has all the available setting same like rr.another thing developers setting is not available, hardware buttons not working n quick setting panel only open half nice work though temporarily back to black x for now
open_gapps-arm64-7.1-pico-20170923-modified........
What modification do they carry?
man2106 said:
just clean flash ur updated rom but too many things are missing in xenon configuration like no battery percentage etc cos i am using xenonhd on my mi max n it has all the available setting same like rr.another thing developers setting is not available, hardware buttons not working n quick setting panel only open half nice work though temporarily back to black x for now
Click to expand...
Click to collapse
I used their sources and I didn't touch them. I'll look to see if I missed anything but it wasn't mentioned anywhere
pepote666 said:
open_gapps-arm64-7.1-pico-20170923-modified........
What modification do they carry?
Click to expand...
Click to collapse
Just setup wizard removed
KuranKaname said:
I used their sources and I didn't touch them. I'll look to see if I missed anything but it wasn't mentioned anywhere
Click to expand...
Click to collapse
not sure where it went wrong but i flash ur latest rom never flash the rom on the front page
This is my favourite ROM. A moment after installing without any settings. Look at the screenshot.
dolby does not open and you can change louncher to another Because I can not restore Nova prime copy in titanium.