- AP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT_meta.tar
- BL_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CSC_ATT_G930AATT4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
Yep, muniz_ri came through again! Thanks...
Switching between AT&T and U firmware more often than using the phone LOL. It would really suck without full firmware!
is this an official firmware? do i need an official odin?
yes and yes
ok thank you!
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
one last question. it doesn't matter on what firmware i was before right?
davidmclaren said:
ok thank you!
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
one last question. it doesn't matter on what firmware i was before right?
Click to expand...
Click to collapse
Correct
I have tried to use Odin (3.12.3 and 3.12.17) to flash fhese .tar files; however, Odin does not see any files in the folder. Yesterday, I was able to flash an older version of Nougat with a .tar.md5 filename just fine. But it does not see the .tar files at all.
Any help would be greatly appreciated.
buddesc said:
I have tried to use Odin (3.12.3 and 3.12.17) to flash fhese .tar files; however, Odin does not see any files in the folder. Yesterday, I was able to flash an older version of Nougat with a .tar.md5 filename just fine. But it does not see the .tar files at all.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Did you extract the files once you downloaded them?
You have to extract the files.
dirtydodge said:
Did you extract the files once you downloaded them?
Click to expand...
Click to collapse
No. I did not. Thank you.
muniz_ri said:
- AP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT_meta.tar
- BL_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CSC_ATT_G930AATT4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
Click to expand...
Click to collapse
Are these to flash from G935A to Unlocked variant? Also what android version are they?
photobumm said:
Are these to flash from G935A to Unlocked variant? Also what android version are they?
Click to expand...
Click to collapse
This doesn't unlock anything. Did you look at the file name to see what "version" they are. Kinda is spelled out in the first 13 or so letters and numbers. Also, these files are for the S7 flat
dirtydodge said:
This doesn't unlock anything. Did you look at the file name to see what "version" they are. Kinda is spelled out in the first 13 or so letters and numbers. Also, these files are for the S7 flat
Click to expand...
Click to collapse
First comment mentioned "Switching between AT&T and U firmware" so I figured these files had something to do with that switch.
photobumm said:
First comment mentioned "Switching between AT&T and U firmware" so I figured these files had something to do with that switch.
Click to expand...
Click to collapse
Oh OK. I see where that could be confusing, there meaning the Muniz is working on both, this firmware and the U firmware.
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
I am not sure.
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
I think it will, qd4 is latest stock unrooted.
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
If you mean sim unlock, the answer is no. Flashing firmware does not lock an unlocked device.
Has anyone tried to root this yet
For those who have used this and 7.0 U firmware, which do they find faster and more stable?
I found them to perform identically.
Related
Reason why I am asking this is because I'm currently out of the country and wondering how or where to find the firmware for the verizon note 2. Any help would be appreciated. Thank you
Lemmy84 said:
Reason why I am asking this is because I'm currently out of the country and wondering how or where to find the firmware for the verizon note 2. Any help would be appreciated. Thank you
Click to expand...
Click to collapse
I'm wondering this as well, since my phone no longer has an active Verizon SIM in it. Was hoping the update would show up in Kies so I could update that way, but it's still showing 4.3 as the latest. I haven't seen anyone post a dump yet that could be flashed with Odin. I assume this will be the "normal" way to do the upgrade aside from OTA?
Me too.....
We need to wait for sammobile.com to upload the firemware (i605VRUFND7). You can register to this website and download the firmware.
You can use ODIN to flash it.
But sammobile.com not yet uploaded the firmware....waiting
kanthi1979 said:
Me too.....
We need to wait for sammobile.com to upload the firemware (i605VRUFND7). You can register to this website and download the firmware.
You can use ODIN to flash it.
But sammobile.com not yet uploaded the firmware....waiting
Click to expand...
Click to collapse
Good to know I'm not the only one in this situation. Can I root my phone first then update?
http://www.android.gs/update-verizo...-official-android-4-4-2-vrufnd7-ota-firmware/
i've used this guide
it has the vrufnd7 update firmware from sammobile
****tyMF said:
http://www.android.gs/update-verizo...-official-android-4-4-2-vrufnd7-ota-firmware/
i've used this guide
it has the vrufnd7 update firmware from sammobile
Click to expand...
Click to collapse
Sammobile's vrufnd7 seems to be corrupt, won't unzip
---------- Post added at 10:51 AM ---------- Previous post was at 10:24 AM ----------
lvov7342 said:
Sammobile's vrufnd7 seems to be corrupt, won't unzip
Click to expand...
Click to collapse
there's also this, trying it now
http://samsung-updates.com/details/29538/Galaxy_Note_2_Verizon/SCH-I605/VZW/I605VRUFND7.html
It looks like the update is now on Kies 3 as well. I have my phone plugged in and updating using that method right now.
The SamMobile download works if you log out and then back in again.
bodyky said:
The SamMobile download works if you log out and then back in again.
Click to expand...
Click to collapse
Not really. I've tried logging in/out on multiple PCs v& I still end up with a 500MB download that is corrupt
The update using Samsung Kies worked great and only took a few minutes. Didn't have to bother with downloads from slow, unofficial sites - just plug in the phone, click update, and wait 5 minutes.
jimmyz80 said:
The update using Samsung Kies worked great and only took a few minutes. Didn't have to bother with downloads from slow, unofficial sites - just plug in the phone, click update, and wait 5 minutes.
Click to expand...
Click to collapse
Awesome ..gotta get this updated for GF...data was kept correct ?
M8 tap'd
bkdodger said:
Awesome ..gotta get this updated for GF...data was kept correct ?
M8 tap'd
Click to expand...
Click to collapse
Appears to have kept the data yeah. I didn't have much on this phone anyway, but it didn't ask me to re-do setup or anything.
jimmyz80 said:
Appears to have kept the data yeah. I didn't have much on this phone anyway, but it didn't ask me to re-do setup or anything.
Click to expand...
Click to collapse
Nice...thank you...
M8 tap'd
I've ended up with DL'ing the odin file from another site....and all is well again
If anyone is looking for these I have them hosted on google drive. I can't post external links yet. send me a msg and i will send you the links.
Orignally I paid for them because I wanted to get rid of engboot (never even rooted) but to my surprise after flashing just the AP file I now have data toggle
Here is the link for the PK1 files
https://drive.google.com/open?id=0B0vffDY5Mf5sY1JpY3ViWlV1OVU
PM sent!
What are the files for? Just curious.. I've been out of the Android scene for a few..
Galaxy S7 PK files for ATT
Thank you for this
send this link to me!
I need it too.
Thanks!
QRhinehardt said:
If anyone is looking for these I have them hosted on google drive. I can't post external links yet. send me a msg and i will send you the links.
Orignally I paid for them because I wanted to get rid of engboot (never even rooted) but to my surprise after flashing just the AP file I now have data toggle
Click to expand...
Click to collapse
I would like them also.
Does anyone have these files that can post a link to them?
https://drive.google.com/drive/mobile/folders/0B0vffDY5Mf5sY1JpY3ViWlV1OVU?usp=drive_web
lowspeed said:
https://drive.google.com/drive/mobile/folders/0B0vffDY5Mf5sY1JpY3ViWlV1OVU?usp=drive_web
Click to expand...
Click to collapse
Which Odin version should I use to Flash this Stock PK1 firmware????
tailgunner9 said:
Which Odin version should I use to Flash this Stock PK1 firmware????
Click to expand...
Click to collapse
Stock odin 3.12 or 3.12.3 not Princecomsy.......Princecomsy is for engboot kernel only.
saf4xdadev said:
Stock odin 3.12 or 3.12.3 not Princecomsy.......Princecomsy is for engboot kernel only.
Click to expand...
Click to collapse
No December Security Update as yet from AT&T.
QRhinehardt said:
If anyone is looking for these I have them hosted on google drive. I can't post external links yet. send me a msg and i will send you the links.
Orignally I paid for them because I wanted to get rid of engboot (never even rooted) but to my surprise after flashing just the AP file I now have data toggle
Click to expand...
Click to collapse
Will downloading solve the OTA timing out at 25% or re-enabling of Volte (wi-fi calling?) Im currently on 6.0.1 At&t MMB29M. G930AUCS4AP12.
Get it son said:
Will downloading solve the OTA timing out at 25% or re-enabling of Volte (wi-fi calling?) Im currently on 6.0.1 At&t MMB29M. G930AUCS4AP12.
Click to expand...
Click to collapse
No.....because you will also need to odin stock pk1 onto your at&t phone in download mode before anything will change. After that, whatever features stock pk1 firmware has along with your phone contract is what you will have on your phone. So in the end, probably.
MMB29M. G930AUCS4APK1 is the Latest version we have gotten from AT&T OTA dated Nov. 1 and released Nov. 18, 2016
https://www.att.com/devicehowto/tut...tep_KM1127786?make=Samsung&model=SamsungG930A
Plox help
QRhinehardt said:
If anyone is looking for these I have them hosted on google drive. I can't post external links yet. send me a msg and i will send you the links.
Orignally I paid for them because I wanted to get rid of engboot (never even rooted) but to my surprise after flashing just the AP file I now have data toggle
Click to expand...
Click to collapse
I need the files too please!
TigerDuke said:
I need the files too please!
Click to expand...
Click to collapse
Go back to post 9 or 10 in this thread and there's a link posted by @lowspeed
http://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168/post70320130
tailgunner9 said:
Which Odin version should I use to Flash this Stock PK1 firmware????
Click to expand...
Click to collapse
Im assuming you should use Prince Comsey version. However I am not an expert. Dont take my advice seriously.
---------- Post added at 01:30 AM ---------- Previous post was at 01:24 AM ----------
saf4xdadev said:
Go back to post 9 or 10 in this thread and there's a link posted by @lowspeed
http://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168/post70320130
Click to expand...
Click to collapse
Even with these files I am receiving the
<ID:0/003> FAIL! Model dismatch fail
I dont know what to do anymore :|
TigerDuke said:
Im assuming you should use Prince Comsey version. However I am not an expert. Dont take my advice seriously.
---------- Post added at 01:30 AM ---------- Previous post was at 01:24 AM ----------
Even with these files I am receiving the
<ID:0/003> FAIL! Model dismatch fail
I dont know what to do anymore :|
Click to expand...
Click to collapse
Use the stock odin 3.12 or 3.12.3 when returning to stock......Princecomsy is only for engboot kernel.
Wow Im super smart
saf4xdadev said:
Use the stock odin 3.12 or 3.12.3 when returning to stock......Princecomsy is only for engboot kernel.
Click to expand...
Click to collapse
I have to say. I dont think i ever would have returned my phone to stock without your help sir.
It was becoming a pain in my ass to factory reset and re flash the root patch everytime my phone got stuck in a boot loop. ( which happened every week or so )
So thank you!
I need to install Android 6, but I can't seem to find a firmware upgrade that matches my version exactly.
What version is safe to use? I'm completely new to the android world, so I'm completely lost…
The closest I've found is a file named "Honor 5X_Firmware_KIW-L21_Android 6.0.1_EMUI 4.0_C432B330CUSTC432D001_Denmark.zip" but according to the PDF included in it I should only be used with versions:
KIW-L21C432B130CUSTC432D005
KIW-L21C432B130CUSTC432D006
KIW-L21C432B140
KIW-L21C432B300CUSTC432D002
Mine is kiw-l21c432b160.
Is it safe to use this one? Do you have any idea where I might find a suitable .zip if not?
Thanks for the help
nicocool84 said:
I need to install Android 6, but I can't seem to find a firmware upgrade that matches my version exactly.
What version is safe to use? I'm completely new to the android world, so I'm completely lost…
The closest I've found is a file named "Honor 5X_Firmware_KIW-L21_Android 6.0.1_EMUI 4.0_C432B330CUSTC432D001_Denmark.zip" but according to the PDF included in it I should only be used with versions:
KIW-L21C432B130CUSTC432D005
KIW-L21C432B130CUSTC432D006
KIW-L21C432B140
KIW-L21C432B300CUSTC432D002
Mine is kiw-l21c432b160.
Is it safe to use this one? Do you have any idea where I might find a suitable .zip if not?
Thanks for the help
Click to expand...
Click to collapse
What is cust version of you phone??
Did you try finding your firmware using firmware finder.?
I've given the full build number as it appears on the device (no CUSTxxx) suffix. Should I look somewhere else?
I'll check this firmware finder app once I have the opportunity.
nicocool84 said:
I've given the full build number as it appears on the device (no CUSTxxx) suffix. Should I look somewhere else?
I'll check this firmware finder app once I have the opportunity.
Click to expand...
Click to collapse
At bottom in about phone settings..cust version is written..
Oh right, silly me.
CUSTC432D001
nicocool84 said:
Oh right, silly me.
CUSTC432D001
Click to expand...
Click to collapse
Try firmware finder app from play store..
nicocool84 said:
Oh right, silly me.
CUSTC432D001
Click to expand...
Click to collapse
hwmt.ru can help
I have successfully downloaded a firmware using firmware finder.
When I go to Settings, update, local install, it is recognized and offers to install it. But then it boots to TWRP and fails to install. I guess I need to use the stock recovery? Any help appreciated...
And thanks!
nicocool84 said:
I have successfully downloaded a firmware using firmware finder.
When I go to Settings, update, local install, it is recognized and offers to install it. But then it boots to TWRP and fails to install. I guess I need to use the stock recovery? Any help appreciated...
And thanks!
Click to expand...
Click to collapse
Yes you need to to flash stock recovery...
Okay... So the closest I've found is this: https://androidfilehost.com/?w=files&flid=55194
But it's for B140, not B160. Apparently I have a very exotic model. Is it safe to flash or am I stuck here?
nicocool84 said:
Okay... So the closest I've found is this: https://androidfilehost.com/?w=files&flid=55194
But it's for B140, not B160. Apparently I have a very exotic model. Is it safe to flash or am I stuck here?
Click to expand...
Click to collapse
You said you want to upgrade to mm version..
This one is lollipop version...
hassanjavaid8181 said:
You said you want to upgrade to mm version..
This one is lollipop version...
Click to expand...
Click to collapse
Yes, now I'm starting to understand all these version numbers. My end goal is to install LineageOS, but I need MM first.
So now, I've switched back to Huawei eRecovery instead of TWRP, and tried two different firmwares (before B360 because apparently it prevents installing LineageOS), that were "validated with my IMEI". Settings>Update>Local>Reboot, installation starts I'm about to cry tears of joy and then around 15%, installation fails with no further details. I can then shutdown and reboot to my good ol' lollipop. Not sure what to do next...
nicocool84 said:
Yes, now I'm starting to understand all these version numbers. My end goal is to install LineageOS, but I need MM first.
So now, I've switched back to Huawei eRecovery instead of TWRP, and tried two different firmwares (before B360 because apparently it prevents installing LineageOS), that were "validated with my IMEI". Settings>Update>Local>Reboot, installation starts I'm about to cry tears of joy and then around 15%, installation fails with no further details. I can then shutdown and reboot to my good ol' lollipop. Not sure what to do next...
Click to expand...
Click to collapse
May be the package wasn't right...
You can go to old lollipop firmware??
You will have to download complete firmware file not the ota file..
Extract stock recovery from that firmware..put update.app in dload foler and flash via force upgrade....
You have region variant you have??
You have us variant!?
---------- Post added at 11:40 AM ---------- Previous post was at 11:33 AM ----------
http://www.stechguide.com/honor-5x-stock-marshmallow-firmware/
Download that firmware...
hassanjavaid8181 said:
May be the package wasn't right...
You can go to old lollipop firmware??
You will have to download complete firmware file not the ota file..
Extract stock recovery from that firmware..put update.app in dload foler and flash via force upgrade....
You have region variant you have??
You have us variant!?
---------- Post added at 11:40 AM ---------- Previous post was at 11:33 AM ----------
http://www.stechguide.com/honor-5x-stock-marshmallow-firmware/
Download that firmware...
Click to expand...
Click to collapse
I still have the same lollipop firmware my device was bought with. I don't think I have US variant. I brought it from (Amazon France)[https://www.amazon.fr/Honor-5X-Smar...d=1508409802&sr=8-2&keywords=huawei+honor+5x] and I am in France. The product title says it is unlocked but I had to do it myself.
I'll try your link as soon as I receive my SD card, because apparently it is required for this method. I still have this file from an older download, but was scared because a PDF file included in it mentioned it should be used with B140 and did not mention B160, but now that I've flashed a stock recovery meant for B140, this doesn't scare me anymore.
Thank you very much for taking the time to help a noob FOSS-enthusiast!
nicocool84 said:
I still have the same lollipop firmware my device was bought with. I don't think I have US variant. I brought it from (Amazon France)[https://www.amazon.fr/Honor-5X-Smar...d=1508409802&sr=8-2&keywords=huawei+honor+5x] and I am in France. The product title says it is unlocked but I had to do it myself.
I'll try your link as soon as I receive my SD card, because apparently it is required for this method. I still have this file from an older download, but was scared because a PDF file included in it mentioned it should be used with B140 and did not mention B160, but now that I've flashed a stock recovery meant for B140, this doesn't scare me anymore.
Thank you very much for taking the time to help a noob FOSS-enthusiast!
Click to expand...
Click to collapse
I will upgrade doesn't matter you are on 140 or 160...
Good luck.:good:
Hello to all professionals on this site. I have a question. I just got an ATT S9+ and unlocked by ATT unlock code. I'm currently using T-mobile USA sim. I would like to know how to do a firmware switch? Can I switch to unlocked firmware or I need to flash to T-mobile USA firmware? is there any detail step by step tutorial for flashing? I dont want to brick my phone.
vincentli119 said:
Hello to all professionals on this site. I have a question. I just got an ATT S9+ and unlocked by ATT unlock code. I'm currently using T-mobile USA sim. I would like to know how to do a firmware switch? Can I switch to unlocked firmware or I need to flash to T-mobile USA firmware? is there any detail step by step tutorial for flashing? I dont want to brick my phone.
Click to expand...
Click to collapse
What firmware you on?
kevindevonwilliams said:
What firmware you on?
Click to expand...
Click to collapse
I'm now on original ATT firmware.
vincentli119 said:
I'm now on original ATT firmware.
Click to expand...
Click to collapse
What is your CSC code that is displayed in software information where it says Service provider info
I'm trying to the same thing. Hasn't worked for me yet. I had successful flash according to Odin and my firmware is reflected in setting however i still have att boot/bloat. I flashed tmb user data as well using patched Odin and I'm currently showing I'm on 2rc6 firmware but i think I'm sick on it because of bootloader v2 and can't flash any v1 firmware now...
Any ideas how to complete and swap my user data over to T-Mobile? Thanks
kevindevonwilliams said:
What is your CSC code that is displayed in software information where it says Service provider info
Click to expand...
Click to collapse
I'm sorry I dont know what you are talking about. Can you guide me how to check it?
vincentli119 said:
I'm sorry I dont know what you are talking about. Can you guide me how to check it?
Click to expand...
Click to collapse
Settings > about phone > software information.
You would see Service provider SW ver. with some information like ATT/TMB/ATT
---------- Post added at 02:32 AM ---------- Previous post was at 02:31 AM ----------
dannyHD2 said:
I'm trying to the same thing. Hasn't worked for me yet. I had successful flash according to Odin and my firmware is reflected in setting however i still have att boot/bloat. I flashed tmb user data as well using patched Odin and I'm currently showing I'm on 2rc6 firmware but i think I'm sick on it because of bootloader v2 and can't flash any v1 firmware now...
Any ideas how to complete and swap my user data over to T-Mobile? Thanks
Click to expand...
Click to collapse
Flash the U1 firmware, set up device without account.
Then flash T-Mobile U firmware including userdata with T-Mobile SIM inserted
kevindevonwilliams said:
Settings > about phone > software information.
You would see Service provider SW ver. with some information like ATT/TMB/ATT
---------- Post added at 02:32 AM ---------- Previous post was at 02:31 AM ----------
Flash the U1 firmware, set up device without account.
Then flash T-Mobile U firmware including userdata with T-Mobile SIM inserted
Click to expand...
Click to collapse
I have frp off but it's setup. Should i factory reset before trying to flash to u1 or does it not matter? I tried rb7 but it failed. Also i noticed while trying to flash it didn't load ap very well. Normally it freezes for a sec while verifying but it instantly added. Maybe a bad download? I'm downloading rbg now which is an md5 so maybe that was an issue before because the rb7 wasn't. I'll see if that works. Just a lil worried about going to a version 1 bootloader from version 2 as i read that wasn't possible. Hoping for the best. Thanks for the help
---------- Post added 24-04-2018 at 12:32 AM ---------- Previous post was 23-04-2018 at 11:33 PM ----------
Flashing u1 roms aren't working. Tried several times with different cables etc... Odin fail, (auth) complete write fail. I think I'm stuck til this gets a real solution or unlocked rom gets bootloader v2 or becomes unlockable then maybe it'll work? If anyone comes up with a solution please post. Thanks
dannyHD2 said:
I have frp off but it's setup. Should i factory reset before trying to flash to u1 or does it not matter? I tried rb7 but it failed. Also i noticed while trying to flash it didn't load ap very well. Normally it freezes for a sec while verifying but it instantly added. Maybe a bad download? I'm downloading rbg now which is an md5 so maybe that was an issue before because the rb7 wasn't. I'll see if that works. Just a lil worried about going to a version 1 bootloader from version 2 as i read that wasn't possible. Hoping for the best. Thanks for the help
---------- Post added 24-04-2018 at 12:32 AM ---------- Previous post was 23-04-2018 at 11:33 PM ----------
Flashing u1 roms aren't working. Tried several times with different cables etc... Odin fail, (auth) complete write fail. I think I'm stuck til this gets a real solution or unlocked rom gets bootloader v2 or becomes unlockable then maybe it'll work? If anyone comes up with a solution please post. Thanks
Click to expand...
Click to collapse
Oh you on V2 bootloader, well you are stuck on it because U1 is on V1. Currently only T-Mobile and AT&T have V2 firmware out so you can try flashing in between.
Am on U firmware 2ARD3 but am pure stock without carrier bloatware.
What are you trying to achieve with the T-Mobile userdata?
kevindevonwilliams said:
Oh you on V2 bootloader, well you are stuck on it because U1 is on V1. Currently only T-Mobile and AT&T have V2 firmware out so you can try flashing in between.
Am on U firmware 2ARD3 but am pure stock without carrier bloatware.
What are you trying to achieve with the T-Mobile userdata?
Click to expand...
Click to collapse
I have the same question as OP. What would I accomplish by flashing the T-Mobile V2 U firmware as opposed to the most recent U1? Is there anything I can't manually enable while staying on unlocked? I don't want to go to the V2 bootloader if I don't have to for the time being, at least until we see an unlocked V2 version.
theredspecial said:
I have the same question as OP. What would I accomplish by flashing the T-Mobile V2 U firmware as opposed to the most recent U1? Is there anything I can't manually enable while staying on unlocked? I don't want to go to the V2 bootloader if I don't have to for the time being, at least until we see an unlocked V2 version.
Click to expand...
Click to collapse
The U1 is pure stock, I personally would stay on it..
The carrier U firmware are just full of bloatware and also contains the userdata for that specific carrier so that some features work properly like voice over LTE etc. If that doesn't bother you then stay on your version because there isn't any V2 bootloader for the U1 firmware
kevindevonwilliams said:
The U1 is pure stock, I personally would stay on it..
The carrier U firmware are just full of bloatware and also contains the userdata for that specific carrier so that some features work properly like voice over LTE etc. If that doesn't bother you then stay on your version because there isn't any V2 bootloader for the U1 firmware
Click to expand...
Click to collapse
I definitely want those features, is there a way to enable them while on U1? I don't want bloat, but to my understand T-Mobile's bloat isn't too bad.
theredspecial said:
I definitely want those features, is there a way to enable them while on U1? I don't want bloat, but to my understand T-Mobile's bloat isn't too bad.
Click to expand...
Click to collapse
Well you can flash the T-Mobile userdata file from the U firmware onto your U1 and get the features. As to the bloatware you can disable most of them with bk package disabler :fingers-crossed:
kevindevonwilliams said:
Well you can flash the T-Mobile userdata file from the U firmware onto your U1 and get the features. As to the bloatware you can disable most of them with bk package disabler :fingers-crossed:
Click to expand...
Click to collapse
The userdata from the latest one with the V2 bootloader? And then the U1 RB7?
theredspecial said:
The userdata from the latest one with the V2 bootloader? And then the U1 RB7?
Click to expand...
Click to collapse
Well I assume you already running the U1 firmware, so you only need to flash the userdata from the U firmware.
Use the userdata from the V1 firmware for T-Mobile, use modded Odin and flash the userdata and you should have T-Mobile features :good:
kevindevonwilliams said:
Well I assume you already running the U1 firmware, so you only need to flash the userdata from the U firmware.
Use the userdata from the V1 firmware for T-Mobile, use modded Odin and flash the userdata and you should have T-Mobile features :good:
Click to expand...
Click to collapse
I'll give that a try. I might just say the hell with it and go full T-Mobile. I assume the next U1 will be on the V2 bootloader.
theredspecial said:
I'll give that a try. I might just say the hell with it and go full T-Mobile. I assume the next U1 will be on the V2 bootloader.
Click to expand...
Click to collapse
Lol the U1 are the last to get updates.
Currently the U firmware is on April patch while the U1 is still on February patch
kevindevonwilliams said:
Settings > about phone > software information.
You would see Service provider SW ver. with some information like ATT/TMB/ATT
---------- Post added at 02:32 AM ---------- Previous post was at 02:31 AM ----------
Flash the U1 firmware, set up device without account.
Then flash T-Mobile U firmware including userdata with T-Mobile SIM inserted
Click to expand...
Click to collapse
my SW ver:
SAOMC_SM-G965U_OYN_ATT_OO_0071
XXXXXXXXXXXXXX
ATT/ATT/ATT
kevindevonwilliams said:
Oh you on V2 bootloader, well you are stuck on it because U1 is on V1. Currently only T-Mobile and AT&T have V2 firmware out so you can try flashing in between.
Am on U firmware 2ARD3 but am pure stock without carrier bloatware.
What are you trying to achieve with the T-Mobile userdata?
Click to expand...
Click to collapse
I'm a T-Mobile post paid with unlimited everything but mainly wifi calling in areas where reception isn't great is pretty important. Also would like direct video, HD vice, and especially VoLte working. Since all the carrier software is in the user data I just want to have the T-Mobile in place of the att. Phone works well otherwise and I can live with it the way it is for a bit til it gets sorted out. But hopefully there will be an unlocked v2 firmware soon that will flash. Or bootloader unlock!
vincentli119 said:
my SW ver:
SAOMC_SM-G965U_OYN_ATT_OO_0071
XXXXXXXXXXXXXX
ATT/ATT/ATT
Click to expand...
Click to collapse
You did not flash the T-Mobile firmware including the CSC and userdata because your device suppose to say TMB/TMB/ATT
---------- Post added at 11:03 AM ---------- Previous post was at 11:02 AM ----------
dannyHD2 said:
I'm a T-Mobile post paid with unlimited everything but mainly wifi calling in areas where reception isn't great is pretty important. Also would like direct video, HD vice, and especially VoLte working. Since all the carrier software is in the user data I just want to have the T-Mobile in place of the att. Phone works well otherwise and I can live with it the way it is for a bit til it gets sorted out. But hopefully there will be an unlocked v2 firmware soon that will flash. Or bootloader unlock!
Click to expand...
Click to collapse
U1 generally be the last to get updates
FOR A6+ (A605FN)
1-Unlock your OEM & activate USB debugging on Developers Options.
2-Restart on Dowload Mode & Flash the 4 firmware files with Odin.
3-Instal Magisk.apk & SuperUser will be working for delete bloatware,modify the system & install apps that require superuser permissions.
A605FNXXU2ARG2 - DOWNLOAD
Magisk Manager - DOWNLOAD
THANKS TO MAGISK FOR THE NEW ROOT METHOD WITHOUT RECOVERY
If I have helped you, invite me to a beer by clicking HERE.
Will safetynet check work?
DKzVeNgEnS said:
Will safetynet check work?
Click to expand...
Click to collapse
For now we have to choose between having root or pass the Safetynet.
Do not sew odin, mistake
kes228 said:
Do not sew odin, mistake
Click to expand...
Click to collapse
It is compressed in ZIP,
First you have to extract the 4 files.
It is also important not to rename the files.
josemaesra said:
It is compressed in ZIP,
First you have to extract the 4 files.
It is also important not to rename the files.
Click to expand...
Click to collapse
I pulled out 4 archives, I put one does not sew,On the body it says that the current is official, the bootloader is unlocked everywhere stand OFF http://prntscr.com/knd460
kes228 said:
I pulled out 4 archives, I put one does not sew,On the body it says that the current is official, the bootloader is unlocked everywhere stand OFF http://prntscr.com/knd460
Click to expand...
Click to collapse
Try with this ODIN,
& say me if working,please,
thanks.
josemaesra said:
Try with this ODIN,
& say me if working,please,
thanks.
Click to expand...
Click to collapse
Also does not sew ( http://prntscr.com/kndfnb
kes228 said:
Also does not sew ( http://prntscr.com/kndfnb
Click to expand...
Click to collapse
If possible, send me your official boot.img and I can patch it in 5min.
josemaesra said:
If possible, send me your official boot.img and I can patch it in 5min.
Click to expand...
Click to collapse
I will grateful to you https://drive.google.com/open?id=1lbou9k_VvraEwKMuyqn57bBg1kP4LxMc
kes228 said:
I will grateful to you https://drive.google.com/open?id=1lbou9k_VvraEwKMuyqn57bBg1kP4LxMc
Click to expand...
Click to collapse
This is you patchet boot.img - Download
[/COLOR]
josemaesra said:
This is you patchet boot.img - Download
Click to expand...
Click to collapse
Do not sew, nothing is written on the phone http://prntscr.com/kndrvh
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
josemaesra said:
This is you patchet boot.img - Download
Click to expand...
Click to collapse
Can I flash your firmware? with your region?
Here is my worth
http://cs5-3.4pda.to/13690992/Scree...Settings.jpg?c9a72894c1607654b646c19c7ce6be4e
kes228 said:
[/COLOR]
Do not sew, nothing is written on the phone http://prntscr.com/kndrvh
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
Can I flash your firmware? with your region?
Here is my worth
http://cs5-3.4pda.to/13690992/Scree...Settings.jpg?c9a72894c1607654b646c19c7ce6be4e
Click to expand...
Click to collapse
I do not know what that error is due to,
but the solution is to flash your official firmware and then flash your patched boot.img,
this patched boot.img can not return error since it is the one corresponding to your official firmware.
josemaesra said:
I do not know what that error is due to,
but the solution is to flash your official firmware and then flash your patched boot.img,
this patched boot.img can not return error since it is the one corresponding to your official firmware.
Click to expand...
Click to collapse
It is a pity that it does not work out
kes228 said:
It is a pity that it does not work out
Click to expand...
Click to collapse
I tried flashing your boot.img and I get `` device not supported '',
so the boot.img is different for each region and firmware.
What is your region? And firmware, I'll try)
kes228 said:
What is your region? And firmware, I'll try)
Click to expand...
Click to collapse
My firm is A605FNXXU2ARG2 and my region is PHE
josemaesra said:
My firm is A605FNXXU2ARG2 and my region is PHE
Click to expand...
Click to collapse
Thank you, and can your patched boot from your firmware if everything gets done, I'll sign you off
Guys, I need help! I got a demo unit a605x. On joys stitched through one official firmware for Russia. Everything went without errors, but when you restart and further installation does not give the modem and the inscription in English, they say, contact the operator. After reading the forum I can not understand what I did wrong? I understood that it was necessary to sew without a file of the CP (responsible for the modem)? And another point, does the process of firmware OEM option lock: on/off? Or he is affected with the unofficial firmware? I didn't change it, maybe that's the problem. What I just did not put the firmware, all by. Maybe there are bright heads here? Thanks in advance!
josemaesra said:
If possible, send me your official boot.img and I can patch it in 5min.
Click to expand...
Click to collapse
when @kes228 already failed, and then Odin patched given but still error, the date still 27. maybe his cellphone already in RMM prenormal condition..