Hello,
i'm really confused between Caseology Vault II and Vault I
what is the deference and what is the more protection between them?
which one to get after all for my S8 ?
I believe Vault I is for Galaxy S8 and Vault II is for Galaxy S8+.
I just recently got a vault ii for the s8+ free through a giveaway and my buddy got the vault I for his s8 the vault I has a piece of harder plastic in the middle with a brushed metal feel and around the fingerprint scanner there is a harder piece of plastic with a carbon fiber design. The vault ii is entirely tpu so it's minimal protection but it feels really nice and slim
ac16313 said:
I just recently got a vault ii for the s8+ free through a giveaway and my buddy got the vault I for his s8 the vault I has a piece of harder plastic in the middle with a brushed metal feel and around the fingerprint scanner there is a harder piece of plastic with a carbon fiber design. The vault ii is entirely tpu so it's minimal protection but it feels really nice and slim
Click to expand...
Click to collapse
So, vault i is more drop protection?
MamomaN said:
So, vault i is more drop protection?
Click to expand...
Click to collapse
Yeah I'd say . The vault ii is straight up just tpu.
ac16313 said:
Yeah I'd say . The vault ii is straight up just tpu.
Click to expand...
Click to collapse
Isn't both of them the same materials exactly?
It's more confusing now
MamomaN said:
Isn't both of them the same materials exactly?
It's more confusing now
Click to expand...
Click to collapse
Sorry yeah they're both ypu but the vault I has a harder plastic around the majority of the back and the edges seem thicker
jackfrost3821 said:
I believe Vault I is for Galaxy S8 and Vault II is for Galaxy S8+.
Click to expand...
Click to collapse
No.
---------- Post added at 09:41 PM ---------- Previous post was at 09:37 PM ----------
ac16313 said:
Sorry yeah they're both ypu but the vault I has a harder plastic around the majority of the back and the edges seem thicker
Click to expand...
Click to collapse
Nah. They're both made out of flexible tpu, so the hardness is the same for both. There is no hard plastic. The Vault 1 does seem to have thicker corners.
Nice question
MamomaN said:
Hello,
i'm really confused between Caseology Vault II and Vault I
what is the deference and what is the more protection between them?
which one to get after all for my S8 ?
Click to expand...
Click to collapse
Nice question
Dr. Fed said:
...
Nah. They're both made out of flexible tpu, so the hardness is the same for both. There is no hard plastic. The Vault 1 does seem to have thicker corners.
Click to expand...
Click to collapse
Nah. The vault I has polycarbonate center and tpu around the edges. The vault ii is ONLY tpu. You could try reading their website before attempting to correct someone.
ac16313 said:
Nah. The vault I has polycarbonate center and tpu around the edges. The vault ii is ONLY tpu. You could try reading their website before attempting to correct someone.
Click to expand...
Click to collapse
Nah. I don't believe that, and here's why. I've done my research. Caseology describes the case in some of their listings as full TPU, and in other listings as TPU and polycarbonate. They've contradicted themselves. However, they consistently describe it as fully flexible, and even have illustrations showing it as such. The case should not be able to bend so much if it really had a polycarbonate center. (Your description sounds more like their Legion case). Therefore, it is very likely that the TPU/PC description is an error (some of their other cases are TPU/PC, maybe they made a cut and paste mistake). I've seen some good videos on the case, none of them show any polycarbonate on this case.
Websites don't always have 100% accurate information. Maybe I'll just buy the case, since it's only $10 bucks, and report back. Or perhaps someone that owns the case could tell us if it has any PC parts.
I have the Vault 1 and can confirm it's fully flexible with thicker corners, there is no hard plastic. To be honest, it doesn't even feel that nice. Not enough grip for my liking. I also have the Legion, which does have a Plastic back with a coating that adds grip. The shape also helps with grip. The Legion is the best case in my opinion of all the ones I have from Spigen, Ringke and Caseology line, it also helps that I got it for $5.
Kambuja said:
I have the Vault 1 and can confirm it's fully flexible with thicker corners, there is no hard plastic. To be honest, it doesn't even feel that nice. Not enough grip for my liking. I also have the Legion, which does have a Plastic back with a coating that adds grip. The shape also helps with grip. The Legion is the best case in my opinion of all the ones I have from Spigen, Ringke and Caseology line, it also helps that I got it for $5.
Click to expand...
Click to collapse
Thanks. What color Legion case do you have? Just wondering if the color affects the grip (sometimes SF coatings are only on dark colors).
Dr. Fed said:
Thanks. What color Legion case do you have? Just wondering if the color affects the grip (sometimes SF coatings are only on dark colors).
Click to expand...
Click to collapse
I have the Black one.
ac16313 said:
Nah. The vault I has polycarbonate center and tpu around the edges. The vault ii is ONLY tpu. You could try reading their website before attempting to correct someone.
Click to expand...
Click to collapse
You were saying? Care for a retraction?
Dr. Fed said:
You were saying? Care for a retraction?
Click to expand...
Click to collapse
No way. You're wrong I'm right even when I'm wrong I'm right. Ok nah yeah I guess I was wrong.
ac16313 said:
No way. You're wrong I'm right even when I'm wrong I'm right. Ok nah yeah I guess I was wrong.
Click to expand...
Click to collapse
Funny ?
Kambuja said:
I have the Vault 1 and can confirm it's fully flexible with thicker corners, there is no hard plastic. To be honest, it doesn't even feel that nice. Not enough grip for my liking. I also have the Legion, which does have a Plastic back with a coating that adds grip. The shape also helps with grip. The Legion is the best case in my opinion of all the ones I have from Spigen, Ringke and Caseology line, it also helps that I got it for $5.
Click to expand...
Click to collapse
Any chance you have the Spigen Tough Armor, and if you do, how does it compare to the Caseology Legion?
Thanks everyone,
i already got the Vault 1 and returned it after just One day because it damaged my glass screen protector
i ordered the Gaseology fermont case instead and i will receive it soon, it looks more glass screen friendly
Related
As the tile asks.
Was going for the Neo Hybrid, but saw on YouTube videos that it adds a significant amount of bulk to the phone, also in dimensions, and it's not that sturdy anyway!
So I need a lightweight case, which will protect the phone, should have a decent amount of lip at front to protect the screen, and the case itself should not be fragile. I find it meaningless when a case requires not to be dropped. I am scared about dropping the phone, that's why I need a case at first place
I personally love UAG cases, but I don't like the hardcore industrialist look on them any more, I need something very simple yet elegant looking, like the Neo Hybrid.
Thanks.
Look at the UAG. Its pretty lightweight but may be more bulky than what you are looking for
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
1slow4G said:
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
Click to expand...
Click to collapse
This is not available in my location.
SilentJ20 said:
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
Click to expand...
Click to collapse
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
devilsdouble said:
This is not available in my location.
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
Click to expand...
Click to collapse
I also have the bearmotion bumper. Really love that bumper.
1slow4G said:
I also have the bearmotion bumper. Really love that bumper.
Click to expand...
Click to collapse
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
devilsdouble said:
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
Click to expand...
Click to collapse
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
1slow4G said:
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
Click to expand...
Click to collapse
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
devilsdouble said:
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
Click to expand...
Click to collapse
Yes it does. That's the temperature/humidity sensor btw
Have you looked at Otterbox?
ShadowLea said:
Have you looked at Otterbox?
Click to expand...
Click to collapse
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Right now the only option for me is to get a bumper, and in bumpers I can only have two, that Bear Motion one as suggested on previous page or some Amzer one, called Border Case or something, but I have no idea if that case has that cutout for the temperature sensor! Has anyone ever heard of this brand Amzer before? I certainly haven't! This is the case I am taking about,
http://www.amzer.co.in/Amzer-Border-Case-Black-P97313.htm
If that case doesn't have the cutout then my only option is to go for the Bear Motion one, but I don't think paying 2X price than what it's worth is reasonable by any means.
Lets see.
devilsdouble said:
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Click to expand...
Click to collapse
I've got the Commuter. It's a lot more elegant in reality than it looks in the pictures. (At least the black one is). But yes, it's a but bulky. It doubles the thickness if you count the rim on the front as well.
But if you want protection, something slim and sleek will not do much good. I've looked for those options, but they're all more for show than actual protection.
The diztronic tpu might be what you're looking for. Uag, spigen or especially otterbox are far from lightweight. I own the uag and I can drop the phone on any kind of surface without blinking, that case has serious protection. Otterbox is a tank, for construction people.
Yeah thanks guys.
@ShadowLea: Yeah I know that a bumper will not protect the device like an Otterbox would do or a UAG, but I am not looking for that much protection, just protecting the corners will do fine in my case, I think.
@lvnatic: Thanks. I know about UAG and Otterbox. I have used the Maverick on my S4 for a good four/five months, and it can protect the device in a lot of situations, but then I got tired of its look, too rugged, and that too when S4's backside was all glossy cheap type of plastic. For Note 3 and its backside material I can't think slapping a case on it, I just love touching that fake plastic It feels too good. If it were Note 2 or S4, I would not think a second before putting a case on it, because they felt that gross, to me.
Anyway, thanks all for the suggestions. For the time being I am going with a bumper, if I change my mind and consider a more protective case later then I will surely consider the suggested cases in this topic.
Does anybody know of a case that'll work with Samsung's wireless charging battery panel?
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
djak272 said:
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
Click to expand...
Click to collapse
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
1slow4G said:
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
Click to expand...
Click to collapse
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
djak272 said:
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
Click to expand...
Click to collapse
Figured that was the case (see what I did there ?)
I'll give it a try then, the looks are deceiving lol
What color you have? I'm stuck between slate and sliver
I've been interested in having skins on my phones, but I've never had a phone popular enough for companies to produce skins for them.
The HAM2 is no different, but I just found this carbon fiber-looking skin, which, as far as I can tell, is one of the few skins out there for the HAM2. Does anyone here have it, or experience with skins? Are they more protective than cases? Are they grippy or still slippery? I assume the "military grade" and "self-healing" stuff is utter BS? The case I have now is a Nillkin slim case.
Edit: Can't seem to get the link to work for some reason... just search "ArmorSuit MilitaryShield - Huawei Ascend Mate 2"
ScoobSTi said:
I've been interested in having skins on my phones, but I've never had a phone popular enough for companies to produce skins for them.
The HAM2 is no different, but I just found this carbon fiber-looking skin, which, as far as I can tell, is one of the few skins out there for the HAM2. Does anyone here have it, or experience with skins? Are they more protective than cases? Are they grippy or still slippery? I assume the "military grade" and "self-healing" stuff is utter BS? The case I have now is a Nillkin slim case.
Edit: Can't seem to get the link to work for some reason... just search "ArmorSuit MilitaryShield - Huawei Ascend Mate 2"
Click to expand...
Click to collapse
I have that installed on my ipad. Looks pretty cool and would protect from scratches. Does nothing to protect from drop damage etc. Its got some texture to it so it makes it easier to grip. Three year old is watching videos on it right now. When he's done I will post a pic of it.
Well there is a crappy pic for now. Lol I have never taken it off so I don't know of it leaves a mess on the device after removal. But it has taken more than its share of abuse and is still in tact. No holes or wear and tear. And that's after three years of use. Btw the dark spot you see is water.... As my son had spilled some on the table evidently.. Lol
Here is an angle shot so you can see the texture.
Moody66 said:
Here is an angle shot so you can see the texture.
Click to expand...
Click to collapse
Awesome, thanks. I might get it then lol. It looks nice! [emoji1]
Sent from my Ascend Mate 2 using Tapatalk
Good reviews on Amazon and one reviewer wrote that it's a kevlar sticker, and they use it with a case. You planning to use a case or not?
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacement/dp/B00MRQIXEU
ScoobSTi said:
Awesome, thanks. I might get it then lol. It looks nice! [emoji1]
Sent from my Ascend Mate 2 using Tapatalk
Click to expand...
Click to collapse
Use a hair dryer on it when you apply it. Makes it a little softer so it fits better. They ate really stiff. If ya don't heat it a little it will try to flatten out and pull off the edges. I pit few on HP touchpads a couple years ago. Was a pain to get it to lay down. Heat applied and it was smooth as butter.
As you can see on the touchpad it fits nicely around the USB port. Wouldn't until it was heated.
Installation video:
[http://m.youtube.com/watch?v=vbwPpvvFqCE] [ArmorSuit Carbon Fiber Shield Installation Instructions for Cell Phones - YouTube] is good,have a look at it!
divineBliss said:
Good reviews on Amazon and one reviewer wrote that it's a kevlar sticker, and they use it with a case. You planning to use a case or not?
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacement/dp/B00MRQIXEU
Click to expand...
Click to collapse
If I get it I'll decide when I apply it.
Moody66 said:
Use a hair dryer on it when you apply it. Makes it a little softer so it fits better. They ate really stiff. If ya don't heat it a little it will try to flatten out and pull off the edges. I pit few on HP touchpads a couple years ago. Was a pain to get it to lay down. Heat applied and it was smooth as butter.
Click to expand...
Click to collapse
Moody66 said:
As you can see on the touchpad it fits nicely around the USB port. Wouldn't until it was heated.
Click to expand...
Click to collapse
divineBliss said:
Installation video:
[http://m.youtube.com/watch?v=vbwPpvvFqCE] [ArmorSuit Carbon Fiber Shield Installation Instructions for Cell Phones - YouTube] is good,have a look at it!
Click to expand...
Click to collapse
Thanks! :good:
I doubt any case will work if you use the shield. Its very thick. That's why the iPad and touchpad are not in cases. It adds a surprising amount of bulk. I know it will not work with the trident at all. Nor the gell cases. Matter of fact the trident case wouldn't even let it start to slide in. It's designed to be a stand alone protection. But there isn't any real use in putting this on then a case over the top of it anyway.
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Not
divineBliss said:
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Click to expand...
Click to collapse
Not many cases available for these ham2s. Used one on an iPhone and went through 7 cases before I could find one that fit. And it was a soft rubber one that would stretch. Crapola made. Company is always going to tell u cases may fit. Lol they want to sell product. When the wife gets home i will show a picture of hers with a case attempt... Not a pretty site.
TPU for HAM2 by Mooncase from Amazon fits perfectly. $5.99 shipped from China or Amazon prime. Read the reviews and stay away from crappie stuff.
If it fits good now it won't with armour on it... Been there done that.
divineBliss said:
If a clear TPU case fit, then you could still partially see the carbon fiber and reviewer on Amazon implied using with a case.
If you do get it and have a way of measuring the thickness of the skin, let us know. Otherwise measure case before/after skin .
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
From their website:
http://www.armorsuit.com/need-help#f9
Can I use MilitaryShield on a device that fits within a case?
MilitaryShield is ultra-thin and measures under 1 mm thick. It should be compatible with most cases, but it's also possible that the combination will not fit. That's why we offer the case friendly version for our screen protectors, which is slightly smaller along the edges. Check with your case manufacturer for compatibility.
Click to expand...
Click to collapse
Moody66 said:
If it fits good now it won't with armour on it... Been there done that.
Click to expand...
Click to collapse
Order placed, should be here a week from today. It'd be quite redundant to have the skin on and a case on as well, so I might go with just the skin if it's grippy enough. Will definitely post pics and a small review or something.
Skin came in a few days early. :good: Was annoying to put on the edges but here are some pics.
I messed up around the USB port lol.
Looks nice. What was annoying about the edges? Lining the skin up straight or the skin not sticking? Feel thick? Can you drop the phone now and it will bounce :lol: .
divineBliss said:
Looks nice. What was annoying about the edges? Lining the skin up straight or the skin not sticking? Feel thick? Can you drop the phone now and it will bounce :lol: .
Click to expand...
Click to collapse
Lining up the edges was a pain. The instruction video made it look like a walk in the park lol. Thickness isn't much of a problem, I put my case back on to see if it would fit and it does. I'm not too convinced about dropping the phone though lol.
ScoobSTi said:
Lining up the edges was a pain. The instruction video made it look like a walk in the park lol. Thickness isn't much of a problem, I put my case back on to see if it would fit and it does. I'm not too convinced about dropping the phone though lol.
Click to expand...
Click to collapse
Funny how those videos make everything look easy.
What kind of case was it that you put it back in for fit? Cyclops, TPU, hard back shield, something else?
Have you ever put on a glass screen protector - if so how was it? I have some on order - hope they go on as easy as the video makes them look :lol: ?
divineBliss said:
Funny how those videos make everything look easy.
What kind of case was it that you put it back in for fit? Cyclops, TPU, hard back shield, something else?
Have you ever put on a glass screen protector - if so how was it? I have some on order - hope they go on as easy as the video makes them look :lol: ?
Click to expand...
Click to collapse
Just a hard back shell. I doubt the Cyclops would fit.
I always wanted to get a tempered glass screen protector but I didn't. Next time lol. Not sure, but I think @superbass311 said he had one?
I want to buy a case for my s3. I am using Urban Armor Gear case for now but it makes my phone a lil bit thick. Can you recommend a good protective case?
acemogluahmet said:
I want to buy a case for my s3. I am using Urban Armor Gear case for now but it makes my phone a lil bit thick. Can you recommend a good protective case?
Click to expand...
Click to collapse
What type do you need?
Transparent or colored TPU gels?
Search eBay. You can find lots of different cases.
msat59 said:
What type do you need?
Transparent or colored TPU gels?
Search eBay. You can find lots of different cases.
Click to expand...
Click to collapse
I am lookin for protection but little weight. In ebay everybody says their cases are very protective. Most of all lie. So i need experienced users. No matter what type is it...
acemogluahmet said:
I am lookin for protection but little weight. In ebay everybody says their cases are very protective. Most of all lie. So i need experienced users. No matter what type is it...
Click to expand...
Click to collapse
If you mean protection from scratches, any TPU gel case is good.
I have bought this one.
http://www.ebay.com/itm/Transparent...hash=item4d339321db:m:mlMmzxGypfVuz8E6a1cHtnQ
After few month, it become a little bit yellowish, but it's still fine.
In addition, you can buy a tempered glass LCD protector to make your screen scratch proof.
http://www.ebay.com/itm/262214399856?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I am using this one for more than six months. It's perfect.
msat59 said:
If you mean protection from scratches, any TPU gel case is good.
I have bought this one.
http://www.ebay.com/itm/Transparent...hash=item4d339321db:m:mlMmzxGypfVuz8E6a1cHtnQ
After few month, it become a little bit yellowish, but it's still fine.
In addition, you can buy a tempered glass LCD protector to make your screen scratch proof.
http://www.ebay.com/itm/262214399856?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I am using this one for more than six months. It's perfect.
Click to expand...
Click to collapse
Thanks for recommend
So I've tried in excess of 10 cases for my S8. The fact that I bought them on Amazon made the process long and tedious. I've tried 4 from Spigen and several no name brands. The latest one I've tried is the official sillicone case. It's great but too sticky and any dust or lint sticks to it solidly.
When I had an S7 I had a case I absolutely loved, this one:
https://www.amazon.ca/gp/product/B0...ge_o01_s00?ie=UTF8&psc=1&tag=androidcent08-20
Unfortunately, they don't make it for the S8 (yet they do for the Note 8 which is frustrating).
Anyhow, does anyone which case can be the equivalent of the one above? I want a hard-ish case, with at least the bottom uncovered but ideally the buttons as well, rubberized back and dark if not black. That's it.
Thanks!
https://www.amazon.com/gp/product/B06Y98H8C7
joe3681 said:
https://www.amazon.com/gp/product/B06Y98H8C7
Click to expand...
Click to collapse
Oh that does look like a good one. Have you used it? If that point design is not rubbery but rather plastic it's going to be annoying to hold. Plus that lack of a slight lip on front worries me.
Prosis said:
Oh that does look like a good one. Have you used it? If that point design is not rubbery but rather plastic it's going to be annoying to hold. Plus that lack of a slight lip on front worries me.
Click to expand...
Click to collapse
I use that one. It's got a rubber coating to it. Slim cases like that aren't meant for protection. No lip doesn't bother me as I have a glass protector.
joe3681 said:
I use that one. It's got a rubber coating to it. Slim cases like that aren't meant for protection. No lip doesn't bother me as I have a glass protector.
Click to expand...
Click to collapse
Oh I thought that being hard it would protect. OK then thanks!
If you have any cases you're interested in please let me know and if I have it I'll take pictures and give you a review of it. Reply to this thread with a ink of the product so I know which one you're talking about. I have pretty much purchased one of every case under $20 on both websites. Close to 100.
MyNarwhalBacon said:
If you have any cases you're interested in please let me know and if I have it I'll take pictures and give you a review of it. Reply to this thread with a ink of the product so I know which one you're talking about. I have pretty much purchased one of every case under $20 on both websites. Close to 100.
Click to expand...
Click to collapse
Do you have this one? It's cheap!
https://www.amazon.com/gp/product/B083LYJV6Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
cpufrost said:
Do you have this one? It's cheap!
https://www.amazon.com/gp/product/B083LYJV6Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
Sure do. This a generic case that is also sold on Aliexpress. It's not bad, especially for the price. It has a textured inside that feels coated with anti finger print stuff. It does attract dirt easily. The outside clear plastic is very slippery. The black frame is matte and has very little grip. The camera lip protects it OK and the top and bottom lips protect the front as well. I think could have come out a little farther as the sides have no lip, depending how the phone falls, could leave it vulnerable. The buttons are pretty springy. Cut outs should be all where they should be.
Protection: C
Button Feel: B
Materials: B
Which one is your top choice?
Do you have the i-blason marble case by chance?
https://www.amazon.com/i-Blason-Sam...rds=i-blason+marble+s20&qid=1587367089&sr=8-1
I don't need any case review but thank you for what you are doing, it's very nice from you.
What about this one?
Nillkin Camera Protection Case for Samsung Galaxy S20 Ultra 5G Slide Protect Lens Protection Cover for Samsung S20 Ultra 2020
https://www.amazon.com/Nillkin-Samsung-Galaxy-S20-Ultra/dp/B086W9LK12/
bigmann77 said:
Which one is your top choice?
Click to expand...
Click to collapse
Sadly. I don't have that one but I did have it for the S10+. Buttons were pretty responsive and protection was very good. A little bulky but the protection was excellent.
mxjcmxjc said:
What about this one?
Nillkin Camera Protection Case for Samsung Galaxy S20 Ultra 5G Slide Protect Lens Protection Cover for Samsung S20 Ultra 2020
https://www.amazon.com/Nillkin-Samsung-Galaxy-S20-Ultra/dp/B086W9LK12/
Click to expand...
Click to collapse
Already In the mail. Hopefully comes soon. I ordered this the day it came out on AliExpress
bigmann77 said:
Which one is your top choice?
Click to expand...
Click to collapse
Great question unfortunately it really depends what my day looks like. How formal I will be. If I'm going to be in a meeting all day or out and about. In the city or the wilderness. Even my outfit color.
Did you purchase any ballistic cases?
I'm curious if you have tried any of the "official" or "genuine" (/s) Alcantara cases on Aliexpress? https://bit.ly/2YdH46F is an example
20degrees said:
Did you purchase any ballistic cases?
Click to expand...
Click to collapse
Unfortunately none of which were under my price point. $15 - $20
pinoymutt said:
I'm curious if you have tried any of the "official" or "genuine" (/s) Alcantara cases on Aliexpress? https://bit.ly/2YdH46F is an example
Click to expand...
Click to collapse
Honestly they looked identical to my Samsung case. So I didn't. I just ordered it.
Did you purchase an Incipio Dual Pro? I'm concerned with the back camera protection.
I'm really looking for a case that have full front protection (including the side edges - most cases only have top and bottom lips) and the back camera not flush with the case.
freezingpoint said:
Did you purchase an Incipio Dual Pro? I'm concerned with the back camera protection.
I'm really looking for a case that have full front protection (including the side edges - most cases only have top and bottom lips) and the back camera not flush with the case.
Click to expand...
Click to collapse
Until I can find it for $15 or less I will not purchase it as it's outside my price range. Shame Incipio usually can be found cheap on ebay
Which case you got is the thinnest / least bulk?
Thanks.