Recently I flash my MiPad to LineageOS 14.1 lastest version.
My Wifi is dead, unable to turn on.
The MAC address is showing 02:00:00:00:00:00
When i try to revert the roms, the wifi is still dead.
and did some googling... one of the possibility is hw faulty.
Did anyone encounter this issue before, I hope there is a solution for this...
dynomist said:
Recently I flash my MiPad to LineageOS 14.1 lastest version.
My Wifi is dead, unable to turn on.
The MAC address is showing 02:00:00:00:00:00
When i try to revert the roms, the wifi is still dead.
and did some googling... one of the possibility is hw faulty.
Did anyone encounter this issue before, I hope there is a solution for this...
Click to expand...
Click to collapse
Try to flash fastboot miui ROM it may work ;_;
MAC adress 02:00:00:00:00
AbhaYsinGH007 said:
Try to flash fastboot miui ROM it may work ;_;
Click to expand...
Click to collapse
Did you find a solutiion for your issue, I have the same == MAC 02:00:00:00:00
Thks for your support
I am running cDroid and SmokeR21.5 kernel. Yesterday I noticed that after a restart Wifi did not turn on nor did connect to anywhere and MAC address was that 02:00:...
I did a shutdown to the tablet and then turned it back on and wifi started working and MAC address was something rational this time.
linux89 said:
Did you find a solutiion for your issue, I have the same == MAC 02:00:00:00:00
Thks for your support
Click to expand...
Click to collapse
after u fully poweroff, do u hv battery drain issue...?
Hey I still have that WiFi mac address problem, did anyone find a proper solution for it already?
Guy.brush said:
Hey I still have that WiFi mac address problem, did anyone find a proper solution for it already?
Click to expand...
Click to collapse
Hey guys I have the same issue, the MAC ADress ist stuck at 02:00:00:00:00
I checked via terminal emulator the Mac adress and it comes out a different one! I could even change it there. but nothing helped I couldn't switch Wifi ON. So I will try going back on MIUI and see if it's working. If it is working I'll let you know
Same issue here also
I am also having the same issue.after tried lineage os wifi is not switching on.mac adress unavailable.tried everything like reset.fastboot stock rom. Recovery stock rom.another custom roms.but no use.if anyone has solution plz help me
sainadh said:
Same issue here also
I am also having the same issue.after tried lineage os wifi is not switching on.mac adress unavailable.tried everything like reset.fastboot stock rom. Recovery stock rom.another custom roms.but no use.if anyone has solution plz help me
Click to expand...
Click to collapse
Any Solution you arrived? I am also having same issue.
Related
Any of us still on stock FRF91 with mac addresses not starting with 00:* are dealing with the bug where wi-fi disconnects when the phone goes to sleep:
(sorry, my account is too new to properly link the bug thread)
google.com/support/forum/p/android/thread?tid=01a47ff5b0a92d52&hl=en&start=120
This is fixed in the latest CM6 nightly builds, but I don't think it's possible to get the .ko from that build to work on stock FRF91.
I backported the fix from git (android.git.kernel.org/?p=platform/system/wlan/broadcom.git;a=commitdiff;h=5a838529e6197475cbe8f5a4557fbd31f90586a6) to the earlier version of the driver.
I've been testing this for the last 30 minutes and haven't been kicked off wi-fi once after the screen went to sleep.
How to install:
Make sure you're on FRF91 and have rooted yourself
adb shell and get root via 'su'
Copy your old driver to /data/local: cat /system/lib/modules/bcm4329.ko > /data/local/bcm4329.ko.old
Check that the MD5 of the unzipped .ko is 959dda656228b4191f8e97b920482ae2
From your system, adb push the attached bcm4329.ko (unzip it first) to /data/local/bcm4329.ko.new
adb shell and get root via 'su' again
Copy the driver over top of the old one: cat /data/local/bcm4329.ko.new > /system/lib/modules/bcm4329.ko
Reboot
You'll probably screw up future OTA updates if you manually patch this, but it's easy enough to undo (just flash the stock FRF91 or replace the old driver). Also, it worked fine for me, but you'll be doing this at your own risk, etc, etc etc.
---
mmastrac, unrevoked
Does this work?
I'm at work without access to a usb cable and wonder if this is worth looking at later today.
I like this alot too bad am too bad at the shell stuff, can't this packed and flash it from recovery ?
nevermind that, I thought it's something different than normal push pull stuff.
Can do this through Root Explorer very easy and less hectic.
This doesn't work on CM 6RC1. get a wireless error can't start wireless.
I don't have the problems that my nexus logged of the wifi network while screen is off.
But when I make a ping to nexus one everything is fine when screen is on, but it become very unresponsable with screen off and has connection time out.
Is this the patch for that problem?
Can more people test this out? Some people report that the latest CM doesn't fix this issue.
kindiboy said:
This doesn't work on CM 6RC1. get a wireless error can't start wireless.
Click to expand...
Click to collapse
CM6 ships with a different kernel, so this .ko won't work for those builds. This is only for those on the stock FRF91 build who can't use the updated driver from the latest tree.
For CM6 users, it should be fixed in the latest nightlies here:
hxxp://mirror.kanged.net/cm/nightly/passion/
Formel-LMS said:
I don't have the problems that my nexus logged of the wifi network while screen is off.
But when I make a ping to nexus one everything is fine when screen is on, but it become very unresponsable with screen off and has connection time out.
Is this the patch for that problem?
Click to expand...
Click to collapse
This patch should fix this issue. The broadcom driver in stock FRF91 filters out traffic to the device when the screen is off due to a bug in the implementation that was supposed to filter out traffic to other devices instead.
I can ping my device even while the screen is off with this patch in place. You may also have to change your wi-fi sleep policy to get the best results.
mmastrac said:
This patch should fix this issue. The broadcom driver in stock FRF91 filters out traffic to the device when the screen is off due to a bug in the implementation that was supposed to filter out traffic to other devices instead.
I can ping my device even while the screen is off with this patch in place. You may also have to change your wi-fi sleep policy to get the best results.
Click to expand...
Click to collapse
Hi man, maybe you can check out the my thread about this issue here:
http://forum.xda-developers.com/showthread.php?t=731395
I hear there are people with the latest nightly build still finding the problem exists. And their MAC address starts with actually 00?
How about your case? Did your phone have this problem before and its MAC address, I suppose, begins with 38?
hbkmog said:
Hi man, maybe you can check out the my thread about this issue here:
I hear there are people with the latest nightly build still finding the problem exists. And their MAC address starts with actually 00?
How about your case? Did your phone have this problem before and its MAC address, I suppose, begins with 38?
Click to expand...
Click to collapse
My n1 has a 38:* MAC address, so I was seeing wifi disconnect almost as soon as the screen went off (and getting disabled in some cases).
There are other wifi issues on the n1 phones. This patch just fixes the worst one.
Yes, and my NexusOne has a MAC starting with 00.
WiFi doesn't disconnect, but I can't hear stream audio....
I try this fix here now.
But, what I wanna know:
Kernel updates includes this bcm***.ko, too.
Can you share your fixes, that the kernel devs can use them, too?
I tested this and seems to be working fine, thanks a lot.
Just wanted to add another thank you. I tried this and it's worked great.
Hm, it doesn't work on enoms rom.
Now I'm sad.
Formel-LMS said:
Hm, it doesn't work on enoms rom.
Now I'm sad.
Click to expand...
Click to collapse
Possibly because enoms rom is using a different kernel. I suggest you request enom to update the driver source in his rom.
Hi guys
someone can upload a modified stock (FRF91 or FRG33) with the fix?
i don't know how to fix it and i will be very grateful
thank you!!
@mmastrac
thank you
it works only on original FRF91 ROM
can you make ist for FRG33 ?
I just tested the new FRF83 (2.2.1) and it includes this fix. Pings now go through when the wifi sleep policy is set to never, as they should.
I'm not really sure about this part, but looking at the new bcm4329.ko binary it appears this patch was included:
http://android.git.kernel.org/?p=ke...ff;h=8097ca0f92819b977472381f46315de15633361c
nachod0g said:
I just tested the new FRF83 (2.2.1) and it includes this fix. Pings now go through when the wifi sleep policy is set to never, as they should.
Click to expand...
Click to collapse
Thanks heaps for confirming. I guess there isn't much stopping me from going to the new firmware other than another 1-click root method.
i had my x10mini wireless not working.i can see all the wireless,tried to connect to my home wireless,not connected.the wireless signal is not shown on the top screen.tried reboot,restore still the same.Using 2.1.1.A.0.6.Pls help.Thks. Sorry for my poor english.Thks in advance.
jingaro said:
i had my x10mini wireless not working.i can see all the wireless,tried to connect to my home wireless,not connected.the wireless signal is not shown on the top screen.tried reboot,restore still the same.Using 2.1.1.A.0.6.Pls help.Thks. Sorry for my poor english.Thks in advance.
Click to expand...
Click to collapse
1. Try with other wifi places.
2. Try reflash again.
3. Do you use JIT? Disable it.
hansip87 said:
1. Try with other wifi places.
2. Try reflash again.
3. Do you use JIT? Disable it.
Click to expand...
Click to collapse
Tried with other wireless but still the same,cant connected.i restore many times & reflash but still the same.i never JIT before.i did root & wanna flash but i always failed.So i just leave it.Then I factory data reset.the next i tried connecting my wireless..It did not respond.I was so Frustrated..... Pls anyone help me.thks..
Maybe you should send it to SE?
Sent from my U20i using XDA App
jingaro said:
i had my x10mini wireless not working.i can see all the wireless,tried to connect to my home wireless,not connected.the wireless signal is not shown on the top screen.tried reboot,restore still the same.Using 2.1.1.A.0.6.Pls help.Thks. Sorry for my poor english.Thks in advance.
Click to expand...
Click to collapse
to solve this problem you need to go to your rooter/modem manengement page and disable SSID disolving(or some thing like that)
even if that donsent solve the problem.
change your password security to WAP2 or WEP
PTGamer said:
to solve this problem you need to go to your rooter/modem manengement page and disable SSID disolving(or some thing like that)
even if that donsent solve the problem.
change your password security to WAP2 or WEP
Click to expand...
Click to collapse
Could u pls guide me on what to press.I'm a noob.thks...
I just bought this tablet and I can`t get the wifi to connect. It keeps toggling the wifi on and off and I can`t connect. I have power cycled and rebooted several times but can`t get it to work. Any suggestions would be helpful.Skip
Read more: Ampe a76 wifi cycles on and off but cant connect? - I just bought this tablet and I can`t get the wifi to connect. It keeps toggling the wifi on and off and I can`t connect. I have power cycled and rebooted several times but can`t get it to work. Any suggestions would be helpful.
Thanks.
Bump
I have the same problem with this tablet,. Hope someone could help us.
@Half Alive Yes, I've read it on some other forums too.. I've tried to download official firmware, it takes for a full day do download it!
But that dose not help, cuz I don't know how to flash the damn thing!!
By the way it worked fine for the first couple of hours...
@Bucika
The same here, Worked just fine in the first two days with some problrms.
Flashing stock rom didn't help to get this problem solved.
You can use live suite to flash it.
Sent from my LT22i using Tapatalk 4 Beta
@Half Alive Do you think that the problem, can be hardware, not the software??
Really don't know,. I hope not.
UP
Sent from my LT22i using Tapatalk 4 Beta
There is a new update on the official device page.
fixed my wifi ,.. now i can turn it on and connect to my router ,.. but sadly there is no internet connection.
http://www.szampe.com/support_down.asp?id=1181
Edit: Flashed the fw with format option.. Now internet is working.
Thank you man, it worked!!
Download link is not working
Half Alive said:
There is a new update on the official device page.
fixed my wifi ,.. now i can turn it on and connect to my router ,.. but sadly there is no internet connection.
Edit: Flashed the fw with format option.. Now internet is working.
Click to expand...
Click to collapse
Dear friend,
Thank you for helping us. unfortunately szampe site is down and the download link is not working. Could you upload the working fw file to any upload site. Appreciate your effort.
Thanks
hany
Hi
anyone experienced this message "device is connected but offline. maybe you can solve this with pc rebooting."
It has worked before but suddenly that message appears at PC everytime Im connecting my phone with ShareKM. Anyone who can help me?
n7100user said:
Hi
anyone experienced this message "device is connected but offline. maybe you can solve this with pc rebooting."
It has worked before but suddenly that message appears at PC everytime Im connecting my phone with ShareKM. Anyone who can help me?
Click to expand...
Click to collapse
I get that with all the new 4.4.2 roms try flashing a different kernel I use AGN but i have a 317/7105. so i don't know if its available for the 7100
I just checked its available for the 7100
3 David flas hingst to snottet rom.3781729 said:
I get that with all the new 4.4.2 roms try flashing a different kernel I use AGN but i have a 317/7105. so i don't know if its available for the 7100
I just checked its available for the 7100
Click to expand...
Click to collapse
I am trying to avoid flashing to another rom and it was working a week ago
n7100user said:
I am trying to avoid flashing to another rom and it was working a week ago
Click to expand...
Click to collapse
Its not a rom just the kernel
I did some searching using your title and this solved my problem as i went back to stock kernel and its all connected now http://theappslab.com/2013/04/16/android-4-2-2-and-the-mystery-of-device-offline/
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
edjudas said:
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
Click to expand...
Click to collapse
CLEAN Flash fastboot rom in EDL mode.
Black_Stark said:
CLEAN Flash fastboot rom in EDL mode.
Click to expand...
Click to collapse
Hello, thanks for the reply man, do you know some guide on how to do it?
edjudas said:
Hello, thanks for the reply man, do you know some guide on how to do it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...oot-to-edl-mode-fastboot-test-t3398718/page23
---------- Post added at 05:26 AM ---------- Previous post was at 04:29 AM ----------
edjudas said:
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
Click to expand...
Click to collapse
After flashing in edl mode if still asking for password.
Then login using ur dads mi account on computer
Go to devices
and delete redmi note 3 device entry in devices option if present.
---------- Post added at 05:27 AM ---------- Previous post was at 05:26 AM ----------
edjudas said:
Hello guys.
To cut it short, I found an old note 3 pro in a drawer, it was my dad's and I wanted to just tinker with it.
The problem is, my dad forgot the password, and the wifi on the phone is not working (don't know if it is a software or hardware problem).
No big deal I thought, and I factory reset it.
Now, on startup, it tells me to ''activate'' the device by prompting in the password for the xiaomi account linked, which is not possible since the wifi is not working (aka no internet), and it is not possible to activate data and just use 4g.
Not possible to flash a rom through fastboot, usb debugging wasn't enable and my pc doesn't see it.
What should I do to save it?
Click to expand...
Click to collapse
After flashing in edl mode if still asking for password.
Then login using your Dads mi account on computer
Go to my devices option
and delete redmi note 3 devic if present.
Black_Stark said:
After flashing in edl mode if still asking for password.
Then login using your Dads mi account on computer
Go to my devices option
and delete redmi note 3 devic if present.
Click to expand...
Click to collapse
This wouldn't work as phone has no data connection to verify this.
n0b0dy666 said:
This wouldn't work as phone has no data connection to verify this.
Click to expand...
Click to collapse
It will only work if u put dads sim in ur phone and reset password.
I managed to flash it and unlock it, the only problem is that the wifi is still not working, displayed mac adress is 02.00.00.00.00, tried multiple fix but none worked...is it hardware failure not software?
edjudas said:
I managed to flash it and unlock it, the only problem is that the wifi is still not working, displayed mac adress is 02.00.00.00.00, tried multiple fix but none worked...is it hardware failure not software?
Click to expand...
Click to collapse
wifi and bluetooth both not working??
Black_Stark said:
wifi and bluetooth both not working??
Click to expand...
Click to collapse
yes, it says something like ''impossible to get ID device, bluetooth needs a correct ID or IMEI bla bla bla''
It's not like wifi, bluetooth toggle works and it stays blue when I use it; the wifi one becomes blue (on) for a second then turns grey (off)
edjudas said:
yes, it says something like ''impossible to get ID device, bluetooth needs a correct ID or IMEI bla bla bla''
It's not like wifi, bluetooth toggle works and it stays blue when I use it; the wifi one becomes blue (on) for a second then turns grey (off)
Click to expand...
Click to collapse
Can u see Imei number ?? Is it showing ?
edjudas said:
yes, it says something like ''impossible to get ID device, bluetooth needs a correct ID or IMEI bla bla bla''
It's not like wifi, bluetooth toggle works and it stays blue when I use it; the wifi one becomes blue (on) for a second then turns grey (off)
Click to expand...
Click to collapse
if IMEI number is not showing you might have to restore using QCN tool