[Unbrick Help] BQ Aquaris X5 - Android Q&A, Help & Troubleshooting

Hello there,
i need help with unbricking my Bq Aquaris X5 Cm Edition (codenname: paella).
I flashed Twrp, was not able to flash SU.zip. And flahsing LineageOs failed with "error7"
after i was unable to flash lineage and doing other stuff i had no system installed any more so i flashed cm unnofical gohan version with the flashall.bat.
And then i rebooted and had the mess. The phone does not want to turn on. Only thing that the phones give me as a "sign of life" is the red LED when i plug in the charging cable and give him power.
Im not able to get into fastboot or recovery mode. So my questions is: Is there ANY way to get that phone back to life?
Istn the normal way flahsing old bootloader and then original firmware?
But for that i need to get to fastboot mode which im not reaching.

LaCereb said:
Hello there,
i need help with unbricking my Bq Aquaris X5 Cm Edition (codenname: paella).
I flashed Twrp, was not able to flash SU.zip. And flahsing LineageOs failed with "error7"
after i was unable to flash lineage and doing other stuff i had no system installed any more so i flashed cm unnofical gohan version with the flashall.bat.
And then i rebooted and had the mess. The phone does not want to turn on. Only thing that the phones give me as a "sign of life" is the red LED when i plug in the charging cable and give him power.
Im not able to get into fastboot or recovery mode. So my questions is: Is there ANY way to get that phone back to life?
Istn the normal way flahsing old bootloader and then original firmware?
But for that i need to get to fastboot mode which im not reaching.
Click to expand...
Click to collapse
I'm in the same situation with a BQ X5 plus, I think the only way is to get the phone to the BQ service center
Did you get the phone working again ?

Nope i handed it over to the support and got a New one because guarentee was still valid

LaCereb said:
Hello there,
i need help with unbricking my Bq Aquaris X5 Cm Edition (codenname: paella).
I flashed Twrp, was not able to flash SU.zip. And flahsing LineageOs failed with "error7"
after i was unable to flash lineage and doing other stuff i had no system installed any more so i flashed cm unnofical gohan version with the flashall.bat.
And then i rebooted and had the mess. The phone does not want to turn on. Only thing that the phones give me as a "sign of life" is the red LED when i plug in the charging cable and give him power.
Im not able to get into fastboot or recovery mode. So my questions is: Is there ANY way to get that phone back to life?
Istn the normal way flahsing old bootloader and then original firmware?
But for that i need to get to fastboot mode which im not reaching.
Click to expand...
Click to collapse
yes you have to install qualcomm drivers and see in what mode the phone are.
9006, 900E or 9008

solved
I HAD the same problem with my BQ Aquaris X Pro.
Running the lineage OS 15.1, rooted with AddonSu installed.
This is how I was able to wake it up again.
1) I unplugged the phone from the USB loading cable
(don't know if this step is needed - the battery was definitely not totally empty, when this red flashing LED thing occurred. However, i don't think the phone charges when the LED red light flashes.).
2) I took the sim card out (don't know if this step is needed).
3) I pressed for about 2 [minute] power and volume (don't know if up or down) button together. And then it woke up again.
Maybe this is the special boot recovery mode option mentioned here?
What ever it is, it worked for me.
+ https : / / wiki.lineageos.org/devices/bardockpro
Good luck!
ElmBeech

Related

Bricked, am I still salvageable ?

There's a TL;DR at the end !
Hi - I hope you will be able to help me !
I have a XT910 Motorola Razr from Rogers in Canada.
I've had a Nexus S for a long time and I guess I wasn't prepared for a phone that wasn't as friendly to modding and flashing.
Before trying to flash a version of CM10 found here in the forums, I installed CWM Touch and made a nandroid backup - standard stuff.
What I didn't realize until it was too late is that booting into recovery DOES NOT boot CWM Touch - but rather the regular android one - the one that does not allow you to do much other than to factory reset.
I found out about RSD Lite but not until my battery wasn't charged enough and couldn't do anything about the phone.
I searched for the longest time on a LOT on different forums about how I could fix this and resorted to getting a factory cable - which works.
So, now, I can flash stuff using fastboot. Great, right ? Well, I still can't get things working.
RSD Lite doesn't detect my phone, and I believe that's because ADB doesn't detect it as well - so I tried that alternative way to flash fastboot files provided by the eternity project.
I've tried various fastboot packages but to no avail.
The best I can do is to get past the motorola logo - then black screen. Otherwise, I get boot or flash failures and get sent back to fastboot.
When the phone is on the black screen and that I plug a USB cable to my phone, Windows sees the device but it doesn't recognize it - I assure you I've tried all the different drivers to try and get it to work. Nothing.
Worth mentioning - I often get errors "Preflash validation failure" when trying to flash stuff.
I really feel I could fix this issue by flashing an IMG version of CWM touch or some other sort of recovery so that I can recover using a nandroid but they are no where to be found ! I can't believe that all recovery options are installed by APKs.
Any ideas ?
TL;DR, XT910 went boot looping after trying to flash CM10 - resorted to getting a factory cable and even then, can't get the phone back into working condition. Phone is detected by fastboot but not ADB.
Thanks !
first... the battery is the problem
this article can help...
How to Boot your Phone on Low Battery with Fastboot Flash Failure
To boot your phone on low battery where you get stuck on fastboot flash failure, hold down Volume Up and Volume Down then plug in “AC” USB charger to your Droid Razr. This will give you the bootloader menu upon where you can choose “Normal Recovery” to boot. If your phone doesn’t boot here, it will at least re-charge the battery normally instead of being stuck on fastboot flash failure which will re-charge your phone “very very slowly”.

Left the phone (Redmi Note 3) on charging, came back and saw that it is stuck at mi l

It was completely fine before that. It has been 3 weeks since I rooted the phone and it has been working perfectly. There was a pending update though (couldn't install it because it was leading to TWRP recovery mode at boot for some reason).
The battery was low, I connected the charger (not PC) and now the phone is not booting up. Just stuck on the logo. I can go into recovery mode and fastboot but that's it. I have no idea how to proceed.
8.2.4.0 (MHOMIDL)
Android version 6.0.1
I followed this guide to root my phone - r/Xiaomi/wiki/advanced/root (on reddit.com) (I can't link the link)
I would appreciate any help
Try to flash miui with my flash or something custom with twrp, if you need to backup data, you can do it with twrp.
its soft bricked....use mi flash tool to fladh fadtboot rom

Redmi 3 Pro stuck/bootloop hopeless

R3 Pro (3GB/32GB, 2015817 version) came with some chinese/sellers custom ROM (and locked bootloader). It was heavy and bloated, so I decided to update it. Tried latest global stable (fastboot) ROM via miflash, flash was successful but that's was a lie - it stuck on mi logo...
Then I tried various other ROMs, global and developers, latest and older, some xiaomi.eu, manhit, etc. (for locked bootloader) and all I've got was either just a mi logo or mi logo with "powered by android" animation beneth. I left it for hours after flash and still nothing.
Then I found some ways to flash twrp, did that successfully, booted into it, wonder around in terminal and file manager, tried some recovery ROMs - but the result is the same - just logo or logo + animation.
I can get into fastboot (but it doesn't realy matters since bootloader is locked), download (EDL) mode, that Xiaomi menu (with Power and Vol+, with "shortcuts" to all the modes, hardware tests - btw. everything works there, etc.), twrp, charge battery (with some ROMs phone just gets warm and I know it's charging, there are no LED and/or animation, but in some everything works just like it should), but just can't boot into OS.
And I'm going nuts!
Here are some logs from the last ROM (i don't even know anymore which one is it) - pastebin.com/qaKVzxue and pastebin.com/dM3nEVj0
I'm not so experienced in looking at that but seems like every other thing in there, like cpu, i2c (touch/sensor), sound, battery, etc. is broken/faulty which is not true - everything was fine before update, and everything IS still fine according to inbuilt (xiaomi) hardware tests.
So somehow it seems that all the ido ROMs I tried are wrong for this device? Or am I missing something (quite possibly, I'm tired and pissed off)
Last night I did a backup of efs/nvram and then wiped internal memory/partitions, flashed latest global ROM, restored efs/nvram - phone stuck, but this time not on MI logo but freakin' penguin logo (like here en.miui.com/thread-377870-1-1.html). Same logo is for fastboot mode, no more bunny. Then flashed twrp and phone now shows mi logo with "powered by android" animation beneath, like before...
I don't know how this works with Xiaomi phones, but looks like it worked with some factory/seller special combination of ROM and bootloader. Then I did update and something stuck, maybe differences between ROM and bootloader, or some inside/hidden security mechanism that stops boot process? And because I can't find original firmware and/or bootloader is locked (maybe even updated?) it's now stuck...
Either that or some HW fault, but it would be insane that official ROM update with official tools and in factory download mode with full battery can cause such problem!
Can you go to twrp recovery?
Yes, like I said in the first post. I can do anything but boot android/MIUI. It's either because of locked bootloader or somehow official ROM installed officialy (via MiFlash in EDL mode) bricked phone, which is catastrophic bug i.e. epic design/implementation fail by Xiaomi.
Try this
https://forum.xda-developers.com/redmi-3/help/bootloop-bootloader-locked-options-t3331139
Sorry to intrude, I have pretty much the same problem.
Phone is stuck in bootloop and I can only access fastboot mode and EDL mode (but in EDL the phone does not connect to pc) and when I try to flash a stock ROM (since I know it is a software issue due to an unfortunate update) it says "locked device". So I tried to unlock it via MiUnlock... but phone cannot be verified 'cause "account not bound to this device" and obviously I cannot change any options since I cannot use my phone.
Please, help
it was happened to me about 3 days ago when i play around with the twrp & rooting thingy... tried everything from youtube to various forum solutions... just one link really works when you only have fastboot options and your phone bootloader is still unlocked. just follow the steps in the OP... key things here is downloading the tool to read your phone as mentioned in the OP i.e [TOOL]Minimal ADB and Fastboot [1-6-17]
1) Download Tool -> https://forum.xda-developers.com/showthread.php?t=2317790
2) Follow all the steps in the OP -> http://en.miui.com/thread-277276-1-1.html
3) Enjoy your phone from back from the dead.. LOL!
4) Remember here, the key is NEVER GIVE UP and PATIENT!
NOTE : The Device will start, wait till completion , it can take up to 10 Minutes. -> for me around 15-20 minutes for I have flashed the current beta rom of MIUI8 7.6.8
cheers, guys!
blx-
I had a similar situation.
Officially unlocked boot loader. Flashed TWRP using fastboot. Only got the mi logo and a boot loop on start up.
Could not turn on. Could not boot into TWRP.
When the phone was boot looping I could still get into fastboot mode by holding power+volume down.
I booted from fastboot mode into TWRP by opening the command prompts and using
"fastboot boot twrp2.img"
That got the phone available from windows explorer. I was able to move a new ROM image to the SD card and install from TWRP.
Currently running lineage 14.1 -20190112.
I lost a bunch of **** but my phone seems to turn on for the moment.
Note, I still cannot boot into TWRP using the phone only. I can only boot in from fast boot as above.

Allview x4 Soul Pro Xtreme - Bricked or not?

Hello guys,
I own a Allview X4 Soul Pro Xtreme, i think is a copy of GIonee A1. Yesterday, i flashed twrp, but i think i did flashed a wrong version, and custom recovery is gone, aswell as stock recovery. The phone was unrooted, but bootloader is unlocked, and everytime i open up the phone, it's just shows me an message: " Orange state, your cevice has been unlocked and can't be truster, your device will boot in 5 seconds". It just keep rebooting, without let me go into download mode, or even recovery mode with the keys pressed + power button. At this point, i can't even use adb fastboot because whenever i connect the usb to my laptop, it just shows me the message with orange state, and keep rebooting. I was thinking to use sp flash, but i can't find a room for sp flash. The phone is using Mediatek 6757 Helio p25 platform.
Is there any way i can fix it? Or i just have to buy a new one? Because i bought the phone 15 days ago...
Thank you!

[H] Homtom Zoji Z7 problems with flashing

Hello and Servus,
I recently got a Homtom from my neighboor to look at because its full of bloatsoftware and seems to have battery issuses.
First I tried to install TWRP by this guide "https://romprovider.com/2018/10/homtom-zoji-z7-root/" and this one "https://www.getdroidtips.com/twrp-recovery-zoji-z7/"
I was able to "install" twrp using adb but I was stucked in a bootloop after this, couldnt even get to recovery /twrp, so I tried my way with the Smart Phone Flash Tool.
Some problems where persistent and I couldnt connect my phone with the tool until I had to format it via.
After formating the phone and installing the stock rom I got from here "https://rootmygalaxy.net/stock-rom-on-zoji-z7-official-firmware/" I am now stuck even worse. I dont even have a bootloop, the phone just starts and goes off.
Even worse was it, after I tried to flash to a "higher" version I got from this post "https://forum.xda-developers.com/general/general/zoji-z7-4g-smartphone-t3613364" - I just got a display bug and couldn't do anything, so I flashed the stock rom again.
Right now the only thing that works is fastboot. If I try to boot it in recovery or else it just goes off.
Is there someone who can help me there ?

Categories

Resources