hi all
Near perfect build from marshmellow Aosp ended up in IMEI , BASEband unkown and NO SIM issue , xperia z ultra 6833
every thing is prefectly working CAM , wifi , gapss , rooting etc. battery is amazing and its very very fast as minimal install
i am out of options now so put to you guys to help me out i have tried almost every zip file posted ( around 10+ ) for modem fix but nothing fixes it .....!!
can any one please post a working modem fix / base band fix
CLUE
while being totally frustrated i dirty flashed few of those modem fix files and suddenly it fixes the issues and every thing started to work perfectly , thanksfully i backed up the system and boot image via twrp .. and now able to use it but cannot make a flashable zip out of it.
IDEA
can i some how convert the ext4.win partitions ( backupfiles ) into IMG files and then pack then via script into flashable zip for recovery ?? OR is there any thing from TWRP or any other recovery via i can extract IMG files of system and boot so that i can be used as base rom ?
OPTIONS I TRIED STEPS OF FAILURE
1, tried all modem .zip files ( FAILED )
2, extracted the backedup ext4.win system file via cygwin and extracted the /etc/firmware/ files and recomplied via updator script in my source folder of /system/etc/firmware files ( FAILED )
3, tried pulling the system.img via DD command successfully done , but while trying to flash it via fastboot got an error cannot load system.img i suspect due to very large size of it i.e .2 GB + i dont knwo why ? ( FAILED )
4, i tried /etc/firmware folder form a working rom and swaped with my source and recompiled via updator script ( FAILED )
try flashing stock rom with flashtool http://www.flashtool.net/downloads.php
edit: not sure what your problem is?
You dirty flashed some file that made the imei go bad? But it solved the problem?
I'm not getting it?
SUPERUSER said:
try flashing stock rom with flashtool http://www.flashtool.net/downloads.php
edit: not sure what your problem is?
You dirty flashed some file that made the imei go bad? But it solved the problem?
I'm not getting it?
Click to expand...
Click to collapse
@SUPERUSER
Follows are the steps i performed to give better idea about situation .
1, STEP 1 , i did : flashed the system and boot img files from aosp source build after which the IMEI wiped off.
2,Step 2, i search and flashed many modem.zip from xda posts but non of them worked. and IMEI issue still persists ( i tried one by one each file ) with clean flash .
3, Step 3, i tried two modem.zip dirty flash , and suddenly it worked after restart but i forgot which files i used
4, luckily before i wiped current combination i took the backups of system and boot img files
5, Problem , i need a proper modem file which can remove this issue happened in step 1 and 2 .
6 , Current solution or work around i did is , i Pulled the system and boot images from working rom and made them flashable zip .via script .. its working fine but its not a proper solution because in future if i want to edit the source then same issue will occur as i understand the issue lies with source i believe ..
I hope i made it clear as much as possible and hopefully get some help ...
pintspin said:
hi all
Near perfect build from marshmellow Aosp ended up in IMEI , BASEband unkown and NO SIM issue , xperia z ultra 6833
every thing is prefectly working CAM , wifi , gapss , rooting etc. battery is amazing and its very very fast as minimal install
i am out of options now so put to you guys to help me out i have tried almost every zip file posted ( around 10+ ) for modem fix but nothing fixes it .....!!
can any one please post a working modem fix / base band fix
CLUE
while being totally frustrated i dirty flashed few of those modem fix files and suddenly it fixes the issues and every thing started to work perfectly , thanksfully i backed up the system and boot image via twrp .. and now able to use it but cannot make a flashable zip out of it.
IDEA
can i some how convert the ext4.win partitions ( backupfiles ) into IMG files and then pack then via script into flashable zip for recovery ?? OR is there any thing from TWRP or any other recovery via i can extract IMG files of system and boot so that i can be used as base rom ?
OPTIONS I TRIED STEPS OF FAILURE
1, tried all modem .zip files ( FAILED )
2, extracted the backedup ext4.win system file via cygwin and extracted the /etc/firmware/ files and recomplied via updator script in my source folder of /system/etc/firmware files ( FAILED )
3, tried pulling the system.img via DD command successfully done , but while trying to flash it via fastboot got an error cannot load system.img i suspect due to very large size of it i.e .2 GB + i dont knwo why ? ( FAILED )
4, i tried /etc/firmware folder form a working rom and swaped with my source and recompiled via updator script ( FAILED )
Click to expand...
Click to collapse
Can you share the modem files you used to get it working?
You write you got it working and made a backup in twrp.
Can you mount the partition and pull the files?
I need:
mba.b00
modem.b01
modem.mdt
They are located in system/etc/firmware.
SUPERUSER said:
Can you share the modem files you used to get it working?
You write you got it working and made a backup in twrp.
Can you mount the partition and pull the files?
I need:
mba.b00
modem.b01
modem.mdt
They are located in system/etc/firmware.
Click to expand...
Click to collapse
thanks SU for your response , actually i just fixed it last night , i will upload the zip that worked actually for reference of others
the Rom is ready and i will upload it hopfully tonight IA.
thanks for your help
pintspin said:
thanks SU for your response , actually i just fixed it last night , i will upload the zip that worked actually for reference of others
the Rom is ready and i will upload it hopfully tonight IA.
thanks for your help
Click to expand...
Click to collapse
Hi, i have the same problem, installed NANZ Stock AOSP MarshMallow (Pure minimal ) (https://forum.xda-developers.com/xperia-z-ultra/development/marshmallow-stock-aosp-rom-t3625443) but i don't get the radio working. Hopefully you can help me?
Hi there I have responded to your question in original nanz aosp thread plz check
Thanks :good: will do
Related
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
Hi guys,
So I started trying to create the custom ROM for an old smartphone, the Wiko Cink Slim following a french tutorial (I'm french ) .
So I encounter a small problem , let me explain: In order to create a flashable zip for CWM recovery , I put in the zip file containing all the system files etc., then the boot.img ( from the stock ROM the wiko cink slim) and the META-INF folder containing the updater script and another file and everything ... provided by the tutorial I follow.
So after the change in the system folder , I decided to flash the custom ROM in the CWM .
When flashing , all goes well , no apparent error. So I restarts after the smartphone and the problem is that it remains blocked on the boot logo ... And it all the time, I even try to flash the zip healthy custom that I had previously copied and even problem ...
So, conclusion, the problem is not from the file system because it does not walk with the healthy zip ( so the system folder had absolutely no changes ) and I guess it does not come from boot.img because it comes directly from the stock rom the same smartphone. I think the problem of blockage at boot comes from the META-INF folder.
What do you think ? I think that the problem is folder META-INF. So, I attach the address of the download of the META-INF folder, and as I do not know code in the updater-script, check any errors.
https://drive.google.com/folderview?id=0B0kPUePrYTtEZHVmWVFPSVQ2Nzg&usp=sharing
And I just think, the meta-inf folder is planned for version 4.2.2 android while I have version 4.1.1 on my Wiko cink slim. The problem is not there?
Thank you in advance,
Bests regards :laugh:
I try update via recovery ( put this file to external strorage only )
1. boot to recovery mode hold Power + Volume Down button
2. Using the Volume buttons to scroll and the Power button to select, choose "Enter
recovery mode
3. Choose apply update from external storage
4. select "reboot system now after finished update
http://fota.asus.com/delta_package/.../WW_PF500KL-12.2.2.43-13.6.5.30-fota-user.zip
This screenshoot from my phone +Station
Error Status 7
I have error:
System partition has unexpected contents
E:Error in /sdcard/UL-ASUS_TOON-WW-13.6.5.30-user.zip
(Status 7)
anyone can help me?!
Same issue as well
Getting the same "System partition has unexpected contents (Status 7 )" any idea whats wrong?
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Gizoid1337 said:
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Click to expand...
Click to collapse
Thanks ! It worked for me
I reinstalled ver 12.2.2.43 which really is my current version, and then proceed to install MM 13.6.5.30 with success
Gizoid1337 said:
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Click to expand...
Click to collapse
Thanks to you I have updated my phone to marshmallow using twrp 3.0.0, which allowed me to re-unlock bootloader, and root my phone.
It can be done, you just need to remove a few lines in the updater-script file.
something with ro.fingerprint (that identifies the recovery, it was originally expecting stock).
Replace it inside the zip. Then transfer update to sd card or internal.
After that wipe system, then reflash .43, right after that flash the mm update.
Will take some time but it should work once everything is verified.
reflash bl unlock and twrp (just a precaution) , then you can leave.
It would say no os but ignore it.
First boot takes around 10-15 mins then presto you finally have it.
Haven't encountered any bugs yet and it freed up a lot of storage space. Makes me wonder why I had to wait for the update to come to me, so glad I'm done with that.
So that concludes the last major update for the padfone s.....
Can u help me pls? I've tried unroot ,wipe system data and reflash .43 which is my current rom but still got signature verification error. any suggestion to fix this? Thx
Justatechie said:
Thanks to you I have updated my phone to marshmallow using twrp 3.0.0, which allowed me to re-unlock bootloader, and root my phone.
It can be done, you just need to remove a few lines in the updater-script file.
something with ro.fingerprint (that identifies the recovery, it was originally expecting stock).
Replace it inside the zip. Then transfer update to sd card or internal.
.
Click to expand...
Click to collapse
which lines exactly ? cause i tried removing mine and im now getting an error in the zip
error 6 or something
dtgo said:
which lines exactly ? cause i tried removing mine and im now getting an error in the zip
error 6 or something
Click to expand...
Click to collapse
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
NightbladeSinX said:
Can u help me pls? I've tried unroot ,wipe system data and reflash .43 which is my current rom but still got signature verification error. any suggestion to fix this? Thx
Click to expand...
Click to collapse
Thats odd.
You should probably Re-download or transfer the ww file again. Could just be a bad transfer of data.
Make sure you have twrp 3.0.0 and that system protection off. (it pops up on the first screen, but you can find it under twrp settings)
Justatechie said:
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
Click to expand...
Click to collapse
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
dtgo said:
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
Click to expand...
Click to collapse
If it doesn't say anything about identifying the device model or checking system, then something is wrong.
Might be a bad edit or it might have gotten corrupted while transferring back into the zip.
I stick with N++ for the edits, sometimes windows file transfer can be a pain by itself while trying to replace the update script, 7zip might help.
dtgo said:
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
Click to expand...
Click to collapse
got it working thanks again man you've been a big help
Justatechie said:
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
Thats odd.
You should probably Re-download or transfer the ww file again. Could just be a bad transfer of data.
Make sure you have twrp 3.0.0 and that system protection off. (it pops up on the first screen, but you can find it under twrp settings)
Click to expand...
Click to collapse
Thx for reply. i manage to get updated to 6.0.1 but now i lost root. i did mistake not flashing twrp before 1st boot n it replace twrp to stock rec. Is there any root method available yet? I've tried latest kingroot but it was unsuccessful. Any way is there any difference between WW and TW firmware version?
NightbladeSinX said:
Thx for reply. i manage to get updated to 6.0.1 but now i lost root. i did mistake not flashing twrp before 1st boot n it replace twrp to stock rec. Is there any root method available yet? I've tried latest kingroot but it was unsuccessful. Any way is there any difference between WW and TW firmware version?
Click to expand...
Click to collapse
You could probably flash recovery through fastboot, only if your bootloader is unlocked. If not it wont allow the flash. it would say FAILED cant flash unsigned image, but theres a chance that it might have been flashed, just check to see if changes have applied.
Assuming that you have went to the fastboot portion of your phone you can check its status.
if its not unlocked, then you have to find another way to root to flash your twrp recovery back on your phone.
Did this, but kept getting errors due to (probably) my use of xposed. Managed to soft brick my phone, and recovered it using http://forum.xda-developers.com/padfone-x/help/guide-restoring-stock-rom-recovery-t3179818
After that, had to edit updater-script to remove all checks.
What tripped me up was just how long the update reboot took. Almost half an hour. I was going to give up but decided to leave it while taking a short nap.
heres the updater script for anyone having issues
Please can someone help me?
I'm trying so hard to get this to work but I'm barely getting anywhere. What I've done (thanks to ninekaw9's guide):
- unlock bootloader
- wiped everything (yet there is still stuff in the file explorer, like the su install folder)
- using fastboot boot recovery:
-- use TWRP 2.8.7.0 to transfer files from sdcard to emmc
-- with TWRP 2.7.1.1:
--- installed WW 99.99.99.0 for KK (works)
--- installed WW 12.2.2.27 for LP & stock recovery (works)
--- installed WW 12.2.2.43 for latest LP (works)
- removed every abort line from updater script to get it to stop complaining about fingerprint/unexpected system contents
- installed modified FOTA WW 13.6.5.30 for MM (no OS change)
So after all that, I'm where I started but with no apps.
Before I found out 2.8.7.0 couldn't flash stock ROMs I flashed 12.2.2.43 after a full wipe and ended up with no System UI...
Outcomes from using different recovery to flash MM update:
2.7.1.1 with unmodified: apparently my phone is TW not WW (incorrect)
2.8.7.0 with unmodified: some weird fingerprint with omni-T00N and 5.1.1, even after wipe and stock 12.2.2.43 flash. Couldn't edit or replace the default.prop file, it would just get overwritten each time
stock with unmodified: couldn't even mount my SD card, so tried ADB sideload, got the unexpected system contents message
stock with modified (no sha1): would no longer allow me to ADB sideload (0.00x message)
TWRP (either) with modified (no prop): unexpected system contents
TWRP (either) with modified (no prop/sha1): seems to work, but upon boot to system, nothing appears to have changed.
I desperately want MM so I have a smaller system partition, then I can stop pushing updates to system to save space, and therefore won't need root so I can play Pokemon GO and use Sky Q.
That or I'm going to try Magisk... Has anyone used this on a Padfone?
If anyone can guide me through which files/folders I can delete from my phone to save space, that would be great. I know most folders are mounting points, but there's a lot of .sh files and other folders that I'm not familiar with.
I've asked in another thread where I can get TWRP 3.x for Padfone S, but nobody has replied!
Please can someone help me?
Nintynuts said:
I'm trying so hard to get this to work but I'm barely getting anywhere. What I've done (thanks to ninekaw9's guide):
- unlock bootloader
- wiped everything (yet there is still stuff in the file explorer, like the su install folder)
- using fastboot boot recovery:
- use TWRP 2.8.7.0 to transfer files from sdcard to emmc
- with TWRP 2.7.1.1:
- installed WW 99.99.99.0 for KK (works)
- installed WW 12.2.2.27 for LP & stock recovery (works)
- installed WW 12.2.2.43 for latest LP (works)
- removed every abort line from updater script to get it to stop complaining about fingerprint/unexpected system contents
- installed modified FOTA WW 13.6.5.30 for MM (no OS change)
So after all that, I'm where I started but with no apps.
Before I found out 2.8.7.0 couldn't flash stock ROMs I flashed 12.2.2.43 after a full wipe and ended up with no SystemUI...
Outcomes from using different recovery to flash MM update:
2.7.1.1 with unmodified: apparently my phone is TW not WW (incorrect)
2.8.7.0 with unmodified: some weird fingerprint with omni-T00N and 5.1.1, even after wipe and stock 12.2.2.43 flash. Couldn't edit or replace the default.prop file, it would just get overwritten each time
stock with unmodified: couldn't even mount my SD card, so tried ADB sideload, got the unexpected system contents messagestock with modified (no sha1): would no longer allow me to ADB sideload (0.00x message)
TWRP (either) with modified (no prop): unexpected system contents
TWRP (either) with modified (no prop/sha1): seems to work, but upon boot to system, nothing appears to have changed.
I desperately want MM so I have a smaller system partition, then I can stop pushing updates to system to save space, and therefore won't need root so I can play Pokemon GO and use Sky Q.
That or I'm going to try hiding root Magisk...
If anyone can guide me through which files/folders I can delete from my phone to save space, that would be great. I know most folders are mounting points, but there's a lot of .sh files and other folders that I'm not familiar with.
I've asked in another thread where I can get TWRP 3.x for Padfone S, but nobody has replied!
Please can someone help me?
Click to expand...
Click to collapse
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
xantanion said:
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
Click to expand...
Click to collapse
Thanks. No wonder I couldn't find it as it doesn't mention 3.0.0.0 or 3.x or any version number at all.
I have answered my own Q&A thread with a link so hopefully others can find it. Will try it now.
xantanion said:
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
Click to expand...
Click to collapse
Thankfully it has worked many thanks. Unfortunately while Sky Q no longer complains about root, it does complain about my Padfone station being an external display, so still won't play videos
Hey,
Today I used a ROM to flash my mobile (Samsung J5 2016 edition, model: J510FN) and I just used the perfect ROM, and it fits perfectly. But when I try to turn on WiFi it goes back swipe to off automatically when I swipe it to on.
I used this rom (version v1.1 because v2 and v3 were gone and bad): https://forum.xda-developers.com/galaxy-j5/development/rom-light-stock-rom-v1-t3467865
Someone knows what to do? I'm a beginner, so please explain it good. I have everything btw like Odin, TWRP, latest SuperSU, etc.
Please help.
Thanks
From your stock rom Copy the folder named Permissions from /system/etc and paste it at the same location in your new downloaded rom.
DONOT delete the existing folder , just replace the files.
Good Luck Cheers
akash14darshan said:
From your stock rom Copy the folder named Permissions from /system/etc and paste it at the same location in your new downloaded rom.
DONOT delete the existing folder , just replace the files.
Good Luck Cheers
Click to expand...
Click to collapse
But its a md5 file (my stock rom), how do I do it then?
Zarlen said:
But its a md5 file (my stock rom), how do I do it then?
Click to expand...
Click to collapse
You mean an img file , right?
If you have twrp or cwm backup of your stock rom , you can extract it from that file(ext4.system.tar.a) , if you dont have a twrp/cwm backup , you can try to flash stock rom from that img file and then copy necessary files into sdcard and then re flash your new rom and paste the existing files.
Good luck/
akash14darshan said:
You mean an img file , right?
If you have twrp or cwm backup of your stock rom , you can extract it from that file(ext4.system.tar.a) , if you dont have a twrp/cwm backup , you can try to flash stock rom from that img file and then copy necessary files into sdcard and then re flash your new rom and paste the existing files.
Good luck/
Click to expand...
Click to collapse
No, its an md5 file. Inside the md5 file (when I open it with winrar) it only shows hidedcache files etc and also boot.img
I need to have go to the patch (system/etc/permissions
Zarlen said:
No, its an md5 file. Inside the md5 file (when I open it with winrar) it only shows hidedcache files etc and also boot.img
I need to have go to the patch (system/etc/permissions
Click to expand...
Click to collapse
Then you might need to flash your stock rom first and then copy the necessary files.
I have an Mediatek device , steps to troubleshoot are same , but I have a zip of my stock rom created to access stock files when ever i need them.
I would advise you to do the same for future troubleshooting..
Good Luck mate
akash14darshan said:
Then you might need to flash your stock rom first and then copy the necessary files.
I have an Mediatek device , steps to troubleshoot are same , but I have a zip of my stock rom created to access stock files when ever i need them.
I would advise you to do the same for future troubleshooting..
Good Luck mate
Click to expand...
Click to collapse
And what are the nessecary files? Only the permissions folder or more?
Zarlen said:
And what are the nessecary files? Only the permissions folder or more?
Click to expand...
Click to collapse
Permission folder worked for me , but i would insist you to copy the entire /system partition as backup once you have flashed the stock rom just in case.
If permission folder doesnt work , then try replacing files starting with wlan from /system/lib/modules from stock to port
Do only when permissions folder doesnt work.
Coolpad Note 3 and lite are now officially supported by DualBootPatcher
Steps to use DualBootPatcher :-
# Downlad and install latest DualBootPatcher
apk from here
https://dbp.noobdev.io/
# Open it -> Go to roms in option
Grant all the permission,set the kernal
and update the ramdisk in primary rom.
# Go to settings and install boot ui.
# Now go to patch zip file -> Add flashable zip
# Select the rom.zip , googleapps.zip ,
patches.zip , addons.zip which you want to
use as secondary rom.
Select your device , data slot , (ext sd slot not
tested).
And apply patch.
# After patch completes install all the zip files
you have patched from twrp.
# If u want to use inapp flasher of
DualBootPatcher,
flash this zip before u use the app.
https://mega.nz/#!xhgQERbL!5UEPeMbbHU9kxLBmWLpUpsosRk4lGmtr0S3pWgkbdeU
#Note : works only if your rom supports init.d or su.d
# After the flash completes, hit reboot ==>> u
will be in the second rom.
# To switch rom :- Methods(any one works )
1. Using boot ui :u get option to switch rom during reboot
2. Select the rom in the App and reboot.
3. Install the boot.img in internal -> mutiboot folder from recovery and reboot
# If something goes wrong :-
Go to recovery -> install boot.img of primary
rom.
Note : 1. Not all the roms are tested.
Do At Your Own Risk
2. Note 3 plus also added but not tested
those who are interested can test and
coment here
CREDITS:-
#Chenxialong : For the incredible app
@Uday Hegde (For this Guide)
@kuberrocks96 (personally tested on Coolpad Note 3 Lite)
UPDATE : WORKING ON COOLPAD NOTE 3 , LITE AND PLUS
Working On Coolpad Note 3 as well
Note 3 plus try..
Well got interested...did the steps all...
And given all permissions...
When I try to install ROM as secondary (tried cm 12.1) while installing rom I got error saying unable to symblink and other as failed to extract data file to /data...any idea how to fix this...
Thanks in advance
File uploaded for reference crash log and a screenshot..
RaghuStar said:
Well got interested...did the steps all...
And given all permissions...
When I try to install ROM as secondary (tried cm 12.1) while installing rom I got error saying unable to symblink and other as failed to extract data file to /data...any idea how to fix this...
Thanks in advance
File uploaded for reference crash log and a screenshot..
Click to expand...
Click to collapse
did u tried to flash from recovery..?
Uday Hegde said:
did u tried to flash from recovery..?
Click to expand...
Click to collapse
Oh well no..flashed it from the app...as secondary ROM..
And I was able successfully boot android lollipop stockrom and Nougat Resurrection remix custom ROM as dual..I had no problem with that...and for RR ROM I selected extsd slot...so basically I could install in SD card...but failed in other slots..(slot 1.2.3 or secondary did not work for me.) And I did not try in data...
RaghuStar said:
Oh well no..flashed it from the app...as secondary ROM..
And I was able successfully boot android lollipop stockrom and Nougat Resurrection remix custom ROM as dual..I had no problem with that...and for RR ROM I selected extsd slot...so basically I could install in SD card...but failed in other slots..(slot 1.2.3 or secondary did not work for me.) And I did not try in data...
Click to expand...
Click to collapse
It is bcoz
Secondary slot is of system partition
and other 3 slots are of cache partition
as there is not enough space in all these 4 slots,it wont work.
And data slot is working for all roms.Extsd slot is working only for some roms as I tested.
And it is better to use twrp to flash.
no probleam if ur rom supports init.d (just flash the fix)otherwise u may face an assue of in switching rom,need to flash boot image of secondary rom manually.
Uday Hegde said:
It is bcoz
Secondary slot is of system partition
and other 3 slots are of cache partition
as there is not enough space in all these 4 slots,it wont work.
And data slot is working for all roms.Extsd slot is working only for some roms as I tested.
And it is better to use twrp to flash.
no probleam if ur rom supports init.d (just flash the fix)otherwise u may face an assue of in switching rom,need to flash boot image of secondary rom manually.
Click to expand...
Click to collapse
Well twarp is for primary ROM right!! How can I flash it for secondary ROM??? Is their any option for that...because if I want to flash gapps for my second ROM..all I did was first patching the ROM selecting same slot in which my RR ROM is present and then flashing the file by logging into the primary ROM..
RaghuStar said:
Well twarp is for primary ROM right!! How can I flash it for secondary ROM??? Is their any option for that...because if I want to flash gapps for my second ROM..all I did was first patching the ROM selecting same slot in which my RR ROM is present and then flashing the file by logging into the primary ROM..
Click to expand...
Click to collapse
what the app does is it inserts some binary to handle the process of flashing into the zip files.
patch the zip files such as gapps or patches to the rom and give the same id as the rom,it will be flashed to ur rom(to which ro has that id).
and flashing the patched zip files from recovery will not touch the primary rom.binary will create create a chroot environment at /data/local/multiboot/slot-id/ and everything will be flashed into it...
Uday Hegde said:
what the app does is it inserts some binary to handle the process of flashing into the zip files.
patch the zip files such as gapps or patches to the rom and give the same id as the rom,it will be flashed to ur rom(to which ro has that id).
and flashing the patched zip files from recovery will not touch the primary rom.binary will create create a chroot environment at /data/local/multiboot/slot-id/ and everything will be flashed into it...
Click to expand...
Click to collapse
Thanks a lot bro...
It works in coolpad note 3 plus..so u can edit ur blog saying it is tested in cpn3+ also...all the best...
If I get any qustn I will post it...thank u very much bro
RaghuStar said:
Thanks a lot bro...
It works in coolpad note 3 plus..so u can edit ur blog saying it is tested in cpn3+ also...all the best...
If I get any qustn I will post it...thank u very much bro
Click to expand...
Click to collapse
sure bro
Thanks sir for the guide
yadavdharmendar said:
Thanks sir for the guide
Click to expand...
Click to collapse
All thanks to @Uday Hegde
Unable to dual boot RR with MIUI 8.1
Am trying to dual boot RR with MIUI 8 but its showing same error that was posted by RaghuStar. Even tried by TWRP recovery, but it showing same error, what should I do?
What exactly going wrong?
Am using Coolpad Note 3 Lite
unable to update ramdisk on cpn3. why?
ripon_b said:
unable to update ramdisk on cpn3. why?
Click to expand...
Click to collapse
may be ur using nougat rom.
its bcoz of special characters in board name.
to solve
backup your boot.img
unpack it using any boot.img unpack tool
edit boot.img-board using text editor
clear all the lines in that file
repack boot.img and flash
now it will not fail to update
abhishek_patil said:
Am trying to dual boot RR with MIUI 8 but its showing same error that was posted by RaghuStar. Even tried by TWRP recovery, but it showing same error, what should I do?
What exactly going wrong?
Am using Coolpad Note 3 Lite
Click to expand...
Click to collapse
use data slot or external sd card
I have tried that also..
abhishek_patil said:
I have tried that also..
Click to expand...
Click to collapse
u have log file of the error..??
Uday Hegde said:
u have log file of the error..??
Click to expand...
Click to collapse
Actually it was deleted, but according to my research, for dual boot, ram disk should be updated in both ROMs, but I noticed a problem with nougat ROM, I am unable to update RAMDisk in Nougat ROM, so when I dual boot it with MIUI, it goes in Boot Loop. But how can I update RAMDisk in Nougat?
abhishek_patil said:
Actually it was deleted, but according to my research, for dual boot, ram disk should be updated in both ROMs, but I noticed a problem with nougat ROM, I am unable to update RAMDisk in Nougat ROM, so when I dual boot it with MIUI, it goes in Boot Loop. But how can I update RAMDisk in Nougat?
Click to expand...
Click to collapse
check above comnts for update ramdisk in nougat roms.
but its not necessary to update ramdisk,it is required only to use boot ui.
Uday Hegde said:
check above comnts for update ramdisk in nougat roms.
but its not necessary to update ramdisk,it is required only to use boot ui.
Click to expand...
Click to collapse
Okay, i have following Questions.
1) Which software should I use to unzip img file.
2) I am unable to dual boot it with MM V010 on CN3L,
It showing same error posted by @RaghuStar.
3) Avoiding use of BootUI will prevent BootLoop?
4) Is there any effect of kernel version?