Hey. At the start I will say right away that my English is not perfect and my syntax may be incorrect. I have a problem with my V10. A few days ago I uploaded Android 7 in Turkish. The phone worked well for one day. The next day I watched a video on YouTube, after which the phone hanged. I pulled out the battery, put it back on, but the phone died. The computer in the COM ports appeared as a Qualcomm HS-USB QDLoader 9008. I used this unbrick guide on the phone, after many attempts to re-download the software (except the v30 with the upgrade option, because trying v10 or v20 always appeared error At 14%, I could not do the refubrish option because it was an error that the file could not be loaded using this option.) Glad that I fixed my phone I started configuring the phone, after which it hanged and restarted. Then I decided to do a hard reset. After that, the phone does not rise again. I read somewhere that the eMMc was corrupted and only the motherboard was broken, so my question is: do you have an unlocked bootloader and software for the 32GB H960ATR version can I give you a phone for a warranty? In such a situation, are they able to check what version of the software I have and I have unlocked bootloader? Is there any option to lock in this case bootloader having copies of bootloader files before unlocking it?
i was going to flash the turkish kdz.................
after this i will think
i feel sorry for you
Related
My original Vodafone Spain branded Nokia Lumia 800 had no problems at all since today. I have never tried to unlock it and has always installed the official updates through Zune.
Today I've received the notification for the 7.8 update! Yay! I started the installation through Zune (as always). Everything was ok: steps 1 trough 5 (downloading, transferring, etc.). And then, step 6: rebooting the phone. It rebooted, but the usual "do not unplug" icon didn't show. Instead, the screen was blank and Zune was waiting endlessly for the phone to reboot. A notification came through windows saying that the removable drive must be formatted, which I DIDN'T do. The device manager was showing a "Qualcomm MMC Storage USB device" along with another one with a yellow asterisk.
Searching the internet I found that my phone has a special Bootloader, which was not supposed to be available to the final users.
I know many people here would love to have the Qualcomm Bootloader, but what I would like right now is to have the standard DLOAD Bootloader!
So here is my question: is it possible to restore the phone to the standard DLOAD mode so I could install the 7.8 update through Zune?
I've tried installing the Qualcomm drivers, which installed flawlessly. Now I have no yellow asterisks, but a new COM port ("Qualcomm HS-USB Diagnostics 9006 (COM5)"), but Zune is still waiting for my phone to reboot....
UPDATE: I have tried with "Seven-Eighter" by Windows Phone Hacker wit the same result. Obviously is an issue related to the bootloader of my phone.
NOTE TO THE ADMINS: Should I better post this in the "Lumia 800 Windows Phone Development " section?
I've finally found the solution!
Just hold the camera button when Zune restarts the phone. Then the usual "do not unplug" screen appears and the process continues flawlessly.
Hi,
For lumia 800 - only way to change boot-loaders is through Test Points and ATF Flasher.
BR
Hello ! I have a problem . It irritates me any photo software from LG and would like to upload CyanogenMod . The first thing I did was to install the drivers for fastboot according to this guide :
http://forum.xda-developers.com/showthread.php?t=2119090
But I think something went wrong because the point 14 something goes wrong and the phone will not restart and I do not know if everything went about Is it possible to make sure they do that? When instalwoałem drivers in device manager I did not have the device LG P2 , and most of the pictures / videos I see that the phone is in the name. I only had the OMAP 4430 .
Secondly, I installed rom v20b open eu . I waited 30 minutes and according to this guide http://forum.xda-developers.com/showthread.php?t=2221102 I wanted to unlock the bootloader . Unfortunately, only the phone restarts . I have a bootloader version LK MAY- 2012 but apparently it has nothing to matter.
Drivers have rather all installed so it's not the drivers fault . Can anyone had a similar problem with bootloader but somehow handled ?
P. S. Sorry for my english , but I used Google Translator
Hello,
A lot of people seems to have the same problem as you. It is not linked to the bootloader version (I also have the "LK MAY- 2012" version and my bootloader unlocking was a success).
According to this post, you need an active SIM card during the 30 minutes wait : https://plus.google.com/115049428938715274412/posts/CUu6YE3C6C2
Did you have an active SIM card when you tried it ?
There are references to "permanently locked bootloader" if something was done wrong : I hope for you it is not the case .
I hope too.
Yes, I was an active sim card for 30 minutes, if the word active, we understand that is inserted into the phone Do you think that doing this on Linux which is expected to make the difference? And you had any problems with unlocking or immediately did you do it?
Motorola G4 XT1625
Minor Problem: Phone will not start normally, only boots into Fastboot mode.
Minor Problem: Phone is oem Locked
Major Problem: I never went into "settings" on the phone and ENABLED OEM UNLOCKING.
Question: Is it possible to get this phone flashed with stock ROM?
A little background. Not a developer, phone started acting up a few days ago, shutting down or rebooting on its own, do not remember anything such as an update or my clearing of the cache occurring in that time frame, but I was still hoping it was a software issue that would work itself out. Now the phone fails during start up and reports this
STARTUP FAILED
ERROR: Failed to pass validation , backup to fastboot.
It does mention I should use Software Repair Assistant to recover the phone, which correct me if I'm wrong , only works with Verizon phones. I did try the SRA, it connected to the phone, but would stall about halfway through.
I have found much info on this forum regarding unlocking the bootloader of this phone, I have installed on Moto tools on my PC, requested and received an unlock code, connected to the phone and can send commands via command line. Unfortunately when I send the oem unlock the phone responds that I need to enable development mode in settings, which I cannot get to because the phone wont boot to the OS. Is there an easy way around this that I'm just not seeing?
In the end the problem may be hardware related, I just hate to give up on it so easily. Contacted Motorola about the device, as it turns out the unit was 6 days out of warranty ( that's if you use the Amazon ship date, it was only actually 2 days out if you use the activation date). Their response was as expected, sorry can't help you, thanks for being a Motorola customer, have wonderful day, next........
MSC 1/24/18
Hey guys. Im pretty new to this so ive got no idea how to solve this issue, ill try to describe best as possible. So I was using Lineage on my device and TWRP. Since I had this, each time I started my phone a screen saying "Bootloader is open, security issues" or something like that, so I decided to try to close it. When I did, TWRP appeared, something started typing in the command line and the phone shut down.
Since then the phone is completely bricked. No recovery mode no nothing. When I connect it to my PC it says: "Qualcomm HS-USB Diagnostics 900E (COM3)". Is there any solution for this? I wrote customers service and they told me to send it to them but I dont know if theres anything I can do by myself to fix it.
Bootloader is open so the CPU is allowed to execute unsigned code. When you relocked the bootloader the phone got in the unbootable state since all the code on it is unsigned. TWRP is not signed, not OEM binary, and most likely, the Linux Kernel your LineageOS was running was not signed. Very few phones execute unsigned code with locked bootloader.
So, I have an LG v30 that I remember I absolutely loved at one time, and I probably still do. It's been sitting in a box because a couple years back amidst trying root my phone and all I managed to brick this LG V30 I have. The only thing I don't remember how I did it. I do know that the phone doesn't turn on anymore. It's just a black screen with no vibes or anything. But device manager wakes up when I plug it into Windows. So there IS something there. Is there anyway I could revive this phone somehow? I haven't been practicing with any of this stuff for a couple years, but all like riding a bike, no? If anyone has any insights into this stuff, would you be able enlighten me? Or am SOL?
I'd first try following the unlock & root guide:
LG V30/V30+/V30S Bootloader Unlock & Root Method (With Clear Instructions)
(WTF...!) LG V30/V30+/V30S Bootloader Unlock & Root Method (With Clear Instructions) WTF...! LG V30,V30+,V30S (MOST VARIANTS) BOOTLOADER UNLOCK, TWRP, ROOT INSTRUCTIONS HERE >>>CLICK HERE TO POST #193
forum.xda-developers.com
It could be that your phone is in download mode or something and accessible with LGUP or ADB tools.
If not, there's an unbrick guide here:
LG V30 Unbrick guide (Qualcomm EDL 9008 Mode, Hardbirck, with no download mode)
If you try this method, I nor anybody else is responsible for any further damage done to your phone. Models Confirmed : V300L We currently have firehose for V30. Therefore, we can program UFS flash memory in 9008 mode. It requires...
forum.xda-developers.com
Before trying the method in the first post, however, you may want to try the newer method in my reply, though:
LG V30 Unbrick guide (Qualcomm EDL 9008 Mode, Hardbirck, with no download mode)
If you try this method, I nor anybody else is responsible for any further damage done to your phone. Models Confirmed : V300L We currently have firehose for V30. Therefore, we can program UFS flash memory in 9008 mode. It requires...
forum.xda-developers.com