[GUIDE]P10/P10+ root with magisk & SN verified/installing firmware - Huawei P10 Guides, News, & Discussion

Hello,
Here is a guide for anyone that wants to keep root with SafetyNet verified on Huawei P10 and P10+, also here you will find how to install/update P10 and P10+ firmware.
REQUIREMENTS
- Unlocked Bootloader(BEFORE&AFTER YOU INSTALL FIRMWARE)
- TWRP recovery for P10(AFTER INSTALLING FIRMWARE) : https://.xda-.com/p10/development/testers-twrp-t3585256
- Make a back up of system,products,vendor,boot,etc. in twrp(optional,but recommended)
Now,the steps :
1. Install your stock firmware(or update) : http://www.stechguide.com/?s=huawei+p10 (read the steps in there carefully and see if your build number matches the one on the site!)
STEP 1 IS NOT NEEDED IF YOU NEVER TRIED TO ROOT YOUR P10!
2. After you installed your desired firmware go ahead and unlock bootloader again(this will factory reset your device)and install TWRP recovery.
3. Download Magisk v12,Magisk Manager and uninstaller and flash Magisk v12 with TWRP and then install Magisk Manager.
Magisk v12: https://forum.xda-developers.com/attachment.php?attachmentid=4095052&d=1490916845
Magisk manager for v12: http://www.apkmirror.com/apk/topjoh...se/magisk-manager-4-3-3-android-apk-download/
UPDATED :
I found a way to install v13 on p10,p10 plus,not sure if p10 lite also :
Go in magisk manager(magisk v12) and check the "Keep force encryption" and "Keep dm-verity" boxes,and then press install/update (if this doesnt work),download a terminal emulator(https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en) and type this :
Code:
su
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk

---

Thank you ! Finally I learned to debrand hoping viper4android will work with magisk.

---

juntulis said:
Thank you ! Finally I learned to debrand hoping viper4android will work with magisk.
Click to expand...
Click to collapse
Yeah, forgot to mention that you can debrand too with this. Np
Viper4android won't work because you need to enable core mode on Magisk(that means no mods will be loaded)

---

then how to make v4a to work?

---

wait for the stable v13 magisk

---

Hello,
Actually I have a P10 with build number : VTR-L09C530B122, could I follow the guide with the Huawei P10 B153 Nougat Update [Europe] ?
Thanks for the reply

---

christrodr said:
Hello,
Actually I have a P10 with build number : VTR-L09C530B122, could I follow the guide with the Huawei P10 B153 Nougat Update [Europe] ?
Thanks for the reply
Click to expand...
Click to collapse
That means to rebrand to C432, if you wish to do that you can.

---

MusicHeat said:
That means to rebrand to C432, if you wish to do that you can.
Click to expand...
Click to collapse
Thank you,
By rebranding, I suppose you mean to change the operator on the phone or I'm wrong ?

---

christrodr said:
Thank you,
By rebranding, I suppose you mean to change the operator on the phone or I'm wrong ?
Click to expand...
Click to collapse
Yes

---

MusicHeat said:
Yes
Click to expand...
Click to collapse
Is the C432 an unbranded one ?

---

MusicHeat said:
Yes
Click to expand...
Click to collapse
Let me know if you are going to rebrand

---

christrodr said:
Is the C432 an unbranded one ?
Click to expand...
Click to collapse
Either orange, either unbranded don't know for sure

---

MusicHeat said:
Either orange, either unbranded don't know for sure
Click to expand...
Click to collapse
So to be sure I have to do nothing...
Thank you.

---

christrodr said:
So to be sure I have to do nothing...
Thank you.
Click to expand...
Click to collapse
You can use another method to stay on the same brand.

---

MusicHeat said:
NEVER REBOOT YOUR PHONE WITH MAGISK HIDE ENABLED,IT WOULD BE IMPOSSIBLE TO UNLOCK YOUR DEVICE WITHOUT FORMATTING DATA THROUGH TWRP!!!
Click to expand...
Click to collapse
Can you explain why this does not work? (is only a P10 problem right?)
I gave up on TWRP/Magisk on my P10 Plus because of this
I never figured out why, but guessed it had to do with the encryption of the data partition
I was going to look at it again once TWRP could do a full backup (including /Data)
I'm currently on stock and it sucks... Did burn my fingers with FRP lock on a phone that couldn't boot to Android... And recovery2 (eRecovery) overwritten by flashing TWRP over it... Not feeling adventurous until TWRP is fully working ?

---

evalu8t0r said:
Can you explain why this does not work? (is only a P10 problem right?)
Click to expand...
Click to collapse
I don't have much to say but twrp(for VTR and VKY) are both in beta i believe and also, i have problems with data encryption too on twrp.

---

Can i download it ? where ?

---

evalu8t0r said:
Can you explain why this does not work? (is only a P10 problem right?)
I gave up on TWRP/Magisk on my P10 Plus because of this
I never figured out why, but guessed it had to do with the encryption of the data partition
I was going to look at it again once TWRP could do a full backup (including /Data)
I'm currently on stock and it sucks... Did burn my fingers with FRP lock on a phone that couldn't boot to Android... And recovery2 (eRecovery) overwritten by flashing TWRP over it... Not feeling adventurous until TWRP is fully working ?
Click to expand...
Click to collapse
im burnin right now with a p10 vtr-lo9 with bootloop and frp lock. only accesible with vol.down and usb while boot mthod. but stuck cause all flash or update commands stuck in command not allowed..
how you fix it?

---

Does this guide also work for the P10 Lite?

---

1987yeah said:
Does this guide also work for the P10 Lite?
Click to expand...
Click to collapse
Don't think so.