Here i wanna share my newest achievment with you.
I just found the Android O brunch in aosp sources and tried to build it for raspberry Pi3 you can download my images and test it youself
https://www.androidfilehost.com/?w=files&flid=195409
KERNEL SOURCES : https://github.com/peyo-hd/kernel_rpi
nice
I have just to put the files on the SD card and it will boot?
How's the rom?
Does it work?
Could you provide a installation manual or some instructions
After downloading files how to flash it or install it on sdcard
@J0SH1X Im not a developer, just a long time lurker over xda,
maybe i'm doing this wrong ? wrote the two images and copied the contents on the third, got a black/blank screen
Previously was with androidthings and it did boot up but as I said, Im just another noob so I couldnt really manage to sideload Gapps successfully, started with nova but the screen glitched out
Am I missing something ? Did you manage to get it running ?
Will try rewriting the images again tomorrow and hope the results change
thanks for sharing !
Bnjalal said:
@J0SH1X Im not a developer, just a long time lurker over xda,
maybe i'm doing this wrong ? wrote the two images and copied the contents on the third, got a black/blank screen
Previously was with androidthings and it did boot up but as I said, Im just another noob so I couldnt really manage to sideload Gapps successfully, started with nova but the screen glitched out
Am I missing something ? Did you manage to get it running ?
Will try rewriting the images again tomorrow and hope the results change
thanks for sharing !
Click to expand...
Click to collapse
Yeah it boots up just fine for me
Gesendet von meinem LG-H870 mit Tapatalk
OK, reporting back, in case any one was curious, Its in an early stage, booted up just like OP said
Settings didnt work for me(crashed), web view shell is just a blank page and an error message displayed (another crash)
Kodi installed using adb and works after the second try, occasional flickers here and there, youtube in kodi gave me a strange message (quota exceeded or something like that)
Will try installing Gapps but I dont think it will be of any use given that its in an early stage
For those who asked for instructions (hope OP wont mind)
I used ubunto on VM, gparted, made 4 partitions, wrote the system image to one, and the boot.zip folder simply extracted and copied its contents to boot partition and thats it (basically got instructions from another thread but was hoping for more usability from this version) Im sure others who are more seasoned and experienced will benefit from what the OP supplied but for noobs like me, I guess i'll remain a lurker for a few more years
Ill continue playing around and if theres anything new, ill update this post and maybe gain some knowledge
Is swap available with kernal?.. I'm sure we will need swap to run everything without crashes. On the Nexus player it uses much of the 1gb of ram. With the pi only having half of that we will surely need swap. A 1 app open limit would help also. Can someone post build.prop?
J0SH1X said:
Yeah it boots up just fine for me
Gesendet von meinem LG-H870 mit Tapatalk
Click to expand...
Click to collapse
could you take a sdcard image with win32diskimager or on linux? a lot of people having trouble about installation. It would be great.
Ist there a way to make this for the Raspberry Pi 2, i would test it?
Gesendet von meinem SM-G930F mit Tapatalk
RPI
Ahoj prosím tě dej návod na instalaci gapps
Hi, please give us instructions on installing the gapps
J0SH1X said:
Here i wanna share my newest achievment with you.
I just found the Android O brunch in aosp sources and tried to build it for raspberry Pi3 you can download my images and test it youself
https://www.androidfilehost.com/?w=files&flid=195409
KERNEL SOURCES : https://github.com/peyo-hd/kernel_rpi
Click to expand...
Click to collapse
Is this something that's still being actively worked on? I've been screwing around with rpi3 boards a lot lately and am looking to contribute to the Android builds, but I'm not taking it on by myself if everyone else has already given up.
I'm an experienced Android developer, though I've been inactive for a while (ime a lot of XDA users get pretty entitled and think you owe them continued support / ROMs, so I dropped my projects. )
Let me know if you or anyone reading this is interested in collaborating. Android on the rPi is definitely worth some tinkering in my opinion, though my main interest is a pi-based Android phone rather than a T.V box (I've got a touch screen kit + GSM module)
Restl3ss said:
Is this something that's still being actively worked on? I've been screwing around with rpi3 boards a lot lately and am looking to contribute to the Android builds, but I'm not taking it on by myself if everyone else has already given up.
I'm an experienced Android developer, though I've been inactive for a while (ime a lot of XDA users get pretty entitled and think you owe them continued support / ROMs, so I dropped my projects. )
Let me know if you or anyone reading this is interested in collaborating. Android on the rPi is definitely worth some tinkering in my opinion, though my main interest is a pi-based Android phone rather than a T.V box (I've got a touch screen kit + GSM module)
Click to expand...
Click to collapse
If you can live with crappy hw acceleration that just will never work then happy building
Gesendet von meinem LG-H870 mit Tapatalk
@takatuka291
hello friend, I want to buy a RPI 3if i believe to install Android 7.1 or over... Did you really try to install?
mkpln said:
@takatuka291
hello friend, I want to buy a RPI 3if i believe to install Android 7.1 or over... Did you really try to install?
Click to expand...
Click to collapse
you can but in my opinion it's not the really stable for daily use. I'm suggesting to you buy an asus tinker board for a stable android usage. -which can easily find for extra bucks in our country- (if you interest i can send a link where you can find cheapest)
takatuka291 said:
you can but in my opinion it's not the really stable for daily use. I'm suggesting to you buy an asus tinker board for a stable android usage. -which can easily find for extra bucks in our country- (if you interest i can send a link where you can find cheapest)
Click to expand...
Click to collapse
thank you @takatuka291
I know Asus Tinker Board, but i think it's expensive for me and i'm not so experienced yet...
I found a Raspberry Pi 3 on www.letgo.com , it's used (secondhand)and 100 TL.. Do you think me buy it?
mkpln said:
thank you @takatuka291
I know Asus Tinker Board, but i think it's expensive for me and i'm not so experienced yet...
I found a Raspberry Pi 3 on www.letgo.com , it's used (secondhand)and 100 TL.. Do you think me buy it?
Click to expand...
Click to collapse
it's reasonable for that price but you must check some daily use videos on few youtube channels like geektillithertz or etaprime cause they explain what you can expect from that card with android and some other linux distros. good luck with your pi!
Restl3ss said:
Is this something that's still being actively worked on? I've been screwing around with rpi3 boards a lot lately and am looking to contribute to the Android builds, but I'm not taking it on by myself if everyone else has already given up.
I'm an experienced Android developer, though I've been inactive for a while (ime a lot of XDA users get pretty entitled and think you owe them continued support / ROMs, so I dropped my projects. )
Let me know if you or anyone reading this is interested in collaborating. Android on the rPi is definitely worth some tinkering in my opinion, though my main interest is a pi-based Android phone rather than a T.V box (I've got a touch screen kit + GSM module)
Click to expand...
Click to collapse
Sorry I'm a little late to this post.
I'm interested in building an Android TV build for RPi3/RPi2 with working Chromecast & Android TV remote
Currently, I'm exploring a 7.1.2 ROM
Related
The good old Smiley, to make the reading happier:
I am looking for suggestions.
What could I use my Lapdock for, now that I made the switch to CyanogenMod?
Is there a good solution for making the VNC'ed ARM Ubuntu (look for Ubuntu Installer in the Play Store) work better with the touchpad? Should I sell it? Is there a solution to make remote control apps such as TeamViewer or Splashtop integrate with the Lapdock's keyboard and touchpad? Is there any way to make the device switch to Tablet mode without rebooting? That would be rather interesting to see. By the way, the CM9 ROM I am currently running has got Landscape HDMI working flawlessly, so that should not be an issue...
PS: Please do not ignore this thread. Any suggestions are welcome! (Use your common sense though)
The good old Smiley, to leave a good impression:
Proudly sent from my Atrix™ (call him William) using xda premium
I've struggled with the same question on my photon.. If there's working hdmi rotation on your CM, you can still use it for typing out documents,etc. I also used the mirror mode to watch movies on a larger(than phone) screen in bed.
But eventually I just decided to go back to a blur rom and use ubuntop (which is awesome) while waiting for official ICS and someone hopefully porting ubuntu 12.04 to webtop..
Paranoid Android Rom
I don't understand why canonical hasn't leaked that awesome ubuntudroid system they showed off.. there isn't an easier way to get feedback especially since webtop has died and windows 8 is pushing hard into that whole 'blur the lines' market
Sent from my MB860 using Tapatalk 2
aaron.a;[URL="tel:31083061" said:
31083061[/URL]]I don't understand why canonical hasn't leaked that awesome ubuntudroid system they showed off.. there isn't an easier way to get feedback especially since webtop has died and windows 8 is pushing hard into that whole 'blur the lines' market
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Maybe they are waiting for the unified linux/android kernel 3.4 this would most certainly make it easier to port and updates trivial.
kurtcocaine said:
I've struggled with the same question on my photon.. If there's working hdmi rotation on your CM, you can still use it for typing out documents,etc. I also used the mirror mode to watch movies on a larger(than phone) screen in bed.
But eventually I just decided to go back to a blur rom and use ubuntop (which is awesome) while waiting for official ICS and someone hopefully porting ubuntu 12.04 to webtop..
Click to expand...
Click to collapse
Hello friend, I did the same thing you did, go back to blur....but now I am stuck in the original ubuntop, I mean I can not install all the apps needed to be a fully working laptop....could you help me with it?. I can not understant the steps in the webtop original thread.
you can use it as a gift....for me!....
from the (m)ATRIX...
Cocolopes said:
you can use it as a gift....for me!....
from the (m)ATRIX...
Click to expand...
Click to collapse
Made me laugh out loud!
Sent from my MB860 using Tapatalk 2
WARNING: Massive multi-reply...
kurtcocaine said:
I've struggled with the same question on my photon.. If there's working hdmi rotation on your CM, you can still use it for typing out documents,etc. I also used the mirror mode to watch movies on a larger(than phone) screen in bed.
But eventually I just decided to go back to a blur rom and use ubuntop (which is awesome) while waiting for official ICS and someone hopefully porting ubuntu 12.04 to webtop..
Click to expand...
Click to collapse
Currently, I use it for watching movies as well, and I am looking forward to pairing a Wii Remote and/or a DualShock® 3 to my Atrix™, so that I can play some games such as GTA III and Shadowgun (Max Payne *-*) on the big screen.
I was happy with Blur until the day I ran into that tempting CM9 thread. I did not know what smoothness and responsiveness really were. Blur was the smoothest I thought it could ever get... But I was wrong, and now I have to choose between fluidity and Webtop. :thumbdown:
I actually went back to Blur some months ago, but unfortunately, prolonged use of ICS can cause dependence. Believe it or not, I was pretty happy with Blur. Webtop was working flawlessly, I even had BackTrack installed, but then came the relapse: I could no longer resist to ICS. I am now back to CM9, and with it comes my dilemma...
I am looking for a way to use the Atrix™ as a more desktop-ish platform when docked (especially to the Lapdock). I believe the ideal would be Ubuntu through a local VNC client, or a remote desktop app, I just wish they would play nicer with the keyboard and touchpad...
Basically, something like a key mapper (easy-to-use, I am still unable to figure out WiiMoteController's key mapping scheme) for Lapdock's hardware. We could make a keyboard-powered Ouya!
What still concerns me though, is that games would not be optimized for it e.g. Minecraft PE, games where the camera angle for example, is controlled by dragging the screen, so it would have to be a really powerful, but easy-to-use key mapper, and since you can't have everything in life, I'm afraid I'm asking for much...
Random Canadian said:
Paranoid Android Rom
Click to expand...
Click to collapse
What I understand from your reply is that the Paranoid Android ROM could put my Lapdock back to use. But what is the Paranoid Android ROM? What makes it different from other ROMs? How could it (at least partially) solve my problem?
Please be more specific.
aaron.a said:
I don't understand why canonical hasn't leaked that awesome ubuntudroid system they showed off.. there isn't an easier way to get feedback especially since webtop has died and windows 8 is pushing hard into that whole 'blur the lines' market
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
When the official Ubuntu for Android was announced, even though an Atrix 2 was used for the hands-on part, on the project's official hotsite... It was clearly an Atrix™ 4G standing there on the dock. The differences between our device's design and the Atrix 2's or the Defy's (Defy+'s) are not that obvious, but they are, indeed, noticeable.
You do know what that means, don't you? It means it is almost certain that our device will be on the first batch of officially supported devices!
I don't if the Atrix™ is still there, but if it's not, I can try to find the screenshot I took if you'd like.
I am so proud! :beer:
tomh235 said:
Maybe they are waiting for the unified linux/android kernel 3.4 this would most certainly make it easier to port and updates trivial.
Click to expand...
Click to collapse
What do you mean? It would have to be ported to each supported device anyway, wouldn't it?
Sir_gpm said:
Hello friend, I did the same thing you did, go back to blur....but now I am stuck in the original ubuntop, I mean I can not install all the apps needed to be a fully working laptop....could you help me with it?. I can not understant the steps in the webtop original thread.
Click to expand...
Click to collapse
I have never thought I'd say this but, "Please don't get off-topic". I'd appreciate it if this gets settled in a new thread or via PM.
Anyway, you said "stock UbunTop", I could be wrong, but I think it's either stock or UbunTop, which is a mod born right here on our neighbor forum, Android Development.
If yours is really stock, I suggest you get BackTrack from the BackTop project, I don't it's got aircrack built-in, and I was unable to install it, so unless you're an experienced hacker, don't get too excited with BackTrack's features, but my point is: It is amazingly faster than Webtop, it seems lighter, I used to be able to run more than 3 different apps simultaneously...
If yours is really running UbunTop I'm afraid I cannot assist you, since webtop2sd never worked for me and BackTop and WebtopMOD were the only I could ever manage to get working on my device...
Cocolopes said:
you can use it as a gift....for me!....
from the (m)ATRIX...
Click to expand...
Click to collapse
Hahaha
Nice one. I'll think about it though... Hehe
Sent from my MB860 using xda premium
gabriel_feo said:
What I understand from your reply is that the Paranoid Android ROM could put my Lapdock back to use. But what is the Paranoid Android ROM? What makes it different from other ROMs? How could it (at least partially) solve my problem?
Please be more specific.
Click to expand...
Click to collapse
I can answer this. What he meant is that you should use Paranoid. Paranoid is a rom thats an hybrid of a phone an a tablet, in short words, you can activate tablet mode for some apps, while some other apps still run in phone-mode, for the ease of use.
What I actually meant was to give a name and a designation, which I did.
Google paranoid android rom and you get the website, the website has a much better explanation then I could or should have to provide.
But yes in short it can give you a tablet UI on lapdock.
djluis48 said:
I can answer this. What he meant is that you should use Paranoid. Paranoid is a rom thats an hybrid of a phone an a tablet, in short words, you can activate tablet mode for some apps, while some other apps still run in phone-mode, for the ease of use.
Click to expand...
Click to collapse
Random Canadian said:
What I actually meant was to give a name and a designation, which I did.
Google paranoid android rom and you get the website, the website has a much better explanation then I could or should have to provide.
But yes in short it can give you a tablet UI on lapdock.
Click to expand...
Click to collapse
I did before you guys answered and after I posted my reply, and was about to post an apology to you, my friend (Random Canadian).
Sometimes my brain takes just way too long to figure some things out...
I am sorry.
Anyway, thank you very much! This might just solve it all!
>>>>> But even if it works for me, please don't stop sharing your ideas! <<<<<
Sent from my MB860 using xda premium
gabriel_feo said:
I did before you guys answered and after I posted my reply, and was about to post an apology to you, my friend (Random Canadian).
Sometimes my brain takes just way too long to figure some things out...
I am sorry.
Anyway, thank you very much! This might just solve it all!
>>>>> But even if it works for me, please don't stop sharing your ideas! <<<<<
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
So no gift for me? ... hahaha... just a joke... glad you solve it...
from the (m)ATRIX...
Is it possible to get paranoid android on the lap dock in native resolution?(1376)
http://www.jonobacon.org/2012/10/26/ubuntu-core-on-the-nexus-7/
Looks like we might have a good chance at a good stable build of ubuntu.Since the nexus 7 shares almost all the main components with our prime.
Sent from my SGH-I747 using xda premium
zanzee said:
http://www.jonobacon.org/2012/10/26/ubuntu-core-on-the-nexus-7/
Looks like we might have a good chance at a good stable build of ubuntu.Since the nexus 7 shares almost all the main components with our prime.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Fingers crossed !!
Lilstevie has been working on a version but its very very secretive and i'm not sure he has much time to do it now.
sounds good. can't wait to have it :fingers-crossed:
that would be great to have Ubuntu running naively on the prime!!
I can't wait. Running with chroot and vnc is not the same and it gets sluggish
Danny-B- said:
Fingers crossed !!
Lilstevie has been working on a version but its very very secretive and i'm not sure he has much time to do it now.
Click to expand...
Click to collapse
you are confusing secretive with lacking in time. Some things don't get shared, because otherwise everyone bugs me about it, and the little time I do have for things ends up being eaten up by those people. Other things don't get shared because they are simply tests that may or may not even pan out.
lilstevie said:
you are confusing secretive with lacking in time. Some things don't get shared, because otherwise everyone bugs me about it, and the little time I do have for things ends up being eaten up by those people. Other things don't get shared because they are simply tests that may or may not even pan out.
Click to expand...
Click to collapse
Naa i appreciate your busy matey, i know your at uni and doing other things its just whenever anyone asks about the Ubuntu project its usually met with silence.
I honestly think you should start your own thread about your project and update whenever you have the time etc ... i know there are some members that just want want want, but theres plenty that would support your work and be greatful that your just trying your best ... hey no one else can do it !
My comment wasnt ment to be a flame, i'm patiently waiting myself for anything you can come up with, its just sometimes i'd love to know how far your getting etc
tbh i've been desperate to get ubuntu on this thing since i bought it... now i've bought a new laptop, i barely use it anymore.
Danny-B- said:
Naa i appreciate your busy matey, i know your at uni and doing other things its just whenever anyone asks about the Ubuntu project its usually met with silence.
I honestly think you should start your own thread about your project and update whenever you have the time etc ... i know there are some members that just want want want, but theres plenty that would support your work and be greatful that your just trying your best ... hey no one else can do it !
My comment wasnt ment to be a flame, i'm patiently waiting myself for anything you can come up with, its just sometimes i'd love to know how far your getting etc
tbh i've been desperate to get ubuntu on this thing since i bought it... now i've bought a new laptop, i barely use it anymore.
Click to expand...
Click to collapse
I didn't interpret what you said as a flame, I was just "going on record" so to speak The development cycle is rather unique due to the device specificities so I have been avoiding creating a new thread so I can keep focused on that. I will be creating a thread soon(tm) for a preview build though (no eta).
lilstevie said:
I didn't interpret what you said as a flame, I was just "going on record" so to speak The development cycle is rather unique due to the device specificities so I have been avoiding creating a new thread so I can keep focused on that. I will be creating a thread soon(tm) for a preview build though (no eta).
Click to expand...
Click to collapse
This shouldn't be too hard I hope. Considering the prime and n7 share almost everything. The rear cam/keyboard and microsd might be issues. But the kernel may just pickup the cam/microsd.
zanzee said:
This shouldn't be too hard I hope. Considering the prime and n7 share almost everything. The rear cam/keyboard and microsd might be issues. But the kernel may just pickup the cam/microsd.
Click to expand...
Click to collapse
no, they are not similar devices, they share a cpu/gpu combo, that is pretty much the end of it.
One question it always bug me. When canonical first started to talk about their project some people mention it would be like an app you download out of the market. But if a new kernel is needed, that's not possible, right? The pad would even need to be unlocked.
ScriptJunkie said:
One question it always bug me. When canonical first started to talk about their project some people mention it would be like an app you download out of the market. But if a new kernel is needed, that's not possible, right? The pad would even need to be unlocked.
Click to expand...
Click to collapse
Most likely yes. Most users looking for Ubuntu are probably unlocked considering that usually flashing anything besides an update requires unlocking.
ScriptJunkie said:
One question it always bug me. When canonical first started to talk about their project some people mention it would be like an app you download out of the market. But if a new kernel is needed, that's not possible, right? The pad would even need to be unlocked.
Click to expand...
Click to collapse
Canonical said no such thing, ubuntu-on-android is something entirely different to this, it works much like splashtop does on the atrix. They also never said that end users would be able to access it from the play store, it requires being integrated by OEMs.
lilstevie said:
Canonical said no such thing, ubuntu-on-android is something entirely different to this, it works much like splashtop does on the atrix. They also never said that end users would be able to access it from the play store, it requires being integrated by OEMs.
Click to expand...
Click to collapse
I wasn't clear, what I meant is that after canonical's anoncement I heard rumors from random people talking about that. And that always bugged me cuz I couldn't figure out how would they pull that off. But what u said makes more sense.
Please check from this page on...thanks to TacoNikky and the developers..
http://forum.xda-developers.com/showthread.php?p=59819425
As we are up to kitkass 5.1 V22 now...
To keep up with the speed in which Tim does his Roms and the other developments (which are all good for TF201 Owners) and the support from other developers for Kernel creations and general Tweaks to keep this aging machine kicking.
This Thread is a place for those that are flashing and want to flash the TF300 version of Kitkiss with the Compatibility pack.
I am only doing this as there seems to be a lack of support from multi developers for this machine and so out of respect for the work that is done across the entire TF range. There should be no confusion on where to place your questions and hopefully get some answers to the versions of KATKISS, Kernels and Tweaks that others are doing to get the most of these once expensive little pieces of equipment.
Link to Tims rom Thread
DO not post in Tims TF300T thread unless it is TF300 related..respect the TF300 crew as the rom is developed and tested on their machines not the TF201,
if you do..expect to be flamed as you have been warned...
http://forum.xda-developers.com/showthread.php?t=2932783
Link to Hardslogs 5.0 kernal Thread
http://forum.xda-developers.com/showthread.php?p=49251081
Download the 5.0 version
As usual, a HUGE thanks goes to the time and effort that so many developers put in to the coding and checking of Googles base code to bring users the latest and greatest improvements to the Android system. With out you these machines would be gathering dust.!!!!!
thanks to @timduru, @hardslog, @lj50036
And a Shout out to XDA team and mods for keeping this the best place to come and hang out..
GF's and wife's just don't get it do they...
when you tell them you are spending so much time on XDA writing and reading, they cant believe its only a Rom site and not a hot XXXX site.. raff raff...[emoji1]
My experience so far.. Tims 15b and Hardslogs 5.0 Kernel.
Coming from 14b in the other thread with F2F formated data I had problems flashing Tims 15b..
Had to reformat the data partition and go for a good clean wipe and everything and start fresh.
This is the 2nd day and so far its cruzing along nicely.. I need to leave the tablet and dock off the charger tonight to see how the Batt drain is..
Issues that I have experienced...
- BT - Connects once and plays but if you stop say the movie and try to go back you lose sound...
- Screen tearing - As in tapatalk while writing in to posts.. will get screen tear.. slight jitter across the screen..
- TB wont restore into the F2Fs formatted machine - on mine it always gets stuck - have oipened a ticket with TB crew and will post back if there is a workaround and or fix on this..
- Flashing a TB made backup Zip takes forever to restore, but does work.. mine is around 280 apps and I just leave it until its done.. In recovery it will tell you that it is going to reboot in 5 seconds but mine doesn't, so I leave it for a while and then do a shut down and start.. it then runs with the Blue upgrading bar and the apps are installed. Note I dont restore "Data" just the apps..
My setup
Tims Katkiss 15b
Data ext4
Hardslogs 5.0 kernel
Tweaks..
Seeder.apk - set to aggressive
Home Launcher - Apex Pro
Apps 270 give or take a few..
Settings..
O/C 1700 min..370
Performance
Scheduler Noop
and this one for upgrades and FAQ's
Özgür said:
I believe that the instructions are good for coming from stock, but as I was using Josh's CROMBi-kk, they were really not guiding.
This is how I installed on my TF201, coming from 4.4.4 (CROMBi-kk)
* Updated TWRP to 2.8 via "DEV branch" of @ne0zone75 http://forum.xda-developers.com/showthread.php?t=2772093): I put it into USB Flash and updated within TWRP, using Install function
* Maybe that was not all needed, but I used F2FS to utilize the performance improvements mentioned by @dgcruzing. And to be on the safe side, I formatted "data" partition to F2FS, via Wipe->Advanced. Afterwards I followed guidance from @lj50036 : Go to Wipe////Format Data////Type yes. I waited all to be formatted and then checked once more that data partition was F2FS formatted.
* I copied @lj50036 KatKiss-5.0_TF201T_014b_signed.zip to home directory on my Ubuntu and pushed via the code:
adb push KatKiss-5.0_TF201T_014b_signed.zip /sdcard
Click to expand...
Click to collapse
Note: If you are on Ubuntu, you need to start adb first as root (via sudo), then you can continue as normal user.
* Installed the ROM via Install menu of TWRP, in SDCARD, as pushed in previous step.
* Installed the Google Apps for Lollipop from this thread by @drewwalton19216801.
* When I wanted to reboot the device, TWRP asked if I wanted to install SuperSU, I did by swiping .
On CROMBi-kk I had used ext4 and my TF201 was booting real slow, around 10 minutes.
Now it boots lightning fast, less than 1 minute.
Thanks a lot to all contributors, mentioned and forgotten.
I hope that this post helps other people install this ROM.
Özgür
Click to expand...
Click to collapse
pastorbob62 said:
You only need to format your Data partition to f2fs if you want to use f2fs. DO NOT format any other partitions f2fs. F2FS does provide enhanced performance overall but it is not necessary to use this ROM.
After booting into TWRP and doing a full wipe/factory reset, go back to Home, select "Wipe", "Advanced Wipe", check the Data partition ONLY, select "Repair or Change File System", "Change File System", select F2FS then format. Then reboot into TWRP and flash the ROM. It will select the proper file system upon installing.
Click to expand...
Click to collapse
das chaos said:
Just flashed the new TWRP 2.8.3.0 from here:
http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.8.3.0-tf300t.blob
... and it works fine with my tf201 (and lollipop).
Click to expand...
Click to collapse
master1988 said:
Hey guys,
deleting 10kat seems to solve the reboot problem.
I did a factory reset and started with a fresh install of katkiss v.14b, gapps and compatibility pack. Before reboot I used file manager of trwp and deleted 10kat.
Playing around with the tablet more than an hour now, no reboot [emoji106]
No final prove but I think this is the right direction to look for...
Just a big THANK YOU to all of you for this great, friendly and helpful community [emoji122]
Click to expand...
Click to collapse
This one is a must if you are getting reboots, I was having a few and since I have got rid of this script, it has settled.. I haven't had time to look in to the script and see if it can be tweaked for the TF201T so at this stage its better to delete it..
compact_wisdom said:
Can anybody confirm the Chromecast problem with version 15?
IF not, I'll flash it and try out myself
---------- Post added at 07:19 PM ---------- Previous post was at 06:30 PM ----------
Ok, I tried it out, Chromecast works for me...
Click to expand...
Click to collapse
Well it looks like you want the Q&A for katkiss, Its all yours ....
Thx Josh
Bit of a shame its come to this, Josh was offering a good version with his modifications making the compatibility with our TF201's better. The f2fs thing he did was beneficial too.
Yep really sad, josh 14B version was very solid, we where getting a better compatibility for our tablets and with f2fs speed was even more noticeable, thank you Josh for your efforts and good luck with the new thread dgcruzing, this post will probably be deleted but just wanted to say something.
lj50036 said:
Well it looks like you want the Q&A for katkiss, Its all yours ....
Thx Josh
Click to expand...
Click to collapse
Josh..
yes your post is true, I and many others just want the best most stable Rom for this machine..
My advise is to step back from the forums for a while as you seem to be a little to quick to jump on people with slightly snarky comments..(not just in the TF201 forum but across others too..remember your knowledge base is deepr then a normal user, As is mine so we tend to forget that the "public, blebs and general mums and dads dont want to dig as deep as we do)
Note : This thread is out of respect for you and also Tim..
In your thread you have done a good job of supplying a modded version, I take my hat off to you..And as stated you only want people to ask questions in that thread about that modded version..also you have stated that you are stepping back to concentrate on your other work..
Which once again all I have is respect.
But its not a debatable request, you have made your thread just on your modded version and so the title should reflect this, as stands, it makes people uncomfortable asking questions about Tims version and turns the thread into a bit of a **** fight as really your opening OP is not clear on these points...
Also as I have HUGE respect for Tim and the work he has done and have been on his work from early TF101 days.. I felt that the TF201 users should also benefit from others inputs across the board and not be locked into just one thread on the available Roms that are out there..
Really I shouldn't have to answer a comment like yours and you shouldn't have posted it as really all this thread is doing is repecting your wishes..
Can't have your cake and eat it as well as they say..
OK..just for clarification...
As a community that gets both inputs and contributions by members I would expect this thread to be about the Topic in the OP..
Any user on any Lollipop ROM can feel free to ask questions and those that are playing around on this machine can give their feed back..
So keeping it on track..
I just formatted data back to F2Fs...she's a tempimental little machine this one.. Even thru google play is updating it with the backuped apps..it doesn't want to open google play.. Thus looks like I am going to have to flash gapps again..
You would think that once you format and restart..as it goes thru the new startup procedure as in asks you your Google account details that it would have everything ready to go..
But it seems there is something missing.. I do see that Google settings is not installed as such..even through its sitting in my apps section within the launcher..and looking into settings there is .
Google account manager
Google backup transport
Google contacts sync
Google one time init
Google partner setup
Google play store
Google play services
Google search
Google services frame work..
So maybe its the missing Google settings app that causes this..?
Not to mind as will flash the gapps package and let it run through again..if it settles will add this to the FAQ..
edit: a reflash of gapps and a resign in via browser seems to have sorted it..Google settings app is working..
Stargazer Optimus said:
Bit of a shame its come to this, Josh was offering a good version with his modifications making the compatibility with our TF201's better. The f2fs thing he did was beneficial too.
Click to expand...
Click to collapse
Yes..agree...as this machine doesn't have a lot of support for it so any support is a good thing..
Only reason I have one is in picked it up for $50 and its actually feels like a nice little unit..so sometime soon in the future someone around me is going to get a good little machine that is running a stable lollipop version.. Who's it is I don't care..
dgcruzing said:
Josh..
yes your post is true, I and many others just want the best most stable Rom for this machine..
My advise is to step back from the forums for a while as you seem to be a little to quick to jump on people with slightly snarky comments..(not just in the TF201 forum but across others too..remember your knowledge base is deepr then a normal user, As is mine so we tend to forget that the "public, blebs and general mums and dads dont want to dig as deep as we do)
Note : This thread is out of respect for you and also Tim..
In your thread you have done a good job of supplying a modded version, I take my hat off to you..
And as stated you only want people to ask questions in that thread about that modded version..also you have stated that you are stepping back to concentrate on your other work..
Which once again all I have is respect.
its not a debatable request.. But it makes people uncomfortable asking questions about Tims version and turns the thread into a bit of a **** fight as really your opening OP is not clear on these points...
Also as I have HUGE respect for Tim and the work he has done and have been on his work from early TF101 days.. I felt that the TF201 users should also benefit from others inputs across the board and not be locked into just one thread on the available Roms that are out there..
Really I shouldn't have to answer a comment like yours and you shouldn't have posted it as really all this thread is doing is repecting your wishes..
Can't have your cake and eat it as well as they say..
OK..just for clarification...
As a community that gets both inputs and outs by members I would expect this thread to be about the Topic in the OP..
Any user on any Lollipop ROM can feel free to ask questions and those that are playimg around on this machine can give their feed back..
So keeping it on track..
I just formatted data back to F2Fs...she's a tempimental little machine this one.. Even thru google play is updating it with the backuped apps..it doesn't want to open google play.. Thus looks like I am going to have to flash gapps again..
You would think that once you format and restart..as it goes thru the new startup procedure as in asks you your Google account details that it would have everything ready to go..
But it seems there is something missing.. I do see that Google settings is not installed as such..even through its sitting in my apps section within the launcher..and looking into settings there is .
Google account manager
Google backup transport
Google contacts sync
Google one time init
Google partner setup
Google play store
Google play services
Google search
Google services frame work..
So maybe its the missing Google settings app that causes this..?
Not to mind as will flash the gapps package and let it run through again..if it settles will add this to the FAQ..
edit: a reflash of gapps and a resign in via browser seems to have sorted it..Google settings app is working..
Click to expand...
Click to collapse
If you say so.....
I just wanted out as I am not going to have time to do anything for this rom .....
Thx Josh
lj50036 said:
If you say so.....
I just wanted out as I am not going to have time to do anything for this rom .....
Thx Josh
Click to expand...
Click to collapse
Josh,
All good, look forward to playing with anything that you put out..
As I am not beholding to anyone Rom or Kernel..As is most users, we are a fickle lot.
But my comments still stand, as I flash and follow a large number of developers and understand that it can get frustrating as a developer\rom supporter to field the same basic questions time and time again.
Wish you well and just think of this thread not as a competing thread but as a thread that takes a bit of stress of your reading and answering.. As I see you have spent considerable time answering posts across threads.. and would love to see you keep doing that for the benefit of all those that still hold one of these machines..
dgcruzing said:
Josh,
All good, look forward to playing with anything that you put out..
As I am not beholding to anyone Rom or Kernel..As is most users, we are a fickle lot.
But my comments still stand, as I flash and follow a large number of developers and understand that it can get frustrating as a developer\rom supporter to field the same basic questions time and time again.
Wish you well and just think of this thread not as a competing thread but as a thread that takes a bit of stress of your reading and answering.. As I see you have spent considerable time answering posts across threads.. and would love to see you keep doing that for the benefit of all those that still hold one of these machines..
Click to expand...
Click to collapse
You dont own a 201 ?
lj50036 said:
You dont own a 201 ?
Click to expand...
Click to collapse
4 TF101's in the family,
3 TF300T's
1 TF201T brought for $50 guy had soft bricked it and didn't know what to do..
1 Nexus 10
1 S3
1 S5
1 ATV1200
1 Chromecast doogle
1 HTV Evo used as a remote..
all hooked up to a Synology Ds212j box for XBMC
while over xmas we had a WD my cloud and a Seagate central hooked up..
so yes, a Flashaholic
dgcruzing said:
4 TF101's in the family,
3 TF300T's
1 TF201T brought for $50 guy had soft bricked it and didn't know what to do..
1 Nexus 10
1 S3
1 S5
1 ATV1200
1 Chromecast doogle
1 HTV Evo used as a remote..
all hooked up to a Synology Ds212j box for XBMC
while over xmas we had a WD my cloud and a Seagate central hooked up..
so yes, a Flashaholic
Click to expand...
Click to collapse
OK so you got this no problem ..... :good:
lj50036 said:
OK so you got this no problem ..... :good:
Click to expand...
Click to collapse
yes, there shouldn't be any animosity as stated,
its a thread to take people off the original TF300T threads and to take them away from your modded version..
too much drama going for such little return so its better to give people an out and let them banter elsewhere..
Damn, I flashed the v15 for the tf300 with the compatibility pack, and it just didn't run as well on my device as Josh's tf201 v14b. Looks like i'm SOL unless Tim's tf300 versions get more compatible somehow. .... and just when this POS was starting to show some life.
dgcruzing said:
yes, there shouldn't be any animosity as stated,
its a thread to take people off the original TF300T threads and to take them away from your modded version..
too much drama going for such little return so its better to give people an out and let them banter elsewhere..
Click to expand...
Click to collapse
Drama what drama, I was only asking ......
I will show myself to the door ..... LOL
Thx Josh
lj50036 said:
Drama what drama, I was only asking ......
I will show myself to the door ..... LOL
Thx Josh
Click to expand...
Click to collapse
No.. dont take that personally.. it was not aimed at you..
but the tone of the thread in general the way it was going..
We can agree there is a lack of support for this device among developers..
and at this stage there is no dedicated single developer with a rom that they can call their own..
and as the TF range is not supported by updates by Asus then it stands to reason what little support in the forums will be used..
So all good..
this is a win/win situation for TF201T users..
and those that want to explore the new found freedom of flashing and making this tablet at least useable..
As I have stated before. .. I kinda like it.. and when I had it on 14b I had it stable..
its just that I am a sucker for punishment that I like to look ahead at where it could be...
and while I do that I dont want other posters giving me a hard time where to post..
thus....this thread has been created..
huskerkate said:
Damn, I flashed the v15 for the tf300 with the compatibility pack, and it just didn't run as well on my device as Josh's tf201 v14b. Looks like i'm SOL unless Tim's tf300 versions get more compatible somehow. .... and just when this POS was starting to show some life.
Click to expand...
Click to collapse
yes, I am still playing with it over the next few days... could even end up back on 14b..
As we know.. not all machines are the same..
my most stable was on Tims V14b with compatibility before I played around with F2Fs..
So there could be a slight difference in chips, screens that makes one work better than the other on the different versions..
Dear I ask.. if Josh wants to answer...
What actually is the difference between the two?
As for me so far I would say..
its only script tweaks to reflect that its infact a TF201T and deletion of the .int script..
As Basic Rom is same and Kernel is Same.. ?
As noted I am on the Grimlock 5.0 kernel now... so any upgrade by hardslog is going to be a bonus
Does anyone here have the necessary skills and experience to produce a compatibility pack to give a similar result to lj's 14b ROM?
From going through his thread I found the following three posts about changes he made:
http://forum.xda-developers.com/showpost.php?p=57235985&postcount=10
http://forum.xda-developers.com/showpost.php?p=57266435&postcount=30
http://forum.xda-developers.com/showpost.php?p=57644092&postcount=103
Would the sensible first steps be to start with the Grimlock 5.0 Kernel and apply the changes like Josh did for his versions?
TF201 Reverse Axis
I got a new screen for my TF201 and it is the model that it seems all of eBay has which has the reverse axis issue. I know there's a way to fix it which would mean having to recompile the kernel with the fix in the touchscreen driver, but I was just wondering if anyone had done it for themselves and they could post their kernel or driver here. It's usable with the keyboard/mouse but I didn't get this for a small laptop.
Question: How to root on 14b with Grimlock 5 kernel
Now 14b (KatKiss Q&A TF201T ) thread is closed, so we cannot post there.
However, I have a question my configuration: 14b and dirty flashed Grimlock 5.0 kernel (I did the same @dgcruzing wrote there)
Now I lost root and don't know how to root again. I tried to use "Superuser-3.1.3__46___-efghi-signed_Final", which failed at TWRP.
My TF201 works fine, stable and fast, so I will stay at 14b+Grimlock 5, but would like to have root access to have TitaniumBackup working, for example.
Could you tell me how to root it again?
Thanks in advance,
Özgür
Folks I am going to try N push as many roms out for this device as I can, only because we didn't have a lot of optional roms with kk, but now that I have learned more I will do the best I can. If anyone here wishes to take over one or some of my threads and maintain the device just let me know Please? I'm in NO way trying to push anyone out, I just want there to be options for you! My Candy5 rom is mine tho, SlimLP as well, I'm not willing to let them go just yet. Also as soon as PacRom has released their nightlies I will release my Pac build for this device! Again, if you wish to build, I will turn my thread over to you because I can't maintain every thread/rom as often as I'd like. This is just a heads up so everyone knows what to look forward to.
gimmeitorilltell said:
Folks I am going to try N push as many roms out for this device as I can, only because we didn't have a lot of optional roms with kk, but now that I have learned more I will do the best I can. If anyone here wishes to take over one or some of my threads and maintain the device just let me know Please? I'm in NO way trying to push anyone out, I just want there to be options for you! My Candy5 rom is mine tho, SlimLP as well, I'm not willing to let them go just yet. Also as soon as PacRom has released their nightlies I will release my Pac build for this device! Again, if you wish to build, I will turn my thread over to you because I can't maintain every thread/rom as often as I'd like. This is just a heads up so everyone knows what to look forward to.
Click to expand...
Click to collapse
I would love to help you maintain these roms, I''ve always wanted to build/maintain a rom because it seems so interesting. But sadly my laptop doesnt support VM virtualbox
TeamAndroid14 said:
I would love to help you maintain these roms, I''ve always wanted to build/maintain a rom because it seems so interesting. But sadly my laptop doesnt support VM virtualbox
Click to expand...
Click to collapse
Know how you feel man. I need 64 bit computing to build and only one of my dinosaurs runs 64 bit but its sadly lacking in the memory to complete the builds. I came thiiiiiiis close to my test build completing. So I just flash other people's efforts.
Sent from my SAMSUNG-SGH-I717
TeamAndroid14 said:
I would love to help you maintain these roms, I''ve always wanted to build/maintain a rom because it seems so interesting. But sadly my laptop doesnt support VM virtualbox
Click to expand...
Click to collapse
developweb said:
Know how you feel man. I need 64 bit computing to build and only one of my dinosaurs runs 64 bit but its sadly lacking in the memory to complete the builds. I came thiiiiiiis close to my test build completing. So I just flash other people's efforts.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Well if ever either of you, or both, become ready to compile I'd be happy to help you get started. I'll also give away some of my threads. When that time comes just hit me up with a message here or on Hangouts.
My builds are going to be less supported as I do not have the time to maintain so many roms for one device. I'll really help someone get started if they wish but please don't expect updates from all of the roms I have here. You can do this!
gimmeitorilltell said:
My builds are going to be less supported as I do not have the time to maintain so many roms for one device. I'll really help someone get started if they wish but please don't expect updates from all of the roms I have here. You can do this!
Click to expand...
Click to collapse
I'd like to help with this but as my PC is slightly antiquated my last attempt at a build failed. I may try a dual boot with ubunu or bbqlinux so I can max out my limited resources for one more try. Can't say when yet...life keeps getting in the way.
Sent from my SAMSUNG-SGH-I717
developweb said:
I'd like to help with this but as my PC is slightly antiquated my last attempt at a build failed. I may try a dual boot with ubunu or bbqlinux so I can max out my limited resources for one more try. Can't say when yet...life keeps getting in the way.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
I definitely understand about life getting in the way. I have a house full of kids and my android addiction gets in the way at times. Let me know when/if you try to build again and I'll for sure give a hand working out errors and whatnot.
Step one completed. Now have the old Vista dual booting with BBQ Linux. Removed virtualbox client packages as it is installed properly and set it up with a beautiful grub splash. Even defaults to windoz for my wife.
Sent from my SAMSUNG-SGH-I717
developweb said:
Step one completed. Now have the old Vista dual booting with BBQ Linux. Removed virtualbox client packages as it is installed properly and set it up with a beautiful grub splash. Even defaults to windoz for my wife.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
That's one step closer man! If you need any help any where down the line, feel free to give me a shout.
gimmeitorilltell said:
That's one step closer man! If you need any help any where down the line, feel free to give me a shout.
Click to expand...
Click to collapse
Step two done. Built cm10.1 as a test and it is flashed on my phone and working.
BBQLinux apparently works out of box as was said on their thread. First attempt at build stalled out after about 10 minutes complaining of a missing shared object library. Version in folder was one off from the one being asked for. Renamed a symlink to match version number and build completed in about 2 or 3 hours. (64 bit Vista/BBQLinux dual boot with 4GB actual ram and a 12GB swap file)
Sent from my SAMSUNG-SGH-I717
developweb said:
Step two done. Built cm10.1 as a test and it is flashed on my phone and working.
BBQLinux apparently works out of box as was said on their thread. First attempt at build stalled out after about 10 minutes complaining of a missing shared object library. Version in folder was one off from the one being asked for. Renamed a symlink to match version number and build completed in about 2 or 3 hours. (64 bit Vista/BBQLinux dual boot with 4GB actual ram and a 12GB swap file)
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
That's awesome! Great to hear you compiled your first booting build. Congrats to you and hopefully many more booting builds yet to come.
I have a fresh Liquid build if you all wanna check it out? Give this lots of time to boot up, believe me it takes longer than my other builds!! https://www.androidfilehost.com/?fid=23991606952593312
Granted, I'm "late" to the Nexus 6P game, and we have tons of ROMs to choose from. I like to build ROMs too, so, what are we missing? If there's a firmware out there, that you'd like to have on your device, by all means: Post In this Thread
Please, don't ask me to "add/remove features" on an existing project, I'm not going to do "something else" with other peoples work, just ain't right...
NepoRood said:
Granted, I'm "late" to the Nexus 6P game, and we have tons of ROMs to choose from. I like to build ROMs too, so, what are we missing? If there's a firmware out there, that you'd like to have on your device, by all means: Post In this Thread
Please, don't ask me to "add/remove features" on an existing project, I'm not going to do "something else" with other peoples work, just ain't right...
Click to expand...
Click to collapse
Samsung Edge features would be interesting on our phones...
Sent from my Nexus 6P using Tapatalk
[emoji6] first you need too post this in another section!
Sent from my Nexus 6P using XDA-Developers Legacy app
NepoRood said:
Granted, I'm "late" to the Nexus 6P game, and we have tons of ROMs to choose from. I like to build ROMs too, so, what are we missing? If there's a firmware out there, that you'd like to have on your device, by all means: Post In this Thread
Please, don't ask me to "add/remove features" on an existing project, I'm not going to do "something else" with other peoples work, just ain't right...
Click to expand...
Click to collapse
I feel you, when I got the nexus 6p a year back I felt out if the game.
I'm on mobile right now (so it's a bit harder to check but I wonder if we have a sailfishOS or Ubuntu , KDE (or plasma mobile they are calling it)
If I think of anymore I'll. Let you know
Niropa said:
I feel you, when I got the nexus 6p a year back I felt out if the game.
I'm on mobile right now (so it's a bit harder to check but I wonder if we have a sailfishOS or Ubuntu , KDE (or plasma mobile they are calling it)
If I think of anymore I'll. Let you know
Click to expand...
Click to collapse
I would love to try sailfishos! Always intrigued me.
Niropa said:
I feel you, when I got the nexus 6p a year back I felt out if the game.
I'm on mobile right now (so it's a bit harder to check but I wonder if we have a sailfishOS or Ubuntu , KDE (or plasma mobile they are calling it)
If I think of anymore I'll. Let you know
Click to expand...
Click to collapse
crixley said:
I would love to try sailfishos! Always intrigued me.
Click to expand...
Click to collapse
Sailfish OS seems a step in the wrong direction to me. After a little reading, it runs on top of CyanogenMod (I don't mean Lineage), for ported devices. I will look into KDE (Plasma Mobile) later today, need to go to work now...
cmzizi said:
Samsung Edge features would be interesting on our phones...
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
+1 !
What we miss is a truly unique rom.
All of them differ just in de amount of features they have. What would be awesome would be a rom that not only is different, but also looks different.
NepoRood said:
Sailfish OS seems a step in the wrong direction to me. After a little reading, it runs on top of CyanogenMod (I don't mean Lineage), for ported devices. I will look into KDE (Plasma Mobile) later today, need to go to work now...
Click to expand...
Click to collapse
Yes most of those ROM ports run off cm cause of its compatibility with so many devices, that doesn't make it a step in the wrong direction though as it's a completely different OS with repos required from cm that can probably be replaced with their updated lineage fork. Even if not I guarantee people would still use it if it was 7.0 as it's totally new os for people to play with
Niropa said:
Yes most of those ROM ports run off cm cause of its compatibility with so many devices, that doesn't make it a step in the wrong direction though as it's a completely different OS with repos required from cm that can probably be replaced with their updated lineage fork. Even if not I guarantee people would still use it if it was 7.0 as it's totally new os for people to play with
Click to expand...
Click to collapse
CM12 is latest "stable", some folks seem to be kinda working on CM13, but it's still using a lot of CM12 stuff (looking at Github, anyway). Again, this is just for porting to "New" devices. It's been a few months since any repos were updated...
From what I gathered on the KDE site, you need to run MutliROM and get Ubuntu Touch working. Then you can try to port Plasma Mobile, kinda like using the KDE Desktop on your Ubuntu install with a PC. I haven't even looked at Ubuntu Touch yet, lol.
I'll keep doing research, anyone that wants to chip in, feel free :good:
Well I was working on a project long time ago, was not for this device, it was a port for the "Download Booster", when it was cool, and then I failed to do so.
If you can port it to a rom that would be great IMO
Sent from my Nexus 6P using XDA Labs
NepoRood said:
CM12 is latest "stable", some folks seem to be kinda working on CM13, but it's still using a lot of CM12 stuff (looking at Github, anyway). Again, this is just for porting to "New" devices. It's been a few months since any repos were updated...
From what I gathered on the KDE site, you need to run MutliROM and get Ubuntu Touch working. Then you can try to port Plasma Mobile, kinda like using the KDE Desktop on your Ubuntu install with a PC. I haven't even looked at Ubuntu Touch yet, lol.
I'll keep doing research, anyone that wants to chip in, feel free :good:
Click to expand...
Click to collapse
i hear you, i know none of them run off the latest android sources i was just giving suggestions off the top of my head of things i feel people would be interested in seeing for the device.
hopefully you end up finding the right thing for you
Niropa said:
i hear you, i know none of them run off the latest android sources i was just giving suggestions off the top of my head of things i feel people would be interested in seeing for the device.
hopefully you end up finding the right thing for you
Click to expand...
Click to collapse
As stated, I'll keep researching, right now, I'm really enjoying ScrewdAOSP ROM on my 6P
Must be faster.
The "quick send to" feature doesn't work well. I would like to quit Twitter from there and telegram etc don't show the chats towards you send more files, just the last ones that received messages.
Configuration tool of RR is a must have. No ROM acceptable without that.
Porting Plasma Mobile
NepoRood said:
CM12 is latest "stable", some folks seem to be kinda working on CM13, but it's still using a lot of CM12 stuff (looking at Github, anyway). Again, this is just for porting to "New" devices. It's been a few months since any repos were updated...
From what I gathered on the KDE site, you need to run MutliROM and get Ubuntu Touch working. Then you can try to port Plasma Mobile, kinda like using the KDE Desktop on your Ubuntu install with a PC. I haven't even looked at Ubuntu Touch yet, lol.
I'll keep doing research, anyone that wants to chip in, feel free :good:
Click to expand...
Click to collapse
You don't really need to port Ubuntu Touch per se to get a Plasma Mobile port working. Just getting an Ubuntu 16.04 rootfs working should suffice for a base to build on. Additionally, porting Halium components should be enough to get the ball rolling.
I was working on a port of PM with someone else a couple of months ago until Halium started and more stuff started piling up for me. If you want to have some of the files we worked on, PM me.
EDIT: I have a thread about porting non-Android OSes to the Nexus 6P if it piques your interest.