Related
Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Thanks
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
Just wanted to see if I was the only one. Thanks anyway
Possible Solution
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Should I flash using recovery mode ?
Sent from my Micromax A116 using xda app-developers app
adizrox said:
1. Don't keep your mobile on auto-brightness.
2. Go to your WiFi and click on it and then hit the menu button on left and then go to advanced option and turn off WiFi optimization.
This will solve your flickering issue.
======================================
or enable Hardware overlay from developer options.
P.S: I am not experiencing any flickering so these steps haven't been tried by me.. try on your own and reply if it helped.:good::fingers-crossed:
Click to expand...
Click to collapse
Tried it..but it didn't work.. But thanks anyway
Lyyclec extraneus
cmahendra said:
Worth waiting for service center for 4.2 update for your phone. Stop experimenting further and stay on 4.1.2 backup.
WARNING: If you try SP TOOL to flash 4.2 on your phone for some more time, you may LOSE IMEI codes and phone will be literally useless and you need to give it to service center, with a RISK of service rejection coz you rooted it. If you dont know how to unroot and restore stock recovery, you will be in trouble. So keep using 4.1.2 and be safe. Later, dont tell people, no one warned you. Telling you from my own experience.
Click to expand...
Click to collapse
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Screen Blinking
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
hardiktrivedi0612 said:
I feel you bro.. I also have tried to install the 4.2 update like 3-4 times.. Everytime i get the same issue.. But I haven't occured an issue with any other custom roms.. But I have the same issue with tweaked roms.. GOD HELP US:crying:
Click to expand...
Click to collapse
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Sauravh said:
Now, I'm thinking as My phone is less than 30 days old, Should I give it to SVC to upgrade, I'll first flash the stock rom and then give it to svc, So, If they face the blinking issue, may be I could get replacement with updated stock ROM.. But need to find the svc in Noida or nearby
Click to expand...
Click to collapse
:laugh::laugh: But make sure that you properly unroot it first and flash .16 stock rom..
hardiktrivedi0612 said:
Hey guys,
I have tried to upgrade my Micromax A116 to the official update of 4.2 jelly bean. But as soon as i reboot my phone after flashing it using the basic SP tools method, my screen continuously goes on and off. Has anybody else come across this problem? If yes, then can you please share with me the solution? Now i am back to the stock rom of 4.1.2..Any kind of help is appreciated..Thank you..:cyclops: I really want to update it to 4.2.1..
PS: Am i the only one around here who thinks that the stock rom is better than any other custom roms for micromax a116?:laugh:
Click to expand...
Click to collapse
tmohans said:
There are others who reported the same problem. But as of now there doesn't seem to be any solutions as its happening to only some of CHD devices
Click to expand...
Click to collapse
neatearth said:
I am facing the same problem. I tried hardware overlay and auto brightness but no success. I never tried WiFi though. I had flashed my device more than 10 times now.
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:30 PM ----------
Same problem with my handset as well. So far no resolution.
Sent from my Micromax 6 using xda app-developers app
Click to expand...
Click to collapse
neatearth said:
@cmahendra I have read one of your posts where you have mentioned that you had the same problem(Screen Blinking). Did you manage to get over it? Which method did you try to flash. Please share your experience. It will be quite helpful. At present I am planning to try TWRP recovery to flash. I do not know if it will work.... Will keep update.
Click to expand...
Click to collapse
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
Will try it for sure.... Love your work BTW!! keep up the good work:good:
hardiktrivedi0612 said:
Will try it for sure.... Love your work BTW!! keep up the good work:good:
Click to expand...
Click to collapse
Did you try the flickerfix.zip ? Please let me know
---------- Post added at 05:38 AM ---------- Previous post was at 05:30 AM ----------
hottesthunkkush said:
try to flash this file..
this file fixed the issue for some people..
build prop values are stock 4.2
http://d-h.st/L22
Click to expand...
Click to collapse
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
neatearth said:
Did you try the flickerfix.zip ? Please let me know
Sorry haven't got the time yet.. But will surely let you know when i do.
Click to expand...
Click to collapse
neatearth said:
I am using TWRP and right now on 4.1.2 . Can not upgrade to 4.2 due to blinking issue. Should I flash using flickerfix.zip before upgradation to 4.1 or should do after upgrading to 4.2 ? I will use SP lfash tool to upgrade. I will really appreciate if you can provide a step by step guidance.
thanking you
Click to expand...
Click to collapse
Flash 4.2 First then flickerfix.zip
same situation
Sauravh said:
Hello,
I followed the procedure several times.
this saturday I spent the whole day trying to flash 4.2.1 sotck rom on my phone. But, got the same screen blinking issue.
I've TWRP installed and tried the tweaked Flash-able rom as well as the SP tools flash-able one. but the same issue.
I followed below three routes:
1. Flashed stock rom .16 to make the phone factory state.
2. Then first tried flashing .20 update. Flashed successfully, but the screen started blinking as soon as the phone rebooted, i.e. right when the boot animation starts. I disabled auto brightness as well as disabled HW overlay. but the issue stayed.
3. I again flashed .16 and then 4.2.1 updated rom, first as 'Download' option in SP flash tools, but the same issue occured. I then tried, 'Firmware upgrade' still the same issue.
4. flashed .16 again; flashed TWRP, tried the tweaked zip flash-able rom, but same issue.
5. Tried custom ROM JellyDemon v2.2, the phone was not stuck at bootscreen.
6. in so much of flashing lost IMEI. so, flashed stock .16 again, installed TWRP, extended phone storage to 2.5 GB flashed Jellyxperia 4.1.2 based custom rom, swapped internal storage and then used Mobileuncle MTK toolkit to restore IMEI (I had used the same earlier to backup the IMEI to external SD card.
So, basically I'm back to square one after spending almost 8 hours to get 4.2 update :crying:. If only the blinking screen issue could be fixed :crying:
Click to expand...
Click to collapse
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
sweetrascal said:
i tried almost everything u tried, now back to stock .16 , all other roms had the screen flickering issue, never tried jellyxperia though, are u using jellyxperia now?? have u found any solution?? is jellyxperia facing the same problem?? thanks
Click to expand...
Click to collapse
I'm using Jellyxperia. it does not have blinking issue as it is based on 4.1.2.
It's faster than stock and I like the Walkman music player. However, I noticed that battery drains faster comparing to stock 4.1.2.
My collegue in office used to play Temple Run Brave during the complete office period with breaks of about 10-20 mins (he was serving notice period ). but the battery used to be at 30-40%.
But yesterday, the battery was down to 10% much before.
However, I would be sure only after a few days usage.
hi all
i have a problem with my root..
as you see the pictures that i have a root but super su is not updating and i cant enter the recovery and xposed installer didnt update framework.
what was happened i dont know and how can i solve this issue?
thanks
LiberOz said:
hi all
i have a problem with my root..
as you see the pictures that i have a root but super su is not updating and i cant enter the recovery and xposed installer didnt update framework.
what was happened i dont know and how can i solve this issue?
thanks
Click to expand...
Click to collapse
Its those awful navigation buttons you've used. Or possibly RIC disabling system writing.
Dear All,
I have a Lenovo P780 with Jelly Bean 4.2.1 and KingUser root SU version 3.43 and software version 4.0.2.87.
My problem is whenever I want to go to the Settings panel, or any sub-option I've made a shortcut for, the phone shows "app isn't installed".
Has anyone had this issue and how to solve this? I prefer not to go the all re-root process as you can understand because I'd have to reinstall everything.
Regards,
choo
d8v8n8 said:
Dear All,
I have a Lenovo P780 with Jelly Bean 4.2.1 and KingUser root SU version 3.43 and software version 4.0.2.87.
My problem is whenever I want to go to the Settings panel, or any sub-option I've made a shortcut for, the phone shows "app isn't installed".
Has anyone had this issue and how to solve this? I prefer not to go the all re-root process as you can understand because I'd have to reinstall everything.
Regards,
choo
Click to expand...
Click to collapse
I do not think your problem is solved by rooting again ! here you have some storage problem !
I think a new flash o your rom will solve the problem ! what you are telling here not even settings works !
More detailes please !
How did your problem first started ?
stympy said:
I do not think your problem is solved by rooting again ! here you have some storage problem !
I think a new flash o your rom will solve the problem ! what you are telling here not even settings works !
More detailes please !
How did your problem first started ?
Click to expand...
Click to collapse
Well I wanted to downgrade KingUser and used a Titanium Backup I had because the phone seemed to have lots of new small apps I didn't install and linked to Lenovo. Thus, I did a App+Data restore and since it's acting up that way. I click on Settings, it says the app isn't installed. Contact the Manufacturer.
I tried to restore to the last KingUser version including the data that was backed up at that time but still the problem persists.
Thanks stympy for taking interest in my problem.
d8v8n8 said:
Well I wanted to downgrade KingUser and used a Titanium Backup I had because the phone seemed to have lots of new small apps I didn't install and linked to Lenovo. Thus, I did a App+Data restore and since it's acting up that way. I click on Settings, it says the app isn't installed. Contact the Manufacturer.
I tried to restore to the last KingUser version including the data that was backed up at that time but still the problem persists.
Thanks stympy for taking interest in my problem.
Click to expand...
Click to collapse
Hmmm... Try this ! Look for Framaroot here on XDA. Try to root with Framaroot and see what happent !
stympy said:
Hmmm... Try this ! Look for Framaroot here on XDA. Try to root with Framaroot and see what happent !
Click to expand...
Click to collapse
That's the first root I tried sometime ago when KingUser wouldn't give me full privileges so I'd rather not go that route again.
Any other ideas or do I have to swallow the pill and re-root with the latest King User version I have and reinstall everything. I seem to have problems with many apps and restoring them from TB by the way. I don't know if it's my phone or not but system files don't agree with it.
d8v8n8 said:
That's the first root I tried sometime ago when KingUser wouldn't give me full privileges so I'd rather not go that route again.
Any other ideas or do I have to swallow the pill and re-root with the latest King User version I have and reinstall everything. I seem to have problems with many apps and restoring them from TB by the way. I don't know if it's my phone or not but system files don't agree with it.
Click to expand...
Click to collapse
Reroot !
stympy said:
Reroot !
Click to expand...
Click to collapse
Yep, I'm afraid I have to that :crying: and hopefully all will go well :fingers-crossed:
Thanks stympy
d8v8n8 said:
Yep, I'm afraid I have to that :crying: and hopefully all will go well :fingers-crossed:
Thanks stympy
Click to expand...
Click to collapse
You are wellcome !
If you dont i have alot of ROMS ready !
Hello, The rear camera of my lenovo doesn't work. It is model 2014 and after downgrade from kit-kat it just stops. I saw in some forums, that I have to change the apk file for the camera, but can't do it. Nothing happens when I install it normaly. Some say, that it has to be instalet via total comander or recovery consol. But I don't know how to do that. Any ideas?
S136 stock rom.
grafcheto said:
Hello, The rear camera of my lenovo doesn't work. It is model 2014 and after downgrade from kit-kat it just stops. I saw in some forums, that I have to change the apk file for the camera, but can't do it. Nothing happens when I install it normaly. Some say, that it has to be instalet via total comander or recovery consol. But I don't know how to do that. Any ideas?
S136 stock rom.
Click to expand...
Click to collapse
How did u downgraded from KK to JB??
Also is ur phone rooted right now???
Sent from my HM NOTE 1W using XDA Free mobile app
grafcheto said:
Hello, The rear camera of my lenovo doesn't work. It is model 2014 and after downgrade from kit-kat it just stops. I saw in some forums, that I have to change the apk file for the camera, but can't do it. Nothing happens when I install it normaly. Some say, that it has to be instalet via total comander or recovery consol. But I don't know how to do that. Any ideas?
S136 stock rom.
Click to expand...
Click to collapse
Hi. Your phone is made after 07.2014. It is a new hardware for camera. Try to study the forum in development area and see what firmware is compatibile for your phone.
There are some patches for this problem.
Yes, it's rooted. The downgrade was hard at first, because I used flash tool, that is not wright and the phone won't start. But when I found the wright version, it was wasy.
Camera works with kit-kat, but I don't want to use it, so I have to find something older to use.
grafcheto said:
Yes, it's rooted. The downgrade was hard at first, because I used flash tool, that is not wright and the phone won't start. But when I found the wright version, it was wasy.
Camera works with kit-kat, but I don't want to use it, so I have to find something older to use.
Click to expand...
Click to collapse
Hi all ! Try this 2 tools and give us some feedback!
How to install this fixes? I can't do it into recovery.
grafcheto said:
How to install this fixes? I can't do it into recovery.
Click to expand...
Click to collapse
You cannot install from TWRP ? What error do you have ?
Nothing. Just "instalation aborted". I don't think that I had success to install anything using recovery.
grafcheto said:
Nothing. Just "instalation aborted". I don't think that I had success to install anything using recovery.
Click to expand...
Click to collapse
What kind of recovery you have?
It is strange, because this zip files are for recovery.
Sent from my Lenovo P780
I don't kno how to see which type of recovery I have. But I think, that there is a problem with it. As I sad, nothing installs via this method.
I think, that the recovery comes with row s136. I installed some type of CMD recovery ver. 6, but after I try to use it, the second time the phone brokes and it won't star. So I have to flash again with row s136. Maybe I have to change the recovery with some other?
grafcheto said:
I don't kno how to see which type of recovery I have. But I think, that there is a problem with it. As I sad, nothing installs via this method.
Click to expand...
Click to collapse
TWRP is looking like this picture.
Do you have recovery like this ?
No. Mine was with the android robot on his back. I installed TWRP, than use it to install the fix file. Everything looks ok. After that I have message in the consol, that my phone wasn't rooted and if I want to root it. I swipe for yes, reboot and now it freeses on the lenovo logo... I have to flash again.
Second attepmt - the same. Something makes the phone to stop working, after I use recovery.
On the 3-4 attept I succeed to install some things, including CameraFixFull 15 - 08.2014 phones.zip - [Click for QR Code] , but nothing changes. I think, that maybe the recovery is not rigth? It says, that the instalation is successifull, but nothing appears to be changed.
I have similiar problem but after installing patches, the phone is becoming bricked and I had to restore beckup system... Any other ideas. My OS is Life 0.7
jpiter said:
I have similiar problem but after installing patches, the phone is becoming bricked and I had to restore beckup system... Any other ideas. My OS is Life 0.7
Click to expand...
Click to collapse
Try to flash stock KitKat firmware. After flash see if the camera is working. If not... my opinion is that you have on big hardware problem.
Hi,
After successful rooting and rebooting, i have hit "Cleanup to switch to another superuser app" and now, cannot boot. Phone stays with Mi logo and constanty loops with screen blink.
Tried to go to recovery mode, reinstall SuperSU, clean cache, but no luck.
Kindly asking for help.
Flash fastboot rom and root again.
tried, didnt help.
TWRP loads ok. SR3-SuperSU-v2.79 also installs, cache wiped/dalvik, all same
at4500 said:
tried, didnt help.
TWRP loads ok. SR3-SuperSU-v2.79 also installs, cache wiped/dalvik, all same
Click to expand...
Click to collapse
Wipe data, cache, and dalvik, and reinstall your ROM. You will lose all your data, downloaded apps, and settings (I hope you made backups of them), but you will have your phone back.
at4500 said:
Hi,
After successful rooting and rebooting, i have hit "Cleanup to switch to another superuser app" and now, cannot boot. Phone stays with Mi logo and constanty loops with screen blink.
Tried to go to recovery mode, reinstall SuperSU, clean cache, but no luck.
Kindly asking for help.
Click to expand...
Click to collapse
Reinstall rom as DarthJabba said and also start using Magisk instead of SuperSu, since its more compatible and stable.
MyNameIsRage said:
Reinstall rom as DarthJabba said and also start using Magisk instead of SuperSu, since its more compatible and stable.
Click to expand...
Click to collapse
Thanks, this made my day, finally decided to opt for reflashing.
Here is a good vid guide for ones who do it first time in life:
u tube dot com slash watch?v=mfXd5E-Ix6w
Will look for magisk now. Thanks again. Phone is usable now.
at4500 said:
Thanks, this made my day, finally decided to opt for reflashing.
Here is a good vid guide for ones who do it first time in life:
u tube dot com slash watch?v=mfXd5E-Ix6w
Will look for magisk now. Thanks again. Phone is usable now.
Click to expand...
Click to collapse
Good news. You probably only needed to wipe the data partition - but you might as well start afresh.
BTW, I have been using supersu for a long time, without any problems. So I would very much doubt whether rooting via supersu was the cause of the problem. I suspect that the problem might have been caused by "Cleanup to switch to another superuser app". I have not done that in years, and I am not sure why anyone would want to do it now.
There is no harm trying magisk, but I prefer supersu myself.
DarthJabba9 said:
.. I suspect that the problem might have been caused by "Cleanup to switch to another superuser app". ..
Click to expand...
Click to collapse
Right, this is (silly of me) exactly what i did.